Professional Documents
Culture Documents
2018-2019 C008B
USING THIS CATALOGUE
1. This catalogue is as of April 2017.
2. Please note that products in this catalogue are continuously reviewed and updated. The products therefore may be
changed in the future and thus become different from the catalogue.
3. Stock status is mentioned for the products in this catalogue. However, please note that the products here may be
replaced by new grades and products in the future.
(Note) Please contact us regarding order numbers and grades that are not mentioned in this catalogue.
1.Search for tool types from the INDEX at the beginning of the catalog.
• Turning tools are classified by a green colour.
• Milling tools are classified by a blue colour.
(Drilling tools are classified by a red colour.)
2.To find the series of products from the contents of the inside title.
Contents of each block are listed on each inside title.
4.Search using the index of symbol designations at the end of the catalog.
All tools are listed in the alphabetical index at the front of the catalogue.
http://www.carbide.mht.co.th/download/tools_news
http://www.mitsubishicarbide.net/mht/enuk/
INFORMATION 4
197
TURNING TOOLS
EXTERNAL TURNING TOOLS 289
GROOVING 453
THREADING 589
DRILLING 1621
INDEX 2030
3
4
Now available!
A magazine for communication to encourage excitement about manufacturing
5
Machining
Technology Center
RESPONSIVE, ATTRACTIVE,
PROACTIVE
Mitsubishi Materials Corporation, Advanced Materials & Tools
Company, offers a “Comprehensive Craftsman Studio” which addresses
the individual needs and requirements of our customers’ in order to make
their business successful. Here the Machining Technology Center is the
front-line base. It is fully equipped with advanced machines, measuring
instruments, extensive cutting data, knowledge, technologies as well as
having a team of highly-experienced technical staff members. All of which
allows Mitsubishi Materials Corporation to offer the best solution and
services for our valued customers.
MTEC Valencia (Espana) MTEC Bangkok (Thailand) MTEC TianJin (China) MTEC Chicago (USA)
6
We try answering any questions and demands from customers around
the world and providing detailed solutions as well as meeting customers’
expectations along with a sustainable growth of technical skills and services.
応
RESPONSIVE
1
Training
Technical
Support Machining
3
Technology
Center
攻 Cutting Test
2 魅
PROACTIVE ATTRACTIVE
1
Practical “Hands-on” training with real demonstration
TRAINING
y Cutting Academy y e-learning
y Regional seminar y Requested Seminar
2
Visualizing your machining
CUTTING TEST
y Test Cutting
■ Selection of optimal machining conditions
■ Improvements in tool life and machining quality
■ Predictive tests before line input
3
y High-speed camera/ Cutting force/ 3D measuring device etc.
TECHNICAL SUPPORT
y Production line diagnosis/ Process improvement
y Tooling
y Cutting Simulation y Telephone Technical counseling
http://www.carbide.mht.co.th/solution/purpose
For details, please contact your nearest sales office. (Refer to "Domestic Sales Offices" at the end of the catalog)
7
We have enhanced our cutting tool data
provision compliant with ISO13399.
1. What is ISO 13399?
International standard with Cutting tool data representation and exchange.
Cutting tools are required to have parameters up to the world standards like in the regulation of the
database and CAD data. Another purpose of ISO 13399 is to establish smooth data communication
between systems.
2. Purpose
Troublesome conversion with the manufacturers is unnecessary when you have cutting tool data that
complies with ISO 13399. This can then be imported to PLM, CAM, CAM, CNC, or even as a tool
management system.
Mitsubishi Materials offers cutting tool data based on ISO 13399 to support effectively improved quality
and cost reduction efficiency in your improved threading and new products creation.
Re RE
øD2
D1
z Inserts
80° D1 S1 80° IC S
WF
B
B
F1
x Holder
95° KAPR
L2 LH
L1 LF
øD12 DCSFMS
øD9 DCON
L8
W1
L8
KWW
CBDP
LCCB
L7
*L
c Milling Cutter
L1
LF
KAPR
øD8 45° DAH
APMX
ap
*øD DCCB
øD1 DC
øD2 DCX
PL LF
SIG 140°
DCON
140°
øD1
øD4
DC
v Solid Drills
L3 LU
L2 LCF
L1 LH
OAL
8
5. CAD (ISO13399 compliance)
As shown below, DXF (2 dimensions) and STEP (3 dimensions) data complying with ISO 13399 are
updated regularly to the Web CATALOG.
zDXF xDXF
(Full layer) (CUT/NO CUT layer)
Ex. IMX10C4HV100R05010
PCS
MCS
Y
Z
X CIP
*Note http://www.mitsubishicarbide.net/contents/mht/enuk/manual/manual.pdf
1 Refer to the following URL for more information.
*Note 2 CAD is updated regularly. However, in rare cases, it may not be possible to provide the desired product.
Please consult us.
9
Dimensions and symbols (ISO 13399 compliance)
Alphabetical
z Inserts x Turning
Symbol Content Symbol Content
AN Clearance angle major B Shank width
AS Clearance angle wiper edge CDX Cutting depth maximum
BCH Corner chamfer length CSP Coolant supply property
BS Wiper edge length CUTDIA Work piece parting diameter maximum
CDI Insert cutting diameter CW Cutting width
CDX Cutting depth maximum DAXN Axial groove outside diameter minimum
CECC Cutting edge condition code DAXX Axial groove outside diameter maximum
CEDC Cutting edge count DCON Connection diameter
CF Spot chamfer DMIN Minimum bore diameter
CNC Corner count DMM Shank diameter
CW Cutting width ECA End chamfer angle
D1 Fixing hole diameter ECD End chamfer distance
EPSR Insert included angle GAMF Rake angle radial
GAN Insert rake angle GAMN Rake angle normal
HAND Hand GAMO Rake angle orthogonal
IC Inscribed circle diameter GAMP Rake angle axial
INSL Insert length H Shank height
KRINS Cutting edge angle major HAND Hand
L Cutting edge length HBH Head bottom offset height
LBB Chip breaker width HBKW Head back offset width
LE Cutting edge effective length HBL Head bottom offset length
LF Functional length HF Functional height
M m-dimension HTB Body height
NT Tooth count KAPR Tool cutting edge angle
PAL Rrofile angle left hand LAMS Inclination angle
PAR Rrofile angle right hand LB Body length
PDPT Profile depth insert LDRED Reduced body diameter length
PDX Profile distance ex LF Functional length
PDY Profile distance ey LH Head length
PNA Profile included angle LPR Protruding length
PSIRL Cutting edge angle major left hand LS Shank length
PSIRR Cutting edge angle major right hand LTA LTA length (length from MCS to CRP)
RAL Relief angle left hand LU Usable length
RAR Relief angle right hand OAH Overall height
RE Corner radius OAL Overall length
REL Corner radius left hand OAW Overall width
RER Corner radius right hand PSIR Tool lead angle
S Insert thickness TQ Torque
SC Insert shape code WF Functional width
SIG Point angle
TC Tolerance class insert
THFT Thread form type
THL Threading length
TP Thread pitch
TPI Threads per inch
TPT Thread profile type
TTP Thread type
W1 Insert width
*Note 1 This symbol complies with TS standard or DTS standard of ISO 13399.
*Note 3 Changes and additions may be made because the table above also includes symbols under deliberation.
Note 2 The above does not include the unset symbols or original Mitsubishi Materials symbols of ISO 13399.
*
10
mpliance)
c Milling v Drilling
Symbol Content Symbol Content
APMX Depth of cut maximum BD Body diameter
AZ Plunge depth maximum CDI Insert cutting diameter
BD Body diameter CND Coolant entry diameter
BDX Body diameter maximum CNT Coolant entry thread size
BHTA Body half taper angle CRKS Connection retention knob thread size
BMC Body material code CSP Coolant supply property
CBDP Connection bore depth CXD Coolant exit diameter
CCMS Connection code machine side CZC Connection size code
CCWS Connection code workpiece side DC Cutting diameter
CICT Cutting item count DCON Connection diameter
CRKS Connection retention knob thread size DCSFMS Contact surface diameter machine side
CSP Coolant supply property DMM Shank diameter
CW Cutting width FHA Flute helix angle
DAH Diameter access hole HAND Hand
DBC Diameter bolt circle LBX Body length maximum
DC Cutting diameter LCF Length chip flute
DCB Connection bore diameter LF Functional length
DCCB Counterbore diameter connection bore LH Head length
DCIN Cutting diameter internal LPR Protruding length
DCINN Cutting diameter internal minimum LU Usable length
DCINX Cutting diameter internal maximum NOF Flute count
DCN Cutting diameter minimum OAL Overall length
DCON Connection diameter PL Point length
DCONMS Connection diameter machine side RPMX Rotational speed maximum
DCONWS Connection diameter workpiece side SDL Step diameter length
DCX Cutting diameter maximum SIG Point angle
DCSFMS Contact surface diameter machine side ULDR Usable length diameter ratio
DMM Shank diameter ZEFF Face effective cutting edge count
DN Neck diameter ZEFP Peripheral effective cutting edge count
HAND Hand
GAMF Rake angle radial b Others
GAMP Rake angle axial Symbol Content
KAPR Tool cutting edge angle ASP Adjusting screw protrusion
KWW Keyway width BD Body diameter
LAMS Inclination angle CBDP Connection bore depth
LCCB Counterbore depth connection bore CRKS Connection retention knob thread size
LE Cutting edge effective length CZC Connection size code
LF Functional length DBC Diameter bolt circle
LH Head length DC Cutting diameter
LPR Protruding length DCB Connection bore diameter
LTA LTA length (length from MCS to CRP) DCON Connection diameter
LU Usable length DCONMS Connection diameter machine side
LUX Usable length maximum DCONWS Connection diameter workpiece side
MTP Clamping type code DF Flange diameter
OAL Overall length DMM Shank diameter
PSIR Tool lead angle FLGT Flange thickness
RE Corner radius HF Functional height
RMPX Ramping angle maximum KWL Keyway length
RPMX Rotational speed maximum KWW Keyway width
TQ Torque LB Body length
WT Weight of item LF Functional length
ZEFF Face effective cutting edge count LPR Protruding length
ZEFP Peripheral effective cutting edge count LS Shank length
LSCX Clamping length maximum
LU Usable length
MHA Mounting hole angle
MHD Mounting hole distance
MHH Mounting hole height
OAL Overall length
WF Functional width
11
NEW PRODUCTS
>>>62
ISO Insert Series for Steel Turning
NEW
MC6015 FP/LP
MC6025
MC6035 MP/RP
NEW
stress stress
20 NEW MC6035
30
MC6035
40
Steel
MC6035
>>>64
ISO Turning Inserts for Difficult to Cut Materials
MP9005 LS
MP9015
NEW
MT9005 MS
MT9015 RS
The new high Al-rich (Al,Ti)N single
layer coating significantly reduces
edge fracturing.
NEW
Positive inserts
Carbide Grade (Non Coated)
Cemented
ISO PVD Carbide
S S01
MP9005
MT9005
MP9015
S10
12
NEW PRODUCTS
PVD Coated Cemented Carbide Grade for Carbon Steel
MS6015
Skilled at pure iron, carbon steel and
free cutting steel turning and achieving
implemented stable finished surfaces and
excellent dimensional accuracy.
A fine compatible collaboration of a special
carbide substrate and a new PVD coating that
greatly improves wear resistance.
Ti-C-N Multilayer Coating
MS6015 Conventional
T.R.S
(GPa) 2.0 2.0
>>>200
Coated CBN-Series for Hardened Steel Turning
BC8100 Series
New Generation Coated CBN
Grades
Wear and fracture resistance greatly
improved for a wide range of continuous
and interrupted applications.
BC8105
Highest Accuracy
13
NEW PRODUCTS
>>>1364
Low Cutting Resistance, Double Sided Insert Face Mill for General Machining
WSX445 Series
Unique geometry minimizes
chatter and vibration!
NEW
Cermet Grade
MX3030
Excellent welding and fracture resistance
provides a coated finish.
<Cutting Conditions>
Work Material: ASTM A36M
Cutter Dia. : ø125mm
Cutting Speed : 200 m/min
Feed per Tooth : 0.1 mm/t.
Depth of Cut : ap= 2.0 mm
ae = 100 mm
Cutting Edge Cutting Mode : Dry Cutting
Center Cut
Double sided Z Geometry After 8m Cutting Work
8 Inserts
Conventional MX3030
>>>1382
General Purpose Multi Corner Insert Type Face Milling Cutter
AHX Series
Heptagonal double sided insert.
Economical 14 cutting edge
inserts.
Unique 14 Cornered Insert
40°
75°
NEW NEW
APMX=3.0 mm APMX=1.6 mm
AHX440S AHX475S
AHX440S AHX475S General Cutting For High Feed Machining
14
NEW PRODUCTS
>>>1412
High Feed Finish Milling Cutter
FMAX
Feed Maximum (FMAX)
milling cutter for ultra efficient
and accurate finishing.
Internal coolant and a special chip breaker wall (Body
protector) provides ideal chip discharge performance.
Aluminum Alloy
(Applies to more of the cutter body
DC ø80mm.)
Standard Through
Coolant Arbor
>>>1436
Exchangeable Inserts Side Cutter
VAS400/500
Non-chattering Side Cutter
Vertical blade double-sided insert VAS400
VFR2SB/VFR2SBF
Revolutionary Hardened Steel
New coating provides amazingly long life
VFR2SB
2 Flute Ball Nose End Mill
s HighOxidation
Temperature
s HighLubricity
Strong S Curve (Al,Cr,Si)N
Ultra Micro-grain
Cemented Carbide
VFR2SBF
2 Flute Ball Nose End Mill for Mirror Finish Cutting
>>>993
Carbide End Mills
MSplus Series
Tough applications require ''Plus''
performance.
NEW MPXLRB MPJHV
Suitable for high precision and high efficient Suitable for high precision and high efficient
machining of die & mold. machining of die & mold.
MPMHVRB MPMHV
A high-efficiency 4-flute radius end mill with Improved Geometry
irregular helix flutes and a wide range of
application.
16
NEW PRODUCTS
>>>690
Exchangeable Head End Mills
>>>1216
Ceramic End Mills
17
NEW PRODUCTS
>>>1768
Solid Carbide Flat Bottom Drills
MFE Series
Shorter processes for many types of machining
High Efficiency Drilling in Various Types of Machining
Excellent Chip Control
Combination of different radius sizes provides
Small R
strong cutting edge and excellent chip control.
Big R
>>>1647
Solid Carbide Drills
MVE/MVS Series
New Generation Solid Carbide Drills
With New TRI-cooling Technology
New Type Thinning
Double Margin
18
NEW PRODUCTS
>>>1909
Indexable Drill
MVX Series
High rigidity body produced Lengths
L/D=2 ‒6
by utilising the latest Now Available
technology
Key Technology that Enabled L/D=6 Machining
NEW NEW
Insert with Reinforced Edge Insert for Aluminum
UH Breaker UN Breaker
>>>1774
CFRP DRILL
MC Drill Series
MCC
CFRP
MCA MCT
CFRP/Al Stack CFRP/Ti Stack
Materials Materials
MCW
For CFRP/CFRTP,
CFRP/Al Stack
Materials and High
Precision Holes
MCAH MCW
CFRP/Al Stack CFRP/Ti Stack
Materials and Materials and High
Hand Tools Precision Holes
MCCH
Hand Tool
(CFRP)
19
AUTOMOTIVE
http://www.carbide.mht.co.th/solution/industry/automotive
ENGINE
Cylinder Block
4
1 FMAX 2 AHX640W
Face Milling Cutter for High Face Milling Cutter for High Effi 2
Efficiency Finish Cutting of ciency Machining of Cast Irons
Nonferrous Metals 1
Cylinder Head
3
1 FMAX 2 MAE / MAS 1
Face Milling Cutter for High Carbide Solid Drill for High
Efficiency Finish Cutting of Efficiency Machining of Aluminum
Nonferrous Metals and Cast Irons
3 HVF 4 Cam Holes Reamer
Hydro Clamp Valve Finisher High Precision Drilling Reamer 4
2
with Guide Pad
Connecting Rod
1 MVX 2 MVS
High Rigidity Exchangeable Long Drill 2
Cutting Edge Drill Carbide Solid Drill
for Deep Drilling
3 MC5005 / MC5015 6
4 iMX
Insert Series for Machining
Exchangeable Head End Mills
Ordinary Cast Irons and Ductile
Cast Irons
5 MFE 6 MVS
Solid Carbide Flat Bottom Drills
Long Drill 1
Carbide Solid Drill 6
for Deep Drilling 3
AXLE / BRAKE
Steering Knuckle / Hub 1
2
4 MHE
3 MC6015 / MC6025
Carbide Solid Drill for Hub
ISO Insert Series
for Steel Turning
4
20
TRANSMISSION
Transmission Case / Valve Body
1 AXD 2 FMAX
2
Face Milling Cutter for High Face Milling Cutter for High
Efficiency Finish Cutting of Efficiency Finish Cutting of
Aluminum Alloys Nonferrous Metals
1
4 3 MAS 4 Straight Flute Drill
2 Solid Carbide Drill for High-Efficiency Carbide Solid Drill for Precision
Machining of Aluminum Alloys Machining of Core Holes
TURBO CHARGER
Waste Gate Valve 1 MP90 Series 2 DOUBLE CLAMP
ISO Turning Inserts HOLDER
for Difficult-to-cut Materials One Action High Rigidity General
Purpose Tool Bit
Bearing Housing
1 MC5005 / MC5015 2 MQS
Insert Series for Machining Ordinary Solid Carbide Drill for Steel and
1
Cast Irons and Ductile Cast Irons Cast Iron
3 APX3000/APX4000
3 Multifunctional Indexable End Mill
2
Turbine Housing
1 MP91 Series 2 ASX445 / WSX445
Insert for Titanium Alloys and Face Milling Cutter for High
3 Heat Resistant Alloys Efficiency Machining of Level
Parts
3 MVS
Carbide Solid Drill with Oil Hole
2
1
Compressor Impeller
2 1 C4LATB 2 AZ Breaker
Taper Ball End Mill for Aluminum Breakers for Aluminum Alloy
Impellers Turning
1
21
AEROSPACE
http://www.carbide.mht.co.th/solution/industry/aerospace
AIR FRAME
1
1 MCC 1 MCCH 1 MCAH
Drill for CFRP machining Hand Tool CFRP/Al Stack Materials
(Standalone CFRP) and Hand Tools
1
1 DFC4JC 1 DFC6JC 1 DFCJRT
4-Flute End Mill for 6-Flute End Mill for End Mill for CFRP
CFRP Finishing CFRP Finishing Rough Machining
1 1
1 VFX 1 iMX
For Titanium Alloy Exchangeable Head
Milling End Mills
1 Coolstar 1 ARP
Multi-coolant Hole End Mill Round insert cutter for
diffi cult-to-cut materials 1
22
ENGINE
1 HSK-T 1 LS/MS/RS 2 GY
1 For Turning Mills MP9005/MP9015 Grooving System
ISO Turning Inserts
for Difficult-to-cut Materials
1 2
2 CERAMIC Corner
Radius End Mills
Ceramic End Mills
1 1 JT Holder 1 LS/MS/RS
Internal Lubrication MT9015
Bite Holder ISO Turning Inserts
for Difficult-to-cut Materials
1 HSK-T 2 FJ/MS/GJ
For Turning Mills VP05RT/VP10RT
1
Special Breakers for
Difficult-to-cut Materials
LANDING GEAR
1
1 MNS 2 SMART MIRACLE 3 VFX Series
Solid Carbide Drill Vibration Control For Titanium Alloy Milling
2 Ball Nose End Mill
for High Efficiency
3 Machining of Vibration Control End
Aluminium Alloys Mills for Machining
Difficult-to-cut Materials
1 APX 2 iMX
Multi-functional End Mill Series
Indexable Cutter Exchangeable Head
End Mills
1
2
23
MEDICAL
http://www.carbide.mht.co.th/solution/industry/medical
HIP-SYSTEM
1 VQMHVRB 3 MT9015 4 MP2SB
Vibration Control End LS/MS breaker Solid Carbide
Mills for Machining Diffi Insert for Machining of End Mill Series 3
cult-to-Cut Materials Titanium
1 2
KNEE-SYSTEM
2
1 VQ4SVB 2 VQMHVRB
4-Flute Vibration Control Ball Vibration Control End
End Mil Mills for Machining Diffi
cult-to-Cut Materials
BONE PLATES
1 VF2WB
2-Flute Wide Ball End Mill
SCREWS
1 MVS 2 MPXLRB
Long Drill 2-Flute Long Neck Radius
Carbide Solid Drill End Mill 1
for Deep Drilling
2
24
SPINE
1
1 SMART MIRACLE
End Mill Series
Vibration Control End
Mills for Machining
Difficult-to-cut Materials
INSTRUMENT
2 1 AJX 2 MVS
High Feed Radius Long Drill
1
Milling Cutter Carbide Solid Drill
for Deep Drilling
MP9120/MP9130/VP15TF
SMALL PARTS
COLLAR/SLEEVE for TURBO CHARGER
1 MMS 2 MP90 Series
Solid Carbide Drill for ISO Turning Inserts
Stainless Steel for Difficult-to-cut Materials
4
1 4 GY Series
3 MICRO-MINI TWIN
Grooving Tool Bit for
3 Tool for Ultra-small Bore Automatic Lathes
2 Turning
4
3 BTAT 4 MMT Series
25
SAFETY OF CUTTING TOOL PRODUCTS
y 1. Use of Cutting Tool Products
Packages of Mitsubishi products carry a safety warning label. However, tools are not labeled with detailed warning
indications. Please read the "Safety of Cutting Tool Products" in this catalogue before handling cutting tool
products and cemented carbide materials. Moreover, as a part of your workers' safety education, please notify
the contents of the "Safety of Cutting Tool Products" to all workers.
y 2. Basic Characteristics of Hard Tool Materials
a In Terms of "Safety of Cutting Tool Products"
Hard Tool Materials : General term for tool materials like cemented carbide alloy, cermet, ceramics,
sintered CBN, sintered diamond, high speed steel and alloy steel, etc.
a Physical Characteristics
Appearance : Varies depending on the type of material. Eg. grey, black, gold, etc.
Smell : None
Hardness, Specific Gravity :
Hard Tool Materials Hardness (HV) Specific Gravity Hard Tool Materials Hardness (HV) Specific Gravity
High Speed Steel (HSS) 200 ─ 1200kg/mm 2
7─9 Sintered CBN 2000 ─ 5000kg/mm 2
3─5
Cemented Carbide 500 ─ 3000kg/mm2 9 ─ 16 Sintered Diamond 8000 ─ 12000kg/mm2 3─5
Cermet 500 ─ 3000kg/mm 2
5─9 Alloy Steel 200 ─ 1200kg/mm 2
7─9
Ceramics 1000 ─ 4000kg/mm2 2─7 Diamond Electroforming Product 8000 ─ 12000kg/mm2 3─5
a Constituents
Carbide, nitride, carbon nitride, oxide, such as W, Ti, Al, Si, Ta, B, V and metals such as Fe, Co, Ni, Cr, Mo.
uCutting tool products generate dust and mist during grinding operations or heating. This dust and mist can be harmful when
coming in contact with the eyes or skin, or if substantial quantities are swallowed. When grinding and machining, it is
recommended to use local exhaust ventilation and respirators, a dust protective mask, glasses, gloves etc. If dust makes
contact with the hands, thoroughly wash the affected area with soap and water. Don't eat in the exposed area, and wash
hands thoroughly before eating. Remove dust from the clothing by a cleaning or washing, but don't shake off.
uCobalt and nickel contained in carbide or other cutting tool materials are reported as possibly carcinogenic to humans. It is
also reported that cobalt and nickel dust and mist can affect the skin, respiratory organs and heart through repeated or
prolonged contact.
26
SUGGESTIONS ON HOW TO USE CUTTING TOOLS
Products Hazard Countermeasure
All Cutting Tools eCutting tools have sharp cutting edges. Handling them
with bare hands may cause injuries. *Twhen
ake precautions such as wearing gloves especially
handling tools and during installation.
eIn cutting, sparks, hot chips and heat generation caused *Apossibility
void using cutting tools in places where there is a
of igniting a fire.
by tool breakage provides a risk of igniting a fire.
*have a fire prevention countermeasure.
In case of using non-water soluble oil, make sure to
Brazed Tools eWeakening of the braze and breakage of inserts may *BD efore using them, ensure they are brazed securely.
cause injury. *high temperature.
o not use them under conditions which produce very
Others eMachine and tools may be damaged if they are used for
purposes other than the prescribed application. *Use them strictly for the prescribed application.
INFORMATION
This catalogue completes the basic precautions for safety use of our company's products.
For further information, please refer to the guideline, catalogs or contact us. We are not responsible for any accidents causing by modifying
tools without our permission.
27
28
TURNING TOOLS
INSERT STANDARDS
INSERT GRADES
IDENTIFICATION ........................................30 TN** .......................................... 136
HOLE GEOMETRY .....................................32 POSITIVE INSERTS WITH HOLE... 138
PRECISION BREAKER SYSTEM.................34 CC** .......................................... 138
TOOL NAVI .................................................37 CP** .......................................... 144
OPTIMUM GRADES AND CHIP BREAKERS DC** .......................................... 145
FOR EXTERNAL TURNING...................38 DE** .......................................... 150
PRECISION BREAKER SYSTEM.................54 RC** .......................................... 151
WIPER INSERT ..........................................56 SC** .......................................... 152
GRADES FOR TURNING.............................58 SP** .......................................... 154
TURNING APPLICATION RANGE ................59 TC** .......................................... 155
COATED CARBIDE(CVD) ............................62 TE** .......................................... 157
COATED CARBIDE(PVD) ............................64 TP** .......................................... 158
CERMET ....................................................65 VB** .......................................... 160
COATED CERMET ......................................66 VC** .......................................... 162
CEMENTED CARBIDE ................................67 VD** .......................................... 164
MICRO-GRAIN CEMENTED CARBIDE VP** .......................................... 165
(SOLID TOOLS) ...................................68 WB** ......................................... 166
CLASSIFICATION .......................................70 WC** ......................................... 167
NEGATIVE INSERTS WITH HOLE ............. 102 WP** ......................................... 168
CN**...................................................... 102 XC** .......................................... 169
DN**...................................................... 108 POSITIVE INSERTS WITHOUT
RN**...................................................... 114 HOLE ..................................... 170
SN** ...................................................... 115 RTG .......................................... 170
TN** ...................................................... 121 SP** .......................................... 171
VN** ...................................................... 128 TC** .......................................... 172
WN** ..................................................... 130 TP** .......................................... 173
NEGATIVE INSERTS WITHOUT HOLE ...... 134 RECOMMENDED CUTTING
CN**...................................................... 134 CONDITIONS (EXTERNAL
SN** ...................................................... 135 TURNING).............................. 175
29
TURNING INSERT
IDENTIFICATION
TURNING INSERT
M
M
Symbol Insert Shape
S Triangular insert with a facet
H Hexagonal IC
(Secondary Cutting Edge)
IC
O Octagonal
c Tolerance Class
P Pentagonal
Tolerance of Tolerance of Tolerance of Detail of M Class Insert Tolerance
S Square Symbol Nose Height Inscribed Circle Thickness aTolerance of Nose Height M (mm)
M (mm) IC (mm) S (mm)
T Triangular D.I.C. Triangular Square Rhombic
80°
Rhombic Rhombic Round
55° 35°
A e0.005 e0.025 e0.025
C Rhombic 80° 6.35 e0.08 e0.08 e0.08 e0.11 e0.16 ─
F e0.005 e0.013 e0.025
9.525 e0.08 e0.08 e0.08 e0.11 e0.16 ─
D Rhombic 55° C e0.013 e0.025 e0.025
12.70 e0.13 e0.13 e0.13 e0.15 ─ ─
E Rhombic 75° H e0.013 e0.013 e0.025
15.875 e0.15 e0.15 e0.15 e0.18 ─ ─
E e0.025 e0.025 e0.025
F Rhombic 50° 19.05 e0.15 e0.15 e0.15 e0.18 ─ ─
G e0.025 e0.025 e0.13
M Rhombic 86° 25.40 ─ e0.18 ─ ─ ─ ─
J e0.005 e0.05 ─ e0.15 e0.025
31.75 ─ e0.20 ─ ─ ─ ─
V Rhombic 35° K* e0.013 e0.05 ─ e0.15 e0.025
aTolerance of Inscribed Circle IC (mm)
W Trigon L* e0.025 e0.05 ─ e0.15 e0.025
D.I.C. Triangular Square Rhombic Rhombic Rhombic Round
L Rectangular
M* e0.08 ─ e0.18 e0.05 ─ e0.15 e0.13 80° 55° 35°
N* e0.08 ─ e0.18 e0.05 ─ e0.15 e0.025 6.35 e0.05 e0.05 e0.05 e0.05 e0.05 ─
A Parallelogram 85° U* e0.13 ─ e0.38 e0.08 ─ e0.25 e0.13 9.525 e0.05 e0.05 e0.05 e0.05 e0.05 e0.05
12.70 e0.08 e0.08 e0.08 e0.08 ─ e0.08
B
K
Parallelogram 82°
Parallelogram 55°
The surface of insert with
* mark is sintered. 15.875 e0.10 e0.10 e0.10 e0.10 ─ e0.10
19.05 e0.10 e0.10 e0.10 e0.10 ─ e0.10
R Round
25.40 ─ e0.13 ─ ─ ─ e0.13
X Special Design
31.75 ─ e0.15 ─ ─ ─ e0.15
z c
C N M G x v
Without Single
F 25° B With Hole Cylindrical Hole No R ─
Hole Sided
+
One Countersink One Without Double
G 30° H With Hole (70 ─90°) Sided
F Hole
─
Sided
30
TURNING INSERT
TURNING INSERT
Symbol Diameter of
Inscribed Circle
(mm)
02
L3 08
04
05
03
04
03
04
06
08
3.97
4.76
*Thickness is from the bottom of the insert
to the top of the cutting edge.
Symbol Thickness (mm)
03 09 06 05 05 09 5.56
06 6.00 S1 1.39
04 11 07 06 06 11 6.35 01 1.59
05 13 09 08 07 13 7.94 T0 1.79
08 8.00 02 2.38
09 06 16 11 09 09 16 9.525 T2 2.78
10 10.00 03 3.18
12 12.00
T3 3.97
12 08 22 15 12 12 22 12.70
04 4.76
15 10 19 16 15 27 15.875
06 6.35
16 16.00
19 13 23 19 19 33 19.05 07 7.94
20 20.00 09 9.52
27 22 22 38 22.225 n Insert Thickness
25 25.00
25 31 25 25 44 25.40
31 38 32 31 54 31.75
32 32.00
b Insert Size / Chip Breaker
LP MP RP
b n /
12 04 08 (E) (N) - MP m , .
LM MM RM
LK MK RK
m Insert Corner Configuration , Cutting Edge Condition . Cutting Direction
Symbol Corner Radius (mm) Figure Cutting Edge Symbol Figure Hand Symbol
00 Sharp Nose
Sharp
F Right R LS MS RS
V3 0.03 Cutting Edges
V5 0.05
01 0.1 Round Left L
E
Cutting Edges
02 0.2
FP LP MP
04 0.4
Chamfered Neutral N
08 0.8 T
Cutting Edges
12 1.2
16 1.6 Chamfered
and Rounded S MA SW MW
20 2.0
Cutting Edges
24 2.4
28 2.8 Mitsubishi Materials omit
the honing symbol.
32 3.2 HZ HX HV
00 : Inch
Round Insert
M0 : Metric
(Refer to JIS-B4120-1998)
31
TURNING INSERT
HOLE GEOMETRY
TURNING INSERT
FHCSA
FHCSD
FHCSA
FHCSD
FHCSD
D1
D1
D1
D1
NEGATIVE POSITIVE
Dimensions (mm) Dimensions (mm)
Insert Number Hole Type Insert Number Hole Type
FHCSA
D1 D1 FHCSD (°)
0903pp 3.81 A 0602pp 2.8 3.8 R B
CNGA CCET
0904pp 3.81 A 09T3pp 4.4 6.0 R B
CNGG
CNMA 1204pp 5.16 A 0602pp 2.8 3.9 R B
CCGB
CNMG 1606pp 6.35 A CCMB
CNMM 1906pp 7.93 A CCGH
CNMP CCMH
2509pp 9.12 A
1104pp 3.81 A 03S1pp 2.0 2.9 R B
DNGA
1504pp 5.16 A 04T0pp 2.4 3.5 R B
DNGG
DNGM 1506pp 5.16 A CCGT 0602pp 2.8 3.8 R B
DNMA 09T3pp 4.4 6.0 R B
DNMG 1204pp 5.5 7.5 R B
DNMM
0602pp 2.8 3.8 R B
DNMX
0803pp 3.4 4.5 R B
CCMT
0903pp 3.81 A 09T3pp 4.4 6.0 R B
SNGA 1204pp 5.16 A 1204pp 5.5 7.5 R B
SNGG 1506pp 6.35 A 03S1pp 2.0 2.9 R B
SNMA
1906pp 7.93 A 04T0pp 2.4 3.5 R B
SNMG CCGW
SNMM 2507pp 9.12 A 0602pp 2.8 3.8 R B
CCMW
2509pp 9.12 A 09T3pp 4.4 6.0 R B
1103pp 2.26 A 1204pp 5.5 7.5 R B
TNGA
1603pp 3.81 A 0802pp 3.4 4.5 R B
TNGG CPGT
TNMA 1604pp 3.81 A 0903pp 4.4 6.0 R B
TNMG 2204pp 5.16 A CPGB 0802pp 3.5 5.3 78° D
TNMM 2706pp 6.35 A CPMB 0903pp 4.5 6.3 78° D
TNMX CPMH
3309pp 7.93 A
1604pp 3.81 A 0802pp 3.5 5.6 78° D
VNGA CPMX
VNGM 0903pp 4.6 6.6 80° D
VNGG DCET 0702pp 2.8 3.8 R B
VNMG DCGT 11T3pp 4.4 6.0 R B
VNMM
DCGW 0702pp 2.8 3.8 R B
0603pp 3.81 A DCMW 11T3pp 4.4 6.0 R B
WNMA 06T3pp 3.81 A DCMT 1504pp 5.5 7.5 R B
WNMG 0604pp 3.81 A DEGX 1504pp 5.1 7.0 85° C
0804pp 5.16 A 1003M0 3.6 4.6 21° D
090300 3.81 A 1204M0 4.2 5.4 21° D
120400 5.16 A 1606M0 5.2 6.7 21° D
RCMX
RNMG 150600 6.35 A 2006M0 6.5 8.0 21° D
RNMA 190600 7.93 A 2507M0 7.2 9.1 21° D
250900 9.12 A 3209M0 9.5 11.7 21° D
310900 12.7 A
32
TURNING INSERT
TURNING INSERT
Type A Type B Type C Type D
FHCSA
FHCSD
FHCSA
FHCSD
FHCSD
D1
D1
D1
D1
POSITIVE
Dimensions (mm) Dimensions (mm)
Insert Number Hole Type Insert Number Hole Type
FHCSA FHCSA
D1 FHCSD (°) D1 FHCSD (°)
0602M0 2.8 3.8 R B VBET 1103pp 2.9 3.8 R B
RCGT
0803M0 3.4 4.5 R B VBGT 1604pp 4.4 6.0 R B
RCMT
10T3M0 4.4 6.0 R B VBMT
09T3pp 4.4 6.0 R B
VBGW
SCMT
SCMW 1204pp 5.5 7.5 R B 0802pp 2.4 3.2 R B
0903pp 4.6 6.0 R B VCGT 1103pp 2.8 3.8 R B
SPMW VCMT
1203pp 5.7 7.5 R B 1303pp 3.4 4.5 R B
VCGW
0903pp 4.4 6.0 R B VCMW 1604pp 4.4 6.0 R B
SPMT
1203pp 5.5 7.5 R B 2205pp 7.5 5.5 R B
0903pp 4.8 6.4 58° D VDGX 1603pp 4.5 6.1 88° D
SPGX
1203pp 5.9 7.7 58° D WBGT 0201pp 2.3 3.2 R B
0601pp 2.3 3.2 R B WBMT L302pp 2.3 3.2 R B
0802pp 2.3 3.0 R B 0201pp 2.3 3.0 R B
TCGT WCGT
TCMT 0902pp 2.5 3.3 R B WCMT L302pp 2.3 3.0 R B
TCGW 1102pp 2.8 3.8 R B WCGW 0402pp 2.8 3.8 R B
TCMW 1303pp 3.4 4.5 R B WCMW 06T3pp 4.4 6.0 R B
16T3pp 4.4 6.0 R B WPGT 0402pp 2.8 3.8 R B
TEGX 1603pp 4.4 6.1 88° D WPMT 0603pp 4.4 6.0 R B
0802pp 2.5 3.8 88° C XCMT 1503pp 2.8 3.8 R B
0902pp 3.0 4.3 88° C
TPGX
1103pp 3.5 4.8 88° C
1603pp 4.8 6.5 58° D
0802pp 2.7 3.8 88° C
0902pp 3.2 4.3 88° C
TPMX
1103pp 3.7 4.8 88° C
1603pp 4.8 6.4 58° D
33
TURNING INSERT
LE
Right hand insert shown.
TNGG 110302R/L 1.3 3.2 15
TNGG 110304R/L 1.3 3.0 15
TNGG 110308R/L 1.3 2.7 15
LBB TNGG 160304R/L 2.3 5.4 15
GAN
34
TURNING INSERT
TURNING INSERT
a POSITIVE INSERTS Unit : mm
B
LB
CCET 060202R/L-SR 2.2 ─
LBB 15°
CCET 060204R/L-SR 2.2 ─
B
20°
LB
30°
CCET 09T3V3R/L-SR 3.2 ─ Right hand insert shown.
20°
CCET 09T301R/L-SR 3.2 ─ DCET 0702V3R/L-SR 2.5 ─
CCET 09T302R/L-SR 3.2 ─ DCET 070201R/L-SR 2.5 ─
Right hand insert shown. CCET 09T304R/L-SR 3.2 ─ DCET 070202R/L-SR 2.5 ─
LBB
CCET 060200R/L-SN 1.0 ─ DCET 070204R/L-SR 2.5 ─
B
LB
CCET 0602V3R/L-SN 1.0 ─ 30°
DCET 11T3V3R/L-SR 3.7 ─
20°
CCET 060201R/L-SN 1.0 ─ DCET 11T301R/L-SR 3.7 ─
CCET 060202R/L-SN 1.0 ─ DCET 11T302R/L-SR 3.7 ─
LBB
CCET 060204R/L-SN 1.0 ─ Right hand insert shown. DCET 11T304R/L-SR 3.7 ─
20°
CCET 09T300R/L-SN 1.5 ─ DCET 070200R/L-SN 1.0 ─
CCET 09T3V3R/L-SN 1.5 ─ DCET 0702V3R/L-SN 1.0 ─
CCET 09T301R/L-SN 1.5 ─ DCET 070201R/L-SN 1.0 ─
CCET 09T302R/L-SN 1.5 ─ DCET 070202R/L-SN 1.0 ─
LBB
Right hand insert shown. CCET 09T304R/L-SN 1.5 ─ DCET 070204R/L-SN 1.0 ─
CCET 0602V3R/LW-SN 1.0 ─ 20°
DCET 11T300R/L-SN 1.5 ─
LBB CCET 09T3V3R/LW-SN 1.5 ─ DCET 11T3V3R/L-SN 1.5 ─
DCET 11T301R/L-SN 1.5 ─
20° DCET 11T302R/L-SN 1.5 ─
Right hand insert shown. Right hand insert shown. DCET 11T304R/L-SN 1.5 ─
CCGH 060202R/L-F 1.2 ─ DCET 0702V3R/LW-SN 1.0 ─
LBB CCGH 060204R/L-F 1.4 ─ LBB DCET 11T3V3R/LW-SN 1.5 ─
B
LB
35
TURNING INSERT TURNING INSERT
B
B
LB
VBGT 160402R/L-F 1.5 ─
LB
B
VBET 110302R/L-SR
LB
2.5 ─
15° 30° 20° VBET 110304R/L-SR 2.5 ─
LE
Right hand insert shown. Right hand insert shown.
TCGT 0601V3L-F 1.0 ─ VBET 110300R/L-SN 1.0 ─
LBB TCGT 060101L-F 1.0 ─ LBB VBET 1103V3R/L-SN 1.0 ─
B
LB
LE 20° 20°
Right hand insert shown. Right hand insert shown.
TPGH 080202R/L-FS 0.9 ─ VCGT 080202R/L-F 0.8 ─
TPGH 080204R/L-FS 0.9 ─ LBB VCGT 080204R/L-F 0.8 ─
B
TPGH 090202R/L-FS 1.0 ─ LB
LBB
TPGH 090204R/L-FS 1.0 ─ 13°
B
20°
LB
TPGX 090208R/L 1.4 ─ Right hand insert shown. WBGT L30204R/L-F 1.0 ─
10° 20°
TPGX 110302L 1.8 ─ WCGT 020102R/L 1.0 ─
TPGX 110304R/L 1.8 ─ LBB WCGT 020104R/L 1.0 ─
B
1.0 ─
15° 30° WCGT L30204L 1.0 ─
Right hand insert shown.
WPGT 040204R/L-FS 1.0 ─
LBB WPGT 060304R/L-FS 1.0 ─
B
LB
15° 20°
Right hand insert shown.
36
TURNING INSERT
TOOL NAVI
TURNING INSERT
y OUTLINE
supports our customers with information and suitable cutting conditions for each work material by selecting an optimal
indexable insert together with the optional tool.
y LABEL INDICATION
z Work materials
MC6025
CNMG432MP
CNMG120408-MP
CNMG120408-MP MC6025
QU691NZ1AM3B9 P : Steel (Material reference : Carbon steel, alloy steel 180HB)
CNMG432MP
M : Stainless steel (Material reference : Austenitic stainless steel 180HB)
z MADE IN JAPAN
K : Cast iron (Material reference : Gray cast iron, ductile cast iron 180HB)
vc 310 - 190 m/min
1015 - 625 SFM x N : Aluminium alloy, non-ferrous metal
f 0.16 - 0.50 mm/rev
0.006 - 0.020 IPR c
S : Material reference : Titanium alloy 320HB, Ni, Co-Based Alloy 400HB
*12 The above is an example. There may be inserts recommended for multiple work materials.
H : Hardened steel 60HRC
* Please contact us for recommended cutting conditions using
coefficient values other than the above.
* 3. N :Life based on each grade. For stable choose the performance cutting speed and for unstable choose the tool life feed rate.
* 4. The tool life is based on the following (VB wear). Some materials include elements other than this.
PMKS ··· VB=0.3mm
H ··· VB=0.1mm
y TOOL LIFE
Cutting speed has a large affect on tool life. is based on Taylor's equation (relationship vc Tn=C between tool grade, cutting conditions,
and tool life). Therefore, performance speed and tool life is found for each work material. When the customer requires a different tool life, obtain
coefficient values of the grade you use from the charts below. Multiply the coefficient values by the cutting speed to calculate a new cutting speed.
a P Grade (Steel) cutting speed coefficient values. a K Grade (Cast lron) cutting speed coefficient values.
Tool life 15min 30min 45min 60min 90min Tool life 15min 30min 45min 60min 90min
Grade Grade
UE6105 1.00 0.79 0.69 0.63 0.55 MC5005 1.00 0.83 0.75 0.70 0.63
MC6015 1.00 0.82 0.72 0.67 0.59 MC5015 1.00 0.83 0.75 0.69 0.62
MC6025 1.00 0.83 0.75 0.69 0.62 (ex.) Medium cutting of steel
MC6035 1.00 0.88 0.82 0.78 0.73 The 1st recommendation : MC6025
Indexable inserts : CNMG120408-MP
MP3025 1.00 0.85 0.77 0.72 0.65 Recommended cutting speed : vc=310m/min
(Tool life : 15min.)
NX2525 1.00 0.87 0.80 0.76 0.70
a M Grade (Stainless Steel) cutting speed coefficient values. Tool life required by the customer : 30min.
Tool life 15min 30min 45min 60min 90min
Grade
310×0.83i257m/min
MC7015 1.00 0.83 0.75 0.70 0.63
MC7025 1.00 0.90 0.84 0.80 0.75
MP7035 1.00 0.84 0.76 0.71 0.62
aUS735 1.00 0.78 0.68 0.61 0.53
37
TURNING INSERT
F
Continuous Cutting
L
Securely Clamped Component Cutting
Light Cutting
General Cutting
H Heavy Cutting
FY
VP25N
SY
VP25N
P Mild Steel
FY
MP3025
SY
MP3025
8
7
Depth of Cut (mm)
6
5 FY
4
3
FY SY
SY
2
1
UE6020 UE6020 0 0.1 0.3 0.5 0.7
Feed (mm/rev)
Stable Cutting
F FY VP25N 285 ─ 445 0.09 ─ 0.23 0.20 ─ 0.80
L SY VP25N 260 ─ 405 0.16 ─ 0.33 0.50 ─ 1.20
General Cutting
F FY MP3025 275 ─ 420 0.09 ─ 0.23 0.20 ─ 0.80
L SY MP3025 250 ─ 385 0.16 ─ 0.33 0.50 ─ 1.20
Unstable Cutting
F FY UE6020 285 ─ 460 0.09 ─ 0.23 0.20 ─ 0.80
L SY UE6020 260 ─ 420 0.16 ─ 0.33 0.50 ─ 1.20
38
TURNING INSERT
TURNING INSERT
P Carbon Steel · Alloy Steel (180─280HB)
8
Stable Cutting F Finish Cutting
L
7 HX
Depth of Cut (mm)
RP
Unstable Cutting M Medium Cutting
R
2
1 MP Rough Cutting
0 0.1 0.3 0.5 0.7
H
Feed (mm/rev)
Heavy Cutting
Finish Cutting Light Cutting Medium Cutting Rough Cutting Heavy Cutting
FP
NX2525
LP
UE6105
MP
UE6105
RP
UE6105
HX
UE6110
FP
MP3025
LP
MC6015
MP
MC6015
RP
MC6015
HX
MC6025
FP
MC6025
LP
MC6025
MP
MC6025
RP
MC6025
HX
UH6400
39
TURNING INSERT TURNING INSERT
LM
MC7015
MM
MC7015
RM
MC7015
LM
MC7025
MM
MC7025
RM
MC7025
8
7 MM
LM
MP7035
MM
MP7035
RM
MP7035
2
1
0
LM
0.1 0.3 0.5 0.7
Feed (mm/rev)
40
TURNING INSERT
TURNING INSERT
K
8
Cast Iron (< 350MPa)
Stable Cutting L Light Cutting
M
7 RK Flat Top
Depth of Cut (mm)
H
2
1 MK Heavy Cutting
0 0.1 0.3 0.5 0.7
Feed (mm/rev)
LK MK RK Flat Top
MC5005 MC5005 MC5005 MC5005
LK MK RK Flat Top
MC5015 MC5015 MC5015 MC5015
LK MK RK Flat Top
MC5015 MC5015 MC5015 MC5015
41
TURNING INSERT TURNING INSERT
R Rough Cutting
FJ
RT9010
LS
MT9015
MS
MT9015
RS
MT9015
FJ
RT9010
LS
MT9015
MS
MT9015
RS
MT9015
FJ
RT9010
MJ
RT9010
MS
RT9010
GJ
RT9010
42
TURNING INSERT
TURNING INSERT
Stable Cutting F Finish Cutting
R Rough Cutting
FJ
VP10RT
LS
MP9005
MS
MP9005
RS
MP9015
FJ
VP10RT
LS
MP9015
MS
MP9015
RS
MP9015
FJ
VP15TF
MJ
VP15TF
MS
VP15TF
GJ
VP15TF
43
TURNING INSERT TURNING INSERT
General Cutting
FP
NX2525
LP
NX2525
MP
NX2525 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
FP
MC6015
LP
MC6015
MP
MC6015
FP
MC6025
LP
MC6025
MP
MC6025
P Mild Steel
4
44
TURNING INSERT
TURNING INSERT
Finish Cutting Light Cutting Medium Cutting
Stable Cutting
General Cutting
FP
NX2525
LP
NX2525
MP
NX2525 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
FP
MC6015
LP
MC6015
MP
MC6015
FP
MC6025
LP
MC6025
MP
MC6025
45
TURNING INSERT TURNING INSERT
General Cutting
FM
VP15TF
LM
MC7025
MM
MC7025 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
FM
VP15TF
LM
MC7025
MM
MC7025
FM
VP15TF
LM
MP7035
MM
MP7035
46
TURNING INSERT
TURNING INSERT
Finish Cutting Light Cutting Medium Cutting
Stable Cutting
General Cutting
MK MK Flat Top
MC5005 MC5005 MC5005 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
MK MK Flat Top
MC5015 MC5015 MC5015
MK MK Flat Top
MC5015 MC5015 MC5015
47
TURNING INSERT TURNING INSERT
Finish Cutting
Stable Cutting
General Cutting
AZ
HTi10 Unstable Cutting
F Finish Cutting
AZ
HTi10
AZ
HTi10
48
TURNING INSERT
TURNING INSERT
Finish Cutting
Stable Cutting
General Cutting
FJ
RT9010 Unstable Cutting
F Finish Cutting
FJ
RT9010
FJ
RT9010
49
TURNING INSERT TURNING INSERT
General Cutting
FS
MP9005
LS
MP9005 Unstable Cutting
F Finish Cutting
L Light Cutting
FS
MP9015
LS
MP9015
FS
MP9015
LS
MP9015
Stable Cutting
F FS MP9005 25 ─ 95 0.04 ─ 0.12 0.20 ─ 1.40
L LS MP9005 25 ─ 95 0.06 ─ 0.20 0.30 ─ 3.00
General Cutting
F FS MP9015 20 ─ 75 0.04 ─ 0.12 0.20 ─ 1.40
L LS MP9015 20 ─ 75 0.06 ─ 0.20 0.30 ─ 3.00
Unstable Cutting
F FS MP9015 20 ─ 75 0.04 ─ 0.12 0.20 ─ 1.40
L LS MP9015 20 ─ 75 0.06 ─ 0.20 0.30 ─ 3.00
50
TURNING INSERT
TURNING INSERT
Finish Cutting Light Cutting Medium Cutting
Stable Cutting
General Cutting
R-R/L Standard Standard
NX2525 NX2525 NX2525 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
51
TURNING INSERT TURNING INSERT
General Cutting
R-R/L Standard Standard
NX2525 NX2525 NX2525 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
52
TURNING INSERT
TURNING INSERT
Finish Cutting Light Cutting Medium Cutting
Stable Cutting
General Cutting
R-R/L Flat Top Flat Top
NX2525 UC5105 UC5105 Unstable Cutting
F Finish Cutting
L Light Cutting
M Medium Cutting
53
TURNING INSERT
CCGH/CCGT CPGT DCGT TPGH TPGV/TPGT TCGT VBGT/VCGT WBGT WCGT WPGT
Breaker Features Type Type Type Type Type Type Type Type Type Type
a For precision finishing.
a Small width lead breaker for
FS excellent chip control.
a Sharp cutting edge gives a
─ ─ ─ ─ ─ ─ ─ ─
good surface finish.
a For finish cutting.
a Lead breaker controls chip flow.
F
a Sharp cutting edge gives a ─ ─ ─
good surface finish.
a Lead breaker for light cutting.
a Good chip control for low to
R/L
medium feed rates. ─ ─ ─ ─ ─ ─ ─ ─ ─
a For light cutting.
a Good chip control for low to
Standard
medium feed rates. ─ ─ ─ ─ ─ ─ ─ ─
Breaker Features CCET Type CCGT Type DCET Type DCGT Type VBET Type
a The wide lead breaker for medium
cutting is suitable for automatic
SR lathe machining.
a The insert design for low
─ ─
resistance controls chip flow.
a The parallel breaker for light
cutting is suitable for automatic
SS lathe machining.
a Excellent chip control at low
─ ─ ─
feed rates.
a The parallel breaker for general
purpose is suitable for automatic
SN lathe machining.
a Excellent chip control for low to
medium feed rates.
54
TURNING INSERT
TURNING INSERT
ANGULAR AND PARALLEL CHIP BREAKERS (NEGATIVE INSERTS)
y CHIP CONTROL RANGE y FEATURES OF CHIP BREAKER
DNGG SNGG TNGG VNGG
Breaker Features Type Type Type Type
a For precision finishing.
a Small width lead breaker
R/L FS for good chip control. ─ ─ ─
a Sharp cutting edge gives a
Breaker
Depth of Cut (mm)
55
TURNING INSERT
WIPER INSERT
TURNING INSERT
Finished surface
Same surface y A wiper insert + machining at high feed rate
Wiper insert roughness Standard insert • Reduced machining time (per workpieces)
+ + • Increased number of workpieces (per definitive time period)
High feed (The feed rate is doubled.) The conventional feed condition • Improving chip control
30 Insert : CNMG120408-oo
Cutting Speed=200m/min
Rz (μm)
Depth of Cut=1.5mm
Wiper Insert
20 Feed Speed=0.2 – 0.6mm/rev
MW Breaker Wet Outer Diameter Cutting
Special attention is not necessary when using CNMG • WNMG • CCMT types
y No Restriction for Holders End Cutting
y Not Necessary to Adjust
A standard holders can be used. Angle the Machining Programme
*
( A double clamp, high rigidity tool is
recommended.)
75° Conventional machining
programmes can be used.
End Cutting (The CNMG • WNMG • CCMT
Angle types are based
Non 95° The CNMG type can on the Not
ISO/ANSI.) necessary to
restriction be used as a wiper at
the 100°corner. adjust
Special attention is necessary when using the DNMX • TNMX types due to the special top face geometry
y Restriction for Holders y Necessary to Adjust
Use a holder with end cutting angle 93° for improving wiper efficiency. A holder with end the Machining Programme
cutting angle 91° can improve wiper efficiency (see the following figure), however, there is no When machining errors occur, please
wiper efficiency with other end cutting Ex):Theoretical surface roughness of holders adjust the programme.
in using the TNMX160412-MW. (The DNMX•TNMX types are not
angles (60°, 90°, 107°etc.). 40
Theoretical Surface
Roughness Rz (m)
56
TURNING INSERT
TURNING INSERT
Adjustment of machining programmes for DNMX • TNMX types
Basic Process) Adjusting Toward X-axis and Z-axis Adjustment toward Z-axis
Adjusting the differential between a standard insert and Z-axis / X-axis.
Standard insert
Adjustment toward X-axis
Standard insert DNMX,TNMX
type (Not closed to Corner R)
0.01mm
DNMX,TNMX
type
A) Adjusting a Taper
*Necessary to maintain a correct taper.
Adjust the relief angle toward the normal line.
Geometry of
adjusted program
Note) Adjust the angle toward the normal line in the case where the
adjustment number is minus ( ' =60° ─ 70°) and is not machined completely.
of
h
pt t
'°( ─) de r cu
e e
of Th ov
pth
de cut
e
Th ove r The actual machining
geometry '°( +)
Classification
Taper Angle '°
Corner radius
-25 ─ -15 -10 -5 0 5 10 15 20─35 40 45 50 55 60─65 70 75─85 90
1.2 0.04 0.03 0.01 0 0.02 0.03 0.04 0.05 0.04 0.04 0.02 0.01 -0.01 0 0.01 0
0.8 0.03 0.02 0.01 0 0.01 0.02 0.03 0.04 0.03 0.03 0.02 0 -0.01 0 0.01 0
0.4 0.02 0.01 0.01 0 0.01 0.01 0.02 0.02 0.02 0.01 0.01 0 -0.01 -0.01 0 0
The number→+numbers:adjustment of relief angle, -numbers:adjustment of drive-in angle (mm)
B) Adjusting a Corner R
*Necessary to maintain a correct corner radius.
Adjust the work diameter same as the taper to prevent cut-over.
The value of adjustment to work R Ex) : In case of machining R 2.0 when using a corner R 1.2 type insert.
= Work R + the adjustment value Geometry of adjusted
e uses of a wiper insert
ective uses of a wiper insert
*No adjusting the corner radius in this case. programme
R
0.0
R2.14
Corner Radius 0.8 | Work Radius+0.11(mm) = 2.0 + 0.14
Workpiece Workpiece Work radius Adjusted conditions
Corner Radius 1.2 | Work Radius+0.14(mm) radius 2.0 radius 2.0
The actual machining
geometry
Corner Radius Correction Input the correction number of each corner radius.
top face geometry
The value of corrected corner radius Ex):In the case of machining a corner with a radius R 2.0 when using
= approximation an insert with a corner radius R 1.2.
*No adjusting the machining the programme in this case.
The corner radius The value of corrected
of a insert corner radius = approximation
1.
1.
R
R
Others) The value of correction is same for both DNMX and TNMX. Discriminate them by the size of corner radius.
57
TURNING INSERT
S
P
H
N
K
M
Hardened Steel Heat Resistant Alloy • Ti Alloy Non-Ferrous Metal Cast Iron Stainless Steel Steel
58
ISO
S30
S20
S10
S01
K30
K20
K10
K01
P40
P30
P20
P10
P01
H30
H20
H10
H01
N30
N20
N10
N01
M40
M30
M20
M10
M01
US905 MC5005 MC7015 UE6105
MC5015 UE6110
MC7025 MY5015
UC5115
CVD
MC6025
MY5015 US735
UE6020
MC6035
TURNING INSERT
UH6400
VP20RT MP7035
VP45N
MT9005 HTi05T
MT9015 HTi10
Carbide
BC8105/BC8110
BC8120
MBC010
CBN
Coated
BC8130
MBC020
MB8025 MB710
MB730
MB810 MB730
CBN
MB825 MB4020
=
MB835 MBS140
MD205
MD220
PCD
MD230
(Sintered Diamond)
TURNING INSERT
TURNING INSERT
P STEEL M STAINLESS STEEL
0 0.2 0.4 0.6 0.8 0 0.1 0.2 0.3 0.4 0.5 0.6
600
300
Cermet and Coated Cermet Cemented Carbide
AP25N CVD • PVD Coated Carbide
VP25N MC5015 400
200 NX2525
VP10RT
VP15TF
200
100 HTi05T HTi10
Cemented Carbide
HTi10
59
TURNING INSERT TURNING INSERT
a Recommendation of the insert grade based on cutting speed and conditions for each workpiece.
UE6105
300 300
Cutting Speed (m/min)
NX3035
NX2525
100 100
VP15TF
0 0
400 MC5005
Cutting Speed (m/min)
200
MC7015 300
MC7025
MC5015
200
100 MP7035
VP15TF
100 NX2525 VP15TF
0 0
MB4020
MB730
Cutting Speed (m/min)
1000
MB710
500
Cutting Conditions
60
TURNING INSERT
TURNING INSERT
N NON-FERROUS METAL N NON-FERROUS METAL (PCD)
600 1500
Cutting Speed (m/min)
HTi10 MD220
200 500
0 0
75 75
Cutting Speed (m/min)
MP9005
50 MP9015 50
MT9015
VP15TF VP15TF
25 25
0 0
300
Cutting Speed (m/min)
General Cutting
200
BC8110 Low Clamping Rigidity Cutting
BC8105
BC8120
100 BC8130
Cutting Conditions
61
TURNING INSERT
COATED CARBIDE(CVD)
TURNING INSERT
SELECTION STANDARD
a TURNING
UE6105
UE6105 (200 ─ 400)
UE6110
MY5015
MC6015
Continuous P10
Cutting 250
MC6015
UE6020
MC6025
(150 ─ 400)
Steel P20
200
MC6025 (100 ─ 280)
MC6035
P30
UH6400
Interrupted
Cutting 150
MC6035 (80 ─ 200) P40
M
200 M01
MC7015
MC7015
Continuous (160 ─ 250)
Cutting
US7020
M10
150
MC7025
Stainless Steel MC7025 (120 ─ 200) M20
Continuous
and M30
US735
Interrupted 100
Cutting US735 (80 ─ 120) M40
K
MC5005
K01 UC5105
Continuous 300
MY5015
MC5005
MC5015
UC5115
Cutting (200 ─ 400)
K10
Cast Iron
Ductile Cast Iron
K20
Interrupted 250
Cutting
MC5015 (150 ─ 300)
K30
S Continuous
US905
TOUGH-Grip
Prevents delamination of a
y TOUGH-Grip Technology coating
The interface between the Nano-texture TiCN
layers is controlled at the nano
level, allowing the TOUGH Provides superior wear resistance
GRIP layer extremely high and chipping resistance
levels of adhesion to prevent Special carbide substrate
delamination.
Prevents crack development
Stable tool life
62
TURNING INSERT
TURNING INSERT
GRADE CHARACTERISTICS
Substrate Coating Layer
Grade
Hardness (HRA) T.R.S (GPa) Surface Composition Thickness
* 1GPa=102kg/mm
2
Conventional coating
Impact stress when interrupted cutting
The smooth coating surface
provides excellent welding MC6035 has succeeded in
resistance. alleviating tensile stress in
the coating layer therefore,
With the thickened TiCN, MC6035 Tensile cracks that can develop
also achieves superior wear stress by impact stress can be
resistance for increased stability. prevented when interrupted
cutting.
MC6035 MC6025 MC6035
63
TURNING INSERT
COATED CARBIDE(PVD)
TURNING INSERT
a PVD coating prolongs tool life under the same cutting conditions compared to uncoated carbide.
a Coating of tools with sharp edges is possible without softening or changing the edge quality of the
substrate.
SELECTION STANDARD
a TURNING
Recommended CuttingSpeed
Work Material Recommended Grade ISO Application Range
(m/min)
P 120
VP10RT (100 ─ 150) P01
120
VP10RT
VP15TF (100 ─ 150) P10
120
VP20MF
VP20RT
UP20M
VP15TF
Steel VP20MF (100 ─ 150) P20
120
VP20RT (100 ─ 150) P30
120
UP20M (100 ─ 150) P40
M 120
VP10RT (100 ─ 150) M01
120
VP10RT
VP15TF (100 ─ 150) M10
120
VP20MF
VP20RT
VP15TF
UP20M
Stainless Steel VP20MF (100 ─ 150) M20
120
MP7035
VP20RT (100 ─ 150) M30
120
UP20M (100 ─ 150) M40
K 120 K01
VP10RT (100 ─ 150)
VP10RT
K10
120
Cast Iron VP15TF (100 ─ 150)
VP20RT
VP15TF
K20
120
VP20RT (100 ─ 150) K30
S 60
MP9005
VP05RT
VP10RT
50
MP9015 (25 ─ 80) S10
Heat Resistant Alloy
40
VP20RT
VP15TF
New technology
High Al-(Al,Ti)N single layer coating
64
TURNING INSERT
CERMET
TURNING INSERT
a The optimized alloy structure and special alloy binder improves both wear and fracture resistance.
a It covers a wide application range and reduces the number of tools required.
a NX3035 for wet cutting.
a NX2525 for dry cutting.
SELECTION STANDARD
a TURNING
NX2525
Steel P10
NX3035
Interrupted 200
Cutting
NX3035 (190 ─ 260) P20
K
K01
NX2525
Cast Iron 180
Ductile Cast Iron
Finishing NX2525 (150 ─ 210) K10
K20
GRADE CHARACTERISTICS
Thermal Conductivity Thermal Expansion
Grade Hardness (HRA) T.R.S (GPa) (W/m • K)
* (×10-6/K)
65
TURNING INSERT
COATED CERMET
TURNING INSERT
a Coated cermet (PVD coating) has superior wear and fracture resistance, and therefore provides a
stable cutting performance.
SELECTION STANDARD
a TURNING
Cutting Recommended
Work Material Recommended Grade ISO Application Range
Mode CuttingSpeed (m/min)
P
P01
Continuous VP25N 240
AP25N
VP25N
Cutting AP25N (190 ─ 290)
P10
MP3025
Steel
VP45N
P20
Interrupted 230
Cutting
MP3025 (180 ─ 280)
P30
K
K01
AP25N
VP25N
Cast Iron VP25N 160
Finishing (110 ─ 230) K10
Ductile Cast Iron AP25N
K20
66
TURNING INSERT
CEMENTED CARBIDE
TURNING INSERT
a UTi grades are available for steel and cast iron. HTi grades are available for non-ferrous and
non-metal materials and are also suitable for cast iron.
SELECTION STANDARD
a TURNING
Recommended Cutting
Work Material Recommended Grade ISO Application Range
Speed (m/min)
P P10
100
Steel UTi20T P20
UTi20T
(60 ─ 130)
P30
M M10
100
Stainless Steel UTi20T M20
UTi20T
(60 ─ 130)
M30
K
HTi05T
120 K01
HTi05T (80 ─ 150)
HTi10
K10
100
Cast Iron HTi10 (50 ─ 150)
UTi20T
K20
100
UTi20T (50 ─ 150) K30
N N01
HTi10
600 N10
Non-Ferrous Metal HTi10 (400 ─ 800) N20
N30
S 70
MT9005
RT9005
RT9010
MT9015
S10
Heat-resistant Alloy MT9015 60
Ti Alloy RT9010 (40 ─ 80)
S20
TF15
50
TF15 (40 ─ 70) S30
GRADE CHARACTERISTICS
Thermal Conductivity Thermal Expansion Young's Modulus
ISO Grade Hardness (HRA) (W/m•K)
* (x10-6/K) (GPa)
*
T.R.S(GPa)
*
P M UTi20T 90.5 38 5.5 520 2.0
N HTi05T 92.5 79 4.5 600 1.5
K HTi10 92.0 79 4.6 630 2.0
MT9005/RT9005 92.2 79 4.5 600 2.0
S MT9015/RT9010 92.0 79 4.6 630 2.2
TF15 91.5 71 5.3 580 2.5
67
TURNING INSERT
a Compared to normal cemented carbide, micro-grain types have higher wear resistance and toughness.
SELECTION STANDARD
Cutting Tool Recommended Grade Work Material
SF10
PCB Miniature Drill MF10 Non-Metal
MF20
HTi10
Solid End Mill TF15 Steel • Cast Iron
MF10
GRADE CHARACTERISTICS
Grade
Grade Characteristics
** ISO
Wear
Resistance
Fracture
Resistance
Corrosion
Resistance
Specific Gravity Hardness (HRA) T.R.S (GPa)
*
HTi10 14.9 92.0 3.2 K10 e u u
* 1GPa=102kg/mm
2
** After HIP
68
Memo
Memo
69
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
ap (mm)
Controls chip clogging during high-feed cutting and prevents chips of 2
soft work materials from running onto their surfaces. 1 Flank
Large rake angle controls vibrations and work deformation when 0 0.1 0.3 0.5 20°
machining low-rigidity workpieces. f (mm/rev)
ap (mm)
2
Double sided chipbreaker.
Stable chip control even at small depth of cut. 1 Flank
0 0.1 0.2 0.3 0.4 12°
f (mm/rev)
M
Mild Steel Nose CNMG_FS DN
FS Alternative chipbreaker for finishing mild steel
3 16°
Double sided chipbreaker.
ap (mm)
2
Stable chip control even at small depth of cut.
Sharp edge gives best performance. 1 Flank
0 0.1 0.2 0.3 0.4 8°
f (mm/rev)
2
Effectively controls adhesive chips.
1 Flank
Suitable for mild steel finishing.
Finish Cutting
0.2
0 0.1 0.2 0.3 0.4 15°
f (mm/rev)
2
Double sided chipbreaker.
Ideal for heat-resistant alloy and titanium alloy. 1 Flank
The sharp edge produces good cutting surface. 0 0.1 0.2 0.3 0.4 9°
The curved edge allows smooth chip discharge. f (mm/rev)
2
Double sided chipbreaker.
G class insert tolerance is suitable for workpieces requiring close 1 Flank
dimensional tolerances. 0 15°
0.1 0.2 0.3 0.4
Stable chip control even at small depth of cut. f (mm/rev)
G
Carbon Steel • Alloy Steel
R/L-FS Precise finishing
3 Flank
Double sided chipbreaker.
ap (mm)
2
A narrow lead chipbreaker for good chip control. 14°
The sharp edge produces a good surface finish. 1
2
Lead chipbreaker controls chip flow. 14°
The sharp edge produces a good surface finish. 1
4 0.1
and alloy steel 3
15°
ap (mm)
70
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
Flank
Flank
Flank
Flank
Flank
TNGG_R/L-FS
Flank R/L-FS
^ 122
TNGG_R/L-F VNGG_R/L-F
Flank R/L-F
^ 121 ^ 128
Flank
0.2
^ 102 ^ 108 ^ 115 ^ 121 ^ 128 ^ 130
71
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
Nose
LM First recommendation for light cutting of stainless Stainless Steel
0.50 CNMG_LM DN
4 15°
steel 3
ap (mm)
M class double sided chip breaker. 2
Stable chip control at light cutting range. 1 Flank
Breaker with high rake angle provides excellent burr control. 20°
0 0.1 0.3 0.5
f (mm/rev)
First recommendation for light cutting of cast iron Cast Iron CNMG_LK DN
LK 4 Flank
Narrow positive land provides low cutting resistance and excellent
ap (mm)
3 15° 0.15
finish. 2
1
6°
0 0.1 0.3 0.5
f (mm/rev)
ap (mm)
3 0.15
Enhanced chip disposal for depth of cut smaller than the corner R. 20°
2
1
0 0.1 0.3 0.5
f (mm/rev)
4 25° 0.3
and alloy steel
ap (mm)
3 10°
Double sided chipbreaker.
M 2
Flank
Superior chip control at small depth of cuts. 1
25° 0.34
Covers copying and back turning with wavy edge. 0 0.1 0.3 0.5
Recommended for workpieces in the 200 ─ 300HB range. f (mm/rev) 8°
3 7°
The wiper allows up to two times higher feed. 2
Wiper design for increased productivity and improved surface finish. Flank
1
18° 0.15
0 0.1 0.3 0.5
f (mm/rev) 7°
3
Effectively controls adhesive chips. 2
Suitable for mild steel light cutting. Flank
1
0.2
0 0.1 0.3 0.5 10°
f (mm/rev)
3
Double sided chipbreaker. 2
Suitable for light cutting. Flank
1
The curved edge allows smooth chip discharge. 0 0.1 0.3 0.5 12°
f (mm/rev)
3
Double sided chipbreaker. 0.2
2 15°
Parallel chipbreaker controls chip flow. 1
Suitable for finish-light cutting. 0 0.1 0.3 0.5
Precision chipbreaker. f (mm/rev)
72
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
Nose
0.50 CNMG_LM DNMG_LM SNMG_LM TNMG_LM VNMG_LM WNMG_LM
LM
Flank
Flank
CNMG_LK DNMG_LK SNMG_LK TNMG_LK VNMG_LK WNMG_LK
LK
0.15
6°
Flank
0.2
Flank
SNMG_R/L-1G TNMG_R/L-1G
Flank R/L-1G
0.2
^ 116 ^ 122
73
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
ap (mm)
3
0.25
G Parallel chipbreaker. 2 14°
Excellent chip control at low to medium feed rates. 1
0 0.1 0.3 0.5
f (mm/rev)
4 13°
difficult-to-cut materials
ap (mm)
3
Double sided chipbreaker.
M 2
Flank
Ideal for heat-resistant alloy and titanium alloy. 1
The sharp edge produces a good surface finish. 0 9°
0.1 0.3 0.5
The curved edge allows smooth chip discharge. f (mm/rev)
ap (mm)
3
Double sided chipbreaker, Single sided chipbreaker (D type, V type).
G 2
The sharp edge produces a good surface finish. 1 Flank
Ideal for heat-resistant alloy and titanium alloy. 0 0.1 0.3 0.5 9°
The curved edge allows smooth chip discharge. f (mm/rev)
First recommendation for medium cutting of cast iron Cast Iron CNMG_MK DN
MK 5 Flank
Optimum balance between sharpness and high edge strength 4
ap (mm)
15° 0.25
for general use. 3
2
Medium Cutting
1 3°
0 0.1 0.3 0.5
f (mm/rev)
M
Cast Iron CNMG_GK DN
GK Alternative chip breaker for medium cutting for cast iron 7 Flank
Breakers are suitable for a wide range of applications.
ap (mm)
5 15° 0.25
Maintenance of high stability by the flat-land. 3
1
0 0.1 0.3 0.5 0.7
f (mm/rev)
15°
M class double sided chip breaker. 3
Alternative chip breaker of main chip breaker LM and MM. 2 Flank
Excellent notch wear resistance for light to medium cutting. 1 0.5
25°
0 0.1 0.3 0.5
f (mm/rev) 15°
6°
Alternative chipbreaker for finishing and light cutting of 3
cast iron 2 Flank
1 0.2
Double sided chipbreaker. 0 0.1 22°
0.3 0.5
Positive land provides sharp cutting action. f (mm/rev) 6°
74
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
TNGG_R/L-K
Flank R/L-K
0.25
^ 127
Nose
CNMG_MJ DNMG_MJ TNMG_MJ VNMG_MJ WNMG_MJ
MJ(M)
Flank
Flank
Flank
0.2
^ 103 ^ 110 ^ 116 ^ 123 ^ 128 ^ 131
Nose
CNMG_MM DNMG_MM SNMG_MM TNMG_MM VNMG_MM WNMG_MM
0.3
MM
Flank
0.3
Flank
CNMG_MK DNMG_MK SNMG_MK TNMG_MK VNMG_MK WNMG_MK
MK
0.25
3°
Flank
CNMG_GK DNMG_GK SNMG_GK TNMG_GK VNMG_GK WNMG_GK
GK
0.25
Flank
0.5
5°
^ 104 ^ 110 ^ 116 ^ 123 ^ 129 ^ 132
Nose
CNMG_MA DNMG_MA SNMG_MA TNMG_MA VNMG_MA WNMG_MA
0.2
MA
°
Flank
0.2
75
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
ap (mm)
carbon steel and alloy steel 3
ap (mm)
and alloy steel 3
Double sided chipbreaker. 2 Flank
1 0.25
Flat land offers high edge strength. 0 0.1 0.3 0.5
15°
f (mm/rev)
ap (mm)
Double sided chipbreaker. 3
2 Flank
The wiper allows up to two times higher feed. 1
19° 0.3
A wide chip pocket prevents chip jamming. 0 0.1 0.3 0.5
f (mm/rev)
M Nose
Stainless Steel
Medium Cutting
Stainless Steel
R/L-ES Alternative chipbreaker for medium cutting of 5 Flank
stainless steel 4
ap (mm)
3 0.2
Double sided chipbreaker. 14°
2
Parallel chipbreaker controls chip flow. 1
Suitable for light to medium cutting. 0 0.1 0.3 0.5
f (mm/rev)
3 0.25
G Parallel chipbreaker. 14°
2
Good chip control for medium feed rates. 1
0 0.1 0.3 0.5
f (mm/rev)
5
Double sided chip breaker.
3
For interrupted cuts and removing scale. Flank
Rough Cutting
1 0.33
Good balance of cutting edge strength and low cutting resistance 0 0.1 0.3 0.5 0.7
because of suitable rake angle. f (mm/rev)
M
Stainless Steel Nose
RM First recommendation for rough cutting of stainless 0.32
CNMG_RM DN
7
steel 3°
ap (mm)
5
M class double sided chip breaker.
