Professional Documents
Culture Documents
Australian Weighing
Australian Equipment
Weighing Offers
Equipment Complete
Offers Materials
Industrial Handling,
Weighing Filling,
Solutions Packaging
Built To Last & Weighing Solutions
APE-7 Bending Beam Load Cell
The APE-7 Stainless Steel IP68 Bending Beam load cell has been designed for long-term
performance in harsh environments. Part of a wide range of high quality IP68 load cell
environment rating, the AWE APE-7 Bending Beam is ruggedly built from the finest stainless steel
used for load cell construction.
It allows the use of strong fastening bolts and ruggedly built attachments for secured mounts with
its generously sized attachments and finely-bored through holes.
Compliant with Australian & International Standards of measurement, the APE-7 dimensions and
mountings enable the easy replacement of other brands in most cases direct hole centres and
outputs. Its laser-welded stainless steel construction provides an armor and shield to internal
parts ensuring a hermetically sealed unit. It carries an IP68 environment protection rating with its
welded seal construct.
The APE-7 load cell is adapted for long-term use and extremely durable to outlast any other
competitor in the market today. Its versatility is in demand for weighing now and in the
foreseeable future in Australia and across the globe.
A wide selection of accessories is available for our range of load cells. Accessories render your
application more cost effective while meeting your requirements for strength and durability.
+ Excitation - Signal
- Excitation Shield
+ Signal
Your Weighing System Is Only As Reliable As The Load Cell, Which Is The Heart Of Any
Weighbridge. The load cells are highly accurate transducers, designed to sense force or weight
under a wide range of adverse conditions. They’re the most essential part of an electronic
weighing system, but also the most vulnerable.
The sensing or spring element is designed in such a way it develops a strain, directly proportional
to the load applied. The strain gages, are usually connected in a multiple of four, called a
Wheatstone bridge configuration. This converts the very small change in resistance into a usable
electrical signal. Load cells may be damaged because of (shock) overloading, lightning strikes or
heavy surges in current, chemical or moisture ingress, mis-handling (dropping, lifting on cable,
etc.), vibration, seismic events or internal component malfunctioning. The load cell needs to be
properly sealed against the environment.
Our
Hermetically sealed, load cells are made from 17-4PH steel - which offers the best
performance qualities of any alloy. Hermetically sealed, load cells are more expensive than
other load cells due to the additional costs of sealing the load cell
Hermetic
sealing will ensure the integrity of your strain gauge section of the cell in corrosive
or wash down applications. A true hermetically sealed load cell incorporates a welded header
cover over the gauge cavity where the cable is attached. The welded header is the key to
preventing moisture enetrating the inner load cell
If
you choose to use a non-hermetic cell to save some dollars, in a washdown application, and
you have to keep changing the loadcell due to failure from moisture,then the cost is much
greater than using a hermetically sealed load cell in the first place.
A load cell is a force sensor which receives a voltage (excitation) from a regulated power source
(usually a digital indicator or signal conditioner) and sends back a low voltage signal (signal)
when force is applied. The load cell signal is converted to a visual or numeric value by a “digital
indicator”. When there is no load on the cell the two signal lines are at equal voltage. As a load
is applied to the cell, the voltage on one signal line increases very slightly and the voltage on the
other signal line decreases very slightly. The difference in voltage between the two signals is read
by the indicator in mV.
The load cell core is usually made of good quality steel or aluminium. The circuit consists of
precision foil resistors called strain gauges connected in a configuration called a Wheatstone
bridge. The gauges are bonded very securely to the metal where they sense very small deflections
in the metal caused by the load being applied to the cell. Because the signal levels are very small,
the circuit must be protected from all outside influences such as moisture, physical damage or
electrical interference.
