Professional Documents
Culture Documents
Please read this manual carefully before operating your set and retain it for future reference.
ESPAÑOL Guía Rápida de Configuración 43UF6900 43UF690T
Lea atentamente este manual antes de poner en marcha el equipo y consérvelo para futuras consultas. 49UF6900 49UF690T
AA
X4
(M4 x L14)
www.lg.com
?
1 1 2
3 4
2 ENGLISH
ESPAÑOL
Image shown may differ from your TV.
La imagen puede ser diferente a la de su televisor.
A
A
B
B
OPTICAL
DIGITAL
AUDIO OUT
SVC ONLY LAN AUDIO OUT/
H/P OUT
PC-AUDIO IN
CABLE ANTENNA
IN IN
4 1 2
3 4
ENGLISH 43UF6900 49UF6900
(43UF6900-SC) (49UF6900-SC)
43UF6900 49UF6900
MODELS (43UF6900-SD) (49UF6900-SD)
43UF690T 49UF690T
(43UF690T-DC) (49UF690T-DC)
With stand (mm) 971 x 624 x 198 1,103 x 698 x 198
Dimensions (W x H x D)
Without stand (mm) 971 x 575 x 39.9 1,103 x 650 x 39.9
With stand (kg) 11.0 14.7
Weight
Without stand (kg) 10.7 14.4
Power requirement AC 100 - 240 V ~ 50 / 60 Hz
Current value / Power consumption 0.9 A / 90 W 1.1 A / 110 W
Please read this manual carefully before operating your TV and retain
it for future reference.
43UF6800 43UF6900 40UF7700 60UF7700 49UF8500 55UF9500
49UF6800 49UF6900 43UF7700 65UF7700 55UF8500 65UF9500
55UF6800 49UF7700 70UF7700 60UF8500 55UG8700
65UF6800 55UF7700 79UF7700 65UF8500 65UG8700
*MFL68741512* www.lg.com
P/NO : MFL68741512 (1503-REV02)
Important Safety Instructions Read these instructions.
Keep these instructions.
Always comply with the following precautions Heed all warnings.
to avoid dangerous situations and ensure peak Follow all instructions.
performance of your product.
••Do not use this apparatus near water.
WARNING/CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK ••Clean only with a dry cloth.
DO NOT REMOVE COVER (OR BACK). NO
USER SERVICEABLE PARTS INSIDE. REFER TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is ••Do not block any ventilation openings. Install in
intended to alert the user to the presence of accordance with the manufacturer’s instructions.
uninsulated dangerous voltage within the
product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock
to persons.
The exclamation point within an ••Do not install near any heat sources such
equilateral triangle is intended to alert the as radiators, heat registers, stoves, or other
user to the presence of important operating apparatus (including amplifiers) that produce
and maintenance (servicing) instructions in heat.
the literature accompanying the appliance.
ENGLISH
WARNING/CAUTION
- TO REDUCE THE RISK OF FIRE AND ELECTRIC
SHOCK, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE. ••Do not defeat the safety purpose of the
polarized or grounding-type plug. A polarized
WARNING plug has two blades with one wider than the
If you ignore the warning message, you may other. A grounding type plug has two blades
be seriously injured or there is a possibility of and a third grounding prong. The wide blade or
accident or death. the third prong are provided for your safety. If
the provided plug does not fit into your outlet,
CAUTION consult an electrician for replacement of the
obsolete outlet (Can differ by country).
If you ignore the caution message, you may
be slightly injured or the product may be
damaged.
NOTE
The note helps you understand and use the ••Protect the power cord from being walked on
product safely. Please read the note carefully or pinched particularly at plugs, convenience
before using the product. receptacles, and the point where they exit from
the apparatus.
2
••Use only with a cart, stand, tripod, bracket, or ••CAUTION concerning the Power Cord
table specified by the manufacturer, or sold with (Can differ by country):
the apparatus. When a cart is used, use caution Check the specification page of this owner’s
when moving the cart/apparatus combination to manual to be certain. Do not connect too many
avoid injury from tip-over. appliances to the same AC power outlet as this
could result in fire or electric shock. Do not
overload wall outlets. Overloaded wall outlets,
loose or damaged wall outlets, extension cords,
frayed power cords, or damaged or cracked
••Unplug this apparatus during lightning storms wire insulation are dangerous. Any of these
or when unused for long periods of time. conditions could result in electric shock or fire.
Periodically examine the cord of your appliance,
and if its appearance indicates damage or
deterioration, unplug it, discontinue use of the
appliance, and have the cord replaced with
an exact replacement part by an authorized
••Refer all servicing to qualified service personnel. service. Protect the power cord from physical or
Servicing is required when the apparatus has mechanical abuse, such as being twisted, kinked,
been damaged in any way, such as power-supply pinched, closed in a door, or walked upon. Pay
cord or plug is damaged, liquid has been spilled, particular attention to plugs, wall outlets, and
objects have fallen into the apparatus, the the point where the cord exits the appliance. Do
apparatus has been exposed to rain or moisture, not move the TV with the power cord plugged
does not operate normally, or has been dropped. in. Do not use a damaged or loose power cord.
Be sure do grasp the plug when unplugging the
power cord. Do not pull on the power cord to
unplug the TV.
ENGLISH
••Do not press strongly upon the panel with a
hand or a sharp object such as a nail, pencil, or
pen, or make a scratch on it. ••Warning - To reduce the risk of fire or electrical
shock, do not expose this product to rain,
moisture or other liquids. Do not touch the TV
with wet hands. Do not install this product near
flammable objects such as gasoline or candles,
••Do not stick metal objects or any other or expose the TV to direct air conditioning.
conductive material into the power cord. Do
not touch the end of the power cord while it is
plugged in.
••Keep the packing anti-moisture material or
vinyl packing out of the reach of children. ••Do not expose to dripping or splashing and
Anti-moisture material is harmful if swallowed. do not place objects filled with liquids, such as
If swallowed, induce vomiting and go to the vases, cups, etc. on or over the apparatus (e.g.,
nearest hospital. Additionally, vinyl packing can on shelves above the unit).
cause suffocation. Keep it out of the reach of
children.
3
••Grounding ••Cleaning
(Except for devices which are not grounded.) When cleaning, unplug the power cord and wipe
Ensure that you connect the earth ground wire gently with a soft cloth to prevent scratching. Do
to prevent possible electric shock (i.e., a TV not spray water or other liquids directly on the
with a three-prong grounded AC plug must TV as electric shock may occur. Do not clean with
be connected to a three-prong grounded AC chemicals such as alcohol, thinners, or benzene.
outlet). ••Moving
If grounding methods are not possible, have Make sure the product is turned off, unplugged,
a qualified electrician install a separate circuit and all cables have been removed. It may take 2
breaker. Do not try to ground the unit by or more people to carry larger TVs. Do not press
connecting it to telephone wires, lightning rods, or put stress on the front panel of the TV.
or gas pipes. ••Ventilation
Install your TV where there is proper ventilation.
Power
Do not install in a confined space such as a
Circuit
Supply bookcase. Do not cover the product with cloth or
Breaker
other materials while plugged in. Do not install
••As long as this unit is connected to the AC wall in excessively dusty places.
outlet, it is not disconnected from the AC power ••If you smell smoke or other odors coming from
source even if the unit is turned off. the TV, unplug the power cord and contact an
••Do not attempt to modify this product in any authorized service center.
way without written authorization from LG ••Keep the product away from direct sunlight.