3 Flank
Excellent fracture resistance at interrupted cutting due to the
1 0.32
optimum land angle and honing geometry. 0 0.1 0.3 0.5 0.7
6°
f (mm/rev)
76
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
Nose
0.25
CNMG_MH DNMG_MH SNMG_MH TNMG_MH VNMG_MH WNMG_MH
MH
Flank
0.35
Flank
0.25
TNMG_R/L-ES
Flank R/L-ES
0.16
^ 126
TNMG_R/L-2G
Flank R/L-2G
0.2
^ 122
Nose
0.32
CNMG_RM DNMG_RM SNMG_RM TNMG_RM WNMG_RM
RM
Flank
0.32
77
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
For rough cutting of carbon steel, alloy steel and Cast Iron CNMG_RK DN
RK stainless steel 7 Flank
ap (mm)
Seating surface and wide land 3 or more times that of conventional
5 15° 0.35
3
products and provide high cutting stability for interrupted machining
and scale removal. 1
0 0.1 0.3 0.5 0.7
f (mm/rev)
ap (mm)
5 25° 0.2
Positive land increases welding resistance and suppresses chip
3
welding and abrasion at low speed cutting. 10°
Rough Cutting
1
0 0.1 0.3 0.5 0.7
f (mm/rev)
M Nose
Carbon Steel • Alloy Steel CNMG_GH DN
GH For rough cutting of carbon steel, alloy steel and 7 0.32
stainless steel 18°
ap (mm)
5
Double sided chipbreaker.
3 Flank
For interrupted cuts and removing scale.
1 0.32
A combination of wide land and a large chip pocket allows high feed rates. 0 0.1 0.3 0.5 0.7 18°
f (mm/rev)
10
Single sided chipbreaker.
6 Flank
Covers the lower end of the heavy cutting region. 0.42
2 22°
Low cutting resistance due to positive land and curved edge. 0 0.2 0.6 1.0 1.4
Teardrop dots improve chip control without increasing cutting resistance. f (mm/rev) 6°
First recommendation for mild steel and stainless steel Mild Steel CNMM_HL DN
HL 14
Low resistance due to narrow flat land.
ap (mm)
10
Achieves high chip breaking ability. 15° 0.34mm
6
2
0 0.2 0.6 1.0 1.4 1.8
f (mm/rev)
Assist breaker for mild steel and stainless steel Mild Steel CNMM_HM
HM
Heavy Cutting
14
Flat land provides outstanding balance between cutting edge
ap (mm)
10
strength and sharpness. 0.32 mm
M 6 16°
2
0
0.2 0.6 1.0 1.4 1.8
f (mm/rev)
First recommendation for heavy cutting of carbon steel Carbon Steel • Alloy Steel Nose
HX 23° 0.43
CNMM_HX
and alloy steel 14
ap (mm)
10
Single sided chipbreaker.
Covers the medium range of the heavy cutting region. 6 Flank
Owing to the straight edge and chamfer, 21° 0.52
2
it gives a balance of sharpness and strength. 0 0.2 0.6 1.0 1.4
Variable land and a wavy chipbreaker for good chip control. f (mm/rev)
Assist breaker for general steel and alloy steel Carbon Steel • Alloy Steel CNMM_HR
HR 14
High cutting edge strength.
ap (mm)
10 0.58mm
Excellent chip discharge even with high feed and high depth of cut.
6 20°
2
0
0.2 0.6 1.0 1.4 1.8
f (mm/rev)
78
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
Flank
CNMG_RK DNMG_RK SNMG_RK TNMG_RK WNMG_RK
RK
° 0.35
CNMM_HM SNMM_HM
HM
0.32 mm
^ 107 ^ 120
Nose
0.43
CNMM_HX SNMM_HX
HX
Flank
0.52
^ 106 ^ 119
CNMM_HR SNMM_HR
HR
0.58 mm
^ 107 ^ 120
79
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
14 20° 0.68
and alloy steel
ap (mm)
10
Single sided chipbreaker.
M 6 Flank
Covers the upper end of the heavy cutting region.
2 20° 0.68
Wide land and large chamfer offer high edge strength. 0 0.2 0.6 1.0 1.4
A wide chipbreaker prevents chip jamming. f (mm/rev)
ap (mm)
5
Most effective for unstable machining due to its high edge strength.
M 3
1
For Cast Iron
Cast Iron D
Flat Top For cast iron 7
Double sided flat insert. 0°
ap (mm)
5
G Most effective for unstable machining due to its high edge strength. 3
Can be used on workpieces requiring close tolerances due to G class
1
insert tolerance. 0 0.1 0.3 0.5 0.7
f (mm/rev)
80
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
Nose
0.68
CNMM_HV SNMM_HV
HV
Flank
0.68
^ 107 ^ 119
81
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
First recommendation for finishing carbon steel and Carbon Steel • Alloy Steel Nose
FP alloy steel 3
6°
ap (mm)
Breaker protrusion at the corner tip controls chips even at small 2
ap (mm)
2
depth of cut.
M Maintains the edge strength at the corner and prevents sudden fractures. 1 Flank
Finish Cutting
ap (mm)
2
Suitable for low depths of cut and low feed rates.
Sharp cutting edge and low resistance design achieves excellent cutting 1
Flank
performance. 0 0.1 0.2 0.3 0.4 8°
f (mm/rev)
2
13°
G Sharp cutting edge gives a good surface finish.
1
First recommendation for light cutting of carbon Carbon Steel • Alloy Steel Nose
LP steel and alloy steel 3 18°
ap (mm)
Prevents welding of the insert and controls white turbidity of the surface finish. 1 Flank
Breaker protrusion suitable for depth of cut area achieves a wide 0 0.1 0.2 0.3 0.4 8°
range of chip control. f (mm/rev)
steel 3 18°
ap (mm)
2
Large rake angle provides sharp cutting action.
A peninsular dot ensures chip control at depths of cut under 1mm. 1 Flank
0 0.1 0.2 0.3 0.4 8°
f (mm/rev)
82
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
VBMT_FP
FP
^ 160
VBMT_FM
FM
^ 160
VBMT_FV
FV
^ 160
VBGT_R/L-F WBGT_R/L-F
Flank
R/L-F
^ 160 ^ 166
VBMT_LP
LP
^ 160
VBMT_LM
LM
^ 160
VBMT_SV
SV
^ 160
VBMT_MK
Flank MK
0.1
^ 161
0.1 VBMT_MP
MP
0.1
^ 160
83
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
ap (mm)
Good balance of wear resistance and fracture resistance because of 2
the flat land cutting edge. 1
0.1 Flank
A wide chip pocket controls increasing of the cutting resistance and 0 18°
0.1 0.2 0.3 0.4
reduces vibration and chip jamming even at large depth of cut. f (mm/rev)
Medium cutting of carbon steel, alloy steel and Carbon Steel • Alloy Steel Nose
Standard stainless steel 3
0.1
18°
ap (mm)
Balance of edge strength and sharpness due to a combination of a 2
flat land and large rake angle. 1
0.1 Flank
0 0.1 0.2 0.3 0.4 18°
f (mm/rev)
M
Carbon Steel • Alloy Steel Nose
MV Medium cutting of carbon steel, alloy steel, mild steel 0.1
and stainless steel 3 18°
10°
ap (mm)
2
A positive insert with a large rake angle achieves sharp cutting edge
performance. 1 Flank
0.1
The double breakers and round-shaped dots in the rake face achieve 0 0.1 0.2 0.3 0.4 18°
a wide range of chip discharge. f (mm/rev) 10°
2
A positive insert with a large rake angle achieves sharp cutting edge
performance. 1
Medium Cutting
Flank
The double breakers and round-shaped dots in the rake face achieve 0.16
0 0.1 0.2 0.3 0.4 20°
a wide range of chip discharge. f (mm/rev) 8°
2
Insert designed for low resistance chip control. 30°
1
4
Excellent chip control for low to medium feed rates. 20°
E 2
0 0.1 0.3
f (mm/rev)
4
Excellent chip control for low to medium feed rates. 20°
The wiper produces good cutting surface. 2
0 0.1 0.3
f (mm/rev)
3
Flat top. 0°
ap (mm)
2
M Most effective for unstable machining due to its high edge strength.
1
84
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
Nose VBMT_MM
0.1
MM
0.1 Flank
^ 160
Nose VBMT
0.1
Standard
0.1 Flank
^ 161
Nose VBMT_MV
0.1 MV
0°
Flank
0.1
0°
^ 161
Nose WBMT_R/L-MV
0.16 R/L-MV
°
Flank
0.16
° ^ 166
VBET_R/L-SR
Flank R/L-SR
^ 161
VBET_R/L-SN
Flank R/L-SN
^ 161
VBET_R/LW-SN
Flank R/LW-SN
^ 161
VBMW
Flat Top(M)
^ 161
85
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
First recommendation for finishing carbon steel and Carbon Steel • Alloy Steel Nose CCMT_FP DCMT
FP
alloy steel 3 6°
ap (mm)
Breaker protrusion at the corner tip controls chips even at small depth 2
of cut. 1 Flank
Maintains the edge strength at the corner and prevents sudden fractures. 6°
0 0.1 0.2 0.3 0.4
f (mm/rev)
First recommendation for finishing stainless steel Stainless Steel Nose CCMT_FM DCMT
FM
Breaker protrusion at the corner tip controls chips even at small depth 3 6°
ap (mm)
of cut. 2
M Maintains the edge strength at the corner and prevents sudden fractures. 1 Flank
0
6°
0.1 0.2 0.3 0.4
f (mm/rev)
FV First recommendation for finishing carbon steel, Carbon Steel • Alloy Steel Nose CCMT_FV DCMT
alloy steel, mild steel and stainless steel 3
18°
ap (mm)
Suitable for low depths of cut and low feed rates. 2
Sharp cutting edge and low resistance design achieves excellent cutting 1
Flank
performance. 0 0.1 0.2 0.3 0.4 8°
f (mm/rev)
materials 3 14°
ap (mm)
2 17°
Sharp cutting edge gives a good surface finish.
1
86
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Rhombic 25° Round
Breaker Name
Section
and
metry
Cross Section
Flank
Flank
CCGT_FJ
FJ
^ 138
WCGT_R/L
Flank R/L
^ 167
87
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
LP First recommendation for light cutting of carbon steel Carbon Steel • Alloy Steel Nose CCMT_LP DCMT
and alloy steel 3 18°
ap (mm)
Sharp cutting edge due to a large rake angle. 2
Prevents welding of the insert and controls white turbidity of the surface finish. 1 Flank
Breaker protrusion suitable for depth of cut area achieves a wide range
0 0.1 0.2 0.3 0.4 8°
of chip control.
f (mm/rev)
LM First recommendation for light cutting of stainless steel Stainless Steel Nose CCMT_LM DCMT
3 18°
Sharp cutting edge due to a large rake angle.
ap (mm)
Prevents welding of the insert and controls white turbidity of the surface finish. 2
Breaker protrusion suitable for depth of cut area achieves a wide range 1 Flank
of chip control. 8°
0 0.1 0.2 0.3 0.4
f (mm/rev)
ap (mm)
2
M suitable for copying.
1
Flank
Light Cutting
2 12°
The wiper allows up to two times higher feed.
Positive land improves sharpness. 1
0.12 Flank
0 0.1 0.2 0.3 0.4 16°
8°
f (mm/rev)
R/L-SS Light cutting of automatic lathe machining Carbon Steel • Alloy Steel CCGT_R/L-SS DCGT_R
6 Flank
A parallel chipbreaker.
ap (mm)
4 14°
Excellent chip control at low feed rates.
2
0 0.1 0.3
f (mm/rev)
Nose
Medium Cutting
First recommendation for medium cutting of carbon Carbon Steel • Alloy Steel CCMT_MP DCMT
MP steel and alloy steel 3 18°
0.1
ap (mm)
88
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Rhombic 25° Round
Breaker Name
Section
and
metry
Cross Section
Flank
Flank
Nose XCMT_SVX
SVX
Flank
^ 169
Flank
Nose CCMT_SW
0.12 SW
°
0.12 Flank
8°
^ 139
CCGT_R/L-SS DCGT_R/L-SS
Flank R/L-SS
^ 139 ^ 146
0.1 Flank
89
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
First recommendation for medium cutting of stainless Stainless Steel Nose CCMT_MM DCMT
MM steel 3 18°
0.1
ap (mm)
Good balance of wear resistance and fracture resistance because of 2
the flat land cutting edge. 1
0.1 Flank
A wide chip pocket controls increasing of the cutting resistance and 18°
0 0.1 0.2 0.3 0.4
reduces vibration and chip jamming even at large depth of cut. f (mm/rev)
First recommendation for medium cutting of cast iron Cast Iron CCMT_MK DCMT
MK 3 Flank
Optimum balance between sharpness and high edge strength
ap (mm)
for general use. 2 0.1
18°
1
Nose
Carbon Steel • Alloy Steel
0.1 CCMT DCM
3 18°
ap (mm)
2
Standard 1
0.1 Flank
0 18°
First recommendation for medium cutting of carbon steel, 0.1 0.2 0.3 0.4
alloy steel, mild steel, stainless steel and cast iron f (mm/rev)
M Balance of edge strength and sharpness due to a combination of a
flat land and large rake angle. Flank
0.2
15°
Nose
Medium Cutting
Alternative chipbreaker for medium cutting of carbon steel, Carbon Steel • Alloy Steel CCMH_MV DCMT
MV 0.18
alloy steel, mild steel and stainless steel 3 20°
ap (mm)
2 12°
A positive insert and the large rake angle achieve sharp cutting edge
performance. 1 Flank
The double breakers and round shape in the rake face achieve 20° 0.18
0 0.1 0.2 0.3 0.4
a wide range of chip discharge. f (mm/rev) 12°
Nose
Wiper insert for medium cutting of carbon steel, Carbon Steel • Alloy Steel CCMT_MW
MW 0.2
alloy steel, mild steel and stainless steel 3 18°
ap (mm)
2 7°
The wiper allows up to two times higher feed.
A wide chip pocket prevents chip jamming. 1
Flank
0 0.1 0.2 0.3 0.4 18° 0.2
f (mm/rev) 7°
Medium cutting of automatic lathe machining Carbon Steel • Alloy Steel CCET_R/L-SR DCET_R
R/L-SR 3 Flank
A wide lead chipbreaker.
ap (mm)
2 30°
Insert designed for low resistance chip control.
1
4
Excellent chip control at low to medium feed rates. 20°
Suitable for precise machining with E class tolerance. 2
0 0.1 0.3
f (mm/rev)
Medium cutting of automatic lathe machining Carbon Steel • Alloy Steel CCGT_R/L-SN DCGT_R
R/L-SN 6 Flank
A parallel chipbreaker.
ap (mm)
4
Excellent chip control at low to medium feed rates. 20°
G 2
0 0.1 0.3
f (mm/rev)
90
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Rhombic 25° Round
Breaker Name
Section
and
metry
Cross Section
0.1 Flank
0.1 Flank
^ 151
Nose
CCMH_MV DCMT_MV VCMT_MV
0.18 MV
2°
Flank
0.18
2° ^ 141 ^ 147 ^ 163
Nose
CCMT_MW
0.2 MW
°
Flank
0.2
° ^ 141
CCET_R/L-SR DCET_R/L-SR
Flank R/L-SR
^ 141 ^ 147
CCET_R/L-SN DCET_R/L-SN
Flank R/L-SN(E)
^ 141 ^ 148
CCGT_R/L-SN DCGT_R/L-SN
Flank R/L-SN(G)
^ 142 ^ 148
91
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
Medium cutting of automatic lathe machining Carbon Steel • Alloy Steel CCET_R/LW-SN DCET_R
R/LW-SN 6 Flank
A parallel chipbreaker.
ap (mm)
4 20°
E Excellent chip control at low to medium feed rates.
2
The wiper produces a good surface finish.
Medium Cutting
0 0.1 0.3
f (mm/rev)
Medium cutting of automatic lathe machining Carbon Steel • Alloy Steel Nose CCGT_SMG DCGT_
SMG 3 14°
3D moulded chipbreaker provides good chip control.
ap (mm)
2
G G class insert gives sharp cutting action,
1
allowing high precision machining. Flank
Breaker geometry appropriate for copying and back turning. 0 0.1 0.2 0.3 0.4 9°
f (mm/rev)
12
A wide groove chipbreaker prevents chips 0.3
ap (mm)
8 28°
M from jamming at large depths of cut.
4
Small dimples improve chip control at small depths of cut.
0 0.2 0.6 1.0 1.4
f (mm/rev)
Flat Top Heavy cutting of cast iron Cast Iron CCMW DCM
3
Flat top. 0°
ap (mm)
2
M Most effective for unstable machining due to its high edge strength.
1
For Cast Iron
2
G Most effective for unstable machining due to its high edge strength.
1
Can be used on workpieces requiring close tolerances
due to G class insert tolerance. 0 0.1 0.2 0.3 0.4
f (mm/rev)
92
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Rhombic 25° Round
Breaker Name
Section
and
metry
Cross Section
CCET_R/LW-SN DCET_R/LW-SN
Flank R/LW-SN
^ 142 ^ 148
Flank
^ 142 ^ 148
RCMX_RR
RR
0.3
^ 151
CCGW DCGW
Flat Top(G)
^ 142 ^ 149
93
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
Nose
FV First recommendation for finishing carbon steel, Carbon Steel • Alloy Steel CPMH_FV
alloy steel, mild steel and stainless steel 3
18°
ap (mm)
2
M Suitable for low depths of cut and low feed rates.
Sharp cutting edge and low resistance design achieves excellent cutting 1 Flank
performance. 0 0.1 0.2 0.3 0.4 8°
f (mm/rev)
ap (mm)
aluminium alloy 2 15°
G
Small wide lead chipbreaker. 1
Sharp cutting edge gives a good surface finish. 0 0.1 0.2 0.3 0.4
f (mm/rev)
ap (mm)
2 15°
M Sharp cutting edge gives a good surface finish.
1
2
Sharp cutting edge gives a good surface finish. 15°
1
3 Flank
Lead chipbreaker controls chip flow.
ap (mm)
2 10°
G Good chip control for low to medium feed rates.
1
2 25°
Good chip control for low to medium feed rates.
1
2
M Good chip control for low to medium feed rates.
1
10°
2
15°
E Sharp cutting edge gives a good surface finish.
1
2
G G class insert gives sharp cutting action,
1 Flank
allowing high precision machining.
Breaker geometry appropriate for copying and back turning. 0 0.1 0.2 0.3 0.4 11°
f (mm/rev)
94
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
CPMH_FV TPMH_FV
FV
^ 144 ^ 158
TPGH_R/L-FS WPGT_R/L-FS
R/L-FS
^ 158 ^ 168
CPMH_R/L-F
R/L-F(M)
^ 144
CPGT_R/L-F
R/L-F(G)
^ 144
TPGX_R/L
R/L
^ 159
CPGT
Standard
^ 144
TPMX_L
Flank L
^ 159
VPET_R/L-SRF
Flank SRF
^ 165
Nose
VPGT_SMG
SMG
Flank
^ 165
95
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
SV First recommendation for light cutting of carbon steel, Carbon Steel • Alloy Steel Nose CPMH_SV
Light Cutting
3
alloy steel, mild steel, stainless steel and cast iron 18°
ap (mm)
2
M Large rake angle provides sharp cutting action.
A peninsular dot ensures chip control at depths of cut under 1mm. 1
Flank
0 0.1 0.2 0.3 0.4 8°
f (mm/rev)
Standard Alternative chipbreaker for medium cutting of carbon steel, Carbon Steel • Alloy Steel Nose CPMX
10°
alloy steel and stainless steel 3
ap (mm)
Standard, general purpose chipbreaker. 2
1 Flank
Medium Cutting
0
10°
0.1 0.2 0.3 0.4
f (mm/rev)
M
MV First recommendation for medium cutting of carbon steel, Carbon Steel • Alloy Steel Nose CPMH_MV
3 20° 0.2
alloy steel, mild steel, stainless steel and cast iron
8°
ap (mm)
2
A positive insert and large rake angle achieves sharp cutting edge
performance. 1 Flank
20° 0.2
Double breakers in the rake face achieve a wide range of chip discharge. 0 0.1 0.2 0.3 0.4
8°
f (mm/rev)
Cast Iron
Flat Top Heavy cutting of cast iron
3
Flat top. 0°
ap (mm)
2
M Most effective for unstable machining due to its high edge strength.
1
For Cast Iron
Cast Iron
Flat Top For cast iron
3
Flat top. 0°
ap (mm)
2
G Most effective for unstable machining due to its high edge strength.
1
Can be used on workpieces requiring close tolerances
due to G class insert tolerance. 0 0.1 0.2 0.3 0.4
f (mm/rev)
96
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
CPMH_SV TPMH_SV
SV
^ 144 ^ 158
0.2
°
^ 144 ^ 159 ^ 168
SPMW
Flat Top(M)
^ 154
SPGX TPGX
Flat Top(G)
^ 154 ^ 159
97
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
Aluminium Alloy
R/L For aluminium alloy cutting
3 Flank
Lead chipbreaker.
ap (mm)
2 20°
G Sharp cutting edge gives a good surface finish.
1
Breaker Name
Cross Section
and Features
Geometry
Picture
ap (mm)
2
Sharp cutting edge gives a good surface finish. 20°
For Aluminium Alloy
98
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section
and
metry
Cross Section
VDGX_R/L
R/L
^ 164
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80° Round
Breaker Name
Section and
metry Cross Section
DEGX_R/L-F
R/L-F
^ 150
DEGX_R/L TEGX_R/L
R/L
^ 150 ^ 157
99
TURNING INSERT
CLASSIFICATION
TURNING INSERT
Breaker Name
Cross Section
and Features
Geometry
Picture
ap (mm)
5 0°
M Most effective for unstable machining due to high edge 3
strength and stable insert clamping.
1
For Cast Iron
Cast Iron S
Flat Top For cast iron 7
Double sided flat insert.
ap (mm)
5 0°
G Most effective for unstable machining due to high edge 3
strength and stable insert clamping.
1
Can be used on workpieces requiring close tolerances due to G class 0 0.1 0.3 0.5 0.7
insert tolerance. f (mm/rev)
Breaker Name
Cross Section
and Features
Geometry
Picture
Cast Iron
Flat Top For cast iron
For Cast Iron
3
Double sided flat insert.
ap (mm)
2 0°
G Most effective for unstable machining due to high edge
1
strength and stable insert clamping.
0 0.1 0.2 0.3 0.4
Can be used on workpieces requiring close tolerances due to G class
insert tolerance. f (mm/rev)
Breaker Name
Cross Section
and Features
Geometry
Picture
3 Flank
A parallel chipbreaker.
ap (mm)
2
G Good chip control for low to medium feed rates.
1
15°
Nose
Standard Light to medium cutting of carbon steel, alloy steel
3
and stainless steel 0°
ap (mm)
2
M Standard, general purpose chipbreaker.
1
Flank
0 0.1 0.2 0.3 0.4 0°
f (mm/rev)
Cast Iron S
Flat Top Heavy cutting of cast iron
3
Flat top.
ap (mm)
2 0°
M Most effective for unstable machining due to high edge
1
strength and stable insert clamping.
For Cast Iron
Cast Iron S
Flat Top For cast iron
3
Flat top.
ap (mm)
2
0°
G Most effective for unstable machining due to high edge
1
strength and stable insert clamping.
Can be used on workpieces requiring close tolerances due to G class 0 0.1 0.2 0.3 0.4
insert tolerance. f (mm/rev)
100
TURNING INSERT
CLASSIFICATION
TURNING INSERT
SPECIAL PURPOSE INSERTS
Application
Rhombic 80° Square 90° Triangular 60°
Tolerance
Breaker Name
Section
and Tool Holder Type Inserts
metry
Cross Section
Special
G TL Type
SNGN TNGN
Flat Top(G)
^ 135 ^ 136
TCGN
Flat Top
^ 172
SPGR_R TPGR_R/L
R/L
^ 171 ^ 173
SPMR TPMR
Standard
^ 171 ^ 173
SPMN TPMN
Flat Top(M)
^ 171 ^ 173
SPGN TPGN
Flat Top(G)
^ 171 ^ 173
101
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 400
Product Information TOOLS) >> 296 GRADES >> 58
80° IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
FP CNMG120402-FP 0.2 ● ● ● ●
CNMG120404-FP 0.4 ● ● ● ●
R
CNMG120408-FP 0.8 ● ● ● ●
S FH CNMG120402-FH 0.2 ● ▲ ● ● ●
CNMG120404-FH 0.4 ● ▲ ● ● ●
CNMG120408-FH 0.8 ● ● ● ●
T CNMG120412-FH 1.2 ● ●
FS CNMG120404-FS 0.4 ▲ ●
V
CNMG120408-FS 0.8 ●
W FY CNMG120404-FY 0.4 ▲ ● ● ● ●
CNMG120408-FY 0.8 ▲ ● ● ●
CNGG120401-FJ 0.1 ● ●
FJ
CNGG120402-FJ 0.2 ● ●
CNGG120404-FJ 0.4 ● ● ●
CNGG120408-FJ 0.8 ● ● ●
CNGG1204V5-FJ 0.05 ● ●
PK
CNGG120404-PK 0.4 ●
LP CNMG120404-LP 0.4 ● ● ● ● ● ●
CNMG120408-LP 0.8 ● ● ● ● ● ●
CNMG120412-LP 1.2 ● ● ● ● ●
LM CNMG120404-LM 0.4 ● ● ●
CNMG120408-LM 0.8 ● ● ●
CNMG120412-LM 1.2 ● ● ●
LK CNMG120404-LK 0.4 ● ●
CNMG120408-LK 0.8 ● ●
CNMG120412-LK 1.2 ● ●
102
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
LS CNMG120404-LS 0.4 ● ● ●
C
CNMG120408-LS 0.8 ● ● ●
D
CNMG09T304-SH 0.4 ● ●
SH
CNMG09T308-SH 0.8 ●
● ● ▲ ● ● ● ● ● ● ●
R
CNMG120404-SH 0.4
CNMG120408-SH 0.8 ● ● ▲ ● ● ● ● ● ● ●
CNMG120412-SH 1.2 ● ● ▲ ● ●
S
SA CNMG120404-SA 0.4 ● ● ▲ ● ● ● ●
CNMG120408-SA 0.8 ● ● ▲ ● ● ● ●
T
CNMG120412-SA 1.2 ● ● ▲ ● ● ●
SW CNMG120404-SW 0.4 ● ● ● ▲ ● ● ● ● ● ●
V
CNMG120408-SW 0.8 ● ● ● ▲ ● ● ● ● ● ●
CNMG120412-SW 1.2 ● ● ● ▲ ● ● ●
W
SY CNMG120404-SY 0.4 ▲ ● ● ●
CNMG120408-SY 0.8 ▲ ● ● ●
C CNMG120404-C 0.4 ▲ ▲
CNMG120408-C 0.8 ▲ ▲
MJ CNGG120404-MJ 0.4 ● ● ● ●
CNGG120408-MJ 0.8 ● ● ● ●
MJ CNMG120404-MJ 0.4 ● ● ● ●
CNMG120408-MJ 0.8 ● ● ● ●
CNMG120412-MJ 1.2 ● ● ●
CNMG120416-MJ 1.6 ● ● ●
CNMG120404-MP 0.4 ● ● ▲ ● ● ● ● ●
CNMG120408-MP 0.8 ● ● ▲ ● ● ● ● ●
MP
CNMG120412-MP 1.2 ● ● ▲ ● ● ● ● ●
CNMG120416-MP 1.6 ● ● ▲ ● ● ● ●
CNMG160608-MP 0.8 ● ● ▲ ● ●
CNMG160612-MP 1.2 ● ● ▲ ● ●
CNMG160616-MP 1.6 ● ● ▲ ● ●
MM CNMG120408-MM 0.8 ● ● ●
CNMG120412-MM 1.2 ● ● ●
CNMG120416-MM 1.6 ● ● ●
CNMG160608-MM 0.8 ● ● ●
103
TURNING INSERT
CN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
CNMG160612-MM 1.2 ● ● ●
C
CNMG160616-MM 1.6 ● ● ●
CNMG190608-MM 0.8 ● ● ●
D CNMG190612-MM 1.2 ● ● ●
CNMG190616-MM 1.6 ● ● ●
CNMG120404-MK 0.4 ● ●
R CNMG120408-MK 0.8 ● ●
CNMG120412-MK 1.2 ● ●
MK
CNMG120416-MK 1.6 ● ●
S
CNMG160608-MK 0.8 ● ●
CNMG160612-MK 1.2 ● ●
T CNMG160616-MK 1.6 ● ●
CNMG190612-MK 1.2 ● ●
CNMG190616-MK 1.6 ● ●
V GK CNMG120404-GK 0.4 ● ●
CNMG120408-GK 0.8 ● ●
W CNMG120412-GK 1.2 ● ●
GM CNMG120404-GM 0.4 ● ● ●
CNMG120408-GM 0.8 ● ● ●
CNMG120412-GM 1.2 ● ● ●
CNMG120404-MA 0.4 ● ● ▲ ● ● ● ● ▲ ● ● ● ● ● ● ● ●
CNMG120408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ● ●
CNMG120412-MA 1.2 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ● ●
MA
CNMG120416-MA 1.6 ● ● ▲ ▲ ● ● ●
CNMG160608-MA 0.8 ● ● ▲ ● ● ● ● ● ●
CNMG160612-MA 1.2 ● ● ▲ ● ● ● ● ▲ ● ●
CNMG160616-MA 1.6 ● ● ● ● ● ● ●
CNMG190612-MA 1.2 ● ● ▲ ● ● ● ● ▲ ● ● ●
CNMG190616-MA 1.6 ● ▲ ● ● ● ● ●
CNMG120404-MH 0.4 ● ● ▲ ● ▲
CNMG120408-MH 0.8 ● ● ▲ ● ● ● ● ▲ ●
CNMG120412-MH 1.2 ● ● ▲ ● ● ● ● ▲ ●
MH
CNMG120416-MH 1.6 ● ● ▲ ●
CNMG160608-MH 0.8 ● ● ●
CNMG160612-MH 1.2 ● ● ▲ ● ● ● ▲ ●
CNMG160616-MH 1.6 ● ● ●
CNMG190612-MH 1.2 ● ● ▲ ● ● ● ● ▲ ●
CNMG190616-MH 1.6 ● ● ▲
CNMG090308 0.8 ●
Standard
CNMG09T304 0.4 ● ● ● ●
CNMG09T308 0.8 ● ● ● ●
CNMG120404 0.4 ● ● ▲ ● ● ● ● ● ● ● ● ● ●
CNMG120408 0.8 ● ● ▲ ● ● ● ● ● ● ● ● ● ● ●
104
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
CNMG120412 1.2 ● ● ▲ ● ● ● ● ● ● ● ●
C
CNMG120416 1.6 ● ● ● ● ● ●
CNMG160608 0.8 ● ● ▲ ● ● ●
CNMG160612 1.2 ● ● ▲ ● ● ● ● ● D
CNMG160616 1.6 ● ● ● ● ● ● ●
CNMG190608 0.8 ● ● ▲ ● ● ● ●
CNMG190612 1.2 ● ● ▲ ● ● ● ● ● ● R
CNMG190616 1.6 ● ● ▲ ● ● ● ● ●
MW CNMG120408-MW 0.8 ● ● ▲ ● ● ● ● ● ● ●
S
CNMG120412-MW 1.2 ● ● ▲ ● ● ● ● ● ● ●
T
CNMG090304-MS 0.4 ●
CNMG090308-MS 0.8 ● ●
CNMG09T304-MS 0.4 ● ● V
CNMG09T308-MS 0.8 ● ●
MS
CNMG120404-MS 0.4 ● ▲ ▲ ● ● ● ● ● ● ● ●
W
CNMG120408-MS 0.8 ● ▲ ▲ ● ● ● ● ● ● ● ● ●
CNMG120412-MS 1.2 ● ▲ ● ● ● ● ● ●
CNMG160608-MS 0.8 ●
CNMG160612-MS 1.2 ●
CNMG190612-MS 1.2 ●
CNMG190616-MS 1.6 ●
CNMG120404-MS 0.4 ● ● ●
MS
CNMG120408-MS 0.8 ● ● ●
CNMG120412-MS 1.2 ● ● ●
CNMG160612-MS 1.2 ● ● ●
CNMG160616-MS 1.6 ● ● ●
CNMG120408-RP 0.8 ● ● ● ● ●
CNMG120412-RP 1.2 ● ● ● ● ●
RP
CNMG120416-RP 1.6 ● ● ● ● ●
CNMG160612-RP 1.2 ● ● ● ● ●
CNMG160616-RP 1.6 ● ● ● ● ●
CNMG190612-RP 1.2 ● ● ● ● ●
CNMG190616-RP 1.6 ● ● ● ● ●
CNMG120408-RM 0.8 ● ● ●
CNMG120412-RM 1.2 ● ● ●
RM
CNMG120416-RM 1.6 ● ● ●
CNMG160612-RM 1.2 ● ● ●
CNMG160616-RM 1.6 ● ● ●
CNMG190612-RM 1.2 ● ● ●
CNMG190616-RM 1.6 ● ● ●
105
TURNING INSERT
CN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
CNMG120408-RK 0.8 ● ●
C
CNMG120412-RK 1.2 ● ●
RK CNMG120416-RK 1.6 ● ●
D CNMG160608-RK 0.8 ● ●
CNMG160612-RK 1.2 ● ●
CNMG160616-RK 1.6 ● ●
R CNMG190612-RK 1.2 ● ●
CNMG190616-RK 1.6 ● ●
CNMG120408-RS 0.8 ● ●
S
CNMG120412-RS 1.2 ● ●
RS
CNMG120416-RS 1.6 ● ●
T CNMG160612-RS 1.2 ● ●
CNMG160616-RS 1.6 ● ●
CNMG190612-RS 1.2 ● ●
V CNMG190616-RS 1.6 ● ●
CNMG120408-GH 0.8 ● ● ▲ ▲ ● ● ●
CNMG120412-GH 1.2 ● ● ▲ ▲ ● ● ●
W GH
CNMG120416-GH 1.6 ● ● ● ●
CNMG160612-GH 1.2 ● ● ▲ ▲ ● ● ●
CNMG160616-GH 1.6 ● ● ● ●
CNMG190612-GH 1.2 ● ● ▲ ● ● ●
CNMG190616-GH 1.6 ● ● ▲ ▲ ● ● ●
CNMG120408-GJ 0.8 ● ● ● ●
GJ CNMG120412-GJ 1.2 ● ● ● ●
CNMG120416-GJ 1.6 ● ● ● ●
CNMG160612-GJ 1.2 ● ● ●
CNMG190612-GJ 1.2 ● ● ●
CNMG190616-GJ 1.6 ● ● ●
CNMM120408-HZ 0.8 ● ▲ ● ●
CNMM120412-HZ 1.2 ● ▲ ● ●
HZ
CNMM120416-HZ 1.6 ●
CNMM160612-HZ 1.2 ● ▲
CNMM160616-HZ 1.6 ● ▲
CNMM190612-HZ 1.2 ● ▲ ●
CNMM190616-HZ 1.6 ● ▲ ●
CNMM120408-HX 0.8 ● ●
CNMM120412-HX 1.2 ● ●
HX CNMM160612-HX 1.2 ● ●
CNMM160616-HX 1.6 ● ●
CNMM190612-HX 1.2 ● ▲ ● ● ●
CNMM190616-HX 1.6 ● ▲ ● ● ●
CNMM190624-HX 2.4 ● ▲ ● ● ●
CNMM250924-HX 2.4 ● ▲ ● ● ●
106
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
HV CNMM190616-HV 1.6 ● ▲ ● ● ●
C
CNMM190624-HV 2.4 ● ▲ ● ● ●
CNMM250924-HV 2.4 ● ▲ ● ● ●
D
CNMA120404 0.4 ● ● ● ● ● ●
CNMA120408 0.8 ● ● ● ● ● ●
CNMA120412 1.2 ● ● ● ● R
Flat Top
CNMA120416 1.6 ● ● ● ●
CNMA160612 1.2 ● ● ● ●
S
CNMA160616 1.6 ● ● ● ●
CNMA190612 1.2 ● ● ● ●
CNMA190616 1.6 ● ● ● ●
T
CNMA190624 2.4 ● ●
CNMM120408-HL 0.8 ● ● ●
CNMM120412-HL 1.2 ● ● ● V
HL CNMM120416-HL 1.6 ●
CNMM160612-HL 1.2 ● ● ●
CNMM160616-HL 1.6 ● ● ● W
CNMM190612-HL 1.2 ● ● ●
CNMM190616-HL 1.6 ● ● ●
CNMM190624-HL 2.4 ● ● ●
CNMM160612-HM 1.2 ● ● ●
HM CNMM160616-HM 1.6 ● ● ●
CNMM190612-HM 1.2 ● ● ●
CNMM190616-HM 1.6 ● ● ●
CNMM190624-HM 2.4 ● ● ●
CNMM250924-HM 2.4 ● ●
HR
CNMM250924-HR 2.4 ● ●
107
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 401
Product Information TOOLS) >> 300 GRADES >> 58
55° IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
DNMG150402-FP 0.2 ● ● ● ●
DNMG150404-FP 0.4 ● ● ● ●
R FP
DNMG150408-FP 0.8 ● ● ● ●
DNMG150602-FP 0.2 ● ● ● ●
S DNMG150604-FP 0.4 ● ● ● ●
DNMG150608-FP 0.8 ● ● ● ●
DNMG150402-FH 0.2 ● ▲ ● ● ●
T DNMG150404-FH 0.4 ● ● ● ● ●
FH
DNMG150408-FH 0.8 ● ● ● ●
DNMG150602-FH 0.2 ● ▲ ● ● ●
V
DNMG150604-FH 0.4 ● ▲ ●
DNMG150608-FH 0.8 ● ▲ ●
W FS DNMG150404-FS 0.4 ●
DNMG150408-FS 0.8 ▲ ●
DNMG150404-FY 0.4 ▲ ● ● ● ●
FY
DNMG150408-FY 0.8 ▲ ● ● ●
DNMG150604-FY 0.4 ●
DNMG150608-FY 0.8 ▲ ●
FJ DNGG150404-FJ 0.4 ● ● ●
DNGG150408-FJ 0.8 ● ● ●
PK
DNGG150404-PK 0.4 ●
DNMG110404-LP 0.4 ● ● ● ● ● ●
DNMG110408-LP 0.8 ● ● ● ● ● ●
DNMG150404-LP 0.4 ● ● ● ● ● ●
LP
DNMG150408-LP 0.8 ● ● ● ● ● ●
DNMG150412-LP 1.2 ● ● ● ● ● ●
DNMG150604-LP 0.4 ● ● ● ● ● ●
DNMG150608-LP 0.8 ● ● ● ● ● ●
DNMG150612-LP 1.2 ● ● ● ● ●
DNMG110404-LM 0.4 ● ● ●
DNMG110408-LM 0.8 ● ● ●
LM DNMG150404-LM 0.4 ● ● ●
DNMG150408-LM 0.8 ● ● ●
DNMG150412-LM 1.2 ● ● ●
DNMG150604-LM 0.4 ● ● ●
DNMG150608-LM 0.8 ● ● ●
108
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
DNMG150612-LM 1.2 ● ● ●
C
DNMG110408-LK 0.8 ● ●
DNMG150404-LK 0.4 ● ●
LK DNMG150408-LK 0.8 ● ● D
DNMG150412-LK 1.2 ● ●
DNMG150604-LK 0.4 ● ●
DNMG150608-LK 0.8 ● ● R
DNMG150612-LK 1.2 ● ●
DNMG150404-LS 0.4 ● ● ●
LS S
DNMG150408-LS 0.8 ● ● ●
DNMG150604-LS 0.4 ● ● ●
DNMG150608-LS 0.8 ● ● ● T
DNMG110404-SH 0.4 ● ● ●
DNMG110408-SH 0.8 ● ● ●
DNMG150404-SH 0.4 ● ● ▲ ● ● ● ● ● ● ● V
SH
DNMG150408-SH 0.8 ● ● ▲ ● ● ● ● ● ● ●
DNMG150412-SH 1.2 ● ● ▲ ● ● ● ● ● ●
W
DNMG150604-SH 0.4 ● ●
DNMG150608-SH 0.8 ● ● ●
DNMG150612-SH 1.2 ● ● ●
DNMG150404-SA 0.4 ● ● ▲ ● ● ● ●
DNMG150408-SA 0.8 ● ● ▲ ● ● ● ●
SA
DNMG150412-SA 1.2 ● ● ▲ ● ● ●
DNMG150604-SA 0.4 ● ● ▲ ●
DNMG150608-SA 0.8 ● ● ▲ ●
DNMG150612-SA 1.2 ● ● ▲ ●
DNMX110404-SW 0.4 ● ●
DNMX110408-SW 0.8 ● ●
DNMX150404-SW 0.4 ● ● ● ▲ ● ● ●
SW
DNMX150408-SW 0.8 ● ● ● ▲ ● ● ●
DNMX150412-SW 1.2 ● ● ● ▲ ● ●
DNMX150604-SW 0.4 ● ● ● ▲ ● ● ●
DNMX150608-SW 0.8 ● ● ● ▲ ● ● ●
DNMX150612-SW 1.2 ● ● ● ▲ ● ●
DNMG150404-SY 0.4 ▲ ● ● ●
SY
DNMG150408-SY 0.8 ▲ ● ● ●
DNMG150604-SY 0.4 ●
DNMG150608-SY 0.8 ▲ ●
DNMG150404-C 0.4 ▲ ▲
C
DNMG150408-C 0.8 ▲ ▲
DNMG150604-C 0.4 ▲ ▲
DNMG150608-C 0.8 ▲ ▲
MJ DNGM150404-MJ 0.4 ● ● ● ●
DNGM150408-MJ 0.8 ● ● ● ●
109
TURNING INSERT
DN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
DNMG150404-MJ 0.4 ● ● ● ●
C
DNMG150408-MJ 0.8 ● ● ● ●
DNMG150412-MJ 1.2 ● ● ●
MJ
D DNMG150416-MJ 1.6 ● ● ●
DNMG150604-MJ 0.4 ● ● ●
DNMG150608-MJ 0.8 ● ● ●
R DNMG150612-MJ 1.2 ● ● ●
DNMG150616-MJ 1.6 ● ● ●
DNMG150404-MP 0.4 ● ● ▲ ● ● ● ● ●
S
DNMG150408-MP 0.8 ● ● ▲ ● ● ● ● ●
DNMG150412-MP 1.2 ● ● ▲ ● ● ● ● ●
MP
T DNMG150416-MP 1.6 ● ● ▲ ● ● ● ●
DNMG150604-MP 0.4 ● ● ▲ ● ● ● ● ●
DNMG150608-MP 0.8 ● ● ▲ ● ● ● ● ●
V DNMG150612-MP 1.2 ● ● ▲ ● ● ● ● ●
DNMG150616-MP 1.6 ● ● ▲ ● ● ● ●
DNMG150408-MM 0.8 ● ● ●
W MM
DNMG150412-MM 1.2 ● ● ●
DNMG150608-MM 0.8 ● ● ●
DNMG150612-MM 1.2 ● ● ●
DNMG110408-MK 0.8 ● ●
DNMG150404-MK 0.4 ● ●
MK DNMG150408-MK 0.8 ● ●
DNMG150412-MK 1.2 ● ●
DNMG150604-MK 0.4 ● ●
DNMG150608-MK 0.8 ● ●
DNMG150612-MK 1.2 ● ●
DNMG150404-GK 0.4 ● ●
DNMG150408-GK 0.8 ● ●
GK
DNMG150412-GK 1.2 ● ●
DNMG150604-GK 0.4 ● ●
DNMG150608-GK 0.8 ● ●
DNMG150612-GK 1.2 ● ●
DNMG150404-GM 0.4 ● ● ●
DNMG150408-GM 0.8 ● ● ●
GM
DNMG150412-GM 1.2 ● ● ●
DNMG150604-GM 0.4 ● ● ●
DNMG150608-GM 0.8 ● ● ●
DNMG150612-GM 1.2 ● ● ●
DNMG110404-MA 0.4 ● ● ● ●
MA DNMG110408-MA 0.8 ● ● ● ●
DNMG110412-MA 1.2 ● ● ● ●
DNMG150404-MA 0.4 ● ● ▲ ● ● ● ● ▲ ● ● ● ● ● ● ●
DNMG150408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ●
110
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
DNMG150412-MA 1.2 ● ● ▲ ● ● ● ● ● ● ● ● ● ● ● ●
C
DNMG150604-MA 0.4 ● ● ▲ ● ● ● ● ▲ ● ● ● ● ●
DNMG150608-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ●
DNMG150612-MA 1.2 ● ● ▲ ● ● ● ● ● ▲ ● ● ● ● ● ● ● D
DNMG150616-MA 1.6 ●
DNMG150404-MH 0.4 ● ● ▲
DNMG150408-MH 0.8 ● ● ▲ ● ● ● ● ▲ ● R
MH
DNMG150412-MH 1.2 ● ● ▲ ● ● ● ▲ ●
DNMG150604-MH 0.4 ● ● ●
S
DNMG150608-MH 0.8 ● ● ▲ ● ● ● ▲ ●
DNMG150612-MH 1.2 ● ● ▲ ● ● ● ●
DNMG110408 0.8 ● T
DNMG150404 0.4 ● ● ▲ ● ● ● ● ● ● ● ●
DNMG150408 0.8 ● ● ▲ ● ● ● ● ● ● ● ● ● ●
Standard DNMG150412 1.2 ● ● ▲ ● ● ● ● ● ● ● V
DNMG150416 1.6 ● ● ● ●
DNMG150604 0.4 ● ● ▲ ● ● ● ● ● ●
W
DNMG150608 0.8 ● ● ▲ ● ● ● ● ● ● ● ●
DNMG150612 1.2 ● ● ▲ ● ● ● ● ● ●
DNMG150616 1.6 ● ● ● ●
DNMX150408-MW 0.8 ● ● ● ● ● ● ●
MW
DNMX150412-MW 1.2 ● ● ● ● ● ● ●
DNMX150608-MW 0.8 ● ● ● ▲ ● ● ● ●
DNMX150612-MW 1.2 ● ● ● ● ●
DNMG110408-MS 0.8 ● ●
DNMG150404-MS 0.4 ● ▲ ▲ ● ● ● ● ●
MS DNMG150408-MS 0.8 ● ▲ ● ● ● ● ● ● ●
DNMG150412-MS 1.2 ● ● ● ● ●
DNMG150604-MS 0.4 ● ▲ ● ● ● ● ●
DNMG150608-MS 0.8 ● ▲ ● ● ● ●
DNMG150612-MS 1.2 ● ● ● ●
DNMG150404-MS 0.4 ● ● ●
DNMG150408-MS 0.8 ● ● ●
MS
DNMG150412-MS 1.2 ● ● ●
DNMG150604-MS 0.4 ● ● ●
DNMG150608-MS 0.8 ● ● ●
DNMG150612-MS 1.2 ● ● ●
DNMG150408-RP 0.8 ● ● ● ● ●
DNMG150412-RP 1.2 ● ● ● ● ●
RP
DNMG150416-RP 1.6 ● ● ● ● ●
DNMG150608-RP 0.8 ● ● ● ● ●
DNMG150612-RP 1.2 ● ● ● ● ●
DNMG150616-RP 1.6 ● ● ● ● ●
111
TURNING INSERT
DN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
DNMG150408-RM 0.8 ● ● ●
C
DNMG150412-RM 1.2 ● ● ●
RM
DNMG150416-RM 1.6 ● ● ●
D DNMG150608-RM 0.8 ● ● ●
DNMG150612-RM 1.2 ● ● ●
DNMG150616-RM 1.6 ● ● ●
R DNMG150408-RK 0.8 ● ●
RK
DNMG150412-RK 1.2 ● ●
DNMG150608-RK 0.8 ● ●
S
DNMG150612-RK 1.2 ● ●
DNMG150408-RS 0.8 ● ●
T DNMG150412-RS 1.2 ● ●
RS
DNMG150416-RS 1.6 ● ●
DNMG150608-RS 0.8 ● ●
V DNMG150612-RS 1.2 ● ●
DNMG150616-RS 1.6 ● ●
DNGG150404L 0.4 ● ● ● ●
W
DNGG150404R 0.4 ● ● ● ●
DNGG150408L 0.8 ● ●
R/L
DNGG150408R 0.8 ● ● ●
DNGG150604L 0.4 ●
DNGG150604R 0.4 ● ●
DNGG150608L 0.8 ●
DNGG150608R 0.8 ●
DNMG150408-GH 0.8 ● ● ▲ ● ● ●
GH
DNMG150412-GH 1.2 ● ● ▲ ▲ ● ● ●
DNMG150608-GH 0.8 ● ● ▲ ● ● ●
DNMG150612-GH 1.2 ● ● ▲ ● ● ●
DNMG150408-GJ 0.8 ● ● ● ●
DNMG150412-GJ 1.2 ● ● ● ●
GJ
DNMG150416-GJ 1.6 ● ● ● ●
DNMG150608-GJ 0.8 ● ●
DNMG150612-GJ 1.2 ● ●
DNMG150616-GJ 1.6 ● ●
DNMM150408-HZ 0.8 ● ▲ ● ●
HZ
DNMM150412-HZ 1.2 ● ▲ ● ●
DNMM150608-HZ 0.8 ● ▲ ● ●
DNMM150612-HZ 1.2 ● ▲ ● ●
Flat Top DNGA150404 0.4 ●
DNGA150408 0.8 ● ●
112
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
DNMA150604 0.4 ● ●
C
DNMA150608 0.8 ● ● ● ●
DNMA150612 1.2 ● ● ● ●
DNMM150408-HL 0.8 ● ● ● D
HL
DNMM150412-HL 1.2 ● ● ●
DNMM150608-HL 0.8 ● ● ●
DNMM150612-HL 1.2 ● ● ● R
113
TURNING INSERT
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
Standard
R RNMG120400 ● ▲ ● ●
114
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 402
Product Information TOOLS) >> 303 GRADES >> 58
90° IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
FP SNMG120404-FP 0.4 ● ● ● ●
R
SNMG120408-FP 0.8 ● ● ● ●
S
FH SNMG090304-FH 0.4 ●
SNMG090308-FH 0.8 ●
SNMG120404-FH 0.4 ● ● ● T
SNMG120408-FH 0.8 ● ●
FS
V
SNMG120408-FS 0.8 ●
W
LP SNMG120404-LP 0.4 ● ● ● ● ● ●
SNMG120408-LP 0.8 ● ● ● ● ● ●
SNMG120412-LP 1.2 ● ● ● ● ●
LM SNMG120404-LM 0.4 ● ● ●
SNMG120408-LM 0.8 ● ● ●
LK SNMG120408-LK 0.8 ● ●
SNMG120412-LK 1.2 ● ●
SH SNMG120404-SH 0.4 ● ●
SNMG120408-SH 0.8 ● ● ▲ ● ●
SNMG120412-SH 1.2 ● ▲ ●
SA SNMG120404-SA 0.4 ● ●
SNMG120408-SA 0.8 ● ● ▲ ●
SNMG120412-SA 1.2 ● ▲ ●
SY
SNMG120408-SY 0.8 ▲ ●
115
TURNING INSERT
SN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
C SNMG090304-C 0.4 ▲
C
SNMG090308-C 0.8 ▲
SNMG120408-C 0.8 ▲ ▲
D
SNMG120416-C 1.6 ▲
SNMG120408R-1G 0.8 ●
S
MP SNMG120404-MP 0.4 ● ● ▲ ● ● ● ● ●
SNMG120408-MP 0.8 ● ● ▲ ● ● ● ● ●
T
SNMG120412-MP 1.2 ● ● ▲ ● ● ● ● ●
V SNMG120408-MM 0.8 ● ● ●
SNMG120412-MM 1.2 ● ● ●
MM SNMG120416-MM 1.6 ● ● ●
W
SNMG150608-MM 0.8 ● ● ●
SNMG150612-MM 1.2 ● ● ●
SNMG150616-MM 1.6 ● ● ●
SNMG190612-MM 1.2 ● ● ●
SNMG190616-MM 1.6 ● ● ●
SNMG120408-MK 0.8 ● ●
SNMG120412-MK 1.2 ● ●
MK
SNMG120416-MK 1.6 ● ●
SNMG150612-MK 1.2 ● ●
SNMG150616-MK 1.6 ● ●
SNMG190612-MK 1.2 ● ●
SNMG190616-MK 1.6 ● ●
GK SNMG120404-GK 0.4 ● ●
SNMG120408-GK 0.8 ● ●
SNMG120412-GK 1.2 ● ●
GM SNMG120404-GM 0.4 ● ● ●
SNMG120408-GM 0.8 ● ● ●
SNMG120412-GM 1.2 ● ● ●
MA SNMG120404-MA 0.4 ● ● ▲ ● ● ● ● ● ● ● ● ● ●
SNMG120408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ●
SNMG120412-MA 1.2 ● ● ▲ ● ● ● ● ● ▲ ● ● ● ● ● ● ●
SNMG120416-MA 1.6 ●
116
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
SNMG150608-MA 0.8 ● ● ▲ ● ●
C
SNMG150612-MA 1.2 ● ● ▲ ● ● ● ● ● ●
SNMG150616-MA 1.6 ● ● ● ●
D
SNMG190612-MA 1.2 ● ● ▲ ● ● ● ●
SNMG190616-MA 1.6 ● ● ▲ ● ● ● ● ●
MH SNMG120408-MH 0.8 ● ● ▲ ● ● ● ▲ ● R
SNMG120412-MH 1.2 ● ● ▲ ● ● ● ▲ ●
SNMG190612-MH 1.2 ● ● ▲ ● S
SNMG190616-MH 1.6 ● ● ▲
SNMG090304 0.4 ● ● ▲ ● ● ● ● ● ●
T
SNMG090308 0.8 ● ● ▲ ● ● ● ● ● ● ● ●
SNMG120404 0.4 ● ● ▲ ● ● ● ● ● ●
SNMG120408 0.8 ● ● ▲ ● ● ● ● ● ● ● ● ● ● ● ● ● V
Standard
SNMG120412 1.2 ● ● ▲ ● ● ● ● ● ● ● ●
SNMG120416 1.6 ● ▲ ● ● ● ● ● ● ● W
SNMG120420 2 ▲ ● ● ●
SNMG150612 1.2 ● ● ▲ ● ● ● ● ● ●
SNMG150616 1.6 ● ● ●
SNMG190612 1.2 ● ● ▲ ● ● ● ● ● ● ●
SNMG190616 1.6 ● ● ▲ ● ● ● ● ● ●
SNMG090304-MS 0.4 ●
SNMG090308-MS 0.8 ●
MS
SNMG120404-MS 0.4 ● ▲ ●
SNMG120408-MS 0.8 ● ▲ ▲ ● ● ● ● ● ● ● ●
SNMG120412-MS 1.2 ● ▲ ● ● ● ● ●
SNMG120416-MS 1.6 ●
SNMG190616-MS 1.6 ●
SNMG120404-MS 0.4 ● ● ●
MS
SNMG120408-MS 0.8 ● ● ●
SNMG120412-MS 1.2 ● ● ●
SNMG150612-MS 1.2 ● ● ●
SNMG150616-MS 1.6 ● ● ●
SNMG120408-RP 0.8 ● ● ● ● ●
RP SNMG120412-RP 1.2 ● ● ● ● ●
SNMG120416-RP 1.6 ● ● ● ● ●
SNMG150612-RP 1.2 ● ● ● ● ●
SNMG150616-RP 1.6 ● ● ● ● ●
SNMG190612-RP 1.2 ● ● ● ● ●
117
TURNING INSERT
SN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
SNMG190616-RP 1.6 ● ● ● ● ●
C
SNMG120408-RM 0.8 ● ● ●
SNMG120412-RM 1.2 ● ● ●
D RM
SNMG120416-RM 1.6 ● ● ●
SNMG150612-RM 1.2 ● ● ●
R SNMG150616-RM 1.6 ● ● ●
SNMG190612-RM 1.2 ● ● ●
S SNMG190616-RM 1.6 ● ● ●
SNMG120408-RK 0.8 ● ●
SNMG120412-RK 1.2 ● ●
T RK
SNMG120416-RK 1.6 ● ●
SNMG150612-RK 1.2 ● ●
V SNMG150616-RK 1.6 ● ●
SNMG190612-RK 1.2 ● ●
W SNMG190616-RK 1.6 ● ●
SNMG120408-RS 0.8 ● ●
RS
SNMG120412-RS 1.2 ● ●
SNMG120416-RS 1.6 ● ●
SNMG150616-RS 1.6 ● ●
SNMG190616-RS 1.6 ● ●
SNGG090304L 0.4 ● ● ●
SNGG090304R 0.4 ● ● ● ●
SNGG090308R 0.8 ● ●
SNGG120404L 0.4 ● ● ● ●
SNGG120404R 0.4 ● ● ● ●
SNGG120408L 0.8 ● ● ● ● ●
SNGG120408R 0.8 ● ● ●
SNMG120408-GH 0.8 ● ● ▲ ▲ ● ● ●
SNMG120412-GH 1.2 ● ● ▲ ▲ ● ● ●
GH
SNMG120416-GH 1.6 ● ● ●
SNMG150612-GH 1.2 ● ●
SNMG150616-GH 1.6 ●
SNMG190612-GH 1.2 ● ● ●
SNMG190616-GH 1.6 ● ● ▲ ●
118
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
SNMM120408-HZ 0.8 ● ▲ ● ●
C
HZ
SNMM120412-HZ 1.2 ● ▲ ● ●
SNMM150612-HZ 1.2 ● ▲
D
SNMM190612-HZ 1.2 ● ▲ ●
SNMM190616-HZ 1.6 ● ▲ ●
SNMM120408-HX 0.8 ● ● R
SNMM120412-HX 1.2 ● ●
HX SNMM150612-HX 1.2 ● ● S
SNMM190612-HX 1.2 ● ▲ ● ● ●
SNMM190616-HX 1.6 ● ▲ ● ● ●
T
SNMM190624-HX 2.4 ● ▲ ● ● ●
SNMM250724-HX 2.4 ● ▲ ● ● ●
SNMM250924-HX 2.4 ● ▲ ● ● ● V
HV SNMM190616-HV 1.6 ● ▲ ● ● ●
SNMM190624-HV 2.4 ● ▲ ● ● ● W
SNMM250724-HV 2.4 ● ▲ ● ● ●
SNMM250924-HV 2.4 ● ▲ ● ● ●
SNGA120404 0.4 ●
SNGA120408 0.8 ● ● ●
SNMA090304 0.4 ●
SNMA090308 0.8 ● ● ● ● ●
SNMA120408 0.8 ● ● ● ● ● ● ●
Flat Top
SNMA120412 1.2 ● ● ● ● ●
SNMA120416 1.6 ● ● ● ●
SNMA150612 1.2 ● ●
SNMA150616 1.6 ● ●
SNMA190612 1.2 ● ● ● ●
SNMA190616 1.6 ● ● ● ●
SNMM120408-HL 0.8 ● ● ●
HL SNMM120412-HL 1.2 ● ● ●
SNMM150612-HL 1.2 ● ● ●
SNMM190612-HL 1.2 ● ● ●
SNMM190616-HL 1.6 ● ● ●
SNMM190624-HL 2.4 ● ● ●
119
TURNING INSERT
SN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
SNMM150612-HM 1.2 ● ● ●
C
HM SNMM190612-HM 1.2 ● ● ●
SNMM190616-HM 1.6 ● ● ●
D
SNMM190624-HM 2.4 ● ● ●
SNMM250724-HM 2.4 ● ●
R SNMM250924-HM 2.4 ● ●
HR SNMM250724-HR 2.4 ● ●
S
SNMM250924-HR 2.4 ● ●
120
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 403
Product Information 60° TOOLS) >> 310 GRADES >> 58
IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
FP TNMG160402-FP 0.2 ● ● ● ●
TNMG160404-FP 0.4 ● ● ● ● R
TNMG160408-FP 0.8 ● ● ● ●
TNMG110304-FH 0.4 ●
FH S
TNMG160402-FH 0.2 ● ▲ ● ● ●
TNMG160404-FH 0.4 ● ● ● ● ●
T
TNMG160408-FH 0.8 ● ▲ ● ● ● ●
FS TNMG160404-FS 0.4 ▲ ●
V
TNMG160408-FS 0.8 ▲ ●
FY TNMG160404-FY 0.4 ▲ ● ● ● ● W
TNMG160408-FY 0.8 ▲ ● ● ●
TNGG160402L-F 0.2 ● ● ● ●
TNGG160402R-F 0.2 ● ● ● ●
R/L-F
TNGG160404L-F 0.4 ● ● ● ●
TNGG160404R-F 0.4 ● ● ● ●
TNGG160408L-F 0.8 ● ● ● ●
TNGG160408R-F 0.8 ● ● ● ●
PK TNGG160404-PK 0.4 ●
TNGG160408-PK 0.8 ●
TNMG160404-LP 0.4 ● ● ● ● ● ●
LP ● ● ● ● ● ●
TNMG160408-LP 0.8
TNMG160412-LP 1.2 ● ● ● ● ● ●
TNMG220408-LP 0.8 ● ● ● ● ● ●
TNMG220412-LP 1.2 ● ● ● ● ●
LM TNMG160404-LM 0.4 ● ● ●
TNMG160408-LM 0.8 ● ● ●
TNMG160412-LM 1.2 ● ● ●
LK TNMG160404-LK 0.4 ● ●
TNMG160408-LK 0.8 ● ●
TNMG160412-LK 1.2 ● ●
121
TURNING INSERT
TN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
LS TNMG160404-LS 0.4 ● ● ●
C
TNMG160408-LS 0.8 ● ● ●
D
SH TNMG160404-SH 0.4 ● ● ▲ ● ● ● ● ● ● ●
TNMG160408-SH 0.8 ● ● ▲ ● ● ● ● ● ● ●
R
TNMG220408-SH 0.8 ● ● ●
TNMG160404-SA 0.4 ● ● ▲ ● ● ● ●
S
SA TNMG160408-SA 0.8 ● ● ▲ ● ● ● ●
TNMG160412-SA 1.2 ● ● ▲ ●
T
TNMG220408-SA 0.8 ● ● ▲
TNMG220412-SA 1.2 ●
V SW TNMX160404-SW 0.4 ● ● ● ▲ ● ● ●
TNMX160408-SW 0.8 ● ● ● ▲ ● ● ●
W
SY TNMG160404-SY 0.4 ▲ ● ● ● ●
TNMG160408-SY 0.8 ▲ ● ● ●
TNMG160404-C 0.4 ▲ ▲
C
TNMG160408-C 0.8 ▲ ▲
TNMG220404-C 0.4 ▲ ▲
TNMG220408-C 0.8 ▲
TNMG160404L-1G 0.4 ●
R/L-1G
TNMG160404R-1G 0.4 ●
TNMG220404L-1G 0.4 ●
TNMG220404R-1G 0.4 ●
TNMG160404L-2G 0.4 ●
R/L-2G
TNMG160404R-2G 0.4 ●
TNMG160408L-2G 0.8 ●
TNMG160408R-2G 0.8 ●
TNGG160402L-FS 0.2 ●
R/L-FS
TNGG160402R-FS 0.2 ●
TNGG160404L-FS 0.4 ●
TNGG160404R-FS 0.4 ●
MJ TNMG160404-MJ 0.4 ● ● ● ●
TNMG160408-MJ 0.8 ● ● ● ●
TNMG160412-MJ 1.2 ● ● ●
122
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
TNMG160404-MP 0.4 ● ● ▲ ● ● ● ● ●
C
MP
TNMG160408-MP 0.8 ● ● ▲ ● ● ● ● ●
TNMG160412-MP 1.2 ● ● ▲ ● ● ● ● ●
D
TNMG220408-MP 0.8 ● ● ▲ ● ● ● ●
TNMG220412-MP 1.2 ● ● ▲ ● ● ● ●
TNMG160408-MM 0.8 ● ● ● R
MM TNMG160412-MM 1.2 ● ● ●
TNMG220408-MM 0.8 ● ● ● S
TNMG220412-MM 1.2 ● ● ●
TNMG220416-MM 1.6 ● ● ●
T
TNMG160404-MK 0.4 ● ●
TNMG160408-MK 0.8 ● ●
MK
TNMG160412-MK 1.2 ● ● V
TNMG220408-MK 0.8 ● ●
TNMG220412-MK 1.2 ● ● W
TNMG220416-MK 1.6 ● ●
TNMG160404-GK 0.4 ● ●
GK TNMG160408-GK 0.8 ● ●
TNMG160412-GK 1.2 ● ●
TNMG220408-GK 0.8 ● ●
TNMG220412-GK 1.2 ● ●
TNMG160404-GM 0.4 ● ● ●
GM TNMG160408-GM 0.8 ● ● ●
TNMG160412-GM 1.2 ● ● ●
TNMG220408-GM 0.8 ● ● ●
TNMG220412-GM 1.2 ● ● ●
TNMG160404-MA 0.4 ● ● ▲ ● ● ● ● ▲ ● ● ● ● ● ● ●
TNMG160408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ●
TNMG160412-MA 1.2 ● ● ▲ ● ● ● ● ● ▲ ● ● ● ● ● ●
MA ●
TNMG160416-MA 1.6
TNMG220408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ●
TNMG220412-MA 1.2 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ●
TNMG220416-MA 1.6 ●
TNMG270608-MA 0.8 ● ● ▲ ●
TNMG270612-MA 1.2 ● ● ▲ ●
MH TNMG160404-MH 0.4 ● ● ▲ ▲ ●
TNMG160408-MH 0.8 ● ● ▲ ● ● ● ● ▲ ●
TNMG160412-MH 1.2 ● ● ▲ ● ● ● ● ●
123
TURNING INSERT
TN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
TNMG220408-MH 0.8 ● ● ▲ ● ● ● ● ▲ ●
C
TNMG220412-MH 1.2 ● ● ▲ ● ● ● ● ●
TNMG110304 0.4 ● ▲ ● ● ● ●
D
TNMG110308 0.8 ● ▲ ● ●
TNMG160304 0.4 ● ● ● ●
R TNMG160308 0.8 ● ▲ ● ● ●
TNMG160404 0.4 ● ● ▲ ● ● ● ● ● ● ● ● ● ● ●
S TNMG160408 0.8 ● ● ▲ ● ● ● ● ● ● ● ● ● ● ● ● ●
TNMG160412 1.2 ● ● ▲ ● ● ● ● ● ●
Standard
TNMG160416 1.6 ● ● ● ● ● ●
T
TNMG220404 0.4 ● ● ▲ ● ● ● ● ●
TNMG220408 0.8 ● ● ▲ ● ● ● ● ● ● ● ●
V TNMG220412 1.2 ● ● ▲ ● ● ● ●
TNMG220416 1.6 ● ▲ ● ● ●
W TNMG270608 0.8 ● ● ● ●
TNMG270612 1.2 ● ▲ ● ● ● ●
TNMG270616 1.6 ● ▲
TNMG330924 2.4 ●
MW TNMX160408-MW 0.8 ● ● ● ▲ ● ● ●
TNMX160412-MW 1.2 ● ● ● ▲ ● ● ● ●
TNMG160404-MS 0.4 ● ▲ ● ● ● ● ● ●
MS TNMG160408-MS 0.8 ● ▲ ▲ ● ● ● ● ● ● ● ●
TNMG160412-MS 1.2 ● ● ● ● ●
TNMG220408-MS 0.8 ● ▲ ● ● ● ● ● ●
TNMG220412-MS 1.2 ●
TNMG160404-MS 0.4 ● ● ●
MS TNMG160408-MS 0.8 ● ● ●
TNMG160412-MS 1.2 ● ● ●
TNMG220408-MS 0.8 ● ● ●
TNMG220412-MS 1.2 ● ● ●
TNMG160408-RP 0.8 ● ● ● ● ●
TNMG160412-RP 1.2 ● ● ● ● ●
RP TNMG220408-RP 0.8 ● ● ● ● ●
TNMG220412-RP 1.2 ● ● ● ● ●
TNMG220416-RP 1.6 ● ● ● ● ●
TNMG270612-RP 1.2 ● ● ● ● ●
TNMG270616-RP 1.6 ● ● ● ● ●
124
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
TNMG160408-RM 0.8 ● ● ●
C
RM ● ● ●
TNMG160412-RM 1.2
TNMG220408-RM 0.8 ● ● ●
D
TNMG220412-RM 1.2 ● ● ●
TNMG220416-RM 1.6 ● ● ●
TNMG160408-RK 0.8 ● ● R
TNMG160412-RK 1.2 ● ●
RK
TNMG160416-RK 1.6 ● ● S
TNMG220408-RK 0.8 ● ●
TNMG220412-RK 1.2 ● ●
T
TNMG220416-RK 1.6 ● ●
TNMG160408-RS 0.8 ● ●
RS
TNMG160412-RS 1.2 ● ● V
TNMG220408-RS 0.8 ● ●
TNMG220412-RS 1.2 ● ● W
TNGG110302L 0.2 ● ●
TNGG110302R 0.2 ●
TNGG110304L 0.4 ● ●
TNGG110304R 0.4 ● ●
TNGG110308L 0.8 ● ●
TNGG110308R 0.8 ●
TNGG160304L 0.4 ● ●
TNGG160304R 0.4 ● ● ●
R/L
TNGG160402L 0.2 ● ● ●
TNGG160402R 0.2 ● ● ● ● ●
TNGG160404L 0.4 ● ● ● ● ●
TNGG160404R 0.4 ● ● ● ● ● ●
TNGG160408L 0.8 ● ● ● ● ● ●
TNGG160408R 0.8 ● ● ● ● ● ●
TNGG220404L 0.4 ● ● ●
TNGG220404R 0.4 ● ● ●
TNGG220408L 0.8 ● ● ●
TNGG220408R 0.8 ● ● ●
TNMG160408-GH 0.8 ● ● ▲ ▲ ● ● ●
GH ● ● ●
TNMG160412-GH 1.2
TNMG220408-GH 0.8 ● ● ▲ ● ●
TNMG220412-GH 1.2 ● ● ▲ ● ● ●
TNMG220416-GH 1.6 ● ●
125
TURNING INSERT
TN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
TNMG270612-GH 1.2 ● ● ▲ ●
C
TNMG270616-GH 1.6 ● ●
TNMM160408-HZ 0.8 ● ▲ ● ●
D
HZ TNMM160412-HZ 1.2 ● ●
TNMM220408-HZ 0.8 ● ▲
R TNMM220412-HZ 1.2 ● ▲
TNMM220416-HZ 1.6 ● ▲
S TNGA110304 0.4 ●
TNGA110308 0.8 ● ●
Flat Top TNGA160402 0.2 ● ●
T
TNGA160404 0.4 ● ● ●
TNGA160408 0.8 ● ●
V TNGA220404 0.4 ●
TNGA220408 0.8 ●
W TNMA160404 0.4 ● ● ● ● ● ●
TNMA160408 0.8 ● ● ● ● ● ● ●
TNMA160412 1.2 ● ● ● ●
Flat Top TNMA160416 1.6 ● ● ●
TNMA160420 2 ● ●
TNMA220404 0.4 ●
TNMA220408 0.8 ● ● ● ● ● ● ●
TNMA220412 1.2 ● ● ● ●
TNMA220416 1.6 ● ● ● ● ●
TNMM160408-HL 0.8 ● ● ●
HL TNMM160412-HL 1.2 ● ● ●
TNMM220408-HL 0.8 ● ● ●
TNMM220412-HL 1.2 ● ● ●
TNMM220416-HL 1.6 ● ● ●
TNMG160404L-ES 0.4 ▲ ●
TNMG160404R-ES 0.4 ▲ ●
R/L-ES
TNMG160408L-ES 0.8 ▲ ●
TNMG160408R-ES 0.8 ▲ ●
TNMG220408L-ES 0.8 ●
TNMG220408R-ES 0.8 ●
TNGG160402L-K 0.2 ● ● ●
R/L-K
TNGG160402R-K 0.2 ● ● ●
TNGG160404L-K 0.4 ● ●
TNGG160404R-K 0.4 ● ● ●
126
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
TNGG160408L-K 0.8 ●
C
TNGG160408R-K 0.8 ●
127
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 404
Product Information TOOLS) >> 314 GRADES >> 58
35°
IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
VNMG160402-FP 0.2 ● ● ● ●
FP
VNMG160404-FP 0.4 ● ● ● ●
R
VNMG160408-FP 0.8 ● ● ● ●
VNMG160402-FH 0.2 ● ▲ ● ● ●
FH
S VNMG160404-FH 0.4 ● ▲ ● ● ●
VNMG160408-FH 0.8 ● ▲ ● ● ● ●
FS VNMG160404-FS 0.4 ▲ ●
T
VNMG160408-FS 0.8 ▲ ●
VNGG160401-FJ 0.1 ● ●
FJ
V VNGG160402-FJ 0.2 ● ●
VNGG1604V5-FJ 0.05 ● ●
VNGG160402L-F 0.2 ● ● ● ●
W R/L-F VNGG160402R-F 0.2 ● ● ● ●
VNGG160404L-F 0.4 ● ● ● ●
VNGG160404R-F 0.4 ● ● ● ●
LP VNMG160404-LP 0.4 ● ● ● ● ● ●
VNMG160408-LP 0.8 ● ● ● ● ● ●
LM VNMG160404-LM 0.4 ● ● ●
VNMG160408-LM 0.8 ● ● ●
LK VNMG160404-LK 0.4 ● ●
VNMG160408-LK 0.8 ● ●
LS VNMG160404-LS 0.4 ● ● ●
VNMG160408-LS 0.8 ● ● ●
SH VNMG160404-SH 0.4 ● ● ▲ ● ● ● ● ●
VNMG160408-SH 0.8 ● ● ▲ ● ● ● ● ●
SA VNMG160404-SA 0.4 ● ● ●
VNMG160408-SA 0.8 ● ● ●
MJ VNGM160404-MJ 0.4 ● ●
VNGM160408-MJ 0.8 ● ●
VNMG160404-MJ 0.4 ● ● ● ●
MJ
VNMG160408-MJ 0.8 ● ● ● ●
VNMG160412-MJ 1.2 ● ● ●
MP VNMG160404-MP 0.4 ● ● ▲ ● ● ● ● ●
VNMG160408-MP 0.8 ● ● ▲ ● ● ● ● ●
VNMG160412-MP 1.2 ● ● ▲ ● ● ● ●
128
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
MM
C
VNMG160408-MM 0.8 ● ● ●
VNMG160404-MK 0.4 ● ●
MK D
VNMG160408-MK 0.8 ● ●
VNMG160412-MK 1.2 ● ●
VNMG160404-GK 0.4 ● ●
GK R
VNMG160408-GK 0.8 ● ●
VNMG160412-GK 1.2 ● ●
GM VNMG160404-GM 0.4 ● ● ● S
VNMG160408-GM 0.8 ● ● ●
MA VNMG160404-MA 0.4 ● ● ▲ ● ● ● ● ▲ ● ● ● ● ● ●
T
VNMG160408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ●
MH VNMG160404-MH 0.4 ● ● ▲ ●
V
VNMG160408-MH 0.8 ● ● ▲ ● ● ● ▲ ●
● ● ▲ ● ● ● ● ● ● ● ● ● ●
Standard VNMG160404 0.4
W
VNMG160408 0.8 ● ● ▲ ● ● ● ● ● ● ● ● ● ● ●
VNMG160412 1.2 ● ● ● ● ● ● ● ●
MS VNMG160404-MS 0.4 ● ▲ ● ● ● ● ●
VNMG160408-MS 0.8 ● ▲ ● ● ● ● ● ●
MS VNMG160404-MS 0.4 ● ● ●
VNMG160408-MS 0.8 ● ● ●
VNGG160404R 0.4 ● ● ● ●
VNGA160408 0.8 ● ●
129
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 444
Product Information 80°
TOOLS) >> 320 GRADES >> 58
IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
FP WNMG080402-FP 0.2 ● ● ● ●
WNMG080404-FP 0.4 ● ● ● ●
R
WNMG080408-FP 0.8 ● ● ● ●
S FH WNMG080404-FH 0.4 ● ● ●
WNMG080408-FH 0.8 ● ● ● ●
T
FS WNMG080404-FS 0.4 ▲ ●
V
WNMG080408-FS 0.8 ▲ ●
W FY WNMG080404-FY 0.4 ● ●
WNMG080408-FY 0.8 ▲ ● ● ●
WNMG060404-LP 0.4 ● ● ● ● ● ●
