Professional Documents
Culture Documents
Control -
Loading Area Weighing Area Feed Out Console
Motor SYSTEM T 3
Process
Control
ÍÎ
Belt Tension - The primary problem when weighing in belt conveyors
When idlers in the weighing area are not aligned, the Thus imperfect alignment, dirt on rollers and varying belt
sensed load is influenced by belt tension. If the weighing tension generally causes the dominant belt weighing
roller is lower, the belt tension S causes a lifting force u . errors. A low, constant belt tension is always desirable.
The sensed weight is P - u, not the material weight. With low belt tension the belt tare weight distributes evenly
Usually the belt tension S is about ten times the load P to on all of the rollers and the lifting force u is minimized.
avoid belt slip, making idler alignment very crucial.
u
S u S
S S.E.G INSTRUMENT AB
S S.E.G INSTRUMENT AB
P P
Sf+
Sm+ Sm+
Sf
Sf- Sm-
Sm- So
M M So
S-E-G INSTRUMENT AB
Continuous Blending
Flow Control
Totalizing
S-E-G INSTRUMENT AB
Box 111 43 Telefon Telefax Internet
161 11 Bromma +46-8-764 74 00 +46-8-764 75 00 www.s-e-g.com
Sweden