Electronics. Unauthorized modification could ••Never touch this apparatus or antenna during a
void the user’s authority to operate this product. lightning storm.
••Outdoor Antenna Grounding ••When mounting a TV on the wall, make sure not
(Can differ by country): to install the TV by hanging the power and signal
If an outdoor antenna is installed, follow the cables on the back of the TV.
precautions below. An outdoor antenna system ••Do not allow an impact shock or any objects to
ENGLISH
should not be located in the vicinity of overhead fall into the product, and do not drop anything
power lines or other electric light or power onto the screen.
circuits, or where it can come in contact with ••DISCONNECTING THE DEVICE FROM THE
such power lines or circuits as death or serious MAIN POWER
injury can occur. Be sure the antenna system is The power plug is the disconnecting device.
grounded to provide some protection against In case of an emergency, the power plug must
voltage surges and built-up static charges. remain readily accessible.
Section 810 of the National Electrical Code (NEC) ••Batteries
in the U.S.A. provides information with respect Store the accessories (battery, etc.) in a safe
to proper grounding of the mast and supporting location out of the reach of children.
structure, grounding of the lead-in wire to ••This apparatus uses batteries. In your community
an antenna discharge unit, size of grounding there might be regulations that require you
conductors, location of antenna discharge to dispose of these batteries properly due to
unit, connection to grounding electrodes, and environmental considerations. Please contact
requirements for the grounding electrode. your local authorities for disposal or recycling
Antenna grounding according to the National information.
Electrical Code, ANSI/NFPA 70 ••Do not dispose of batteries in a fire.
••Do not short circuit, disassemble, or allow the
batteries to overheat.
Antenna Lead in Wire ••Do not use high voltage electrical equipment
Antenna Discharge Unit near the TV, (e.g., a bug zapper).
Ground Clamp (NEC Section 810-20)
This may result in product malfunction.
Electric Service
Equipment
Grounding Conductor
(NEC Section 810-21) ••Dot Defect
Ground Clamp Power Service Grounding
The panel is a high technology product with
NEC: National Electrical Code
Electrode System
(NEC Art 250, Part H)
resolution of two million to six million pixels.
In a very few cases, you could see fine dots on
the screen while you’re viewing the TV. Those
dots are deactivated pixels and do not affect the
performance and reliability of the TV.
4
••Generated Sound Viewing 3D Imaging
Cracking noise A cracking noise that occurs
when watching or turning off the TV is (For 3D models)
generated by plastic thermal contraction due to
temperature and humidity. This noise is common WARNING
for products where thermal deformation is
required.
Electrical circuit humming/panel buzzing Viewing Environment
A low level noise is generated from a high- ••Viewing Time
speed switching circuit, which supplies a large - When watching 3D content, take 5 to 15 minute
amount of current to operate a product. It varies breaks every hour. Viewing 3D content for
depending upon the product. This generated a long period of time may cause headache,
sound does not affect the performance and dizziness, fatigue, or eye strain.
reliability of the product.
••Take care not to touch the ventilation openings. Those that have a photosensitive
When watching the TV for a long period, the
ventilation openings may become hot. This does seizure or chronic illness
not affect the performance of the product or ••Some users may experience a seizure or other
cause defects in the product. abnormal symptoms when they are exposed
••Do not install this product on a wall if it could be to a flashing light or particular pattern from 3D
exposed to oil or oil mist. This may damage the content.
product and cause it to fall. ••Do not watch 3D videos if you feel nauseous,
••If the TV feels cold to the touch, there may are pregnant and/ or have a chronic illness such
be a small flicker when it is turned on. This is as epilepsy, cardiac disorder, or blood pressure
normal; there is nothing wrong with TV. Some disease, etc.
minute dot defects may be visible on the screen, ••3D Content is not recommended for those who
appearing as tiny red, green, or blue spots. suffer from stereo blindness or stereo anomaly.
ENGLISH
However, they have no adverse effect on the TV’s Double images or discomfort in viewing may be
performance. Avoid touching the LCD screen or experienced.
holding your finger(s) against it for long periods ••If you have strabismus (cross-eyed), amblyopia
of time. Doing so may produce some temporary (weak eyesight), or astigmatism, you may have
distortion effects on the screen. trouble sensing depth and easily feel fatigue
due to double images. It is advised to take more
Preventing image burn or burn-in on frequent breaks than the average adult.
••If your eyesight varies between your right and
your TV screen left eye, correct your eyesight prior to watching
3D content.
5
CAUTION Preparing
Viewing Environment NOTE
••Image shown may differ from your TV.
••Viewing Distance
••Your TV’s OSD (On Screen Display) may differ
- Maintain a distance of at least twice the screen’s
slightly from that shown in this manual.
diagonal length when watching 3D content.
••The available menus and options may differ from
If you feel discomfort in viewing 3D content,
the input source or product model that you are
move further away from the TV.
using.
••New features may be added to this TV in the
Viewing Age future.
••Infants / Children ••The items supplied with your product may vary
-- Usage/ Viewing 3D content for children under depending upon the model.
the age of 5 are prohibited. ••Product specifications or contents of this manual
-- Children under the age of 10 may overreact and may be changed without prior notice due to
become overly excited because their vision is upgrade of product functions.
in development, for example, trying to touch ••For an optimal connection, HDMI cables and
the screen or trying to jump into it. Special USB devices should have bezels less than 10 mm
monitoring and extra attention is required for thick and 18 mm width.
children watching 3D content. ••Use an extension cable that supports USB 2.0 if
-- Children have greater binocular disparity of 3D the USB cable or USB flash drive does not fit into
presentations than adults because the distance your TV’s USB port.
between the eyes is shorter than one of adults. ••Use a certified cable with the HDMI logo
Therefore they will perceive more stereoscopic attached. If you do not use a certified HDMI
depth compared to adults for the same 3D cable, the screen may not display or a
image. connection error may occur.
ENGLISH
6
•• When attaching the stand to the TV set, place CAUTION
the screen facing down on a cushioned table or
flat surface to protect the screen from scratches. ••Do not push, rub, or hit the surface with your
••Make sure that the screws are fastened tightly. fingernail or a sharp object, as this may result in
(If they are not fastened securely enough, the TV scratches on the screen and image distortions.
may tilt forward after being installed.) ••Do not use any chemicals, such as waxes,
••Do not fasten the screws with excessive force benzene, alcohol, thinners, insecticides, air
otherwise they may be worn out and become fresheners, or lubricants, as these may damage
loose. the screen’s finish and cause discoloration.
••Do not spray liquid onto the surface. If water
enters the TV, it may result in fire, electric shock,
or malfunction.
Optional Extras
Optional extras can be changed or modified for Power Cord
quality improvement without any notification.
Remove the accumulated dust or dirt on the power
Contact your dealer for buying these items.
cord regularly.
These devices only work with certain models.
The model name or design may be changed due to
the manufacturer’s circumstances or policies.
(Depending upon model) Lifting and Moving the TV
AG-F*** AG-F***DP AN-VC550 When moving or lifting the TV, read the following
Cinema 3D Dual Play Smart Camera to prevent the TV from being scratched or
Glasses Glasses damaged and for safe transportation regardless of
its type and size.