WNMG060408-LP 0.8 ● ● ● ● ● ●
LP
WNMG06T304-LP 0.4 ● ● ● ● ● ●
WNMG06T308-LP 0.8 ● ● ● ● ● ●
WNMG080404-LP 0.4 ● ● ● ● ● ●
WNMG080408-LP 0.8 ● ● ● ● ● ●
WNMG080412-LP 1.2 ● ● ● ● ●
LM WNMG060404-LM 0.4 ● ● ●
WNMG060408-LM 0.8 ● ● ●
WNMG080404-LM 0.4 ● ● ●
WNMG080408-LM 0.8 ● ● ●
LK WNMG080404-LK 0.4 ● ●
WNMG080408-LK 0.8 ● ●
WNMG080412-LK 1.2 ● ●
LS WNMG080404-LS 0.4 ● ● ●
WNMG080408-LS 0.8 ● ● ●
WNMG060404-SH 0.4 ● ● ●
SH
WNMG060408-SH 0.8 ● ● ●
WNMG06T304-SH 0.4 ● ● ●
WNMG06T308-SH 0.8 ● ● ●
WNMG080404-SH 0.4 ● ● ● ● ● ● ●
130
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
WNMG080408-SH 0.8 ● ● ▲ ● ● ● ● ●
C
WNMG080412-SH 1.2 ● ● ▲ ● ● ● ●
SA WNMG080404-SA 0.4 ● ● ▲ ● ● ● ●
WNMG080408-SA 0.8 ● ● ▲ ● ● ● ● D
WNMG080412-SA 1.2 ● ● ▲ ● ● ●
WNMG060404-SW 0.4 ● ● ● ▲ ● ● R
SW
WNMG060408-SW 0.8 ● ● ● ▲ ● ●
WNMG080404-SW 0.4 ● ● ● ▲ ● ● ● ● ● ●
S
WNMG080408-SW 0.8 ● ● ● ▲ ● ● ● ● ● ●
WNMG080412-SW 1.2 ● ● ● ▲ ● ● ●
SY WNMG080404-SY 0.4 ● ● T
WNMG080408-SY 0.8 ▲ ● ● ● ●
V
C WNMG080404-C 0.4 ▲ ▲
▲
W
WNMG080408-C 0.8
MJ WNMG080408-MJ 0.8 ● ● ●
WNMG080412-MJ 1.2 ● ● ●
WNMG080416-MJ 1.6 ● ● ●
WNMG060404-MP 0.4 ● ● ▲ ● ● ● ●
WNMG060408-MP 0.8 ● ● ▲ ● ● ● ●
WNMG060412-MP 1.2 ● ● ▲ ● ● ● ●
MP WNMG06T304-MP 0.4 ● ● ▲ ● ● ● ●
WNMG06T308-MP 0.8 ● ● ▲ ● ● ● ●
WNMG06T312-MP 1.2 ● ● ▲ ● ● ● ●
WNMG080404-MP 0.4 ● ● ▲ ● ● ● ● ●
WNMG080408-MP 0.8 ● ● ▲ ● ● ● ● ●
WNMG080412-MP 1.2 ● ● ▲ ● ● ● ● ●
WNMG080416-MP 1.6 ● ● ▲ ● ● ● ●
MM WNMG060408-MM 0.8 ● ● ●
WNMG060412-MM 1.2 ● ● ●
WNMG080408-MM 0.8 ● ● ●
WNMG080412-MM 1.2 ● ● ●
MK WNMG080404-MK 0.4 ● ●
WNMG080408-MK 0.8 ● ●
WNMG080412-MK 1.2 ● ●
WNMG080416-MK 1.6 ● ●
GK WNMG060404-GK 0.4 ● ●
WNMG060408-GK 0.8 ● ●
WNMG080404-GK 0.4 ● ●
131
TURNING INSERT
WN**
TURNING INSERT
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
WNMG080408-GK 0.8 ● ●
C
WNMG080412-GK 1.2 ● ●
WNMG060404-GM 0.4 ● ● ●
GM
D WNMG060408-GM 0.8 ● ● ●
WNMG080404-GM 0.4 ● ● ●
WNMG080408-GM 0.8 ● ● ●
R WNMG080412-GM 1.2 ● ● ●
WNMG060404-MA 0.4 ● ● ● ● ●
WNMG060408-MA 0.8 ● ● ● ● ● ● ● ● ● ●
S
WNMG060412-MA 1.2 ● ● ● ● ● ● ● ● ● ●
WNMG06T304-MA 0.4 ● ● ●
MA
T WNMG06T308-MA 0.8 ● ● ●
WNMG06T312-MA 1.2 ● ● ●
WNMG080404-MA 0.4 ● ● ▲ ● ● ● ● ▲ ● ● ● ● ● ●
V WNMG080408-MA 0.8 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ●
WNMG080412-MA 1.2 ● ● ▲ ● ● ● ● ● ● ▲ ● ● ● ● ● ● ●
WNMG080416-MA 1.6 ● ● ●
W
WNMG100612-MA 1.2 ▲ ●
MH WNMG080404-MH 0.4 ● ● ▲
WNMG080408-MH 0.8 ● ● ▲ ● ● ● ● ▲ ●
WNMG080412-MH 1.2 ● ● ▲ ● ● ● ● ●
WNMG080412-MW 1.2 ● ● ● ● ▲ ● ● ● ●
WNMG060404-MS 0.4 ● ▲ ●
WNMG060408-MS 0.8 ● ▲ ●
MS
WNMG06T304-MS 0.4 ● ▲ ●
WNMG06T308-MS 0.8 ● ▲ ●
WNMG080404-MS 0.4 ● ▲ ▲ ●
WNMG080408-MS 0.8 ● ▲ ▲ ● ● ● ● ● ●
WNMG080412-MS 1.2 ● ● ● ● ●
MS WNMG080404-MS 0.4 ● ● ●
WNMG080408-MS 0.8 ● ● ●
WNMG080412-MS 1.2 ● ● ●
132
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC6035
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
HTi05T
AP25N
VP25N
US735
US905
Order Number
HTi10
Shape (mm)
WITH
HOLE
RP WNMG080408-RP 0.8 ● ● ● ● ●
C
WNMG080412-RP 1.2 ● ● ● ● ●
D
RM WNMG060408-RM 0.8 ● ● ●
WNMG060412-RM 1.2 ● ● ●
R
WNMG080408-RM 0.8 ● ● ●
WNMG080412-RM 1.2 ● ● ●
RK WNMG080408-RK 0.8 ● ● S
WNMG080412-RK 1.2 ● ●
WNMG080416-RK 1.6 ● ●
T
RS WNMG080408-RS 0.8 ● ●
WNMG080412-RS 1.2 ● ●
V
WNMG080416-RS 1.6 ● ●
WNMG100612-RS 1.2 ● ●
GH WNMG080408-GH 0.8 ● ● ▲ ▲ ● ● ●
W
WNMG080412-GH 1.2 ● ● ▲ ● ● ●
GJ WNMG080408-GJ 0.8 ● ● ●
WNMG080412-GJ 1.2 ● ● ●
WNMG080416-GJ 1.6 ● ● ●
WNMG100612-GJ 1.2 ● ●
WNMA060408 0.8 ● ●
Flat Top WNMA060412 1.2 ● ●
WNMA080404 0.4 ● ● ● ● ●
WNMA080408 0.8 ● ● ● ● ●
WNMA080412 1.2 ● ● ● ●
WNMA080416 1.6 ● ● ●
133
TURNING INSERT
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
AP25N
VP25N
US735
US905
HTi05t
Order Number
HTi10
Shape (mm)
134
TURNING INSERT
SN** SQUARE
TURNING INSERT
IDENTIFICATION >> 30 GRADES >> 58
Product Information TECHNICAL INFO >> 1971 SUITABLE GRADE, CHIPBREAKER >> 38
90°
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
AP25N
VP25N
US735
US905
HTi05t
Order Number
HTi10
Shape (mm)
SNGN120408 0.8 ●
135
TURNING INSERT
MC7015
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MP3025
UH6400
UC5105
VP15TF
MT9015
UE6105
UE6020
UE6035
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
UP20M
UTi20T
AP25N
VP25N
US735
US905
HTi05t
Order Number
HTi10
Shape (mm)
S TNMN160308 0.8 ●
TNMN160408 0.8 ● ● ● ● ●
Flat Top
TNMN160412 1.2 ● ● ● ●
T TNMN160416 1.6 ● ● ● ●
TNMN160420 2 ●
TNMN220408 0.8 ●
V
TNMN220412 1.2 ●
136
Memo
Memo
137
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (SMALL TOOLS) >> 350
Product Information TOOLS) >> 322 IDENTIFICATION >> 30
80° APPLICABLE HOLDER PAGE (BORING BARS) >> 386 TECHNICAL INFO >> 1971
GRADES >> 58
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
CCMT060202-FP 0.2 ● ● ● ● ●
FP
CCMT060204-FP 0.4 ● ● ● ● ●
R
CCMT09T302-FP 0.2 ● ● ● ● ●
CCMT09T304-FP 0.4 ● ● ● ● ●
S CCMT09T308-FP 0.8 ● ● ● ● ●
CCGT060201M-FS 0.08 ● ●
FS
CCGT060202M-FS 0.18 ● ●
T CCGT09T301M-FS 0.08 ● ●
CCGT09T302M-FS 0.18 ● ●
CCGT09T304M-FS 0.38 ● ●
V
CCGT060201M-FS-P 0.08 ●
FS-P
CCGT060202M-FS-P 0.18 ●
W CCGT09T301M-FS-P 0.08 ●
CCGT09T302M-FS-P 0.18 ●
CCGT09T304M-FS-P 0.38 ●
X CCMT060202-FM 0.2 ●
FM
CCMT060204-FM 0.4 ●
CCMT09T302-FM 0.2 ●
CCMT09T304-FM 0.4 ●
CCMT09T308-FM 0.8 ●
CCMT060202-FV 0.2 ▲ ● ● ● ● ●
FV ▲ ● ● ● ● ●
CCMT060204-FV 0.4
CCMT09T302-FV 0.2 ▲ ● ● ●
CCMT09T304-FV 0.4 ▲ ● ● ● ●
CCMT09T308-FV 0.8 ▲ ● ● ● ●
CCGT060201-FJ 0.1 ●
CCGT060202-FJ 0.2 ●
FJ
CCGT0602V5-FJ 0.05 ●
CCGT09T301-FJ 0.1 ● ●
CCGT09T302-FJ 0.2 ● ●
CCGT09T304-FJ 0.4 ● ●
CCGT09T3V5-FJ 0.05 ●
CCGT060202-AZ 0.2 ●
CCGT060204-AZ 0.4 ●
AZ CCGT09T302-AZ 0.2 ●
CCGT09T304-AZ 0.4 ●
CCGT09T308-AZ 0.8 ●
CCGT120402-AZ 0.2 ●
CCGT120404-AZ 0.4 ●
CCGT120408-AZ 0.8 ●
138
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
CCGT03S101L-F 0.1 ● ●
C
CCGT03S102L-F 0.2 ● ● ●
CCGT04T0V3L-F 0.03 ● ●
LM CCMT060204-LM 0.4 ● ● ●
W
CCMT060208-LM 0.8 ● ● ●
CCMT09T304-LM 0.4 ● ● ●
CCMT09T308-LM 0.8 ● ● ● X
CCGT060201M-LS 0.08 ● ●
LS
CCGT060202M-LS 0.18 ● ●
CCGT09T301M-LS 0.08 ● ●
CCGT09T302M-LS 0.18 ● ●
CCGT09T304M-LS 0.38 ● ●
CCGT060201M-LS-P 0.08 ●
LS-P
CCGT060202M-LS-P 0.18 ●
CCGT09T301M-LS-P 0.08 ●
CCGT09T302M-LS-P 0.18 ●
CCGT09T304M-LS-P 0.38 ●
SV CCMH060202-SV 0.2 ▲ ● ▲ ● ● ● ● ● ●
CCMH060204-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
SW CCMT060202-SW 0.2 ● ▲ ● ● ▲ ● ● ●
CCMT060204-SW 0.4 ● ▲ ● ● ▲ ● ● ● ●
CCMT09T302-SW 0.2 ● ▲ ● ● ▲ ● ● ● ●
CCMT09T304-SW 0.4 ● ▲ ● ● ▲ ● ● ● ●
CCGT060201L-SS 0.1 ●
CCGT060201MR-SS 0.1 ●
R/L-SS
CCGT060201R-SS 0.1 ●
CCGT060202L-SS 0.2 ●
CCGT060202MR-SS 0.2 ●
CCGT060202R-SS 0.2 ●
CCGT0602V3L-SS 0.03 ●
139
TURNING INSERT
CC**
TURNING INSERT
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
CCGT0602V3R-SS 0.03 ●
C
CCGT09T301L-SS 0.1 ●
CCGT09T301MR-SS 0.1 ●
D CCGT09T301R-SS 0.1 ●
CCGT09T302L-SS 0.2 ●
CCGT09T302MR-SS 0.2 ●
R CCGT09T302R-SS 0.2 ●
CCGT09T304MR-SS 0.4 ●
CCGT09T3V3L-SS 0.03 ●
S
CCGT09T3V3R-SS 0.03 ●
CCMT060204-MP 0.4 ● ● ● ● ●
T CCMT060208-MP 0.8 ● ● ● ● ●
MP
CCMT09T304-MP 0.4 ● ● ● ● ●
CCMT09T308-MP 0.8 ● ● ● ● ●
V CCMT120404-MP 0.4 ● ● ● ● ●
CCMT120408-MP 0.8 ● ● ● ● ●
CCMT120412-MP 1.2 ● ● ● ● ●
W
CCMT060204-MM 0.4 ● ● ●
CCMT060208-MM 0.8 ● ● ●
MM
CCMT09T304-MM 0.4 ● ● ●
X
CCMT09T308-MM 0.8 ● ● ●
CCMT120404-MM 0.4 ● ● ●
CCMT120408-MM 0.8 ● ● ●
CCMT120412-MM 1.2 ● ● ●
CCMT060204-MK 0.4 ● ●
CCMT060208-MK 0.8 ● ●
MK
CCMT09T304-MK 0.4 ● ●
CCMT09T308-MK 0.8 ● ●
CCMT120404-MK 0.4 ● ●
CCMT120408-MK 0.8 ● ●
CCMT120412-MK 1.2 ● ●
CCMT060202 0.2 ● ▲ ● ● ● ● ● ●
CCMT060204 0.4 ● ● ▲ ● ● ● ● ● ● ● ●
CCMT060208 0.8 ● ▲ ● ● ● ● ●
CCMT080302 0.2 ●
140
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
MV CCMH060202-MV 0.2 ▲ ● ▲ ● ● ● ● ● ● ●
C
CCMH060204-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
D
CCMT060204-MW 0.2 ▲ ● ● ▲ ● ● ●
MW CCMT060208-MW 0.8 ● ▲ ● ● ▲ ● ● ●
CCMT09T304-MW 0.4 ● ▲ ● ● ▲ ● ● ● R
CCMT09T308-MW 0.8 ● ▲ ● ● ▲ ● ● ●
CCMT120404-MW 0.4 ● ▲ ● ● ▲ ● ● ●
CCMT120408-MW 0.8 ● ▲ ● ● ▲ ● ● ● S
CCET060201L-SR 0.1 ● ● ●
CCET060201R-SR 0.1 ● ● ●
T
CCET060202L-SR 0.2 ● ● ●
CCET060202R-SR 0.2 ● ● ●
CCET060204L-SR 0.4 ● ● ● V
CCET060204R-SR 0.4 ● ● ●
R/L-SR CCET0602V3L-SR 0.03 ● ● ●
CCET0602V3R-SR 0.03 ● ● ● W
CCET09T301L-SR 0.1 ● ● ●
CCET09T301R-SR 0.1 ● ● ●
X
CCET09T302L-SR 0.2 ● ● ●
CCET09T302R-SR 0.2 ● ● ●
CCET09T304L-SR 0.4 ● ● ●
CCET09T304R-SR 0.4 ● ● ●
CCET09T3V3L-SR 0.03 ● ● ●
CCET09T3V3R-SR 0.03 ● ● ●
CCET060200L-SN 0 ● ● ●
CCET060200R-SN 0 ● ● ●
CCET060201L-SN 0.1 ● ● ●
CCET060201R-SN 0.1 ● ● ●
CCET060202L-SN 0.2 ● ● ●
CCET060202R-SN 0.2 ● ● ●
CCET060204L-SN 0.4 ● ● ●
CCET060204R-SN 0.4 ● ● ●
R/L-SN
CCET0602V3L-SN 0.03 ● ● ●
CCET0602V3R-SN 0.03 ● ● ●
CCET09T300L-SN 0 ● ● ●
CCET09T300R-SN 0 ● ● ●
CCET09T301L-SN 0.1 ● ● ●
CCET09T301R-SN 0.1 ● ● ●
CCET09T302L-SN 0.2 ● ● ●
CCET09T302R-SN 0.2 ● ● ●
CCET09T304L-SN 0.4 ● ● ●
CCET09T304R-SN 0.4 ● ● ●
CCET09T3V3L-SN 0.03 ● ● ●
141
TURNING INSERT
CC**
TURNING INSERT
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
CCET09T3V3R-SN 0.03 ● ● ●
C
CCGT060201L-SN 0.1 ●
CCGT060201MR-SN 0.1 ●
D CCGT060201R-SN 0.1 ●
CCGT060202L-SN 0.2 ●
CCGT060202MR-SN 0.2 ●
R CCGT060202R-SN 0.2 ●
CCGT0602V3R-SN 0.03 ●
R/L-SN CCGT09T301L-SN 0.1 ●
S
CCGT09T301MR-SN 0.1 ●
CCGT09T301R-SN 0.1 ●
T CCGT09T302L-SN 0.2 ●
CCGT09T302MR-SN 0.2 ●
CCGT09T302R-SN 0.2 ●
V CCGT09T304L-SN 0.4 ●
CCGT09T304MR-SN 0.4 ●
CCGT09T304R-SN 0.4 ●
W
CCGT09T3V3L-SN 0.03 ●
CCGT09T3V3R-SN 0.03 ●
CCGT060201M-SMG 0.1 ●
SMG CCGT060202M-SMG 0.2 ● ●
CCGT060204M-SMG 0.4 ● ●
CCGT09T301M-SMG 0.1 ●
CCGT09T302M-SMG 0.2 ●
CCGT09T304M-SMG 0.4 ●
CCGW060200 0 ●
CCGW060202E 0.2 ●
Flat Top
CCGW060204E 0.4 ●
CCGW060208E 0.8 ●
CCGW0602V5 0.05 ●
CCGW09T300 0 ●
CCGW09T3V5 0.05 ●
CCMW060202 0.2 ●
CCMW060204 0.4 ● ● ● ● ● ●
142
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
CCMW120412 1.2 ● ● ●
C
143
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
CPMH080202-FV 0.2 ▲ ● ● ● ●
FV
CPMH080204-FV 0.4 ▲ ● ● ● ●
R
CPMH090302-FV 0.2 ▲ ● ● ● ●
CPMH090304-FV 0.4 ▲ ● ● ● ●
S CPMH090308-FV 0.8 ▲ ● ● ● ●
CPGT080204L-F 0.4 ●
W CPMH080204R-F 0.4 ● ● ●
CPMH090304L-F 0.4 ● ● ● ●
CPMH090304R-F 0.4 ● ● ●
X CPMH080202-SV 0.2 ▲ ● ▲ ● ● ● ● ● ●
SV
CPMH080204-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
CPMH090302-SV 0.2 ▲ ● ▲ ● ● ● ● ● ●
CPMH090304-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
CPMH090308-SV 0.8 ▲ ● ▲ ● ● ● ● ● ●
MV CPMH080204-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
CPMH080208-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ● ●
CPMH090304-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
CPMH090308-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ● ●
144
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (SMALL TOOLS) >> 352
Product Information TOOLS) >> 323 IDENTIFICATION >> 30
55° APPLICABLE HOLDER PAGE (BORING BARS) >> 390 TECHNICAL INFO >> 1971
GRADES >> 58
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
DCMT070202-FP 0.2 ● ● ● ● ●
FP DCMT070204-FP 0.4 ● ● ● ● ●
R
DCMT11T302-FP 0.2 ● ● ● ● ●
DCMT11T304-FP 0.4 ● ● ● ● ●
DCMT11T308-FP 0.8 ● ● ● ● ● S
DCGT070201M-FS 0.08 ● ●
FS
DCGT070202M-FS 0.18 ● ●
DCGT11T301M-FS 0.08 ● ● T
DCGT11T302M-FS 0.18 ● ●
DCGT070201M-FS-P 0.08 ●
FS-P V
DCGT070202M-FS-P 0.18 ●
DCGT11T301M-FS-P 0.08 ●
DCGT11T302M-FS-P 0.18 ● W
DCMT070202-FM 0.2 ●
FM DCMT070204-FM 0.4 ●
DCMT11T302-FM 0.2 ● X
DCMT11T304-FM 0.4 ●
DCMT11T308-FM 0.8 ●
DCMT070202-FV 0.2 ● ▲ ● ● ● ●
DCMT070204-FV 0.4 ● ▲ ● ● ● ●
FV
DCMT070208-FV 0.8 ▲ ● ● ●
DCMT11T302-FV 0.2 ▲ ● ● ●
DCMT11T304-FV 0.4 ● ▲ ● ● ● ●
DCMT11T308-FV 0.8 ● ▲ ● ● ● ●
DCGT070202-AZ 0.2 ●
AZ DCGT070204-AZ 0.4 ●
DCGT11T302-AZ 0.2 ●
DCGT11T304-AZ 0.4 ●
DCGT11T308-AZ 0.8 ●
DCGT070202L-F 0.2 ● ● ● ●
DCGT070202R-F 0.2 ● ● ●
DCGT070204L-F 0.4 ● ● ● ●
R/L-F
DCGT070204R-F 0.4 ● ● ●
DCGT11T302L-F 0.2 ● ● ● ●
DCGT11T302R-F 0.2 ● ● ●
DCGT11T304L-F 0.4 ● ● ● ●
DCGT11T304R-F 0.4 ● ● ●
LP DCMT070204-LP 0.4 ● ● ● ● ●
DCMT070208-LP 0.8 ● ● ● ● ●
DCMT11T304-LP 0.4 ● ● ● ● ●
145
TURNING INSERT
DC**
TURNING INSERT
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
DCMT11T308-LP 0.8 ● ● ● ● ●
C
DCMT070204-LM 0.4 ● ● ●
LM
DCMT070208-LM 0.8 ● ● ●
D DCMT11T304-LM 0.4 ● ● ●
DCMT11T308-LM 0.8 ● ● ●
DCGT070201M-LS 0.08 ● ●
R ● ●
DCGT070202M-LS 0.18
LS
DCGT070204M-LS 0.38 ● ●
DCGT11T301M-LS 0.08 ● ●
S
DCGT11T302M-LS 0.18 ● ●
DCGT11T304M-LS 0.38 ● ●
T DCGT070201M-LS-P 0.08 ●
DCGT070202M-LS-P 0.18 ●
LS-P
DCGT070204M-LS-P 0.38 ●
V DCGT11T301M-LS-P 0.08 ●
DCGT11T302M-LS-P 0.18 ●
DCGT11T304M-LS-P 0.38 ●
W
DCMT070202-SV 0.2 ▲ ▲ ● ● ● ● ●
DCMT070204-SV 0.4 ● ▲ ▲ ● ● ● ● ●
SV
X DCMT070208-SV 0.8 ● ▲ ▲ ● ● ● ● ●
DCMT11T302-SV 0.2 ● ▲ ▲ ● ● ● ● ●
DCMT11T304-SV 0.4 ● ▲ ▲ ● ● ● ● ●
DCMT11T308-SV 0.8 ● ▲ ▲ ● ● ● ● ●
DCGT070201L-SS 0.1 ●
DCGT070201MR-SS 0.1 ●
DCGT070201R-SS 0.1 ●
DCGT070202L-SS 0.2 ●
DCGT070202MR-SS 0.2 ●
DCGT070202R-SS 0.2 ●
R/L-SS
DCGT0702V3L-SS 0.03 ●
DCGT0702V3R-SS 0.03 ●
DCGT11T301MR-SS 0.1 ●
DCGT11T301R-SS 0.1 ●
DCGT11T302MR-SS 0.2 ●
DCGT11T302R-SS 0.2 ●
DCGT11T304MR-SS 0.4 ●
DCGT11T3V3R-SS 0.03 ●
DCMT070204-MP 0.4 ● ● ● ● ●
DCMT070208-MP 0.8 ● ● ● ● ●
MP
DCMT11T304-MP 0.4 ● ● ● ● ●
DCMT11T308-MP 0.8 ● ● ● ● ●
DCMT150404-MP 0.4 ● ● ● ● ●
DCMT150408-MP 0.8 ● ● ● ● ●
146
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
DCMT070204-MM 0.4 ● ● ●
C
DCMT070208-MM 0.8 ● ● ●
MM
DCMT11T304-MM 0.4 ● ● ●
DCMT11T308-MM 0.8 ● ● ● D
DCMT150404-MM 0.4 ● ● ●
DCMT150408-MM 0.8 ● ● ●
DCMT070204-MK 0.4 ● ● R
DCMT070208-MK 0.8 ● ●
MK
DCMT11T304-MK 0.4 ● ●
S
DCMT11T308-MK 0.8 ● ●
DCMT150404-MK 0.4 ● ●
DCMT150408-MK 0.8 ● ● T
DCMT070202 0.2 ● ▲ ● ● ● ● ● ●
DCMT070204 0.4 ● ● ▲ ● ● ● ● ● ● ● ●
DCMT070208 0.8 ● ● ● ● ● ● ● V
DCMT11T302 0.2 ● ▲ ● ● ● ● ● ●
Standard
DCMT11T304 0.4 ● ● ▲ ● ● ● ● ● ● ● ●
W
DCMT11T308 0.8 ● ● ▲ ● ● ● ● ● ● ● ●
DCMT11T312 1.2 ●
DCMT150404 0.4 ● ▲ ● ● ● ● ● ● ●
X
DCMT150408 0.8 ● ▲ ● ● ● ● ● ●
DCMT150412 1.2 ●
DCMT070202-MV 0.2 ● ▲ ● ▲ ● ● ● ● ● ● ●
DCMT070204-MV 0.4 ● ▲ ● ▲ ● ● ● ● ● ● ● ●
MV
DCMT070208-MV 0.8 ● ▲ ● ▲ ● ● ● ● ● ● ● ●
DCMT11T302-MV 0.2 ● ▲ ● ▲ ● ● ● ● ● ● ●
DCMT11T304-MV 0.4 ● ▲ ● ▲ ● ● ● ● ● ● ● ●
DCMT11T308-MV 0.8 ● ▲ ● ▲ ● ● ● ● ● ● ● ●
DCET070201L-SR 0.1 ● ● ●
DCET070201R-SR 0.1 ● ● ●
DCET070202L-SR 0.2 ● ● ●
DCET070202R-SR 0.2 ● ● ●
DCET070204L-SR 0.4 ● ● ●
DCET070204R-SR 0.4 ● ● ●
DCET0702V3L-SR 0.03 ● ● ●
R/L-SR
DCET0702V3R-SR 0.03 ● ● ●
DCET11T301L-SR 0.1 ● ● ●
DCET11T301R-SR 0.1 ● ● ●
DCET11T302L-SR 0.2 ● ● ●
DCET11T302R-SR 0.2 ● ● ●
DCET11T304L-SR 0.4 ● ● ●
DCET11T304R-SR 0.4 ● ● ●
DCET11T3V3L-SR 0.03 ● ● ●
DCET11T3V3R-SR 0.03 ● ● ●
147
TURNING INSERT
DC**
TURNING INSERT
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
DCET070200L-SN 0 ● ● ●
C
DCET070200R-SN 0 ● ● ●
DCET070201L-SN 0.1 ● ● ●
D DCET070201R-SN 0.1 ● ● ●
DCET070202L-SN 0.2 ● ● ●
DCET070202R-SN 0.2 ● ● ●
R DCET070204L-SN 0.4 ● ● ●
DCET070204R-SN 0.4 ● ● ●
DCET0702V3L-SN 0.03 ● ● ●
S R/L-SN
DCET0702V3R-SN 0.03 ● ● ●
DCET11T300L-SN 0 ● ● ●
T DCET11T300R-SN 0 ● ● ●
DCET11T301L-SN 0.1 ● ● ●
DCET11T301R-SN 0.1 ● ● ●
V DCET11T302L-SN 0.2 ● ● ●
DCET11T302R-SN 0.2 ● ● ●
DCET11T304L-SN 0.4 ● ● ●
W
DCET11T304R-SN 0.4 ● ● ●
DCET11T3V3L-SN 0.03 ● ● ●
DCET11T3V3R-SN 0.03 ● ● ●
X
DCGT070201MR-SN 0.1 ●
DCGT070201R-SN 0.1 ●
DCGT070202L-SN 0.2 ●
DCGT070202MR-SN 0.2 ●
DCGT070202R-SN 0.2 ●
DCGT0702V3R-SN 0.03 ●
DCGT11T301L-SN 0.1 ●
R/L-SN DCGT11T301MR-SN 0.1 ●
DCGT11T301R-SN 0.1 ●
DCGT11T302L-SN 0.2 ●
DCGT11T302MR-SN 0.2 ●
DCGT11T302R-SN 0.2 ●
DCGT11T304L-SN 0.4 ●
DCGT11T304MR-SN 0.4 ●
DCGT11T304R-SN 0.4 ●
DCGT11T3V3L-SN 0.03 ●
DCGT11T3V3R-SN 0.03 ●
DCET0702V3LW-SN 0.03 ●
R/LW-SN
DCET0702V3RW-SN 0.03 ●
DCET11T3V3LW-SN 0.03 ●
DCET11T3V3RW-SN 0.03 ●
DCGT070201M-SMG 0.1 ●
SMG
DCGT070202M-SMG 0.2 ● ●
DCGT070204M-SMG 0.4 ● ●
DCGT11T301M-SMG 0.1 ●
148
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
DCGT11T302M-SMG 0.2 ● ●
C
DCGT11T304M-SMG 0.4 ● ●
DCGW070200 0 ●
Flat Top
DCGW0702V5 0.05 ● D
DCGW11T300 0 ●
DCGW11T3V5 0.05 ●
● ● ● ● ●
R
DCMW070204 0.4
Flat Top DCMW11T304 0.4 ● ● ● ● ● ●
DCMW11T308 0.8 ● ● ● ● ●
S
DCMW150404 0.4 ●
DCMW150408 0.8 ●
149
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
DEGX150402L-F 0.2 ●
R/L-F
DEGX150402R-F 0.2 ●
R
DEGX150404L-F 0.4 ●
DEGX150404R-F 0.4 ●
S DEGX150402L 0.2 ●
R/L
DEGX150402R 0.2 ●
DEGX150404L 0.4 ●
T DEGX150404R 0.4 ●
150
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING IDENTIFICATION >> 30
Product Information TOOLS) >> 327 TECHNICAL INFO >> 1971
GRADES >> 58
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
AZ RCGT0803M0-AZ ●
R
RCGT10T3M0-AZ ●
S
RCMX1003M0 ● ▲ ● ● ● ● ● ●
Standard RCMX1204M0 ● ● ▲ ● ● ● ● ● ● ● ● ● ●
RCMX1606M0 ● ● ▲ ● ● ● ● ● ●
T
RCMX2006M0 ● ● ▲ ● ● ●
RCMX2507M0 ● ● ▲ ●
RCMX3209M0 ● ● ▲ V
Standard RCMT0602M0 ● ● ● ● ●
W
RCMT0803M0 ● ● ● ● ● ●
RR RCMX1606M0-RR ● ▲ ● ● ● X
RCMX2006M0-RR ● ▲ ● ● ●
RCMX2507M0-RR ● ▲ ● ● ●
RCMX3209M0-RR ● ▲
151
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 434
Product Information TOOLS) >> 329 GRADES >> 58
90° IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
FP SCMT09T304-FP 0.4 ● ● ● ● ●
R
SCMT09T308-FP 0.8 ● ● ● ● ●
S FM SCMT09T304-FM 0.4 ●
SCMT09T308-FM 0.8 ●
T
FV
V
SCMT09T304-FV 0.4 ▲ ● ● ● ●
W
LP SCMT09T304-LP 0.4 ● ● ● ● ●
X SCMT09T308-LP 0.8 ● ● ● ● ●
LM SCMT09T304-LM 0.4 ● ● ●
SCMT09T308-LM 0.8 ● ● ●
MP SCMT09T304-MP 0.4 ● ● ● ● ●
SCMT09T308-MP 0.8 ● ● ● ● ●
SCMT120404-MP 0.4 ● ● ● ● ●
SCMT120408-MP 0.8 ● ● ● ● ●
MM SCMT09T304-MM 0.4 ● ● ●
SCMT09T308-MM 0.8 ● ● ●
SCMT120404-MM 0.4 ● ● ●
SCMT120408-MM 0.8 ● ● ●
MK SCMT09T304-MK 0.4 ● ●
SCMT09T308-MK 0.8 ● ●
SCMT120404-MK 0.4 ● ●
SCMT120408-MK 0.8 ● ●
SCMT09T304 0.4 ● ● ▲ ● ● ● ● ● ● ●
Standard
SCMT09T308 0.8 ● ● ▲ ● ● ● ● ● ● ●
SCMT120404 0.4 ● ● ▲ ● ● ● ● ●
SCMT120408 0.8 ● ● ▲ ● ● ● ● ● ● ●
SCMT120412 1.2 ●
152
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
SCMW120408 0.8 ● ● ● ●
D
153
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
154
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 424
Product Information 60° TOOLS) >> 330 GRADES >> 58
IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
TCMT090202-FP 0.2 ● ● ● ● ●
FP TCMT090204-FP 0.4 ● ● ● ● ●
R
TCMT110202-FP 0.2 ● ● ● ● ●
TCMT110204-FP 0.4 ● ● ● ● ●
TCMT16T304-FP 0.4 ● ● ● ● ● S
TCMT090202-FM 0.2 ●
FM TCMT090204-FM 0.4 ●
TCMT110202-FM 0.2 ● T
TCMT110204-FM 0.4 ●
TCMT16T304-FM 0.4 ●
V
FV TCMT110204-FV 0.4 ▲ ● ● ● ●
TCMT16T304-FV 0.4 ▲ ● ● ●
W
TCGT110202-AZ 0.2 ●
AZ TCGT110204-AZ 0.4 ●
X
TCGT110208-AZ 0.8 ●
TCGT16T302-AZ 0.2 ●
TCGT16T304-AZ 0.4 ●
TCGT16T308-AZ 0.8 ●
TCGT060101L-F 0.1 ● ●
TCMT090204-LP 0.4 ● ● ● ● ●
LP TCMT090208-LP 0.8 ● ● ● ● ●
TCMT110204-LP 0.4 ● ● ● ● ●
TCMT110208-LP 0.8 ● ● ● ● ●
TCMT16T304-LP 0.4 ● ● ● ● ●
TCMT16T308-LP 0.8 ● ● ● ● ●
TCMT090204-LM 0.4 ● ● ●
LM TCMT090208-LM 0.8 ● ● ●
TCMT110204-LM 0.4 ● ● ●
TCMT110208-LM 0.8 ● ● ●
TCMT16T304-LM 0.4 ● ● ●
TCMT16T308-LM 0.8 ● ● ●
155
TURNING INSERT
TC**
TURNING INSERT
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
TCMT090204-MP 0.4 ● ● ● ● ●
C
TCMT090208-MP 0.8 ● ● ● ● ●
MP TCMT110204-MP 0.4 ● ● ● ● ●
D TCMT110208-MP 0.8 ● ● ● ● ●
TCMT130304-MP 0.4 ● ● ● ● ●
TCMT16T304-MP 0.4 ● ● ● ● ●
R TCMT16T308-MP 0.8 ● ● ● ● ●
TCMT16T312-MP 1.2 ● ● ● ● ●
TCMT090204-MM 0.4 ● ● ●
S
TCMT090208-MM 0.8 ● ● ●
MM TCMT110204-MM 0.4 ● ● ●
T TCMT110208-MM 0.8 ● ● ●
TCMT130304-MM 0.4 ● ● ●
TCMT16T304-MM 0.4 ● ● ●
V TCMT16T308-MM 0.8 ● ● ●
TCMT16T312-MM 1.2 ● ● ●
TCMT110204-MK 0.4 ● ●
W MK TCMT110208-MK 0.8 ● ●
TCMT16T304-MK 0.4 ● ●
TCMT16T308-MK 0.8 ● ●
X
TCMT16T312-MK 1.2 ● ●
TCMT080204 0.4 ● ● ●
TCMT090204 0.4 ● ▲ ● ● ● ● ● ●
TCMT110202 0.2 ● ▲ ● ● ● ● ● ●
TCMW110204 0.4 ● ● ● ● ●
Flat Top ●
TCMW130304 0.4
TCMW16T304 0.4 ● ● ● ● ●
TCMW16T308 0.8 ● ● ● ● ●
TCMW16T312 1.2 ● ●
156
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 451
Product Information 60° TOOLS) >> 338 GRADES >> 58
IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
157
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
TPMH080202-FV 0.2 ▲ ● ● ● ●
TPMH080204-FV 0.4 ▲ ● ● ● ●
R
TPMH090202-FV 0.2 ▲ ● ● ● ●
FV TPMH090204-FV 0.4 ▲ ● ● ● ●
S TPMH110302-FV 0.2 ▲ ● ● ● ●
TPMH110304-FV 0.4 ▲ ● ● ● ●
TPMH110308-FV 0.8 ▲ ● ● ● ●
T TPMH160302-FV 0.2 ▲ ● ● ● ●
TPMH160304-FV 0.4 ▲ ● ● ● ●
TPMH160308-FV 0.8 ▲ ● ● ● ●
V
TPMH080202-SV 0.2 ▲ ● ▲ ● ● ● ● ●
TPMH080204-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
TPMH090202-SV 0.2 ▲ ● ▲ ● ● ● ● ●
W
SV TPMH090204-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
TPMH110302-SV 0.2 ▲ ● ▲ ● ● ● ● ● ●
X TPMH110304-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
TPMH110308-SV 0.8 ▲ ● ▲ ● ● ● ● ● ●
TPMH160302-SV 0.2 ▲ ● ▲ ● ● ● ● ● ●
TPMH160304-SV 0.4 ▲ ● ▲ ● ● ● ● ● ●
TPMH160308-SV 0.8 ▲ ● ▲ ● ● ● ● ● ●
TPGH080202L-FS 0.2 ● ● ● ● ●
TPGH080202R-FS 0.2 ● ● ●
TPGH080204L-FS 0.4 ● ● ● ● ●
TPGH080204R-FS 0.4 ● ● ●
TPGH090202L-FS 0.2 ● ● ● ● ●
TPGH090202R-FS 0.2 ● ● ●
TPMX110308 0.8 ● ● ●
158
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
TPMH080202-MV 0.2 ▲ ● ▲ ● ● ● ● ●
C
TPMH080204-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
TPMH090202-MV 0.2 ▲ ● ▲ ● ● ● ● ●
MV TPMH090204-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ● D
TPMH090208-MV 0.8 ▲ ● ● ● ● ●
TPMH110302-MV 0.2 ▲ ● ▲ ● ● ● ● ● ● ●
TPMH110304-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ● R
TPMH110308-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ● ●
TPMH160304-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
S
TPMH160308-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ● ●
TPGX080202L 0.2 ● ● ●
TPGX080202R 0.2 ● T
TPGX080204L 0.4 ● ● ● ●
TPGX080204R 0.4 ● ●
TPGX090202L 0.2 ● ● ● V
TPGX090202R 0.2 ●
R/L ● ● ● ●
TPGX090204L 0.4
W
TPGX090204R 0.4 ● ●
TPGX090208L 0.8 ● ●
TPGX090208R 0.8 ●
X
TPGX110302L 0.2 ● ● ●
TPGX110304L 0.4 ● ● ● ●
TPGX110304R 0.4 ● ● ●
TPGX110308L 0.8 ● ● ● ● ●
TPGX110308R 0.8 ● ●
R/L TPMX090204L 0.4 ●
TPMX110304L 0.4 ●
TPGX080202 0.2 ●
TPGX080204 0.4 ● ● ● ● ●
TPGX080208 0.8 ● ● ●
TPGX090202 0.2 ●
Flat Top
TPGX090204 0.4 ● ● ● ●
TPGX090208 0.8 ● ● ● ●
TPGX110302 0.2 ●
TPGX110304 0.4 ● ● ● ● ● ●
TPGX110308 0.8 ● ● ● ● ●
TPGX160304 0.4 ● ● ●
TPGX160308 0.8 ● ●
159
TURNING INSERT
APPLICABLE HOLDER PAGE (SMALL TOOLS) >> 355 APPLICABLE HOLDER PAGE (BORING BARS) >> 396
Product Information IDENTIFICATION >> 30 GRADES >> 58
35°
TECHNICAL INFO >> 1971 SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
VBMT110302-FP 0.2 ● ● ● ● ●
VBMT110304-FP 0.4 ● ● ● ● ●
R FP
VBMT110308-FP 0.8 ● ● ● ● ●
VBMT160404-FP 0.4 ● ● ● ● ●
S VBMT160408-FP 0.8 ● ● ● ● ●
VBMT110302-FM 0.2 ●
VBMT110304-FM 0.4 ●
FM
T VBMT110308-FM 0.8 ●
VBMT160404-FM 0.4 ●
VBMT160408-FM 0.8 ●
V
VBMT110304-FV 0.4 ▲ ● ● ●
FV VBMT110308-FV 0.8 ▲ ● ● ●
W VBMT160404-FV 0.4 ▲ ● ● ●
VBMT160408-FV 0.8 ▲ ● ● ●
VBGT110302L-F 0.2 ● ● ● ● ●
X VBGT110302R-F 0.2 ● ● ● ● ●
VBGT110304L-F 0.4 ● ● ● ●
R/L-F VBGT110304R-F 0.4 ● ● ● ●
VBGT160402L-F 0.2 ● ● ● ●
VBGT160402R-F 0.2 ● ● ● ●
VBGT160404L-F 0.4 ● ● ● ●
VBGT160404R-F 0.4 ● ● ● ●
VBMT110304-LP 0.4 ● ● ● ● ●
LP VBMT110308-LP 0.8 ● ● ● ● ●
VBMT160404-LP 0.4 ● ● ● ● ●
VBMT160408-LP 0.8 ● ● ● ● ●
VBMT110304-LM 0.4 ● ● ●
LM VBMT110308-LM 0.8 ● ● ●
VBMT160404-LM 0.4 ● ● ●
VBMT160408-LM 0.8 ● ● ●
VBMT110304-SV 0.4 ▲ ● ●
SV VBMT110308-SV 0.8 ▲ ● ●
VBMT160404-SV 0.4 ▲ ● ●
VBMT160408-SV 0.8 ▲ ● ●
MP VBMT160404-MP 0.4 ● ● ● ● ●
VBMT160408-MP 0.8 ● ● ● ● ●
MM VBMT160404-MM 0.4 ● ● ●
VBMT160408-MM 0.8 ● ● ●
160
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
MK VBMT160404-MK 0.4 ● ●
C
VBMT160408-MK 0.8 ● ●
VBMT110304-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
MV VBMT110308-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ● ● R
VBMT160404-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ●
VBMT160408-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ● ●
VBET110301L-SR 0.1 ● ● ● S
VBET110301R-SR 0.1 ● ● ●
VBET110302L-SR 0.2 ● ● ●
T
R/L-SR VBET110302R-SR 0.2 ● ● ●
VBET110304L-SR 0.4 ● ● ●
VBET110304R-SR 0.4 ● ● ● V
VBET1103V3L-SR 0.03 ● ● ●
VBET1103V3R-SR 0.03 ● ● ●
VBET110300L-SN 0 ● ● ● W
VBET110300R-SN 0 ● ● ●
VBET110301L-SN 0.1 ● ● ●
X
VBET110301R-SN 0.1 ● ● ●
R/L-SN VBET110302L-SN 0.2 ● ● ●
VBET110302R-SN 0.2 ● ● ●
VBET110304L-SN 0.4 ● ● ●
VBET110304R-SN 0.4 ● ● ●
VBET1103V3L-SN 0.03 ● ● ●
VBET1103V3R-SN 0.03 ● ● ●
R/LW-SN VBET1103V3LW-SN 0.03 ●
VBET1103V3RW-SN 0.03 ●
Flat Top
VBMW160408 0.8 ● ●
161
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING APPLICABLE HOLDER PAGE (BORING BARS) >> 432
Product Information TOOLS) >> 331 GRADES >> 58
35°
IDENTIFICATION >> 30 SUITABLE GRADE, CHIPBREAKER >> 38
TECHNICAL INFO >> 1971
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
VCMT110302-FP 0.2 ● ● ● ● ●
FP VCMT110304-FP 0.4 ● ● ● ● ●
R
VCMT160404-FP 0.4 ● ● ● ● ●
VCMT160408-FP 0.8 ● ● ● ● ●
S VCMT110302-FM 0.2 ●
FM VCMT110304-FM 0.4 ●
VCMT160404-FM 0.4 ●
T VCMT160408-FM 0.8 ●
VCMT080202-FV 0.2 ▲ ● ● ● ● ●
FV VCMT080204-FV 0.4 ▲ ● ● ● ● ●
V
VCMT160404-FV 0.4 ● ▲ ● ● ●
VCMT160408-FV 0.8 ● ▲ ● ● ●
W VCGT160404-AZ 0.4 ●
AZ
VCGT160408-AZ 0.8 ●
VCGT160412-AZ 1.2 ●
X VCGT080202L-F 0.2 ● ● ● ●
R/L-F VCGT080202R-F 0.2 ● ● ● ●
VCGT080204L-F 0.4 ● ● ● ●
VCGT080204R-F 0.4 ● ● ● ●
VCMT110304-LP 0.4 ● ● ● ● ●
LP VCMT110308-LP 0.8 ● ● ● ● ●
VCMT160404-LP 0.4 ● ● ● ● ●
VCMT160408-LP 0.8 ● ● ● ● ●
VCMT110304-LM 0.4 ● ● ●
LM VCMT110308-LM 0.8 ● ● ●
VCMT160404-LM 0.4 ● ● ●
VCMT160408-LM 0.8 ● ● ●
VCGT110301M-LS 0.08 ● ●
VCGT110302M-LS 0.18 ● ●
LS VCGT110304M-LS 0.38 ● ●
VCGT130301M-LS 0.08 ● ●
VCGT130302M-LS 0.18 ● ●
VCGT130304M-LS 0.38 ● ●
VCGT110301M-LS-P 0.08 ●
VCGT110302M-LS-P 0.18 ●
LS-P VCGT110304M-LS-P 0.38 ●
VCGT130301M-LS-P 0.08 ●
VCGT130302M-LS-P 0.18 ●
VCGT130304M-LS-P 0.38 ●
162
TURNING INSERT
TURNING INSERT
Stock status (10 inserts in one case)
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
P Steel
M Stainless steel
Work Material K Cast iron
N Non-Ferrous Metal
S Heat-resistant Alloy, Titanium Alloy
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITH
HOLE
SV VCMT080202-SV 0.2 ▲ ● ● ● ●
C
VCMT080204-SV 0.4 ▲ ● ● ● ●
VCMT160404-MP 0.4 ● ● ● ● ●
MP
● ● ● ● ●
D
VCMT160408-MP 0.8
VCMT160412-MP 1.2 ● ● ● ● ●
VCMT160404-MM 0.4 ● ● ●
MM R
VCMT160408-MM 0.8 ● ● ●
VCMT160412-MM 1.2 ● ● ●
MK VCMT160404-MK 0.4 ● ● S
VCMT160408-MK 0.8 ● ●
VCMT110304 0.4 ● ▲ ● ● ● ● ● ● ● ● T
Standard VCMT160404 0.4 ● ● ▲ ● ● ● ● ● ● ● ● ●
VCMT160408 0.8 ● ● ▲ ● ● ● ● ● ● ● ●
VCMT160412 1.2 ● ▲ ● ● ● V
MV VCMT080202-MV 0.2 ▲ ● ▲ ● ● ● ● ● ● ●
VCMT080204-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ● ● W
●
Flat Top VCMW110304 0.4
VCMW160404 0.4 ● ● ● ● ●
● ● ● ● ●
X
VCMW160408 0.8
163
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
VDGX160302L 0.2 ●
R/L VDGX160302R 0.2 ●
R
VDGX160304L 0.4 ●
VDGX160304R 0.4 ●
164
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (SMALL TOOLS) >> 354 IDENTIFICATION >> 30
Product Information GRADES >> 58 TECHNICAL INFO >> 1971
35°
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
VPET080201L-SRF 0.1 ●
VPET080201R-SRF 0.1 ●
R
VPET080202L-SRF 0.2 ●
VPET080202R-SRF 0.2 ●
R/L-SRF VPET110301L-SRF 0.1 ● S
VPET110301R-SRF 0.1 ●
VPET110302L-SRF 0.2 ●
VPET110302R-SRF 0.2 ● T
VPET1103V3L-SRF 0.03 ●
VPET1103V3R-SRF 0.03 ●
V
VPGT080201M-SMG 0.1 ●
SMG VPGT080202M-SMG 0.2 ●
VPGT110301M-SMG 0.1 ●
W
VPGT110302M-SMG 0.2 ●
165
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WBGT020101L-F 0.1 ● ●
WBGT020102L-F 0.2 ● ● ●
R
WBGT020104L-F 0.4 ● ● ●
R/L-F WBGT0201V3L-F 0.03 ● ●
S WBGTL30201L-F 0.1 ● ●
WBGTL30202L-F 0.2 ● ● ●
WBGTL30202R-F 0.2 ● ●
T WBGTL30204L-F 0.4 ● ● ●
WBGTL30204R-F 0.4 ● ●
WBGTL302V3L-F 0.03 ● ●
V
R/L-MV WBMTL30202L-MV 0.2 ▲ ● ▲ ● ● ● ● ●
WBMTL30202R-MV 0.2 ▲ ● ▲ ● ● ● ● ●
WBMTL30204L-MV 0.4 ▲ ● ▲ ● ● ● ● ●
W
WBMTL30204R-MV 0.4 ▲ ● ▲ ● ● ● ● ●
166
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (BORING BARS) >> 422 IDENTIFICATION >> 30
Product Information 80°
GRADES >> 58 TECHNICAL INFO >> 1971
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WCMT020102 0.2 ● ▲ ● ● ● ● ● ●
WCMT020104 0.4 ● ▲ ● ● ● ● ● ●
R
WCMT040202 0.2 ● ▲ ● ● ● ● ● ●
Standard
WCMT040204 0.4 ● ▲ ● ● ● ● ● ●
WCMT040208 0.8 ▲ S
WCMT06T304 0.4 ● ▲ ● ● ● ● ● ●
WCMT06T308 0.8 ● ▲ ● ● ● ● ● ●
WCMTL30202 0.2 ● ● ● ● ● ● ● T
WCMTL30204 0.4 ● ● ● ● ● ● ●
WCGT020102L 0.2 ● ●
V
R/L WCGT020102R 0.2 ●
WCGT020104L 0.4 ● ●
WCGT020104R 0.4 ●
W
WCGTL30202L 0.2 ●
WCGTL30204L 0.4 ●
X
167
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
S MV WPMT040202-MV 0.2 ▲ ● ▲ ● ● ● ● ●
WPMT040204-MV 0.4 ▲ ● ▲ ● ● ● ● ● ● ●
WPMT060304-MV 0.4 ▲ ● ▲ ● ● ● ● ● ●
T WPMT060308-MV 0.8 ▲ ● ▲ ● ● ● ● ● ● ●
168
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (EXTERNAL TURNING IDENTIFICATION >> 30
Product Information 25° TOOLS) >> 334 TECHNICAL INFO >> 1971
GRADES >> 58
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
XCMT150302-SVX 0.2 ●
SVX
XCMT150304-SVX 0.4 ▲ ●
R
XCMT150308-SVX 0.8 ▲ ●
169
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
RTG05A ● ●
RTG06A ● ●
R
RTG07A ●
RTG08A ● ●
S RTG10A ● ●
170
TURNING INSERT
TURNING INSERT
IDENTIFICATION >> 30 GRADES >> 58
Product Information TECHNICAL INFO >> 1971 SUITABLE GRADE, CHIPBREAKER >> 38
90°
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
SPGR090304R 0.4 ●
SPGN090304 0.4 ● ● ●
SPGN090308 0.8 ●
V
SPGN120304 0.4 ● ● ●
Flat Top
SPGN120308 0.8 ● ● ● ●
SPGN120312 1.2 ● W
SPGN120404 0.4 ●
SPGN120408 0.8 ● ●
SPGN150404 0.4 ● X
SPGN150408 0.8 ●
SPMN090304 0.4 ● ● ●
SPMN090308 0.8 ● ● ● ●
SPMN120304 0.4 ● ● ● ●
SPMN120304T 0.4 ●
SPMN120308 0.8 ● ● ● ● ●
Flat Top
SPMN120312 1.2 ● ▲ ● ● ●
SPMN120408 0.8 ● ●
SPMN120412 1.2 ●
SPMN150408 0.8 ●
SPMN150412 1.2 ●
SPMN190404 0.4 ●
SPMN190408 0.8 ●
SPMN190412 1.2 ●
171
TURNING INSERT
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
R
TCGN090204 0.4 ●
172
TURNING INSERT
TURNING INSERT
APPLICABLE HOLDER PAGE (BORING BARS) >> 420 IDENTIFICATION >> 30
Product Information 60° GRADES >> 58 TECHNICAL INFO >> 1971
SUITABLE GRADE, CHIPBREAKER >> 38
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UE6105
UE6020
US7020
UC5115
NX2525
NX3035
UE6110
RT9010
Inserts RE
UTi20T
HTi05T
UP20M
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
TPMR090202 0.2 ● ●
TPMR090204 0.4 ● ● ● R
TPMR090208 0.8 ●
Standard TPMR110302 0.2 ● ● ●
S
TPMR110304 0.4 ● ● ● ● ●
TPMR110308 0.8 ● ● ● ● ●
TPMR160304 0.4 ● ● ● ● ● T
TPMR160308 0.8 ● ● ● ● ●
TPMR160312 1.2 ● ● ● V
TPGR110304L 0.4 ● ● ●
TPGR110304R 0.4 ● ●
R/L W
TPGR160304L 0.4 ● ● ●
TPGR160304R 0.4 ● ● ●
● ● ●
X
TPGR160308L 0.8
TPGR160308R 0.8 ●
TPGN110302 0.2 ●
TPGN110304 0.4 ● ● ● ●
TPGN110308 0.8 ● ●
TPGN160302 0.2 ●
TPGN160308 0.8 ● ● ● ● ●
TPGN160312 1.2 ●
TPGN160316 1.6 ●
TPGN160408 0.8 ●
TPGN220404 0.4 ● ●
TPGN220408 0.8 ● ●
TPMN110304 0.4 ● ● ● ● ● ● ● ● ●
TPMN110308 0.8 ● ● ● ● ● ● ● ●
TPMN160304 0.4 ● ● ● ● ● ● ● ● ● ●
Flat Top
TPMN160308 0.8 ● ● ● ● ● ● ● ● ● ● ●
TPMN160312 1.2 ● ● ● ● ● ● ●
TPMN160320 2.0 ●
TPMN220404 0.4 ● ●
TPMN220408 0.8 ● ● ● ● ● ●
173
TURNING INSERT
TP**
TURNING INSERT
MC6015
MC6025
MC7025
MC5005
MC5015
VP05RT
VP10RT
MP7035
MP9005
MP9015
MS6015
MP3025
UH6400
UC5105
VP15TF
MT9005
MT9015
UC5115
UE6105
UE6020
US7020
NX2525
NX3035
UE6110
RT9010
Inserts RE
UP20M
UTi20T
HTi05T
AP25N
VP25N
VP45N
US735
US905
HTi10
Order Number
Shape (mm)
WITHOUT
HOLE
TPMN220412 1.2 ● ● ● ●
C
174
TURNING INSERT
TURNING INSERT
y NEGATIVE INSERTS Breaker : Std : Standard Flat : Flat Top
175
TURNING INSERT TURNING INSERT
176
TURNING INSERT
TURNING INSERT
y NEGATIVE INSERTS Breaker : Std : Standard Flat : Flat Top
177
TURNING INSERT TURNING INSERT
Two-phase Stainless Steel L 1 LM MC7025 110 ─ 150 0.10 ─ 0.30 0.30 ─ 2.00
< 280HB
(AISI 329) L 2 SH US735 65 ─ 125 0.10 ─ 0.40 0.30 ─ 2.00
M 1 MM MC7025 100 ─ 135 0.15 ─ 0.45 0.70 ─ 5.00
M 2 GM MC7025 100 ─ 135 0.16 ─ 0.50 0.50 ─ 4.00
M 3 MA MC7025 100 ─ 135 0.20 ─ 0.50 0.30 ─ 4.00
M 4 MS US735 60 ─ 115 0.16 ─ 0.50 0.50 ─ 4.00
M 5 MA US735 60 ─ 115 0.20 ─ 0.50 0.30 ─ 4.00
R 1 RM MC7025 95 ─ 125 0.25 ─ 0.55 1.50 ─ 6.00
R 2 GH US735 55 ─ 110 0.25 ─ 0.60 1.50 ─ 6.00
L 1 LM MP7035 65 ─ 105 0.10 ─ 0.30 0.30 ─ 2.00
L 2 SH US735 65 ─ 125 0.10 ─ 0.40 0.30 ─ 2.00
M 1 MM MP7035 60 ─ 95 0.15 ─ 0.45 0.70 ─ 5.00
M 2 GM MP7035 60 ─ 95 0.16 ─ 0.50 0.50 ─ 4.00
M 3 MA MP7035 60 ─ 95 0.20 ─ 0.50 0.30 ─ 4.00
178
TURNING INSERT
TURNING INSERT
y NEGATIVE INSERTS Breaker : Std : Standard Flat : Flat Top
179
TURNING INSERT TURNING INSERT
180
TURNING INSERT
TURNING INSERT
y NEGATIVE INSERTS Breaker : Std : Standard Flat : Flat Top
181
TURNING INSERT TURNING INSERT
182
TURNING INSERT
TURNING INSERT
y NEGATIVE INSERTS Breaker : Std : Standard Flat : Flat Top
Ductile Cast Iron M 2 GK MC5015 190 ─ 305 0.25 ─ 0.60 1.50 ─ 5.00
< 450MPa
(FCD450) M 3 Std UC5115 155 ─ 285 0.25 ─ 0.60 1.50 ─ 5.00
M 4 Std HTi10 100 ─ 140 0.25 ─ 0.60 1.50 ─ 5.00
R 1 RK MC5015 180 ─ 285 0.25 ─ 0.60 1.50 ─ 6.00
R 2 Flat MC5015 180 ─ 285 0.20 ─ 0.60 2.50 ─ 6.00
R 3 GH UC5115 150 ─ 275 0.25 ─ 0.60 1.50 ─ 6.00
R 4 Flat UC5115 150 ─ 275 0.20 ─ 0.60 2.50 ─ 6.00
H 1 Flat MC5015 180 ─ 285 0.20 ─ 0.60 2.50 ─ 6.00
H 2 Flat UC5115 150 ─ 275 0.20 ─ 0.60 2.50 ─ 6.00
L 1 LK MC5015 205 ─ 335 0.10 ─ 0.40 0.30 ─ 2.00
L 2 MA MC5015 190 ─ 305 0.20 ─ 0.50 0.30 ─ 4.00
L 3 MA UC5115 165 ─ 305 0.20 ─ 0.50 0.30 ─ 4.00
M 1 MK MC5015 190 ─ 305 0.20 ─ 0.55 1.50 ─ 4.00
M 2 GK MC5015 190 ─ 305 0.25 ─ 0.60 1.50 ─ 5.00
M 3 Std UC5115 165 ─ 305 0.25 ─ 0.60 1.50 ─ 5.00
M 4 Std UTi20T 85 ─ 120 0.25 ─ 0.60 1.50 ─ 5.00
R 1 RK MC5015 180 ─ 285 0.25 ─ 0.60 1.50 ─ 6.00
R 2 Flat MC5015 180 ─ 285 0.20 ─ 0.60 2.50 ─ 6.00
R 3 GH UC5115 160 ─ 290 0.25 ─ 0.60 1.50 ─ 6.00
R 4 Flat UC5115 160 ─ 290 0.20 ─ 0.60 2.50 ─ 6.00
R 5 Flat UTi20T 80 ─ 115 0.20 ─ 0.60 2.50 ─ 6.00
H 1 Flat MC5015 180 ─ 285 0.20 ─ 0.60 2.50 ─ 6.00
H 2 Flat UC5115 160 ─ 290 0.20 ─ 0.60 2.50 ─ 6.00
L 1 LK MC5005 195 ─ 315 0.10 ─ 0.40 0.30 ─ 2.00
Ductile Cast Iron < 800MPa L 2 MA MC5005 210 ─ 335 0.20 ─ 0.50 0.30 ─ 4.00
(FCD700)
L 3 MA UC5105 160 ─ 295 0.20 ─ 0.50 0.30 ─ 4.00
183
TURNING INSERT TURNING INSERT
184
TURNING INSERT
TURNING INSERT
y NEGATIVE INSERTS Breaker : Std : Standard Flat : Flat Top
185
TURNING INSERT TURNING INSERT
186
TURNING INSERT
TURNING INSERT
y 7° POSITIVE INSERT TYPE Breaker : Std : Standard Flat : Flat Top
187
TURNING INSERT TURNING INSERT
188
TURNING INSERT
TURNING INSERT
y 7° POSITIVE INSERT TYPE Breaker : Std : Standard Flat : Flat Top
189
TURNING INSERT TURNING INSERT
190
TURNING INSERT
TURNING INSERT
y 7° POSITIVE INSERT TYPE Breaker : Std : Standard Flat : Flat Top
Gray Cast Iron L 1 MK MC5015 155 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
< 350MPa
(FC300) L 2 Std UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5015 155 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
M 2 Flat UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
F 1 MK MC5015 155 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
F 2 Std UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
L 1 MK MC5015 155 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
L 2 Std UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5015 155 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
M 2 Flat UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
F 1 MK MC5005 160 ─ 255 0.08 ─ 0.30 0.30 ─ 2.00
F 2 Std UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
L 1 MK MC5005 160 ─ 255 0.08 ─ 0.30 0.30 ─ 2.00
L 2 Std UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5005 160 ─ 255 0.08 ─ 0.30 0.30 ─ 2.00
M 2 Flat UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
F 1 MK MC5015 145 ─ 235 0.08 ─ 0.30 0.30 ─ 2.00
F 2 Std UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
Ductile Cast Iron L 1 MK MC5015 145 ─ 235 0.08 ─ 0.30 0.30 ─ 2.00
< 450MPa
(FCD450) L 2 Std UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5015 145 ─ 235 0.08 ─ 0.30 0.30 ─ 2.00
M 2 Flat UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
F 1 MK MC5015 140 ─ 225 0.08 ─ 0.30 0.30 ─ 2.00
F 2 Std UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
L 1 MK MC5015 140 ─ 225 0.08 ─ 0.30 0.30 ─ 2.00
L 2 Std UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5015 140 ─ 225 0.08 ─ 0.30 0.30 ─ 2.00
M 2 Flat UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
F 1 MK MC5005 140 ─ 225 0.08 ─ 0.30 0.30 ─ 2.00
F 2 Std UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
L 1 MK MC5005 140 ─ 225 0.08 ─ 0.30 0.30 ─ 2.00
L 2 Std UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5005 140 ─ 225 0.08 ─ 0.30 0.30 ─ 2.00
Ductile Cast Iron < 800MPa M 2 Flat UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
(FCD700)
F 1 MK MC5015 130 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
F 2 Std UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
L 1 MK MC5015 130 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
L 2 Std UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
M 1 Flat MC5015 130 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
191
TURNING INSERT TURNING INSERT
192
TURNING INSERT
TURNING INSERT
y 7° POSITIVE INSERT TYPE
Cutting Cutting Speed Feed Depth of Cut
Work Material Hardness Priority Breaker Grade
Mode (m/min) (mm/rev) (mm)
N
F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
Aluminium Alloy
(A6061, A7075) Si<5% F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
Aluminium Alloy
(AC4B) 5% < Si < 10% F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
Aluminium Alloy
(ADC12, A390) Si>10% F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
F 1 AZ HTi10 300 ─ 700 0.10 ─ 0.40 0.20 ─ 3.00
193
TURNING INSERT TURNING INSERT
y 11° POSITIVE INSERT TYPE Breaker : Std : Standard Flat : Flat Top
194
TURNING INSERT
TURNING INSERT
Cutting Cutting Speed Feed Depth of Cut
Work Material Hardness Priority Breaker Grade
Mode (m/min) (mm/rev) (mm)
K
F 1 R-R/L NX2525 150 ─ 205 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat UC5105 135 ─ 250 0.08 ─ 0.30 0.30 ─ 2.00
L 2 N-Flat NX2525 125 ─ 170 0.08 ─ 0.30 0.30 ─ 2.00
L 3 R-Std NX2525 125 ─ 170 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat UC5105 135 ─ 250 0.08 ─ 0.30 0.30 ─ 2.00
M 2 N-Flat NX2525 125 ─ 170 0.08 ─ 0.30 0.30 ─ 2.00
M 3 R-Std NX2525 125 ─ 170 0.08 ─ 0.30 0.30 ─ 2.00
Gray Cast Iron F 1 R-R/L NX2525 150 ─ 205 0.05 ─ 0.12 0.20 ─ 0.60
< 350MPa
(FC300) F 2 R-R/L HTi10 100 ─ 145 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
L 2 N-Flat UE6110 130 ─ 200 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat UC5115 130 ─ 245 0.08 ─ 0.30 0.30 ─ 2.00
M 2 N-Flat UE6110 130 ─ 200 0.08 ─ 0.30 0.30 ─ 2.00
F 1 R-R/L UTi20T 80 ─ 115 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat VP15TF 115 ─ 160 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat VP15TF 115 ─ 160 0.08 ─ 0.30 0.30 ─ 2.00
F 1 R-R/L NX2525 140 ─ 190 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat UC5105 130 ─ 235 0.08 ─ 0.30 0.30 ─ 2.00
L 2 N-Flat NX2525 115 ─ 160 0.08 ─ 0.30 0.30 ─ 2.00
L 3 R-Std NX2525 115 ─ 160 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat UC5105 130 ─ 235 0.08 ─ 0.30 0.30 ─ 2.00
M 2 N-Flat NX2525 115 ─ 160 0.08 ─ 0.30 0.30 ─ 2.00
M 3 R-Std NX2525 115 ─ 160 0.08 ─ 0.30 0.30 ─ 2.00
Ductile Cast Iron F 1 R-R/L NX2525 140 ─ 190 0.05 ─ 0.12 0.20 ─ 0.60
< 450MPa
(FCD450) F 2 R-R/L HTi10 95 ─ 135 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
L 2 N-Flat UE6110 120 ─ 190 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat UC5115 125 ─ 230 0.08 ─ 0.30 0.30 ─ 2.00
M 2 N-Flat UE6110 120 ─ 190 0.08 ─ 0.30 0.30 ─ 2.00
F 1 R-R/L UTi20T 75 ─ 110 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat VP15TF 110 ─ 150 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat VP15TF 110 ─ 150 0.08 ─ 0.30 0.30 ─ 2.00
F 1 R-R/L NX2525 125 ─ 170 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat UC5105 115 ─ 210 0.08 ─ 0.30 0.30 ─ 2.00
L 2 N-Flat NX2525 105 ─ 140 0.08 ─ 0.30 0.30 ─ 2.00
L 3 R-Std NX2525 105 ─ 140 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat UC5105 115 ─ 210 0.08 ─ 0.30 0.30 ─ 2.00
M 2 N-Flat NX2525 105 ─ 140 0.08 ─ 0.30 0.30 ─ 2.00
M 3 R-Std NX2525 105 ─ 140 0.08 ─ 0.30 0.30 ─ 2.00
Ductile Cast Iron F 1 R-R/L NX2525 125 ─ 170 0.05 ─ 0.12 0.20 ─ 0.60
< 800MPa
(FCD700) F 2 R-R/L HTi10 85 ─ 120 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
L 2 N-Flat UE6110 105 ─ 170 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat UC5115 110 ─ 205 0.08 ─ 0.30 0.30 ─ 2.00
M 2 N-Flat UE6110 105 ─ 170 0.08 ─ 0.30 0.30 ─ 2.00
F 1 R-R/L UTi20T 65 ─ 95 0.05 ─ 0.12 0.20 ─ 0.60
L 1 N-Flat VP15TF 95 ─ 135 0.08 ─ 0.30 0.30 ─ 2.00
M 1 N-Flat VP15TF 95 ─ 135 0.08 ─ 0.30 0.30 ─ 2.00
195
196
TURNING TOOLS
CBN&PCD INSERT STANDARDS
CBN&PCD INSERT GRADES
IDENTIFICATION ................................ 198 POSITIVE INSERTS WITHOUT
COATED CBN SERIES ........................ 200 HOLE ....................................... 261
UNCOATED CBN SERIES ................... 206 SP** ............................................. 261
CBN.................................................... 209 TB** ............................................. 262
HONING ............................................. 210 TP** ............................................. 263
CBN GROOVING SERIES(GY/MG) ...... 211 GY ............................................... 264
CBN BREAKER INSERT...................... 212 RTG ............................................. 265
WIPER INSERT................................... 213 STANDARD OF PCD TURNING
PCD(SINTERED DIAMOND) ................ 214 INSERTS ..................................... 266
CLASSIFICATION ............................... 216 NEGATIVE INSERTS WITH HOLE .... 266
STANDARD OF CBN TURNING CN** ............................................ 266
INSERTS ..................................... 222 DN** ............................................ 267
NEGATIVE INSERTS WITH HOLE .... 222 SN**............................................. 268
CN** ............................................ 222 TN** ............................................. 269
DN** ............................................ 226 VN**............................................. 270
SN**............................................. 230 NEGATIVE INSERTS WITHOUT
TN** ............................................. 232 HOLE ....................................... 271
VN**............................................. 235 SN**............................................. 271
WN**............................................ 237 POSITIVE INSERTS WITH HOLE ..... 272
MGTR .......................................... 238 CC** ............................................ 272
NEGATIVE INSERTS WITHOUT CP**............................................. 273
HOLE ....................................... 239 DC** ............................................ 274
CN** ............................................ 239 SP** ............................................. 275
DN** ............................................ 240 TC** ............................................. 276
RN** ............................................ 241 TP** ............................................. 277
SN**............................................. 242 VB** ............................................. 279
TN** ............................................. 243 VC**............................................. 280
POSITIVE INSERTS WITH HOLE ..... 244 WC**............................................ 281
CC** ............................................ 244 WP** ............................................ 282
CP**............................................. 248 DE**............................................. 283
DC** ............................................ 249 TE** ............................................. 284
TC** ............................................. 252 VD**............................................. 285
TP** ............................................. 254 POSITIVE INSERTS WITHOUT
VB** ............................................. 257 HOLE ....................................... 286
VC**............................................. 259 SP** ............................................. 286
WC**............................................ 260 TP** ............................................. 287
197
CBN & PCD TURNING INSERTS
IDENTIFICATION
M
M
CBN & PCD TURNING
IC S
IC
INSERTS
z x b
T NP - C N G A c v n
One
M With Hole Cylindrical Hole
Sided
Without
N Hole
─ No
X ─ ─ ─ Special Design
198
CBN & PCD TURNING INSERTS
m , .
12 04 04 G WS 2 / u
11 u
12
J u
13
R
u
14
199
CBN & PCD TURNING INSERTS
BC8100 Series
CBN & PCD TURNING
INSERTS
y FEATURES
The BC8100 series of CBN coated materials for machining hardened steel uses a newly-developed CBN substrate together with a
special coating. The CBN substrate employs new "Ultra Micro-particle Binder" technology to successfully prevent sudden fractures
during cutting and achieve long tool life. The coating consists of a special PVD coating suitable for various cutting types, which exhibits
outstanding fracture resistance and wear resistance.
y New technology
New Advanced Ceramic Coating
NEW NEW NEW
*Graphical representation.
*With BC8110
Medium Grain CBN
Binder Macroparticles
y The new ultra micro-particle binder prevents linear crack development to avoid sudden fracturing.
200
CBN & PCD TURNING INSERTS
W
NE
BC8105 BC8110
INSERTS
For surface finishes up to Rz 2.4µm (Ra 0.6µm)
2.5 times longer life
300
Cutting Speed vc (m/min)
200
W
BC8110 NE
NE
W
BC8120
100
BC8130
W W
NE NE
sed Radially
BC8120 BC8130
For Continuous to Medium Interrupted Cutting For Unstable Applications and Heavy Interrupted Cutting
1st choice for roughing and pre-finishing Tolerance accuracy held over a high no. of impacts
80
100
80 60
60
40 40
20
20
0
BC8120 Conventional
0
BC8130 Conventional
Insert:NP-CNGA120408TA2 Insert:NP-CNGA120408TH2
Component:Clamp cylinder Component:Gear
Cutting Speed:130m/min Cutting Speed:130m/min
Feed:0.08mm/rev Feed:0.08mm/rev
Depth of Cut:0.5mm Depth of Cut:0.15mm
Cutting Mode:Wet Cutting Cutting Mode:Wet Cutting
201
CBN & PCD TURNING INSERTS
NE
W
BC8105 Highest Accuracy
CBN & PCD TURNING
y FEATURES
Use of a CBN substrate with excellent wear resistance and chipping resistance,
INSERTS
Surface Finish
1.0 BC8105
y BC8105 can maintain excellent surface roughness. 0 100 200 300 400
Number of Workpieces (pcs)
Hardened Steel External Continuous < 0.15 < 0.2 Dry, Wet
(Heat Treated Steel etc) Cutting
Hardened Steel External Continuous < 0.20 < 0.35 Dry, Wet
(Heat Treated Steel etc) Cutting
202
CBN & PCD TURNING INSERTS
NE
W
BC8120 General Application
INSERTS
together with a coating film having superior wear resistance, combines both fracture
resistance and wear resistance while exhibiting outstanding crater wear resistance.
