Professional Documents
Culture Documents
Engine Technology
Low emission, complies Tier 4 Interim & EU Stage III B regulation
Low noise, meet EU 2nd noise regulation
Pump Compartment
Industry-leading, powerful, reliable Kawasaki designed, variable volume in-line axial piston pumps
New compact solenoid block equipped with 4 solenoid valves, 1 EPPR valves, 1 check valve
accumulator and pilot filter - controls 2 speed travel, power boost, boom priority, safety lock
RMS (Remote Management System) works through GPS/satellite technology to ultimately provide
better customer service and support.
Undercarriage
Sealed track chain (urethane seals) / Standard track rail guard / Comfortable bolt-on steps
Large upper roller cut-outs for debris clean-out / Tapered side frames for debris clean-out / Grease-
type track tensioner
*Photo may include optional equipment.
2/3
PRECISION
Innovative hydraulic system technologies make the 9A series excavator fast,
smooth and easy to control.
P (Power Max) mode maximizes machine speed and power for mass production.
S (Standard) mode provides a reduced, fixed rpm for optimum performance and
Power Mode improved fuel economy. For maximum fuel savings and improved control, E (Economy)
mode provides precise flow and engine power based on load demand. Three unique
power modes provide the operator with custom power, speed and fuel economy.
The work mode allows the operator to select single flow attachments like a hydraulic
Work Mode breaker or bi-directional flow attachments like a crusher. Flow settings unique to each
attachment can be programmed from within the cluster.
Some jobs require more precise machine settings. Using the versatile U (User) mode, the
User Mode operator can customize engine speed, pump output, idle speed and other machine
settings for the job at hand.
4/5
PERFORMANCE
9A series is designed for maximum performance to keep the
operator working productively.
*Photo
*Photo may include
may include optional
optional equipment.
equipment.
Track Rail Guard & Adjusters
Durable track rail guards keep track links in place.
Track adjustment is made easy with standard grease cylinder track adjusters and shock absorbing
springs.
Area mandating the use of DPF are increasing and european air
quality directive will drive more non-attainment zones. Because our Min. swing radius Rear-end swing radius
products use DPFs, our customers don't have to offer a retrofit DPF 2,340mm 1,495mm
6/7
8/9
PREFERENCE
Operating a 9A series is unique to every operator. Operators can fully customize
their work environment and operating preferences to fit their individual needs.
Reduced Stress
Work is stressful enough. Your work environment should be stress free. Hyundai's 9A series
provides improved cab amenities, additional space and a comfortable seat to minimize stress to
the operator. A powerful climate control system provides the operator with optimum air
temperature. An advanced audio system with USB player, AM/FM stereo and MP3 capabilities,
plus remotely located controls is perfect for listening to music favorites.
Operators can even talk on the phone with the hands-free cell phone feature. Also, the newly
designed remote control offers radio hands-free function.
Horizontal
Total : 150 o
Vertical
Total : 30o
8/9
PROFITABILITY
9A series is designed to maximize profitability through improved
efficiencies, enhanced service features and longer life components.
Easy Access
Ground-line access to filters, lube fittings, fuses, machine computer
components and wide open compartments makes service more
convenient on the 9A series.
Long-Life Components
9A series excavators were designed with bushings designed for long-life lube intervals
(250 hrs) & polymer shims (wear resistant, noise reducing), long-life hydraulic filters
(1,000hrs), long-life hydraulic oil (5,000hrs), more efficient cooling systems and
integrated preheating systems which extend service intervals, minimize operating
costs and reduce machine down time.
10/11
Specifications
ENGINE SWING SYSTEM
MODEL Perkins 1204E Swing motor Fixed displacement axial piston motor
Swing reduction Planetary gear reduction
Water cooled, 4 cycle Diesel,
Swing bearing lubrication Grease-bathed
Type 4-cylinders in line, direct injection,
Swing brake Multi wet disc
turbocharged charger and air cooled
Swing speed 12.6 rpm
J1995 (gross) 124 HP (92.7 kW) / 1,950 rpm
Rated SAE
J1349 (net) 116 HP (87 kW) / 1,950 rpm
flywheel
6271/1 (gross) 126 PS (92.7 kW) / 1,950 rpm
horse power DIN
6271/1 (net) 118 PS (87 kW) / 1,950 rpm
Max. torque 54.0 kgf.m(391 lbf.ft)/ 1,400 rpm
COOLANT & LUBRICANT CAPACITY
Refilling liter US gal UK gal
Bore X stroke 105 x 127 mm (4.1” x 5.0”)
Fuel tank 210 61.3 51.0
Piston displacement 4,400cc (268.5 in ) 3
SAE 0.30 (0.39) 0.40 (0.52) 0.45 (0.59) 0.50 (0.65) 0.59 (0.77)
heaped
m (yd )
3 3
● : Applicable for materials with density of 2,000 kg /m3 (3,370 lb/ yd3) or less
■ : Applicable for materials with density of 1,600 kg /m3 (2,700 lb/ yd3) or less
▲ : Applicable for materials with density of 1,100 kg /m3 (1,850 lb/ yd3) or less
ATTACHMENT
Booms and arms are welded, a low-stress, full-box section design. 4.3m(14’ 1”) boom and 1.96m(6’ 5”), 2.26m(7’ 5”), 2.81m(9’ 3”)arms are available.