AN-MR6** LG Audio
••It is recommended to move the TV in the box or
Magic Remote Device
packing material that the TV originally came in.
ENGLISH
••Before moving or lifting the TV, disconnect the
power cord and all cables.
Maintenance
••When holding the TV, the screen
should face away from you to
Cleaning Your TV avoid damage.
Clean your TV regularly to keep it at peak
performance and to extend the product’s lifespan. ••Hold the top and bottom of the TV frame firmly.
Make sure not to hold the transparent part,
CAUTION speaker, or speaker grille area.
••Before cleaning, turn the power off and
disconnect the power cord and all other cables.
••When the TV is left unattended or unused for a
long time, disconnect the power cord from the
wall outlet to prevent possible damage from
lightning or power surges.
Joystick Button 10 cm
10 cm
ENGLISH
10 cm
m
10 c
Basic Functions
When the TV is turned off, 2 Connect the power cord to a wall outlet.
place your finger on the
Power On
joystick button, press it once, CAUTION
and release it.
• Do not place the TV near or on sources of heat,
When the TV is turned on,
place your finger on the
as this may result in fire or other damage.
joystick button, press it once
Power Off for a few seconds, and release
it. All running apps will close
and any recording in progress
Securing the TV to a Wall
will stop. (optional)
If you place your finger over
(Depending upon model)
Volume the joystick button and move
Control it left or right, you can adjust
the volume level.
If you place your finger over
Channels the joystick button and move
Control it up or down, you can scroll
through the saved channels.
NOTE
• With your finger over the joystick button, move
it up, down, left, or right. Be careful not to press
the joystick button. If you press the joystick
button first, you may not be able to adjust
the volume level and/or scroll through saved
channels.
8
1 Insert and tighten the eye-bolts, or TV brackets Model 43UF6800 49/55UF6800
and bolts on the back of the TV. 43UF6900 49UF6900
- If there are bolts inserted at the eye-bolts 40/43UF7700 49/55UF7700
position, remove the bolts first. 49/55UF8500
55UF9500
2 Mount the wall brackets with the bolts to the 55UG8700
wall. Match the location of the wall bracket and VESA (A x B) 200 x 200 300 x 300
the eye-bolts on the rear of the TV. Standard screw M6 M6
3 Connect the eye-bolts and wall brackets tightly Number of screws 4 4
with a sturdy rope or cable. Make sure to keep Wall mount MSW240 MSW240
the rope parallel to the flat surface. bracket (optional) LSW240B LSW350B
Model 65UF6800 70/79UF7700
CAUTION 60/65UF7700
••Make sure that children do not climb on or hang 60/65UF8500
on the TV. 65UF9500
65UG8700
NOTE VESA (A x B) 300 x 300 600 x 400
Standard screw M6 M8
••Use a platform or cabinet that is strong and large
enough to support the TV securely. Number of screws 4 4
••Brackets, bolts, and ropes are optional. You can Wall mount
LSW350B LSW640B
obtain additional accessories from your local bracket (optional)
dealer.
A
B
Mounting on a Wall
ENGLISH
An optional wall mount can be used with your CAUTION
LG Television. Consult with your local dealer for ••Disconnect the power before moving or
a wall mount that supports the VESA standard installing the TV. Otherwise electric shock may
used by your TV model. Carefully attach the wall occur.
mount bracket at the rear of the TV. Install the wall ••Remove the stand before installing the TV on a
mount bracket on a solid wall perpendicular to the wall mount by performing the stand attachment
floor. If you are attaching the TV to other building in reverse.
materials, please contact qualified personnel to ••If you install the TV on a ceiling or slanted wall,
install the wall mount. Detailed instructions will it may fall and result in severe injury. Use an
be included with the wall mount. We recommend authorized LG wall mount and contact the local
that you use an LG brand wall mount. When you dealer or qualified personnel. When using a
do not use LG’s wall mount bracket, please use a third-party wall mount, it is not covered by the
wall mount bracket where the device is adequately warranty.
secured to the wall with enough space to allow ••Do not overtighten the screws as this may cause
connectivity to external devices. damage to the TV and void your warranty.
••Use the screws and wall mounts that meet the
VESA standard. Any damages or injuries by
misuse or using an improper accessory are not
10 cm
covered by the warranty.
10 cm NOTE
10 cm
••Use the screws that are listed in the VESA
standard screw specifications.
10 cm
••The wall mount kit includes an installation
manual and necessary parts.
••The wall mount bracket is optional. You can
Make sure to use screws and wall mounts that obtain additional accessories from your local
meet the VESA standard. Standard dimensions for dealer.
the wall mount kits are described in the following ••The length of screws may differ depending upon
table. the wall mount. Make sure to use the proper
length.
••For more information, refer to the manual
supplied with the wall mount.
9
••When using the wall mounting bracket, apply Connecting to an Antenna or
the adhesive protective label to cover the
unused stand openings. This will prevent the Cable
accumulation of dust and dirt. (Use only when Connect an antenna, cable, or cable box to watch
provided with your particular model.) TV. The RF cable may not be supplied, depending
Provided Item upon the model.
CAUTION
••Make sure not to bend the copper wire of the RF
cable.
Adhesive protective label
NOTE
••To improve the picture quality in a poor signal
area, purchase a signal amplifier.
••Use a signal splitter to use 2 TVs or more.
Connections (Notifications) ••If the antenna is not installed properly, contact
You can connect various external devices to the TV. your dealer for assistance.
Supported external devices are: HD receivers, DVD ••DTV Audio Supported Codec: MPEG, AAC,
ENGLISH
players, VCRs, audio systems, USB storage devices, HE-AAC, Dolby Digital.
PC, gaming devices, and other external devices. ••Direct ULTRA HD broadcast is unavailable in
For more information on an external device’s areas without an ULTRA HD signal.
connection, refer to the manual provided with ••This TV cannot receive ULTRA HD (3840 x 2160
each device. pixels) broadcasts directly because the related
standards have not been confirmed.
NOTE (Depending upon model)
••If you record a TV program on a DVD recorder or
VCR, make sure to connect the TV signal input
cable to the TV through a DVD recorder or VCR. Other Connections
For more information about recording, refer to
the manual provided with the connected device. Connect your TV to external devices. For the best
••The external device connections shown may picture and audio quality, connect the external
differ slightly from illustrations in this manual. device and the TV with the HDMI cable. Depending
••Connect external devices to the TV regardless upon the model, a cable may not be provided.
about the order of the TV port.
••If you connect a gaming device to the TV, use the NOTE
cable supplied with the gaming device. •• j j j Picture j
••Refer to the external equipment’s manual for HDMI ULTRA HD Deep Color:
operating instructions. -- On: Support 4K @ 50/60 Hz (4:4:4, 4:2:2, 4:2:0)
••In PC mode, there may be noise associated -- Off: Support 4K @ 50/60 Hz (4:2:0)
with the resolution, vertical pattern, contrast, ••If the device connected to Input Port also
or brightness. If noise is present, change the PC supports ULTRA HD Deep Color, your picture
output to another resolution, change the refresh may be clearer. However, if the device doesn’t
rate to another rate, or adjust the brightness and support it, it may not work properly. In that case,
contrast on the PICTURE menu until the picture connect the device to a different HDMI port or
is clear. change the TV’s HDMI ULTRA HD Deep Color
••Depending upon the graphics card, some setting to Off.
resolution settings may not allow the image to -- This feature is available only on certain models
be positioned on the screen properly. which support HDMI ULTRA HD Deep Color.