Number of Impacts
Machining Methods External Interrupted Cutting
Average
Cutting Speed vc (m/min) 250 7500
Feed f (mm/rev) 0.15
BC8120
Depth of Cut ap (mm) 0.1 5000
Cutting Mode Dry
2500
NE
W
BC8130 Tough Machining
y FEATURES
Use of a CBN substrate with excellent cutting edge strength, together with a coating
film that combines hardness with impact resistance, allows it to exhibit outstanding
cutting edge strength and fracture resistance.
For Unstable Applications and Heavy Interrupted Cutting
Tolerance accuracy maintained over a high number of impacts
40000
Machining Methods External Heavy Interrupted Cutting Average
Cutting Speed vc (m/min) 250 30000
Feed f (mm/rev) 0.05
Depth of Cut ap (mm) 0.1 20000
Average
Cutting Mode Wet
10000
Hardened Steel External Interrupted < 0.20 < 0.30 Dry, Wet
(Heat Treated Steel etc) Cutting
203
CBN & PCD TURNING INSERTS
MBC010/MBC020
CBN & PCD TURNING
Main Coating
Grade Grade Features and Application
Component Layer
INSERTS
Coated CBN for High Speed Continuous Cutting CBN (Micro Grain)
MBC010 makes the best use of special ceramic binder structure, actualizing
MBC010 high wear resistance. High wear resistance enables continuous machining at
TiN TiN
high speed of over 300m/min. Al2O3
MBC010
0.1 4
MBC010
0.05 2
0 10 20 30 40 0 10 20 30
Cutting Time (min) Cutting Time (min)
0.06
Conventional
MBC020 Coated
CBN A
0.04
0.02 Conventional
Coated
CBN B
0.00
0 2 4 6 8 10 12 14 16 0 5 10 15 20
Cutting Time (min) Cutting Time (min)
204
CBN & PCD TURNING INSERTS
Memo
205
14
CBN & PCD TURNING INSERTS
MB8025
For Continuous to Medium Interrupted Cutting CBN (Micro Grain)
MB825 Excellent balance of wear resistance and TiC
fracture resistance due to introduction of 100
Al2O3
micro-grain CBN particles.
MB835
For Heavy Interrupted Cutting MB825
CBN (Micro Grain)
MB835 Improved grade employing micro-grain CBN TiN Light Heavy
particles. Excellent fracture resistance for Continuous Interrupted
Al2O3 Cutting Mode
use in heavy interrupted cutting.
206
CBN & PCD TURNING INSERTS
INSERTS
aSince all inserts are CBN sintered bodies, there are no limits to the depths of cut as with CBN brazing tools, allowing machining with large depths of cut.
aFor rough machining of cast iron, high-speed, high-efficiency machining, which is a characteristic of CBN tools, can be achieved.
Combines wear resistance and fracture resistance
aUse of micro-grain CBN with a newly-developed special binder provides high wear resistance.
aUse of Mitsubishi's original high-efficiency sintering technology provides high fracture resistance and supports machining with large depths of cut.
0.10
MBS140
with hole
CUTTING PERFORMANCE
VB wear
0.40
0.35
Defective product
Previous
0.30
coated grade
Flank Wear (mm)
0.25
Previous coated grade
0.20
0.15
0.10 MB5015
0.05
0
20 40 60 80 100 120 140 160 180 200
Number of Drilling
<Cutting Conditions>
MB5015
Workpiece : FC200 (Centrifugal casting) &63.0
Cutting Speed : 800m/min Feed : 0.35mm/rev Depth of Cut : 0.03mm
Work : Centrifugal casting Cylinder liner Hole Depth : 100mm
207
CBN & PCD TURNING INSERTS
Range of
use
use
Full face CBN
INSERTS
Full face CBN insert can be used for chamfering that use
higher depth of cut
CUTTING PERFORMANCE
y Continuous cutting of high density sintered alloy y Continuous cutting of sintered alloy
2.0 2.0
Previous
coated grade A
Finished Surface : Ra (!m)
0 0
100 300 500 700 17 34 51 68 85 102
Hardness of Workpiece Hardness of Workpiece
<Cutting Conditions> <Cutting Conditions>
Workpiece : High density sintered alloy Insert : NP-CNGA120408 Workpiece : Sintered alloy Insert : NP-CNGA120408
Cutting Speed : 190m/min Feed : 0.15mm/rev Cutting Speed : 100m/min Feed : 0.15mm/rev
Depth of Cut : 0.1mm Depth of Cut : 0.1mm
Wet Cutting Wet Cutting
APPLICATION EXAMPLE
Insert NP-TNGA160404SF3 NP-CNGA120404SE2 CCGW060204FS
Workpiece
(mm/rev)
Cutting
208
CBN & PCD TURNING INSERTS
CBN
a Suitable for high speed finishing of heat treated steel, sintered ferrous
alloy and cast iron.
INSERTS
a Heat Treated Steel
Cutting Recommended Recommended Cutting Conditions
Type
Work Material
Mode Grade Cutting Speed (m/min) Feed (mm/rev) Depth of Cut (mm)
Full face CBN High speed NE
W BC8105 250 (100 ─ 350) ─ 0.15 ─ 0.2
finishing cutting MBC010 250 (150 ─ 400) ─ 0.2 ─ 0.2
Continuous cutting BC8110 200 (100 ─ 300) ─ 0.2 ─ 0.3
Coated
Interrupted cutting
for general purpose 120 ( 60 ─ 150) ─ 0.2 ─ 0.3
High speed
finishing cutting MB810 200 (150 ─ 300) ─ 0.3 ─ 0.15
Continuous to light
interrupted cutting MB825 120 ( 70 ─ 150) ─ 0.3 ─ 0.5
Interrupted cutting MB835 100 ( 50 ─ 120) ─ 0.3 ─ 0.5
a Cast Iron
Workpiece Cutting Speed (m/min) Feed Depth of Cut
Work Material (mm/rev) (mm) Coolant
Structure 250 500 750 1000 1250
JIS FC250Ferritic + Pearlitic ─ 1.0
Gray Cast Iron MBS140 ─ 0.5 MBS140 Dry,Wet
MB710 MB730
JIS FC300 Pearlitic ─ 5.0
Alloy Cast Iron Pearlitic MB4020 ─ 0.4 ─ 0.5 Dry,Wet
JIS FCD400 Ferritic MB710
Ductile Cast Iron Ferritic + Pearlitic ─ 0.4 ─ 0.5 Dry,Wet
JIS FCD700 Pearlitic MB730
a Sintered Alloy
Recommended Recommended Cutting Conditions
Work Material
Grade Cutting Speed (m/min) Feed (mm/rev) Depth of Cut (mm)
General Sintered Alloy MB4020 250 (80 ─ 300) ─ 0.2 ─ 0.3
High Density Sintered Alloy MB4020 150 (80 ─ 250) ─ 0.2 ─ 0.3
Sintered Alloy MB4020, MB835 100 (80 ─ 150) ─ 0.2 ─ 0.3
a Valve Seat
Amount of Hard Particles None or Small Large
Hardness of Workpiece (HV) 150 250 300 350
Plunge Cut MB4020 MB825 MB835
Traverse Cut MB4020 MB710 MB825
a Roll
Recommended Cutting Conditions
Work Material Grade
Cutting Speed (m/min) Feed (mm/rev) Depth of Cut (mm)
Cast Steel
Adamite Cast Steel MB825, MB8025 80 (30 ─ 130) 0.3 (0.1 ─ 0.5) 0.2 ─ 3.0
Ductile Cast Iron
Granular Cast Iron MB710 80 (30 ─ 130) 0.3 (0.1 ─ 0.5) 0.2 ─ 3.0
Chilled Cast Iron
High Chromium Steel
High Alloy Steel MB825, MB8025 80 (30 ─ 130) 0.3 (0.1 ─ 0.5) 0.2 ─ 3.0
High Speed Steel MB730 50 (20 ─ 70) 0.25 (0.1 ─ 0.4) 0.1 ─ 3.0
Cemented Carbide MB730, MBS140 20 (10 ─ 30) ─ 0.2 ─ 0.2
209
CBN & PCD TURNING INSERTS
HONING
Honing for machining hardened steel
For the CBN BC8020, MBC010 and MBC020 coated grades, MB4020 and MB710/MB730 a wide range of edge
CBN & PCD TURNING
honing styles are available to cover a large range of applications and to represent Mitsubishi Materials’ unique cutting tool
technology.
INSERTS
y General cutting
Good
FS・FN
Sharpness
FS
TS
Bad
NP-CNGA120408- G A 2
W
%°
R
A S N H
General Vibration and burr control Crater wear control High efficiency
α W R α W R α W R α W R
Continuous
F cutting 15 0.1 0 15 0.1 0.01 15 0.05 0.01 ─ ─ ─
G General
cutting
25 0.13 0.03 25 0.13 0.01 25 0.05 0.01 25 0.27 0.03
Interrupted
T cutting 35 0.13 0.03 35 0.13 0.01 35 0.05 0.01 35 0.27 0.03
210
CBN & PCD TURNING INSERTS
INSERTS
offers high rigidity equivalent to a 1-piece type despite being a 2-piece type. MG has a wide
insert location face for high gripping force. A combination with these holders allows it to
deliver excellent performance when grooving hardened steel.
NEW
a BC8110 coated materials for continuous machining of hardened steel
have been added to GY inserts.
BC8110 materials with excellent wear resistance have been added. Compared to conventional
materials, they display excellent wear resistance to achieve long tool life. A blade width of 6.0
has also been added to the lineup of BC8110.
70
Insert Width (mm)
APPLICATION EXAMPLE
Insert GY1G0300F020N-GFGS (Grade : BC8110)
Workpiece
SNCM230H (HRC58─62)
BC8110
Result
Previous
coated
grade
211
CBN & PCD TURNING INSERTS
Area
wrapping around the holder under finish cutting conditions. 0.4
BM Breaker
(Deep shoulder Milling)
Good for deep depth
cutting of carburized layer. <Cutting Conditions>
Workpiece : JIS SCr420H (55HRC)
Recommend and under Conventional (Light cutting depth)
Insert : BF-CNGG120408TA4
ap=0.6mm
Cutting Speed : 100m/min
Feed : 0.2mm/rev
Depth of Cut : 0.1mm
Available in BC8120 grade. Dry Cutting
NP-CNGA120408GA4
No. of Cutting Edge Corners
NP-CNGA120408GA2
No. of Cutting Edge Corners
10-Insert Pack
10-INSERTS PACKS
Two types of packs for MB8025 Multi-corner type inserts, are available,
a single insert pack and a ten insert pack. For easy storage.
TNP-CNGA120404G2
10-Insert Pack Symbol
212
CBN & PCD TURNING INSERTS
WIPER INSERT
a Improving Surface Finish
Under the same machining conditions as conventional breakers, but with the feed rate
INSERTS
roughing and finishing operations.
a Increased Tool Life
When a change to high feed conditions, the time required to cut one component is decreased,
thus more parts can be machined with each insert. In addition, the high feed rate prevents
rubbing, therefore, delaying the progression of wear and increasing the tool life of the insert.
a Improving Chip Control
Under high feed conditions, the chips generated become thicker and are more easily
broken, thus, chip control is improved.
Without Wiper
5
with WS wiper
0
0.05 0.1 0.2 0.3
Feed (mm/rev)
*
( A double clamp, high rigidity tool is
recommended.)
efficiency. A holder with end cutting angle 91° can improve wiper
efficiency, however, there is no wiper efficiency with other end
cutting angles (60°, 90°,107°etc.).
End Cutting
Angle End Cutting Angle
Non 95°
93°
restriction (Specified)
0.4
Without Wiper With Wiper Without Wiper With Wiper
Depth of Cut (mm)
0.3
0.2
0.1
213
CBN & PCD TURNING INSERTS
PCD(SINTERED DIAMOND)
a Suitable for materials such as aluminium alloy,
non-ferrous metals, and fibre strengthened plastic.
CBN & PCD TURNING
25μm Coarse grain diamond particles are sintered and wear resistance is
MD205 excellent. Use when wear resistance with MD220 is insufficient.
SELECTION STANDARD
a TURNING
Recommended Grade Recommended Cutting Conditions
Work Material
MD205 MD220 MD2030 Cutting Speed (m/min) Feed (mm/rev) Depth of Cut (mm)
Aluminium Alloy (Si < 12%) e u 800 (200 ─ 1200) ─ 0.2 ─ 1.0
Aluminium Alloy (Si >13%) e u 600 (200 ─ 1000) ─ 0.2 ─ 1.0
Copper Alloy e 700 (200 ─ 1200) ─ 0.2 ─ 1.0
Strengthened Plastic e 600 (100 ─ 1000) ─ 0.4 ─ 1.0
Glass Fibre Reinforced Plastic e 500 (100 ─ 800) ─ 0.25 ─ 1.0
Carbon u e 400 (100 ─ 600) ─ 0.3 ─ 1.0
Ceramics u 50 (30 ─ 80) ─ 0.1 ─ 1.0
Hard Rubber e 600 (300 ─ 800) ─ 0.15 ─ 1.0
Wood Inorganic Board e 1300 (300 ─ 4000) ─ 0.4 ─
Cemented Carbide e u 15 (5 ─ 20) ─ 0.2 ─ 0.5
(Note1) e : 1st recommendation. u : 2nd recommendation
(Note2) Not suitable for steel.
214
Memo
Memo
215
CBN & PCD TURNING INSERTS
CLASSIFICATION
NEGATIVE INSERTS WITH HOLE
Product Name
CBN & PCD TURNING
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80°
Tolerance
Breaker Name
Type and
Cross Section
INSERTS
*
(Note) Two types of packs for type inserts, pack of single insert and pack of ten inserts, are available. (The single pack is standard.)
Please refer to the "Standard of inserts".
216
CBN & PCD TURNING INSERTS
CLASSIFICATION
NEGATIVE INSERTS WITH HOLE
Product Name
Tolerance
Breaker Name
Type and
Cross Section
INSERTS
CNGA SNGA TNGA
Multi-corner Type
Flat Top
Double Sided G
(Solid CBN)
^ 225 ^ 231 ^ 234
CNMA
STANDARD
Flat Top
One-corner Type
Single Sided
M
^ 225, 266
DNGA SNGA TNGA VNGA
Flat Top
One-corner Type
G
Single Sided
^ 229, 267 ^ 231, 268 ^ 234, 269 ^ 236, 270
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80°
Tolerance
Breaker Name
Type and
Cross Section
NP-VBGW_o2
Flat Top
Multi-corner Type
Single Sided
^ 257
NEW PETIT CUT
NP-VBGW_o
Flat Top
One-corner Type
Single Sided G
^ 258
NP-VBGT_R-F
One-corner Type
R-F
Single Sided
With Breaker
^ 279
217
CBN & PCD TURNING INSERTS
CLASSIFICATION
7° POSITIVE INSERTS WITH HOLE
Product Name
CBN & PCD TURNING
Rhombic 80° Rhombic 55° Square 90° Triangular 60° Rhombic 35° Trigon 80°
Tolerance
Breaker Name
Type and
Cross Section
INSERTS
M NP-CCMH
One-corner Type Standard
Single Sided
With Breaker
^ 272
NP-CCGW_o NP-DCGW_o
Flat Top
One-corner Type
Single Sided
G
^ 246 ^ 250
NP-CCMW_o NP-DCMW_o NP-WCMW_o
Flat Top
One-corner Type
Single Sided
^ 247 ^ 251 ^ 260
NP-CCMW
Flat Top
One-corner Type
Single Sided
M
^ 272
NP-DCMT_R/L-F
One-corner Type R/L-F
Single Sided
With Breaker
^ 274
NP-VCGT_R-F
One-corner Type R-F
Single Sided G
With Breaker
^ 280
CCGW DCGW TCGW
Flat Top
Multi-corner Type
Single Sided G
STANDARD
*
(Note) Two types of packs for type inserts, pack of single insert and pack of ten inserts, are available. (The single pack is standard.)
Please refer to the "Standard of inserts".
218
CBN & PCD TURNING INSERTS
CLASSIFICATION
11° POSITIVE INSERTS WITH HOLE
Product Name
Tolerance
Breaker Name
Type and
Cross Section
INSERTS
NP-CPGB_o2 NP-TPGB_o3
Flat Top
Multi-corner Type
Single Sided
^ 248 ^ 254
G
NP-TPGX_o3
Flat Top
Multi-corner Type
Single Sided
^ 255
NP-CPMB_o NP-TPMB_o
Flat Top
One-corner Type
Single Sided
^ 248 ^ 255
M
NEW PETIT CUT
NP-CPMH
One-corner Type
Standard
Single Sided
With Breaker
^ 273
NP-TPGX_o
Flat Top
One-corner Type
Single Sided G
^ 255
NP-TPMX_R/L-F
One-corner Type
R/L-F
Single Sided
With Breaker
^ 277
M
NP-TPMH_R/L-F
One-corner Type
R/L-F
Single Sided
With Breaker
^ 277
CPGT WPGT
One-corner Type Standard
Single Sided
With Breaker
^ 273 ^ 282
SPGX TPGX
STANDARD
Flat Top
One-corner Type
Single Sided G
219
CBN & PCD TURNING INSERTS
CLASSIFICATION
15° POSITIVE INSERTS WITH HOLE
CBN & PCD TURNING
Rhombic 35°
Tolerance
Breaker Name
Type and
Cross Section
INSERTS
VDGX_R/L-F
One-corner Type R/L
Single Sided
( )
G
For Aluminium
With Breaker
^ 285
Breaker Name
Type and
Cross Section
TEGX_R/L
One-corner Type R/L
Single Sided
(For Aluminium
With Breaker) ^ 284
DEGX_R/L-F
One-corner Type R/L-F
Single Sided
( )
G
For Aluminium
With Breaker
^ 283
TEGX
Flat Top
One-corner Type
Single Sided
(For Aluminium)
^ 284
220
CBN & PCD TURNING INSERTS
CLASSIFICATION
NEGATIVE INSERTS WITHOUT HOLE
Tolerance
Breaker Name
Type and
Cross Section
INSERTS
SNGN TNGN
Flat Top
One-corner Type
Single Sided
^ 242, 271 ^ 243
G
CNGN DNGN SNGN TNGN RNGN
Flat Top
Multi-corner Type
Double Sided
(Solid CBN)
^ 239 ^ 240 ^ 242 ^ 243 ^ 241
Tolerance
Breaker Name
Tool Holder
Type and Inserts
Type
Cross Section
TBGN GY_GFGS
Flat Top
Multi-corner Type
G GY Type
Single Sided
^ 262 ^ 264
MGTR
MG Type
11° POSITIVE INSERTS WITHOUT HOLE
^ 238
Square 90° Triangular 60°
Tolerance
221
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-CNGA120408GS4 ● ● 12.7 4.76 0.8 2.1 5.16 80°
LE
NP-CNGA120408TA4 ▲ ● ● ● 12.7 4.76 0.8 2.1 5.16 80° IC S
NP-CNGA120408TH4 ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408TS4 ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120412FS4 ▲ ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GA4 ▲ ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GH4 ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GN4 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GS4 ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412TA4 ▲ ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412TH4 ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412TS4 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120404FSWS4 ● ● ● 12.7 4.76 0.4 1.9 5.16 80°
NP-CNGA120404GAWS4 ▲ ● ● 12.7 4.76 0.4 1.9 5.16 80°
EPSR
NP-CNGA120404GSWS4 ● ● 12.7 4.76 0.4 1.9 5.16 80° RE
WIPER
NP-CNGA120408FSWS4 ● ● ● 12.7 4.76 0.8 2.1 5.16 80°
D1
IC S
NP-CNGA120412FSWS4 ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GAWS4 ▲ ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GSWS4 ● ● 12.7 4.76 1.2 2.3 5.16 80°
BF-CNGG120404TA4 ● 12.7 4.76 0.4 1.9 5.16 80° EPSR
BF BF-CNGG120408TA4 ● 12.7 4.76 0.8 2.1 5.16 80° RE
D1
IC S
222
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
NP-CNGA120408GN2 ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408GS2 ● ● ● ● ● ● ● 12.7 4.76 0.8 2.1 5.16 80°
LE
IC S
NP-CNGA120408SE2 ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408SF2 ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408T2 ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408TA2 ▲ ● ● ● ● ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408TH2 ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408TS2 ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120412FS2 ▲ ● ● ● ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412G2 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GA2 ▲ ● ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GH2 ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GN2 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GS2 ● ● ● ● ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412SE2 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412SF2 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412T2 ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412TA2 ▲ ● ● ● ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412TH2 ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412TS2 ● ● 12.7 4.76 1.2 2.3 5.16 80°
TNP-CNGA120404G2 ● 12.7 4.76 0.4 1.9 5.16 80° EPSR
TNP-CNGA120404T2 ● 12.7 4.76 0.4 1.9 5.16 80° RE
223
CBN & PCD TURNING INSERTS
CN**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
NP-CNGA120408GAWS2 ▲ ● ● ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-CNGA120408GSWS2 ● ● ● 12.7 4.76 0.8 2.1 5.16 80°
LE
IC S
NP-CNGA120412FSWS2 ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GAWS2 ▲ ● ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
NP-CNGA120412GSWS2 ● ● ● 12.7 4.76 1.2 2.3 5.16 80°
BF-CNGM120404TA2 ● 12.7 4.76 0.4 1.9 5.0 80° EPSR
BF BF-CNGM120404TS2 ● 12.7 4.76 0.4 1.9 5.16 80° RE
D1
BF-CNGM120408TS2 ● 12.7 4.76 0.8 2.1 5.16 80°
LE
BF-CNGM120412TA2 ● 12.7 4.76 1.2 2.3 5.16 80°
IC S
BF-CNGM120412TS2 ● 12.7 4.76 1.2 2.3 5.16 80°
BM-CNGM120404TA2 ● 12.7 4.76 0.4 1.9 5.16 80° EPSR
BM-CNGM120408TA2 ▲ ● 12.7 4.76 0.8 2.1 5.16 80° RE
BM
D1
BM-CNGM120412TA2 ▲ ● 12.7 4.76 1.2 2.3 5.16 80°
LE
IC S
RE
NP-CNMA120408G ● ● 12.7 4.76 0.8 2.1 5.16 80°
D1
224
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
LE
RE
CNMA120408 ● ● ● 12.7 4.76 0.8 3.6 5.16 80°
D1
WITH
HOLE
CNMA120412 ● ● 12.7 4.76 1.2 3.6 5.16 80°
IC S
D1
CNGA120412 ● 12.7 4.76 1.2 3.6 5.16 80°
IC S
225
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
226
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
BF-DNGG150412TA4 ● 12.7 4.76 1.2 1.9 5.16 55°
LE
IC S
227
CBN & PCD TURNING INSERTS
DN**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
228
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
BF-DNGM150408TS2 ● 12.7 4.76 0.8 2 5.16 55° HOLE
LE
BF-DNGM150412TA2 ● 12.7 4.76 1.2 1.9 5.16 55°
IC S
BF-DNGM150412TS2 ● 12.7 4.76 1.2 1.9 5.16 55°
BM-DNGM150404TA2 ● 12.7 4.76 0.4 2.1 5.16 55° EPSR
RE
BM-DNGM150408TA2 ▲ ● 12.7 4.76 0.8 2 5.16 55°
BM
BM-DNGM150412TA2 ▲ ● 12.7 4.76 1.2 1.9 5.16 55°
D1
BM-DNGM150604TA2 ● 12.7 6.35 0.4 2.1 5.16 55°
LE
BM-DNGM150608TA2 ● 12.7 6.35 0.8 2 5.16 55°
IC S
BM-DNGM150612TA2 ● 12.7 6.35 1.2 1.9 5.16 55°
NP-DNMA150404F □ ● ● 12.7 4.76 0.4 1.5 5.16 55°
NP-DNMA150404G ● ● 12.7 4.76 0.4 1.5 5.16 55°
NP-DNMA150404GS ● ● 12.7 4.76 0.4 1.5 5.16 55°
EPSR
NP-DNMA150404T □ ● ● ● 12.7 4.76 0.4 1.5 5.16 55° RE
LE
NP-DNMA150408F □ ● ● 12.7 4.76 0.8 1.7 5.16 55°
NP-DNMA150408G ● ● 12.7 4.76 0.8 1.7 5.16 55°
D1
NP-DNMA150408GS ● ● 12.7 4.76 0.8 1.7 5.16 55°
NP-DNMA150408T □ ● ● ● 12.7 4.76 0.8 1.7 5.16 55° IC S
D1
229
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-SNGA120412GA4 ● 12.7 4.76 1.2 2.5 5.16 90°
LE
IC S
D1
NP-SNGA120408SE2 ● 12.7 4.76 0.8 2.3 5.16 90°
NP-SNGA120408SF2 ● 12.7 4.76 0.8 2.3 5.16 90° LE
IC S
NP-SNGA120408T2 ● 12.7 4.76 0.8 2.3 5.16 90°
NP-SNGA120408TS2 ● 12.7 4.76 0.8 2.3 5.16 90°
NP-SNGA120412FS2 ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412G2 ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412GA2 ● ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412GS2 ● ● ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412SE2 ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412SF2 ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412T2 ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNGA120412TS2 ● 12.7 4.76 1.2 2.5 5.16 90°
TNP-SNGA120404G2 ● 12.7 4.76 0.4 2.1 5.16 90° EPSR
TNP-SNGA120404T2 ● 12.7 4.76 0.4 2.1 5.16 90° RE
230
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
LE
RE
NP-SNMA120408F □ ● ● 12.7 4.76 0.8 2.3 5.16 90°
D1
NP-SNMA120408G ● ● 12.7 4.76 0.8 2.3 5.16 90°
NP-SNMA120408GS ● ● 12.7 4.76 0.8 2.3 5.16 90°
IC S
NP-SNMA120408T □ ● ● ● 12.7 4.76 0.8 2.3 5.16 90°
NP-SNMA120412F □ ● ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNMA120412G ● 12.7 4.76 1.2 2.5 5.16 90°
NP-SNMA120412T □ ● ● ● 12.7 4.76 1.2 2.5 5.16 90°
SNGA120404 □ □ 12.7 4.76 0.4 4 5.16 90° EPSR
SNGA120408 ● ● 12.7 4.76 0.8 4.1 5.16 90°
LE
RE
D1
SNGA120412 ● ● 12.7 4.76 1.2 4.1 5.16 90°
IC S
D1
SNGA120412 ● 12.7 4.76 1.2 5.16 90°
IC S
231
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-TNGA160408GS6 ● ● 9.525 4.76 0.8 1.8 3.81 60°
NP-TNGA160408TA6 ▲ ● ● ● 9.525 4.76 0.8 1.8 3.81 60° IC
LE
S
NP-TNGA160408TH6 ● ● 9.525 4.76 0.8 1.8 3.81 60°
NP-TNGA160408TS6 ● 9.525 4.76 0.8 1.8 3.81 60°
NP-TNGA160412FS6 ▲ ● ● ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412GA6 ▲ ● ● ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412GH6 ● ● ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412GN6 ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412GS6 ● ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412TA6 ▲ ● ● ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412TH6 ● ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160412TS6 ● 9.525 4.76 1.2 1.9 3.81 60°
NP-TNGA160402FS3 ● 9.525 4.76 0.2 1.5 3.81 60°
NP-TNGA160402GA3 ● ● 9.525 4.76 0.2 1.5 3.81 60°
NP-TNGA160402GN3 ● 9.525 4.76 0.2 1.5 3.81 60°
NP-TNGA160402GS3 ● 9.525 4.76 0.2 1.5 3.81 60°
NP-TNGA160404FS3 ▲ ● ● ● ● 9.525 4.76 0.4 1.6 3.81 60°
NP-TNGA160404G3 ● 9.525 4.76 0.4 1.6 3.81 60°
EPSR
NP-TNGA160404GA3 ▲ ● ● ● ● 9.525 4.76 0.4 1.6 3.81 60° RE
NP-TNGA160404GH3 ● ● ● 9.525 4.76 0.4 1.6 3.81 60°
NP-TNGA160404GN3 ● 9.525 4.76 0.4 1.6 3.81 60°
D1
232
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
233
CBN & PCD TURNING INSERTS
TN**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
LE
TNGA220404 ● □ 12.7 4.76 0.4 3.7 5.16 60°
D1
TNGA220408 ● □ 12.7 4.76 0.8 3.4 5.16 60°
IC S
TNGA220412 ● □ 12.7 4.76 1.2 3.1 5.16 60°
D1
TNGA160412 ● 9.525 4.76 1.2 3.81 60°
IC S
234
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-VNGA160408GS4 ● ● 9.525 4.76 0.8 2 3.81 35°
NP-VNGA160408TA4 ▲ ● ● 9.525 4.76 0.8 2 3.81 35°
LE
IC S
NP-VNGA160408TH4 ● ● 9.525 4.76 0.8 2 3.81 35°
NP-VNGA160408TS4 ● 9.525 4.76 0.8 2 3.81 35°
NP-VNGA160412FS4 ▲ ● 9.525 4.76 1.2 1.6 3.81 35°
NP-VNGA160412GA4 ▲ ● ● 9.525 4.76 1.2 1.6 3.81 35°
NP-VNGA160412GH4 ● ● ● 9.525 4.76 1.2 1.6 3.81 35°
NP-VNGA160412GS4 ● 9.525 4.76 1.2 1.6 3.81 35°
NP-VNGA160412TA4 ▲ ● ● 9.525 4.76 1.2 1.6 3.81 35°
NP-VNGA160412TH4 ● ● 9.525 4.76 1.2 1.6 3.81 35°
NP-VNGA160402FS2 ● 9.525 4.76 0.2 2.5 3.81 35°
NP-VNGA160402GA2 ● ● 9.525 4.76 0.2 2.5 3.81 35°
NP-VNGA160402GN2 ● 9.525 4.76 0.2 2.5 3.81 35°
NP-VNGA160402GS2 ● 9.525 4.76 0.2 2.5 3.81 35°
NP-VNGA160404FS2 ▲ ● ● ● ● 9.525 4.76 0.4 2.5 3.81 35°
NP-VNGA160404G2 ● 9.525 4.76 0.4 2.5 3.81 35°
NP-VNGA160404GA2 ▲ ● ● ● ● 9.525 4.76 0.4 2.5 3.81 35°
NP-VNGA160404GH2 ● ● ● 9.525 4.76 0.4 2.5 3.81 35° EPSR
NP-VNGA160404GS2 ● ● ● ● 9.525 4.76 0.4 2.5 3.81 35° RE
235
CBN & PCD TURNING INSERTS
VN**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
LE
TNP-VNGA160408T2 ● 9.525 4.76 0.8 2 3.81 35°
IC S
LE
NP-VNMA160404GS ● ● 9.525 4.76 0.4 1.4 3.81 35°
NP-VNMA160404T □ ● ● ● 9.525 4.76 0.4 1.4 3.81 35°
D1
NP-VNMA160408F □ ● ● 9.525 4.76 0.8 1.5 3.81 35°
NP-VNMA160408G ● ● 9.525 4.76 0.8 1.5 3.81 35°
IC S
NP-VNMA160408GS ● ● 9.525 4.76 0.8 1.5 3.81 35°
NP-VNMA160408T □ ● ● ● 9.525 4.76 0.8 1.5 3.81 35°
VNGA160404 □ □ 9.525 4.76 0.4 2.8 3.81 35° EPSR
RE
LE
D1
IC S
236
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
LE
NP-WNGA080408TS6 ● 12.7 4.76 0.8 2.1 5.16 80° IC S
D1
NP-WNGA080408SF3 ● 12.7 4.76 0.8 2.1 5.16 80° LE
IC S
NP-WNGA080408TA3 ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-WNGA080408TH3 ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-WNGA080408TS3 ● ● 12.7 4.76 0.8 2.1 5.16 80°
NP-WNGA080408GAWS3 ● ● 12.7 4.76 0.8 2.1 5.16 80°
EPSR
WIPER RE
D1
NP-WNGA080408GSWS3 ● ● 12.7 4.76 0.8 2.1 5.16 80°
LE
IC S
237
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
MBC020
MB8025
MB4020
BC8020
BC8110
MB810
MB825
MB835
MB710
MB730
WITH Shape REL
HOLE
CW
S
MGTR43200 ● 2.00 3.0 12.7 4.76 2.7 0.2
RER
MGTR43250 ● 2.50 4.5 12.7 4.76 2.7 0.2
IC
MGTR43300 ● 3.00 4.5 12.7 4.76 2.7 0.2
MGTR43350 ● 3.50 4.5 12.7 4.76 2.7 0.2
MGTR43400 ● 4.00 4.5 12.7 4.76 2.7 0.2
238
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITHOUT
HOLE
239
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITHOUT
HOLE
IC S
240
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN Solid CBN
NEG
Inserts
MBC010
MBC020
MBS140
MB8025
MB4020
BC8020
BC8105
BC8120
BC8130
BC8110
Order Number IC S Geometry
MB810
MB825
MB835
MB710
MB730
Shape
WITHOUT
HOLE
241
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
WITHOUT Shape
HOLE
LE
□ □ 9.525 3.18 0.8 4.1 90° RE
SNGN120404 □ □ 12.7 4.76 0.4 4 90°
SNGN120408 ● □ 12.7 4.76 0.8 4.1 90°
242
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
EPSR
Inserts
MBC010
MBC020
MBS140
RE
MB8025
MB4020
LE
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape WITHOUT
HOLE
LE
TNGN160408 ● □ 9.525 4.76 0.8 3.4 60°
IC S
243
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
EPSR
RE
D1
NP-CCGB060204GA2 ● ● 6.35 2.38 0.4 1.9 2.8 80°
AN
LE
7°
IC S
7°
IC S
NP-CCGW060208GS2 ● ● ● ● 6.35 2.38 0.8 2.1 2.8 80°
NP-CCGW060208SE2 ● 6.35 2.38 0.8 2.1 2.8 80°
NP-CCGW060208SF2 ● 6.35 2.38 0.8 2.1 2.8 80°
NP-CCGW060208TA2 ● 6.35 2.38 0.8 2.1 2.8 80°
NP-CCGW060208TS2 ● 6.35 2.38 0.8 2.1 2.8 80°
NP-CCGW09T302FS2 ▲ ● ● ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T302GA2 ▲ ● ● ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T302GN2 ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T302GS2 ● ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T302SE2 ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T302SF2 ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T302TS2 ● 9.525 3.97 0.2 1.8 4.4 80°
NP-CCGW09T304FA2 ● ● 9.525 3.97 0.4 1.9 4.4 80°
NP-CCGW09T304FS2 ▲ ● ● ● ● 9.525 3.97 0.4 1.9 4.4 80°
NP-CCGW09T304G2 ● 9.525 3.97 0.4 1.9 4.4 80°
NP-CCGW09T304GA2 ▲ ● ● ● ● 9.525 3.97 0.4 1.9 4.4 80°
244
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
TNP-CCGW09T308G2 ● 9.525 3.97 0.8 2.1 4.4 80° AN
LE
7°
IC S
AN
LE
IC 7°
S
245
CBN & PCD TURNING INSERTS
CC**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
EPSR
POSI
LE
RE
D1
WITH
HOLE
NP-CCMB060204G ● 6.35 2.38 0.4 1.9 2.8 80°
AN
7°
IC S
LE
D1
NP-CCGW060204F ● 6.35 2.38 0.4 1.9 2.8 80°
NP-CCGW060204G ● ● 6.35 2.38 0.4 1.9 2.8 80° AN
NP-CCGW060204T ● 6.35 2.38 0.4 1.9 2.8 80° IC S
7°
D1
AN
NP-CCMW04T004F ● 4.37 1.79 0.4 1.5 2.4 80° IC S
7°
246
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
CCGW060208FS ● 6.35 2.38 0.8 2.8 80° WITH
CCGW09T304FS ● 9.525 3.97 0.4 4.4 80° HOLE
AN
7°
IC S
CCGW09T308FS ● 9.525 3.97 0.8 4.4 80°
LE
D1
CCMW09T304 □ □ 9.525 3.97 0.4 3.7 4.4 80°
CCMW09T308 □ □ 9.525 3.97 0.8 3.6 4.4 80° AN
CCMW120404 □ □ 12.7 4.76 0.4 3.7 5.5 80° IC S
7°
247
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-CPGB090302GA2 ● 9.525 3.18 0.2 1.8 4.5 80°
NP-CPGB090302GS2 ● ● 9.525 3.18 0.2 1.8 4.5 80° AN
LE
NP-CPGB090302SE2 ● 9.525 3.18 0.2 1.8 4.5 80° IC S 11°
NP-CPGB090304FS2 ● ● ● 9.525 3.18 0.4 1.9 4.5 80°
NP-CPGB090304GA2 ● ● ● ● 9.525 3.18 0.4 1.9 4.5 80°
NP-CPGB090304GS2 ● ● 9.525 3.18 0.4 1.9 4.5 80°
NP-CPGB090304SE2 ● 9.525 3.18 0.4 1.9 4.5 80°
NP-CPGB090304TA2 ● ● 9.525 3.18 0.4 1.9 4.5 80°
NP-CPGB090308FS2 ● ● ● 9.525 3.18 0.8 2.1 4.5 80°
NP-CPGB090308GA2 ● ● ● 9.525 3.18 0.8 2.1 4.5 80°
NP-CPGB090308GS2 ● ● 9.525 3.18 0.8 2.1 4.5 80°
NP-CPGB090308SE2 ● 9.525 3.18 0.8 2.1 4.5 80°
NP-CPGB090308TA2 ● ● 9.525 3.18 0.8 2.1 4.5 80°
NP-CPGB090312FS2 ● 9.525 3.18 1.2 2.3 4.5 80°
NP-CPGB090312GA2 ● ● 9.525 3.18 1.2 2.3 4.5 80°
NP-CPGB090312TA2 ● ● 9.525 3.18 1.2 2.3 4.5 80°
NP-CPMB080204G ● 7.94 2.38 0.4 1.9 3.5 80° EPSR
RE
LE
D1
IC S 11°
248
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-DCGW11T302FS2 ▲ ● ● ● 9.525 3.97 0.2 2.3 4.4 55°
LE
249
CBN & PCD TURNING INSERTS
DC**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
TNP-DCGW11T308G2 ● 9.525 3.97 0.8 2.1 4.4 55°
LE
AN
IC S 7°
D1
BF-DCGT11T308TA2 ● 9.525 3.97 0.8 2 4.4 55°
AN
BF-DCGT11T308TS2 ● 9.525 3.97 0.8 2 4.4 55° LE 7°
IC S
7°
IC S
250
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
LE
RE
D1
NP-DCMW11T304G ● 9.525 3.97 0.4 1.5 4.4 55° AN
7°
IC S
D1
DCGW070208FS ● 6.35 2.38 0.8 2.8 55°
AN
7°
IC S
LE
D1
DCMW11T302 □ □ 9.525 3.97 0.2 3.7 4.4 55°
AN
DCMW11T304 □ □ 9.525 3.97 0.4 3.5 4.4 55° 7°
IC S
251
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
AN
NP-TCGW110208FS3 ● 6.35 2.38 0.8 1.8 2.8 60°
LE 7°
IC S
NP-TCGW110208GA3 ● 6.35 2.38 0.8 1.8 2.8 60°
NP-TCGW110208GS3 ● 6.35 2.38 0.8 1.8 2.8 60°
NP-TCGW110208SE3 ● 6.35 2.38 0.8 1.8 2.8 60°
NP-TCGW110208SF3 ● 6.35 2.38 0.8 1.8 2.8 60°
NP-TCGW110208TS3 ● 6.35 2.38 0.8 1.8 2.8 60°
NP-TCGW130304GA3 ● 7.94 3.18 0.4 1.6 3.4 60°
NP-TCGW130304GS3 ● 7.94 3.18 0.4 1.6 3.4 60°
NP-TCGW130308GA3 ● 7.94 3.18 0.8 1.8 3.4 60°
NP-TCGW130308GS3 ● 7.94 3.18 0.8 1.8 3.4 60°
NP-TCGW16T304GA3 ● 9.525 3.97 0.4 1.6 4.4 60°
NP-TCGW16T304GS3 ● 9.525 3.97 0.4 1.6 4.4 60°
NP-TCGW16T308GA3 ● 9.525 3.97 0.8 1.8 4.4 60°
60°
NP-TCGW16T308GS3 ● 9.525 3.97 0.8 1.8 4.4
252
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
WITH
AN HOLE
7°
TCGW110208FS ● 6.35 2.38 0.8 2.8 60° IC S
LE
D1
AN
TCMW110204 □ □ 6.35 2.38 0.4 2.6 2.8 60°
IC S 7°
253
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
254
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only. CBN
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
INSERTS
Sintered Alloy Dimensions (mm)
Coated CBN CBN
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
D1
NP-TPGX090204GA3 □ 5.56 2.38 0.4 1.6 3.0 60° AN
NP-TPGX090204GS3 ● 5.56 2.38 0.4 1.6 3.0 60° LE 11°
IC S
NP-TPGX090208GA3 □ 5.56 2.38 0.8 1.8 3.0 60°
NP-TPGX110304GA3 □ 6.35 3.18 0.4 1.6 3.5 60°
NP-TPGX110304GS3 ● 6.35 3.18 0.4 1.6 3.5 60°
NP-TPGX110308GA3 □ 6.35 3.18 0.8 1.8 3.5 60°
NP-TPGX110308GS3 ● 6.35 3.18 0.8 1.8 3.5 60°
NP-TPMB080204G ● 4.76 2.38 0.4 1.6 2.4 60°
EPSR
NP-TPMB090204G ● 5.56 2.38 0.4 1.6 2.9 60° LE RE
NP-TPMB110304G ● 6.35 3.18 0.4 1.6 3.4 60°
D1
AN
11°
NP-TPMB160304G ● 9.525 3.18 0.4 1.6 4.4 60° IC S
255
CBN & PCD TURNING INSERTS
TP**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
LE
TPGX090208 □ □ 5.56 2.38 0.8 2.3 3.0 60°
D1
TPGX110302 □ □ 6.35 3.18 0.2 2.8 3.5 60° AN
TPGX110304 ● ● ● 6.35 3.18 0.4 2.6 3.5 60° 11°
IC S
TPGX110308 ● ● ● 6.35 3.18 0.8 2.3 3.5 60°
TPGX160304 ● □ 9.525 3.18 0.4 3.7 4.8 60°
TPGX160308 ● □ 9.525 3.18 0.8 3.4 4.8 60°
TPGX160404 □ □ 9.525 4.76 0.4 3.7 4.8 60°
TPGX160408 □ □ 9.525 4.76 0.8 3.4 4.8 60°
256
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-VBGW160402GA2 ● 9.525 4.76 0.2 2.5 4.43 35°
NP-VBGW160402GS2 ● ● 9.525 4.76 0.2 2.5 4.43 35°
LE
AN
NP-VBGW160404FS2 ▲ ● ● 9.525 4.76 0.4 2.5 4.43 35° 5°
IC S
NP-VBGW160404GA2 ▲ ● ● ● ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160404GH2 ● ● ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160404GS2 ● ● ● ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160404SE2 ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160404SF2 ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160404TA2 ● ● 9.525 4.76 0.4 1.4 4.43 35°
NP-VBGW160404TH2 ● ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160404TS2 ● 9.525 4.76 0.4 2.5 4.43 35°
NP-VBGW160408FS2 ▲ ● ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408GA2 ▲ ● ● ● ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408GH2 ● ● ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408GS2 ● ● ● ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408SE2 ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408SF2 ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408TA2 ● ● 9.525 4.76 0.8 1.5 4.43 35°
NP-VBGW160408TH2 ● ● 9.525 4.76 0.8 2 4.43 35°
NP-VBGW160408TS2 ● 9.525 4.76 0.8 2 4.43 35°
257
CBN & PCD TURNING INSERTS
VB**
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
CBN : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
INSERTS
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
LE
POSI
D1
WITH
HOLE NP-VBGW160408G ● 9.525 4.76 0.8 2 4.43 35°
AN
IC S 5°
258
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
D1
NP-VCGW160404TS2 ● 9.525 4.76 0.4 2.5 4.4 35°
NP-VCGW160408FS2 ▲ ● ● 9.525 4.76 0.8 2 4.4 35°
LE
AN
NP-VCGW160408GA2 ▲ ● ● ● ● 9.525 4.76 0.8 2 4.4 35° 7°
IC S
NP-VCGW160408GH2 ● ● ● 9.525 4.76 0.8 2 4.4 35°
NP-VCGW160408GS2 ● ● 9.525 4.76 0.8 2 4.4 35°
NP-VCGW160408TA2 ● ● 9.525 4.76 0.8 2 4.4 35°
NP-VCGW160408TH2 ● ● 9.525 4.76 0.8 2 4.4 35°
NP-VCGW160408TS2 ● 9.525 4.76 0.8 2 4.4 35°
259
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
D1
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITH
HOLE
LE
RE
D1
NP-WCMWL30208FA ● 4.76 2.38 0.8 2.1 2.3 80° AN
7°
IC S
260
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITHOUT
HOLE
LE
RE
SPGN090312 □ □ 9.525 3.18 1.2 4.1 90°
SPGN120304 ● ● 12.7 3.18 0.4 4 90°
SPGN120308 ● ● 12.7 3.18 0.8 4.1 90° AN
IC S 11°
SPGN120312 □ □ 12.7 3.18 1.2 4.1 90°
SPGN120408 □ □ 12.7 4.76 0.8 4.1 90°
SPGN120412 □ □ 12.7 4.76 1.2 4.1 90°
261
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITHOUT
HOLE
262
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
EPSR
Inserts
MBC010
MBC020
RE
MB8025
MB4020
LE
BC8020
BC8105
BC8120
BC8130
BC8110
IC
Order Number Geometry
MB810
MB825
MB835
MB710
MB730
S
Shape
WITHOUT
HOLE
LE
TPGN110308 □ □ 6.35 3.18 0.8 2.3 60°
TPGN160304 ● ● 9.525 3.18 0.4 3.7 60°
AN
TPGN160308 ● ● 9.525 3.18 0.8 3.4 60°
11°
IC S
TPGN160312 □ □ 9.525 3.18 1.2 3.1 60°
TPGN160408 □ □ 9.525 4.76 0.8 3.4 60°
TPGN220408 □ □ 12.7 4.76 0.8 3.4 60°
263
CBN & PCD TURNING INSERTS
Stock status indication (1 insert in one case TNP-**:The order number is for a 10-insert pack. ) :
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
Inserts RER ANR
MBC010
MBC020
MB8025
MB4020
BC8020
BC8105
BC8120
BC8130
BC8110
Order Number CW L LE Geometry
MB810
MB825
MB835
MB710
MB730
Shape REL ANL
WITHOUT
HOLE
CW
GY1G0300F020N-GFGS ● ● 3.0 0.2 20.7 2.7 7°
RER
GY1G0318F020N-GFGS ● ● 3.18 0.2 20.7 2.7 7° ANL ANR
GY1G0400G020N-GFGS ● ● 4.0 0.2 25.65 2.7 7°
GY1G0475H020N-GFGS ● ● 4.75 0.2 25.65 2.7 7° L
AN 7°
GY1G0500H020N-GFGS ● ● 5.0 0.2 25.65 2.7 7°
GY1G0600J020N-GFGS ● 6.0 0.2 25.65 2.7 7°
264
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
H Hardened Materials
K Cast iron
Work Material
S Heat-resistant Alloy, Titanium Alloy
Sintered Alloy Dimensions (mm)
Coated CBN CBN
POSI
Inserts
MBC010
MBC020
MB8025
MB4020
BC8020
BC8105
BC8120
BC8130
BC8110
Order Number IC S10 S D4 Geometry
MB810
MB825
MB835
MB710
MB730
Shape
WITHOUT
HOLE
S10
RTG08A ● 8 5 11 4.5
S
D4
265
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
NEG
NP-CNMM120402L-F □ 12.7 4.76 0.2 1.8 5.16 80°
WITH EPSR
NP-CNMM120402R-F ● 12.7 4.76 0.2 1.8 5.16 80°
LE
HOLE RE
R/L-F
NP-CNMM120404L-F □ 12.7 4.76 0.4 1.9 5.16 80°
D1
NP-CNMM120404R-F ● 12.7 4.76 0.4 1.9 5.16 80°
NP-CNMM120408L-F □ 12.7 4.76 0.8 2.1 5.16 80°
IC S
NP-CNMM120408R-F ● 12.7 4.76 0.8 2.1 5.16 80°
LE
D1
CNMA120408 ● 12.7 4.76 0.8 3.6 5.16 80°
IC S
266
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
NEG
NP-DNMM150402L-F □ 12.7 4.76 0.2 1.5 5.16 55° EPSR
WITH
NP-DNMM150402R-F ● 12.7 4.76 0.2 1.5 5.16 55°
LE
RE
HOLE
R/L-F NP-DNMM150404L-F □ 12.7 4.76 0.4 1.5 5.16 55°
NP-DNMM150404R-F ● 12.7 4.76 0.4 1.5 5.16 55°
D1
NP-DNMM150408L-F □ 12.7 4.76 0.8 1.7 5.16 55°
LE
D1
DNGA150408 ● 12.7 4.76 0.8 2.5 5.16 55°
IC S
267
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
NEG
NP-SNMM120404L-F □ 12.7 4.76 0.4 2.1 5.16 90°
WITH EPSR
HOLE R/L-F NP-SNMM120404R-F ● 12.7 4.76 0.4 2.1 5.16 90°
RE
LE
NP-SNMM120408L-F □ 12.7 4.76 0.8 2.3 5.16 90°
D1
NP-SNMM120408R-F ● 12.7 4.76 0.8 2.3 5.16 90° IC S
LE
RE
D1
SNGA120408 ● 12.7 4.76 0.8 3.8 5.16 90°
IC S
268
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
NEG
NP-TNMM160402L-F □ 9.525 4.76 0.2 1.5 3.81 60°
EPSR WITH
NP-TNMM160402R-F ● 9.525 4.76 0.2 1.5 3.81 60° HOLE
R/L-F RE
LE
NP-TNMM160404L-F □ 9.525 4.76 0.4 1.6 3.81 60°
NP-TNMM160404R-F ● 9.525 4.76 0.4 1.6 3.81 60°
D1
NP-TNMM160408L-F □ 9.525 4.76 0.8 1.8 3.81 60°
IC S
NP-TNMM160408R-F ● 9.525 4.76 0.8 1.8 3.81 60°
LE
D1
TNGA160408 ● 9.525 4.76 0.8 2.8 3.81 60°
IC S
269
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
NEG
NP-VNMM160402L-F □ 9.525 4.76 0.2 1.3 3.81 35° EPSR
WITH
NP-VNMM160402R-F ● 9.525 4.76 0.2 1.3 3.81 35° RE
LE
HOLE
R/L-F NP-VNMM160404L-F □ 9.525 4.76 0.4 1.4 3.81 35°
D1
NP-VNMM160404R-F ● 9.525 4.76 0.4 1.4 3.81 35°
NP-VNMM160408L-F □ 9.525 4.76 0.8 1.5 3.81 35°
LE
D1
VNGA160408 ● 9.525 4.76 0.8 1.8 3.81 35°
IC S
270
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE EPSR Geometry
Shape
NEG
SNGN120404 □ 12.7 4.76 0.4 3.8 90°
EPSR WITHOUT
LE
RE HOLE
IC S
271
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
NP-CCMH060202 ● 6.35 2.38 0.2 1.8 2.8 80°
WITH EPSR
RE
LE
HOLE
D1
NP-CCMH060204 ● 6.35 2.38 0.4 1.9 2.8 80°
AN
IC S 7°
LE
NP-CCMW04T002 ● 4.37 1.79 0.2 1.8 2.4 80°
D1
AN
NP-CCMW04T004 ● 4.37 1.79 0.4 1.9 2.4 80° 7°
IC S
LE
CCMW09T302 ● 9.525 3.97 0.2 3.3 4.4 80°
D1
AN
CCMW09T304 ● 9.525 3.97 0.4 3.3 4.4 80° 7°
IC S
272
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
NP-CPMH080202 ● 7.94 2.38 0.2 1.8 3.5 80°
EPSR WITH
NP-CPMH080204 ● 7.94 2.38 0.4 1.9 3.5 80° RE
LE
HOLE
NP-CPMH090302 ● 9.525 3.18 0.2 1.8 4.5 80°
D1
AN
NP-CPMH090304 ● 9.525 3.18 0.4 1.9 4.5 80° 11°
IC S
LE
D1
CPGT090302 ● 9.525 3.18 0.2 3.3 4.4 80°
AN
CPGT090304 ● 9.525 3.18 0.4 3.3 4.4 80°
IC S 11°
273
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
NP-DCMT070202L-F ● 6.35 2.38 0.2 1.5 2.8 55°
WITH EPSR
HOLE NP-DCMT070202R-F ● 6.35 2.38 0.2 1.5 2.8 55°
LE
RE
NP-DCMT070204L-F ● 6.35 2.38 0.4 1.5 2.8 55°
R/L-F
D1
NP-DCMT070204R-F ● 6.35 2.38 0.4 1.5 2.8 55°
NP-DCMT11T302L-F ● 9.525 3.97 0.2 1.5 4.4 55°
NP-DCMT11T302R-F ● 9.525 3.97 0.2 1.5 4.4 55° AN
7°
IC S
NP-DCMT11T304L-F ● 9.525 3.97 0.4 1.5 4.4 55°
NP-DCMT11T304R-F ● 9.525 3.97 0.4 1.5 4.4 55°
DCMW070202 ● 6.35 2.38 0.2 2.7 2.8 55° EPSR
DCMW070204 ● 6.35 2.38 0.4 2.6 2.8 55° RE
LE
DCMW11T302 ● 9.525 3.97 0.2 3 4.4 55°
D1
AN
DCMW11T304 ● 9.525 3.97 0.4 2.9 4.4 55° 7°
IC S
274
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
SPGX090304 ● 9.525 3.18 0.4 3.8 4.8 90°
EPSR WITH
HOLE
LE
RE
D1
SPGX090308 ● 9.525 3.18 0.8 3.8 4.8 90°
AN
11°
IC S
275
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
TCMW110202 ● 6.35 2.38 0.2 2.8 2.8 60°
WITH EPSR
HOLE RE
LE
D1
AN
TCMW110204 ● 6.35 2.38 0.4 2.6 2.8 60°
7°
IC S
LE
D1
AN
TCGW060108 ● 3.97 1.59 0.8 1.4 2.3 60°
IC S 7°
276
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
NP-TPMX090202L-F ● 5.56 2.38 0.2 1.5 3.0 60°
WITH
NP-TPMX090202R-F ● 5.56 2.38 0.2 1.5 3.0 60° HOLE
NP-TPMX090204L-F ● 5.56 2.38 0.4 1.6 3.0 60°
NP-TPMX090204R-F □ 5.56 2.38 0.4 1.6 3.0 60°
NP-TPMX090208L-F ● 5.56 2.38 0.8 1.8 3.0 60°
NP-TPMX090208R-F □ 5.56 2.38 0.8 1.8 3.0 60°
NP-TPMX110302L-F ● 6.35 3.18 0.2 1.5 3.5 60°
RE
LE
R/L-F NP-TPMX110302R-F □ 6.35 3.18 0.2 1.5 3.5 60°
D1
NP-TPMX110304L-F ● 6.35 3.18 0.4 1.6 3.5 60°
AN
NP-TPMX110304R-F □ 6.35 3.18 0.4 1.6 3.5 60°
11°
NP-TPMX110308L-F ● 6.35 3.18 0.8 1.8 3.5 60° IC S
NP-TPMX110308R-F □ 6.35 3.18 0.8 1.8 3.5 60°
NP-TPMX160302L-F ● 9.525 3.18 0.2 1.5 4.8 60°
NP-TPMX160302R-F □ 9.525 3.18 0.2 1.5 4.8 60°
NP-TPMX160304L-F ● 9.525 3.18 0.4 1.6 4.8 60°
NP-TPMX160304R-F □ 9.525 3.18 0.4 1.6 4.8 60°
NP-TPMX160308L-F ● 9.525 3.18 0.8 1.8 4.8 60°
NP-TPMX160308R-F □ 9.525 3.18 0.8 1.8 4.8 60°
NP-TPMH080202L-F ● 4.76 2.38 0.2 1.5 2.4 60°
NP-TPMH080202R-F ● 4.76 2.38 0.2 1.5 2.4 60°
NP-TPMH080204L-F ● 4.76 2.38 0.4 1.6 2.4 60°
NP-TPMH080204R-F ● 4.76 2.38 0.4 1.6 2.4 60°
NP-TPMH090202L-F ● 5.56 2.38 0.2 1.5 2.9 60°
NP-TPMH090202R-F ● 5.56 2.38 0.2 1.5 2.9 60°
RE
NP-TPMH090204L-F ●
LE
AN
11°
TPGT160304R-F ● 9.525 3.18 0.4 3 4.4 60° IC S
277
CBN & PCD TURNING INSERTS
TP**
Stock status indication (1 insert in one case ) :
PCD : Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
CBN & PCD TURNING
Inserts
Order Number IC S RE LE D1 EPSR Geometry
MD220
Shape
LE
TPGV090204R-F ●
D1
5.56 2.38 0.4 2.6 2.8 60°
POSI
TPGV110302L-F ● 6.35 3.18 0.2 2.8 3.4 60° AN
WITH TPGV110302R-F ● 6.35 3.18 0.2 2.8 3.4 60° 11°
IC S
HOLE
TPGV110304L-F ● 6.35 3.18 0.4 2.6 3.4 60°
TPGV110304R-F ● 6.35 3.18 0.4 2.6 3.4 60°
TPGX080202 ● 4.76 2.38 0.2 1.9 2.5 60°
TPGX080204 ● 4.76 2.38 0.4 1.7 2.5 60°
TPGX080208 ● 4.76 2.38 0.8 1.4 2.5 60°
TPGX090202 ● 5.56 2.38 0.2 2.8 3.0 60° EPSR
RE
LE
TPGX090204 ● 5.56 2.38 0.4 2.6 3.0 60°
D1
TPGX090208 ● 5.56 2.38 0.8 2.3 3.0 60° AN
TPGX110302 ● 6.35 3.18 0.2 2.8 3.5 60°
IC S 11°
TPGX110304 ● 6.35 3.18 0.4 2.6 3.5 60°
TPGX110308 ● 6.35 3.18 0.8 2.3 3.5 60°
TPGX160304 ● 9.525 3.18 0.4 3 4.8 60°
TPGX160308 ● 9.525 3.18 0.8 2.7 4.8 60°
278
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
NP-VBGT110301R-F ● 6.35 3.18 0.1 2.6 2.85 35° EPSR
WITH
NP-VBGT110302R-F ● 6.35 3.18 0.2 2.6 2.85 35° RE
LE
HOLE
NP-VBGT110304R-F ● 6.35 3.18 0.4 2.5 2.85 35°
D1
R/L-F
279
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
NP-VCGT080201R-F ● 4.76 2.38 0.1 2.6 2.4 35°
WITH EPSR
HOLE NP-VCGT080202R-F ● 4.76 2.38 0.2 2.6 2.4 35° RE
LE
NP-VCGT080204R-F ● 4.76 2.38 0.4 2.5 2.4 35°
D1
R/L-F NP-VCGT0802V5R-F ● 4.76 2.38 0.05 2.5 2.4 35°
NP-VCGT110301R-F ● 6.35 3.18 0.1 2.6 2.8 35°
AN
NP-VCGT110302R-F ● 6.35 3.18 0.2 2.6 2.8 35°
7°
NP-VCGT110304R-F ● 6.35 3.18 0.4 2.5 2.8 35° IC S
280
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
WCMW040202 ● 6.35 2.38 0.2 2.9 2.8 80°
EPSR WITH
WCMW040204 □ 6.35 2.38 0.4 3 2.8 80° HOLE
RE
LE
WCMW06T304 ● 9.525 3.97 0.4 3 4.4 80°
D1
WCMW06T308 □ 9.525 3.97 0.8 3.3 4.4 80°
WCMWL30202 ● 4.76 2.38 0.2 1.6 2.3 80° AN
11°
IC S
WCMWL30204 □ 4.76 2.38 0.4 1.7 2.3 80°
281
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
WPGT040202 ● 6.35 2.38 0.2 2.9 2.8 80°
WITH EPSR
HOLE WPGT040204 ● 6.35 2.38 0.4 2.9 2.8 80°
RE
LE
WPGT060302 ● 9.525 3.18 0.2 3.3 4.4 80°
D1
AN
WPGT060304 ● 9.525 3.18 0.4 3.3 4.4 80° IC S 11°
282
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
DEGX150402L-F ● 12.7 4.76 0.2 3 5.1 55° EPSR
RE WITH
DEGX150402R-F ● 12.7 4.76 0.2 3 5.1 55° HOLE
LE
DEGX150404L-F ● 12.7 4.76 0.4 2.9 5.1 55°
D1
R/L-F
283
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
TEGX160302L ● 9.525 3.18 0.2 3.8 4.4 60°
WITH
HOLE TEGX160302R ● 9.525 3.18 0.2 3.8 4.4 60° EPSR
R/L RE
LE
TEGX160304L ● 9.525 3.18 0.4 3.7 4.4 60°
D1
AN
TEGX160304R ● 9.525 3.18 0.4 3.7 4.4 60° 20°
IC S
LE
D1
TEGX160304 ● 9.525 3.18 0.4 3 4.4 60° AN
20°
IC S
284
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE D1 EPSR Geometry
Shape
POSI
VDGX160302L-F ● 9.525 3.18 0.2 3.1 4.5 35° EPSR
RE WITH
VDGX160302R-F ● 9.525 3.18 0.2 3.1 4.5 35°
LE
HOLE
VDGX160304L-F ● 9.525 3.18 0.4 2.7 4.5 35°
D1
R/L-F
285
CBN & PCD TURNING INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE EPSR Geometry
Shape
POSI
SPGN090302 ● 9.525 3.18 0.2 3.8 90°
WITHOUT EPSR
HOLE SPGN090304 ● 9.525 3.18 0.4 3.8 90°
LE
RE
SPGN090308 ● 9.525 3.18 0.8 3.8 90°
SPGN090312 □ 9.525 3.18 1.2 3.8 90°
AN
SPGN120304 ● 12.7 3.18 0.4 3.8 90°
11°
IC S
SPGN120308 ● 12.7 3.18 0.8 3.8 90°
SPGN120312 ● 12.7 3.18 1.2 3.8 90°
286
CBN & PCD TURNING INSERTS
INSERTS
: Inventory maintained in Japan. [: This item to be discontinued within two years. r: Non stock, produced to order only.
Cutting Conditions (Guide) : : Stable Cutting : General Cutting : Unstable Cutting
Work Material N Non-Ferrous Metal Dimensions (mm)
PCD
Inserts
Order Number MD220 IC S RE LE EPSR Geometry
Shape
POSI
TPGN110302 ● 6.35 3.18 0.2 2.8 60°
EPSR WITHOUT
TPGN110304 ● 6.35 3.18 0.4 2.6 60°
RE HOLE
LE
TPGN110308 ● 6.35 3.18 0.8 2.3 60°
TPGN160302 ● 9.525 3.18 0.2 3.1 60°
AN
TPGN160304 ● 9.525 3.18 0.4 3 60°
TPGN160308 ● 9.525 3.18 0.8 2.7 60° IC S 11°
287
288
TURNING TOOLS
EXTERNAL TURNING
TOOLS
IDENTIFICATION ................................ 290 DC .................................................. 323
METHOD OF HOLDING....................... 291 RC .................................................. 325
STANDARD HOLDERS........................ 292 SC................................................... 329
CN .................................................. 296 TC................................................... 330
DN .................................................. 300 VC................................................... 331
SN................................................... 303 XC................................................... 334
TN................................................... 310 DE................................................... 336
VN................................................... 314 TE ................................................... 338
WN.................................................. 320 VD................................................... 340
CC .................................................. 322 TL ................................................... 341
289
EXTERNAL TURNING TOOLS
IDENTIFICATION
y LL Type, Double Clamp Type,
SP Type, Profile Holder, AL Type
P C L N R 25 25 M 12
z x c v b n n m ,
EXTERNAL TURNING
zClamp Structure cCutting Angle vInsert Clearance bHand of Tool mTool Length ,Cutting Edge Length (mm)
TOOLS
D Double Clamp Type A 90°Without Offset C 7°Positive R Right Hand (mm) Insert Shape
Inscribed
M
Wedge Lock Type B 75° N Negative L Left Hand D 60 Circle Square Triangular Round Rhombic Rhombic Rhombic
Multiple Clamp Type 80° 55° 35°
D 45°Neutral E 20°Positive N Neutral E 70
P Lever Lock Type 6.00 – – 06 – – –
E 60° F 80
S Screw-on Type 6.35 – 11 – 06 07 11
F 90° H 100
7.94 – 13 – – – –
G 90°With Offset K 125
nTool Size (mm) 8.00 – – 08 – – –
H 107°30´ M 150
(Height and Width) 9.525 09 16 – 09 11 16
J 93° P 170
8 08 10.00 – – 10 – – –
K 75° Q 180
10 10 12.00 – – 12 – – –
L 95° R 200
12 12 12.70 12 22 – 12 15 –
N 62°30´
xInsert Shape 16 16 15.875 15 27 – 16 – –
P 117°30´
C Rhombic 80° 20 20 16.00 – – 16 – – –
Q 105°
D Rhombic 55° 25 25 19.05 19 – – 19 – –
S 45°
R Round 32 32 20.00 – – 20 – – –
T 60°
S Square 25.00 – – 25 – – –
V 72°30´
T Triangular 25.40 25 – – – – –
Z Special
V Rhombic 35° 32.00 – – 32 – – –
W Trigon
X Special Design
290
EXTERNAL TURNING TOOLS
METHOD OF HOLDING
Type (Holder) Structure
Lever Lock b
zClamp Screw
(LL HOLDER) b z xLever v
cShim c
x
EXTERNAL TURNING
vShim Pin
c
bInsert
v
TOOLS
x z
Double Clamp b
b
v zShim v
DOUBLE CLAMP n c
xShim Pin
n
c
HOLDER cSpring
z vClamp Bridge x
bClamp Screw
x
nInsert z
Multiple Clamp b v
v c zShim
DOUBLE CLAMP b xShim Pin
c
x
HOLDER cClamp Screw
(For heavy cutting) z vClamp Bridge
x bInsert z
Wedge Lock n
bv zShim b
(WP HOLDER) m
n
c xShim Pin m v
cPlate
c
vSpring
x
z bClamp Bridge
x
nClamp Screw z
mInsert
Screw-on z
x
zInsert
SP HOLDER xClamp Screw
z
AL HOLDER
x
Pin lock b z v b
zLock Pin
(MP HOLDER) xShim z
x cStop Ring x
vLock Screw
c
c bInsert
v
291
EXTERNAL TURNING TOOLS
CLASSIFICATION
External Turning External Turning
External Turning External Turning
Facing Copying
KAPR=63.5°
KAPR=95° KAPR=93° KAPR=90° KAPR=75°
Features 72.5°
Tool Holder
Shank Size
(H x W x L)
EXTERNAL TURNING
LL Holder a
a
a
Lever lock type.
ISO standard.
Various holder shapes.
a Suitable for light to
heavy cutting.
a Economical negative
insert.
10 x 10 x 70 25 x 25 x 150
12 x 12 x 80 32 x 25 x 170
16 x 16 x 100 32 x 32 x 170
20 x 20 x 125 PCLN PWLN PDJN PTGN PCBN PSBN
^ 296 ^ 320 ^ 300 ^ 310 ^ 299 ^ 303
DOUBLE a
a
New double clamp type.
Holds inserts securely.
CLAMP
Holder
a
a
Excellent cutting edge
tolerance.
Economical negative
insert.
a Small insert series.
16 x 16 x 100 25 x 25 x 150
20 x 20 x 125 32 x 25 x 170
CLAMP
Holder
a
a
Holds inserts securely.
Suitable for heavy
cutting.
(For heavy cutting) a Negative insert.
32 x 32 x 170
40 x 40 x 200
MCLN MSBN
^ 298 ^ 304
MTJN
^ 313
SP Holder a
a
Screw-on type.
Miniature holder with
7°positive insert.
8 x 8 x 60
10 x 10 x 70
12 x 12 x 80
16 x 16 x 100
20 x 20 x 125
25 x 25 x 150
292
EXTERNAL TURNING TOOLS
CLASSIFICATION
External Turning, External Turning, Facing, External Turning,
External Turning External Turning Facing Selection Standard
Chamfering Facing, Chamfering Copying Copying
Operation Efficiency
Clamp Rigidity
Special Design
Economical
Specialised
EXTERNAL TURNING
PSIR
(Sharpness)
PSIR PSIR
KAPR KAPR KAPR
KAPR
TOOLS
e ue
PTGN PCBN PSBN PSTN PSDN PSSN PSKN PTFN PDHN PRGC PRDC
^ 310 ^ 299 ^ 303 ^ 305 ^ 308 ^ 306 ^ 309 ^ 312 ^ 302 ^ 325 ^ 326
e ee
DTGN DVPN
^ 311 ^ 318
MSBN MSSN
^ 304 ^ 307
e ee
293
EXTERNAL TURNING TOOLS
CLASSIFICATION
External Turning, External Turning,
External Turning External Turning
Facing Copying
KAPR=62.5°
KAPR=99° ─ 95° KAPR=93° KAPR=90° KAPR=95° KAPR=75°
Features 72.5°
Tool Holder
Shank Size
(H x W x L)
EXTERNAL TURNING
Profile Holder a
a
a
Screw-on type.
25° rhombic shape insert.
Possible to machine a
face relief with up to 60º
inclination.
16 x 16 x 100
20 x 20 x 125
25 x 25 x 150
MP Holder a
a
a
Pin lock type.
35°rhombic shape insert.
Suitable for recessing.
20 x 20 x 125
25 x 25 x 150
PVJN PVVN
^ 314 ^ 317
AL Holder a
a
Screw-on type.
20°positive insert.
(35°rhombic shape
insert is 15°)
a High rake and good
sharpness.
16 x 16 x 100
20 x 20 x 125
25 x 25 x 150
TL Holder a
a
Taper lock type
Excellent finished surface
with round shape insert.
20 x 20 x 125
25 x 25 x 150
32 x 25 x 170
SMALL a
a
Screw-on type.
Tools to be equipped on
TOOLS
(Tools for front turning)
a
gang type tool posts.
Miniature holder with
7°positive insert.
8 x 8 x 125
10 x 10 x 125
12 x 12 x 150
16 x 16 x 150
SMALL a
a
Screw-on type.
Tools to be equipped on
TOOLS
(Tools for back turning)
a
gang type tool posts.
High rigidity due to designing of
vertical insert. (BTA/CTB type)
Back machining.
a (BTA/CTB type)
8 x 10 x 120
10 x 10 x 120
12 x 12 x 120
16 x 16 x 120
294
EXTERNAL TURNING TOOLS
CLASSIFICATION
External Turning, Facing, External Turning,
External Turning External Turning Facing Selection Standard
Chamfering Copying Copying
Operation Efficiency
Clamp Rigidity
PSIR
Special Design
Economical
Specialised
EXTERNAL TURNING
(Sharpness)
PSIR
KAPR
KAPR PSIR
KAPR
TOOLS
ee
SXZC
^ 334
e e
PVPN
^ 319
e e
STGE STFE
^ 338 ^ 339
u e
TLHR
^ 341
Special Design
295
EXTERNAL TURNING TOOLS
PCLN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 102 CBN TURNING INSERTS >> 222
95° PCD TURNING INSERTS >> 266 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH LF
LAMS
TOOLS
GAMO 6°
6°
95°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
(09,12,16,
(12) (12) (12,16,19) (12,16,19) (12) (12,16,19) (12)
19)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
296
EXTERNAL TURNING TOOLS
EXTERNAL TURNING
WF
B
KAPR
LH LF
GAMF GAMP
TOOLS
6° 6°
95°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
LLSCN3T3
DCLNR1616H09 ● R CN**09T3 16 16 100 25 16 20 95°
(LLSCN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSCN3T3
DCLNR2020K09 ● R CN**09T3 20 20 125 25 20 25 95°
(LLSCN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DCLNR2020K12 ● R CN**1204 20 20 125 29 20 25 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
LLSCN3T3
DCLNR2525M09 ● R CN**09T3 25 25 150 25 25 32 95°
(LLSCN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DCLNR2525M12 ● R CN**1204 25 25 150 29 25 32 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
DCLNR3225P12 ● R CN**1204 32 25 170 29 32 32 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
LLSCN3T3
DCLNL1616H09 ● L CN**09T3 16 16 100 25 16 20 95°
(LLSCN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSCN3T3
DCLNL2020K09 ● L CN**09T3 20 20 125 25 20 25 95°
(LLSCN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DCLNL2020K12 ● L CN**1204 20 20 125 29 20 25 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
LLSCN3T3
DCLNL2525M09 ● L CN**09T3 25 25 150 25 25 32 95°
(LLSCN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DCLNL2525M12 ● L CN**1204 25 25 150 29 25 32 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
DCLNL3225P12 ● L CN**1204 32 25 170 29 32 32 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
297
EXTERNAL TURNING TOOLS
Double clamp holder for
MCLN heavy cutting
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 102 CBN TURNING INSERTS >> 222
95° PCD TURNING INSERTS >> 266 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH
GAMF LF
TOOLS
6° GAMP
6°
95°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
298
EXTERNAL TURNING TOOLS
PCBN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
External turning
Product Information TURNING INSERTS >> 102 CBN TURNING INSERTS >> 222
75° PCD TURNING INSERTS >> 266 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LAMS LH LF
TOOLS
6°
GAMO
6°
HF
75°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
299
EXTERNAL TURNING TOOLS
PDJN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 108 CBN TURNING INSERTS >> 226
93° PCD TURNING INSERTS >> 267 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
GAMO LAMS KAPR
6° 6° LH LF
HF
TOOLS
93°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
LLSDN43
PDJNR2020K15 ● R DN**1504 20 20 125 35 20 25 93°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDJNR2525M15 ● R DN**1504 25 25 150 35 25 32 93°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDJNR3225P15 ● R DN**1504 32 25 170 35 32 32 93°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDJNL2020K15 ● L DN**1504 20 20 125 35 20 25 93°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDJNL2525M15 ● L DN**1504 25 25 150 35 25 32 93°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDJNL3225P15 ● L DN**1504 32 25 170 35 32 32 93°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
300
EXTERNAL TURNING TOOLS
EXTERNAL TURNING
WF
B
KAPR
LH
GAMF GAMP LF
TOOLS
6°
93° 6°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
DDJNR1616H11 ● R DN**1104 16 16 100 28 16 20 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
DDJNR2020K11 ● R DN**1104 20 20 125 28 20 25 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSDN43
DDJNR2020K15 ● R DN**1504 20 20 125 37 20 25 93°
(LLSDN42)
LLP24 DCK2613 DCS1 DC0621T TKY20F
DDJNR2525M11 ● R DN**1104 25 25 150 28 25 32 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSDN43
DDJNR2525M15 ● R DN**1504 25 25 150 37 25 32 93°
(LLSDN42)
LLP24 DCK2613 DCS1 DC0621T TKY20F
DDJNR3225P11 ● R DN**1104 32 25 170 28 32 32 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSDN43
DDJNR3225P15 ● R DN**1504 32 25 170 37 32 32 93°
(LLSDN42)
LLP24 DCK2613 DCS1 DC0621T TKY20F
DDJNL1616H11 ● L DN**1104 16 16 100 28 16 20 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
DDJNL2020K11 ● L DN**1104 20 20 125 28 20 25 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSDN43
DDJNL2020K15 ● L DN**1504 20 20 125 37 20 25 93°
(LLSDN42)
LLP24 DCK2613 DCS1 DC0621T TKY20F
DDJNL2525M11 ● L DN**1104 25 25 150 28 25 32 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSDN43
DDJNL2525M15 ● L DN**1504 25 25 150 37 25 32 93°
(LLSDN42)
LLP24 DCK2613 DCS1 DC0621T TKY20F
DDJNL3225P11 ● L DN**1104 32 25 170 28 32 32 93° LLSDN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSDN43
DDJNL3225P15 ● L DN**1504 32 25 170 37 32 32 93°
(LLSDN42)
LLP24 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
301
EXTERNAL TURNING TOOLS
PDHN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
Facing, Copying
Product Information TURNING INSERTS >> 108 CBN TURNING INSERTS >> 226
107° PCD TURNING INSERTS >> 267 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH LF
LAMS
8°
TOOLS
107° GAMO
HF
8°
30´
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
LLSDN43
PDHNR2020K15 ● R DN**1504 20 20 125 34 20 25 107.5°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDHNR2525M15 ● R DN**1504 25 25 150 34 25 32 107.5°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDHNR3225P15 ● R DN**1504 32 25 170 34 32 32 107.5°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDHNL2020K15 ● L DN**1504 20 20 125 34 20 25 107.5°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDHNL2525M15 ● L DN**1504 25 25 150 34 25 32 107.5°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
LLSDN43
PDHNL3225P15 ● L DN**1504 32 25 170 34 32 32 107.5°
(LLSDN42)
LLP14 LLCL24 LLCS108 HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
302
EXTERNAL TURNING TOOLS
PSBN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
External turning
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
75° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
LAMS KAPR
GAMO 6° LH LF
TOOLS
6°
HF
75°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
Shim Shim Pin Lever Spring Clamp Lever Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
303
EXTERNAL TURNING TOOLS
Double clamp holder for
MSBN heavy cutting
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
External turning
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
75° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF
EXTERNAL TURNING
B
KAPR
LH
GAMF LF
TOOLS
6° GAMP
6°
HF
H
75°
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
304
EXTERNAL TURNING TOOLS
PSTN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Chamfering
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
60° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
LAMS
6° KAPR
LH LF
HF
TOOLS
GAMO
6°
60°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
305
EXTERNAL TURNING TOOLS
PSSN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing,
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
45° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF2
EXTERNAL TURNING
WF
B
LAMS KAPR
0° LH H
LF
TOOLS
GAMO
45° 8°
H
F
KAPR
Stock
WF2
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• When using insert with right or left hand breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
• Clamp Torque(N • m) : LLCS106=2.2, LLCS108=3.3, LLCS508=3.3, LLCS310=7.0
• : Inventory maintained in Japan.