DIGGING FORCE
Length mm (ft.in) 4,300 (14’ 1”)
Boom
Weight kg (lb) 950 (2,090)
Remarks
Length mm (ft.in) 1,960 (6’ 5”) 2,260 (7’ 5”) 2,810 (9’ 3”)
Arm
Weight kg (lb) 320 (710) 340 (750) 400 (880)
kN 78.5[85.6] 78.5[85.6] 78.5[85.6]
SAE kgf 8,000[8,730] 8,000[8,730] 8,000[8,730]
Bucket
lbf 17,640[19,240] 17,640[19,240] 17,640[19,240]
digging
kN 90.2[98.4] 90.2[98.4] 90.2[98.4]
force
ISO kgf 9,200[10,040] 9,200[10,040] 9,200[10,040]
[ ]:
lbf 20,280[22,120] 20,280[22,120] 20,280[22,120]
Power
kN 60.2[65.7] 55.7[60.8] 48.1[52.4]
Boost
SAE kgf 6,140[6,700] 5,680[6,200] 4,900[5,350]
Arm
lbf 13,540[14,770] 12,520[13,660] 10,800[11,780]
crowd
kN 62.9[68.6] 58.1[63.3] 49.7[54.2]
force
ISO kgf 6,410[6,990] 5,920[6,460] 5,070[5,530]
lbf 14,130[15,410] 13,050[14,240] 11,180[12,200]
Note: Boom weight includes arm cylinder, piping, and pin
Arm weight includes bucket cylinder, linkage, and pin
12/13
Dimensions & Working Range
R125CR-9A DIMENSIONS
D,D' E
J F
C
G
A H
B K
I L
mm (ft.in)
D,D' E
J F
C
G
A H
B K
I L
mm (ft.in)
14/15
Dimensions & Working Range
R125CR-9A (DOZER TYPE) DIMENSIONS
D,D' E
J F
C
O M G
N
A H
B K
I L
mm (ft.in)
J F
C
O M G
N
A H
B K
I L
mm (ft.in)
16/17
Lifting Capacity
R125CR-9A Rating over-front Rating over-side or 360 degree
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
18/19
Lifting Capacity
R125LCR-9A Rating over-front Rating over-side or 360 degree
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 2.26 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 1.96 m (7’ 5”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
Boom : 4.3 m (14’ 1”) / Arm : 2.81 m (9’ 2”) / Bucket : 0.40 m SAE heaped / Shoe : 500mm(20”) triple grouser
3
20/21
Notes
Notes
STANDARD EQUIPMENT OPTIONAL EQUIPMENT
ISO Standard cabin Fuel filler pump (35 L/min)
All-weather steel cab with 360 visibility
O
Beacon lamp
Safety glass windows Safety lock valve for boom cylinder with overload warning device
Rise-up type windshield wiper Safety lock valve for arm cylinder
Sliding fold-in front window Single-acting piping kit (breaker, etc.)
Sliding side window(LH) Double-acting piping kit (clamshell, etc.)
Lockable door Quick coupler
Hot & cool box Travel alarm
Storage compartment & Ashtray Booms
Transparent cabin roof-cover 4.3 m, 14’ 1”
Radio / USB player Arms
Handsfree mobile phone system with USB 1.96 m, 6’ 5”
12 volt power outlet (24V DC to 12V DC converter) 2.26 m, 7’ 5”
Sun visor 2.81 m, 9’ 3”
Computer aided power optimization (New CAPO) system Cabin FOPS/FOG (ISO/DIS 10262) Level II
3-power mode, 2-work mode, User mode FOPS (Falling Object Protective Structure)
Auto deceleration & one-touch deceleration system FOG (Falling Object Guard)
Auto warm-up system Cabin lights
Auto overheat prevention system Cabin front window rain guard
Automatic climate control Track shoes
Air conditioner & heater Rubbber pad (500mm, 20”)
Defroster Triple grousers shoe (500mm, 20”)
Self-diagnostics system Triple grousers shoe (600mm, 24”)
Starting Aid (air grid heater) for cold weather Triple grousers shoe (700mm, 28”)
Centralized monitoring Track pad (500mm, 20”)
LCD display Lower frame under cover (Additional)
Engine speed or Trip meter/Accel. Long crawler lower frame
Clock Dozer blade
Gauges Tool kit
Fuel level gauge Rearview camera
Engine coolant temperature gauge Hi-mate (Remote Management System)
Hyd. oil temperature gauge Seat
Warnings Air suspension seat with heater
Check engine
Communication error
Low battery
Air cleaner clogging
Indicators
Max Power
Fuel warmer
Auto idle
Door and cab locks, one key
Two outside rearview mirrors
Mechanical suspension seat with heater
Four front working lights
Electric horn
Batteries (2 x 12V x 72 AH)
Battery master switch
Removable clean-out screen for cooler
Automatic swing brake
Removable reservoir tank
Fuel pre-filter with fuel warmer
Boom holding system
Arm holding system
Track shoes (500mm, 20”) * Standard and optional equipment may vary. Contact your Hyundai dealer for
Track rail guard more information. The machine may vary according to International standards.
Accumulator for lowering work equipment * The photos may include attachments and optional equipment that are not
Electric transducer available in your area.
Lower frame under cover (Normal) * Materials and specifications are subject to change without advance notice.
Cabin Rops (ISO 12117-2) * All imperial measurements rounded off to the nearest pound or inch.
ROPS (Roll Over Protective Structure)
PLEASE CONTACT