10
Magic Remote Functions
(Image shown may differ from your TV.)
When the message Magic remote battery is low.
Change the battery. is displayed, replace the B
battery. To install batteries, open the battery cover,
replace batteries (1.5 V AA) matching and
ends to the label inside the compartment, and
close the battery cover. Failure to match the correct
polarities of the battery may cause the battery to
burst or leak, resulting in fire, personal injury, or
ambient pollution. Be sure to point the remote
control at the remote control sensor on the TV.
To remove the batteries, perform the installation C
actions in reverse.
This remote uses infrared light. When in use, it
should be pointed in the direction of the TV’s
GUIDE
remote sensor.
CAUTION
••Do not mix old and new batteries, as this may
damage the remote control.
ENGLISH
B
A VOL Adjusts the volume level.
(MUTE) Mutes all sounds.
(Home) Accesses the Home menu.
A CH Scrolls through the saved channels.
(Back) Returns to the previous screen.
(POWER) Turns the TV on or off.
EXIT Clears all on-screen displays and returns to
(Input) Changes the input source.
TV viewing.
* Pressing and holding the (Input) button
displays all the lists of external inputs.
Number button Enters numbers. C
- (Dash) Inserts a dash between numbers such as (up/down/left/right) Press the up, down,
2-1 and 2-2. left or right button to scroll the menu. If you press
LIST Accesses the saved channel list. buttons while the pointer is in use, the
INFO Views the information of the current pointer will disappear from the screen and Magic
channels and screen. Remote will operate like a general remote control.
To display the pointer on the screen again, shake
Magic Remote to the left and right.
Wheel (OK) Press the center of the Wheel
button to select a menu. You can change channels
by using the Wheel button.
11
GUIDE Displays the program event according to How to Use Magic Remote
time scheduler. ••Shake the Magic Remote slightly to
(Screen Remote) Displays the Screen Remote. the right and left or press
* Accesses the Universal Control Menu in some regions.
(Home), (Input), buttons
to make the pointer appear on the
Used for viewing 3D video. (For 3D models) screen. (In some TV models, the
(Voice recognition) Network connection is pointer will appear when you turn the
required to use the voice recognition function. Wheel button.)
••If the pointer has not been used for
1. Press the voice recognition button. a certain period of time or Magic
2. Speak when the voice display window appears Remote is placed on a flat surface,
on TV screen. then the pointer will disappear.
••Use the Magic Remote no further than 10 cm ••If the pointer does not move as you
from your face. wish, shake Magic Remote to the left
••The voice recognition may fail when you speak and right. The pointer will move to
too fast or too slowly. the center of the screen.
••The recognition rate may vary depending upon ••The Magic Remote depletes batteries
the user’s characteristics (voice, pronunciation, faster than a normal remote due to
intonation, and speed) and the environment the additional features.
(noise and TV volume).
(Q. Settings) Accesses the quick settings. Precautions to Take When Using the
* Pressing and holding the (Q. Settings) button Magic Remote
displays the Advanced menu.
••Use the Magic Remote within the maximum
Color buttons These access special functions in communication distance 10 m. Using the remote
some menus. control beyond this distance, or with an object
ENGLISH
12
Licenses Specifications
Supported licenses may differ by model. Product specifications may be changed without
For more information about licenses, visit prior notice due to upgrade of product functions.
www.lg.com.
Television System
NTSC, PAL-M/N, SBTVD
Program Coverage
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135
Information
Environment Condition
To obtain the source code under GPL, LGPL, MPL,
and other open source licenses, that is contained in ••Operating Temperature
this product, please visit http://opensource.lge.com. 0 °C to 40 °C
In addition to the source code, all referred license ••Operating Humidity
terms, warranty disclaimers and copyright notices Less than 80 %
are available for download. ••Storage Temperature
LG Electronics will also provide open source code - 20 °C to 60 °C
to you on CD-ROM for a charge covering the cost ••Storage Humidity
of performing such distribution (such as the cost of Less than 85 %
ENGLISH
media, shipping, and handling) upon email request
to opensource@lge.com. This offer is valid for three Wireless Module (LGSBW41)
(3) years from the date on which you purchased Specifications
the product.
(For UF6800, UF6900, UF7700, UF8500, UG8700
series)
Wireless LAN Bluetooth
Troubleshooting Bluetooth
••Cannot control the TV with the remote control. Standard IEEE 802.11a/b/g/n Standard Version
-- Check if anything such as tape has been placed 4.0
over the receiver. Frequency
2400 to 2483.5 MHz
Frequency
2400 to
-- Check if there is any obstacle between the range
5150 to 5250 MHz
range
2483.5
product and the remote control. 5725 to 5850 MHz MHz
-- Replace the batteries with new ones. 802.11a: 11.5 dBm
••No image display and no sound is produced. 802.11b: 11 dBm
-- Check if the product is turned on. Output 802.11g: 10.5 dBm Output
10 dBm or
-- Check if the power cord is connected to a wall power 802.11n - 2.4 GHz: power
Lower
outlet. (Max.) 11 dBm (Max.)
802.11n - 5 GHz:
-- Check if there is a problem in the wall outlet by
12.5 dBm
connecting other products.
•• Because band channel used by the country could
••The TV turns off suddenly. be different, the user can not change or adjust the
-- Check the power control settings. The power operating frequency and this product is set for the
supply may be interrupted. regional frequency table.
-- Check if the Sleep Timer / Timer Power Off •• This device should be installed and operated with
feature is activated in the Timers settings. minimum distance 20 cm between the device and
-- If there is no signal while the TV is on, the TV your body. And this phrase is for the general statement
will turn off automatically after 15 minutes of for consideration of user environment.
inactivity. •• Contains FCC ID: BEJLGSBW41 /
Contains IC: 2703H-LGSBW41
13
Wireless Module (LGSBW51)
Specifications
(For UF9500 series)
Wireless LAN Bluetooth
IEEE 802.11a/b/g/n/ Bluetooth
Standard Standard
ac Version 4.0
2400 to 2483.5 MHz 2400 to
Frequency Frequency
5150 to 5250 MHz 2483.5
range range
5725 to 5850 MHz MHz
802.11a: 15 dBm
802.11b: 17 dBm
802.11g: 15 dBm
Output 802.11n - 2.4 GHz: Output
10 dBm or
power 15 dBm power
Lower
(Max.) 802.11n - 5 GHz: (Max.)
15 dBm
802.11ac - 5 GHz :
15 dBm
•• Because band channel used by the country could
be different, the user can not change or adjust the
operating frequency and this product is set for the
regional frequency table.
•• This device should be installed and operated with
minimum distance 20 cm between the device and
your body. And this phrase is for the general statement
for consideration of user environment.
•• Contains FCC ID: BEJLGSBW51 /
ENGLISH
14
The model and serial numbers of the TV are located on
the back and on one side of the TV. Record them below
should you ever need service.