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
306
EXTERNAL TURNING TOOLS
Double clamp holder for
MSSN heavy cutting
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing,
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
45° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF2
EXTERNAL TURNING
WF
B
KAPR
GAMF LH LF
TOOLS
8° GAMP
0°
HF
45°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
WF2
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
307
EXTERNAL TURNING TOOLS
PSDN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Chamfering
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
45° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
LAMS
6° KAPR
GAMO
F
6° LH
H
LF
TOOLS
45°
H
Neutral hand tool holder only. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
Shim Shim Pin Lever Spring Clamp Lever Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
308
EXTERNAL TURNING TOOLS
PSKN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
Facing
Product Information TURNING INSERTS >> 115 CBN TURNING INSERTS >> 230
75° PCD TURNING INSERTS >> 268 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
75°
LH
LF
TOOLS
LAMS
H
GAMO 6°
6°
HF
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• When using insert with right or left hand breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
• Clamp Torque(N • m) : LLCS106=2.2, LLCS108=3.3
• : Inventory maintained in Japan.
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
309
EXTERNAL TURNING TOOLS
PTGN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
External turning
Product Information TURNING INSERTS >> 121 CBN TURNING INSERTS >> 232
91° PCD TURNING INSERTS >> 269 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH LF
TOOLS
GAMO LAMS
6° 6°
91°
HF
H
: Inventory maintained in Japan. Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
Shim Shim Pin Lever Spring Clamp Lever Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
310
EXTERNAL TURNING TOOLS
Product Information TURNING INSERTS >> 121 CBN TURNING INSERTS >> 232
91° PCD TURNING INSERTS >> 269 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH LF
GAMF GAMP
TOOLS
6° 6°
HF
91°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
LLSTN32
DTGNR1616H16 ● R TN**1604 16 16 100 25 16 20 91°
(LLSTN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSTN32
DTGNR2020K16 ● R TN**1604 20 20 125 25 20 25 91°
(LLSTN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSTN32
DTGNR2525M16 ● R TN**1604 25 25 150 25 25 32 91°
(LLSTN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSTN32
DTGNL1616H16 ● L TN**1604 16 16 100 25 16 20 91°
(LLSTN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSTN32
DTGNL2020K16 ● L TN**1604 20 20 125 25 20 25 91°
(LLSTN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSTN32
DTGNL2525M16 ● L TN**1604 25 25 150 25 25 32 91°
(LLSTN33)
LLP23 DCK2211 DCS2 DC0520T TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
311
EXTERNAL TURNING TOOLS
PTFN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
Facing
Product Information TURNING INSERTS >> 121 CBN TURNING INSERTS >> 232
91° PCD TURNING INSERTS >> 269 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
91°
WF
B
KAPR
LH LF
TOOLS
LAMS
6°
HF
H
GAMO
6°
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
LLSTN32 LLP13
PTFNR1616H16 ● R TN**1604 16 16 100 22 16 20 91°
(LLSTN33) (LLP23)
LLCL13 LLCS106 HKY25R
LLSTN32 LLP13
PTFNR2020K16 ● R TN**1604 20 20 125 22 20 25 91°
(LLSTN33) (LLP23)
LLCL13 LLCS106 HKY25R
LLSTN32 LLP13
PTFNR2525M16 ● R TN**1604 25 25 150 22 25 32 91°
(LLSTN33) (LLP23)
LLCL13 LLCS206 HKY25R
• When using insert with right or left hand breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
• Clamp Torque(N • m) : LLCS106=2.2, LLCS206=2.2, LLCS108=3.3
• Please use shim no. LLSTN33 with 3.18 mm thick inserts. When using 3.18 mm thick inserts, shim should be ordered separately.
• : Inventory maintained in Japan.
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
312
EXTERNAL TURNING TOOLS
MTJN WP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 121 CBN TURNING INSERTS >> 232
93° PCD TURNING INSERTS >> 269 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH LF
TOOLS
GAMF GAMP
93° 6° 6°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
Insert
L/R
WF
LH
HF
LF
Order Number
H
Number
Shim Shim Pin Clamp Bridge Side Lock Plate Spring Clamp Screw Wrench
HKY25R
MTJNR2020K16N ● R TN**1604 20 20 125 31 20 25 93° WPSTN33 CCP33 CCK13 CPT13 MES2 SLCS105
HKY40R
HKY25R
MTJNR2525M16N ● R TN**1604 25 25 150 31 25 32 93° WPSTN33 CCP33 CCK13 CPT13 MES2 SLCS105
HKY40R
HKY30R
MTJNR2525M22N ● R TN**2204 25 25 150 38 25 32 93° WPSTN43 CCP34 CCK14 CPT14 MES3 SLCS106
HKY40R
HKY25R
MTJNL2020K16N ● L TN**1604 20 20 125 31 20 25 93° WPSTN33 CCP33 CCK13 CPT13 MES2 SLCS105
HKY40R
HKY25R
MTJNL2525M16N ● L TN**1604 25 25 150 31 25 32 93° WPSTN33 CCP33 CCK13 CPT13 MES2 SLCS105
HKY40R
HKY30R
MTJNL2525M22N ● L TN**2204 25 25 150 38 25 32 93° WPSTN43 CCP34 CCK14 CPT14 MES3 SLCS106
HKY40R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
313
EXTERNAL TURNING TOOLS
PVJN MP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 128 CBN TURNING INSERTS >> 235
93° PCD TURNING INSERTS >> 270 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
ALF
6° KAPR
LH LF
GAMF 6°
GAMP 13°
TOOLS
93°
HF
H
ALP
13°
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
PV322
PVJNR2020K16 ● R VN**1604 20 20 125 32 20 25 93° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVJNR2525M16 ● R VN**1604 25 25 150 38 25 32 93° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVJNL2020K16 ● L VN**1604 20 20 125 32 20 25 93° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVJNL2525M16 ● L VN**1604 25 25 150 38 25 32 93° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
314
EXTERNAL TURNING TOOLS
EXTERNAL TURNING
WF
B
KAPR
GAMF LH
6° LF
TOOLS
GAMP
93° 13°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
DVJNR2020K16 ● R VN**1604 20 20 125 41 20 25 93° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVJNR2525M16 ● R VN**1604 25 25 150 41 25 32 93° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVJNL2020K16 ● L VN**1604 20 20 125 41 20 25 93° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVJNL2525M16 ● L VN**1604 25 25 150 41 25 32 93° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
315
EXTERNAL TURNING TOOLS
WF
EXTERNAL TURNING
B
KAPR
LH
LF
TOOLS
72.5° GAMP
16°
HF
H
Neutral hand tool holder only. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
DVVNN2020K16 ● N VN**1604 20 20 125 44 20 10 72.5° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVVNN2525M16 ● N VN**1604 25 25 150 44 25 12.5 72.5° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
316
EXTERNAL TURNING TOOLS
PVVN MP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 128 CBN TURNING INSERTS >> 235
72° PCD TURNING INSERTS >> 270 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF
EXTERNAL TURNING
B
KAPR
LH LF
GAMP
16°
TOOLS
72.5°
HF
H
ALP
16°
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
PV322
PVVNN2020K16 ● N VN**1604 20 20 125 38 20 10 72.5° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVVNN2525M16 ● N VN**1604 25 25 150 38 25 12.5 72.5° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
317
EXTERNAL TURNING TOOLS
Product Information TURNING INSERTS >> 128 CBN TURNING INSERTS >> 235
117° PCD TURNING INSERTS >> 270 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH
GAMF
TOOLS
LF
117.5° 7°
GAMP
13°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
DVPNR2020K16 ● R VN**1604 20 20 125 32 20 25 117.5° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVPNR2525M16 ● R VN**1604 25 25 150 32 25 32 117.5° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVPNL2020K16 ● L VN**1604 20 20 125 32 20 25 117.5° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
DVPNL2525M16 ● L VN**1604 25 25 150 32 25 32 117.5° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
318
EXTERNAL TURNING TOOLS
PVPN MP HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
Facing, Copying
Product Information TURNING INSERTS >> 128 CBN TURNING INSERTS >> 235
117° PCD TURNING INSERTS >> 270 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH LF
GAMP
TOOLS
117.5° GAMF 13°
10°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
PV322
PVPNR2020K16 ● R VN**1604 20 20 125 32 20 25 117.5° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVPNR2525M16 ● R VN**1604 25 25 150 32 25 32 117.5° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVPNL2020K16 ● L VN**1604 20 20 125 32 20 25 117.5° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
PV322
PVPNL2525M16 ● L VN**1604 25 25 150 32 25 32 117.5° (PV321) P11S HSP05008C E03 HKY25R
(PV323)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
319
EXTERNAL TURNING TOOLS
PWLN LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 130 CBN TURNING INSERTS >> 237
95° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
GAMO LH LF
LAMS
TOOLS
6° 6°
HF
H
95°
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
LLSWN3T3
PWLNR1616H06 ● R WN**06T3 16 16 100 22 16 20 95°
(LLSWN32)
LLP13 LLCL13 LLCS106 HKY25R
LLSWN3T3
PWLNR2020K06 ● R WN**06T3 20 20 125 22 20 25 95°
(LLSWN32)
LLP13 LLCL13 LLCS106 HKY25R
LLSWN3T3
PWLNR2525M06 ● R WN**06T3 25 25 150 25 25 32 95°
(LLSWN32)
LLP13 LLCL13 LLCS106 HKY25R
LLSWN3T3
PWLNL1616H06 ● L WN**06T3 16 16 100 22 16 20 95°
(LLSWN32)
LLP13 LLCL13 LLCS106 HKY25R
LLSWN3T3
PWLNL2020K06 ● L WN**06T3 20 20 125 22 20 25 95°
(LLSWN32)
LLP13 LLCL13 LLCS106 HKY25R
LLSWN3T3
PWLNL2525M06 ● L WN**06T3 25 25 150 25 25 32 95°
(LLSWN32)
LLP13 LLCL13 LLCS106 HKY25R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
320
EXTERNAL TURNING TOOLS
EXTERNAL TURNING
WF
B
KAPR
LH LF
GAMF GAMP
TOOLS
6° 6°
95°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
Order Number Insert Number LF
H
LLSWN3T3
DWLNR1616H06 ● R WN**06T3 16 16 100 25 16 20 95°
(LLSWN32)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSWN3T3
DWLNR2020K06 ● R WN**06T3 20 20 125 25 20 25 95°
(LLSWN32)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DWLNR2020K08 ● R WN**0804 20 20 125 31 20 25 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
LLSWN3T3
DWLNR2525M06 ● R WN**06T3 25 25 150 25 25 32 95°
(LLSWN32)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DWLNR2525M08 ● R WN**0804 25 25 150 31 25 32 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
DWLNR3225P08 ● R WN**0804 32 25 170 31 32 32 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
LLSWN3T3
DWLNL1616H06 ● L WN**06T3 16 16 100 25 16 20 95°
(LLSWN32)
LLP23 DCK2211 DCS2 DC0520T TKY15F
LLSWN3T3
DWLNL2020K06 ● L WN**06T3 20 20 125 25 20 25 95°
(LLSWN32)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DWLNL2020K08 ● L WN**0804 20 20 125 31 20 25 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
LLSWN3T3
DWLNL2525M06 ● L WN**06T3 25 25 150 25 25 32 95°
(LLSWN32)
LLP23 DCK2211 DCS2 DC0520T TKY15F
DWLNL2525M08 ● L WN**0804 25 25 150 31 25 32 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
DWLNL3225P08 ● L WN**0804 32 25 170 31 32 32 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
321
EXTERNAL TURNING TOOLS
SCLC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 138 CBN TURNING INSERTS >> 244
95° PCD TURNING INSERTS >> 272 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH
TOOLS
LF
95°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
322
EXTERNAL TURNING TOOLS
SDJC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 145 CBN TURNING INSERTS >> 249
93° PCD TURNING INSERTS >> 274 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH
TOOLS
LF
93°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
323
EXTERNAL TURNING TOOLS
SDNC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 145 CBN TURNING INSERTS >> 249
62° PCD TURNING INSERTS >> 274 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF
EXTERNAL TURNING
B
KAPR
LF
TOOLS
62.5°
HF
H
Neutral hand tool holder only. Unit: mm
KAPR
Stock
L/R
WF
HF
LF
Order Number Insert Number
H
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
324
EXTERNAL TURNING TOOLS
PRGC LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing, Coping
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 151 SPARE PARTS >> 1927
TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
B
WF
LH
TOOLS
LF
HF
H
Right hand tool holder shown. Unit: mm
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
(10,12,16,
20)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
325
EXTERNAL TURNING TOOLS
PRDC LL HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 151 SPARE PARTS >> 1927
TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF
EXTERNAL TURNING
B
LH
LF
TOOLS
HF
H
Neutral hand tool holder only. Unit: mm
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
(10,12,16,
20)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
326
EXTERNAL TURNING TOOLS
SRGC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing, Coping
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 151 SPARE PARTS >> 1927
TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
45°
LH
LF
TOOLS
HF
H
Right hand tool holder shown. Unit: mm
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
Standard
(06,08)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
327
EXTERNAL TURNING TOOLS
SRDC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 151 SPARE PARTS >> 1927
TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF
EXTERNAL TURNING
B
LH
LF
TOOLS
HF
H
Neutral hand tool holder only. Unit: mm
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
Standard
(06,08)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
328
EXTERNAL TURNING TOOLS
SSSC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Facing,
Product Information TURNING INSERTS >> 152 SPARE PARTS >> 1927
45° TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
EXTERNAL TURNING
WF
B
KAPR
LH
TOOLS
LF
45°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
329
EXTERNAL TURNING TOOLS
STGC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
External turning
Product Information TURNING INSERTS >> 155 CBN TURNING INSERTS >> 252
91° PCD TURNING INSERTS >> 276 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH
TOOLS
LF
HF
91°
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
330
EXTERNAL TURNING TOOLS
SVJC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 162 CBN TURNING INSERTS >> 259
93° PCD TURNING INSERTS >> 280 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
LH
TOOLS
LF
93°
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
331
EXTERNAL TURNING TOOLS
SVVC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175
External turning, Copying
GRADES AND CHIP BREAKERS >> 38
Product Information TURNING INSERTS >> 162 CBN TURNING INSERTS >> 259
72° PCD TURNING INSERTS >> 280 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
WF
EXTERNAL TURNING
B
KAPR
LF
TOOLS
72.5°
HF
H
Neutral hand tool holder only. Unit: mm
KAPR
Stock
L/R
WF
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
332
EXTERNAL TURNING TOOLS
SVPC SP HOLDER
RECOMMENDED CUTTING CONDITION >> 175 GRADES AND CHIP BREAKERS >> 38
Facing, Copying
Product Information TURNING INSERTS >> 162 CBN TURNING INSERTS >> 259
117° PCD TURNING INSERTS >> 280 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
EXTERNAL TURNING
WF
B
KAPR
TOOLS
LH
117.5° LF
HF
H
Right hand tool holder shown. Unit: mm
KAPR
Stock
L/R
WF
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
333
EXTERNAL TURNING TOOLS
< 300°
EXTERNAL TURNING
B
WF
92°30´
2° LH
LF
92°
TOOLS
30´
HF
H
Right hand tool holder shown.
SVX
(15)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
334
EXTERNAL TURNING TOOLS
y Applicable range
Depth of Cut (mm)
Corner R0.8
Corner R0.4
EXTERNAL TURNING
TOOLS
Feed (mm/rev)
NOTE
335
EXTERNAL TURNING TOOLS
SDJE AL Holder
SPARE PARTS >> 1927
External turning, Copying
TECHNICAL INFO >> 1971
Product Information TURNING INSERTS >> 150 PCD TURNING INSERTS >> 283
93°
KAPR
・Holder
EXTERNAL TURNING
B
WF
TOOLS
93°
LH
93° 7° LF
7°
H
Right hand tool
HF
holder shown.
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
336
EXTERNAL TURNING TOOLS
SDNE AL Holder
SPARE PARTS >> 1927
External turning, Copying
TECHNICAL INFO >> 1971
Product Information TURNING INSERTS >> 150 PCD TURNING INSERTS >> 283
62°
30´
KAPR
·Holder
EXTERNAL TURNING
WF
TOOLS
62°30´
62° LF
30´ 10°
HF
H
Dimensions (mm)
*
Order Number Stock Insert Number
H B LF HF WF Clamp Screw Wrench
SDNEN1616H15 a 1504pp 16 16 100 16 8 CS451190T TKY20F
SDNEN2020K15 a DEGX 1504pp 20 20 125 20 10 CS451190T TKY20F
SDNEN2525M15 a 1504pp 25 25 150 25 12.5 CS451190T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
337
EXTERNAL TURNING TOOLS
STGE AL Holder
SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
External turning
Product Information TURNING INSERTS >> 157 PCD TURNING INSERTS >> 284
91°
KAPR
・Holder
EXTERNAL TURNING
B
WF
TOOLS
91°
LH
7° LF
91°
7°
Right hand tool
HF
H
holder shown.
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
338
EXTERNAL TURNING TOOLS
STFE AL Holder
SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
Facing
Product Information TURNING INSERTS >> 157 PCD TURNING INSERTS >> 284
91°
KAPR
・Holder
EXTERNAL TURNING
WF
B
91°
91°
TOOLS
LH
LF
7°
7°
Right hand tool
HF
H
holder shown.
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
339
EXTERNAL TURNING TOOLS
SVJD AL Holder
SPARE PARTS >> 1927
External turning, Copying
TECHNICAL INFO >> 1971
Product Information TURNING INSERTS >> 164 PCD TURNING INSERTS >> 285
93°
KAPR
・Holder
EXTERNAL TURNING
LF
TOOLS
B
WF
93°
93° LH
7°
HF
H
Right hand tool holder shown.
R/L R/L-F
(16) (16)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
340
EXTERNAL TURNING TOOLS
TLHR TL HOLDER
TECHNICAL INFO >> 1971
External turning, Copying
Product Information
HOLDER
EXTERNAL TURNING
Revised Conventional Insert Dimensions (mm)
Geometry Stock
order number order number Number IC H B HF LF LH
TOOLS
TLHRLH (External turning, Copying) TLHR2020K5 TLHR2020K5 a RTG05A 5 20 20 20 125 16
TLHR2020K6 TLHR2020K6 a RTG06A 6 20 20 20 125 16
B
LF
TLHR3225P10 TLHR54P10 a RTG10A 10 32 25 32 170 25
HF
6° 6°
15°
L17
L17
S
S
D4 D4
12° 12°
Stock Stock
Dimensions (mm) Dimensions (mm)
Order Number Carbide Order Number CBN
UTi20T HTi10 IC S D4 L17 MB825 IC S D4 L17
RTG05A a a 5 7.5 2.5 3.5 RTG05A a 5 7.5 2.5 3.5
RTG06A a a 6 7.5 3.5 3.5 RTG06A a 6 7.5 3.5 3.5
RTG07A a 7 11 3.5 5 RTG07A a 7 11 3.5 5
RTG08A a a 8 11 4.5 5 RTG08A a 8 11 4.5 5
RTG10A a a 10 14 5.5 6.5 RTG10A a 10 14 5.5 6.5
Dimensions (mm)
Insert Seat Dimensions Insert Diameter IC Taper Diameter
h d1 d2 l1 l2
0
12° -10' 5 4 2.5 1.9 1.85 3.2 1.5
-0.3
ød1
0.3
341
342
TURNING TOOLS
SMALL TOOLS
OUTLINE OF SMALL TOOLS ............... 344 EXTERNAL THREADING ................. 370
STANDARD FOR SMALL TOOLS ......... 346 EXTERNAL FRONT TURNING,
EXTERNAL FRONT TURNING ......... 350 COPYING, FACING ................... 373
EXTERNAL BACK TURNING............ 358 CAM TYPE TOOL POSTS ................ 374
EXTERNAL GROOVING .................. 361 BORING .......................................... 378
EXTERNAL CUTTING OFF .............. 364
343
SMALL TOOLS
3.5mm
Step Difference 6.5mm
0 ─ 20°
Cut Off
Diameter
< & 35
20°
344
SMALL TOOLS
SMALL TOOLS
End Milling End Mills
Round Shank
345
SMALL TOOLS
SCLC-SM 8 x 8 x 125
SMALL TOOLS
10 x 10 x 125
12 x 12 x 150 a GROOVING
16 x 16 x 150
95° Name of Shank Size (mm) Geometry
^ 351 Tool Holder (H x W x L)
8 x 8 x 80
SDJC-SM 8 x 8 x 125 GTAH 8 x 8 x 120
10 x 10 x 125 (Groove Width 10 x 10 x 80
12 x 12 x 150 0.3 ─ 3.0mm) 10 x 10 x 120
16 x 16 x 150 12 x 12 x 80
93° 12 x 12 x 120 U Type
^ 352 ^ 361 16 x 16 x 120 E Type VT Type
SVJB-SM 10 x 10 x 125
a CUTTING OFF
12 x 12 x 150
16 x 16 x 150
Name of Shank Size (mm)
93° Tool Holder (H x W x L) Geometry
^ 355
CTAH 8
10
x
x
10
10
x
x
120
120
SVPP-SM 10 x 10 x 125 (Max. Cut Off 12 x 12 x 120
12 x 12 x 150 Diameter 16 x 16 x 120
16 x 16 x 150 12mm)
117.5° ^ 364
^ 357
CTAH-S 10 x 10 x 80
SVVB-SM 10 x 10 x 125 (Max. Cut Off
12 x 12 x 150 Diameter
16 x 16 x 150 12mm)
72.5° ^ 364
^ 356
CTBH 10 x 10 x 120
12 x 12 x 120
(Max. Cut Off
a BACK TURNING Diameter 16 x 16 x 120
16mm)
Name of Shank Size (mm)
(H x W x L) Geometry ^ 366
Tool Holder
BTAH 8 x 10 x 120 CTCH 10 x 10 x 120
12 x 12 x 120
10 x 10 x 120 (Max. Cut Off
(Insert Size 12 x 12 x 120 Diameter
2.8, 3.5, 5.0mm) 16 x 16 x 120 20mm)
^ 358 ^ 367
346
SMALL TOOLS
SMALL TOOLS
16 x 16 x 100
^ 611
347
SMALL TOOLS
SBAH FSDUC
For Gang Type DIMPLE BAR FSDUC-E
Tool Posts Steel Shank
Carbide Shank
^ 378 Min. Cutting Diameter : 3mm ^ 390 Min. Cutting Diameter : 14mm
MICRO-MINI CB FSDQC
CR DIMPLE BAR FSDQC-E
SMALL TOOLS
TWIN
Boring Bars Steel Shank
Carbide Shank
(Solid Carbide)
^ 410 Min. Cutting Diameter : 2.2mm ^ 392 Min. Cutting Diameter : 13mm
CooFR-BLS FSTUP
MICRO-MINI DIMPLE BAR FSTUP-E
Boring Bars Steel Shank
(Solid Carbide) Carbide Shank
^ 417 Min. Cutting Diameter : 3.2mm ^ 388 Min. Cutting Diameter : 10mm
SCLC FSVUB/C
MICRO-DEX
Boring Bars DIMPLE BAR
(Steel Shank)
(Carbide Shank)
^ 429 Min. Cutting Diameter : 5mm ^ 396 Min. Cutting Diameter : 16mm
STUC FSVPB/C
MICRO-DEX
Boring Bars DIMPLE BAR
(Steel Shank)
(Carbide Shank)
^ 408 Min. Cutting Diameter : 8mm ^ 397 Min. Cutting Diameter : 16mm
SWUB FSVJB/C
MICRO-DEX
Boring Bars DIMPLE BAR
(Steel Shank)
(Carbide Shank)
^ 407 Min. Cutting Diameter : 6mm ^ 398 Min. Cutting Diameter : 16mm
FSWL1 FSWUB/P
DIMPLE BAR FSWUB/P-E
F type Bars
Steel Shank
(Steel Shank) Carbide Shank
^ 422 Min. Cutting Diameter : 5.8mm ^ 394 Min. Cutting Diameter : 10mm
FSWL2
F type Bars
(Carbide Shank)
FSCLC/P
DIMPLE BAR FSCLC/P-E
Steel Shank
Carbide Shank
^ 386 Min. Cutting Diameter : 10mm
348
SMALL TOOLS
MICRO-MINI CG TYPE(Grooving)
TWIN
Boring Bars
(Solid Type)
^ 580 Min. Cutting Diameter : 3mm
MICRO-MINI CT TYPE(Threading)
SMALL TOOLS
TWIN
Boring Bars
(Solid Type)
^ 619 Min. Cutting Diameter : 3mm
FSL51
F type Bars FSL52
Steel Shank
Carbide Shank
(Grooving)
(Threading) ^ 584 Min. Cutting Diameter : 10mm
349
SMALL TOOLS
HBKW
LH
WF2
B
KAPR LF
90°
SMALL TOOLS
HF
H
Right hand tool holder shown. Unit: mm
HBKW
KAPR
Stock
WF2
L/R
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
350
SMALL TOOLS
HBKW
LH
WF2
B
KAPR LF
95°
HF
SMALL TOOLS
H
Right hand tool holder shown. Unit: mm
HBKW
KAPR
Stock
WF2
L/R
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
351
SMALL TOOLS
HBKW
LH
WF2
B
KAPR LF
93°
HF
SMALL TOOLS
H
Right hand tool holder shown. Unit: mm
HBKW
KAPR
Stock
WF2
L/R
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
352
SMALL TOOLS
HBKW
LH
WF2
B
62.5° KAPR LF
HF
SMALL TOOLS
H
Right hand tool holder shown. Unit: mm
HBKW
KAPR
Stock
WF2
L/R
LH
HF
LF
Order Number Insert Number
H
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
353
SMALL TOOLS
WF2
B
KAPR LF
95°
HF
H
SMALL TOOLS
KAPR
Stock
WF2
L/R
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
R/L-SRF SMG
(08,11) (08,11)
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (70─120) 0.06 (0.02─0.1)
(Note) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle.
354
SMALL TOOLS
WF2
B
KAPR LF
93°
HF
SMALL TOOLS
Right hand tool holder shown. Unit: mm
KAPR
Stock
WF2
L/R
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (70─120) 0.06 (0.02─0.1)
(Note) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle.
355
SMALL TOOLS
WF2
B
KAPR LF
72.5°
HF
H
SMALL TOOLS
KAPR
Stock
WF2
L/R
HF
LF
Order Number Insert Number
H
B
Clamp Screw Wrench
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (70─120) 0.06 (0.02─0.1)
(Note) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle.
356
SMALL TOOLS
HBKW
LH
WF2
B
KAPR
117.5° LF
HF
SMALL TOOLS
H
Right hand tool holder shown. Unit: mm
HBKW
KAPR
Stock
WF2
L/R
LH
HF
LF
Order Number Insert Number
H
R/L-SRF SMG
(11) (11)
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (70─120) 0.06 (0.02─0.1)
(Note) The insert photos are only examples. The letters refer to the chip breaker and the dimension refers to the inscribed circle.
357
SMALL TOOLS
LF
5.5
3°
B
WF2
KAPR
55° LE
60°
SMALL TOOLS
HF
H
HBH
15 Right hand tool holder shown.
INSERTS
Coated Dimensions (mm)
Order Number Hand Geometry
VP15TF KAPR * REL LE *
BTAT552800R-B R a 55° 0 2.8 With Breaker 2.5
20
BTAT552801L-B L 55° 0.1 2.8
*12°
a
a
REL
1.25
20
*12°
8
50°
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
358
SMALL TOOLS
LF
7.5
B
WF2
KAPR 60° 1°
60° LE
SMALL TOOLS
HBH HF
H
19.5 Right hand tool holder shown.
INSERTS
Coated Dimensions (mm) LE
Order Number Hand
VP15TF REL CF (mm) * Geometry
CF
REL 5.5
BTBT604500L-B L a 0 0.2 4.5
0.7
25
BTBT604501R-B R a 0.1 0.3 4.5
BTBT604501L-B L 0.1 0.3 4.5 *15°
9.4
a
REL 7
BTBT606000L L a 0 0.2 6.0
0.7
25
*15°
9.4
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
359
SMALL TOOLS
2°
B=16
B=12
B=10
WF2
B
LE
8.5
BTVHRpppp-75F
KAPR 53°
LF
53°
SMALL TOOLS
H
holder only.
INSERTS
Coated Dimensions (mm) LE
Order Number Hand
VP15TF IC S REL (mm) * Geometry
7°
IC S LE
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
360
SMALL TOOLS
LF
CDX
B
2°
0
U Type VT Type
E Type
HF
SMALL TOOLS
HBH
6°
15 Right hand tool holder shown.
*
1 0.3─
GTAHR/L1212-20 a a GTCT pppp 12 12 12 120 2 1 3.0
NS404W NKY15S
Long Shank
0.3─
GTAHR/L1616-20 a a pppp 16 16 16 120 2 ─ 3.0
NS404W NKY15S
1.45─
GTBHR/L1010-30 a a pppp 10 10 10 120 3 3 3.0
NS404W NKY15S
1.45─
GTBHR/L1212-30 a a GTBT. GTCT pppp 12 12 12 120 3 1 3.0
NS404W NKY15S
1.45─
GTBHR/L1616-30 a a pppp 16 16 16 120 3 ─ 3.0
NS404W NKY15S
2.5─
GTCHR/L1010-30 a a GTCT pppp 10 10 10 120 3 3 3.0
NS404W NKY15S
(Note) Please use right hand insert for right hand holder and left hand insert for left hand holder.
* 1 Even if the insert dimension CDX exceeds the holder dimension CDX, it is not possible to machine depths over CDX.
* 2 Clamp Torque (N • m) : NS404W=1.0
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.05 (0.02─0.09)
361
SMALL TOOLS
INSERTS
Coated Dimensions (mm)
Order Number Hand Geometry
VP15TF CW CDX *1 RER/L IC S
GTAT 03006V3R-U R a 0.3 0.6 0.03 9.525 3.18 U Type Breaker (General purpose Grooving)
GTAT 03006V3L-U L a 0.3 0.6 0.03 9.525 3.18
GTAT 05012V5R-U R a 0.5 1.2 0.05 9.525 3.18
GTAT 05012V5L-U L a 0.5 1.2 0.05 9.525 3.18
GTAT 07520V5R-U R a 0.75 2.0 0.05 9.525 3.18
GTAT 07520V5L-U L a 0.75 2.0 0.05 9.525 3.18
GTAT 09520V5R-U R a 0.95 2.0 0.05 9.525 3.18
GTAT 09520V5L-U L a 0.95 2.0 0.05 9.525 3.18 20° +0.05
CW 0
SMALL TOOLS
CDX
a
RER REL
GTAT 10020V5L-U L a 1.0 2.0 0.05 9.525 3.18
GTAT 10320V5R-U R a 1.03 2.0 0.05 9.525 3.18
GTAT 12520V5R-U R a 1.25 2.0 0.05 9.525 3.18
GTAT 12520V5L-U L a 1.25 2.0 0.05 9.525 3.18
GTBT 14530V5R-U R a 1.45 3.0 0.05 9.525 3.18
GTBT 14530V5L-U L a 1.45 3.0 0.05 9.525 3.18
IC S
GTBT 15030V5R-U R a 1.5 3.0 0.05 9.525 3.18
GTBT 15030V5L-U L a 1.5 3.0 0.05 9.525 3.18
GTBT 17530V5R-U R a 1.75 3.0 0.05 9.525 3.18
GTBT 17530V5L-U L a 1.75 3.0 0.05 9.525 3.18
GTBT 20030V5R-U R a 2.0 3.0 0.05 9.525 3.18
GTBT 20030V5L-U L a 2.0 3.0 0.05 9.525 3.18
GTCT 25030V5R-U R a 2.5 3.0 0.05 9.525 3.18
GTCT 25030V5L-U L a 2.5 3.0 0.05 9.525 3.18 Right hand insert shown.
362
SMALL TOOLS
INSERTS
Coated Carbide Dimensions (mm)
Order Number Hand Geometry
VP15TF VP15KZ TF15 CW CDX RER/L IC S
GTAT 03306V3R-E R a 0.33 0.6 0.03 9.525 3.18 E Type Breaker (Ring processing Grooving)
GTAT 03306V3L-E L a 0.33 0.6 0.03 9.525 3.18
GTAT 04312V3R-E R a 0.43 1.2 0.03 9.525 3.18
GTAT 04312V3L-E L a 0.43 1.2 0.03 9.525 3.18
GTAT 05312V5R-E R a 0.53 1.2 0.05 9.525 3.18
GTAT 05312V5L-E L a 0.53 1.2 0.05 9.525 3.18
GTAT 07520V5R-E R a 0.75 2.0 0.05 9.525 3.18
GTAT 07520V5L-E L a 0.75 2.0 0.05 9.525 3.18
SMALL TOOLS
GTAT 09520V5R-E R a 0.95 2.0 0.05 9.525 3.18
GTAT 09520V5L-E L a 0.95 2.0 0.05 9.525 3.18
GTAT 10020V5R-E R a 1.0 2.0 0.05 9.525 3.18
GTAT 10020V5L-E L a 1.0 2.0 0.05 9.525 3.18
GTAT 1002001R-E R a 1.0 2.0 0.1 9.525 3.18
GTAT 1002001L-E L a 1.0 2.0 0.1 9.525 3.18 20° CW ±0.025
CDX
GTAT 12020V5R-E R a 1.2 2.0 0.05 9.525 3.18
RER REL
GTAT 12020V5L-E L a 1.2 2.0 0.05 9.525 3.18
GTAT 1202001R-E R a 1.2 2.0 0.1 9.525 3.18
GTAT 1202001L-E L a 1.2 2.0 0.1 9.525 3.18
GTAT 14020V5R-E R a 1.4 2.0 0.05 9.525 3.18
GTAT 14020V5L-E L a 1.4 2.0 0.05 9.525 3.18
IC S
GTBT 15030V5R-E R a 1.5 3.0 0.05 9.525 3.18
GTBT 15030V5L-E L a 1.5 3.0 0.05 9.525 3.18
GTBT 1503001R-E R a 1.5 3.0 0.1 9.525 3.18
GTBT 1503001L-E L a 1.5 3.0 0.1 9.525 3.18
GTBT 18030V5R-E R a 1.8 3.0 0.05 9.525 3.18
GTBT 18030V5L-E L a 1.8 3.0 0.05 9.525 3.18
GTBT 20030V5R-E R a 2.0 3.0 0.05 9.525 3.18
GTBT 20030V5L-E L a 2.0 3.0 0.05 9.525 3.18
GTBT 2003001R-E R a 2.0 3.0 0.1 9.525 3.18
GTBT 2003001L-E L a 2.0 3.0 0.1 9.525 3.18
GTBT 22530V5R-E R a 2.25 3.0 0.05 9.525 3.18
GTBT 22530V5L-E L a 2.25 3.0 0.05 9.525 3.18
GTCT 25030V5R-E R a 2.5 3.0 0.05 9.525 3.18
GTCT 25030V5L-E L a 2.5 3.0 0.05 9.525 3.18
GTCT 27530V5R-E R a 2.75 3.0 0.05 9.525 3.18
GTCT 27530V5L-E L a 2.75 3.0 0.05 9.525 3.18
GTCT 30030V5R-E R a 3.0 3.0 0.05 9.525 3.18
GTCT 30030V5L-E L a 3.0 3.0 0.05 9.525 3.18 Right hand insert shown.
GTAT 0330600R-VT R a 0.33 0.6 0 9.525 3.18 0.25 VT Type Breaker
GTAT 0431200R-VT R a 0.43 1.2 0 9.525 3.18 0.9 (Grooving, Side Turning)
GTAT 0532000R-VT R a 0.53 2.0 0 9.525 3.18 1.6
GTAT 0652000R-VT R 0.65 2.0 0 9.525 3.18 1.6
Max. Cutting Depth (mm)
a
GTAT 0752000R-VT R a 0.75 2.0 0 9.525 3.18 1.6 14° CW ±0.025
CDX
IC S IC S
GTATR GTBTR
363
SMALL TOOLS
·CTAH
LF
5.5
B
0
CUTDIA 22
SMALL TOOLS
1°
HBH HF
H
15 Right hand tool holder shown.
·CTAH-S
LF
16 45°
5.5
B
5.5
CUTDIA
1°
HBH HF
12
CTAHR1010-120S CTAT pppp 10 10 10 80 2 NS401 NKY15S
*
a
(8) 1
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.05 (0.02─0.09)
364
SMALL TOOLS
INSERTS
Coated Dimensions (mm) CUTDIA1 *
Breaker
Holder
CW ±0.05
R a 1.0 6.7 0.05 12
CTAT 15120V5RR-B R a 1.5 6.7 0.05 12
RER
16° CTAT 20120V5RR-B R a 2.0 6.7 0.05 12
REL CDX CTAT 15120V5RR-BX R a 1.5 6.7 0.05 12
CTAT 20120V5RR-BX R 2.0 6.7 0.05 12
CW ±0.05
a
SMALL TOOLS
RER
16° Strong Edge Type
CTAT 10120V5RN-B N 1.0 6.7 0.05 12
With Breaker
0° REL CDX a
CW ±0.05
CTAT 15120V5RN-B N a 1.5 6.7 0.05 12
Right Hand (R)
RER
0° Strong Edge Type
REL CDX CTAT 10110V5RL-B L a 1.0 6.7 0.05 11
16°
CW ±0.05
RER
50°
CDX CTAT 1012000RR R 1.0 6.7 0 12
Without Breaker
REL a
CW ±0.05
3.5
CTAT 2012000RR R a 2.0 6.7 0 12
RER
20°
16° REL CTAT 07080V5LL-B L a 0.7 4.5 0.05 8
CW ±0.05
a
CW ±0.05
a
RER CDX
0°
REL CTAT 10110V5LR-B R a 1.0 6.7 0.05 11
CW ±0.05
a
CW ±0.05
365
SMALL TOOLS
LF
7.5
B
0
25
1°
CUTDIA
HBH HF
H
SMALL TOOLS
INSERTS
Coated Dimensions (mm) CUTDIA
Breaker
Holder
REL 9.2
CTBT15160V5RR-B R a 1.5 0.05 16
CTBT20160V5RR-B R a 2.0 0.05 16
CW ±0.05
Right Hand (R)
RER
16°
REL 9.2
CTBT20160V5RN-B N a 2.0 0.05 16
0°
CW ±0.05
RER
16° 25
REL
CTBT20160V5LL-B L a 2.0 0.05 16
With Breaker
CW ±0.05
9.4
45°
RER 9.2
3.5
REL
CTBT20160V5LN-B N a 2.0 0.05 16
Left Hand (L)
CW ±0.05
0° RER 9.2
16°
Right hand RER 9.2
insert shown.
366
SMALL TOOLS
LF
CDX
CW
B
0
0.5
IA
SMALL TOOLS
HF
TD
H
U
C
Right hand tool holder shown.
INSERTS
Coated Dimensions (mm)
Breaker
CW ±0.05
90°
CTCT22200V5R-B R
*a 2.2 17° 0.05 20
With Breaker
CTCT2220001R-B R
*a 2.2 17° 0.1 20 RER
CTCT25200V5R-B R
*a 2.5 17° 0.05 20
CTCT2520001R-B R
*a 2.5 17° 0.1 20
PSIRR PSIRL
CTCT22200V5L-B L
*a 2.2 17° 0.05 20
CTCT2220001L-B L
*a 2.2 17° 0.1 20
Neutral (N) Right Hand (R) Left Hand (L)
CTCT25200V5L-B L
*a 2.5 17° 0.05 20
CTCT2520001L-B L
*a 2.5 17° 0.1 20
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
367
SMALL TOOLS
LF
LH
CDX
CW
0.5
B
0.5
6°
SMALL TOOLS
IA
HF
TD
H
Right hand tool holder shown.
U
C
Stock Dimensions (mm) CUTDIA
*
Order Number Insert Number (mm)
R L H B HF LF LH CDX Clamp Screw Wrench
CTDHR/L1616-230 a 2535pp 16 16 16 125 24 12.2 23 HBH06020 HKY40R
CTDHR/L1616-280 a CTDT 2535pp 16 16 16 120 25 15 28 NS502W HKY25R
CTDHR/L1616-350 a a 2535pp 16 16 16 125 32 18.5 35 HBH06020 HKY40R
INSERTS
Coated Dimensions (mm)
Breaker
6.39 12
CTDT2535002N-B N a 2.5 0° 0.2 23 ─35 REL
CW ±0.05
With Breaker
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
368
SMALL TOOLS
LF
LH
F2
CW
0.5
B
0.5
6°
SMALL TOOLS
IA
HF
H
TD
Right hand tool holder shown.
U
C
Stock Dimensions (mm) CUTDIA
*
Order Number Insert Number (mm)
R L H B HF LF LH F2 Clamp Screw Wrench
CTEHR/L1616-230 a 3035pp 16 16 16 125 24 12.2 23 HBH06020 HKY40R
CTEHR/L1616-280 a CTET 3035pp 16 16 16 120 25 15 28 NS502W HKY25R
CTEHR/L1616-350 a a 3035pp 16 16 16 125 32 18.5 35 HBH06020 HKY40R
INSERTS
Coated Dimensions (mm)
Breaker
CW ±0.05
With Breaker
90°
CTET30350V5R-BS R a 3 17° < 0.05 23 ─35
RER
CTET3035002N-B N a 3 0° 0.2 23 ─35 PSIRL
PSIRR
CTET3035002R-B R a 3 8° 0.2 23 ─35
CTET3035002L-B L a 3 8° 0.2 23─35 Neutral (N) Right Hand (R) Left Hand (L)
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
369
SMALL TOOLS
LF
7
B
6.5 (Maximum Step Difference)
HBH HF
SMALL TOOLS
H
15 Right hand tool holder shown.
HOLDER APPLICATION
Right Hand Holder Left Hand Holder
Right Hand Insert
Left Hand Insert
370
SMALL TOOLS
INSERTS
Coated Dimensions (mm) Pitch of Screw
Holder
Breaker
Setting Geometry Geometry Insert Geometry Order Number Hand (mm)
VP15TF PDX RE (thread/inch)
General Purpose 0.05 0.2─ 0.75
Partial Profile TTAT60075F5RR-B R a 0.4 Flat (80 ─36)
(60°)
60°
PDX
0.5 ─1.25
RE
TTAT60125V5RR-B R a 0.8 0.05
(40 ─16)
Right Hand (R)
PDX
60°
0.5 ─1.25
TTAT60125V5RL-B
SMALL TOOLS
RE L a 0.8 0.05
(40 ─16)
2.5
1.0 ─1.5
TTAT6015001RN-B N 1.25 0.1
60°
a
PDX (24 ─18)
20.0 RE
a
Flat (80 ─36)
60°
50°
PDX
With Breaker
0.5 ─1.25
RE
TTAT60125V5LR-B R a 0.8 0.05
(40 ─16)
Left Hand (L)
60°
0.5 ─1.25
RE TTAT60125V5LL-B L a 0.8 0.05
(40 ─16)
1.0 ─1.5
TTAT6015001LN-B N 1.25 0.1
60°
a
PDX
(24 ─18)
Right hand insert shown. RE
General Purpose RE
Left Hand (L) Right Hand (R)
55°
a
Partial Profile
2.5
(55°)
PDX
a
20.0 RE
RE
TTAT55158V5LR-B R 0.8 0.05 (40 ─16)
PDX
55°
a
8.0
50°
PDX
a
Right hand insert shown. RE
P Carbon Steel · Alloy Steel 180HB─280HB 100 (50─150) M Stainless Steel < 200HB 80 (50─120)
Free Cutting Steel ─ 110 (30─180) N Non-Ferrous Metal ─ 150 (70─230)
371
SMALL TOOLS
0.2
2─4
0.25
0.3
3─5
0.35
0.4
4─6
0.45
SMALL TOOLS
0.5
0.6
0.7
5─7
0.75
0.8 Threading
1
impossible
1.25
6─8
1.5
80
3─5
72
64
4─6
56
48
44
40
32 5─7
28
26
Threading
24
impossible
20
18 6─8
16
372
SMALL TOOLS
LU
WF2
0°
CDX
D
C
O
N
WF
H
93° KAPR
SMALL TOOLS
93°
LF H
*
Stock
Dimensions (mm)
Order Number Insert Number
L DCON LF LU H WF WF2 CDX Clamp Screw Wrench
SH 16H-FSDUCL07 a DCET 15.875 100 20 14 7.75 0.75 4.2 TS254 TKY08R
DCGT
SH 19K-FSDUCL07 a DCGW 19.05 125 20 17 9.25 0.75 4.2 TS254 TKY08R
DCMT
SH 20K-FSDUCL07 a
DCMW
0702pp 20 125 20 18 9.75 0.75 4.2 TS254 TKY08R
SH 22K-FSDUCL07 a NP-DCGW 22 125 20 20 10.75 0.75 4.2 TS254 TKY08R
NP-DCMT
SH 25M-FSDUCL07 a NP-DCMW 25.4 150 20 23 12.25 0.75 4.2 TS254 TKY08R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use right hand insert only.
P Carbon Steel · Alloy Steel 180HB─280HB VP15TF 100 (50─150) 0.08 (0.01─0.15)
373
SMALL TOOLS
HBKW
0.1
B
1°
20
LF
SMALL TOOLS
HF
H
Right hand tool holder shown.
Expanded
View 45°
RER
7°
0.035
IC S
REL
Left hand insert shown. 5°
374
SMALL TOOLS
·Front turning;CSVTF
CF
RER
CSVTF30AL L a 6.35 2.38 0 0.3 5° 3.0
CSVTF30BR R a 6.35 2.38 0 0.3 2° 3.0 7° PSIRL
CSVTF30CR R a 6.35 2.38 0 0.15 2° 3.0
IC S 30°
CSVTF30DR R a 6.35 2.38 0 0.15 5° 3.0 Right hand insert shown.
CSVTF30AR-B R a 6.35 2.38 0 0.3 5° 3.0 With Breaker
SMALL TOOLS
RER
CF
CSVTF30AL-B L a 6.35 2.38 0 0.3 5° 3.0
CSVTF30BR-B R a 6.35 2.38 0 0.3 2° 3.0
7°
CSVTF30CR-B R a 6.35 2.38 0 0.15 2° 3.0 PSIRL
IC S 30°
CSVTF30DR-B R a 6.35 2.38 0 0.15 5° 3.0 Right hand insert shown.
RER
80°
0.7
7°
IC S
REL
45°
375
SMALL TOOLS
·Cutting off;CSVTC
CW ±0.05
a
SMALL TOOLS
CW ±0.05
CSVTC0950R-B R a 6.35 2.38 0 2.5 0.9 2.0
7°
CSVTC1060R-B R a 6.35 2.38 0 3.0 1.0 2.5
IC S CDX REL
CSVTC1360R-B R a 6.35 2.38 0 3.0 1.3 2.5
CSVTC1560R-B R a 6.35 2.38 0 3.0 1.5 2.5 Right hand insert shown.
·Back turning;CSVTB
CW ±0.05
L a 6.35 2.38 0 2.5 1 0.3 5° 2.0 45°
PSIRR
CSVTB10BR R a 6.35 2.38 0 2.5 1 0.3 2° 2.0
CF
CSVTB10CR R a 6.35 2.38 0 2.5 1 0.15 2° 2.0
7°
CSVTB10DR R a 6.35 2.38 0 2.5 1 0.15 5° 2.0
REL
IC S
CSVTB12AR R a 6.35 2.38 0 2.5 1.2 0.3 5° 2.0 CDX
CSVTB14AR R a 6.35 2.38 0 2.5 1.4 0.3 5° 2.0 Right hand insert shown.
CSVTB10AR-B R a 6.35 2.38 0 2.5 1 0.3 5° 2.0 With Breaker
CW ±0.05
45°
CSVTB10BR-B R a 6.35 2.38 0 2.5 1 0.3 2° 2.0 PSIRR
376
SMALL TOOLS
·Grooving;CSVTG
SMALL TOOLS
CSVTG05510R R a 6.35 2.38 0 1.0 0.55 0.45
CSVTG06010R R a 6.35 2.38 0 1.0 0.6 0.45
CSVTG06510R R a 6.35 2.38 0 1.0 0.65 0.45
CSVTG07010R R a 6.35 2.38 0 1.0 0.7 0.45
+0.03
CSVTG07520R R a 6.35 2.38 0 2.0 0.75 1.4
CW +0
CSVTG07520L L a 6.35 2.38 0 2.0 0.75 1.4 RER
CSVTG08020R R a 6.35 2.38 0 2.0 0.8 1.4
7°
CSVTG08520R R a 6.35 2.38 0 2.0 0.85 1.4 REL
IC S CDX
CSVTG09020R R a 6.35 2.38 0 2.0 0.9 1.4
CSVTG09520R R a 6.35 2.38 0 2.0 0.95 1.4
CSVTG09520L L a 6.35 2.38 0 2.0 0.95 1.4
CSVTG10020R R a 6.35 2.38 0 2.0 1.0 1.4
CSVTG11030R R a 6.35 2.38 0 3.0 1.1 2.6
CSVTG12030R R a 6.35 2.38 0 3.0 1.2 2.6
CSVTG12030L L a 6.35 2.38 0 3.0 1.2 2.6
CSVTG13030R R a 6.35 2.38 0 3.0 1.3 2.6
CSVTG14030R R a 6.35 2.38 0 3.0 1.4 2.6
CSVTG15030R R a 6.35 2.38 0 3.0 1.5 2.6 Right hand insert shown.
·Threading;CSVTT
7°
IC S
RR RL
0.35 ±0.05
0.35 ±0.05
1.0
1.0
60°
60°
3.0 RE 3.0 RE
377
SMALL TOOLS
95° 15
CDX
B
17.5
SMALL TOOLS
0
HF
H
Right hand tool holder only.
B
WF2
CDX
HF
378
SMALL TOOLS
·INSERTS
18.5
SBAT308000L a 95° 0 8.0 3
PSIRL
12.0
RER
SBAT3080V5L a 95° 0.05 8.0 3
9.0
SMALL TOOLS
CDX
With Breaker
2.50
1.25
SBAT3080V5L-B a 95° 0.05 8.0 3
379
380
TURNING TOOLS
BORING BARS
IDENTIFICATION ........................................... 382
FEATURES OF DIMPLE BAR.......................... 383
STANDARD BORING BARS............................ 384
DIMPLE BAR .............................................. 386
DOUBLE CLAMP DIMPLE BAR ................... 400
MICRO-DEX BORING BARS ....................... 406
MICRO-MINI TWIN BORING BARS .............. 410
MICRO-MINI BORING BARS ....................... 417
F TYPE BORING BARS ............................... 418
S TYPE BORING BARS............................... 424
P TYPE BORING BARS............................... 437
M TYPE BORING BARS .............................. 444
D TYPE BORING HEAD .............................. 445
AL TYPE BORING BARS ............................. 451
381
BORING BARS
IDENTIFICATION
y DIMPLE BAR nMin.Cutting Diameter mShank Diameter
(mm) (mm)
10 10 22 22 08 8
cInsert Shape vCutting Angle 12 12 25 25 10 10
C RHOMBIC 80° U 93° 13 13 30 30 12 12
D RHOMBIC 55° L 95° bInsert Clearance 14 14 32 32 16 16
T TRIANGULAR 60° Q 107°30´ B 5° 16 16 34 34 20 20
zFunction xClamp Structure V RHOMBIC 35° P 117°30´ C 7° 18 18 40 40 25 25
F Fixed type S Screw-on W TRIGON J 142° P 11° 20 20 32 32
, . / u
11
F S C L C 10 08 R - 06 E - 2/3
BORING BARS
z x c v b n m
,Hand of Tool .Cutting Edge Length (mm) /Shank Material 11 Tool Length (Carbide shank only) (mm)
u
R Right Hand Inscribed circle 4.76 5.56 6.35 7.94 9.525 E Carbide Shank Shank Dia. 8 10 12 16 20
of insert
L Left Hand RHOMBIC 80° – – 06 0.8 09 S Steel Shank No symbol 140 160 180 220 250
RHOMBIC 55° – – 07 – 11 2/3 90 105 120 145 165
TRIANGULAR 60° 08 09 11 – 16 1/2 70 80 90 110 125
RHOMBIC 35° 08 – 11 – 16
TRIGON L3 – 04 – 06
S 16 M S C L C R 09
z x c v b n m , .
cTool Length
zShank Material (mm) vClamp Structure bInsert Shape mInsert Clearance ,Hand of Tool
Steel Shank F 80 P Lever Lock C RHOMBIC 80° C 7°Positive R Right Hand
A with Coolant Hole
H 100 S Screw-on D RHOMBIC 55° E 20°Positive L Left Hand
C Carbide Shank
K 125 S SQUARE 90° N 0°
Carbide Shank
E with Coolant Hole M 150 T TRIANGULAR 60° P 11°Positive
S Steel Shank Q 180 V RHOMBIC 35°
R 200 W TRIGON
S 250
T 300
xShank Diameter U 350
(mm) V 400 nCutting Angle .Cutting Edge Length (mm)
Inscribed circle 6.35 7.94 9.525 12.70 19.05
08 8 F 91° o
f insert
10 10 K 75° RHOMBIC 80° 06 08 09 12 19
12 12 L 95° RHOMBIC 55° 07 – 11 15 –
16 16 Q 107°30´ SQUARE 90° – – 09 12 19
20 20 U 93° TRIANGULAR 60° 11 – 16 22 –
25 25 RHOMBIC 35° 11 – 16 – –
32 32
40 40
382
BORING BARS
Highly rigid steel shank and a lightweight head configuration Chip disposal is improved by having
designed by computer simulation analysis reduces chatter two channels for chip evacuation.
and improves the vibration damping properties.
The lightweight head with its large
dimple reduces chatter.
BORING BARS
"F and FS" breakers improves the quality
of the surface finish, "MV" breaker offers
excellent chip disposal. High wear
resistant CBN inserts are also available
for the machining of hardened materials.
y VIBRATION RESISTANCE
Weight of the
a DIMPLE BAR Head
Damping Time
49.7g 15.8ms
* Tl/d=5,
he simulation data stated above was conducted with a FSCLP1816R-09S holder, under the following conditions;
depth of cut=0.5mm, and feed=0.05mm/rev.
y Direction for the use of CCG/MT • CPG/MT • CPMX • TPG/MX type inserts
By changing the clamp screw, it is possible to use the inserts listed in the table below.
Holder : FSCLC/P • FSCLC/P...E Holder : FSTUP • FSTUP...E
Insert Number Clamp Screw Insert Number Clamp Screw
CCG/MT0602oo (& 6.35) Can be used as it is. TPG/MX0802oo (& 4.76) Change to CS200T
CPG/MT0802oo (& 7.94) Change to TS3 TPG/MX0902oo (& 5.56) Change to CS250T
CPG/MT0903oo (& 9.525) Change to TS4 TPG/MX1103oo (& 9.525) Change to CS300890T
*(Note
If the screw is too long the please shorten as necessary.
) TPMT/W09, W11 types cannot be used due to a different clamp screw size.
383
BORING BARS
CLASSIFICATION
KAPR=75° KAPR=91° KAPR=93° KAPR=93° K
KAPR
Name of Tool Holder Features KAPR KAPR
MICRO-DEX a
a
The minimum cutting diameter is from &5.
7°positive insert.
Boring Bars a Carbide shank type.
(Carbide Shank) a Easy-to-use tool geometries.
a Suitable for small workpieces.
SWUB STUC SCLC
a l/d is 5 times the diameter. ^ 407 ^ 408 ^ 406
384
BORING BARS
CLASSIFICATION
PR=93° KAPR=93° KAPR=95° KAPR=107.5° ─ 117.5° KAPR=142° KAPR=3°,5° Selection Standard
KAPR
Small Diameter
Coolant Hole
Clamp Rigidity
Economical
Specialized
KAPR
ance (Sharpness)
Resisiance
KAPR KAPR
Operation
KAPR
Efficiency
KAPR
Vibration
Cutting
e
*
e e e
*
SDUC FSVUB/C FSWUB/P FSCLC/P FSDQC FSVPB/C FSVJB/C
^ 390 ^ 396 ^ 394 ^ 386 ^ 392 ^ 397 ^ 398
BORING BARS
DVUN DCLN DWLN
^ 404 ^ 400 ^ 405
u u
* u
*
FCTU FSWL
^ 420 ^ 422
u u
*
SVUC SCLC SDQC SVQC SCZC
^ 435 ^ 428 ^ 430 ^ 432 ^ 436
e u e e
PCLN PWLN PDQN PDZN
^ 440 ^ 441 ^ 442 ^ 443
e u e
DPCL DPDH DPVP
^ 447 ^ 448 ^ 449
e e u e
MWLN
^ 444
e u e
e e
STUC SCLC
^ 408 ^ 406
e e e
CBooRS(-B) CR
^ 410 ^ 412
e e
*
(Note 3) Indicates that the shank material is carbide.
385
BORING BARS
KAPR
WF
95° GAMF LDRED H
DMIN LF DCON
GAMP
5°
※GAMP:FSCL108R/L-06S = 1° Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
FP FM LP LM MP MM
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
386
BORING BARS
Product Information GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 138
95° CBN TURNING INSERTS >> 244 PCD TURNING INSERTS >> 272
KAPR SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
ISO13399 PROPERTY >> 1966
KAPR
WF
95° GAMF LDRED H
DMIN LF DCON
GAMP
5°
※GAMP:FSCL108R/L-06E = 1° Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
FP FM LP LM MP MM
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
387
BORING BARS
KAPR
WF
93° GAMF LDRED
H
DMIN LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
388
BORING BARS
Product Information GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 158
93° CBN TURNING INSERTS >> 254 PCD TURNING INSERTS >> 277
KAPR SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
ISO13399 PROPERTY >> 1966
KAPR
WF
93° GAMF LDRED H
DMIN LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
389
BORING BARS
KAPR
WF
WF2
93° GAMF H
DMIN LDRED DCON
LF
GAMP
0°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
WF2
L/R
WF
LF
l/d
H
Clamp Screw Wrench
FSDUC1410R-07S ● R DC**0702 10 150 18 8.3 3.3 9 7.5° 14 3.5 93° TS25 TKY08F
FSDUC1612R-07S ● R DC**0702 12 150 20 9.3 3.3 11 6° 16 4 93° TS25 TKY08F
FSDUC2016R-07S ● R DC**0702 16 180 20 11.3 3.3 15 5° 20 5 93° TS25 TKY08F
FSDUC3220R-11S ● R DC**11T3 20 180 22.5 16.1 6.1 19 5° 32 5 93° TS43 TKY15F
FSDUC1410L-07S ● L DC**0702 10 150 18 8.3 3.3 9 7.5° 14 3.5 93° TS25 TKY08F
FSDUC1612L-07S ● L DC**0702 12 150 20 9.3 3.3 11 6° 16 4 93° TS25 TKY08F
FSDUC2016L-07S ● L DC**0702 16 180 20 11.3 3.3 15 5° 20 5 93° TS25 TKY08F
FSDUC3220L-11S ● L DC**11T3 20 180 22.5 16.1 6.1 19 5° 32 5 93° TS43 TKY15F
FP FM LP LM MP MM RL-F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
390
BORING BARS
Product Information TURNING INSERTS >> 145 CBN TURNING INSERTS >> 249
93° PCD TURNING INSERTS >> 274 SPARE PARTS >> 1927
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
WF
WF2
93° GAMF
H
DMIN LDRED
LF DCON
GAMP
0°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
WF2
L/R
WF
LF
l/d
H
Clamp Screw Wrench
FSDUC1410R-07E ● R DC**0702 10 160 16 8.3 3.3 9 7.5° 14 7.5 93° TS25 TKY08F
FSDUC1612R-07E ● R DC**0702 12 180 17.8 9.3 3.3 11 6° 16 8 93° TS25 TKY08F
FSDUC2016R-07E ● R DC**0702 16 220 21.8 11.3 3.3 15 5° 20 8 93° TS25 TKY08F
FSDUC3220R-11E ● R DC**11T3 20 250 24 16.1 6.1 19 5° 32 8 93° TS43 TKY15F
FSDUC1410L-07E ● L DC**0702 10 160 16 8.3 3.3 9 7.5° 14 7.5 93° TS25 TKY08F
FSDUC1612L-07E ● L DC**0702 12 180 17.8 9.3 3.3 11 6° 16 8 93° TS25 TKY08F
FSDUC2016L-07E ● L DC**0702 16 220 21.8 11.3 3.3 15 5° 20 8 93° TS25 TKY08F
FSDUC3220L-11E ● L DC**11T3 20 250 24 16.1 6.1 19 5° 32 8 93° TS43 TKY15F
FP FM LP LM MP MM RL-F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
391
BORING BARS
KAPR
WF
WF2
107.5° GAMF
H
DMIN LDRED
LF DCON
GAMP
0°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
WF2
L/R
WF
LF
l/d
H
Clamp Screw Wrench
FSDQC1310R-07S ● R DC**0702 10 150 20.5 7.6 2.6 9 8° 13 3.5 107.5° TS25 TKY08F
FSDQC1612R-07S ● R DC**0702 12 150 22.5 8.6 2.6 11 6° 16 4 107.5° TS25 TKY08F
FSDQC2016R-07S ● R DC**0702 16 180 22.5 10.6 2.6 15 5° 20 5 107.5° TS25 TKY08F
FSDQC2520R-11S ● R DC**11T3 20 180 26 13.7 3.7 19 7° 25 5 107.5° TS43 TKY15F
FSDQC1310L-07S ● L DC**0702 10 150 20.5 7.6 2.6 9 8° 13 3.5 107.5° TS25 TKY08F
FSDQC1612L-07S ● L DC**0702 12 150 22.5 8.6 2.6 11 6° 16 4 107.5° TS25 TKY08F
FSDQC2016L-07S ● L DC**0702 16 180 22.5 10.6 2.6 15 5° 20 5 107.5° TS25 TKY08F
FSDQC2520L-11S ● L DC**11T3 20 180 26 13.7 3.7 19 7° 25 5 107.5° TS43 TKY15F
FP FM LP LM MP MM RL-F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
392
BORING BARS
Product Information TURNING INSERTS >> 145 CBN TURNING INSERTS >> 249
107° PCD TURNING INSERTS >> 274 SPARE PARTS >> 1927
30´
KAPR TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
WF
WF2
107.5° GAMF
H
DMIN LDRED
LF DCON
GAMP
0°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
WF2
L/R
WF
LF
l/d
H
Clamp Screw Wrench
FSDQC1310R-07E ● R DC**0702 10 162 18.4 7.6 2.6 9 8° 13 7.5 107.5° TS25 TKY08F
FSDQC1612R-07E ● R DC**0702 12 182 20.2 8.6 2.6 11 6° 16 8 107.5° TS25 TKY08F
FSDQC2016R-07E ● R DC**0702 16 222 24.2 10.6 2.6 15 5° 20 8 107.5° TS25 TKY08F
FSDQC2520R-11E ● R DC**11T3 20 254 28 13.7 3.7 19 7° 25 8 107.5° TS43 TKY15F
FSDQC1310L-07E ● L DC**0702 10 162 18.4 7.6 2.6 9 8° 13 7.5 107.5° TS25 TKY08F
FSDQC1612L-07E ● L DC**0702 12 182 20.2 8.6 2.6 11 6° 16 8 107.5° TS25 TKY08F
FSDQC2016L-07E ● L DC**0702 16 222 24.2 10.6 2.6 15 5° 20 8 107.5° TS25 TKY08F
FSDQC2520L-11E ● L DC**11T3 20 254 28 13.7 3.7 19 7° 25 8 107.5° TS43 TKY15F
FP FM LP LM MP MM RL-F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
393
BORING BARS
KAPR
WF
93° GAMF
DMIN LDRED H
LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
R/L-F・FS MV
(L3,04,06) (L3,04,06)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
394
BORING BARS
Product Information TURNING INSERTS >> 166 PCD TURNING INSERTS >> 282
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
93° GAMF
DMIN LDRED H
LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
R/L-F・FS MV
(L3,04,06) (L3,04,06)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
395
BORING BARS
KAPR
WF
WF2
GAMF
93°
DMIN LDRED H
LF DCON
GAMP
0°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
WF2
L/R
WF
LF
l/d
H
Shim Shim Pin Clamp Screw Wrench
FP FM LP LM MP MM Standard
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
396
BORING BARS
KAPR
WF
WF2
117.5° GAMF
DMIN H
LDRED
LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
WF2
L/R
WF
LF
l/d
H
Shim Shim Pin Clamp Screw Wrench
FP FM LP LM MP MM Standard
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
397
BORING BARS
KAPR
WF
142°
GAMF
DMIN LDRED H
LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
Order Number Inserts
l/d
H
Clamp Screw Wrench
FP FM LP LM MV
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
398
BORING BARS
BORING BARS
z MC6025 130 (80 ─180) 0.25 (0.15 ─ 0.35) ─2.0 0.20 (0.15 ─ 0.25) ─1.5
Medium MP
x MP3025 100 (60 ─150) 0.25 (0.15 ─ 0.35) ─2.0 0.20 (0.15 ─ 0.25) ─1.5
M Finish FM z VP15TF 150 (110 ─190) 0.10 (0.05 ─ 0.15) ─ 0.5 0.10 (0.05 ─ 0.15) ─ 0.5
z MC7025 125 (85 ─165) 0.20 (0.10 ─ 0.25) ─1.0 0.15 (0.05 ─ 0.20) ─1.0
Stainless Steel Light LM
< 200HB
x VP15TF 130 (90 ─170) 0.20 (0.10 ─ 0.25) ─1.0 0.15 (0.05 ─ 0.20) ─1.0
z MC7025 105 (70 ─135) 0.20 (0.15 ─ 0.25) ─2.0 0.20 (0.15 ─ 0.25) ─1.0
Medium MM
x VP15TF 120 (80 ─160) 0.20 (0.15 ─ 0.25) ─2.0 0.20 (0.15 ─ 0.25) ─1.0
K Gray Cast Iron Finish F, FS z HTi10 130 (90 ─160) 0.15 (0.10 ─ 0.20) ─ 0.5 0.15 (0.10 ─ 0.20) ─ 0.5
Tensile Strength
< 350MPa Medium MK z MC5015 90 (60 ─120) 0.20 (0.15 ─ 0.25) ─2.0 0.20 (0.15 ─ 0.25) ─1.5
N F, FS z HTi10 300 (200 ─ 400) 0.10 (0.05 ─ 0.15) ─ 0.5 0.10 (0.05 ─ 0.15) ─ 0.5
Aluminium Alloy Finish
Flat Top z MD220 200 (150 ─250) 0.10 (0.05 ─ 0.15) ─2.0 0.10 (0.05 ─ 0.15) ─1.0
H Heat Treated Steel 35─65HRC Finish Flat Top z MB8025 100 (80 ─200) 0.10 (0.05 ─ 0.15) ─ 0.15 0.10 (0.05 ─ 0.15) ─ 0.1
399
BORING BARS
DOUBLE CLAMP
DCLN DIMPLE BAR
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 102
With coolant hole
Product Information CBN TURNING INSERTS >> 222 PCD TURNING INSERTS >> 266
95° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
95° GAMF
LDRED H
DMIN LF DCON
GAMP
6°
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
A25R-DCLNR12 ● R CN**1204 25 200 40 17 23 13° 32 95° LLSCP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DCLNR12 ● R CN**1204 32 250 50 22 30 13° 40 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A40T-DCLNR12 ● R CN**1204 40 300 63 27 37 10° 50 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A25R-DCLNL12 ● L CN**1204 25 200 40 17 23 13° 32 95° LLSCP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DCLNL12 ● L CN**1204 32 250 50 22 30 13° 40 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A40T-DCLNL12 ● L CN**1204 40 300 63 27 37 10° 50 95° LLSCN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
400
BORING BARS
DOUBLE CLAMP
DDUN GRADES AND CHIP BREAKERS >> 38
DIMPLE BAR
TURNING INSERTS >> 108
With coolant hole
Product Information CBN TURNING INSERTS >> 226 PCD TURNING INSERTS >> 267
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
93° GAMF
LDRED H
DMIN LF DCON
GAMP
6°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
A25R-DDUNR15 ● R DN**1504 25 200 40 17 23 13° 35 93° LLSDP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DDUNR15 ● R DN**1504 32 250 50 22 30 13° 40 93° LLSDN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A40T-DDUNR15 ● R DN**1504 40 300 63 27 37 10° 50 93° LLSDN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A25R-DDUNL15 ● L DN**1504 25 200 40 17 23 13° 35 93° LLSDP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DDUNL15 ● L DN**1504 32 250 50 22 30 13° 40 93° LLSDN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A40T-DDUNL15 ● L DN**1504 40 300 63 27 37 10° 50 93° LLSDN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60 ─100) 0.25 (0.1─ 0.4) ─ 5.0 80 (60 ─100) 0.2 (0.1─ 0.3) ─ 4.0
< 350MPa
401
BORING BARS
DOUBLE CLAMP
DSKN DIMPLE BAR
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 115
With coolant hole
Product Information CBN TURNING INSERTS >> 230 PCD TURNING INSERTS >> 268
75° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
75° GAMF
LDRED H
DMIN LF DCON
GAMP
6°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
H
Shim Shim Pin Clamp Bridge Spring Clamp Screw Wrench
A25R-DSKNR12 ● R SN**1204 25 200 40 17 23 13° 32 75° LLSSP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DSKNR12 ● R SN**1204 32 250 50 22 30 13° 40 75° LLSSN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A25R-DSKNL12 ● L SN**1204 25 200 40 17 23 13° 32 75° LLSSP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DSKNL12 ● L SN**1204 32 250 50 22 30 13° 40 75° LLSSN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
402
BORING BARS
DOUBLE CLAMP
DTFN GRADES AND CHIP BREAKERS >> 38
DIMPLE BAR
TURNING INSERTS >> 121
With coolant hole
Product Information CBN TURNING INSERTS >> 232 PCD TURNING INSERTS >> 269
91° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
GAMF
91° LDRED H
DMIN LF DCON
GAMP
6°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
H
Shim Shim Pin Clamp Bridge Spring Clamp Screw Wrench
A25R-DTFNR16 ● R TN**1604 25 200 40 17 23 13° 32 91° LLSTP32 LLP23 DCK2211 DCS2 DC0520T TKY15F
A32S-DTFNR16 ● R TN**1604 32 250 50 22 30 13° 40 91° LLSTN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
A25R-DTFNL16 ● L TN**1604 25 200 40 17 23 13° 32 91° LLSTP32 LLP23 DCK2211 DCS2 DC0520T TKY15F
A32S-DTFNL16 ● L TN**1604 32 250 50 22 30 13° 40 91° LLSTN32 LLP23 DCK2211 DCS2 DC0520T TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
403
BORING BARS
DOUBLE CLAMP
DVUN GRADES AND CHIP BREAKERS >> 38
DIMPLE BAR
TURNING INSERTS >> 128
With coolant hole
Product Information CBN TURNING INSERTS >> 235 PCD TURNING INSERTS >> 270
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
GAMF
93° LDRED H
DMIN LF DCON
GAMP
5°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
H
Shim Shim Pin Clamp Bridge Spring Clamp Screw Wrench
A40T-DVUNR16 ● R VN**1604 40 300 63 27 37 9° 50 93° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
A40T-DVUNL16 ● L VN**1604 40 300 63 27 37 9° 50 93° DCSVN32 LLP13 DCK3113 DCS2 DC0520T TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60 ─100) 0.25 (0.1─ 0.4) ─ 5.0 80 (60 ─100) 0.2 (0.1─ 0.3) ─ 4.0
< 350MPa
404
BORING BARS
DOUBLE CLAMP
DWLN DIMPLE BAR
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 130
With coolant hole
Product Information CBN TURNING INSERTS >> 237 SPARE PARTS >> 1927
95° TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
KAPR
WF
95° GAMF H
LDRED
DMIN LF DCON
GAMP
6°
Right hand tool holder shown. Unit: mm
BORING BARS
LDRED
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
LF
H
Shim Shim Pin Clamp Bridge Spring Clamp Screw Wrench
A25R-DWLNR06 ● R WN**0604 25 200 40 17 23 13° 35 95° LLSWP32 LLP23 DCK2211 DCS2 DC0520T TKY15F
A25R-DWLNR08 ● R WN**0804 25 200 40 17 23 13° 35 95° LLSWP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DWLNR08 ● R WN**0804 32 250 50 22 30 13° 40 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A40T-DWLNR08 ● R WN**0804 40 300 63 27 37 10° 50 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A25R-DWLNL06 ● L WN**0604 25 200 40 17 23 13° 35 95° LLSWP32 LLP23 DCK2211 DCS2 DC0520T TKY15F
A25R-DWLNL08 ● L WN**0804 25 200 40 17 23 13° 35 95° LLSWP42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A32S-DWLNL08 ● L WN**0804 32 250 50 22 30 13° 40 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
A40T-DWLNL08 ● L WN**0804 40 300 63 27 37 10° 50 95° LLSWN42 LLP14 DCK2613 DCS1 DC0621T TKY20F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
405
BORING BARS
MICRO-DEX BORING
SCLC BARS
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 138
Carbide shank
Product Information CBN TURNING INSERTS >> 244 PCD TURNING INSERTS >> 272
95° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
WF
95°
DCON
GAMF
DMIN LF H
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
Order Number Inserts LF
H
Clamp Screw Wrench
L-F
(03,04) (03,04)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
P Carbon Steel, Alloy Steel NX2525 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
180─350HB
M Stainless Steel VP15TF 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
< 200HB
K Gray Cast Iron VP15TF 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
< 350MPa
406
BORING BARS
MICRO-DEX BORING
SWUB BARS
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 166
Carbide shank
Product Information SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
93° ISO13399 PROPERTY >> 1966
KAPR
KAPR
WF
93°
DCON
GAMF
DMIN LF H
BORING BARS
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
Order Number Inserts LF
H
Clamp Screw Wrench
L-F
(02,L3)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
P Carbon Steel, Alloy Steel NX2525 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
180─350HB
M Stainless Steel VP15TF 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
< 200HB
K Gray Cast Iron VP15TF 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
< 350MPa
407
BORING BARS
MICRO-DEX BORING
STUC BARS
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 155
Carbide shank
Product Information SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
93° ISO13399 PROPERTY >> 1966
KAPR
KAPR
WF
93°
WF2
0.35
DCON
GAMF
DMIN LF H
DCON
GAMF
KAPR
Stock
DMIN
L/R
WF
Order Number Inserts LF
H
Clamp Screw Wrench
L-F
(06)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
P Carbon Steel, Alloy Steel NX2525 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
180─350HB
M Stainless Steel VP15TF 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
< 200HB
K Gray Cast Iron VP15TF 80 (40─120) 0.03 (0.01─0.05) 0.2 (0.1─0.3) 3─5
< 350MPa
408
BORING BARS
STANDARD HOLDER
DCONMS
BD
BD
10
x c z 10 x c
z S12
v LF
20
LF
RBH158ppN, RBH16ppN,
RBH22ppN has a temporary set screw for different machine specifications. RBH190ppN
(Represented by number 4)
Dimensions(mm)
*Clamp Screw
Stock
Torque
BORING BARS
Order Number MICRO-DEX Wrench (N • m)
DCONMS DCONWS BD LF S10 S11 S12 z x c v
409
BORING BARS
Product Information
WF
WF2
5° DCON H
5°
* RE±0.015
2
L20
LF
LDRED
Stock Dimensions(mm)
Order Number Micro
Grain Coated
TF15 VP15TF
Breaker *
DMIN 1
l/d < 3 l/d>3
RE DCON LF L20 LDRED WF WF2 H Z
410
BORING BARS
BORING BARS
411
BORING BARS
Product Information
WF
DMIN
3°
RE
LU DCON H
LF
L20
BORING BARS
412
BORING BARS
8
10
WF
8
WF
B
20 L24
(Clamp)
L24 100
10
10
Dimensions(mm)
Micro-Mini Twin
Stock
BORING BARS
02RS(-B)
SBH1020R a 13 ─ 6─24 (6─10) ─ 12.9 02RS-0 p(B) ─ HSC04010 HKY30R 4.8
03RS(-B)
SBH1030R a 14 12.65 8.5─22 (9─15) 11─19.5 (12) 13.8 03RS-01(B) HSC05012 HKY40R 9.5
03RS-0 p(B)
05RS(-B)
SBH1050R a 16 13.65 13.5─37 (15─25) 15─35.5 (16) 15.6 05RS-01(B) HSC05012 HKY40R 9.5
05RS-0 p(B)
06RS(-B)
SBH1060R a 17 ─ 13.5─42 (18─30) ─ 16.5 ─ HSC05012 HKY40R 9.5
06RS-0 p(B)
07RS(-B)
SBH1070R a 18 ─ 13.5─52 (21─35) ─ 17.4 ─ HSC05012 HKY40R 9.5
07RS-0 p(B)
(Note) The MICRO-DEX and the MICRO-MINI cannot be fit to square holders.