Australian Weighing Equipment Riteweigh Scales
Sydney +61 2 8717 3333 Melbourne +61 3 9330 1011 Brisbane +61 7 3423 1388
www.awe.com.au
APE-7 Bending Beam Load Cell
Capacity Size mm
kg AB CD EF GH 1 2 3 4
10-200 123.0 13.0 18.0 82.0 45.0 59.0 22.0 20.0 45.08 .5 26.0 35.08 .5
300-1000 210.0 15.0 40.0 133.0 93.06 4.03 4.0 25.06 0.0 13.03 6.0 50.01 4.0
www.awe.com.au
Shear Beam 50kg Steel Stainless Hermetically 2.0mV/V 385 Ω ± 385 Ω ±
Suitable for hopper scale IP68
GS-AGX-1 –20,000kg 17-4PH Sealed ± 0.1% 10 Ω 10 Ω
25kg - Steel Stainless Hermetically 2.0mV/V 385 Ω ±
GS2107 IP68
5,000kg 17-4PH Sealed ± 0.1% 10 Ω
Steel Stainless
Sydney +61 2 8717 3333 Melbourne +61 3 9330 1011 Brisbane +61 7 3423 1388
Aircraft Grade 2.0mV/V 410 Ω ± 350 Ω ±
GSPE-2 Suitable for electronic platform 3 kg -100 kg
scale Aluminium ± 0.20% 10 Ω 3Ω
Suitable for electronic platform 50 kg - 1000 Aircraft Grade 2.0mV/V 410 Ω ± 350 Ω ±
GSPE-5 scale kg Aluminium ± 0.20% 10 Ω 3Ω
Tension 1.5mv/V 765 Ω ± 700 Ω ±
Special load cell for crane scale 1 t - 30 t Alloy Steel
GSET-1 ± 0.01 15 Ω 5Ω
Specifically designed for 1.5mv/V 385 Ω ± 350 Ω ±
GSET-4 weighing heavy duty products 1T - 10T IP67 Alloy Steel Potted Welded ± 0.015 10 Ω 3Ω
while lifting
Ideal for multiple load cell
compression applications
AUSTRALIAN WEIGHING EQUIPMENT
Jeff & Trevor Baillie started AWE in 1981, Our response, “AWE understands that most
focusing on weighing solutions based on equipment operate in a rugged environment.
engineering principles. For the last 30 years They cop a pounding. We must engineer
AWE has built its reputation as a leading to survive these conditions, because our
supplier of robust industrial weighing reputation depends on this. So we prefer to
equipment and solutions provider. Our build based on our experience to anticipate
innovative engineering, and continuous product overloading situation, to meet these demands.
improvement have led to designs that will AWE’s equipment are built to “Our Standards”
stand up to the rigours and demands your to protect your investment.
operators and machinery will throw at it.
You can choose from our standard model or
If you need your weighing solution to stand consult with our inhouse engineers, design
up to punishing abuse, then you require 3 and manufacturing facility, together with our
components: Strength, Reliability and Qualified network of consultants and agents around the
Trades People/Service. world, we are able to offer a complete custom
built solution for your weighing needs.
The biggest compliment we hear is, “Your
weighing equipment is Over Engineered”.
To deliver on our commitment of providing quality, reliable weighing solutions, AWE understands
it’s more than just delivering a well built & designed weighing solution, it also requires a team of
dedicated people who care and are there to back you up with great Service & Support.
The quality of our team sets us apart. Most companies choose to outsource these services
to contractors, or buy machinery from overseas as a so called agent. They do not have the
knowledge base to support or maintain their equipment long term.
AWE’s solutions are designed to fit your factory systems, to do this requires a team of
professionally trained tradesmen.
Bradwood Packaging & Packaging Machinery prides itself on providing plain english
proposals, there’s no hidden surprises. You’ll know what you’re getting.
So if you have questions about factory layout and packaging equipment, then talk to
Bradwood Packaging & Packaging Machinery about our solutions.
Call or email us today and find out how our sales team and project engineers can assist
you in finding the best Packing & Bagging solution for your needs.
Australian Weighing All State Machining P/L Rite-Weigh Scales P/L Bradwood Packaging P/L Dendy Packaging (Australia) P/L China Weighing &
Equipment P/L Bradwood Packaging P/L Bendfab P/L Dendy Packaging (Australia) Packaging Machinery
Dealer’s Information:
For Links to AWE Website please
scan your smartphone here