MODEL
SERIAL
MANUAL DEL USUARIO
Seguridad y Consultas
TELEVISOR LED*
* Los televisores con LED de LG tienen pantallas LCD
con luces de fondo LED.
www.lg.com
INSTRUCCIONES DE Lea estas instrucciones.
Conserve estas instrucciones.
SEGURIDAD IMPORTANTES Preste atención a las advertencias.
Siga siempre estas instrucciones para evitar Siga todas las instrucciones.
situaciones peligrosas y garantizar el rendimiento
máximo del producto.
••No use el aparato cerca del agua.
ADVERTENCIA/PRECAUCIÓN
RIESGO DE CHOQUE
ELECTRICO NO ABRIR
2
••Use el producto únicamente en mesas portátiles, ••PRECAUCIÓN con respecto al cable de
pies, trípodes, soportes o mesas indicados por el alimentación (puede variar según el país):
fabricante o provistos con el aparato. Al emplear Consulte la página de especificaciones en el
una mesa portátil, tenga cuidado al moverla con manual del usuario. No conecte demasiados
el aparato encima, para evitar daños por caídas. aparatos a la misma toma de ca, dado que
podría provocar incendios o descargas eléctricas.
No sobrecargue los tomacorrientes de la
pared. Asegúrese de que los tomacorrientes
de la pared no estén sobrecargados, sueltos
••Desenchufe el aparato durante tormentas ni dañados, y que los alargues, los cables de
eléctricas o si no planea usarlo durante un alimentación y el aislamiento de los cables no
periodo prolongado. estén desgastados, ya que estas condiciones
son peligrosas. Cualquiera de estos casos podría
provocar incendios o descargas eléctricas.
Examine regularmente el cable del aparato;
si le parece que está dañado o deteriorado,
desenchúfelo y no use más ese cable. Llame al
••Consulte todas las cuestiones de servicio de personal de servicio técnico autorizado para
mantenimiento al personal de servicio calificado. que lo reemplace por uno exactamente igual.
El servicio es necesario cuando el aparato sufre Proteja el cable de alimentación de daños físicos
algún tipo de daño, por ejemplo, cuando un o mecánicos, es decir, que no se tuerza, doble,
cable de suministro eléctrico o un conector está deforme, que no quede atrapado al cerrar
dañado, se derrama líquido o se cae un objeto una puerta y que no lo pisen. Preste especial
dentro del aparato, el aparato se expone a la atención a los enchufes, tomacorrientes de
lluvia o a la humedad, no funciona en forma la pared y al punto de salida del cable en el
normal o sufre una caída. aparato. No mueva el televisor con el cable
de alimentación enchufado. No use un cable
de alimentación que esté suelto o dañado. Al
desenchufar el cable, asegúrese de hacerlo
desde el enchufe. No tire del cable para
••No ejerza demasiada presión sobre el panel desenchufar el televisor.
con la mano ni con objetos punzantes, como
un clavo, una lapicera o un lápiz, ni raye la
superficie.
••Advertencia - para disminuir los riesgos de
ESPAÑOL
incendio o descargas eléctricas, no exponga el
producto a la lluvia, la humedad u otro tipo de
líquidos. No toque el televisor con las manos
••No inserte objetos de metal u otro material mojadas. No instale el producto cerca de objetos
conductor en el cable de alimentación. No toque inflamables como combustible o velas, ni lo
el extremo del cable de alimentación mientras exponga al aire acondicionado directo.
esté enchufado.
••Mantenga el material de empaque contra la
humedad y el empaque de vinilo fuera del
alcance de los niños. El material contra la
humedad es dañino si se ingiere. Si se ingiere por ••No exponga el producto a ningún tipo de
error, se debe inducir el vómito e ir al hospital goteo ni salpicaduras, y no coloque sobre o por
más cercano. Además, el empaque de vinilo encima del televisor (por ejemplo, en estantes
puede provocar asfixia. Manténgalo fuera del que pudieran encontrarse arriba de la unidad)
alcance de los niños. ningún tipo de objeto que contenga líquido,
como floreros, tazas, etc.
3
••Puesta a tierra ••Limpieza
(Excepto dispositivos sin conexión a tierra.) Al efectuar la limpieza, desenchufe el cable
Asegúrese de que el cable de puesta a tierra esté de alimentación y limpie suavemente con un
conectado para evitar descargas eléctricas (es paño suave para no rayar la superficie. No rocíe
decir, un televisor con un enchufe de ca de tres con agua ni otros líquidos directamente sobre
clavijas debe conectarse a un tomacorriente de el televisor, dado que podría provocar una
ca con puesta a tierra de tres clavijas). descarga eléctrica. No limpie con productos
Si no puede colocarse ninguna puesta a tierra, químicos como alcohol, diluyentes o bencina.
solicite a un electricista calificado que instale ••Traslados
un disyuntor. No intente improvisar una puesta Asegúrese de que el aparato esté apagado,
a tierra con conexiones a cables de teléfono, desenchufado y que no quede ningún cable
pararrayos o tuberías de gas. conectado. Es posible que se necesiten dos
personas para trasladar los televisores de gran
tamaño. No ejerza presión ni empuje el panel
Alimentación frontal del televisor.
Interruptor
diferencial ••Ventilación
Instale el televisor en un lugar bien ventilado.
••Mientras la unidad esté conectada al No lo coloque en un lugar cerrado como, por
tomacorriente de ca de la pared, no se ejemplo, un estante para libros. No cubra el
desconectará de la fuente de alimentación de ca producto con telas ni ningún otro material
aún cuando el aparato esté apagado. mientras esté enchufado. No lo instale en lugares
••No intente modificar este producto de ninguna con demasiado polvo.
manera sin autorización previa por escrito de LG ••Si huele humo u otros olores que provienen
Electronics. Cualquier tipo de modificación sin de la TV, desconecte el cable de alimentación
autorización previa podría anular la autoridad y comuníquese con un centro de servicio
del usuario para usar el producto. autorizado.
••Puesta a tierra con una antena exterior ••Mantenga el aparato alejado de la luz solar
(puede variar según el país): directa.
Si instala una antena exterior, tome las siguientes ••Nunca toque el aparato o la antena durante una
precauciones. No se debe instalar el sistema tormenta eléctrica o con truenos.
de antena exterior cerca de las líneas aéreas de ••Al montar el televisor en la pared, asegúrese de
transmisión de energía, de ningún circuito o que los cables de alimentación y de señal no
luz eléctrica, ni en ningún lugar donde pudiera queden colgando en la parte posterior.
entrar en contacto con este tipo de cables ••No permita que se golpee el producto o que
eléctricos o circuitos, dado que podría provocar algún objeto se caiga dentro de él, ni que se
daños graves o incluso la muerte. Asegúrese
ESPAÑOL
golpee la pantalla.
de que el sistema de antena tenga una puesta ••DESCONEXIÓN DEL DISPOSITIVO DE LA
a tierra para proteger contra sobretensiones y ALIMENTACIÓN PRINCIPAL
acumulaciones de cargas estáticas. La Sección El enchufe de alimentación se desconecta del
810 del Código Nacional de Electricidad (NEC) de dispositivo. En caso de una emergencia, el
los Estados Unidos establece la forma de realizar enchufe debe estar siempre accesible.
una puesta a tierra correcta del mástil, de la ••Baterías
estructura de soporte, del cable de bajada a una Guarde los accesorios (baterías, etc.) en un lugar
unidad de descarga de la antena, el tamaño de seguro lejos del alcance de los niños.
los conductores de puesta a tierra, la ubicación ••Este aparato usa baterías. Puede ser que en su
de la unidad de descarga de la antena, y la comunidad existan normativas que requieren
conexión y los requisitos de los electrodos de que deseche estas baterías de forma correcta
puesta a tierra debido a las consideraciones ambientales.