* L24 is the length of overhang for sufficient clamping, and ( ) is the recommended length for machining of carbon and alloy steel.
413
BORING BARS
Cutting edge
Insert direction
s When using this type of holder, there is a possibility that damage to the shank and the 2nd cutting
Fig.2 3rd clamping screw
edge can occur. Make sure that the clamping screws are tightened to the set torque value.
Additionally make sure that there is no clamping screw near the 2nd cutting edge as this can 1 2 3
break the boring bar.
e When using Mitsubishi holders
Insert point 2nd cutting edge
When using holders with a tool overhang of recommended quantity, ensure that the 3rd clamping
screw is removed prior to machining. (RBH1620N, RBH19020N, RBH2020N and RBH2520N do
BORING BARS
not have the 3rd screw.) The set torque value for clamping screw is 2.0 N•m.
Holder : CR05RS-01B
Cutting Speed : 80m/min Depth of Cut
Feed : 0.05mm/rev
Depth of Cut : 0.05mm Depth of Cut Depth of Cut With depths of cut larger than the
Wet Cutting 2 2 corner radius value, burrs will be formed.
414
BORING BARS
DCON
D5
D5
D5
10 10
z 10 x c z 20 x c z S3 c v
LF LF 20 x
LF
RBH158ppN, RBH16ppN, RBH190ppN RBH20ppN, RBH25ppN, RBH254ppN RBH22ppN
BORING BARS
03RS(-B)
RBH15830N a 15.875 3 15 100 10 10 ─ 03FR-BLS 03RS-0p(B) 03RS-01(B) A A A ─ HKY20F 2.0
04RS(-B)
RBH15840N a 15.875 4 15 100 15 15 ─ 04FR-BLS 04RS-0p(B) 04RS-01(B) A A A ─ HKY20F 2.0
05RS(-B)
RBH15850N a 15.875 5 15 100 15 15 ─ 05HR-BLS 05RS-0p(B) 05RS-01(B) A A A ─ HKY20F 2.0
06RS(-B)
RBH15860N a 15.875 6 15 100 15 15 ─ ─ 06RS-0p(B) ─ A A A ─ HKY20F 2.0
07RS(-B)
RBH15870N a 15.875 7 15 100 20 20 ─ ─ 07RS-0p(B) ─ A A A ─ HKY20F 2.0
08RS(-B)
RBH15880N a 15.875 8 15 100 20 20 ─ ─ 08RS-0p(B) ─ D D D ─ HKY20F 2.0
02RS(-B)
RBH1620N a 16 2 15 100 10 ─ ─ ─ 02RS-0p(B) ─ B B ─ ─ HKY20F 2.0
03RS(-B)
RBH1630N a 16 3 15 100 10 10 ─ 03FR-BLS 03RS-0p(B) 03RS-01(B) A A A ─ HKY20F 2.0
04RS(-B)
RBH1640N a 16 4 15 100 15 15 ─ 04FR-BLS 04RS-0p(B) 04RS-01(B) A A A ─ HKY20F 2.0
05RS(-B)
RBH1650N a 16 5 15 100 15 15 ─ 05HR-BLS 05RS-0p(B) 05RS-01(B) A A A ─ HKY20F 2.0
06RS(-B)
RBH1660N a 16 6 15 100 15 15 ─ ─ 06RS-0p(B) ─ A A A ─ HKY20F 2.0
07RS(-B)
RBH1670N a 16 7 15 100 20 20 ─ ─ 07RS-0p(B) ─ A A A ─ HKY20F 2.0
08RS(-B)
RBH1680N a 16 8 15 100 20 20 ─ ─ 08RS-0p(B) ─ D D D ─ HKY20F 2.0
* 2
02RS(-B)
2 RBH19020N a 19.05 2 18 125 10 ─ ─ ─ 02RS-0p(B) ─ C C ─ ─ HKY20F 2.0
* 2
03RS(-B)
RBH19030N a 19.05 3 18 125 10 10 ─ 03FR-BLS 03RS-0p(B) 03RS-01(B) B B B ─ HKY20F 2.0
* 2
04RS(-B)
RBH19040N a 19.05 4 18 125 15 15 ─ 04FR-BLS 04RS-0p(B) 04RS-01(B) B B B ─ HKY20F 2.0
* 2
05RS(-B)
RBH19050N a 19.05 5 18 125 15 15 ─ 05HR-BLS 05RS-0p(B) 05RS-01(B) B B B ─ HKY20F 2.0
* 2
06RS(-B)
RBH19060N a 19.05 6 18 125 15 15 ─ ─ 06RS-0p(B) ─ B B B ─ HKY20F 2.0
*
07RS(-B)
RBH19070N a 19.05 7 18 125 20 20 ─ ─ 07RS-0p(B) ─ B B B ─ HKY20F 2.0
08RS(-B)
RBH19080N a 19.05 8 18 125 20 20 ─ ─ 08RS-0p(B) ─ A A A ─ HKY20F 2.0
02RS(-B)
RBH2020N a 20 2 11 125 10 ─ ─ ─ 02RS-0p(B) ─ A A ─ ─ HKY20F 2.0
03RS(-B)
RBH2030N a 20 3 12 125 10 10 ─ 03FR-BLS 03RS-0p(B) 03RS-01(B) A A B ─ HKY20F 2.0
04RS(-B)
RBH2040N a 20 4 13 125 15 15 ─ 04FR-BLS 04RS-0p(B) 04RS-01(B) A B B ─ HKY20F 2.0
05RS(-B)
RBH2050N a 20 5 14 125 15 15 ─ 05HR-BLS 05RS-0p(B) 05RS-01(B) A B B ─ HKY20F 2.0
06RS(-B)
RBH2060N a 20 6 15 125 15 15 ─ ─ 06RS-0p(B) ─ A B B ─ HKY20F 2.0
07RS(-B)
RBH2070N a 20 7 16 125 20 20 ─ ─ 07RS-0p(B) ─ A B B ─ HKY20F 2.0
08RS(-B)
RBH2080N a 20 8 17 125 20 20 ─ ─ 08RS-0p(B) ─ A A A ─ HKY20F 2.0
*1 Order number of clamp screw A=HSS04004, B=HSS04006, C=HSS04008, D=HSS04003 *2 Revised order number.
Conventional Order Number Revised Order Number Conventional Order Number Revised Order Number
RBH1920N RBH19020N RBH1950N RBH19050N
RBH1930N RBH19030N RBH1960N RBH19060N
RBH1940N RBH19040N RBH1970N RBH19070N
415
BORING BARS
DCON
D5
D5
D5
10 10
z 10 x c z 20 x c z S3 c v
LF LF 20 x
LF
RBH158ppN, RBH16ppN, RBH190ppN RBH20ppN, RBH25ppN, RBH254ppN RBH22ppN
03RS(-B)
RBH2230N a 22 3 12 125 10 10 10 03FR-BLS 03RS-0p(B) 03RS-01(B) A B C A HKY20F 2.0
04RS(-B)
RBH2240N a 22 4 13 125 15 15 12.5 04FR-BLS 04RS-0p(B) 04RS-01(B) A B B A HKY20F 2.0
05RS(-B)
RBH2250N a 22 5 14 125 15 15 12.5 05HR-BLS 05RS-0p(B) 05RS-01(B) A B B A HKY20F 2.0
06RS(-B)
RBH2260N a 22 6 15 125 15 15 15 ─ 06RS-0p(B) ─ A B B A HKY20F 2.0
07RS(-B)
RBH2270N a 22 7 16 125 20 20 15 ─ 07RS-0p(B) ─ A B B A HKY20F 2.0
08RS(-B)
RBH2280N a 22 8 17 125 20 20 15 ─ 08RS-0p(B) ─ A B B A HKY20F 2.0
02RS(-B)
RBH2520N a 25 2 11 150 10 ─ ─ ─ 02RS-0p(B) ─ A B ─ ─ HKY20F 2.0
03RS(-B)
RBH2530N a 25 3 12 150 10 10 ─ 03FR-BLS 03RS-0p(B) 03RS-01(B) A B C ─ HKY20F 2.0
04RS(-B)
RBH2540N a 25 4 13 150 15 15 ─ 04FR-BLS 04RS-0p(B) 04RS-01(B) A C C ─ HKY20F 2.0
05RS(-B)
RBH2550N a 25 5 14 150 15 15 ─ 05HR-BLS 05RS-0p(B) 05RS-01(B) A C C ─ HKY20F 2.0
06RS(-B)
RBH2560N a 25 6 15 150 15 15 ─ ─ 06RS-0p(B) ─ A C C ─ HKY20F 2.0
07RS(-B)
RBH2570N a 25 7 16 150 20 20 ─ ─ 07RS-0p(B) ─ A C C ─ HKY20F 2.0
08RS(-B)
RBH2580N a 25 8 17 150 20 20 ─ ─ 08RS-0p(B) ─ A B B ─ HKY20F 2.0
02RS(-B)
RBH25420N a 25.4 2 11 150 10 ─ ─ ─ 02RS-0p(B) ─ A B ─ ─ HKY20F 2.0
03RS(-B)
RBH25430N a 25.4 3 12 150 10 10 ─ 03FR-BLS 03RS-0p(B) 03RS-01(B) A B C ─ HKY20F 2.0
04RS(-B)
RBH25440N a 25.4 4 13 150 15 15 ─ 04FR-BLS 04RS-0p(B) 04RS-01(B) A C C ─ HKY20F 2.0
05RS(-B)
RBH25450N a 25.4 5 14 150 15 15 ─ 05HR-BLS 05RS-0p(B) 05RS-01(B) A C C ─ HKY20F 2.0
06RS(-B)
RBH25460N a 25.4 6 15 150 15 15 ─ ─ 06RS-0p(B) ─ A C C ─ HKY20F 2.0
07RS(-B)
RBH25470N a 25.4 7 16 150 20 20 ─ ─ 07RS-0p(B) ─ A C C ─ HKY20F 2.0
08RS(-B)
RBH25480N a 25.4 8 17 150 20 20 ─ ─ 08RS-0p(B) ─ A B B ─ HKY20F 2.0
*1 Order number of clamp screw A=HSS04004, B=HSS04006, C=HSS04008, D=HSS04003 *2 Revised order number.
Conventional Order Number Revised Order Number Conventional Order Number Revised Order Number
RBH1920N RBH19020N RBH1950N RBH19050N
RBH1930N RBH19030N RBH1960N RBH19060N
RBH1940N RBH19040N RBH1970N RBH19070N
416
BORING BARS
MICRO-MINI BORING
C-BLS ROUND TYPE HOLDER >> 412
BARS
TECHNICAL INFO >> 1971
Carbide shank
DCON
C03FR-BLS a 2.0 3 80 15 3.2 1.0 4°
F2
C04FR-BLS a 2.5 4 80 20 4.2 1.5 Flat area
BORING BARS
C05HR-BLS a 3.0 5 100 25 5.2 2.0 Flat area CW
* LDRED
DMIN
LF
180─350HB
40 (30─50) 0.05 (─ 0.1) 0.2 (0.1─0.3) 5 0.1─0.5 0.01─0.05
M Stainless Steel 40 (30─50) 0.05 (─ 0.1) 0.2 (0.1─0.3) 5 <0.4
<0.03
< 200HB (Honing not required)
K Gray Cast Iron 40 (30─50) 0.05 (─ 0.05) 0.2 (0.1─0.3) 5 0.1─0.5 0.01─0.05
< 350MPa
N <0.03
Non-Ferrous Meterial 80 (60─100) 0.05 (─ 0.1) 0.3 (0.1─0.5) 5 0.1─0.5 (Honing not required)
*Cutting edge is not honed. Please hone according to the workpiece before machining.
y GRINDING THE CUTTING EDGE OF MICRO-MINI BORING BAR
a M
ICRO-MINI boring bar can be applied to boring and grooving without any modifications. It can also be reground as shown below.
or shaping and regrinding, use a diamond whetstone approximately #250 ─ #400.
a F
Please grind according to the application using the figure below as a reference.
Grinding
1°–2°
25°
Grinding Examples
417
BORING BARS
KAPR
DMIN
93°
WF
93° GAMF
LDRED H
RE LF DCON
GAMP
5°
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
FSTU108R/L a a 0802pp 8 125 18 5 7 15° 10 0.4 CS200T TKY06F
TPGX
FSTU110R/L a a
TPMX 0902pp 10 150 22 6 9 13° 12 0.4 CS250T TKY08F
FSTU112R/L a a NP-TPGX 0902pp 12 180 25 8 11 10° 16 0.4 CS250T TKY08F
NP-TPMX
FSTU116R/L a a 1103pp 16 200 30 11 14 7° 22 0.4 CS300890T TKY08F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50 ─ 90) 0.2 (0.15 ─ 0.25) ─2.0 60 (40 ─ 80) 0.15 (0.1─ 0.2) ─1.0
N Light Cutting 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─2.0 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─1.5
418
BORING BARS
Product Information CBN TURNING INSERTS >> 254 PCD TURNING INSERTS >> 277
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
KAPR
DMIN
93°
WF
93° RE
LDRED
LF DCON
H
GAMF
GAMP
5°
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
FSTU208R/L a a 0802pp 8 125 13 5 7 15° 10 0.4 CS200T TKY06F
TPGX
FSTU210R/L a a
TPMX 0902pp 10 150 16 6 9 13° 12 0.4 CS250T TKY08F
FSTU212R/L a a NP-TPGX 0902pp 12 180 19 8 11 10° 16 0.4 CS250T TKY08F
NP-TPMX
FSTU216R/L a a 1103pp 16 200 26 11 14 7° 22 0.4 CS300890T TKY08F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50 ─ 90) 0.2 (0.15 ─ 0.25) ─2.0 60 (40 ─ 80) 0.15 (0.1─ 0.2) ─1.0
N Light Cutting 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─2.0 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─1.5
419
BORING BARS
KAPR
DMIN
93°
WF
93° GAMF RE
LDRED
LF
H
DCON
GAMP
5°
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Shim Shim Pin Clamp
Set
Breaker Wrench
Piece
FCTU116R/L a a 1103pp 16 200 30 11 14 7° 22 0.4 ─ ─ C3 CBT2N HKY25R
TPMN
FCTU120R/L a a
TPMR 1603pp 20 200 37 13 18 5° 26 0.8 ─ ─ C4 CBT3F HKY30R
FCTU125R/L a a TPGN 1603pp 25 250 40 16 22 5° 32 0.8 PT32 BCP202 C4 CBT3F HKY30R
(4 Side Flat Shank)
TPGR
FCTU132R/L a a 1603pp 32 300 45 20 29 0° 40 0.8 PT32 BCP201 C4 CBT3F HKY30R
(4 Side Flat Shank)
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50 ─ 90) 0.2 (0.15 ─ 0.25) ─2.0 60 (40 ─ 80) 0.15 (0.1─ 0.2) ─1.0
N Light Cutting 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─2.0 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─1.5
420
BORING BARS
Product Information CBN TURNING INSERTS >> 263 PCD TURNING INSERTS >> 287
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
DMIN
KAPR
93°
WF
93° GAMF RE
LDRED H
LF DCON
GAMP
5°
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R Shim Shim Pin Clamp
Set
Breaker Wrench
Piece
FCTU216R a TPMN 1103pp 16 200 26 11 14 7° 22 0.4 ─ ─ C3 CBT2N HKY25R
TPMR
FCTU220R a 1603pp 20 200 33 13 18 5° 26 0.8 ─ ─ C4 CBT3F HKY30R
TPGN
FCTU225R a TPGR 1603pp 25 250 37 16 22 5° 32 0.8 PT32 BCP202 C4 CBT3F HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50 ─ 90) 0.2 (0.15 ─ 0.25) ─2.0 60 (40 ─ 80) 0.15 (0.1─ 0.2) ─1.0
N Light Cutting 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─2.0 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─1.5
421
BORING BARS
DMIN LDRED H
KAPR
95°
WF
95° RE LF DCON
GAMF
LDRED
FSWL108R/LS
108R/LM
Right hand tool holder shown.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
WCMT
FSWL108R/LS a a
WCGT 0201pp 8 100 19 2.9 7 17° 5.8 0.4 TS21 TKY06F
WCMT
FSWL108R/LM a a WCGT
WCMW
L302pp 8 100 25 4 7 15° 8 0.4 TS2 TKY06F
Standard R/L
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
422
BORING BARS
Product Information CBN TURNING INSERTS >> 260 PCD TURNING INSERTS >> 281
95° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
DMIN LDRED H
KAPR
95°
WF
95° RE LF DCON
GAMF
LDRED
FSWL208R/LS
208R/LM
Right hand tool holder shown.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
WCMT
FSWL208R/LS a a
WCGT 0201pp 8 122 25 2.9 7 17° 5.8 0.4 TS21 TKY06F
WCMT
FSWL208R/LM a a WCGT
WCMW
L302pp 8 125 33 4 7 15° 8 0.4 TS2 TKY06F
Standard R/L
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
423
BORING BARS
ECA 60°
KAPR
91°
WF
91° RE LDRED H
GAMF
DMIN LF DCON
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
S08FSTFCR/L09 a a TCMT 0902pp 8 80 12 6 7 15° 11 0.4 TS22 TKY06F
S10HSTFCR/L11 a a 1102pp 10 100 16 7 9 13° 13 0.4 TS25 TKY08F
S12KSTFCR/L11 a a 1102pp 12 125 20 9 11 10° 16 0.4 TS25 TKY08F
S16MSTFCR/L11 a a
TCMW 1102pp 16 150 25 11 14 7° 20 0.4 TS25 TKY08F
S20QSTFCR/L16 a a TCMT 16T3pp 20 180 32 13 18 7° 25 0.8 TS4 TKY15F
S25RSTFCR/L16 a a 16T3pp 25 200 40 17 23 5° 32 0.8 TS4 TKY15F
S32SSTFCR/L16 a a 16T3pp 32 250 50 22 30 5° 40 0.8 TS4 TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
424
BORING BARS
Product Information CBN TURNING INSERTS >> 252 PCD TURNING INSERTS >> 276
91° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
ECA 60°
KAPR
91°
WF
91° RE LDRED H
GAMF
DMIN LF DCON
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R Clamp Screw Wrench
C08HSTFCR09 a TCMT 0902pp 8 100 12 6 7 15° 11 0.4 TS22 TKY06F
C10KSTFCR11 a 1102pp 10 125 16 7 9 13° 13 0.4 TS25 TKY08F
C12MSTFCR11 a 1102pp 12 150 20 9 11 10° 16 0.4 TS25 TKY08F
TCMW
C16RSTFCR11 a 1102pp 16 200 25 11 14 7° 20 0.4 TS25 TKY08F
TCMT
C20SSTFCR16 a 16T3pp 20 250 32 13 18 7° 25 0.8 TS4 TKY15F
C25TSTFCR16 a 16T3pp 25 300 40 17 23 5° 32 0.8 TS4 TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
425
BORING BARS
ECA 50°
KAPR
93°
WF
WF2
93° GAMF
RE
LDRED H
DMIN LF DCON
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R L Clamp Screw Wrench
S10HSDUCR/L07 a a 0702pp 10 100 16 7 2.4 9 13° 13 0.4 TS25 TKY08F
S12KSDUCR/L07 a a DCMT 0702pp 12 125 20 9 3.4 11 10° 16 0.4 TS25 TKY08F
DCET
S16MSDUCR/L07 a a 0702pp 16 150 25 11 3.9 14 7° 20 0.4 TS25 TKY08F
DCGT
S20QSDUCR/L11 a a DCMW 11T3pp 20 180 32 13 4.4 18 7° 25 0.8 TS4 TKY15F
DCGW
S25RSDUCR/L15 a a
NP-DCGW 1504pp 25 200 40 17 6.9 23 5° 32 0.8 TS5 TKY25F
S32SSDUCR/L15 a a NP-DCMT 1504pp 32 250 50 22 8.4 30 5° 40 0.8 TS5 TKY25F
S40TSDUCR/L15 a a 1504pp 40 300 63 27 9.4 37 5° 50 0.8 TS5 TKY25F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
426
BORING BARS
Product Information CBN TURNING INSERTS >> 249 PCD TURNING INSERTS >> 274
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
ECA 50°
KAPR
93°
WF
93°
WF2
RE
GAMF
LDRED H
DMIN LF DCON
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R Clamp Screw Wrench
DCMT
C10KSDUCR07 a 0702pp 10 125 16 7 2.1 9 13° 13 0.4 TS25 TKY08F
DCET
C12MSDUCR07 a DCGT 0702pp 12 150 20 9 3.1 11 10° 16 0.4 TS25 TKY08F
DCMW
C16RSDUCR07 a DCGW 0702pp 16 200 25 11 3.1 14 7° 20 0.4 TS25 TKY08F
NP-DCGW
C20SSDUCR11 a NP-DCMT 11T3pp 20 250 32 13 3.1 18 7° 25 0.8 TS4 TKY15F
DCMW
C25TSDUCR15 a
DCMT 1504pp 25 300 40 17 4.9 23 5° 32 0.8 TS5 TKY25F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
427
BORING BARS
ECA 60°
KAPR
95°
95°
WF
RE LDRED H
GAMF
DMIN LF DCON
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
S08FSCLCR/L06 a a 0602pp 8 80 12 6 7 15° 11 0.4 TS25 TKY08F
S10HSCLCR/L06 a a 0602pp 10 100 16 7 9 13° 13 0.4 TS25 TKY08F
CCMH
S12KSCLCR/L06 a a
CCMT 0602pp 12 125 20 9 11 10° 16 0.4 TS25 TKY08F
S16MSCLCR/L09 a a CCET 09T3pp 16 150 25 11 14 7° 20 0.8 TS4 TKY15F
CCGT
S20QSCLCR/L09 a a CCMW 09T3pp 20 180 32 13 18 7° 25 0.8 TS4 TKY15F
S25RSCLCR/L12 a a CCGW 1204pp 25 200 40 17 23 5° 32 0.8 TS5 TKY25F
NP-CCGW
S32SSCLCR/L12 a a 1204pp 32 250 50 22 30 5° 40 0.8 TS5 TKY25F
S40TSCLCR/L12 a a 1204pp 40 300 63 27 37 5° 50 0.8 TS5 TKY25F
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
428
BORING BARS
Product Information CBN TURNING INSERTS >> 244 PCD TURNING INSERTS >> 272
95° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
ECA 60°
KAPR
95°
95°
WF
RE LDRED H
GAMF
DMIN LF DCON
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R Clamp Screw Wrench
C08HSCLCR06 a CCMH 0602pp 8 100 12 6 7 15° 11 0.4 TS25 TKY08F
CCMT
C10KSCLCR06 a 0602pp 10 125 16 7 9 13° 13 0.4 TS25 TKY08F
CCET
C12MSCLCR06 a CCGT 0602pp 12 150 20 9 11 10° 16 0.4 TS25 TKY08F
CCMW
C16RSCLCR09 a
CCGW 09T3pp 16 200 25 11 14 7° 20 0.8 TS4 TKY15F
C20SSCLCR09 a NP-CCGW 09T3pp 20 250 32 13 18 7° 25 0.8 TS4 TKY15F
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
429
BORING BARS
WF
107.5°
WF2
RE
GAMF
LDRED H
DMIN LF DCON
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R L Clamp Screw Wrench
S10HSDQCR/L07 a a 0702pp 10 100 16 7 2.4 9 13° 13 0.4 TS25 TKY08F
S12KSDQCR/L07 a a DCMT 0702pp 12 125 20 9 3.4 11 10° 16 0.4 TS25 TKY08F
DCET
S16MSDQCR/L07 a a 0702pp 16 150 25 11 3.9 14 7° 20 0.4 TS25 TKY08F
DCGT
S20QSDQCR/L11 a a DCMW 11T3pp 20 180 32 13 4.4 18 7° 25 0.8 TS4 TKY15F
DCGW
S25RSDQCR/L15 a a
NP-DCMW 1504pp 25 200 40 17 6.9 23 5° 32 0.8 TS5 TKY25F
S32SSDQCR15 a NP-DCMT 1504pp 32 250 50 22 8.4 30 5° 40 0.8 TS5 TKY25F
S40TSDQCR15 a 1504pp 40 300 63 27 9.4 37 5° 50 0.8 TS5 TKY25F
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
430
BORING BARS
Product Information CBN TURNING INSERTS >> 249 PCD TURNING INSERTS >> 274
107° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
30´
KAPR ISO13399 PROPERTY >> 1966
WF
107.5°
WF2
RE
GAMF
LDRED H
DMIN LF DCON
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R Clamp Screw Wrench
C10KSDQCR07 a DCMT 0702pp 10 125 16 7 2.1 9 13° 13 0.4 TS25 TKY08F
DCET
C12MSDQCR07 a DCGT 0702pp 12 150 20 9 3.1 11 10° 16 0.4 TS25 TKY08F
DCMW
C16RSDQCR07 a DCGW 0702pp 16 200 25 11 3.1 14 7° 20 0.4 TS25 TKY08F
NP-DCMW
C20SSDQCR11 a NP-DCMT 11T3pp 20 250 32 13 3.1 18 7° 25 0.8 TS4 TKY15F
DCMW
C25TSDQCR15 a
DCMT 1504pp 25 300 40 17 4.9 23 5° 32 0.8 TS5 TKY25F
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
431
BORING BARS
WF
117.5°
WF2
RE
GAMF
LDRED H
DMIN LF DCON
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R L Clamp Screw Wrench
S16MSVQCR/L11 a a 1103pp 16 150 25 11 3.9 14 7° 20 0.4 TS25 TKY08F
S20QSVQCR/L11 a a 1103pp 20 180 32 13 4.4 18 7° 25 0.4 TS25 TKY08F
VCMW
S25RSVQCR/L16 a a 1604pp 25 200 40 17 6.9 23 5° 32 0.8 TS4 TKY15F
VCMT
S32SSVQCR/L16 a a 1604pp 32 250 50 22 8.4 30 5° 40 0.8 TS4 TKY15F
S40TSVQCR16 a 1604pp 40 300 63 27 9.4 37 5° 50 0.8 TS4 TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
432
BORING BARS
Product Information CBN TURNING INSERTS >> 259 PCD TURNING INSERTS >> 280
117° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
30´
KAPR ISO13399 PROPERTY >> 1966
WF
117.5°
WF2
RE
GAMF
LDRED H
DMIN LF DCON
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R Clamp Screw Wrench
C16RSVQCR11 a 1103pp 16 200 25 11 3.1 14 7° 20 0.4 TS25 TKY08F
VCMT
C20SSVQCR11 a 1103pp 20 250 32 13 3.1 18 7° 25 0.4 TS25 TKY08F
VCMW
C25TSVQCR16 a 1604pp 25 300 40 17 4.9 23 5° 32 0.8 TS4 TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
433
BORING BARS
ECA 60°
KAPR
75°
WF
75° RE
GAMF LDRED H
DMIN LF DCON
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H GAMF DMIN RE
R L Clamp Screw Wrench
S16MSSKCR/L09 a a 09T3pp 16 150 25 11 14 7° 20 0.8 TS4 TKY15F
SCMW
S20QSSKCR/L09 a a 09T3pp 20 180 32 13 18 7° 25 0.8 TS4 TKY15F
SCMT
S25RSSKCR/L12 a a 1204pp 25 200 40 17 23 5° 32 0.8 TS5 TKY25F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
434
BORING BARS
ECA 50°
KAPR
93°
WF
93°
WF2
RE
GAMF
LDRED H
DMIN LF DCON
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF WF2 H GAMF DMIN RE
R L Clamp Screw Wrench
S20QSVUCR/L11 a a 1103pp 20 180 32 13 4.4 18 7° 25 0.4 TS25 TKY08F
S25RSVUCR/L16 a a
VCMW 1604pp 25 200 40 17 6.9 23 5° 32 0.8 TS4 TKY15F
S32SSVUCR/L16 a a VCMT 1604pp 32 250 50 22 8.4 30 5° 40 0.8 TS4 TKY15F
S40TSVUCR/L16 a a 1604pp 40 300 63 27 9.4 37 5° 50 0.8 TS4 TKY15F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100─180) 0.1 (0.05─0.15) 0.2 140 (100─180) 0.1 (0.05─0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50─90) 0.2 (0.15─0.25) ─2.0 60 (40─80) 0.15 (0.1─0.2) ─1.0
N Light Cutting 300 (200─400) 0.1 (0.05─0.15) 0.2 300 (200─400) 0.1 (0.05─0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150─250) 0.1 (0.05─0.15) ─2.0 200 (150─250) 0.1 (0.05─0.15) ─1.5
435
BORING BARS
95°
WF
KAPR
95°
WF2
GAMF H
LH RE
DMIN LF DCON
LDRED
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED LH WF WF2 H GAMF DMIN RE
R L Clamp Screw Wrench
CCMH
S16MSCZCR/L06 a a CCMT 0602pp 16 150 36 11 11 3 14 10° 20 0.4 TS25 TKY08F
CCET
S20QSCZCR/L09 a a CCGT
CCMW
09T3pp 20 180 50 18 13 3 18 7° 25 0.8 TS4 TKY15F
FP FM LP LM MP MM Flat Top
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
M Light Cutting 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2 140 (100 ─180) 0.1 (0.05 ─ 0.15) 0.2
Stainless Steel < 200HB
Medium Cutting 70 (50 ─ 90) 0.2 (0.15 ─ 0.25) ─2.0 60 (40 ─ 80) 0.15 (0.1─ 0.2) ─1.0
N Light Cutting 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2 300 (200 ─ 400) 0.1 (0.05 ─ 0.15) 0.2
Aluminium Alloy ─
Medium Cutting 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─2.0 200 (150 ─250) 0.1 (0.05 ─ 0.15) ─1.5
436
BORING BARS
Product Information CBN TURNING INSERTS >> 230 PCD TURNING INSERTS >> 268
75° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
IN
DM
KAPR
75°
WF
75° GAMF
RE LDRED H
GAMP LF DCON
6°
BORING BARS
Dimensions(mm) *2 *2
Stock
Order Number Insert Number
LDRED
DCON
GAMF
DMIN
WF
RE
R L
LF
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
437
BORING BARS
Product Information CBN TURNING INSERTS >> 232 PCD TURNING INSERTS >> 269
91° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
DMIN
KAPR
91°
WF
91° GAMF
RE LDRED H
DCON
LF
GAMP
6°
Dimensions(mm) *2 *2
Stock
Order Number Insert Number
LDRED
DCON
GAMF
DMIN
WF
RE
R L
LF
HGM- HKY15R
A20QPTFNR/L16 a a 1604pp 20 180 32 13 18 15° 25 0.8 ─ ─ ─ ─ PT1/8 HP31 P208AM HSS03005
HKY25R
TNMA HGM- HKY15R
A25RPTFNR/L16 a a 1604pp 25 200 40 17 23 13° 32 0.8 MLTP32 ─ ─ ─ PT1/4 HP33 P208AM HSS03005
HKY25R
TNMG
HGM-
A32SPTFNR/L16 a a TNMM 1604pp 32 250 50 22 30 13° 44 0.8 LLSTN32 LLP13 LLCL13 LLCS106 HKY25R PT3/8 ─ ─ ─
TNGA HGM-
A40TPTFNR/L22 a a
TNGG 2204
pp 40 300 63 27 37 10° 54 0.8 LLSTN42 LLP14 LLCL14 LLCS108S HKY30R PT3/8 ─ ─ ─
HGM-
A50UPTFNR/L22 a a 2204pp 50 350 80 35 47 9° 70 0.8 LLSTN42 LLP14 LLCL14 LLCS108S HKY30R PT3/8 ─ ─ ─
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
438
BORING BARS
Product Information CBN TURNING INSERTS >> 226 PCD TURNING INSERTS >> 267
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
IN
DM KAPR
93°
WF
WF2
GAMF
93° RE
LDRED
H
GAMP LF DCON
6°
BORING BARS
Dimensions(mm) *2 *2
Stock
Order Number Insert Number
LDRED
DCON
GAMF
DMIN
WF2
WF
RE
R L
LF
HGM-
A20QPDUNR/L11 a a 1104pp 20 180 32 15 6.4 18 13° 26 0.8 ─ ─ LLCL23S LLCS125 HKY20R PT1/8 ─ ─ ─
HGM-
A25RPDUNR/L11 a a 1104pp 25 200 40 17 6.9 23 15° 32 0.8 LLSDN32 LLP13 LLCL23 LLCS106 HKY25R PT1/4 ─ ─ ─
DNMA
HKY15R HGM-
A25RPDUNR/L15 a a DNMG 1504pp 25 200 40 17 6.9 23 13° 32 0.8 MLDP42 ─ ─ ─ HKY30R PT1/4 HP43 P210AM HSS03005
DNMX HGM-
A32SPDUNR/L11 a a 1104pp 32 250 50 22 8.4 30 13° 44 0.8 LLSDN32 LLP13 LLCL23 LLCS106 HKY25R PT3/8 ─ ─ ─
DNMM
DNGA 1504pp HGM-
A32SPDUNR/L15 a a 32 250 50 22 8.4 30 13° 44 0.8 LLSDN42 LLP14 LLCL24 LLCS108S HKY30R PT3/8 ─ ─ ─
DNGG HGM-
A40TPDUNR/L15 a a 1504pp 40 300 63 27 9.4 37 10° 54 0.8 LLSDN42 LLP14 LLCL24 LLCS108S HKY30R PT3/8 ─ ─ ─
HGM-
A50UPDUNR/L15 a a 1504pp 50 350 80 35 12.4 47 9° 70 0.8 LLSDN42 LLP14 LLCL24 LLCS108S HKY30R PT3/8 ─ ─ ─
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
439
BORING BARS
Product Information CBN TURNING INSERTS >> 222 PCD TURNING INSERTS >> 266
95° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
IN
DM KAPR
95°
WF
95° GAMF
RE LDRED H
LF DCON
GAMP
6°
Dimensions(mm) *2 *2
Stock
Order Number Insert Number
LDRED
DCON
GAMF
DMIN
WF
RE
R L
LF
HGM-
A16MPCLNR/L09 a a 09T3pp 16 150 25 11 14 15° 20 0.8 ─ ─ LLCL13S LLCS105 HKY20R PT1/8 ─ ─ ─
HKY25R HGM-
A20QPCLNR/L09 a a 09T3pp 20 180 32 13 18 13° 25 0.8 ─ ─ ─ ─ HKY15R PT1/8 HP3T P208AM HSS03005
HGM-
A20QPCLNR/L09N a a 09T3pp 20 180 32 13 18 13° 25 0.8 ─ ─ LLCL13S LLCS105 HKY20R PT1/8 ─ ─ ─
CNMA HGM-
A25RPCLNR/L09 a a
CNMG 09T3pp 25 200 40 17 23 13° 32 0.8 ─ ─ LLCL13S LLCS105 HKY20R PT1/4 ─ ─ ─
A25RPCLNR/L12 a a CNMM 1204pp 25 200 40 17 23 13° 32 0.8 MLCP42 ─ ─ ─ HKY30R HGM- HP43 P210AM HSS03005
HKY15R PT1/4
CNGG
HGM-
A32SPCLNR/L12 a a 1204pp 32 250 50 22 30 13° 44 0.8 LLSCN42 LLP14 LLCL14 LLCS108S HKY30R PT3/8 ─ ─ ─
HGM-
A40TPCLNR/L12 a a 1204pp 40 300 63 27 37 10° 54 0.8 LLSCN42 LLP14 LLCL14 LLCS108S HKY30R PT3/8 ─ ─ ─
HGM-
A50UPCLNR12 a 1204pp 50 350 80 35 47 10° 63 0.8 LLSCP42 LLP14 LLCL14 LLCS108S HKY30R PT3/8 ─ ─ ─
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
440
BORING BARS
Product Information CBN TURNING INSERTS >> 237 SPARE PARTS >> 1927
95° TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
IN
DM KAPR
95°
95°
WF
GAMF LDRED H
RE
GAMP LF DCON
6°
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number LDRED
DCON
GAMF
DMIN
WF
RE
R L Clamp Lever Clamp Screw Wrench Plug
LF
H
HGM-
A16MPWLNR/L06 a a 06T3pp 16 150 25 11 14 15° 20 0.8 LLCL13S LLCS105 HKY20R PT1/8
HGM-
A20QPWLNR/L06 a a WNMG 06T3pp 20 180 32 13 18 13° 25 0.8 LLCL13S LLCS105 HKY20R PT1/8
HGM-
A25RPWLNR/L06 a a 06T3pp 25 200 40 17 23 13° 32 0.8 LLCL13S LLCS105 HKY20R PT1/4
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
441
BORING BARS
Product Information CBN TURNING INSERTS >> 226 PCD TURNING INSERTS >> 267
107° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
30´
KAPR ISO13399 PROPERTY >> 1966
IN KAPR
DM 107.5°
WF
WF2
107.5° GAMF
RE
LDRED
H
LF DCON
GAMP
6°
Dimensions(mm) *2 *2
Stock
LDRED
GAMF
DMIN
WF2
RE
R L Pin Lever Screw Wrench Plug Pin Screw
LF
A25RPDQNR/L15 a a
DNMA 1504pp 25 200 40 17 6.9 23 13° 32 0.8 MLDP42 ─ ─ ─ HKY15R HGM-
HKY30R PT1/4 HP43 P210AM HSS03005
DNMG HGM-
A32SPDQNR/L15 a a 1504pp 32 250 50 22 8.4 30 13° 44 0.8 LLSDN42 LLP14 LLCL24 LLCS108S HKY30R PT3/8 ─ ─ ─
DNMM
HGM-
A40TPDQNR/L15 a a DNGA 1504pp 40 300 63 27 9.4 37 10° 54 0.8 LLSDN42 LLP14 LLCL24 LLCS108S HKY30R PT3/8 ─ ─ ─
A50UPDQNR15 a DNGG 1504pp 50 350 80 35 12.4 47 9° 70 0.8 LLSDN42 HGM-
LLP14 LLCL24 LLCS108S HKY30R PT3/8 ─ ─ ─
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
442
BORING BARS
Product Information CBN TURNING INSERTS >> 226 PCD TURNING INSERTS >> 267
93° SPARE PARTS >> 1927 TECHNICAL INFO >> 1971
KAPR ISO13399 PROPERTY >> 1966
WF
KAPR
93° 93°
WF2
GAMF 25 RE H
DMIN LDRED
LF DCON
BORING BARS
Dimensions(mm) *2 *2
Stock Insert
Order Number
LDRED
DCON
GAMF
DMIN
Number
WF2
WF
RE
R L
LF
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
443
BORING BARS
Product Information CBN TURNING INSERTS >> 237 SPARE PARTS >> 1927
95° TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
IN KAPR
DM 95°
95°
WF
LDRED H
GAMF LF DCON
Stock
Dimensions(mm) *
BORING BARS
GAMF
DMIN
R
WF
Shim Shim Clamp Side Lock Spring Clamp Wrench Plug
RE
LF
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
444
BORING BARS
LF
KAPR
DMIN
90°
DCON
90°
WF
GAMF RE
GAMP
6°
Right hand tool holder only.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF WF GAMF DMIN RE
R Shim Shim Pin Clamp Clamp Wrench
Lever Screw
TNMA
DPTF132R a TNMG 1604pp 32 40 20 12° 40 0.8 LLSTN32 LLP13 LLCL13 LLCS106 HKY25R
TNMM
DPTF140R a TNGA
TNGG
2204pp 40 50 25 10° 50 0.8 LLSTN42 LLP14 LLCL14 LLCS108 HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
445
BORING BARS
LF
KAPR
DMIN
DCON
93°
93°
WF
GAMF RE
GAMP
6°
Right hand tool holder only.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF WF GAMF DMIN RE
R Shim Shim Pin Clamp Clamp Wrench
Lever Screw
DNMA
DPDU132R a DNMG
DNMX
1504pp 32 40 25 10° 50 0.8 LLSDN42 LLP14 LLCL24 LLCS108 HKY30R
DNMM
DPDU140R a DNGA
DNGG
1504pp 40 50 30 9° 60 0.8 LLSDN42 LLP14 LLCL24 LLCS108 HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
446
BORING BARS
LF
KAPR
95°
DMIN
DCON
95°
WF
5°
GAMF RE
GAMP
6°
Right hand tool holder only.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF WF GAMF DMIN RE
R Shim Shim Pin Clamp Clamp Wrench
Lever Screw
CNMA
DPCL132R a
CNMG 1204pp 32 40 20 12° 40 0.8 LLSCN42 LLP14 LLCL14 LLCS108 HKY30R
CNMM
DPCL140R a
CNGG 1204pp 40 50 25 10° 50 0.8 LLSCN42 LLP14 LLCL14 LLCS108 HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
447
BORING BARS
LF
KAPR
107.5°
DMIN
DCON
107.5°
WF
GAMF RE
GAMP
6°
Right hand tool holder only.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF WF GAMF DMIN RE
R Shim Shim Pin Clamp Clamp Wrench
Lever Screw
DNMA
DPDH132R a DNMG 1504pp 32 40 25 10° 50 0.8 LLSDN42 LLP14 LLCL24 LLCS108 HKY30R
DNMM
DPDH140R a DNGA
DNGG
1504pp 40 50 30 9° 60 0.8 LLSDN42 LLP14 LLCL24 LLCS108 HKY30R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
448
BORING BARS
LF
KAPR
117.5°
DMIN
DCON
117.5°
WF
GAMF RE
GAMP
10°
Right hand tool holder only.
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF WF GAMF DMIN RE
R Shim Lock Pin Lock Screw Stop Ring Wrench
DPVP132R a VNMG 1604pp 32 40 25 13° 50 0.8 PV322 P11S HSP05008C E03 HKY25R
VNGA
DPVP140R a VNGG 1604pp 40 50 30 13° 60 0.8 PV322 P11S HSP05008C E03 HKY25R
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
K Gray Cast Iron Tensile Strength Medium 80 (60─100) 0.25 (0.1─0.4) ─5.0 80 (60─100) 0.2 (0.1─0.3) ─4.0
< 350MPa
449
BORING BARS
Dimensions (mm)
Stock
Order Head
Set Bolt Wrench
Number DCON LF H OAL Order Number
450
BORING BARS
AL TYPE BORING
S-STFE BARS
GRADES AND CHIP BREAKERS >> 38 TURNING INSERTS >> 157
Product Information PCD TURNING INSERTS >> 284 SPARE PARTS >> 1927
91° TECHNICAL INFO >> 1971 ISO13399 PROPERTY >> 1966
KAPR
DMIN
KAPR
91°
91°
WF
GAMF LDRED 10 H
RE
3° LF DCON
GAMP
7°
BORING BARS
Stock
Dimensions(mm) *
Order Number Insert Number
DCON LF LDRED WF H DMIN RE
R L Clamp Screw Wrench
S16RSTFER/L16 a a 1603pp 16 200 30 11 14.6 20 0.4 FC400890T TKY10F
S20RSTFER/L16 a a TEGX...R/L 1603pp 20 200 37 13 18 25 0.4 FC400890T TKY10F
S25SSTFER/L16 a a 1603pp 25 250 40 17 23 32 0.4 FC400890T TKY10F
• The insert photos are only examples. The letters refer to the chip breaker and the bracketed dimension are refers to the inscribed circle.
• When using insert with right and left hand chip breaker, please use left hand insert for right hand holder and right hand insert for left hand holder.
451
452
TURNING TOOLS
GROOVING
GY SERIES......................................... 454 SMG HOLDER.............................. 560
GY SERIES ORDER NUMBER............. 460 INTERNAL GROOVING.................... 562
GY INSERTS ...................................... 462 GY SERIES .................................. 562
STANDARD OF GROOVING TOOLS.... 466 MICRO-MINI................................. 579
EXTERNAL GROOVING .................. 468 MICRO-MINI TWIN ....................... 580
GY SERIES .................................. 468 F TYPE BORING BARS ................ 584
UG HOLDER ................................ 554 D TYPE BORING HEAD ................ 586
MG HOLDER................................ 557
453
GROOVING
GY SERIES
3 3
GROOVING
3
Lock Lock
Lock
2 Lock 2 Lock
1 Lock 2 Lock
1
Lock
1 Lock
Convex
contact
face
454
GROOVING
GROOVING
Modular Holder for
Internal Grooving
GU Breaker
(VP20RT) GS Breaker
(VP10RT)
GM Breaker
(MY5015)
(CBN)
MS Breaker
MM Breaker
BM Breaker
Blank Insert
(RT9010)
(RT9020)
455
GROOVING
1010 2020
1212 2525
1616 3225 1616 2020 2525 3225
2012 3232 3232
Same holder
Internal holders
a A wide range of holders available a Short shank types are standard
from minimum diameter of ø25mm. stocked.
Mono block type Modular type Mono block type Modular type
Min.cutting diameter Min.cutting diameter
&25, &32 &40, &50,
&60, &70
456
GROOVING
Convex
contact
face
GROOVING
Comparison of finished surface Rigidity comparison
GY series can achieve stable machining at the cutting conditions The GY series provides rigidity comparable to a mono block
which created vibration with a conventional modular type tool. type grooving tool.
0.20
<Cutting Conditions>
Workpiece : SCM440 Conventional modular type
Insert width : 5mm 0.15
Deflection (mm)
Competitor's
0.05 mono block type
3 3
3
Lock Lock
Lock
2 Lock 2 Lock
1 Lock 2 Lock
1
1
Lock
Lock
457
GROOVING
INSERT
Cutting Off
●MF Breaker
Efficient chip breaking
when cross-feed
machining.
a INSERT GRADE
Work Material
Machining P
Steel
M
Stainless Steel
K
Cast Iron
S
Heat resistant Alloy / Titanium Alloy
H
Hardened steel
Condition
Stable
BC8110
NX2525
MY5015 VP10RT
MY5015
Machining VP10RT
Condition
VP10RT
RT9010 MB8025
VP10RT
VP20RT VP20RT VP20RT
VP20RT
Unstable
Note1) VP20RT is the first recommended grade for materials other than hardened steel.
Note2) For VP10RT, VP20RT and MY5015, wet cutting is recommended.
458
GROOVING
NX2525
MIRACLE Coating
a NX2525, a cermet grade for finish machining of steels and for good
Tough cemented carbide substrate surface finishes at lower cutting speeds.
(HRA90.5)
GROOVING
MB8025
MIRACLE Coating a MB8025 is a sintered CBN grade for hardened steel.
Tough cemented carbide substrate
(HRA92.0)
MY5015
a MY5015 is a CVD coated grade with
excellent wear resistance even at high
temperatures. It provides longer tool life
when machining cast and ductile cast irons.
Also suitable for high speed continuous
cutting of steels.
a BLANK INSERTS
●Blank inserts for custom grinding
RT9010/RT9020 for insert blank
a First recommendation on insert blank is RT9020 due to the tougher
carbide substrate and suitable for a wide range of application.
RT9010 is a harder substrate than RT9020 and is ideal for long tool
life on stable cutting applications.
Coating is recommended for application on steel, stainless steel
and cast iron materials.
459
GROOVING
GY 2 M 0300 F 030 N 05 M F
zSeries Description cPeripheral bSeat Size *1 nCorner Radius .Application 1 /Application 2
G Ground C 1.50mm 010 0.10mm G Grooving/Cutting off U For Gummy Steel
xNumber of Teeth M Sintered D 2.00mm 015 0.15mm M Multifunctional F Finishing
2.24mm
1 1 Edge Type B B Copying (Ball shape) S Low feeds
···
···
Blank 2.39mm
2 2 Edge Type E 2.50mm
2.74mm 400 4.00mm M Medium feeds
3.00mm
vGroove Width F 3.18mm ,Lead angle (R/L type insert)
3.24mm
0150 1.50mm 4.00mm 05 5º
G 4.24mm
0200 2.00mm 4.75mm
H 5.00mm mHand
···
···
5.24mm N Neutral
0800 8.00mm 6.00mm
J 6.31mm R Right
6.35mm
L Left
K 8.00mm
y CBN INSERT
GROOVING
z x c v b n m . u
11 u
12
GY 1 G 0300 F 020 N G F GS
11 Application 3
u Honing Type
F Flat Top GS General Purpose
*1 Select a seat size with the same symbol as that of modular blade and mono block holder.
y MODULAR BLADE
a EXTERNAL/INTERNAL/FOR RECESSING
z x c v b n
GY M25 R A F 12 *3
zSeries Description xModular Blade Size cHand vModular Blade Type bSeat Size 1 * nMax. Groove Depth 2 *
M20 R Right A Standard Type D 2.00mm 005 0.5mm
2.24mm
M25 L Left B Reinforced Type 2.39mm 06 6mm
E 2.50mm
C For recessing
···
···
2.74mm
D Face Grooving 3.00mm 25 25mm
F 3.18mm
3.24mm
G 4.00mm
4.24mm
4.75mm
H 5.00mm
5.24mm
6.00mm
J 6.31mm
6.35mm
a FACE GROOVING
z x c v b n m
GY M25 R D F 12 050
mMin. Groove Diameter
035 35mm
040 40mm
···
···
250 250mm
*12 The
Select a seat size with the same symbol as that of the insert.
*3 GYM20R/LA-o10,
maximum groove depth is a value when used for external grooving and changes according to the insert used.
* and internal grooving.GYM20R/LA-o12, GYM25R/LA-o12 and GYM25R/LA-o14 can be used for both external
460
GROOVING
GY P R 2525 M 00 K 25
zSeries Description cHand of Holder vShank Diameter(H x W) bHolder Length mSeat Size *1 ,Max. Groove Depth
R Right 1010 10mmx10mm J 110mm C 1.50mm 06 6mm
L Left 1212 12mmx12mm JX 120mm D 2.00mm 08 8mm
2.24mm
1616 16mmx16mm K 125mm
···
···
2.39mm
E 2.50mm
xHolder Type 2012 20mmx12mm M 150mm 2.74mm 25 25mm
S Mono block type for Swiss style lathes 2020 20mmx20mm P 170mm 3.00mm
F 3.18mm
P With mono block offset 2525 25mmx25mm 3.24mm
G 4.00mm
Q Without mono block offset 3225 32mmx25mm nAngle 4.24mm
H Modular holder 3232 32mmx32mm 00 0° 4.75mm
H 5.00mm
50 50° 5.24mm
6.00mm
90 90° J 6.31mm
6.35mm
K 8.00mm
GROOVING
a MODULAR HOLDER
z x c v b n . /
GY H R 2525 M 00 M25 R
.Modular Blade Size /Hand of Modular Blade
M20 R Right
M25 L Left
*1 Select a seat size with the same symbol as that of the insert.
y INTERNAL
a MONO BLOCK HOLDER
z x c v b n m , .
GY A R 20 K 90 A F 06
zSeries Description cHand of Holder vShank Diameter bHolder Length nAngle .Max. Groove Depth
R Right 20 20mm K 125mm 90 90° 06 6mm
L Left 25 25mm L 140mm 07 7mm
32 32mm M 150mm
xHolder Type
40 40mm P 170mm
mNeck Length ,Seat Size 1*
A 30mm D 2.00mm
50 50mm Q 180mm 2.24mm
A Mono Block
B 40mm 2.39mm
D R 200mm
Modular holder E 2.50mm
C 50mm 2.74mm
S 250mm
D 60mm 3.00mm
T 300mm F 3.18mm
F 80mm 3.24mm
G 4.00mm
4.24mm
4.75mm
H 5.00mm
5.24mm
6.00mm
J 6.31mm
6.24mm
a MODULAR HOLDER
z x c v b n m / u
11
GY D R 40 M 90 D M25 L
10 Modular Blade Size
u 11 Hand of Modular Blade
u
M20 R Right
M25 L Left
*1 Select a seat size with the same symbol as that of the insert.
461
GROOVING
GY INSERTS
INSERTS
Stock Dimensions (mm)
Applications
VP10RT
VP20RT
MB8025
MY5015
NX2525
RT9010
RT9020
Size Grooving RER/L CDX L
Tolerance
Width
a a a
7°
L
*2 The dimension depends on the breaker. Refer to the “L dimension tolerance conversion table”.
a : Inventory maintained in Japan. (10 inserts in one case) (CBN inserts are available in 1 piece in one case.)
462
GROOVING
VP10RT
VP20RT
MB8025
MY5015
NX2525
BC8110
RT9010
RT9020
Size Grooving RER/L CDX L LE
Tolerance
Width
PSIRR 5°
GY2M0250E020L05-GM a a E 2.50 ±0.03 0.2 19.5 20.825 ─
RER
GY2M0300F030R05-GM a a F 3.00 ±0.03 0.3 19.5 20.85 ─
CDX GY2M0300F030L05-GM a a F 3.00 ±0.03 0.3 19.5 20.85 ─
GY2M0400G030R05-GM a a G 4.00 ±0.04 0.3 24.5 25.85 ─
GY2M0400G030L05-GM a a G 4.00 ±0.04 0.3 24.5 25.85 ─
L
GY2M0500H040R05-GM a a H 5.00 ±0.04 0.4 24.5 25.95 ─
Right hand insert shown. GY2M0500H040L05-GM a a H 5.00 ±0.04 0.4 24.5 25.95 ─
Flat Top (For hardened steel) GY1G0200D020N-GFGS a a D 2.00 ±0.03 0.2 ─ 20.70 2.7
LE GY1G0239E020N-GFGS a a E 2.39 ±0.03 0.2 ─ 20.70 2.7
GROOVING
REL GY1G0250E020N-GFGS a a E 2.50 ±0.03 0.2 ─ 20.70 2.7
For Grooving
a a
* 1GY2G0274E020N-MF
GY2G0300F020N-MF
a a
a a
a
a
a
a
E
F
2.74 ±0.02 0.2 19.7 21.05 ─
3.00 ±0.02 0.2 19.5 21.05 ─
GY2G0300F040N-MF a a a a F 3.00 ±0.02 0.4 19.3 21.05 ─
GY2G0318F020N-MF a a a a F 3.18 ±0.02 0.2 19.5 21.05 ─
GY2G0318F040N-MF a a a a F 3.18 ±0.02 0.4 19.3 21.05 ─
a a a a
RER * 1GY2G0424G020N-MF
GY2G0475H020N-MF
a a
a a
a
a
a
a
G
H
4.24 ±0.02 0.2 24.9 25.95 ─
4.75 ±0.02 0.2 24.4 25.95 ─
CDX
GY2G0475H040N-MF a a a a H 4.75 ±0.02 0.4 24.2 25.95 ─
L GY2G0475H080N-MF a a a a H 4.75 ±0.02 0.8 23.8 25.95 ─
GY2G0500H020N-MF a a a a H 5.00 ±0.02 0.2 24.4 25.95 ─
GY2G0500H040N-MF a a a a H 5.00 ±0.02 0.4 24.2 25.95 ─
GY2G0500H080N-MF a a a a H 5.00 ±0.02 0.8 23.8 25.95 ─
* 1GY2G0524H020N-MF
GY2G0600J020N-MF
a a
a a
a
a
a
a
H
J
5.24 ±0.02 0.2 24.4 25.95 ─
6.00 ±0.02 0.2 24.4 25.95 ─
GY2G0600J040N-MF a a a a J 6.00 ±0.02 0.4 24.2 25.95 ─
GY2G0600J080N-MF a a a a J 6.00 ±0.02 0.8 23.8 25.95 ─
* 1GY2G0631J020N-MF
GY2G0635J020N-MF
a a
a a
a
a
a
a
J
J
6.31 ±0.02 0.2 24.4 25.95 ─
6.35 ±0.02 0.2 24.4 25.95 ─
GY2G0635J040N-MF a a a a J 6.35 ±0.02 0.4 24.2 25.95 ─
GY2G0635J080N-MF a a a a J 6.35 ±0.02 0.8 23.8 25.95 ─
463
GROOVING
INSERTS
Stock Dimensions (mm)
Applications
VP10RT
VP20RT
MB8025
MY5015
NX2525
RT9010
RT9020
Size Grooving CDX L
Tolerance RER/L
Width
L
GY2M0600J080N-MS a a a a J 6.00 ±0.04 0.8 23.5 25.65
GY2M0800K080N-MS a a a K 8.00 ±0.04 0.8 28.5 30.50
MM Breaker GY2M0200D020N-MM a a a a D 2.00 ±0.03 0.2 19.1 20.70
GROOVING
a a a a
a a a
L a a a
a a a
*12 The
Insert blank is not suitable for machining without grinding.
* dimension depends on the breaker. Refer to the “L dimension tolerance conversion table”.
464
GROOVING
GROOVING
*12 This value is used at the described holder dimension.
*3 The
y when there is no applicable breaker.
* standard dimensions shown here use an approximate insert width.
465
GROOVING
CLASSIFICATION
EXTERNAL CUTTING
Groove Width According to Cutting Mode (mm)
Shallow Grooving
Deep Grooving
Face Grooving
Cutting Off
Recessing
Copying
Name of Tool Holder Insert Shape Features
^ 554
Clamp-on type.
MG Holder a
a Precision class insert.
1.25
a Positive insert suffers from
─
negligible chattering and thus
produces a good finished surface. 6
^ 557
Screw-on type.
SMG Holder a
a Precision class insert.
0.5
a Positive insert suffers from
─
negligible chattering and thus
produces a good finished surface. 1.3
^ 560
For gang type tool posts.
GTAH a
a Small Shank : 8mm─16mm
GTBH GTCH a Possible to control the back clamping. 0.3
a High rigidity due to design of
─
466
GROOVING
CLASSIFICATION
EXTERNAL CUTTING
Groove Width According to Cutting Mode (mm)
Shallow Grooving
Deep Grooving
Face Grooving
Cutting Off
Name of Tool Holder Insert Shape Features
Copying
For cam type tool posts.
SMALL TOOLS
CSVH
a
a Small Shank : 7─12mm
a Single holder responds to front turning, 0.25 0.6
back turning, grooving, threading and
cutting off operations.
─
a The most suitable for machining of small 1.5 1.5
parts with work diameter 5mm or smaller.
a Maximum groove depth : 0.3─2.5mm
^ 374 a Maximum cut off diameter : 3─5mm
INTERNAL CUTTING
Min. Cutting Groove Width Max. Groove
Name of Tool Holder Insert Shape Features Diameter D
epth
GROOVING
a Modular blade type
GY Series a Clamp-on type.
2 4
a The modular blade allows for high
rigidity and accuracy. 25
─
(Tri Lock System)
a Various insert types. 6.35 13
a Mono block type
^ 562 a Spring clamp type.
a Screw-on type.
FSL5 a Precision class insert.
1.2 1.0
a Holder is capable of performing
10
─
both grooving and threading.
a Maximum groove depth : 3mm. 4.0 3.0
^ 584
Pin lock type.
DPT4
a
a Precision class insert.
1.25 1.2
a Exchangable head type.
40
─
─
4.5 4.5
^ 586
─
2.0 2.0
^ 580
3.0 2.0
^ 579
467
GROOVING
CW
1M
Insert GY 2Mooooooooo -GM Insert GY2Gooooooooo-MF
B
Insert GY2M ooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1G ooooooooo GF
- Insert GY2Mooooooooo-MM LF
GS
LH
LH
Fig. A
IA
Fig. B TDIA
TD CU
CU
HF
HF
H
H
HBH
LH 2 LH 2
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM Fig. C LH
Insert GY2Mooooooooo-GU DIA
1M C UT
Insert GY2MoooooR/Loo-GM
HF
H
GROOVING
LH 2
Seat
CW CDX
*4 CUTDIA Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock H B LF LH
R GYSR1010JX00-C11 a A 10 10 120 22
11 22 Mono Block
L GYSL1010JX00-C11 a A 10 10 120 22
R GYSR1212JX00-C13 a B 12 12 120 22
13 26 Mono Block
L GYSL1212JX00-C13 a B 12 12 120 22
C 1.50
R GYSR1616JX00-C17 a B 16 16 120 27
*
17 1
*
34 2 Mono Block
L GYSL1616JX00-C17 a B 16 16 120 27
R GYSR2012JX00-C18 a C 20 12 120 28
*
18 1
*
36 2 Mono Block
L GYSL2012JX00-C18 a C 20 12 120 28
R GYSR1010JX00-D11 a A 10 10 120 22
11 22 Mono Block
L GYSL1010JX00-D11 a A 10 10 120 22
R GYSR1212JX00-D13 a B 12 12 120 22
2.00 13 26 Mono Block
L GYSL1212JX00-D13 a B 12 12 120 22
D
2.24 R GYSR1616JX00-D17 a B 16 16 120 27
17 34 Mono Block
L GYSL1616JX00-D17 a B 16 16 120 27
R GYSR2012JX00-D18 a C 20 12 120 28
18 36 Mono Block
L GYSL2012JX00-D18 a C 20 12 120 28
R GYSR1010JX00-E11 a A 10 10 120 22
11 22 Mono Block
L GYSL1010JX00-E11 a A 10 10 120 22
2.39 R GYSR1212JX00-E13 a B 12 12 120 22
13 26 Mono Block
L GYSL1212JX00-E13 a B 12 12 120 22
E 2.50
R GYSR1616JX00-E17 a B 16 16 120 27
2.74 17 34 Mono Block
L GYSL1616JX00-E17 a B 16 16 120 27
R GYSR2012JX00-E18 a C 20 12 120 28
18 36 Mono Block
L GYSL2012JX00-E18 a C 20 12 120 28
R GYSR1010JX00-F11 a A 10 10 120 22
11 22 Mono Block
L GYSL1010JX00-F11 a A 10 10 120 22
3.00 R GYSR1212JX00-F13 a B 12 12 120 22
13 26 Mono Block
L GYSL1212JX00-F13 a B 12 12 120 22
F 3.18
R GYSR1616JX00-F17 a B 16 16 120 27
3.24 17 34 Mono Block
L GYSL1616JX00-F17 a B 16 16 120 27
R GYSR2012JX00-F18 a C 20 12 120 28
18 36 Mono Block
L GYSL2012JX00-F18 a C 20 12 120 28
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH and LH 2 values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*4 The maximum groove depth is limited by the workpiece diameter.
*
468
GROOVING
SPARE PARTS
Holder
Clamp Screw Wrench
GYSR/L1010JX00-o11
CS350990T
GYSR/L1212JX00-o13 (Clamp Torque TKY10R
: 2.5N·m)
GYSR/L2012JX00-o18
TS4SBL
GROOVING
GYSR/L1616JX00-o17 (Clamp Torque TKY15R
: 3.5N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
469
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
IA
TD
TD
CU
CU
HF
HF
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
1M
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, LH 2 and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*4 The maximum groove depth is limited by the workpiece diameter.
*
470
GROOVING
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
IA
TD
TD
CU
CU
HSC05030
HF
HF
H
GYQR/Looooooo-ooo (Clamp Torque
H
─ HKY40R
LH 2 LH 2 : 7.0N·m)
HBH
HBH
LH
Fig. G TS407
TDIA GYHR/Looooooo-M20R/L (Clamp Torque
zTKY30R
CU xTKY15D
GY06013M : 3.5N·m)
HF
(Clamp Torque
H
: 6.0N·m) TS55
GROOVING
zTKY30R
GYHR/Looooooo-M25R/L (Clamp Torque
xTKY25D
Right hand tool holder shown. : 5.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
471
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
DI
TD
T
CU
CU
HF
HF
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
1M
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
IA
TD
TD
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
2.00
D
2.24
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, LH 2 and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*4 The maximum groove depth is limited by the workpiece diameter.
*
472
GROOVING
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
IA
TD
TD
CU
CU
HSC05030
HF
HF
H
GYQR/Looooooo-ooo (Clamp Torque
H
─ HKY40R
LH 2 LH 2 : 7.0N·m)
HBH
HBH
LH
Fig. G TS407
TDIA GYHR/Looooooo-M20R/L (Clamp Torque
zTKY30R
CU xTKY15D
GY06013M : 3.5N·m)
HF
(Clamp Torque
H
: 6.0N·m) TS55
GROOVING
zTKY30R
GYHR/Looooooo-M25R/L (Clamp Torque
xTKY25D
Right hand tool holder shown. : 5.0N·m)
473
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
A
DI
TD
T
CU
CU
HF
HF
H
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
1M
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
474
GROOVING
z
WF
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
A
DI
TD
HSC05030
CU
CU
HF
HF
H
GYQR/Looooooo-ooo (Clamp Torque
H
─ HKY40R
LH 2 LH 2 : 7.0N·m)
HBH
HBH
TS407
zTKY30R
GYHR/Looooooo-M20R/L (Clamp Torque
xTKY15D
GY06013M : 3.5N·m)
(Clamp Torque
: 6.0N·m) TS55
GROOVING
zTKY30R
GYHR/Looooooo-M25R/L (Clamp Torque
xTKY25D
Right hand tool holder shown. : 5.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
475
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
A
DI
TD
T
CU
CU
HF
HF
H
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
1M
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, LH 2 and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*4 The maximum groove depth is limited by the workpiece diameter.
*
476
GROOVING
z
WF
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
IA
TD
TD
HSC05030
CU
CU
HF
HF
H
GYQR/Looooooo-ooo (Clamp Torque
H
─ HKY40R
LH 2 LH 2 : 7.0N·m)
HBH
HBH
LH
Fig. G TS407
TDIA GYHR/Looooooo-M20R/L (Clamp Torque
zTKY30R
CU xTKY15D
GY06013M : 3.5N·m)
HF
(Clamp Torque
H
: 6.0N·m) TS55
GROOVING
zTKY30R
GYHR/Looooooo-M25R/L (Clamp Torque
xTKY25D
Right hand tool holder shown. : 5.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
477
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
A
DI
TD
T
CU
CU
HF
HF
H
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
1M
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
3.00
F 3.18
3.24
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, LH 2 and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*4 The maximum groove depth is limited by the workpiece diameter.
*
478
GROOVING
z
WF
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
IA
TD
TD
HSC05030
CU
CU
HF
HF
H
GYQR/Looooooo-ooo (Clamp Torque
H
─ HKY40R
LH 2 LH 2 : 7.0N·m)
HBH
HBH
LH
Fig. G TS407
TDIA GYHR/Looooooo-M20R/L (Clamp Torque
zTKY30R
CU xTKY15D
GY06013M : 3.5N·m)
HF
(Clamp Torque
H
: 6.0N·m) TS55
GROOVING
zTKY30R
GYHR/Looooooo-M25R/L (Clamp Torque
xTKY25D
Right hand tool holder shown. : 5.0N·m)
479
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
A
DI
TD
T
CU
CU
HF
HF
H
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
R GYQR2020K00-G08 a ─ ─ G 20 20 125 41
Mono Block
L GYQL2020K00-G08 a ─ ─ G 20 20 125 41
R GYHR2020K00-M25R a GYM25RA-G08 a C 20 20 119 33
Modular
L GYHL2020K00-M25L a GYM25LA-G08 a C 20 20 119 33
R GYQR2525M00-G08 a ─ ─ G 25 25 150 41
Mono Block
L GYQL2525M00-G08 a ─ ─ G 25 25 150 41
8 16
R GYHR2525M00-M25R a GYM25RA-G08 a A 25 25 144 33
Modular
L GYHL2525M00-M25L a GYM25LA-G08 a A 25 25 144 33
R GYHR3225P00-M25R a GYM25RA-G08 a E 32 25 164 33
Modular
L GYHL3225P00-M25L a GYM25LA-G08 a E 32 25 164 33
R GYHR3232P00-M25R a GYM25RA-G08 a E 32 32 164 33
Modular
L GYHL3232P00-M25L a GYM25LA-G08 a E 32 32 164 33
R GYHR1616J00-M20R a GYM20RA-G12 a C 16 16 110 34
Modular
L GYHL1616J00-M20L a GYM20LA-G12 a C 16 16 110 34
12 24
R GYHR2020K00-M20R a GYM20RA-G12 a A 20 20 125 34
Modular
L GYHL2020K00-M20L a GYM20LA-G12 a A 20 20 125 34
R GYHR2020K00-M25R a GYM25RA-G14 a C 20 20 125 39
4.00 Modular
L GYHL2020K00-M25L a GYM25LA-G14 a C 20 20 125 39
G
4.24 R GYHR2525M00-M25R a GYM25RA-G14 a A 25 25 150 39
Modular
L GYHL2525M00-M25L a GYM25LA-G14 a A 25 25 150 39
14 28
R GYHR3225P00-M25R a GYM25RA-G14 a E 32 25 170 39
Modular
L GYHL3225P00-M25L a GYM25LA-G14 a E 32 25 170 39
R GYHR3232P00-M25R a GYM25RA-G14 a E 32 32 170 39
Modular
L GYHL3232P00-M25L a GYM25LA-G14 a E 32 32 170 39
R GYQR2020K00-G25 a ─ ─ H 20 20 125 46
Mono Block
L GYQL2020K00-G25 a ─ ─ H 20 20 125 46
R GYHR2020K00-M25R a GYM25RA-G25 a D 20 20 136 50
Modular
L GYHL2020K00-M25L a GYM25LA-G25 a D 20 20 136 50
R GYQR2525M00-G25 a ─ ─ G 25 25 150 46
Mono Block
L GYQL2525M00-G25 a ─ ─ G 25 25 150 46
25 1
* 50 2
* Modular
R GYHR2525M00-M25R a GYM25RA-G25 a B 25 25 161 50
L GYHL2525M00-M25L a GYM25LA-G25 a B 25 25 161 50
R GYHR3225P00-M25R a GYM25RA-G25 a F 32 25 181 50
Modular
L GYHL3225P00-M25L a GYM25LA-G25 a F 32 25 181 50
R GYHR3232P00-M25R a GYM25RA-G25 a F 32 32 181 50
Modular
L GYHL3232P00-M25L a GYM25LA-G25 a F 32 32 181 50
480
GROOVING
z
WF
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
IA
TD
TD
HSC05030
CU
CU
HF
HF
H
H
HBH
LH LH
Fig. G Fig. H TS407
TDIA TD
IA
GYHR/Looooooo-M20R/L (Clamp Torque
zTKY30R
CU CU xTKY15D
GY06013M : 3.5N·m)
HF
HF
(Clamp Torque
H
H
: 6.0N·m) TS55
GROOVING
zTKY30R
HBH
Fig.