Puesta a tierra de la antena según el Código Póngase en contacto con la autoridad local
Nacional de Electricidad, ANSI/NFPA 70 para obtener información acerca del desecho o
reciclaje.
••No deseche las baterías en el fuego.
Cable de entrada de la antena
••No provoque cortes de circuitos, desarme ni
Unidad de descarga de la antena (NEC,
Sección 810-20)
permita que las baterías se sobrecalienten
Abrazadera de puesta
a tierra ••No utilice equipo de alto voltaje cerca de la TV,
Equipo de servicio eléctrico Conductor de puesta a tierra (NEC,
Sección 810-21)
(por ejemplo, eliminador de insectos eléctrico).
Sistema de electrodos de conexión Esto puede causar que el producto funcione mal.
Abrazadera de puesta
a tierra
a tierra del servicio de energía (NEC,
Artículo 250, Parte H)
••Aparición de puntos
NEC: National Electrical Code
(Código Nacional de Electricidad) El panel es un producto de alta tecnología con
una resolución de entre dos y seis millones de
píxeles. En raras ocasiones, es posible que note
la presencia de pequeños puntos en la pantalla
mientras mira televisión. Estos puntos son
píxeles desactivados y no afectan el rendimiento
4 ni la fiabilidad del televisor.
••Reproducción de ruidos
Crujidos Es posible que se produzcan crujidos
Ver imágenes en 3D
cuando esté mirando televisión o al apagar el (En televisores 3D)
televisor; se trata de un ruido generado por la
contracción térmica del plástico debido a la ADVERTENCIA
temperatura y la humedad. Este ruido es común
en productos donde se requiere la deformación
térmica. Entorno de visualización
Zumbidos en el circuito eléctrico o el panel ••Tiempo de visualización
Se trata de un ruido de bajo nivel, generado por -C
uando vea contenido en 3D, tome un
un circuito de conmutación de alta velocidad,
que suministra una gran cantidad de corriente descanso de 5 a 15 minutos cada hora.
para que un producto pueda funcionar. Varía Ver contenido en 3D durante un período
según cada producto. Este ruido no afecta el prolongado puede causar dolor de cabeza,
rendimiento ni la fiabilidad del producto. mareos, fatiga o fatiga visual.
••Tenga cuidado de no tocar las aberturas de
ventilación. Al mirar televisión durante largos Personas que experimenten
periodos, las aberturas de ventilación pueden convulsiones por fotosensibilidad o
calentarse. Esto no afecta el rendimiento ni causa
defectos en el producto. enfermedades crónicas
••No instale este producto en una pared si podría ••Algunos usuarios pueden experimentar
ser expuesto a aceite o vapor de aceite. Esto convulsiones o síntomas anormales cuando se
podría dañar el producto y hacer que se caiga.
••Si siente que el televisor está frío al tocarlo, exponen a una luz destellante o a un patrón
es posible que ocurra un pequeño parpadeo específico proveniente de contenido en 3D.
cuando lo prenda. Se trata de algo normal y no ••No vea videos en 3D si experimenta náuseas,
significa que el televisor esté dañado. También si está embarazada o sufre de una enfermedad
es posible que aparezcan pequeños puntos en la crónica como epilepsia, afecciones cardiacas
pantalla, de color rojo, verde o azul. Sin embargo, o enfermedades relacionadas con la presión
no afectan el rendimiento del televisor. No toque arterial, etc.
la pantalla LCD ni coloque los dedos sobre ella ••Se recomienda que las personas que sufran
durante mucho tiempo. Esto podría producir
algunos efectos de distorsión temporales en la de ceguera estereoscópica o anomalías
pantalla. estereoscópicas no vean contenido en 3D. Puede
experimentar imágenes dobles o incomodidad
Cómo evitar el efecto de degradación al ver contenido en 3D.
••Si sufre de estrabismo (visión cruzada), ambliopía
de la imagen por sobreexposición o
ESPAÑOL
(ojo vago) o astigmatismo, puede experimentar
quemadura de pantalla del televisor problemas al percibir la profundidad y sentir
fatiga con facilidad debido a las imágenes
dobles. Se recomienda tomar descansos más
frecuentes que el adulto promedio.
••Si su vista experimenta variaciones entre su ojo
derecho y su ojo izquierdo, realícese un examen
••Si se muestra una imagen fija en la pantalla del a la vista antes de ver contenido en 3D.
televisor durante un período largo, esta quedará
impresa y se convertirá en una distorsión
Síntomas que requieren
permanente de la pantalla. A este desperfecto se descontinuación o abstinencia de ver
lo conoce como degradación de la imagen por contenido en 3D
sobreexposición o quemadura de pantalla y no ••No vea contenido en 3D cuando experimente
está cubierto por la garantía. fatiga debido a falta de sueño, exceso de trabajo
••Si la relación de aspecto del televisor se o por el consumo de bebidas alcohólicas.
establece durante mucho tiempo en 4:3 se ••Si experimenta éstos síntomas, deje de ver
puede producir una degradación de imagen en contenido en 3D y descanse hasta que los
las zonas de bandas del formato buzón. síntomas desaparezcan.
••Evite emitir imágenes fijas en la pantalla del -C onsulte a su médico si los síntomas persisten.
televisor durante períodos prolongados (2 horas Entre los síntomas se pueden encontrar dolor
o más para LCD, 1 hora o más para TV de plasma) de cabeza, dolor ocular, mareos, visión borrosa,
para evitar la degradación de imagen. incomodidad, imágenes dobles, incomodidad
visual o fatiga.
5
PRECAUCIÓN Preparación
Entorno de visualización NOTA
••Distancia de visualización ••La imagen puede ser diferente a la de su
- Mantenga una distancia de al menos dos veces televisor.
la longitud diagonal de la pantalla cuando vea ••El OSD (On Screen Display, Despliegue En la
Pantalla) de su TV puede ser un poco diferente
contenido en 3D. Si siente incomodidad al ver que este manual.
contenido en 3D, aléjese del TV. ••Los menús y las opciones disponibles pueden
variar según la fuente de entrada que utilice.
Edad de visualización recomendada ••Es posible que se agreguen nuevas funciones a
••Infantes / Niños este televisor en el futuro.
-- Se prohíbe el uso y visualización de contenido ••Los artículos suministrados con el producto
en 3D a niños menores de 5 años de edad. adquirido pueden variar según el modelo.
••Es posible que cambien las especificaciones
-- Los niños menores de 10 años de edad pueden del producto o el contenido del manual sin
reaccionar exageradamente y alborotarse previo aviso debido a las actualizaciones de las
demasiado debido a que su visión se encuentra funciones del producto.
en desarrollo (por ejemplo: tratar de tocar ••Para que la conexión sea óptima, los cables
la pantalla o saltar hacia ella). Se requiere HDMI y los dispositivos USB tienen que tener
supervisar y dedicar atención especial a niños biseles que no superen los 10 mm de espesor y
que vean contenido en 3D. 18 mm de ancho.
-- Los niños presentan una disparidad binocular ••Utilice un cable de extensión que sea compatible
con USB 2.0 en caso de que el cable USB o la
para ver contenido en 3D mayor que la de los tarjeta de memoria USB no encajen en el puerto
adultos, debido a que la distancia que separa USB del TV.
los ojos es menor que la de los adultos. Por ••Utilice un cable certificado con el logotipo
lo tanto, los niños perciben una profundidad de HDMI adjunto. Si no utiliza un cable HDMI
estereoscópica mayor en comparación con los certificado, es posible que la pantalla no muestre
adultos al ver la misma imagen 3D. imágenes o que ocurra un error de conexión.
••Adolescentes ••Tipos de cable HDMI recomendados (3 m o menos)
-- Los adolescentes menores de 19 años de edad - Cable HDMI®/ TM de alta velocidad
pueden recibir una mayor estimulación a la luz - Cable HDMI®/ TM de alta velocidad con Ethernet
proveniente de videos en 3D. Recomiéndeles
no ver videos en 3D durante un período de
ESPAÑOL
6
••Al instalar la base del televisor, ponga la pantalla PRECAUCIÓN
hacia abajo sobre una mesa acolchada o una
superficie plana para evitar rayas. ••No ejerza presión, refriegue ni golpee la
superficie con las uñas o un objeto punzante,
••Asegúrese de que los tornillos estén dado que puede rayar la pantalla y producir
completamente ajustados. (Si no están lo distorsiones en la imagen.
suficientemente ajustados, el TV puede ••No utilice sustancias químicas (como
inclinarse hacia delante después de instalarse.) ceras, bencina, alcohol, tíner, insecticidas,
••No ajuste los tornillos con demasiada fuerza, de desodorantes de ambientes o lubricantes) dado
lo contrario, se pueden desgastar y aflojar. que pueden dañar el acabado de la pantalla y
causar decoloración.
••No rocíe líquido sobre la superficie. Si entra
Complementos opcionales agua en el televisor, puede ocasionar incendios,
Los complementos opcionales se pueden descargas eléctricas o mal funcionamiento.
cambiar o modificar para mejorar la calidad, sin
necesidad de aviso previo. Para adquirir estos
Cable de alimentación
elementos, comuníquese con su distribuidor. Estos Quite con regularidad el polvo o la tierra
dispositivos solo funcionarán en ciertos modelos. acumulados en el cable de alimentación.
Es posible que el nombre o el diseño del modelo
hayan cambiado, debido a las circunstancias o Levantar y trasladar el televisor
políticas del fabricante.
Si desea levantar o trasladar el televisor, lea las
(Según el modelo) instrucciones a continuación para no rayar o
AG-F*** AG-F***DP AN-VC550 dañar el aparato, y para transportarlo de forma
segura, independientemente del tamaño o tipo de
Anteojos para Anteojos Dual Cámara aparato.
Cinema 3D Play Inteligente
••Se recomienda trasladar el televisor en la caja o
AN-MR6** Dispositivo de el material de empaque en el que lo recibió al
Remoto Mágico audio de LG comprarlo.
••Antes de mover o levantar el televisor,
desconecte el cable de alimentación y el resto de
Mantenimiento los cables.
ESPAÑOL
usted para evitar algun daño.
funcionando con el máximo rendimiento y para
extender la vida útil del producto. ••Sostenga con firmeza la parte superior e
inferior del marco del televisor. Asegúrese de
PRECAUCIÓN no sostenerlo por la parte transparente, por la
bocina o por el área de rejillas de las bocinas.
••Antes de proceder con la limpieza, apague el
equipo y desconecte el cable de alimentación y
todos los cables.
••Cuando deje el TV desatendido o no lo utilice
durante mucho tiempo, desconecte el cable de
alimentación de la toma de corriente para evitar
posibles daños por descargas o sobrecargas de
energía.
Botón de control
10 cm
10 cm
10 cm
m
10 c
Funciones Básicas
Cuando la TV está apagada,
coloque el dedo en el botón
Encendido
ESPAÑOL
NOTA
• Con el dedo sobre el botón de control, muévalo
hacia arriba, abajo, izquierda o derecha, tenga
cuidado de no presionar el botón de control. Si
presiona primero el botón de control, es posible
que no pueda ajustar el nivel de volumen y/o
desplazarse por los canales guardados.
8
1 Inserte y ajuste los tornillos de ojo del televisor 43UF6800 49/55UF6800
en su parte posterior. 43UF6900 49UF6900
- En caso de que haya tornillos insertados, Modelo 40/43UF7700 49/55UF7700
49/55UF8500
primero retírelos.
55UF9500
2 Utilice los tornillos para colocar los soportes 55UG8700
correspondientes en la pared. Acople el soporte VESA (A x B) 200 x 200 300 x 300
de la pared con los tornillos de ojo a la parte Tornillo estándar M6 M6
posterior del televisor. Cantidad de
tornillos 4 4
3 Conecte los tornillos de ojo y los soportes
con un cordón fuerte y ajústelos con firmeza. Soporte de pared MSW240 MSW240
(opcional) LSW240B LSW350B
Asegúrese de mantener el cordón en posición
horizontal a la superficie plana. 65UF6800 70/79UF7700
60/65UF7700
Modelo 60/65UF8500
PRECAUCIÓN 65UF9500
••Asegúrese de que los niños no se suban al 65UG8700
televisor ni se cuelguen de él. VESA (A x B) 300 x 300 600 x 400
Tornillo estándar M6 M8
NOTA Cantidad de
tornillos 4 4
••Utilice una plataforma o un armario que sea lo
suficientemente fuerte y grande para sostener el Soporte de pared
televisor de manera segura. (opcional) LSW350B LSW640B
••Los soportes, los tornillos y los cordones son
opcionales. Puede solicitar otros accesorios a A
través de su distribuidor local.
B
Montar en la pared
Se puede usar un soporte de pared opcional PRECAUCIÓN
con el televisor LG. Consulte al distribuidor local ••Antes de mover o instalar el televisor, desconecte
para adquirir un soporte de pared que cumpla el cable de alimentación. De lo contrario, podría
con el estándar VESA que usa su modelo de TV. provocar una descarga eléctrica.
Cuidadosamente coloque el soporte de pared ••Antes de montar el televisor en la pared, retire la
en la parte posterior del TV. Instale el soporte de base, realizando la instalación de ésta en orden
ESPAÑOL
pared en una pared sólida, perpendicular al piso. inverso.
Si va a instalar el TV sobre otros materiales de ••Si instala el televisor en el techo o en una pared
construcción, póngase en contacto con personal
técnico calificado para instalar el soporte de inclinada, podría caerse y provocar lesiones
pared. El soporte de pared incluirá instrucciones graves. Utilice un soporte de pared autorizado
detalladas. Recomendamos que use un soporte de por LG y comuníquese con el distribuidor local o
pared de marca LG. Cuando no utilice el soporte de con personal técnico calificado. Cuando usa un
montaje de pared LG, por favor, utilice un soporte soporte de pared de otro fabricante, este no es
de montaje de pared en el que el dispositivo esté cubierto por la garantía.
debidamente sujeto a la pared con el espacio ••No ajuste excesivamente los tornillos, dado que
suficiente para permitir la conectividad con podría dañar el televisor y anular la garantía.
dispositivos externos. ••Utilice tornillos y soportes de pared que cumplan
con la norma VESA. La garantía no cubre daños
ni lesiones provocados por el uso incorrecto del
aparato o de accesorios no autorizados.