Dimensions (mm) *3 Cutting Mode
481
GROOVING
1
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS CDX
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
A
DI
TD
T
CU
CU
HF
HF
H
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
Insert GY2MoooooR/Loo-GM
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
R GYQR2020K00-H08 a ─ ─ G 20 20 125 41
Mono Block
L GYQL2020K00-H08 a ─ ─ G 20 20 125 41
R GYHR2020K00-M25R a GYM25RA-H08 a C 20 20 119 33
Modular
L GYHL2020K00-M25L a GYM25LA-H08 a C 20 20 119 33
R GYQR2525M00-H08 a ─ ─ G 25 25 150 41
Mono Block
L GYQL2525M00-H08 a ─ ─ G 25 25 150 41
8 16
R GYHR2525M00-M25R a GYM25RA-H08 a A 25 25 144 33
Modular
L GYHL2525M00-M25L a GYM25LA-H08 a A 25 25 144 33
R GYHR3225P00-M25R a GYM25RA-H08 a E 32 25 164 33
Modular
L GYHL3225P00-M25L a GYM25LA-H08 a E 32 25 164 33
R GYHR3232P00-M25R a GYM25RA-H08 a E 32 32 164 33
Modular
L GYHL3232P00-M25L a GYM25LA-H08 a E 32 32 164 33
R GYHR1616J00-M20R a GYM20RA-H12 a C 16 16 110 34
Modular
L GYHL1616J00-M20L a GYM20LA-H12 a C 16 16 110 34
12 24
R GYHR2020K00-M20R a GYM20RA-H12 a A 20 20 125 34
Modular
L GYHL2020K00-M20L a GYM20LA-H12 a A 20 20 125 34
4.75 R GYHR2020K00-M25R a GYM25RA-H14 a C 20 20 125 39
Modular
L GYHL2020K00-M25L a GYM25LA-H14 a C 20 20 125 39
H 5.00
R GYHR2525M00-M25R a GYM25RA-H14 a A 25 25 150 39
5.24 Modular
L GYHL2525M00-M25L a GYM25LA-H14 a A 25 25 150 39
14 28
R GYHR3225P00-M25R a GYM25RA-H14 a E 32 25 170 39
Modular
L GYHL3225P00-M25L a GYM25LA-H14 a E 32 25 170 39
R GYHR3232P00-M25R a GYM25RA-H14 a E 32 32 170 39
Modular
L GYHL3232P00-M25L a GYM25LA-H14 a E 32 32 170 39
R GYQR2020K00-H25 a ─ ─ H 20 20 125 46
Mono Block
L GYQL2020K00-H25 a ─ ─ H 20 20 125 46
R GYHR2020K00-M25R a GYM25RA-H25 a D 20 20 136 50
Modular
L GYHL2020K00-M25L a GYM25LA-H25 a D 20 20 136 50
R GYQR2525M00-H25 a ─ ─ G 25 25 150 46
Mono Block
L GYQL2525M00-H25 a ─ ─ G 25 25 150 46
25 1
* 50 2
* Modular
R GYHR2525M00-M25R a GYM25RA-H25 a B 25 25 161 50
L GYHL2525M00-M25L a GYM25LA-H25 a B 25 25 161 50
R GYHR3225P00-M25R a GYM25RA-H25 a F 32 25 181 50
Modular
L GYHL3225P00-M25L a GYM25LA-H25 a F 32 25 181 50
R GYHR3232P00-M25R a GYM25RA-H25 a F 32 32 181 50
Modular
L GYHL3232P00-M25L a GYM25LA-H25 a F 32 32 181 50
482
GROOVING
z
WF
LF B Holder x
5 pcs.
LH LH
Fig. C Fig. D Clamp Screw Blade Screw Wrench *
IA
IA
TD
TD
HSC05030
CU
CU
HF
HF
H
H
HBH
LH LH
Fig. G Fig. H TS407
TDIA TD
IA
GYHR/Looooooo-M20R/L (Clamp Torque
zTKY30R
CU CU xTKY15D
GY06013M : 3.5N·m)
HF
HF
(Clamp Torque
H
H
: 6.0N·m) TS55
GROOVING
zTKY30R
HBH
Fig.
Dimensions (mm) *3 Cutting Mode
483
GROOVING
CW
WF
B
LF
LH LH
Fig. A Fig. B
IA
A
DI
TD
T
CU
CU
HF
HF
H
H
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM
LH 2 LH 2
Insert GY2Mooooooooo-GU LH LH
Fig. E Fig. F
IA
DI
TD
T
CU
CU
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
R GYQR2020K00-J08 a ─ ─ G 20 20 125 41
Mono Block
L GYQL2020K00-J08 a ─ ─ G 20 20 125 41
R GYHR2020K00-M25R a GYM25RA-J08 a C 20 20 119 33
Modular
L GYHL2020K00-M25L a GYM25LA-J08 a C 20 20 119 33
R GYQR2525M00-J08 a ─ ─ G 25 25 150 41
Mono Block
L GYQL2525M00-J08 a ─ ─ G 25 25 150 41
8 16
R GYHR2525M00-M25R a GYM25RA-J08 a A 25 25 144 33
Modular
L GYHL2525M00-M25L a GYM25LA-J08 a A 25 25 144 33
R GYHR3225P00-M25R a GYM25RA-J08 a E 32 25 164 33
Modular
L GYHL3225P00-M25L a GYM25LA-J08 a E 32 25 164 33
R GYHR3232P00-M25R a GYM25RA-J08 a E 32 32 164 33
Modular
L GYHL3232P00-M25L a GYM25LA-J08 a E 32 32 164 33
R GYHR2020K00-M25R a GYM25RA-J14 a C 20 20 125 39
Modular
L GYHL2020K00-M25L a GYM25LA-J14 a C 20 20 125 39
6.00 R GYHR2525M00-M25R a GYM25RA-J14 a A 25 25 150 39
Modular
L GYHL2525M00-M25L a GYM25LA-J14 a A 25 25 150 39
J 6.31 14 28
R GYHR3225P00-M25R a GYM25RA-J14 a E 32 25 170 39
6.35 Modular
L GYHL3225P00-M25L a GYM25LA-J14 a E 32 25 170 39
R GYHR3232P00-M25R a GYM25RA-J14 a E 32 32 170 39
Modular
L GYHL3232P00-M25L a GYM25LA-J14 a E 32 32 170 39
R GYQR2020K00-J25 a ─ ─ H 20 20 125 46
Mono Block
L GYQL2020K00-J25 a ─ ─ H 20 20 125 46
R GYHR2020K00-M25R a GYM25RA-J25 a D 20 20 136 50
Modular
L GYHL2020K00-M25L a GYM25LA-J25 a D 20 20 136 50
R GYQR2525M00-J25 a ─ ─ G 25 25 150 46
Mono Block
L GYQL2525M00-J25 a ─ ─ G 25 25 150 46
25 1
* 50 2
* Modular
R GYHR2525M00-M25R a GYM25RA-J25 a B 25 25 161 50
L GYHL2525M00-M25L a GYM25LA-J25 a B 25 25 161 50
R GYHR3225P00-M25R a GYM25RA-J25 a F 32 25 181 50
Modular
L GYHL3225P00-M25L a GYM25LA-J25 a F 32 25 181 50
R GYHR3232P00-M25R a GYM25RA-J25 a F 32 32 181 50
Modular
L GYHL3232P00-M25L a GYM25LA-J25 a F 32 32 181 50
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, LH 2 and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*
484
GROOVING
CDX
CW
B
LH
LF
LH
SPARE PARTS
Fig. C Fig. D z
IA
IA
TD
TD
CU
CU
Holder x
HF
HF
5 pcs.
H
H
HBH
LH LH HSC05030
Fig. G Fig. H
IA IA
TD TD GYQR/Looooooo-ooo (Clamp Torque ─ HKY40R
CU CU
: 7.0N·m)
HF
HF
H
H
GY06013M TS55
GROOVING
zTKY30R
GYHR/Looooooo-M25R/L (Clamp Torque (Clamp Torque xTKY25D
HBH
Fig.
Dimensions (mm) *3 Cutting Mode
A-J08 a C 20 20 119 33 54 20 26 5
─ G 25 25 150 41 ─ 25 25.35 ─ For grooving/cutting off breaker
─ G 25 25 150 41 ─ 25 25.35 ─ Breaker GU GS GM 05-GM GFGS
Seat (For gummy steel) (Low) (Medium) (Cutting off) (Hardened steel)
RA-J08 a A 25 25 144 33 51 25 28 ─ Size
CW
A-J08 a A 25 25 144 33 51 25 28 ─ Neutral Neutral Neutral With hand Neutral
RA-J08 a E 32 25 164 33 51 32 28 ─ 6.00mm a a a a
J
A-J08 a E 32 25 164 33 51 32 28 ─ 6.35mm a a a
RA-J08 a E 32 32 164 33 51 32 35 ─
A-J08 a E 32 32 164 33 51 32 35 ─ For multifunctional grooving breaker
RA-J14 a C 20 20 125 39 60 20 26 5 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying, Recessing)
A-J14 a C 20 20 125 39 60 20 26 5 Size
CW
RA-J14 a A 25 25 150 39 57 25 28 ─ Ball shape
A-J14 a A 25 25 150 39 57 25 28 ─ 6.00mm a
485
GROOVING
CW
WF
B
LF
LH LH
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS Fig. I Fig. J
DIA DIA
Insert GY2Mooooooooo-GM CUT C UT
HF
HF
H
H
LH 2 LH 2
HBH
GROOVING
R GYPR2525M00-K25 a ─ ─ I 25 25 150 47
Mono Block
L GYPL2525M00-K25 a ─ ─ I 25 25 150 47
R GYPR3225P00-K25 a ─ ─ J 32 25 170 47
*
25 1
*
50 2 Mono Block
L GYPL3225P00-K25 a ─ ─ J 32 25 170 47
R GYPR3232P00-K25 a ─ ─ K 32 32 170 47
Mono Block
L GYPL3232P00-K25 a ─ ─ K 32 32 170 47
K 8.00
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, LH 2 and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*
486
GROOVING
CDX
CW
WF
B
LF
LH SPARE PARTS
Fig. K IA
TD
CU
Holder
HF
LH 2
Clamp Screw Wrench
GY06013M
GROOVING
GYPR/Looooo00-K25 (Clamp Torque TKY30R
Right hand tool holder shown. : 6.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
487
GROOVING
EXTERNAL
GY CW(Cutting width) 2.00–2.74
GROOVING(90°
type holder)
Recommended Cutting Condition >> 496 IDENTIFICATION >> 460
Product Information INSERTS >> 462 SPARE PARTS >> 1927
Technical Info >> 1971 ISO13399 Property >> 1966
2
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM Fig. A Fig. B LF
Insert GY2Mooooooooo-GU CU CU
TD TD
1M
Insert GY2MoooooR/Loo-GM IA IA
HF
HF
H
GROOVING
488
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque
xTKY25D
GYHL2525M90-M25R : 5.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
A-D06 a A 20 20 125 35 20 39 Seat
R Size Geometry name
A-D06 a A 20 20 125 35 20 39
A-D06 a A 25 25 150 38 25 45 D GYoo0200/0224Doooo−Breaker shown below
A-D06 a A 25 25 150 38 25 45 E GYoo0239/0250/0274Eoooo−Breaker shown below
A-D10 a A 20 20 125 35 20 45
A-D10 a A 20 20 125 35 20 45 For grooving/cutting off breaker
A-D12 a A 25 25 150 38 25 53 Breaker GU GS GM 05-GM GFGS
Seat (For gummy steel) (Low) (Medium) (Cutting off) (Hardened steel)
A-D12 a A 25 25 150 38 25 53 Size
CW
B-D18 a B 20 20 125 35 20 51 Neutral Neutral Neutral With hand Neutral
B-D18 a B 20 20 125 35 20 51 D 2.00mm a a a a a
A-D20 a B 25 25 150 38 25 59 E
2.39mm a a a a
A-D20 a B 25 25 150 38 25 59 2.50mm a a a a a
A-E06 a A 20 20 125 35 20 39
L
A-E06 a A 20 20 125 35 20 39 For multifunctional grooving breaker
A-E06 a A 25 25 150 38 25 45 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying, Recessing)
A-E06 a A 25 25 150 38 25 45 Size
CW
A-E10 a A 20 20 125 35 20 45 Ball shape
A-E10 a A 20 20 125 35 20 45
D
2.00mm a a a a
A-E12 a A 25 25 150 38 25 53 2.24mm a
A-E12 a A 25 25 150 38 25 53 2.39mm a
B-E18 a B 20 20 125 35 20 51 E 2.50mm a a a a
B-E18 a B 20 20 125 35 20 51 2.74mm a
A-E20 a B 25 25 150 38 25 59 a : Standard insert with dimensions
A-E20 a B 25 25 150 38 25 59
489
GROOVING
EXTERNAL
GY CW(Cutting width) 3.00–4.24
GROOVING(90°
type holder)
Recommended Cutting Condition >> 496 IDENTIFICATION >> 460
Product Information INSERTS >> 462 SPARE PARTS >> 1927
Technical Info >> 1971 ISO13399 Property >> 1966
2
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM Fig. A Fig. B LF
Insert GY2Mooooooooo-GU CU
TD
CU
IA
TD
1M
Insert GY2MoooooR/Loo-GM
A I
HF
HF
H
GROOVING
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*4 The maximum groove depth is limited by the workpiece diameter.
*
490
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque
xTKY25D
GYHL2525M90-M25R : 5.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
A-F06 a A 20 20 125 35 20 39 Seat
R Size Geometry name
A-F06 a A 20 20 125 35 20 39
A-F06 a A 25 25 150 38 25 45 F GYoo0300/0318/0324Foooo−Breaker shown below
A-F06 a A 25 25 150 38 25 45 G GYoo0400/0424Goooo−Breaker shown below
A-F10 a A 20 20 125 35 20 45
A-F10 a A 20 20 125 35 20 45 For grooving/cutting off breaker
A-F12 a A 25 25 150 38 25 53 Breaker GU GS GM 05-GM GFGS
Seat (For gummy steel) (Low) (Medium) (Cutting off) (Hardened steel)
A-F12 a A 25 25 150 38 25 53 Size
CW
B-F18 a B 20 20 125 35 20 51 Neutral Neutral Neutral With hand Neutral
B-F18 a B 20 20 125 35 20 51
F
3.00mm a a a a a
A-F20 a B 25 25 150 38 25 59 3.18mm a a a a
A-F20 a B 25 25 150 38 25 59 G 4.00mm a a a a a
A-G08 a A 25 25 150 38 25 47
L
A-G08 a A 25 25 150 38 25 47 For multifunctional grooving breaker
A-G12 a A 20 20 125 35 20 45 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying, Recessing)
A-G12 a A 20 20 125 35 20 45 Size
CW
A-G14 a A 25 25 150 38 25 53 Ball shape
A-G14 a A 25 25 150 38 25 53 3.00mm a
A-G25 a B 25 25 150 38 25 64 RE 0.2 a a a
A-G25 a B 25 25 150 38 25 64 RE 0.4 a a a
RE 0.8 a
F
3.18mm a
RE 0.2 a
RE 0.4 a
3.24mm a
4.00mm a
RE 0.2 a a a
G RE 0.4 a a a
RE 0.8 a a
4.24mm a
a : Standard insert with dimensions
491
GROOVING
EXTERNAL
GY CW(Cutting width) 4.75–6.35
GROOVING(90°
type holder)
Recommended Cutting Condition >> 496 IDENTIFICATION >> 460
Product Information INSERTS >> 462 SPARE PARTS >> 1927
Technical Info >> 1971 ISO13399 Property >> 1966
2
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
Insert GY2Mooooooooo-BM Insert GY2Mooooooooo-GS
-GM Fig. A Fig. B LF
Insert GY2Mooooooooo-GU CU
TD
CU
Insert GY2MoooooR/Loo-GM IA
TD
A I
HF
HF
H
GROOVING
6.35
*12 The maximum groove depth varies according to the insert used.
*3 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
The maximum cut off diameter CUTDIA varies according to the insert used.
*
492
GROOVING
GROOVING
zTKY30R
(Clamp Torque
xTKY25D
GYHL2525M90-M25R : 5.0N·m)
Fig.
Dimensions (mm) *3 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
A-H08 a A 25 25 150 38 25 47 Seat
R Size Geometry name
A-H08 a A 25 25 150 38 25 47
A-H12 a A 20 20 125 35 20 45 H GYoo0475/0500/0524Hoooo−Breaker shown below
A-H12 a A 20 20 125 35 20 45 J GYoo0600/0631/0635Joooo−Breaker shown below
A-H14 a A 25 25 150 38 25 53
A-H14 a A 25 25 150 38 25 53 For grooving/cutting off breaker
A-H25 a B 25 25 150 38 25 64 Breaker GU GS GM 05-GM GFGS
Seat (For gummy steel) (Low) (Medium) (Cutting off) (Hardened steel)
A-H25 a B 25 25 150 38 25 64 Size
CW Neutral Neutral Neutral With hand Neutral
4.75mm a a a a
H
5.00mm a a a a a
6.00mm a a a a
J
A-J08 a A 25 25 150 38 25 47 6.35mm a a a
L
A-J08 a A 25 25 150 38 25 47
A-J14 a A 25 25 150 38 25 53 For multifunctional grooving breaker
A-J14 a A 25 25 150 38 25 53 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying, Recessing)
A-J25 a B 25 25 150 38 25 64 Size
CW
A-J25 a B 25 25 150 38 25 64 Ball shape
4.75mm a
RE 0.2 a
RE 0.4 a
RE 0.8 a
H 5.00mm a
RE 0.2 a
RE 0.4 a a a
RE 0.8 a a a
5.24mm a
6.00mm a
RE 0.2 a
RE 0.4 a a a
RE 0.8 a a a
J 6.31mm a
6.35mm a
RE 0.2 a
RE 0.4 a
RE 0.8 a
a : Standard insert with dimensions
493
GROOVING
APMX 2
DMIN
Fig. A
A
45°
C
PM
D
B
WF
X
X
0.
50
APMX 2
5m
LF
WF2
m
HF CW LH
Enlarged view
H
GROOVING
*12 Cannot be used because external and face grooving blade interferes with the work.
* Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LH, WF and WF2 values may vary.
494
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
GYHR/L2525M50-M25R/L (Clamp Torque
xTKY25D
: 5.0N·m)
Fig.
Dimensions (mm) *2 Cutting Mode
Blade Stock H B LF LH HF WF WF2 Insert selection
C-D005 a A 20 20 125 40 20 32 1.6 Geometry name
R
C-D005 a A 20 20 125 40 20 32 1.6 GY2MooooooooN-BM
C-D005 a A 25 25 150 45 25 35 1.6
C-D005 a A 25 25 150 45 25 35 1.6 For multifunctional grooving breaker
C-E005 a A 20 20 125 40 20 32 1.8 Breaker BM
Seat (Copying, Recessing)
C-E005 a A 20 20 125 40 20 32 1.8 Size
CW
C-E005 a A 25 25 150 45 25 35 1.8 Ball shape
C-E005 a A 25 25 150 45 25 35 1.8 D 2.00mm a
C-F005 a A 20 20 125 40 20 32 2.0 E 2.50mm a
C-F005 a A 20 20 125 40 20 32 2.0
F
3.00mm a
C-F005 a A 25 25 150 45 25 35 2.0 3.18mm a
C-F005 a A 25 25 150 45 25 35 2.0 G 4.00mm a
C-G005 a A 20 20 125 40 20 32 2.4 4.75mm a
L H
C-G005 a A 20 20 125 40 20 32 2.4 5.00mm a
C-G005 a A 25 25 150 45 25 35 2.4 J
6.00mm a
C-G005 a A 25 25 150 45 25 35 2.4 6.35mm a
C-H005 a A 20 20 125 40 20 33 2.8 a : Standard insert with dimensions
C-H005 a A 20 20 125 40 20 33 2.8
C-H005 a A 25 25 150 45 25 36 2.8
C-H005 a A 25 25 150 45 25 36 2.8
C-J005 a A 25 25 150 44 25 36 3.4
C-J005 a A 25 25 150 44 25 36 3.4
495
GROOVING
NX2525 90 210
VP20RT 80 180
VP10RT 90 190
160─280HB
MY5015 110 250
NX2525 70 170
Carbon Steel
Alloy Steel
VP20RT 60 140
VP10RT 70 150
280HB<
MY5015 90 210
NX2525 55 135
GROOVING
M VP20RT 60 140
Stainless Steel < 270HB
VP10RT 70 150
K VP20RT 80 180
Tensile Strength
Gray Cast Iron VP10RT 90 190
< 300MPa
VP20RT 60 140
Tensile Strength
Ductile Cast Iron VP10RT 70 150
< 800MPa
MY5015 90 210
S VP20RT 30 60
Heat Resistant Alloy ─ VP10RT 40 70
Titanium Alloy
RT9010 40 70
H BC8110 80 120
Hardened steel 50HRC<
MB8025 80 120
(Note 1) VP20RT is the first recommended grade for materials other than hardened steel.
(Note 2) For VP10RT, VP20RT and MY5015, wet cutting is recommended.
Seat size
H
G 2.74
G
F 3.00
F F 3.18
E
E 3.24
D
D C G 4.00
4.24
0 0.03 0.1 0.2 0 0.1 0.2 0.3 0.4 4.75
Feed (mm/rev) Feed (mm/rev) H 5.00
5.24
6.00
J 6.31
6.35
K 8.00
496
GROOVING
Seat size
H
G G E 2.50
F 2.74
F
E 3.00
E F 3.18
D
C D 3.24
4.00
0 0.1 0.2 0.3 0.4 0 0.05 0.1 0.15 G 4.24
Feed (mm/rev) Feed (mm/rev)
4.75
H 5.00
5.24
MF BREAKER J
6.00
6.31
6.35
a Grooving a Turning
K 8.00
H G
2.0
G F
1.5 E
F D
E 1.0
GROOVING
D 0.5
MS BREAKER
a Grooving a Turning
Radial Depth of cut (mm)
H H
G G
2.0
F F
E
E 1.0
D D
MM BREAKER
a Grooving a Turning
Radial Depth of cut (mm)
H
H
G
2.0 F G
F
E D E
1.0
D
BM BREAKER
a Grooving a Turning
Radial Depth of cut (mm)
2.0
G G
F F
E 1.0 E
D D
0 0.1 0.2 0.3 0.4 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8
Feed (mm/rev) Feed (mm/rev)
497
GROOVING
a Decrease the feed rate by 20%. a Decrease the feed rate by 40%.
20mm
20mm
16mm
GYHR2020K00-M25R GYHR2020K00-M20R GYHR1616J00-M20R
GYM25 GYM20 GYM20
y In the case of mono block type holder for Swiss style lathes
Please refer to the tables above on recommended cutting conditions for
r 20 × 12 100% external grooving.
r 16 × 16 80% Apply the percentage ratio shown on each shank size with the values in
the table.
r 12 × 12 60%
r 10 × 10 50%
0.1 0.2
Recommended maximum feed
GROOVING
498
GROOVING
18 kp te
or ame
W Di
17
16
15 GYM20R/LB-D18
GYM20R/LB-E18
14 GYM20R/LB-F18
GROOVING
●In the case of mono block type holder for Swiss style lathes
The maximum groove depth is limited by the workpiece diameter.
ce
ie r
kp te
or ame
W Di
Due to interference, the maximum groove depth is limited by
the workpiece diameter.
11 13
12
10
11
9
Max. Groove Depth (mm)
10
8
9
7 8
6 7
5 6
5
4
4
3
3
2 GYSR/L1010JX00-o11 GYSR/L1212JX00-o13
2
1 1
0 22 24 32 57 103 0 26 30 43 59 96 288
Workpiece Diameter (mm) Workpiece Diameter (mm)
17 18
17
16
16
15 15
Max. Groove Depth (mm)
14 14
13 13
12 12
11
11
10
10 9
9 8
8 7
6
7
GYSR/L1616JX00-o17 5 GYSR/L2012JX00-o18
6
4
5 3
499
GROOVING
P VP20RT 80 180
Mild Steel < 180HB
VP10RT 90 190
VP20RT 60 140
NX2525 55 135
VP20RT 50 110
NX2525 45 105
M VP20RT 50 110
Stainless Steel < 350HB
VP10RT 60 120
GROOVING
K VP20RT 60 140
Tensile Strength
Gray Cast Iron VP10RT 70 150
< 350MPa
MY5015 90 210
VP20RT 50 110
Tensile Strength
Ductile Cast Iron VP10RT 60 120
< 800MPa
MY5015 80 160
S VP20RT 30 60
Titanium Alloy ─
VP10RT 40 70
VP20RT 30 60
Heat Resistant Alloy ─
VP10RT 40 70
(Note 1) VP20RT is the first recommended grade for materials other than hardened steel.
(Note 2) For VP10RT, VP20RT and MY5015, wet cutting is recommended.
Grooving Width Recess depth Distance from work surface to recess depth
CW (mm) APMX (mm) APMX 2 (mm)
2.00 1.50 0.646
AP
BM BREAKER
Minimum grooving diameter
Ensure the tool is suitable for the diameter being machined. Refer to the Min. Grooving Diameter D1 as shown in the table on the “page
number” to avoid a collision with the workpiece shown below.
aFor recessing
J 1st
Recommendation
H
G
Seat size
F
E
D
500
GROOVING
TOOL SELECTION
a Notes when selecting the tool body
Precautions when selecting a modular holder. Modular blade (1)
25mm
20mm
GYM25 GYHR2525M00-M25R GYHR2020K00-M25R
GYM25
20mm
20mm
GYHR2020K00-M25R
GYM25 GYM20 GYHR2020K00-M20R
aSelect a modular holder with the largest possible shank size aIf there is no restriction for use, select the largest modular
to maintain mounting rigidity. blade for the same shank size.
GROOVING
aSelect the shortest possible blade
aSelect the shortest possible blade suitable for the application. suitable for the application.
– 90º 90º
<Grooving/Cross-feed machining>
Set the cutting edge height to ±0.1mm parallel to the central axis.
<Cutting off>
Set the cutting edge height to 0–+0.2mm parallel to the central axis. aSet the insert perpendicular to the central axis.
Overhang
aWhen setting the tool, ensure that the overhang is as short as possible and avoid the step difference part as above figure shows.
501
GROOVING
MACHINING RECOMMENDATIONS
a Notes on multi-functional machining (MF,MS,MM and BM breakers)
Machining narrow grooves Machining wide grooves
xc z
aIt is recommended to carry out plunging in several passes. aIt is recommended that cross-feed machining is used.
Following the steps above makes it difficult for chips to elongate.
This also improves the accuracy of workpiece wall surface.
c
x v n
m ,
z b
zCarry out grooving. c Carry out cross feed b Carry out grooving. m Carry out grooving to ,Machining of the wall
xRetract the tool approx machining. n Retract the tool approx the end point of the surface, corner radius and
0.1mm. v Retract the tool approx 0.1mm. corner radius. bottom face should be
0.1mm. * Repeat the steps z – n. carried out in one process.
.
/
aWhen machining a wall, chip jamming can occur. In this case, stop aWhen a ring remains in a cross feed end process, finish
cross feed machining just before the wall (at a point less than the cross feed machining 1 – 1.5mm short of the end point,
insert width) then remove the remaining material by plunging. then remove the ring by plunging.
502
GROOVING
MACHINING RECOMMENDATIONS
a Notes on multi-functional machining (BM breaker)
Copying Roughing
APMX
aWith the BM breaker insert, 3 dimensional copying is possible. aUse plunging and cross-feed machining.
Set the depth of cut (APMX) to 40% less than the insert width. When machining the corner, vibration is likely to occur.
To avoid this, reduce the feed by 50%.
Finishing
Insert APMX 2 (mm)
GY2M0200D100N-BM 0.05
GROOVING
GY2M0250E125N-BM 0.10
GY2M0300F150N-BM
0.15
GY2M0318F159N-BM
GY2M0400G200N-BM 0.20
GY2M0475H238N-BM
APMX 2 0.24
GY2M0500H250N-BM
GY2M0600J300N-BM
aCarry out finishing in one process. 0.30
GY2M0635J318N-BM
For the depth of cut (APMX 2) when back turning, refer to the table on the right. GY2M0800K400N-BM 0.40
&D &D
Feed f Maximum spindle speed Revolution n
1.0xf max-n
0.8x(max-n)
0.5xf
start-n
Distance a Distance a
0 0.2xD 0.5xD 0 0.5xD
aWhen the cutting edge approaches the centre, reduce the aWhen using constant cutting speed during a cutting off cycle,
feed by 50%. it is recommended to limit the spindle speed to 80% of
aIf necessary, stop the feed prior to reaching the centre of the maximum to ensure stability.
workpiece to prevent it falling under its own weight. aTo prevent the workpiece from being expelled, lower the
spindle speed before finishing the grooving operation.
Insert
aWhen there is a centre stub on solid bar work or burrs are formed on pipe material, it is possible to decrease them by using a handed insert.
With a handed insert, machining tends to be less stable when compared to using a neutral insert.
Pay special attention to avoid fracturing of the cutting edge and decrease the feed when necessary.
503
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CDX
CW
WF
B
LF
Fig. A Fig. E
Insert GY2Mooooooooo-BM LH LH
DA
DA
XN
X
N/D
/DA
AX
XX
X
HF
HF
H
LH 2 LH 2
GROOVING
*1 Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
504
GROOVING
B
z
LF
Holder 5 pcs. x
Fig. C
LH
Clamp Screw Blade Screw Wrench *
DA
X
GYHR/L2020K00-M25R/L
N/D
AX
X
HF
GYHR/L2525M00-M25R/L GY06013M
H
TS55
zTKY30R
(Clamp Torque (Clamp Torque
HBH
GROOVING
LH 2
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
D12-040 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
D12-040 a C 20 20 125 39 60 20 26 5
D12-040 a A 25 25 150 39 57 25 28 ─ D GYoo0200/0224Doooo−Breaker shown below
D12-040 a A 25 25 150 39 57 25 28 ─
D12-040 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
D12-040 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
D12-040 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
D12-040 a E 32 32 170 39 57 32 35 ─ D 2.00mm a a a a
D12-050 a C 20 20 125 39 60 20 26 5
D12-050 a C 20 20 125 39 60 20 26 5 For multifunctional grooving breaker
D12-050 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
D12-050 a A 25 25 150 39 57 25 28 ─ Size
CW
D12-050 a E 32 25 170 39 57 32 28 ─ Ball shape
D12-050 a E 32 25 170 39 57 32 28 ─
D
2.00mm a a a a
D12-050 a E 32 32 170 39 57 32 35 ─ 2.24mm a
D12-050 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
D12-060 a C 20 20 125 39 60 20 26 5
L
D12-060 a C 20 20 125 39 60 20 26 5
D12-060 a A 25 25 150 39 57 25 28 ─
D12-060 a A 25 25 150 39 57 25 28 ─
D12-060 a E 32 25 170 39 57 32 28 ─
D12-060 a E 32 25 170 39 57 32 28 ─
D12-060 a E 32 32 170 39 57 32 35 ─
D12-060 a E 32 32 170 39 57 32 35 ─
D12-075 a C 20 20 125 39 60 20 26 5
D12-075 a C 20 20 125 39 60 20 26 5
D12-075 a A 25 25 150 39 57 25 28 ─
D12-075 a A 25 25 150 39 57 25 28 ─
D12-075 a E 32 25 170 39 57 32 28 ─
D12-075 a E 32 25 170 39 57 32 28 ─
D12-075 a E 32 32 170 39 57 32 35 ─
D12-075 a E 32 32 170 39 57 32 35 ─
505
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CDX
CW
WF
B
LF
Fig. A Fig. E
Insert GY2Mooooooooo-BM LH LH
DA
DA
XN
XN
/DA
/DA
XX
XX
HF
HF
H
LH 2 LH 2
GROOVING
*1 Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
506
GROOVING
B
z
LF
Holder 5 pcs. x
Fig. C
LH
Clamp Screw Blade Screw Wrench *
DA
X
GYHR/L2020K00-M25R/L
N/D
AX
X
HF
GYHR/L2525M00-M25R/L GY06013M
H
TS55
zTKY30R
(Clamp Torque (Clamp Torque
HBH
GROOVING
LH 2
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
D12-100 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
D12-100 a C 20 20 125 39 60 20 26 5
D12-100 a A 25 25 150 39 57 25 28 ─ D GYoo0200/0224Doooo−Breaker shown below
D12-100 a A 25 25 150 39 57 25 28 ─
D12-100 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
D12-100 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
D12-100 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
D12-100 a E 32 32 170 39 57 32 35 ─ D 2.00mm a a a a
D12-135 a C 20 20 125 39 60 20 26 5
D12-135 a C 20 20 125 39 60 20 26 5 For multifunctional grooving breaker
D12-135 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
D12-135 a A 25 25 150 39 57 25 28 ─ Size
CW
D12-135 a E 32 25 170 39 57 32 28 ─ Ball shape
L
D12-135 a E 32 25 170 39 57 32 28 ─
D
2.00mm a a a a
D12-135 a E 32 32 170 39 57 32 35 ─ 2.24mm a
D12-135 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
D12-180 a C 20 20 125 39 60 20 26 5
D12-180 a C 20 20 125 39 60 20 26 5
D12-180 a A 25 25 150 39 57 25 28 ─
D12-180 a A 25 25 150 39 57 25 28 ─
D12-180 a E 32 25 170 39 57 32 28 ─
D12-180 a E 32 25 170 39 57 32 28 ─
D12-180 a E 32 32 170 39 57 32 35 ─
D12-180 a E 32 32 170 39 57 32 35 ─
507
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CDX
CW
WF
B
LF
Fig. A Fig. E
Insert GY2Mooooooooo-BM LH LH
DA
DA
XN
XN
/DA
/DA
XX
XX
HF
HF
H
LH 2 LH 2
GROOVING
*1 Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
508
GROOVING
B
z
LF
Holder Number 5 pcs. x
Fig. C
LH
Clamp Screw Blade Screw Wrench *
DA
X
GYHR/L2020K00-M25R/L
N/D
AX
X
HF
GYHR/L2525M00-M25R/L GY06013M
H
TS55
zTKY30R
(Clamp Torque (Clamp Torque
HBH
GROOVING
LH 2
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
E12-040 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
E12-040 a C 20 20 125 39 60 20 26 5
E12-040 a A 25 25 150 39 57 25 28 ─ E GYoo0239/0250/0274Eoooo−Breaker shown below
E12-040 a A 25 25 150 39 57 25 28 ─
E12-040 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
E12-040 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
E12-040 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
E12-040 a E 32 32 170 39 57 32 35 ─
E
2.39mm a a a a
E12-050 a C 20 20 125 39 60 20 26 5 2.50mm a a a a
E12-050 a C 20 20 125 39 60 20 26 5
E12-050 a A 25 25 150 39 57 25 28 ─ For multifunctional grooving breaker
E12-050 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
E12-050 a E 32 25 170 39 57 32 28 ─ Size
CW
E12-050 a E 32 25 170 39 57 32 28 ─ Ball shape
E12-050 a E 32 32 170 39 57 32 35 ─ 2.39mm a
E12-050 a E 32 32 170 39 57 32 35 ─ E 2.50mm a a a a
E12-060 a C 20 20 125 39 60 20 26 5 2.74mm a
L
E12-060 a C 20 20 125 39 60 20 26 5 a : Standard insert with dimensions
E12-060 a A 25 25 150 39 57 25 28 ─
E12-060 a A 25 25 150 39 57 25 28 ─
E12-060 a E 32 25 170 39 57 32 28 ─
E12-060 a E 32 25 170 39 57 32 28 ─
E12-060 a E 32 32 170 39 57 32 35 ─
E12-060 a E 32 32 170 39 57 32 35 ─
E12-075 a C 20 20 125 39 60 20 26 5
E12-075 a C 20 20 125 39 60 20 26 5
E12-075 a A 25 25 150 39 57 25 28 ─
E12-075 a A 25 25 150 39 57 25 28 ─
E12-075 a E 32 25 170 39 57 32 28 ─
E12-075 a E 32 25 170 39 57 32 28 ─
E12-075 a E 32 32 170 39 57 32 35 ─
E12-075 a E 32 32 170 39 57 32 35 ─
509
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CDX
CW
WF
B
LF
Fig. A Fig. E
Insert GY2Mooooooooo-BM LH LH
DA
DA
XN
XN
/DA
/DA
XX
XX
HF
HF
H
LH 2 LH 2
GROOVING
*1 Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
510
GROOVING
CDX
* Wrench : z : Clamp Screw, x : Blade Screw
SPARE PARTS
CW
WF
B
z
LF
Holder 5 pcs. x
Fig. C
LH
Clamp Screw Blade Screw Wrench *
DA
X
GYHR/L2020K00-M25R/L
N/D
AX
X
HF
GYHR/L2525M00-M25R/L GY06013M
H
TS55
zTKY30R
(Clamp Torque (Clamp Torque
HBH
GROOVING
LH 2
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
E12-100 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
E12-100 a C 20 20 125 39 60 20 26 5
E12-100 a A 25 25 150 39 57 25 28 ─ E GYoo0239/0250/0274Eoooo−Breaker shown below
E12-100 a A 25 25 150 39 57 25 28 ─
E12-100 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
E12-100 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
E12-100 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
E12-100 a E 32 32 170 39 57 32 35 ─
E
2.39mm a a a a
E12-135 a C 20 20 125 39 60 20 26 5 2.50mm a a a a
E12-135 a C 20 20 125 39 60 20 26 5
E12-135 a A 25 25 150 39 57 25 28 ─ For multifunctional grooving breaker
E12-135 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
E12-135 a E 32 25 170 39 57 32 28 ─ Size
L CW
E12-135 a E 32 25 170 39 57 32 28 ─ Ball shape
E12-135 a E 32 32 170 39 57 32 35 ─ 2.39mm a
E12-135 a E 32 32 170 39 57 32 35 ─ E 2.50mm a a a a
E12-180 a C 20 20 125 39 60 20 26 5 2.74mm a
E12-180 a C 20 20 125 39 60 20 26 5 a : Standard insert with dimensions
E12-180 a A 25 25 150 39 57 25 28 ─
E12-180 a A 25 25 150 39 57 25 28 ─
E12-180 a E 32 25 170 39 57 32 28 ─
E12-180 a E 32 25 170 39 57 32 28 ─
E12-180 a E 32 32 170 39 57 32 35 ─
E12-180 a E 32 32 170 39 57 32 35 ─
511
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CDX
CW
WF
B
LF
Fig. A Fig. E
Insert GY2Mooooooooo-BM LH LH
DA
DA
XN
XN
/DA
/DA
XX
XX
HF
HF
H
LH 2 LH 2
GROOVING
*1 Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
512
GROOVING
B
z
LF
Holder 5 pcs. x
Fig. C
LH
Clamp Screw Blade Screw Wrench *
DA
X
GYHR/L2020K00-M25R/L
N/D
AX
X
HF
GYHR/L2525M00-M25R/L GY06013M
H
TS55
zTKY30R
(Clamp Torque (Clamp Torque
HBH
GROOVING
LH 2
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
F12-035 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
F12-035 a C 20 20 125 39 60 20 26 5
F12-035 a A 25 25 150 39 57 25 28 ─ F GYoo0300/0318/0324Foooo−Breaker shown below
F12-035 a A 25 25 150 39 57 25 28 ─
F12-035 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
F12-035 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
F12-035 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
F12-035 a E 32 32 170 39 57 32 35 ─
F
3.00mm a a a a
F12-040 a C 20 20 125 39 60 20 26 5 3.18mm a a a a
F12-040 a C 20 20 125 39 60 20 26 5
F12-040 a A 25 25 150 39 57 25 28 ─ For multifunctional grooving breaker
F12-040 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
F12-040 a E 32 25 170 39 57 32 28 ─ Size
L CW
F12-040 a E 32 25 170 39 57 32 28 ─ Ball shape
F12-040 a E 32 32 170 39 57 32 35 ─ 3.00mm a
F12-040 a E 32 32 170 39 57 32 35 ─ RE 0.2 a a a
F12-050 a C 20 20 125 39 60 20 26 5 RE 0.4 a a a
F12-050 a C 20 20 125 39 60 20 26 5
F
RE 0.8 a
F12-050 a A 25 25 150 39 57 25 28 ─ 3.18mm a
F12-050 a A 25 25 150 39 57 25 28 ─ RE 0.2 a
F12-050 a E 32 25 170 39 57 32 28 ─ RE 0.4 a
F12-050 a E 32 25 170 39 57 32 28 ─ 3.24mm a
F12-050 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
F12-050 a E 32 32 170 39 57 32 35 ─
513
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
514
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
F12-060 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
F12-060 a C 20 20 125 39 60 20 26 5
F12-060 a A 25 25 150 39 57 25 28 ─ F GYoo0300/0318/0324Foooo−Breaker shown below
F12-060 a A 25 25 150 39 57 25 28 ─
F12-060 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
F12-060 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
F12-060 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
F12-060 a E 32 32 170 39 57 32 35 ─
F
3.00mm a a a a
F20-060 a D 20 20 131 45 66 20 26 5 3.18mm a a a a
F20-060 a D 20 20 131 45 66 20 26 5
F20-060 a B 25 25 156 45 63 25 28 ─ For multifunctional grooving breaker
F20-060 a B 25 25 156 45 63 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
F20-060 a F 32 25 176 45 63 32 28 ─ Size
CW
F20-060 a F 32 25 176 45 63 32 28 ─ Ball shape
F20-060 a F 32 32 176 45 63 32 35 ─ 3.00mm a
F20-060 a F 32 32 176 45 63 32 35 ─ RE 0.2 a a a
F12-075 a C 20 20 125 39 60 20 26 5 RE 0.4 a a a
L
F12-075 a C 20 20 125 39 60 20 26 5
F
RE 0.8 a
F12-075 a A 25 25 150 39 57 25 28 ─ 3.18mm a
F12-075 a A 25 25 150 39 57 25 28 ─ RE 0.2 a
F12-075 a E 32 25 170 39 57 32 28 ─ RE 0.4 a
F12-075 a E 32 25 170 39 57 32 28 ─ 3.24mm a
F12-075 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
F12-075 a E 32 32 170 39 57 32 35 ─
F20-075 a D 20 20 131 45 66 20 26 5
F20-075 a D 20 20 131 45 66 20 26 5
F20-075 a B 25 25 156 45 63 25 28 ─
F20-075 a B 25 25 156 45 63 25 28 ─
F20-075 a F 32 25 176 45 63 32 28 ─
F20-075 a F 32 25 176 45 63 32 28 ─
F20-075 a F 32 32 176 45 63 32 35 ─
F20-075 a F 32 32 176 45 63 32 35 ─
515
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
516
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
F12-100 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
F12-100 a C 20 20 125 39 60 20 26 5
F12-100 a A 25 25 150 39 57 25 28 ─ F GYoo0300/0318/0324Foooo−Breaker shown below
F12-100 a A 25 25 150 39 57 25 28 ─
F12-100 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
F12-100 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
F12-100 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
F12-100 a E 32 32 170 39 57 32 35 ─
F
3.00mm a a a a
F20-100 a D 20 20 131 45 66 20 26 5 3.18mm a a a a
F20-100 a D 20 20 131 45 66 20 26 5
F20-100 a B 25 25 156 45 63 25 28 ─ For multifunctional grooving breaker
F20-100 a B 25 25 156 45 63 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
F20-100 a F 32 25 176 45 63 32 28 ─ Size
CW
F20-100 a F 32 25 176 45 63 32 28 ─ Ball shape
F20-100 a F 32 32 176 45 63 32 35 ─ 3.00mm a
F20-100 a F 32 32 176 45 63 32 35 ─ RE 0.2 a a a
F12-135 a C 20 20 125 39 60 20 26 5 RE 0.4 a a a
L
F12-135 a C 20 20 125 39 60 20 26 5
F
RE 0.8 a
F12-135 a A 25 25 150 39 57 25 28 ─ 3.18mm a
F12-135 a A 25 25 150 39 57 25 28 ─ RE 0.2 a
F12-135 a E 32 25 170 39 57 32 28 ─ RE 0.4 a
F12-135 a E 32 25 170 39 57 32 28 ─ 3.24mm a
F12-135 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
F12-135 a E 32 32 170 39 57 32 35 ─
F20-135 a D 20 20 131 45 66 20 26 5
F20-135 a D 20 20 131 45 66 20 26 5
F20-135 a B 25 25 156 45 63 25 28 ─
F20-135 a B 25 25 156 45 63 25 28 ─
F20-135 a F 32 25 176 45 63 32 28 ─
F20-135 a F 32 25 176 45 63 32 28 ─
F20-135 a F 32 32 176 45 63 32 35 ─
F20-135 a F 32 32 176 45 63 32 35 ─
517
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
518
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
F12-180 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
F12-180 a C 20 20 125 39 60 20 26 5
F12-180 a A 25 25 150 39 57 25 28 ─ F GYoo0300/0318/0324Foooo−Breaker shown below
F12-180 a A 25 25 150 39 57 25 28 ─
F12-180 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
F12-180 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
F12-180 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
F12-180 a E 32 32 170 39 57 32 35 ─
F
3.00mm a a a a
F20-180 a D 20 20 131 45 66 20 26 5 3.18mm a a a a
F20-180 a D 20 20 131 45 66 20 26 5
F20-180 a B 25 25 156 45 63 25 28 ─ For multifunctional grooving breaker
F20-180 a B 25 25 156 45 63 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
F20-180 a F 32 25 176 45 63 32 28 ─ Size
CW
F20-180 a F 32 25 176 45 63 32 28 ─ Ball shape
F20-180 a F 32 32 176 45 63 32 35 ─ 3.00mm a
F20-180 a F 32 32 176 45 63 32 35 ─ RE 0.2 a a a
F12-225 a C 20 20 125 39 60 20 26 5 RE 0.4 a a a
L
F12-225 a C 20 20 125 39 60 20 26 5
F
RE 0.8 a
F12-225 a A 25 25 150 39 57 25 28 ─ 3.18mm a
F12-225 a A 25 25 150 39 57 25 28 ─ RE 0.2 a
F12-225 a E 32 25 170 39 57 32 28 ─ RE 0.4 a
F12-225 a E 32 25 170 39 57 32 28 ─ 3.24mm a
F12-225 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
F12-225 a E 32 32 170 39 57 32 35 ─
F20-225 a D 20 20 131 45 66 20 26 5
F20-225 a D 20 20 131 45 66 20 26 5
F20-225 a B 25 25 156 45 63 25 28 ─
F20-225 a B 25 25 156 45 63 25 28 ─
F20-225 a F 32 25 176 45 63 32 28 ─
F20-225 a F 32 25 176 45 63 32 28 ─
F20-225 a F 32 32 176 45 63 32 35 ─
F20-225 a F 32 32 176 45 63 32 35 ─
519
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
520
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
G14-040 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
G14-040 a C 20 20 125 39 60 20 26 5
G14-040 a A 25 25 150 39 57 25 28 ─ G GYoo0400/0424Goooo−Breaker shown below
G14-040 a A 25 25 150 39 57 25 28 ─
G14-040 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
G14-040 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
G14-040 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
G14-040 a E 32 32 170 39 57 32 35 ─ G 4.00mm a a a a
G14-050 a C 20 20 125 39 60 20 26 5
G14-050 a C 20 20 125 39 60 20 26 5 For multifunctional grooving breaker
G14-050 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
G14-050 a A 25 25 150 39 57 25 28 ─ Size
CW
G14-050 a E 32 25 170 39 57 32 28 ─ Ball shape
G14-050 a E 32 25 170 39 57 32 28 ─ 4.00mm a
G14-050 a E 32 32 170 39 57 32 35 ─ RE 0.2 a a a
G14-050 a E 32 32 170 39 57 32 35 ─ G RE 0.4 a a a
G14-060 a C 20 20 125 39 60 20 26 5 RE 0.8 a a
L
G14-060 a C 20 20 125 39 60 20 26 5 4.24mm a
G14-060 a A 25 25 150 39 57 25 28 ─ a : Standard insert with dimensions
G14-060 a A 25 25 150 39 57 25 28 ─
G14-060 a E 32 25 170 39 57 32 28 ─
G14-060 a E 32 25 170 39 57 32 28 ─
G14-060 a E 32 32 170 39 57 32 35 ─
G14-060 a E 32 32 170 39 57 32 35 ─
G25-060 a D 20 20 136 50 71 20 26 5
G25-060 a D 20 20 136 50 71 20 26 5
G25-060 a B 25 25 161 50 68 25 28 ─
G25-060 a B 25 25 161 50 68 25 28 ─
G25-060 a F 32 25 181 50 68 32 28 ─
G25-060 a F 32 25 181 50 68 32 28 ─
G25-060 a F 32 32 181 50 68 32 35 ─
G25-060 a F 32 32 181 50 68 32 35 ─
521
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
522
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
G14-085 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
G14-085 a C 20 20 125 39 60 20 26 5
G14-085 a A 25 25 150 39 57 25 28 ─ G GYoo0400/0424Goooo−Breaker shown below
G14-085 a A 25 25 150 39 57 25 28 ─
G14-085 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
G14-085 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
G14-085 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
G14-085 a E 32 32 170 39 57 32 35 ─ G 4.00mm a a a a
G25-085 a D 20 20 136 50 71 20 26 5
G25-085 a D 20 20 136 50 71 20 26 5 For multifunctional grooving breaker
G25-085 a B 25 25 161 50 68 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
G25-085 a B 25 25 161 50 68 25 28 ─ Size
CW
G25-085 a F 32 25 181 50 68 32 28 ─ Ball shape
G25-085 a F 32 25 181 50 68 32 28 ─ 4.00mm a
G25-085 a F 32 32 181 50 68 32 35 ─ RE 0.2 a a a
G25-085 a F 32 32 181 50 68 32 35 ─ G RE 0.4 a a a
G14-125 a C 20 20 125 39 60 20 26 5 RE 0.8 a a
L
G14-125 a C 20 20 125 39 60 20 26 5 4.24mm a
G14-125 a A 25 25 150 39 57 25 28 ─ a : Standard insert with dimensions
G14-125 a A 25 25 150 39 57 25 28 ─
G14-125 a E 32 25 170 39 57 32 28 ─
G14-125 a E 32 25 170 39 57 32 28 ─
G14-125 a E 32 32 170 39 57 32 35 ─
G14-125 a E 32 32 170 39 57 32 35 ─
G25-125 a D 20 20 136 50 71 20 26 5
G25-125 a D 20 20 136 50 71 20 26 5
G25-125 a B 25 25 161 50 68 25 28 ─
G25-125 a B 25 25 161 50 68 25 28 ─
G25-125 a F 32 25 181 50 68 32 28 ─
G25-125 a F 32 25 181 50 68 32 28 ─
G25-125 a F 32 32 181 50 68 32 35 ─
G25-125 a F 32 32 181 50 68 32 35 ─
523
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
524
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
G14-180 a C 20 20 125 39 60 20 26 5
R Seat
Geometry name
G14-180 a C 20 20 125 39 60 20 26 5 Size
G14-180 a A 25 25 150 39 57 25 28 ─ G GYoo0400/0424Goooo−Breaker shown below
G14-180 a A 25 25 150 39 57 25 28 ─
G14-180 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
G14-180 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
G14-180 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
G14-180 a E 32 32 170 39 57 32 35 ─ G 4.00mm a a a a
G25-180 a D 20 20 136 50 71 20 26 5
G25-180 a D 20 20 136 50 71 20 26 5 For multifunctional grooving breaker
G25-180 a B 25 25 161 50 68 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
G25-180 a B 25 25 161 50 68 25 28 ─ Size
CW
G25-180 a F 32 25 181 50 68 32 28 ─ Ball shape
G25-180 a F 32 25 181 50 68 32 28 ─ 4.00mm a
G25-180 a F 32 32 181 50 68 32 35 ─ RE 0.2 a a a
G25-180 a F 32 32 181 50 68 32 35 ─ G RE 0.4 a a a
G14-250 a C 20 20 125 39 60 20 26 5
L
RE 0.8 a a
G14-250 a C 20 20 125 39 60 20 26 5 4.24mm a
G14-250 a A 25 25 150 39 57 25 28 ─ a : Standard insert with dimensions
G14-250 a A 25 25 150 39 57 25 28 ─
G14-250 a E 32 25 170 39 57 32 28 ─
G14-250 a E 32 25 170 39 57 32 28 ─
G14-250 a E 32 32 170 39 57 32 35 ─
G14-250 a E 32 32 170 39 57 32 35 ─
G25-250 a D 20 20 136 50 71 20 26 5
G25-250 a D 20 20 136 50 71 20 26 5
G25-250 a B 25 25 161 50 68 25 28 ─
G25-250 a B 25 25 161 50 68 25 28 ─
G25-250 a F 32 25 181 50 68 32 28 ─
G25-250 a F 32 25 181 50 68 32 28 ─
G25-250 a F 32 32 181 50 68 32 35 ─
G25-250 a F 32 32 181 50 68 32 35 ─
525
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
526
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
H14-050 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
H14-050 a C 20 20 125 39 60 20 26 5
H14-050 a A 25 25 150 39 57 25 28 ─ H GYoo0475/0500/0524Hoooo−Breaker shown below
H14-050 a A 25 25 150 39 57 25 28 ─
H14-050 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
H14-050 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
H14-050 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
H14-050 a E 32 32 170 39 57 32 35 ─
H
4.75mm a a a a
H14-060 a C 20 20 125 39 60 20 26 5 5.00mm a a a a
H14-060 a C 20 20 125 39 60 20 26 5
H14-060 a A 25 25 150 39 57 25 28 ─ For multifunctional grooving breaker
H14-060 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
H14-060 a E 32 25 170 39 57 32 28 ─ Size
L CW
H14-060 a E 32 25 170 39 57 32 28 ─ Ball shape
H14-060 a E 32 32 170 39 57 32 35 ─ 4.75mm a
H14-060 a E 32 32 170 39 57 32 35 ─ RE 0.2 a
H25-060 a D 20 20 136 50 71 20 26 5 RE 0.4 a
H25-060 a D 20 20 136 50 71 20 26 5 RE 0.8 a
H25-060 a B 25 25 161 50 68 25 28 ─ H 5.00mm a
H25-060 a B 25 25 161 50 68 25 28 ─ RE 0.2 a
H25-060 a F 32 25 181 50 68 32 28 ─ RE 0.4 a a a
H25-060 a F 32 25 181 50 68 32 28 ─ RE 0.8 a a a
H25-060 a F 32 32 181 50 68 32 35 ─ 5.24mm a
H25-060 a F 32 32 181 50 68 32 35 ─ a : Standard insert with dimensions
527
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
528
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
H14-085 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
H14-085 a C 20 20 125 39 60 20 26 5
H14-085 a A 25 25 150 39 57 25 28 ─ H GYoo0475/0500/0524Hoooo−Breaker shown below
H14-085 a A 25 25 150 39 57 25 28 ─
H14-085 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
H14-085 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
H14-085 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
H14-085 a E 32 32 170 39 57 32 35 ─
H
4.75mm a a a a
H25-085 a D 20 20 136 50 71 20 26 5 5.00mm a a a a
H25-085 a D 20 20 136 50 71 20 26 5
H25-085 a B 25 25 161 50 68 25 28 ─ For multifunctional grooving breaker
H25-085 a B 25 25 161 50 68 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
H25-085 a F 32 25 181 50 68 32 28 ─ Size
CW
H25-085 a F 32 25 181 50 68 32 28 ─ Ball shape
H25-085 a F 32 32 181 50 68 32 35 ─ 4.75mm a
H25-085 a F 32 32 181 50 68 32 35 ─ RE 0.2 a
H14-125 a C 20 20 125 39 60 20 26 5 RE 0.4 a
L
H14-125 a C 20 20 125 39 60 20 26 5 RE 0.8 a
H14-125 a A 25 25 150 39 57 25 28 ─ H 5.00mm a
H14-125 a A 25 25 150 39 57 25 28 ─ RE 0.2 a
H14-125 a E 32 25 170 39 57 32 28 ─ RE 0.4 a a a
H14-125 a E 32 25 170 39 57 32 28 ─ RE 0.8 a a a
H14-125 a E 32 32 170 39 57 32 35 ─ 5.24mm a
H14-125 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
H25-125 a D 20 20 136 50 71 20 26 5
H25-125 a D 20 20 136 50 71 20 26 5
H25-125 a B 25 25 161 50 68 25 28 ─
H25-125 a B 25 25 161 50 68 25 28 ─
H25-125 a F 32 25 181 50 68 32 28 ─
H25-125 a F 32 25 181 50 68 32 28 ─
H25-125 a F 32 32 181 50 68 32 35 ─
H25-125 a F 32 32 181 50 68 32 35 ─
529
GROOVING
4
Insert GY1M
00° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the right hand modular blade at the right hand holder and the left hand
modular blade at the left hand holder.
CDX
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
530
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
H14-180 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
H14-180 a C 20 20 125 39 60 20 26 5
H14-180 a A 25 25 150 39 57 25 28 ─ H GYoo0475/0500/0524Hoooo−Breaker shown below
H14-180 a A 25 25 150 39 57 25 28 ─
H14-180 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
H14-180 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
H14-180 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
H14-180 a E 32 32 170 39 57 32 35 ─
H
4.75mm a a a a
H25-180 a D 20 20 136 50 71 20 26 5 5.00mm a a a a
H25-180 a D 20 20 136 50 71 20 26 5
H25-180 a B 25 25 161 50 68 25 28 ─ For multifunctional grooving breaker
H25-180 a B 25 25 161 50 68 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
H25-180 a F 32 25 181 50 68 32 28 ─ Size
CW
H25-180 a F 32 25 181 50 68 32 28 ─ Ball shape
H25-180 a F 32 32 181 50 68 32 35 ─ 4.75mm a
H25-180 a F 32 32 181 50 68 32 35 ─ RE 0.2 a
H14-250 a C 20 20 125 39 60 20 26 5 RE 0.4 a
L
H14-250 a C 20 20 125 39 60 20 26 5 RE 0.8 a
H14-250 a A 25 25 150 39 57 25 28 ─ H 5.00mm a
H14-250 a A 25 25 150 39 57 25 28 ─ RE 0.2 a
H14-250 a E 32 25 170 39 57 32 28 ─ RE 0.4 a a a
H14-250 a E 32 25 170 39 57 32 28 ─ RE 0.8 a a a
H14-250 a E 32 32 170 39 57 32 35 ─ 5.24mm a
H14-250 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
H25-250 a D 20 20 136 50 71 20 26 5
H25-250 a D 20 20 136 50 71 20 26 5
H25-250 a B 25 25 161 50 68 25 28 ─
H25-250 a B 25 25 161 50 68 25 28 ─
H25-250 a F 32 25 181 50 68 32 28 ─
H25-250 a F 32 25 181 50 68 32 28 ─
H25-250 a F 32 32 181 50 68 32 35 ─
H25-250 a F 32 32 181 50 68 32 35 ─
531
GROOVING
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
532
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
J14-050 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
J14-050 a C 20 20 125 39 60 20 26 5
J14-050 a A 25 25 150 39 57 25 28 ─ J GYoo0600/0631/0635Joooo−Breaker shown below
J14-050 a A 25 25 150 39 57 25 28 ─
J14-050 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
J14-050 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
J14-050 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
J14-050 a E 32 32 170 39 57 32 35 ─
J
6.00mm a a a a
J14-070 a C 20 20 125 39 60 20 26 5 6.35mm a a a
J14-070 a C 20 20 125 39 60 20 26 5
J14-070 a A 25 25 150 39 57 25 28 ─ For multifunctional grooving breaker
J14-070 a A 25 25 150 39 57 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
J14-070 a E 32 25 170 39 57 32 28 ─ Size
CW
J14-070 a E 32 25 170 39 57 32 28 ─ Ball shape
J14-070 a E 32 32 170 39 57 32 35 ─ 6.00mm a
J14-070 a E 32 32 170 39 57 32 35 ─ RE 0.2 a
J25-070 a D 20 20 136 50 71 20 26 5 L RE 0.4 a a a
J25-070 a D 20 20 136 50 71 20 26 5 RE 0.8 a a a
J25-070 a B 25 25 161 50 68 25 28 ─ J 6.31mm a
J25-070 a B 25 25 161 50 68 25 28 ─ 6.35mm a
J25-070 a F 32 25 181 50 68 32 28 ─ RE 0.2 a
J25-070 a F 32 25 181 50 68 32 28 ─ RE 0.4 a
J25-070 a F 32 32 181 50 68 32 35 ─ RE 0.8 a
J25-070 a F 32 32 181 50 68 32 35 ─ a : Standard insert with dimensions
533
GROOVING
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
534
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Dimensions (mm)
Fig. Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
J14-110 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
J14-110 a C 20 20 125 39 60 20 26 5
J14-110 a A 25 25 150 39 57 25 28 ─ J GYoo0600/0631/0635Joooo−Breaker shown below
J14-110 a A 25 25 150 39 57 25 28 ─
J14-110 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
J14-110 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
J14-110 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
J14-110 a E 32 32 170 39 57 32 35 ─
J
6.00mm a a a a
J25-110 a D 20 20 136 50 71 20 26 5 6.35mm a a a
J25-110 a D 20 20 136 50 71 20 26 5
J25-110 a B 25 25 161 50 68 25 28 ─ For multifunctional grooving breaker
J25-110 a B 25 25 161 50 68 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
J25-110 a F 32 25 181 50 68 32 28 ─ Size
CW
J25-110 a F 32 25 181 50 68 32 28 ─ Ball shape
J25-110 a F 32 32 181 50 68 32 35 ─ 6.00mm a
J25-110 a F 32 32 181 50 68 32 35 ─ RE 0.2 a
L RE 0.4 a a a
RE 0.8 a a a
J 6.31mm a
6.35mm a
RE 0.2 a
RE 0.4 a
RE 0.8 a
a : Standard insert with dimensions
535
GROOVING
CW
WF
B
LF
LH LH
D
Fig. A Fig. B
A
XN
/D
A
HF
HF
XX
H
Insert GY2Mooooooooo-BM
LH 2 LH 2
LH LH
D
Fig. E Fig. F
A
XN
/D
A
XX
HF
HF
H
H
GROOVING
LH 2 LH 2
Right hand tool holder shown.
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH, LH 2, and WF values may vary.
* maximum groove depth varies according to the insert used.
536
GROOVING
CDX
B
LF SPARE PARTS
LH LH
D
Fig. C Fig. D z
A
XN
/D
Holder 5 pcs. x
HF
HF
A
H
XX
HBH GYHR/L2020K00-M25R/L
GYHR/L2525M00-M25R/L GY06013M TS55
zTKY30R
(Clamp Torque (Clamp Torque
GYHR/L3225P00-M25R/L : 6.0N·m) : 5.0N·m) xTKY25D
GROOVING
Right hand tool holder shown. GYHR/L3232P00-M25R/L
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH LH 2 HF WF HBH Insert selection
J14-170 a C 20 20 125 39 60 20 26 5 Seat
R Size Geometry name
J14-170 a C 20 20 125 39 60 20 26 5
J14-170 a A 25 25 150 39 57 25 28 ─ J GYoo0600/0631/0635Joooo−Breaker shown below
J14-170 a A 25 25 150 39 57 25 28 ─
J14-170 a E 32 25 170 39 57 32 28 ─ For grooving/cutting off breaker
J14-170 a E 32 25 170 39 57 32 28 ─ Seat Breaker GU GS GM GFGS
J14-170 a E 32 32 170 39 57 32 35 ─ Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
J14-170 a E 32 32 170 39 57 32 35 ─
J
6.00mm a a a a
J25-170 a D 20 20 136 50 71 20 26 5 6.35mm a a a
J25-170 a D 20 20 136 50 71 20 26 5
J25-170 a B 25 25 161 50 68 25 28 ─ For multifunctional grooving breaker
J25-170 a B 25 25 161 50 68 25 28 ─ Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
J25-170 a F 32 25 181 50 68 32 28 ─ Size
CW
J25-170 a F 32 25 181 50 68 32 28 ─ Ball shape
J25-170 a F 32 32 181 50 68 32 35 ─ 6.00mm a
J25-170 a F 32 32 181 50 68 32 35 ─ RE 0.2 a
J14-250 a C 20 20 125 39 60 20 26 5 RE 0.4 a a a
L
J14-250 a C 20 20 125 39 60 20 26 5 RE 0.8 a a a
J14-250 a A 25 25 150 39 57 25 28 ─ J 6.31mm a
J14-250 a A 25 25 150 39 57 25 28 ─ 6.35mm a
J14-250 a E 32 25 170 39 57 32 28 ─ RE 0.2 a
J14-250 a E 32 25 170 39 57 32 28 ─ RE 0.4 a
J14-250 a E 32 32 170 39 57 32 35 ─ RE 0.8 a
J14-250 a E 32 32 170 39 57 32 35 ─ a : Standard insert with dimensions
J25-250 a D 20 20 136 50 71 20 26 5
J25-250 a D 20 20 136 50 71 20 26 5
J25-250 a B 25 25 161 50 68 25 28 ─
J25-250 a B 25 25 161 50 68 25 28 ─
J25-250 a F 32 25 181 50 68 32 28 ─
J25-250 a F 32 25 181 50 68 32 28 ─
J25-250 a F 32 32 181 50 68 32 35 ─
J25-250 a F 32 32 181 50 68 32 35 ─
537
GROOVING
5
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
LF
Fig. A
Insert GY2Mooooooooo-BM
X
AX
N/D
X
DA
HF
H
GROOVING
*1 Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
538
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque (Clamp Torque
GYHL2525M90-M25R : 6.0N·m) : 5.0N·m) xTKY25D
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
D12-040 a A 25 25 150 38 25 53 Seat
R Size Geometry name
D12-040 a A 25 25 150 38 25 53
D12-050 a A 25 25 150 38 25 53 D GYoo0200/0224Doooo−Breaker shown below
D12-050 a A 25 25 150 38 25 53 E GYoo0239/0250/0274Eoooo−Breaker shown below
D12-060 a A 25 25 150 38 25 53
D12-060 a A 25 25 150 38 25 53 For grooving/cutting off breaker
D12-075 a A 25 25 150 38 25 53 Seat Breaker GU GS GM GFGS
D12-075 a A 25 25 150 38 25 53 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
D12-100 a A 25 25 150 38 25 53 D 2.00mm a a a a
D12-100 a A 25 25 150 38 25 53
E
2.39mm a a a a
D12-135 a A 25 25 150 38 25 53 2.50mm a a a a
D12-135 a A 25 25 150 38 25 53
D12-180 a A 25 25 150 38 25 53 For multifunctional grooving breaker
D12-180 a A 25 25 150 38 25 53 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
E12-040 a A 25 25 150 38 25 53 Size
L CW
E12-040 a A 25 25 150 38 25 53 Ball shape
E12-050 a A 25 25 150 38 25 53
D
2.00mm a a a a
E12-050 a A 25 25 150 38 25 53 2.24mm a
E12-060 a A 25 25 150 38 25 53 2.39mm a
E12-060 a A 25 25 150 38 25 53 E 2.50mm a a a a
E12-075 a A 25 25 150 38 25 53 2.74mm a
E12-075 a A 25 25 150 38 25 53 a : Standard insert with dimensions
E12-100 a A 25 25 150 38 25 53
E12-100 a A 25 25 150 38 25 53
E12-135 a A 25 25 150 38 25 53
E12-135 a A 25 25 150 38 25 53
E12-180 a A 25 25 150 38 25 53
E12-180 a A 25 25 150 38 25 53
539
GROOVING
5
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
LF
Fig. A Fig. B
Insert GY2Mooooooooo-BM
X
AX
N/D
X
DA
HF
HF
H
GROOVING
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
* maximum groove depth varies according to the insert used.
540
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque (Clamp Torque
GYHL2525M90-M25R : 6.0N·m) : 5.0N·m) xTKY25D
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
F12-035 a A 25 25 150 38 25 53 Seat
Geometry name
R Size
F12-035 a A 25 25 150 38 25 53
F12-040 a A 25 25 150 38 25 53 F GYoo0300/0318/0324Foooo−Breaker shown below
F12-040 a A 25 25 150 38 25 53
F12-050 a A 25 25 150 38 25 53 For grooving/cutting off breaker
F12-050 a A 25 25 150 38 25 53 Seat Breaker GU GS GM GFGS
F12-060 a A 25 25 150 38 25 53 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
F12-060 a A 25 25 150 38 25 53 F
3.00mm a a a a
F20-060 a B 25 25 150 38 25 59 3.18mm a a a a
F20-060 a B 25 25 150 38 25 59
F12-075 a A 25 25 150 38 25 53 For multifunctional grooving breaker
F12-075 a A 25 25 150 38 25 53 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
F20-075 a B 25 25 150 38 25 59 Size
CW
F20-075 a B 25 25 150 38 25 59 Ball shape
F12-100 a A 25 25 150 38 25 53 3.00mm a
F12-100 a A 25 25 150 38 25 53 RE 0.2 a a a
L
F20-100 a B 25 25 150 38 25 59 RE 0.4 a a a
F20-100 a B 25 25 150 38 25 59 F
RE 0.8 a
F12-135 a A 25 25 150 38 25 53 3.18mm a
F12-135 a A 25 25 150 38 25 53 RE 0.2 a
F20-135 a B 25 25 150 38 25 59 RE 0.4 a
F20-135 a B 25 25 150 38 25 59 3.24mm a
F12-180 a A 25 25 150 38 25 53 a : Standard insert with dimensions
F12-180 a A 25 25 150 38 25 53
F20-180 a B 25 25 150 38 25 59
F20-180 a B 25 25 150 38 25 59
F12-225 a A 25 25 150 38 25 53
F12-225 a A 25 25 150 38 25 53
F20-225 a B 25 25 150 38 25 59
F20-225 a B 25 25 150 38 25 59
541
GROOVING
5
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
LF
Fig. A Fig. B
Insert GY2Mooooooooo-BM
X
AX
N/D
X
DA
HF
HF
H
GROOVING
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
* maximum groove depth varies according to the insert used.
542
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque (Clamp Torque
GYHL2525M90-M25R : 6.0N·m) : 5.0N·m) xTKY25D
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
G14-040 a A 25 25 150 38 25 53 Seat
R Size Geometry name
G14-040 a A 25 25 150 38 25 53
G14-050 a A 25 25 150 38 25 53 G GYoo0400/0424Goooo−Breaker shown below
G14-050 a A 25 25 150 38 25 53
G14-060 a A 25 25 150 38 25 53 For grooving/cutting off breaker
G14-060 a A 25 25 150 38 25 53 Seat Breaker GU GS GM GFGS
G25-060 a B 25 25 150 38 25 64 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
G25-060 a B 25 25 150 38 25 64 G 4.00mm a a a a
G14-085 a A 25 25 150 38 25 53
G14-085 a A 25 25 150 38 25 53 For multifunctional grooving breaker
G25-085 a B 25 25 150 38 25 64 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
G25-085 a B 25 25 150 38 25 64 Size
CW
G14-125 a A 25 25 150 38 25 53 Ball shape
L
G14-125 a A 25 25 150 38 25 53 4.00mm a
G25-125 a B 25 25 150 38 25 64 RE 0.2 a a a
G25-125 a B 25 25 150 38 25 64 G RE 0.4 a a a
G14-180 a A 25 25 150 38 25 53 RE 0.8 a a
G14-180 a A 25 25 150 38 25 53 4.24mm a
G25-180 a B 25 25 150 38 25 64 a : Standard insert with dimensions
G25-180 a B 25 25 150 38 25 64
G14-250 a A 25 25 150 38 25 53
G14-250 a A 25 25 150 38 25 53
G25-250 a B 25 25 150 38 25 64
G25-250 a B 25 25 150 38 25 64
543
GROOVING
5
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM
B
WF
CDX
CW
LH
LF
Fig. A Fig. B
Insert GY2Mooooooooo-BM
X
AX
N/D
X
DA
HF
HF
H
GROOVING
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
* maximum groove depth varies according to the insert used.
544
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque (Clamp Torque
GYHL2525M90-M25R : 6.0N·m) : 5.0N·m) xTKY25D
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
H14-050 a A 25 25 150 38 25 53 Seat
R Size Geometry name
H14-050 a A 25 25 150 38 25 53
H14-060 a A 25 25 150 38 25 53 H GYoo0475/0500/0524Hoooo−Breaker shown below
H14-060 a A 25 25 150 38 25 53
H25-060 a B 25 25 150 38 25 64 For grooving/cutting off breaker
H25-060 a B 25 25 150 38 25 64 Seat Breaker GU GS GM GFGS
H14-085 a A 25 25 150 38 25 53 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
H14-085 a A 25 25 150 38 25 53
H
4.75mm a a a a
H25-085 a B 25 25 150 38 25 64 5.00mm a a a a
H25-085 a B 25 25 150 38 25 64
H14-125 a A 25 25 150 38 25 53 For multifunctional grooving breaker
H14-125 a A 25 25 150 38 25 53 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
H25-125 a B 25 25 150 38 25 64 Size
L CW
H25-125 a B 25 25 150 38 25 64 Ball shape
H14-180 a A 25 25 150 38 25 53 4.75mm a
H14-180 a A 25 25 150 38 25 53 RE 0.2 a
H25-180 a B 25 25 150 38 25 64 RE 0.4 a
H25-180 a B 25 25 150 38 25 64 RE 0.8 a
H14-250 a A 25 25 150 38 25 53 H 5.00mm a
H14-250 a A 25 25 150 38 25 53 RE 0.2 a
H25-250 a B 25 25 150 38 25 64 RE 0.4 a a a
H25-250 a B 25 25 150 38 25 64 RE 0.8 a a a
5.24mm a
545
GROOVING
B
WF
CDX
CW
LH
LF
Fig. A Fig. B
Insert GY2Mooooooooo-BM
X
AX
N/D
X
DA
HF
HF
H
GROOVING
*12 The
Dimensions shown are when gauge insert is used. If other insert geometries are used then LF, LH and WF values may vary.
* maximum groove depth varies according to the insert used.
546
GROOVING
Holder 5 pcs. x
GROOVING
zTKY30R
(Clamp Torque (Clamp Torque
GYHL2525M90-M25R : 6.0N·m) : 5.0N·m) xTKY25D
Fig.
Dimensions (mm) *1 Cutting Mode
Blade Stock H B LF LH HF WF Insert selection
J14-050 a A 25 25 150 38 25 53 Seat
R Size Geometry name
J14-050 a A 25 25 150 38 25 53
J14-070 a A 25 25 150 38 25 53 J GYoo0600/0631/0635Joooo−Breaker shown below
J14-070 a A 25 25 150 38 25 53
J25-070 a B 25 25 150 38 25 64 For grooving/cutting off breaker
J25-070 a B 25 25 150 38 25 64 Seat Breaker GU GS GM GFGS
J14-110 a A 25 25 150 38 25 53 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
J14-110 a A 25 25 150 38 25 53
J
6.00mm a a a a
J25-110 a B 25 25 150 38 25 64 6.35mm a a a
J25-110 a B 25 25 150 38 25 64
J14-170 a A 25 25 150 38 25 53 For multifunctional grooving breaker
J14-170 a A 25 25 150 38 25 53 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
J25-170 a B 25 25 150 38 25 64 Size
L CW
J25-170 a B 25 25 150 38 25 64 Ball shape
J14-250 a A 25 25 150 38 25 53 6.00mm a
J14-250 a A 25 25 150 38 25 53 RE 0.2 a
J25-250 a B 25 25 150 38 25 64 RE 0.4 a a a
J25-250 a B 25 25 150 38 25 64 RE 0.8 a a a
J 6.31mm a
6.35mm a
RE 0.2 a
RE 0.4 a
RE 0.8 a
a : Standard insert with dimensions
547
GROOVING
RELATIONSHIP BETWEEN THE MODULAR BLADE AND FEED PER ROTATION [For Face Grooving]
100
GYM25R/LD-G14-ooo
90
GYM25R/LD-H14-ooo
GYM25R/LD-D12-ooo GYM25R/LD-J14-ooo
80 GYM25R/LD-E12-ooo
Feed (%)
GYM25R/LD-F12-ooo
70
60 GYM25R/LD-F20-ooo
GYM25R/LD-G25-ooo
50 GYM25R/LD-H25-ooo
GYM25R/LD-J25-ooo
40
(Note) Adjust the feed per rotation in the cutting conditions to the percentage shown in the table above.
P VP20RT 80 180
NX2525 70 170
VP20RT 60 140
VP10RT 70 150
160─280HB
MY5015 90 210
VP10RT 60 120
280HB<
MY5015 80 160
NX2525 45 105
M VP20RT 50 110
Stainless Steel < 270HB
VP10RT 60 120
K VP20RT 60 140
Tensile Strength
Gray Cast Iron VP10RT 70 150
< 300MPa
MY5015 90 210
VP20RT 50 110
Tensile Strength
Ductile Cast Iron VP10RT 60 120
< 800MPa
MY5015 80 160
S VP20RT 30 60
Heat Resistant Alloy
─ VP10RT 40 70
Titanium Alloy
RT9010 40 70
H BC8110 60 100
Hardened steel 50HRC<
MB8025 60 100
(Note 1) VP20RT is the first recommended grade for materials other than hardened steel.
(Note 2) For VP10RT, VP20RT and MY5015, wet cutting is recommended.
548
GROOVING
GROOVING
: 1st recommended area
a M : Ungrounded (GY M-)
* a G : Grounded (GY G-)
*
J J
H H
Seat size
Seat size
G G
F F
E E
D D
PLUNGING
: 1st recommended area
a M : Ungrounded (GY M-)
* a G : Grounded (GY G-)
*
GROOVING
J J
H H
Seat size
Seat size
G G
F F
E E
D D
2.5
Insert Width (mm) Insert Width (mm)
H
2.0 D 2.00 G 4.00
G 2.24 4.24
1.5 2.39 4.75
F E 2.50 H 5.00
2.74 5.24
1.0 E 3.00 6.00
F 3.18 J 6.31
0.5 3.24 6.35
D
H
2.0
G
F
1.0 E
Seat size
2.0 J
H
G
1.0 F
E
D
0 0.2 0.4 0.6
Feed (mm/rev)
549
GROOVING
TOOL SELECTION
a Notes when selecting the tool body
Modular blade (1) Modular blade (2)
DAXX (Max.)
DAXN (Min.)
aSelect the shortest possible blade suitable for the application.
z x
z x c
aSelect a modular holder with the largest possible shank size to maintain mounting rigidity.
550
GROOVING
+ +
–
–
aSet the cutting edge height to ±0.1mm parallel to the central axis. aIf interference occurs even when the correct blade is used,
aCutting edge centre height check should be done by traverse the cutting edge height could be incorrect.
machining towards the centre with a very small depth of cut When interference occurs on the inner side of the blade,
and ensure that an even surface and no material remains at the cutting edge height is set too high.
the centre point afterwards. When interference occurs on the outer side of the blade,
the cutting edge height is set too low.
GROOVING
Setting the tool Tool overhang
Parallel Parallel
aSet the insert parallel to the central axis. aWhen setting the tool, ensure that the overhang is as short as
possible and avoid the step difference part as above figure
shows.
MACHINING RECOMMENDATIONS
a Notes when face grooving
z c x z
x
c
551
GROOVING
MACHINING RECOMMENDATIONS
a Notes when face grooving (2)
Notes on the first pass (1)
aDuring the first face grooving pass it is difficult to disperse broken chips and can lead to problems such as a chipped insert.
Maintain longer chips that disperse easily by decreasing the feed per rotation.
aWhen chips become too long, use peck feed to break them into a suitable length.
z
X
x c
APM
aWhen machining a face groove in several passes, machine from the outer diameter towards the centre so that space for discharging
chips is created to prevent insert damage caused by chip jamming.
aPlunging width of cut is recommended to be set at 60 - 80% of the insert width. This enhances the effect of the chipbreaker by
enlarging the width of the groove to improve chip dispersal.
Notes when wide face grooving by combination of plunging and traverse machining (1)
z x c
APMX×2 APMX×3
aWhen face groove machining by using plunge feed and traverse machining, always machine from the outer diameter towards the
centre to disperse chips outward to avoid chip jamming problems.
aSet the depth of cut within 40% of the insert width.
552
GROOVING
Notes when wide face grooving by combination of plunging and traverse machining (2)
z x c
aWhen infeed machining at the bottom of a deep groove, chips may interfere on the cutting edge near the centre wall.
In such cases, stop infeed machining just before the centre wall (at a point less than the insert width) then remove the remaining
material by plunging.
GROOVING
Notes when copying (BM Breaker)
APMX 2
aWith the BM breaker insert, 3 dimensional copying is possible. Set the depth of cut (APMX 2) to 30% less than the insert width.
Finishing (1)
z x c
aWhen finish cutting, machine continuously from the outer wall to the bottom of the groove, then finally plunge cut the centre wall.
GY2M0500H250N-BM
GY2M0600J300N-BM
0.25
GY2M0635J318N-BM
553
GROOVING
UGH
Spare Parts >> 1927 Technical Info >> 1971
Product Information ISO13399 Property >> 1966
CW±0.1
HTB
HF
B 7°
LF
150°
Dimensions(mm)
Order Number Stock Insert Number Tool Block
CW CUTDIA * 1
CDX * 2
B HF HTB LF Wrench
WF
B
CU
TD CU
IA LF TD LF
CW±0.1 CW±0.1 IA
LH LH
HF
HF
H
HBH
Stock Dimensions(mm)
Order Number Insert Number
554
GROOVING
TOOL BLOCK
HF
H
B
OAW
Block 110
* *
GROOVING
z z z x x
Dimensions(mm)
Order Number Stock
H HF HBH OAH B OAW Clamp Bridge Clamp Screw Wrench Set Bolt Wrench
KGBN26-20 a 20 20 11 45 20 43 KGC1 LS15T TKY25R HSC08016 HKY60R
KGBN26-25 a 25 25 6 45 25 48 KGC1 LS15T TKY25R HSC08016 HKY60R
KGBN32-20 a 20 20 15.6 52 20 43 KGC1 LS15T TKY25R HSC08016 HKY60R
KGBN32-25 a 25 25 10.6 52 25 48 KGC1 LS15T TKY25R HSC08016 HKY60R
555
GROOVING
INSERTS
NX2525
UTi20T
RER/L
US735 CW
Groove Depth:0 when
machining diameter is y
[ a a
(Note) The above insert is not compatible with other manufacturer's holders.
556
GROOVING
MG EXTERNAL
GROOVING
Spare Parts >> 1927 Technical Info >> 1971
Product Information ISO13399 Property >> 1966
CDX
WF
B
LF
CW
5°
HF
H
6°
Right hand tool holder shown.
Stock Dimensions(mm)
Order Number Insert Number
R L CW CDX H B LF HF WF
1.25 1.2
MGHR/L2020K3315 1.45 1.5 20 20 125 20 20.2
GROOVING
a a
43470 1.25
MGHR/L2525M4315 a a 1.45 1.5 25 25 150 25 25.2
1.5 < CW < 2.3 *
3.0 (3.5)
MGHR/L2525M4323 a a 2.3 < CW < 3.3 *
4.5 (4.0) 25 25 150 25 25.2
MGHR/L2525M4333 a a 3.3 < CW < 4.7(4.0) * 4.5 (5.0)* 25 25 150 25 25.2
44500
MGHR/L2525M4447 a a MGTR/L 4.7 < CW < 6.3 4.5 25 25 150 25 25.2
─
44600
557
GROOVING
SPARE PARTS
*
Order Number
MGHR/L2525M4447
558
GROOVING
INSERTS
Stock Dimensions(mm)
Coated Cermet Carbide CBN
VP20MF
NX2525
MB8025
UTi20T
Order Number Geometry
CW CDX IC S RER/L
R L R L R L R
MGTR/L33125 a a a a a 1.25 1.2 9.525 4.76 0.2 MGTR/L...
MGTR/L33145 a a a a a 1.45 1.5 9.525 4.76 0.2
MGTR/L33150 a a a a a a 1.5 3 9.525 4.76 0.2
MGTR/L33175 a a a a a a 1.75 3 9.525 4.76 0.2
MGTR/L33200 a a a a a a 2 3 9.525 4.76 0.2
MGTR/L33230 a a a a 2.3 3 9.525 4.76 0.2
MGTR/L33250 a a a a a a 2.5 3 9.525 4.76 0.3
MGTR/L33270 a a a a 2.7 3 9.525 4.76 0.3
MGTR/L33280 a a a a 2.8 3 9.525 4.76 0.3
MGTR/L33300 a a a a a a 3 3 9.525 4.76 0.3
GROOVING
MGTR/L33320 a a a 3.2 3 9.525 4.76 0.3
MGTR/L33330 a a a 3.3 3 9.525 4.76 0.3
MGTR/L33350 a a a a a 3.5 3 9.525 4.76 0.3
CDX
MGTR/L33400 a a a a a a 4 3 9.525 4.76 0.3
S
REL
CW ±0.025
MGTR/L43125 a a a a a a a 1.25 1.2 12.7 4.76 0.2
MGTR/L43145 a a a a a 1.45 1.5 12.7 4.76 0.2 RER
IC
MGTR/L43175 a a a a a a 1.75 3 12.7 4.76 0.2
MGTR/L43200 a a a a a a a 2 3.5 12.7 4.76 0.2
Right hand insert shown.
MGTR/L43230 a a a a a a 2.3 3 12.7 4.76 0.2
MGTR/L43250 a a a a a a a 2.5 4.5 12.7 4.76 0.3
CBN Insert
MGTR/L43260 a a a a a 2.6 4.5 12.7 4.76 0.3 CDX
REL
MGTR/L43270 2.7 4.5 12.7 4.76 0.3
S
a a a a
CW ±0.03
559
GROOVING
SMG EXTERNAL
GROOVING
Spare Parts >> 1927 Technical Info >> 1971
Product Information ISO13399 Property >> 1966
B
1.5° WF
1.5° WF
LH LH
2.5
2.5
5° 5°
HF
HF
H
H
6° 3.5 LF
HBH
LF 6°
Right hand tool holder only.
*
Stock Insert Number Dimensions(mm)
Order Number
SMGHR1212F16 a
SMGTR 12 12 80 16.5 12 16 2 FC400890T TKY10F
SMTTR
SMGHR1616H16 a 16×2ppp 16 16 100 20 16 20 ─ FC400890T TKY10F
160360pp
16×2pppC
SMGHR2020K16 a 20 20 125 20 20 25 ─ FC400890T TKY10F
SMGHR2525M16 a 25 25 150 20 25 32 ─ FC400890T TKY10F
560
GROOVING
NX2525
UTi20T
CW CDX IC S BCH
HTi10
(45°)
CW +0.05
S
SMGTR16X2080C a a a 0.8 2 9.525 2 0.1
0
SMGTR16X2090C a a a 0.9 2 9.525 2 0.1 BCH
SMGTR16X2095C a a a 0.95 2 9.525 2 0.1
IC
SMGTR16X2100C a a a 1 2.5 9.525 2 0.1
SMGTR16X2110C a a a 1.1 2.5 9.525 2 0.1
SMGTR16X2120C a a a 1.2 2.5 9.525 2 0.1
GROOVING
SMGTR16X2130C a a a 1.3 2.5 9.525 2 0.1
60°
RE
SMTTR16036002 a 0.2 1.75─2.0 K Gray Cast Tensile Strength UTi20T
Iron
100
(80─120)
0.1
(0.05─0.15)
< 350MPa HTi10
9.525
561
GROOVING
6
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM aMono block type (Air / coolant through)
90°
WF
DMIN
CDX
F2
Fig. A H
LDRED
Insert GY2Mooooooooo-BM LF DCON
90°
Fig. B
WF
CDX
F2
LDRED
LF
GROOVING
Seat
CW CDX
*3 DMIN Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock Modular Blade Stock DCON LF LDRED
R GYAR20K90A-D06 a ─ ─ B 20 125 30
Mono Block
L GYAL20K90A-D06 a ─ ─ B 20 125 30
25
R GYAR20Q90A-D06 a ─ ─ A 20 180 30
Mono Block
L GYAL20Q90A-D06 a ─ ─ A 20 180 30
6
R GYAR25K90B-D06 a ─ ─ B 25 125 40
Mono Block
L GYAL25K90B-D06 a ─ ─ B 25 125 40
32
R GYAR25R90B-D06 a ─ ─ A 25 200 40
Mono Block
L GYAL25R90B-D06 a ─ ─ A 25 200 40
R GYDR32L90C-M20L a GYM20LA-D10 a D 32 140 50
Modular
L GYDL32L90C-M20R a GYM20RA-D10 a D 32 140 50
4 ─ 9.5
* 1 40
Modular
R GYDR32S90C-M20L a GYM20LA-D10 a C 32 250 50
2.00 L GYDL32S90C-M20R a GYM20RA-D10 a C 32 250 50
D
2.24 R GYDR40M90D-M20L a GYM20LA-D10 a D 40 150 60
Modular
L GYDL40M90D-M20R a GYM20RA-D10 a D 40 150 60
5.5 ─ 9.5
*1 50
Modular
R GYDR40T90D-M20L a GYM20LA-D10 a C 40 300 60
L GYDL40T90D-M20R a GYM20RA-D10 a C 40 300 60
R GYDR40M90D-M25L a GYM25LA-D12 a D 40 150 60
Modular
L GYDL40M90D-M25R a GYM25RA-D12 a D 40 150 60
60
R GYDR40T90D-M25L a GYM25LA-D12 a C 40 300 60
Modular
L GYDL40T90D-M25R a GYM25RA-D12 a C 40 300 60
7 ─ 11.5 1
* Modular
R GYDR50P90F-M25L a GYM25LA-D12 a D 50 170 80
L GYDL50P90F-M25R a GYM25RA-D12 a D 50 170 80
70
R GYDR50T90F-M25L a GYM25LA-D12 a C 50 300 80
Modular
L GYDL50T90F-M25R a GYM25RA-D12 a C 50 300 80
* 1 The maximum groove depth varies according to the cutting diameter DMIN.
* 2 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LDRED, WF and F2 values may vary.
* 3 The maximum groove depth (CDX) is a value within the dimension LDRED.
562
GROOVING
DMIN
Holder x
CDX
x 4 pcs.
F2
Fig. C
LDRED LF
H
DCON Clamp Screw Blade Screw Wrench *
GYAR/L20o90A-o06 zGY05016S
(Clamp Torque ─ zTKY20R
GYAR/L25o90B-o06 : 5.0N·m)
90°
Fig. D GYDR/L32o90C-M20L/R xGY06013M TS407
zTKY30R
(Clamp Torque (Clamp Torque
WF
xTKY15D
GYDR/L40o90D-M20L/R : 6.0N·m) : 3.5N·m)
CDX
F2
GROOVING
LF zTKY30R
(Clamp Torque (Clamp Torque
xTKY25D
Right hand tool holder shown. GYDR/L50o90F-M25L/R : 6.0N·m) : 5.0N·m)
Fig.
Dimensions (mm) *2 Cutting Mode
Blade Stock DCON LF LDRED WF F2 H Insert selection
─ B 20 125 30 14.5 4.5 18 Seat
Geometry name
R Size
─ B 20 125 30 14.5 4.5 18
─ A 20 180 30 14.5 4.5 18 D GYoo0200/0224Doooo−Breaker shown below
─ A 20 180 30 14.5 4.5 18
─ B 25 125 40 19 6.5 23 For grooving/cutting off breaker
─ B 25 125 40 19 6.5 23 Seat Breaker GU GS GM GFGS
─ A 25 200 40 19 6.5 23 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
─ A 25 200 40 19 6.5 23 D 2.00mm a a a a
A-D10 a D 32 140 50 22 6 30
RA-D10 a D 32 140 50 22 6 30 For multifunctional grooving breaker
A-D10 a C 32 250 50 22 6 30 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
RA-D10 a C 32 250 50 22 6 30 Size
CW
A-D10 a D 40 150 60 28 8 37 Ball nose
L
RA-D10 a D 40 150 60 28 8 37 D
2.00mm a a a a
A-D10 a C 40 300 60 28 8 37 2.24mm a
RA-D10 a C 40 300 60 28 8 37 a : Standard insert with dimensions
A-D12 a D 40 150 60 28 8 37
RA-D12 a D 40 150 60 28 8 37
A-D12 a C 40 300 60 28 8 37
RA-D12 a C 40 300 60 28 8 37
A-D12 a D 50 170 80 34 9 47
RA-D12 a D 50 170 80 34 9 47
A-D12 a C 50 300 80 34 9 47
RA-D12 a C 50 300 80 34 9 47
563
GROOVING
6
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM aMono block type (Air / coolant through)
90°
WF
DMIN
CDX
F2
Fig. A H
LDRED
Insert GY2Mooooooooo-BM LF DCON
90°
Fig. B
WF
CDX
F2
LDRED
LF
GROOVING
Seat
CW CDX
*3 DMIN Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock Modular Blade Stock DCON LF LDRED
R GYAR20K90A-E06 a ─ ─ B 20 125 30
Mono Block
L GYAL20K90A-E06 a ─ ─ B 20 125 30
25
R GYAR20Q90A-E06 a ─ ─ A 20 180 30
Mono Block
L GYAL20Q90A-E06 a ─ ─ A 20 180 30
6
R GYAR25K90B-E06 a ─ ─ B 25 125 40
Mono Block
L GYAL25K90B-E06 a ─ ─ B 25 125 40
32
R GYAR25R90B-E06 a ─ ─ A 25 200 40
Mono Block
L GYAL25R90B-E06 a ─ ─ A 25 200 40
R GYDR32L90C-M20L a GYM20LA-E10 a D 32 140 50
Modular
L GYDL32L90C-M20R a GYM20RA-E10 a D 32 140 50
2.39
4 ─ 9.5
* 1 40
Modular
R GYDR32S90C-M20L a GYM20LA-E10 a C 32 250 50
L GYDL32S90C-M20R a GYM20RA-E10 a C 32 250 50
E 2.50
R GYDR40M90D-M20L a GYM20LA-E10 a D 40 150 60
2.74 Modular
L GYDL40M90D-M20R a GYM20RA-E10 a D 40 150 60
5.5 ─ 9.5
*1 50
Modular
R GYDR40T90D-M20L a GYM20LA-E10 a C 40 300 60
L GYDL40T90D-M20R a GYM20RA-E10 a C 40 300 60
R GYDR40M90D-M25L a GYM25LA-E12 a D 40 150 60
Modular
L GYDL40M90D-M25R a GYM25RA-E12 a D 40 150 60
60
R GYDR40T90D-M25L a GYM25LA-E12 a C 40 300 60
Modular
L GYDL40T90D-M25R a GYM25RA-E12 a C 40 300 60
7 ─ 11.5 1
* Modular
R GYDR50P90F-M25L a GYM25LA-E12 a D 50 170 80
L GYDL50P90F-M25R a GYM25RA-E12 a D 50 170 80
70
R GYDR50T90F-M25L a GYM25LA-E12 a C 50 300 80
Modular
L GYDL50T90F-M25R a GYM25RA-E12 a C 50 300 80
* 1 The maximum groove depth varies according to the cutting diameter DMIN.
* 2 Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LDRED, WF and F2 values may vary.
* 3 The maximum groove depth (CDX) is a value within the dimension LDRED.
564
GROOVING
DMIN
Holder x
CDX
x 4 pcs.
F2
Fig. C LDRED
LF
H
DCON Clamp Screw Blade Screw Wrench *
GYAR/L20o90A-o06 zGY05016S
(Clamp Torque ─ zTKY20R
GYAR/L25o90B-o06 : 5.0N·m)
90°
Fig. D GYDR/L32o90C-M20L/R xGY06013M TS407
zTKY30R
(Clamp Torque (Clamp Torque
WF
xTKY15D
GYDR/L40o90D-M20L/R : 6.0N·m) : 3.5N·m)
CDX
F2
GROOVING
LDRED zTKY30R
LF (Clamp Torque (Clamp Torque
xTKY25D
Right hand tool holder shown. GYDR/L50o90F-M25L/R : 6.0N·m) : 5.0N·m)
Fig.
Dimensions (mm) *2 Cutting Mode
Blade Stock DCON LF LDRED WF F2 H Insert selection
─ B 20 125 30 14.5 4.5 18 Seat
Geometry name
R Size
─ B 20 125 30 14.5 4.5 18
─ A 20 180 30 14.5 4.5 18 E GYoo0239/0250/0274Eoooo−Breaker shown below
─ A 20 180 30 14.5 4.5 18
─ B 25 125 40 19 6.5 23 For grooving/cutting off breaker
─ B 25 125 40 19 6.5 23 Seat Breaker GU GS GM GFGS
─ A 25 200 40 19 6.5 23 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
─ A 25 200 40 19 6.5 23 E
2.39mm a a a a
A-E10 a D 32 140 50 22 6 30 2.50mm a a a a
RA-E10 a D 32 140 50 22 6 30
A-E10 a C 32 250 50 22 6 30 For multifunctional grooving breaker
RA-E10 a C 32 250 50 22 6 30 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
A-E10 a D 40 150 60 28 8 37 Size
L CW
RA-E10 a D 40 150 60 28 8 37 Ball nose
A-E10 a C 40 300 60 28 8 37 2.39mm a
RA-E10 a C 40 300 60 28 8 37 E 2.50mm a a a a
A-E12 a D 40 150 60 28 8 37 2.74mm a
RA-E12 a D 40 150 60 28 8 37 a : Standard insert with dimensions
A-E12 a C 40 300 60 28 8 37
RA-E12 a C 40 300 60 28 8 37
A-E12 a D 50 170 80 34 9 47
RA-E12 a D 50 170 80 34 9 47
A-E12 a C 50 300 80 34 9 47
RA-E12 a C 50 300 80 34 9 47
565
GROOVING
6
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM aMono block type (Air / coolant through)
90°
WF
DMIN
CDX
F2
Fig. A H
LDRED
Insert GY2Mooooooooo-BM LF DCON
90°
Fig. B
WF
CDX
F2
LDRED
LF
GROOVING
Seat
CW CDX
*3 DMIN Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock Modular Blade Stock DCON LF LDRED
R GYAR20K90A-F06 a ─ ─ B 20 125 30
Mono Block
L GYAL20K90A-F06 a ─ ─ B 20 125 30
25
R GYAR20Q90A-F06 a ─ ─ A 20 180 30
Mono Block
L GYAL20Q90A-F06 a ─ ─ A 20 180 30
6
R GYAR25K90B-F06 a ─ ─ B 25 125 40
Mono Block
L GYAL25K90B-F06 a ─ ─ B 25 125 40
32
R GYAR25R90B-F06 a ─ ─ A 25 200 40
Mono Block
L GYAL25R90B-F06 a ─ ─ A 25 200 40
R GYDR32L90C-M20L a GYM20LA-F10 a D 32 140 50
Modular
L GYDL32L90C-M20R a GYM20RA-F10 a D 32 140 50
3.00
4 ─ 9.5
* 1 40
Modular
R GYDR32S90C-M20L a GYM20LA-F10 a C 32 250 50
L GYDL32S90C-M20R a GYM20RA-F10 a C 32 250 50
F 3.18
R GYDR40M90D-M20L a GYM20LA-F10 a D 40 150 60
3.24 Modular
L GYDL40M90D-M20R a GYM20RA-F10 a D 40 150 60
5.5 ─ 9.5
*1 50
Modular
R GYDR40T90D-M20L a GYM20LA-F10 a C 40 300 60
L GYDL40T90D-M20R a GYM20RA-F10 a C 40 300 60
R GYDR40M90D-M25L a GYM25LA-F12 a D 40 150 60
Modular
L GYDL40M90D-M25R a GYM25RA-F12 a D 40 150 60
60
R GYDR40T90D-M25L a GYM25LA-F12 a C 40 300 60
Modular
L GYDL40T90D-M25R a GYM25RA-F12 a C 40 300 60
7 ─ 11.5 1
* Modular
R GYDR50P90F-M25L a GYM25LA-F12 a D 50 170 80
L GYDL50P90F-M25R a GYM25RA-F12 a D 50 170 80
70
R GYDR50T90F-M25L a GYM25LA-F12 a C 50 300 80
Modular
L GYDL50T90F-M25R a GYM25RA-F12 a C 50 300 80
*12 The maximum groove depth varies according to the cutting diameter DMIN.
*3 The maximum groove depth (CDX) is a value within the dimension LDRED.
Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LDRED, WF and F2 values may vary.
*
566
GROOVING
DMIN
Holder x
CDX
x 4 pcs.
F2
Fig. C LDRED
LF
H
DCON Clamp Screw Blade Screw Wrench *
GYAR/L20o90A-F06 zGY05016S
(Clamp Torque ─ zTKY20R
GYAR/L25o90B-ooo : 5.0N·m)
90°
Fig. D GYDR/L32o90C-M20L/R xGY06013M TS407
zTKY30R
(Clamp Torque (Clamp Torque
WF
xTKY15D
GYDR/L40o90D-M20L/R : 6.0N·m) : 3.5N·m)
CDX
F2
GROOVING
LDRED zTKY30R
LF (Clamp Torque (Clamp Torque
xTKY25D
Right hand tool holder shown. GYDR/L50o90F-M25L/R : 6.0N·m) : 5.0N·m)
Fig.
Dimensions (mm) *2 Cutting Mode
Blade Stock DCON LF LDRED WF F2 H Insert selection
─ B 20 125 30 14.5 4.5 18 Seat
Geometry name
R Size
─ B 20 125 30 14.5 4.5 18
─ A 20 180 30 14.5 4.5 18 F GYoo0300/0318/0324Foooo−Breaker shown below
─ A 20 180 30 14.5 4.5 18
─ B 25 125 40 19 6.5 23 For grooving/cutting off breaker
─ Breaker
B 25 125 40 19 6.5 23 Seat GU GS GM GFGS
Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
─ A 25 200 40 19 6.5 23
─ A 25 200 40 19 6.5 23 F
3.00mm a a a a
RA-F10 a D 32 140 50 22 6 30
A-F10 a C 32 250 50 22 6 30 For multifunctional grooving breaker
RA-F10 a C 32 250 50 22 6 30 Seat
Breaker MF MS MM BM
(Finish) (Low) (Medium) (Copying)
A-F10 a D 40 150 60 28 8 37 Size
CW
RA-F10 D 40 150 60 28 8 37 Ball nose
a L
A-F10 a C 40 300 60 28 8 37 3.00mm a
567
GROOVING
6
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM aMono block type (Air / coolant through)
90°
WF
DMIN
CDX
F2
Fig. A H
LDRED
Insert GY2Mooooooooo-BM LF DCON
90°
Fig. B
WF
CDX
F2
LDRED
LF
GROOVING
Seat
CW CDX
*3 DMIN Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock Modular Blade Stock DCON LF LDRED
R GYAR25K90B-G07 a ─ ─ B 25 125 40
Mono Block
L GYAL25K90B-G07 a ─ ─ B 25 125 40
7 32
R GYAR25R90B-G07 a ─ ─ A 25 200 40
Mono Block
L GYAL25R90B-G07 a ─ ─ A 25 200 40
R GYDR32L90C-M20L a GYM20LA-G12 a D 32 140 50
Modular
L GYDL32L90C-M20R a GYM20RA-G12 a D 32 140 50
*
4.5 ─ 11.5 1 40
Modular
R GYDR32S90C-M20L a GYM20LA-G12 a C 32 250 50
L GYDL32S90C-M20R a GYM20RA-G12 a C 32 250 50
R GYDR40M90D-M20L a GYM20LA-G12 a D 40 150 60
Modular
L GYDL40M90D-M20R a GYM20RA-G12 a D 40 150 60
4.00
*
6 ─ 11.5 1 50
Modular
R GYDR40T90D-M20L a GYM20LA-G12 a C 40 300 60
L GYDL40T90D-M20R a GYM20RA-G12 a C 40 300 60
G
4.24 R GYDR40M90D-M25L a GYM25LA-G14 a D 40 150 60
Modular
L GYDL40M90D-M25R a GYM25RA-G14 a D 40 150 60
60
R GYDR40T90D-M25L a GYM25LA-G14 a C 40 300 60
Modular
L GYDL40T90D-M25R a GYM25RA-G14 a C 40 300 60
7.5 ─ 13
*1 Modular
R GYDR50P90F-M25L a GYM25LA-G14 a D 50 170 80
L GYDL50P90F-M25R a GYM25RA-G14 a D 50 170 80
70
R GYDR50T90F-M25L a GYM25LA-G14 a C 50 300 80
Modular
L GYDL50T90F-M25R a GYM25RA-G14 a C 50 300 80
*12 The maximum groove depth varies according to the cutting diameter DMIN.
*3 The maximum groove depth (CDX) is a value within the dimension LDRED.
Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LDRED, WF and F2 values may vary.
*
568
GROOVING
DMIN
Holder x
CDX
x 4 pcs.
F2
Fig. C LDRED
LF
H
DCON Clamp Screw Blade Screw Wrench *
GYAR/L20o90A-F06 zGY05016S
(Clamp Torque ─ zTKY20R
GYAR/L25o90B-ooo : 5.0N·m)
90°
Fig. D GYDR/L32o90C-M20L/R xGY06013M TS407
zTKY30R
(Clamp Torque (Clamp Torque
WF
xTKY15D
GYDR/L40o90D-M20L/R : 6.0N·m) : 3.5N·m)
CDX
F2
GROOVING
LDRED zTKY30R
LF (Clamp Torque (Clamp Torque
xTKY25D
Right hand tool holder shown. GYDR/L50o90F-M25L/R : 6.0N·m) : 5.0N·m)
Dimensions (mm)
Fig. Cutting Mode
Blade Stock DCON LF LDRED WF F2 H Insert selection
─ B 25 125 40 19 6.5 23 Seat
Geometry name
R Size
─ B 25 125 40 19 6.5 23
─ A 25 200 40 19 6.5 23 G GYoo0400/0424Goooo−Breaker shown below
─ A 25 200 40 19 6.5 23
A-G12 a D 32 140 50 22 6 30 For grooving/cutting off breaker
Breaker
RA-G12 a D 32 140 50 22 6 30 Seat GU GS GM GFGS
Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
A-G12 a C 32 250 50 22 6 30
RA-G12 a C 32 250 50 22 6 30 G 4.00mm a a a a
A-G12 a D 40 150 60 28 8 37
RA-G12 a D 40 150 60 28 8 37 For multifunctional grooving breaker
A-G12 a C 40 300 60 28 8 37 Seat
Breaker MF MS MM BM
(Finish) (Low) (Medium) (Copying)
RA-G12 a C 40 300 60 28 8 37 Size
CW
A-G14 a D 40 150 60 28 8 37 Ball nose
RA-G14 D 40 150 60 28 8 37 4.00mm a
a L
A-G14 a C 40 300 60 28 8 37 RE 0.2 a a a
569
GROOVING
6
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM aMono block type (Air / coolant through)
90°
WF
DMIN
CDX
F2
Fig. A H
LDRED
Insert GY2Mooooooooo-BM LF DCON
90°
Fig. B
WF
CDX
F2
LDRED
LF
GROOVING
Seat
CW CDX
*3 DMIN Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock Modular Blade Stock DCON LF LDRED
R GYAR25K90B-H07 a ─ ─ B 25 125 40
Mono Block
L GYAL25K90B-H07 a ─ ─ B 25 125 40
7 32
R GYAR25R90B-H07 a ─ ─ A 25 200 40
Mono Block
L GYAL25R90B-H07 a ─ ─ A 25 200 40
R GYDR32L90C-M20L a GYM20LA-H12 a D 32 140 50
Modular
L GYDL32L90C-M20R a GYM20RA-H12 a D 32 140 50
*
4.5 ─ 11.5 1 40
Modular
R GYDR32S90C-M20L a GYM20LA-H12 a C 32 250 50
L GYDL32S90C-M20R a GYM20RA-H12 a C 32 250 50
R GYDR40M90D-M20L a GYM20LA-H12 a D 40 150 60
Modular
L GYDL40M90D-M20R a GYM20RA-H12 a D 40 150 60
*
6 ─ 11.5 1 50
Modular
R GYDR40T90D-M20L a GYM20LA-H12 a C 40 300 60
L GYDL40T90D-M20R a GYM20RA-H12 a C 40 300 60
4.75 R GYDR40M90D-M25L a GYM25LA-H14 a D 40 150 60
Modular
H 5.00 L GYDL40M90D-M25R a GYM25RA-H14 a D 40 150 60
60
5.24 R GYDR40T90D-M25L a GYM25LA-H14 a C 40 300 60
Modular
L GYDL40T90D-M25R a GYM25RA-H14 a C 40 300 60
7.5 ─ 13
*1 Modular
R GYDR50P90F-M25L a GYM25LA-H14 a D 50 170 80
L GYDL50P90F-M25R a GYM25RA-H14 a D 50 170 80
70
R GYDR50T90F-M25L a GYM25LA-H14 a C 50 300 80
Modular
L GYDL50T90F-M25R a GYM25RA-H14 a C 50 300 80
*12 The maximum groove depth varies according to the cutting diameter DMIN.
*3 The maximum groove depth (CDX) is a value within the dimension LDRED.
Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LDRED, WF and F2 values may vary.
*
570
GROOVING
DMIN
Holder x
CDX
x 4 pcs.
F2
Fig. C LDRED
LF
H
DCON Clamp Screw Blade Screw Wrench *
zGY05016S
GYAR/L25o90B-o07 (Clamp Torque ─ zTKY20R
: 5.0N·m)
90°
Fig. D GYDR/L32o90C-M20L/R xGY06013M TS407
zTKY30R
(Clamp Torque (Clamp Torque
WF
xTKY15D
GYDR/L40o90D-M20L/R : 6.0N·m) : 3.5N·m)
CDX
F2
GROOVING
LDRED zTKY30R
LF (Clamp Torque (Clamp Torque
xTKY25D
Right hand tool holder shown. GYDR/L50o90F-M25L/R : 6.0N·m) : 5.0N·m)
Fig.
Dimensions (mm) *2 Cutting Mode
Blade Stock DCON LF LDRED WF F2 H Insert selection
─ B 25 125 40 19 6.5 23 Seat
Geometry name
R Size
─ B 25 125 40 19 6.5 23
─ A 25 200 40 19 6.5 23 H GYoo0475/0500/0524Hoooo−Breaker shown below
─ A 25 200 40 19 6.5 23
A-H12 a D 32 140 50 22 6 30 For grooving/cutting off breaker
RA-H12 a D 32 140 50 22 6 30 Seat Breaker GU GS GM GFGS
A-H12 a C 32 250 50 22 6 30 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
RA-H12 a C 32 250 50 22 6 30 H
4.75mm a a a a
A-H12 a D 40 150 60 28 8 37 5.00mm a a a a
RA-H12 a D 40 150 60 28 8 37
A-H12 a C 40 300 60 28 8 37 For multifunctional grooving breaker
RA-H12 a C 40 300 60 28 8 37 Breaker MF MS MM BM
Seat (Finish) (Low) (Medium) (Copying)
A-H14 a D 40 150 60 28 8 37 Size
CW
RA-H14 a D 40 150 60 28 8 37 Ball nose
A-H14 a C 40 300 60 28 8 37 L 4.75mm a
RA-H14 a C 40 300 60 28 8 37 RE 0.2 a
A-H14 a D 50 170 80 34 9 47 RE 0.4 a
RA-H14 a D 50 170 80 34 9 47 RE 0.8 a
A-H14 a C 50 300 80 34 9 47 H 5.00mm a
RA-H14 a C 50 300 80 34 9 47 RE 0.2 a
RE 0.4 a a a
RE 0.8 a a a
5.24mm a
571
GROOVING
6
Insert GY1M
90° type holder
2Mooooooooo-GM Insert GY2Gooooooooo-MF
(Note 1) Please order the modular blade and modular holder separately.
(Note 2) Please set the left hand modular blade at the right hand holder and the right hand
modular blade at the left hand holder.
Insert GY2Mooooooooo-GS
-GU Insert GY2Mooooooooo-MS
Insert GY1Gooooooooo- GF
GS Insert GY2Mooooooooo-MM aMono block type (Air / coolant through)
90°
WF
DMIN
CDX
F2
Fig. A H
LDRED
Insert GY2Mooooooooo-BM LF DCON
90°
Fig. B
WF
CDX
F2
LDRED
LF
GROOVING
Seat
CW CDX
*3 DMIN Type
Hand
Order Number
Fig.
Dimension
Size (R/L)
Holder Stock Modular Blade Stock DCON LF LDRED
6.00
J 6.31
6.35
*12 The maximum groove depth varies according to the cutting diameter DMIN.
*3 The maximum groove depth (CDX) is a value within the dimension LDRED.
Dimensions shown are when the gauge insert is used. If other insert geometries are used then LF, LDRED, WF and F2 values may vary.
*
572
GROOVING
DMIN
Holder x
CDX
x 4 pcs.
F2
Fig. C LDRED
LF
H
DCON Clamp Screw Blade Screw Wrench *
zGY05016S
GYAR/L25o90B-o07 (Clamp Torque ─ zTKY20R
: 5.0N·m)
90°
Fig. D GYDR/L32o90C-M20L/R xGY06013M TS407
zTKY30R
(Clamp Torque (Clamp Torque
WF
xTKY15D
GYDR/L40o90D-M20L/R : 6.0N·m) : 3.5N·m)
CDX
F2
GROOVING
LDRED zTKY30R
LF (Clamp Torque (Clamp Torque
xTKY25D
Right hand tool holder shown. GYDR/L50o90F-M25L/R : 6.0N·m) : 5.0N·m)
Dimensions (mm)
Fig. Cutting Mode
Blade Stock DCON LF LDRED WF F2 H Insert selection
A-J14 a D 40 150 60 28 8 37 Seat
Geometry name
R Size
RA-J14 a D 40 150 60 28 8 37
A-J14 a C 40 300 60 28 8 37 J GYoo0600/0631/0635Joooo−Breaker shown below
RA-J14 a C 40 300 60 28 8 37
A-J14 a D 50 170 80 34 9 47 For grooving/cutting off breaker
RA-J14 a D 50 170 80 34 9 47 Seat Breaker GU GS GM GFGS
A-J14 a C 50 300 80 34 9 47 Size CW (For gummy steel) (Low) (Medium) (Hardened steel)
RA-J14 a C 50 300 80 34 9 47 J
6.00mm a a a a
6.35mm a a a
573
GROOVING
P VP20RT 80 180
Mild Steel < 160HB VP10RT 90 190
NX2525 70 170
VP20RT 60 140
VP10RT 70 150
160─280HB
MY5015 90 210
NX2525 45 105
GROOVING
M VP20RT 50 110
Stainless Steel < 270HB
VP10RT 60 120
K VP20RT 60 140
Tensile Strength
Gray Cast Iron VP10RT 70 150
< 300MPa
MY5015 90 210
VP20RT 50 110
Tensile Strength
Ductile Cast Iron VP10RT 60 120
< 800MPa
MY5015 80 160
S VP20RT 30 60
Heat Resistant Alloy
─ VP10RT 40 70
Titanium Alloy
RT9010 40 70
H BC8110 60 100
Hardened steel 50HRC<
MB8025 60 100
(Note 1) VP20RT is the first recommended grade for materials other than hardened steel.
(Note 2) For VP10RT, VP20RT and MY5015, wet cutting is recommended.
574
GROOVING
GROOVING
13 13
GYM25L/RA-G14 GYM25L/RA-G14
12 GYM25L/RA-H14
GYM25L/RA-J14
12 GYM25L/RA-H14
GYM25L/RA-J14
11.5 11.5
11 11
10 10
GYM25L/RA-D12 GYM25L/RA-D12
9 GYM25L/RA-E12 9
GYM25L/RA-E12
8 GYM25L/RA-F12 8 GYM25L/RA-F12
7.5 7.5
7 7
575
GROOVING
GROOVING
(Note 1) The cutting diameter 100% represents the minimum cutting diameter (DMIN).
(Note 2) The graph on the left shows the cutting conditions when setting the feed to 100%.
105
: 1st
Shank Diameter DCON (mm)
50 recommended area
100
40
Feed (%)
95
32
90
25
20 85
80
0 0.05 0.1 0.15 0.2 100 150 200 250
Feed (mm/rev) Hole diameter (%)
3.0 J
2.5 H
G
2.0
1.5 F
E
1.0
0.5 D
Feed (mm/rev)
Seat size
3.0 J
2.0 G
F
E
1.0
D
0 0.1 0.2 0.3
Feed (mm/rev)
(Note) The above cutting conditions are for when using the tool overhang (LU) 1.6-2.0 times larger than the shank diameter (DCON). (L/D=1.6-2.0)
When using L/D larger than 2.0, reduce the cutting conditions.
D 2.24
2.39
E 2.50
2.74
3.00
F 3.18
3.24 LU
G 4.00
4.24
4.75
H 5.00
5.24
6.00
J 6.31
6.35
576
GROOVING
TOOL SELECTION
a Notes when selecting the tool body
Holder
Tool chuck
Tool chuck
aWhen the overhang is the same, select a holder with the largest
possible shank size to ensure sufficient clamping rigidity.
GROOVING
Modular blade (1) Modular blade (2)
Tool chuck
F2
LDRED
577
GROOVING
MACHINING RECOMMENDATIONS
a Notes on multi-function machining (MF, MS, MM and BM breakers)
For internal grooving, the machining methods for external grooving can be used,
but please note the following precautions.
z x
0.5
aSupply large amounts of coolant for effective chip disposal aAs continuous chips tend to elongate at the back of the bore,
GROOVING
during cutting. Maintain supply until the tool has been the above operation is recommended.
retracted completely for improved chip disposal. The recommended width of cut for x is 0.5mm.
Coolant
aWhen the depth of cut is shallower than the cutting aWhen the groove depth is larger than the cutting edge width, carry
edge width, continuous chips are usually produced. out plunging in the steps above to break up chips efficiently.
When plunging in several passes, it is recommended
to carry out machining in the steps above. This ensures
that coolant reaches the cutting edge and chips are
easily discharged.
v c x z
0.5 0.5
aWhen chip breaking and aWide face grooving when the corner R of the work piece is aIt is recommended to carry
disposal are especially equal to the corner R of the insert, machine as shown above. out grooving from the front
important, cross-feed (When corner R of the work piece is larger than corner R of end of the workpiece.
machining is recommended. the insert, refer to the description of external wide grooving.) This reduces workpiece
aIf the groove depth exceeds a given level, chips may elongate deflection.
at the wall. In such a case, increase the feed and carry out
machining as shown above.
578
GROOVING
DCON
C03FR-BLS a 2.0 3 80 15 3.2 1.0 4°
DCON Shank Diameter
Flat Area
C04FR-BLS a 2.5 4 80 20 4.2 1.5
WF2
C05HR-BLS a 3.0 5 100 25 5.2 2.0 CW
Flat Area LDRED
LF
GROOVING
a : Inventory maintained in Japan. (MICRO MINI is available in 1 piece in one pack.)
M Stainless Steel 40 (30 ─ 50) 0.05 ( ─ 0.1) 0.2 (0.1 ─ 0.3) 5 < 0.4 0 ─ 0.03
< 200HB
K Gray Cast Iron 40 (30 ─ 50) 0.05 ( ─ 0.05) 0.2 (0.1 ─ 0.3) 5 0.1 ─ 0.5 0.01 ─ 0.05
< 350MPa
N Non-ferrous Metal 80 (60 ─ 100) 0.05 ( ─ 0.1) 0.3 (0.1 ─ 0.5) 5 0.1 ─ 0.5 0 ─ 0.03
*Cutting edge is not honed. Please hone according to the application before machining.
y GRINDING THE CUTTING EDGE OF MICRO-MINI
aMICRO-MINI can be applied to boring and grooving as supplied. But, it can also be reground as shown below.
aFor shaping and regrinding, use a diamond whetstone approximately #250 ─ #400. Please grind according to the application using the figure below as a reference.
Grinding
1°–2°
25°
Grinding Examples
579
GROOVING
·CG
WF
WF2
DMIN CW±0.03 REL RER DCON H
LU
LF
CDX
Stock
* CG03ppRS-ppB Only
Dimensions (mm)
Order Number Micro Grain Carbide Coated Breaker
TF15 VP15TF DMIN CW WF2 RER/L DCON LF LU CDX WF H
CG0305RS-10 a a Without 3 1 1 0.05 3 50 5 6 1.3 2.7
CG0305RS-10B a a With 3 1 1 0.05 3 50 5 6 1.3 2.7
GROOVING
580
GROOVING
Stock
Dimensions (mm)
Order Number Micro Grain Carbide Coated Breaker
TF15 VP15TF DMIN CW WF2 RER/L DCON LF LU CDX WF H
CG0712RS-10 a a Without 7 1 2 0.05 7 85 12 8 3.3 6.4
CG0712RS-10B a a With 7 1 2 0.05 7 85 12 8 3.3 6.4
CG0713RS-20 a a Without 7 2 2 0.1 7 85 13 8 3.3 6.4
CG0713RS-20B a a With 7 2 2 0.1 7 85 13 8 3.3 6.4
CG07RS-10 a a Without 7 1 2 0.05 7 85 25 8 3.3 6.4
CG07RS-10B a a With 7 1 2 0.05 7 85 25 8 3.3 6.4
CG07RS-20 a a Without 7 2 2 0.1 7 85 26 8 3.3 6.4
CG07RS-20B a a With 7 2 2 0.1 7 85 26 8 3.3 6.4
GROOVING
P Carbon Steel · Alloy Steel 180 ─ 280HB 80 (40 ─ 120) 0.02 (0.01 ─ 0.03) 0.03 (0.01 ─ 0.05) CG Type Micro-Mini Twin
M Stainless Steel < 200HB 80 (40 ─ 120) 0.02 (0.01 ─ 0.03) 0.03 (0.01 ─ 0.05)
Tensile Strength
K Gray Cast Iron < 350MPa 80 (40 ─ 120) 0.03 (0.01 ─ 0.05) 0.03 (0.01 ─ 0.05)
LU + 2 (mm)
N Non-ferrous Metal ─ 120 (80 ─ 160) 0.03 (0.01 ─ 0.05) 0.05 (0.01 ─ 0.08) Holder
(Note) Wet cutting is recommended.
Cutting Edge
Insert Direction
When using this type of holder, there is a possibility that damage to the shank and the 2nd cutting
s Fig.2 3rd Clamping Screw
edge can occur. Make sure that the clamping screws are tightened to the set torque value.
Additionally make sure that there is no clamping screw near the 2nd cutting edge as this can 1 2 3
break the boring bar.
e When using Mitsubishi holders
When using holders with a tool overhang of recommended quantity, ensure that the 3rd clamping Insert Point 2nd Cutting Edge
screw is removed prior to machining. The set torque value for clamping screw is 2.0 N•m.
a W
hen using a square type holder:
When installing the boring bar into the holder, tighten the clamp screws after ensuring the flats on
a Fig.3
the tool holder are parallel to the reference flats on the micro-mini bar. Refer to fig.3.
Make sure that the clamping screws are tightened to the recommended values.
s
Do not tighten the clamp screw without a bar in place, otherwise the bridge will be deformed.
d Insert The Reference Plane
of Square Type Holder
Tighten the clamping screw ensuring making the micro-mini twin
boring bars in contact with the reference plane of square type holder.
581
GROOVING
DCON
BD
BD
10
x c z 10 x c
z S3
v LF
20
LF
RBH158ppN, RBH16ppN,
RBH22ppN has a temporary set screw for different machine specifications. RBH190ppN
(Represented by number 4)
582
GROOVING
Stock
Order Number Wrench
Torque
DCON DCB BD LF S1 S2 S3 C CG z x c v (N • m)
GROOVING
RBH1970N RBH19070N
10 (Clamp)
20
L24 100
10
10
Dimensions (mm)
MICRO-MINI TWIN CG MICRO-MINI TWIN Torque
Order Number Stock Clamp Screw Wrench
(N • m)
B WF Width of Cutting
L24
*
Width of Cutting
CG
* L24 is the length of overhang for sufficient clamping, and ( ) is the recommended length for machining of carbon and alloy steel.
a : Inventory maintained in Japan.
583
GROOVING
FSL51/52
Spare Parts >> 1927 Technical Info >> 1971
Product Information ISO13399 Property >> 1966
WF
WF
2° 2° 2° 2°
CW H
10° LU CW H
LF DCON 5° LU
LF DCON
Max. *2
Stock Insert Number Dimensions(mm) Groove
Order Number Depth
R Grooving Threading DCON LF LU WF H CW
1
* Clamp
DMIN (mm) Screw Wrench
GROOVING
WF
2° 2° 2° 2°
CW H
10° LU CW H
LF DCON 5° LU
LF DCON
Max. *2
Stock Insert Number Dimensions(mm) Groove
Order Number Depth
R Grooving Threading DCON LF LU WF H CW
1
* Clamp
DMIN (mm) Screw Wrench
584
GROOVING
INSERTS
Coated Carbide Dimensions(mm)
Application
CW
UP20M
UTi20T
and pitch Order Number Geometry
(mm) L W1 CDX S RE BCH
CW ±0.025
1.5 MLG1015L a 7 5 1 2.38 ─ 0.1
CDX
2 MLG1020L a 7 5 1 2.38 ─ 0.1
2°
BCH
S
BCH
2°
L
15°
W1
Grooving
CW ±0.025
2 MLG1420L a 11.8 6.5 2 4.76 ─ 0.1 CDX
3 MLG1430L 11.8 6.5 2 4.76 ─ 0.1
2°
a
BCH
GROOVING
2 MLG2020L a 16.8 9.03 3 6.35 ─ 0.1
BCH
2°
3 MLG2030L a 16.8 9.03 3 6.35 ─ 0.1
L
20°
4 MLG2040L a 16.8 9.03 3 6.35 ─ 0.1
W1
Pitch 1.5 ─ 2.0 MLT1001L a a 7 5 ─ 2.38 0.1 ─ MLT
Pitch 1.5 ─ 2.5 MLT1401L a a 11.8 6.5 ─ 4.76 0.1 ─
Pitch 1.5 ─ 3.5 MLT2001L 16.8 9.03 ─ 6.35 0.1 ─
60°
a a
S
Threading
RE
L
15°
W1
a : Inventory maintained in Japan.
(10 inserts in one case)
P Carbon Steel 180 ─ 280HB UP20M • UTi20T 90 (60 ─ 120) 0.05 (0.02 ─ 0.08) 0.05 (0.02 ─ 0.08) 0.05 (0.02 ─ 0.08) 0.05 (0.02 ─ 0.08)
Alloy Steel 280 ─ 350HB UP20M • UTi20T 80 (50 ─ 100) 0.03 (0.02 ─ 0.04) 0.03 (0.02 ─ 0.04) 0.03 (0.02 ─ 0.04) 0.03 (0.02 ─ 0.04)
585
GROOVING
DCON
WF
(Max. Groove Width) 4.7
LF
*2
Stock Dimensions(mm)
Order Number Insert Number
Dimensions (mm)
Stock
Order Head
Set Bolt Wrench
Number DCON LF H OAL Order Number
y Relationship between prepared hole and groove depth for DPT4 type
ap
øD1
5.0 CW
4.0
Insert :
MGTR/L43250-43470 (CW=2.5─4.7) Range of grooving
Groove Depth ap (mm)
3.0
Insert :
MGTR/L43150-43230 (CW=1.5─2.3) Range of grooving
2.0
586
GROOVING
INSERTS
Stock Dimensions(mm)
Coated Cermet Carbide
Order Number Geometry
VP20MF
NX2525
CW CDX IC S RER/L
UTi20T
MGTL43125 a a a 1.25 1.2 12.7 4.76 0.2 MGTL...
MGTL43145 a a a 1.45 1.5 12.7 4.76 0.2
MGTL43150 a a a 1.5 3.0 12.7 4.76 0.2
MGTL43175 a a a 1.75 3.0 12.7 4.76 0.2
MGTL43200 a a a 2 3.0 12.7 4.76 0.2
MGTL43230 a a a 2.3 3.0 12.7 4.76 0.2
MGTL43250 a a a 2.5 4.5 12.7 4.76 0.3
CW ±0.025
MGTL43260 a a 2.6 4.5 12.7 4.76 0.3 CDX
RER
MGTL43270 a a 2.7 4.5 12.7 4.76 0.3
S
MGTL43280 a a a 2.8 4.5 12.7 4.76 0.3
GROOVING
REL
MGTL43300 a a a 3 4.5 12.7 4.76 0.3
MGTL43320 3.2 4.5 12.7 4.76 0.3
IC
a
587
588
TURNING TOOLS
THREADING
CROSS REFERENCE THREAD PITCH MTH/MT1.................................. 609
(EXTERNAL) ................................ 590 SMG ............................................ 611
CROSS REFERENCE THREAD PITCH SMG ......................................... 611
(INTERNAL) ................................. 592 INTERNAL THREADING................... 614
CROSS REFERENCE THREAD PITCH 594 MMT ............................................ 614
FEATURES OF MMT SERIES .............. 594 MMTI ........................................ 614
........................................................... 596 CT-RS .......................................... 619
STANDARD OF THREADING TOOLS .. 604 CT-RS....................................... 619
EXTERNAL THREADING ................. 604 FSL51/52 ..................................... 623
MMT ............................................ 604 FSL51/52 .................................. 623
MMTE....................................... 604 DPT2 ........................................... 626
MT ............................................... 609 DPT2 ........................................ 626
589
THREADING
Partial Profile Partial Profile ISO Metric American Parallel American Taper Pipe Am
60° 55° UN Pipe Thread NPT Thread N
BSPT
Whitworth
for BSW, BSP
Type 1/8P 1/8P
RE=0.137P
60° 55° 30° 30°
60° 60°
55°
1°47'
1/4P 1/4P
RE=0.137P
°
90
M G(PF) R(PT)
UNC
Symbol UNC W M Rp(PS) NPT Rc(PT) N
UNF Rp
UNF W
MT Holder
Partial 0.25 ─ 4.5
20 ─ 9 0.25 ─ 4.5 64 ─ 6 ─ ─ ─
form (64 ─ 6)
^ 609
SMG Holder
Partial 0.25 ─ 2.0
─ 0.25 ─ 2.0 48 ─ 13 ─ ─ ─
form (48 ─ 13)
^ 611
590
THREADING
el American Taper Pipe American Round ISO American UNJ API Buttress API Round
read NPT Thread NPTF DIN 405 Trapezoidal ACME Casing Casing&Tubing
BSPT 30°
orth
BSP
RE=0.22105P
RE=0.137P 1/8P
RE=0.25597P
27.5°27.5° 30° 30° 30° 30° 29°
60° 30° 30°
1°47'
1°47'
1°47'
°
1°47'
90 RE=0.23851P 0.366P 0.3707P 10° 3°
°
°
RE=0.18042P
90
90
RE=0.137P
90°
) R(PT)
Tr ACME CSG
S) NPT Rc(PT) NPTF Rd (TM) (Tw) UNJ BCSG
Rp LCSG
THREADING
─ ─ ─ ─ ─ ─ ─ ─ ─
─ ─ ─ ─ ─ ─ ─ ─ ─
─ ─ ─ ─ ─ ─ ─ ─ ─
591
THREADING
Partial Profile Partial Profile ISO Metric American Parallel American Taper Pipe Am
60° 55° UN Pipe Thread NPT Thread N
BSPT
Whitworth
for BSW, BSP
Type 1/8P 1/8P
RE=0.137P
60° 55° 30° 30°
60° 60°
55°
1°47'
1/4P 1/4P
RE=0.137P
°
90
M G(PF) R(PT)
UNC
Symbol UNC W M Rp(PS) NPT Rc(PT) N
UNF
UNF W Rp
MMT Full
form
─ ─ 0.5 ─ 5.0 32 ─ 5 28 ─ 5
27, 18, 14
19, 14, 11 14,
Boring Bars 11.5, 8
THREADING
FSL5
Boring Bars Partial 1.5 ─ 3.5
─ 1.5 ─ 3.5 16 ─ 8 ─ ─ ─
form (16 ─ 8)
^ 623
DPT2
Boring Partial 0.25 ─ 4.5
Head ─ 0.25 ─ 4.5 64 ─ 6 ─ ─ ─
form (64─ 6)
^ 626
MICRO-MINI
TWIN Partial 0.5 ─ 1.75
─ 0.5 ─ 1.75 36 ─ 16 ─ ─ ─
form (36 ─ 16)
^ 619
592
THREADING
el American Taper Pipe American Round ISO American UNJ API Buttress API Round
read NPT Thread NPTF DIN 405 Trapezoidal ACME Casing Casing&Tubing
BSPT 30°
orth
BSP
RE=0.22105P
RE=0.137P RE=0.25597P 1/8P
1°47'
°
1°47'
90 RE=0.23851P 0.366P 0.3707P 10° 3°
°
°
RE=0.18042P
90
90
RE=0.137P
90°
) R(PT)
Tr ACME CSG
S) NPT Rc(PT) NPTF Rd (TM) (Tw) UNJ BCSG
LCSG
Rp
THREADING
─ ─ ─ ─ ─ ─ * ─ ─ ─
─ ─ ─ ─ ─ ─ ─ ─ ─
─ ─ ─ ─ ─ ─ ─ ─ ─
─ ─ ─ ─ ─ ─ ─ ─ ─
* When machining an internal UNJ thread, cut an internal hole with the appropriate diameter. Then machine with 60° American UN.
In this case, a full form type insert cannot be used.
593
THREADING
M UNC UNF W
F G
G Rp NPT R Rd CSG LCS
Rc NPT
M UNC UNF W
G Rp R Rc
Tr E G
ACM BCS
THREADING
y IDEAL CHIP CONTROL EVEN IN THE LATTER HALF OF PASSES WHEN CONTINUOUS CHIPS
ARE USUALLY PRODUCED. (M-CLASS INSERTS WITH 3-D CHIP BREAKERS)
ISO metric external thread pitch 1.5mm Final pass (6th pass)
Competitor MMT
<Cutting Conditions>
Workpiece : JIS SCM440
Insert : MMT16ER150ISO-S
Grade : VP15TF
Cutting speed : 120m/min
Cutting method : Radial Infeed
Depth of cut : Fixed cut area
Pass : 6 times
Coolant : Wet
American UN 2A / 2B
Theoretical MMT series
thread profile Whitworth for BSW, BSP Medium Class A
American ACME 3G
UNJ 3A
594
THREADING
THREADING
─ 1.5° ─ 3°
─ 0.5° ─ 2°
Insert
Inclination 0.5° ─ 1°
Angle Shim 1.5° 0°
('°)
2.5° 1°
3.5° 2°
By changing only the shim, MMT holders can be used for turning of threads
with various lead angles as well as the turning of left hand threads. 4.5° 3°
Standard shim delivered with the
holder.
y GRADE
VP15TF (G-class ground insert, M-class insert with 3-D chip breakers)
a Wide versatility
• High fracture resistance during low rigidity applications such as bar feed machining. Able to withstand harsh conditions for long
periods where conventional inserts would be liable to breakage.
• Effective combination of high cost performance M-class inserts with 3-D chip breakers.
595
THREADING
4 < & 13.2 & 13.2 ─ &18.2 &18.2 ─ & 24.3 & 24.3 ─ & 36.5 & 36.5 ─ & 72.9 > & 72.9 < & 29.2 & 29.2 ─ &72.9 > &72.9
4.5 < & 14.9 & 14.9 ─ &20.5 &20.5 ─ & 27.3 & 27.3 ─ & 41.0 & 41.0 ─ & 82.1 > & 82.1 < & 32.8 & 32.8 ─ &82.1 > &82.1
5 < & 16.5 & 16.5 ─ &22.8 &22.8 ─ & 30.4 & 30.4 ─ & 45.6 & 45.6 ─ & 91.2 > & 91.2 < & 36.5 & 36.5 ─ &91.2 > &91.2
(Note) Back turning in the case of left hand threads.
y SHIM REFERENCE GRAPH (Thread angle 60˚ and 55˚)
Right Hand Thread Left Hand Thread
%=4.5° %=3.5° % : Lead Angle % : Lead Angle
%=2.5°
Threading Pitch (thread/inch)
(Note) When a thread lead angle < the tool flank angle, change the shim to prevent side interference with the insert.
(Refer to the table below for the calculation of thread lead angle and tool flank angle.)
y SHIM REFERENCE TABLE (THREADING DIAMETER) (Thread angle 30˚ and 29˚)
Lead
Angle Right Hand Thread (mm) Left Hand Thread (mm)
Pitch Threading Threading
(mm) impossible 4.5° 3.5° 2.5° 1.5° 0.5° impossible ─ 1 .5° ─ 0 .5°
0.5 < & 1.8 & 1.8 ─ & 2.3 &2.3 ─ & 3.0 & 3.0 ─ & 4.6 & 4.6 ─ & 9.1 > & 9.1 < & 4.6 & 4.6 ─ &9.1 > &9.1
0.75 < & 2.7 & 2.7 ─ & 3.4 &3.4 ─ & 4.6 & 4.6 ─ & 6.8 &6. 8 ─ & 13.7 > & 13.7 < & 6.8 &6. 8 ─ &13.7 > &13.7
1 < & 3.6 & 3.6 ─ & 4.6 &4.6 ─ & 6.1 & 6.1 ─ & 9.1 & 9.1 ─ & 18.2 > & 18.2 < & 9.1 & 9.1 ─ &18.2 > &18.2
1.25 < & 4.5 & 4.5 ─ & 5.7 &5.7 ─ & 7.6 & 7.6 ─ & 11.4 & 11.4 ─ & 22.8 > & 22.8 < & 11.4 & 11.4 ─ &22.8 > &22.8
1.5 < & 5.5 & 5.5 ─ & 6.8 &6.8 ─ & 9.1 & 9.1 ─ & 13.7 & 13.7 ─ & 27.4 > & 27.4 < & 13.7 & 13.7 ─ &27.4 > &27.4
1.75 < & 6.4 & 6.4 ─ & 8.0 &8.0 ─ & 10.6 & 10.6 ─ & 16.0 & 16.0 ─ & 31.9 > & 31.9 < & 16.0 & 16.0 ─ &31.9 > &31.9
2 < & 7.3 & 7.3 ─ & 9.1 &9.1 ─ & 12.1 & 12.1 ─ & 18.2 & 18.2 ─ & 36.5 > & 36.5 < & 18.2 & 18.2 ─ &36.5 > &36.5
2.5 < & 9.1 & 9.1 ─ & 11.4 &11.4 ─ & 15.2 & 15.2 ─ & 22.8 & 22.8 ─ & 45.6 > & 45.6 < & 22.8 & 22.8 ─ &45.6 > &45.6
3 < & 10.9 &10.9 ─ & 13.7 &13.7 ─ & 18.2 & 18.2 ─ & 27.3 & 27.3 ─ & 54.7 > & 54.7 < & 27.3 & 27.3 ─ &54.7 > &54.7
3.5 < & 12.7 & 12.7 ─ &15.9 &15.9 ─ & 21.3 & 21.3 ─ & 31.9 & 31.9 ─ & 63.8 > & 63.8 < & 31.9 & 31.9 ─ &63.8 > &63.8
4 < & 14.6 & 14.6 ─ &18.2 &18.2 ─ & 24.3 & 24.3 ─ & 36.5 & 36.5 ─ & 72.9 > & 72.9 < & 36.5 & 36.5 ─ &72.9 > &72.9
4.5 < & 16.4 & 16.4 ─ &20.5 &20.5 ─ & 27.3 & 27.3 ─ & 41.0 & 41.0 ─ & 82.1 > & 82.1 < & 41.0 & 41.0 ─ &82.1 > &82.1
5 < & 18.2 & 18.2 ─ &22.8 &22.8 ─ & 30.4 & 30.4 ─ & 45.6 & 45.6 ─ & 91.2 > & 91.2 < & 45.6 & 45.6 ─ &91.2 > &91.2
(Note) Back turning in the case of left hand threads.
596
THREADING
(Note) When a thread lead angle < the tool flank angle, change the shim to prevent side interference with the insert.
(Refer to the table below for the calculation of thread lead angle and tool flank angle.)
y Selection table
Lead Opening angle 60°/55° Opening angle 60°/55° Opening angle 30°/29° Opening angle 30°/29°
Angle Right Hand Thread Left Hand Thread Right Hand Thread Left Hand Thread
0 P05 P05 N05 N05 P05 P05 N05 N05
THREADING
0.5 P05 P05 N05 N05 P05 P05 N05 N05
1 P15 P15 N15 N15 P15 P15 N15 N15
1.5 P15 P15 N15 N15 P15 P15 N15 N15
2 P25 P25 N15 N15 P25 P25 Compatible Compatible
2.5 P25 P25 Compatible Compatible P25 P25 Compatible Compatible
3 P35 P35 Compatible Compatible P35 P35 Compatible Compatible
3.5 P35 P35 Compatible Compatible P35 P35 Compatible Compatible
4 P45 P45 Compatible Compatible P45 P45 Compatible Compatible
4.5 P45 P45 Compatible Compatible P45 P45 Compatible Compatible
5 P45 P45 Compatible Compatible Compatible Compatible Compatible Compatible
5.5 Compatible Compatible Compatible Compatible Compatible Compatible Compatible Compatible
(Note) Back turning in the case of left hand threads.
When replacing a shim, check if the difference between the y CALCULATION OF THREAD LEAD ANGLE
thread lead angle and shim inclination angle is within:
2.5° ─ 0.5° where thread helix angle is 60° (55°) % : Lead angle
2° ─ 1° where thread helix angle is 30° (29°) I nP I : Lead
tan% = = n : Number of threads
* Inclination angle of a standard shim is 0°. )d )d P : Pitch
* The holder has a 1.5° lead angle.
d : Effective diameter of thread
* http://www.carbide.mht.co.th/technical_information/tec_turning_tools/tec_threading
Refer to the web catalogue.
597
THREADING
y American UN
Pitch Total Number of Passes Insert Type
(thread/ Cutting M-class inserts with
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 G-class ground inserts
3-D chip breakers
32 0.49 0.17 0.15 0.11 0.06 MMT16ER320UN ─
28 0.56 0.17 0.14 0.10 0.09 0.06 MMT16ER280UN ─
24 0.65 0.18 0.16 0.14 0.11 0.06 MMT16ER240UN ─
THREADING
y BSPT
Pitch Total Number of Passes Insert Type
(thread/ Cutting M-class inserts with
inch) Depth 1 2 3 4 5 6 7 8 9 G-class ground inserts
3-D chip breakers
28 0.58 0.17 0.14 0.11 0.10 0.06 MMT16ER280BSPT ─
19 0.86 0.22 0.19 0.15 0.12 0.12 0.06 MMT16ER190BSPT MMT16ER190BSPT-S
14 1.16 0.24 0.20 0.17 0.14 0.12 0.12 0.11 0.06 MMT16ER140BSPT MMT16ER140BSPT-S
11 1.48 0.25 0.23 0.21 0.18 0.16 0.14 0.13 0.12 0.06 MMT16ER110BSPT MMT16ER110BSPT-S
(Note) • Set the finishing allowance on a diameter at approx. 0.1mm when using a full form insert.
• Please note the cutting depth and the number of passes when a corner radius of a partial form insert or of an internal threading
insert is small to prevent damage to the insert corner.
• Please set the cutting depth sufficiently deep enough on materials such as hardened steel or austenitic stainless steel to help
prevent premature wear and chipping caused by the outer layer of the material.
598
THREADING
y American ACME
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14
12 1.19 0.27 0.23 0.20 0.17 0.14 0.12 0.06 MMT16ER120ACME
10 1.52 0.29 0.25 0.21 0.18 0.16 0.14 0.12 0.11 0.06 MMT16ER100ACME
8 1.84 0.30 0.26 0.22 0.19 0.16 0.15 0.14 0.13 0.12 0.11 0.06 MMT16ER080ACME
6 2.37 0.34 0.30 0.27 0.24 0.21 0.19 0.16 0.14 0.12 0.12 0.11 0.11 0.06 MMT22ER060ACME
5 2.79 0.36 0.33 0.30 0.26 0.23 0.20 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.06 MMT22ER050ACME
THREADING
y UNJ
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11
32 0.46 0.16 0.14 0.10 0.06 MMT16ER320UNJ
28 0.52 0.16 0.12 0.09 0.09 0.06 MMT16ER280UNJ
24 0.61 0.17 0.14 0.14 0.10 0.06 MMT16ER240UNJ
20 0.73 0.19 0.16 0.13 0.10 0.09 0.06 MMT16ER200UNJ
18 0.81 0.23 0.18 0.14 0.10 0.10 0.06 MMT16ER180UNJ
16 0.92 0.26 0.21 0.14 0.12 0.10 0.09 MMT16ER160UNJ
14 1.05 0.26 0.23 0.17 0.12 0.11 0.10 0.06 MMT16ER140UNJ
12 1.22 0.28 0.27 0.20 0.17 0.13 0.11 0.06 MMT16ER120UNJ
10 1.47 0.30 0.29 0.21 0.15 0.13 0.12 0.11 0.10 0.06 MMT16ER100UNJ
8 1.83 0.31 0.30 0.23 0.18 0.15 0.14 0.13 0.12 0.11 0.10 0.06 MMT16ER080UNJ
y American NPT
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
27 0.66 0.15 0.13 0.12 0.11 0.09 0.06 MMT16ER270NPT
18 1.01 0.20 0.16 0.14 0.13 0.12 0.11 0.09 0.06 MMT16ER180NPT
14 1.33 0.23 0.19 0.16 0.14 0.13 0.12 0.11 0.10 0.09 0.06 MMT16ER140NPT
11.5 1.64 0.24 0.19 0.17 0.15 0.15 0.13 0.13 0.12 0.11 0.10 0.09 0.06 MMT16ER115NPT
8 2.42 0.33 0.28 0.23 0.20 0.18 0.16 0.15 0.14 0.13 0.12 0.12 0.11 0.11 0.10 0.06 MMT16ER080NPT
y American NPTF
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
27 0.64 0.16 0.14 0.11 0.09 0.08 0.06 MMT16ER270NPTF
18 1.00 0.19 0.16 0.14 0.13 0.12 0.11 0.09 0.06 MMT16ER180NPTF
14 1.35 0.23 0.21 0.16 0.14 0.13 0.12 0.11 0.10 0.09 0.06 MMT16ER140NPTF
11.5 1.63 0.24 0.23 0.19 0.15 0.13 0.11 0.11 0.11 0.10 0.10 0.10 0.06 MMT16ER115NPTF
8 2.38 0.32 0.27 0.23 0.19 0.17 0.16 0.15 0.14 0.13 0.12 0.12 0.11 0.11 0.10 0.06 MMT16ER080NPTF
(Note) • Set the finishing allowance on a diameter at approx. 0.1mm when using a full form insert.
• Please note the cutting depth and the number of passes when a corner radius of a partial form insert or of an internal threading
insert is small to prevent damage to the insert corner.
• Please set the cutting depth sufficiently deep enough on materials such as hardened steel or austenitic stainless steel to help
prevent premature wear and chipping caused by the outer layer of the material.
599
THREADING
y American UN
Pitch Total Number of Passes Insert Type
(thread/ Cutting M-class inserts with
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 G-class ground inserts
THREADING
(Note) • Set the finishing allowance on a diameter at approx. 0.1mm when using a full form insert.
• Please note the cutting depth and the number of passes when a corner radius of a partial form insert or of an internal threading
insert is small to prevent damage to the insert corner.
• Please set the cutting depth sufficiently deep enough on materials such as hardened steel or austenitic stainless steel to help
prevent premature wear and chipping caused by the outer layer of the material.
600
THREADING
THREADING
4 2.25 0.33 0.32 0.24 0.22 0.21 0.17 0.16 0.15 0.14 0.13 0.12 0.06 MMT22IR400TR
5 2.75 0.35 0.32 0.26 0.24 0.22 0.21 0.19 0.19 0.17 0.15 0.14 0.13 0.12 0.06 MMT22IR500TR
y American ACME
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14
12 1.19 0.27 0.23 0.20 0.17 0.14 0.12 0.06 MMT16IR120ACME
10 1.52 0.29 0.25 0.21 0.18 0.16 0.14 0.12 0.11 0.06 MMT16IR100ACME
8 1.84 0.30 0.26 0.22 0.19 0.16 0.15 0.14 0.13 0.12 0.11 0.06 MMT16IR080ACME
6 2.37 0.34 0.30 0.27 0.24 0.21 0.19 0.16 0.14 0.12 0.12 0.11 0.11 0.06 MMT22IR060ACME
5 2.79 0.36 0.33 0.30 0.26 0.23 0.20 0.18 0.17 0.16 0.15 0.14 0.13 0.12 0.06 MMT22IR050ACME
y American NPT
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
27 0.66 0.15 0.13 0.12 0.11 0.09 0.06 MMT16IR270NPT
18 1.01 0.20 0.16 0.14 0.13 0.12 0.11 0.09 0.06 MMT16IR180NPT
14 1.33 0.23 0.19 0.16 0.14 0.13 0.12 0.11 0.10 0.09 0.06 MMT16IR140NPT
11.5 1.64 0.24 0.19 0.17 0.15 0.15 0.13 0.13 0.12 0.11 0.10 0.09 0.06 MMT16IR115NPT
8 2.42 0.33 0.28 0.23 0.20 0.18 0.16 0.15 0.14 0.13 0.12 0.12 0.11 0.11 0.10 0.06 MMT16IR080NPT
y American NPTF
Pitch Total Number of Passes
(thread/ Cutting Insert Type
inch) Depth 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
14 1.35 0.23 0.21 0.16 0.14 0.13 0.12 0.11 0.10 0.09 0.06 MMT16IR140NPTF
11.5 1.63 0.24 0.23 0.19 0.15 0.13 0.11 0.11 0.11 0.10 0.10 0.10 0.06 MMT16IR115NPTF
8 2.38 0.32 0.27 0.23 0.19 0.17 0.16 0.15 0.14 0.13 0.12 0.12 0.11 0.11 0.10 0.06 MMT16IR080NPTF
(Note) • Set the finishing allowance on a diameter at approx. 0.1mm when using a full form insert.
• Please note the cutting depth and the number of passes when a corner radius of a partial form insert or of an internal threading
insert is small to prevent damage to the insert corner.
• Please set the cutting depth sufficiently deep enough on materials such as hardened steel or austenitic stainless steel to help
prevent premature wear and chipping caused by the outer layer of the material.
601
THREADING
IDENTIFICATION
MMT E R 12 12 H 16 C
Designation Application Hand of Tool Tool Size (mm) Tool Length Insert Size Method of
E External R Right (Height and Width) (mm) (mm) Holding
12 12 H 100 16 9.525 C Clamp-on
16 16 K 125 22 12.7
20 20 M 150
25 25 P 170
32 32
MMT I R 13 16 A K 11 S P15
Designation Application Min.Cutting Diameter (mm) Tool Length (mm) Insert Size Lead Angle
I Internal K 125 R 200 (mm) Method of P15 1.5°
Shank Diameter (mm)
M 150 S 250 11 6.35 Holding P25 2.5°
Hand of Tool Shank Material Q 180 T 300 16 9.525 S Screw-on P35 3.5°
R Right Steel Shank with 22 12.7 C Clamp-on
A Coolant Hole
THREADING
IDENTIFICATION
602
Memo
Memo
603
THREADING
Product Information Technical Info >> 1981 ISO13399 Property >> 1966
PDX
WF
WF
B
1.5° PDY
LH
A LF LF
Refer to the insert standards
10°
for dimensions PDX and PDY.
HF
H
Right hand tool holder only.
* * z
Stock
Dimensions (mm)
Order Number Insert Number x
R H B LF LH HF WF Clamp Clamp Stop Shim Screw Shim Wrench