10 cm NOTA
••Utilice los tornillos enumerados en las
10 cm especificaciones del estándar VESA.
10 cm ••El conjunto de montaje de pared incluye un
manual de instalación y las piezas necesarias.
10 cm ••El soporte de pared es opcional. Puede adquirir
accesorios adicionales con el distribuidor local.
••La longitud de los tornillos puede variar según el
tipo de soporte de pared. Asegúrese de utilizar la
Asegúrese de usar tornillos y soportes de pared longitud adecuada.
que cumplan con el estándar VESA. En la tabla ••Para obtener más información, consulte el
siguiente se detallan las dimensiones de los manual suministrado con el montaje de pared.
conjuntos de montaje de pared.
9
••Cuando use el soporte de pared, coloque la Conexión de una antena o un
etiqueta adhesiva protectora para cubrir las
aberturas del soporte no utilizadas. Esto ayudará cable
a prevenir la acumulación de polvo y suciedad. Para mirar televisión, conecte una antena, un cable
(Use únicamente cuando sea proporcionado o una caja de cable. Las ilustraciones pueden diferir
especialmente para su modelo.) de los elementos reales y el cable RF es opcional.
Artículo proporcionado
PRECAUCIÓN
••Asegúrese de no doblar el alambre de cobre del
cable de RF.
Etiqueta adhesiva
protectora Alambre de cobre
••Al retirar las cubiertas del soporte, inserte una
herramienta plana debajo de las flechas. (por ••Primero conecte todos los dispositivos entre
ejemplo, un destornillador plano) (Para 79UF7700) sí y luego conecte el cable de alimentación al
tomacorriente, para que el televisor no resulte
dañado.
NOTA
••Para mejorar la calidad de imagen en un area de
baja señal, favor de comprar un amplificador de
señal e instalar adecuadamente.
Conexiones (Notificaciones) ••Utilice un divisor de señal para más de
Se pueden conectar dispositivos externos al TV. Los 2 televisores.
dispositivos externos compatibles son: receptores ••Si la antena no está correctamente instalada,
de HD, reproductores de DVD, VCR, sistemas de póngase en contacto con su distribuidor.
audio, dispositivos de almacenamiento USB, PC, ••Códec compatible con Audio DTV: MPEG, AAC,
dispositivos de juegos, etc. Para más información HE-AAC, Dolby Digital.
acerca de la conexión de dispositivos externos, ••La emisión ULTRA HD directa no esta disponible
diríjase al manual que viene con cada dispositivo. en áreas sin una señal ULTRA HD.
••Esta TV no puede recibir transmisiones
ULTRA HD (3 840 x 2 160 píxeles) directamente,
NOTA
ESPAÑOL
PRECAUCIÓN
••No mezcle pilas viejas y nuevas, ya que esto
puede dañar el control remoto.
ESPAÑOL
VOL Ajusta el nivel del volumen.
(SILENCIO) Silencia todos los sonidos.
(Home) Accede al menú Home.
A CH Permite desplazarse por los canales
guardados.
(Atrás) Regresa a la pantalla anterior.
EXIT Borra todo lo que muestra la pantalla y
A regresa a ver la televisión.
(ENCENDIDO/APAGADO) Enciende o apaga
la TV. C
(ENTRADA) Cambia la fuente de entrada. (arriba/abajo/izquierda/derecha)
* Si mantiene presionado el botón de (ENTRADA) Presione los botones arriba, abajo, izquierda o
aparece toda la lista de entradas externas. derecha para desplazarse por el menú. Si presiona
Botones numéricos Permiten introducir números. los botones mientras el puntero está en
uso, éste desaparecerá de la pantalla y el Control
- (GUIÓN) Inserta un guión entre los números, Remoto Mágico funcionará como un control
por ejemplo, 2-1 y 2-2. remoto común. Para ver el puntero en la pantalla
LIST Acceder a la lista de canales guardados. nuevamente, agite el Control Remoto Mágico a la
izquierda y a la derecha.
INFO Ve la información de los canales actuales y
la pantalla. Rueda (OK) Presione el centro del botón
Rueda para seleccionar un menú. Puede cambiar
los canales utilizando el botón Rueda.
11
GUIDE Muestra el evento de programa según la Como usar el Control Remoto Mágico
hora programada.
••Agite suavemente el Control Remoto
(Control remoto de pantalla) Muestra el Mágico hacia la derecha y a la
control remoto de pantalla. izquierda o presione los botones
*A
ccede al menú de control remoto universal en (Home), (ENTRADA),
algunas regiones. para que el puntero aparezca en la
pantalla.
Sirve para ver video en 3D. (En televisores 3D)
(En algunos modelos de TV, el
(Reconocimiento de voz) Se requiere de puntero aparecerá cuando gire el
una conexión de red para utilizar la función de botón Rueda.)
reconocimiento de voz. ••El puntero desaparecerá, si el puntero
1. Presione el botón de reconocimiento de voz. no se ha utilizado durante un cierto
2. Hable cuando aparezca la ventana de período de tiempo o el Control
reproducción de voz en la pantalla del televisor. Remoto Mágico se coloca sobre una
••Utilice el Control Remoto Mágico a no más de superficie plana.
10 cm de su rostro. ••Si el puntero no responde
••El reconocimiento de voz puede fallar si habla correctamente, puede restablecerlo
muy rápido o muy lento. moviéndolo hacia el borde de la
••La velocidad de reconocimiento puede variar pantalla.
dependiendo de las características del usuario ••El Control Remoto Mágico consume
(voz, pronunciación, entonación y velocidad) y
del ambiente (ruido y volumen de la TV). las baterías más rápido que un
control remoto normal debido a sus
(Configuración rápida) Accede a la funciones adicionales.
configuración rápida.
* Si mantiene presionado el botón de (Configuración
rápida) aparece el menú de Configuración avanzada.
Precauciones que debe seguir al
Botones de color Permiten acceder a funciones utilizar el Control Remoto Mágico
especiales en algunos menús. ••Use el Control Remoto Mágico dentro de la
( Rojo, Verde, Amarillo, Azul) distancia de comunicación máxima 10 m. El uso
del control remoto fuera de esta distancia o con
un objeto que obstruya la comunicación puede
provocar un error.
Registrando el Control Remoto ••Otros dispositivos cercanos pueden generar
Mágico
ESPAÑOL
12
Licencias Especificaciones
Las licencias admitidas pueden variar según el Las especificaciones del producto pueden cambiar
modelo. Para obtener más información sobre las sin previo aviso debido a las actualizaciones de las
licencias, visite www.lg.com. funciones de los productos.
Sistema de televisión
NTSC, PAL-M/N, SBTVD
Cobertura de programas
VHF 2-13, UHF 14-69, DTV 2-69, CATV 1-135
ESPAÑOL
-- Compruebe si puso cualquier cosa sobre el Estándar IEEE 802.11a/b/g/n Estándar Bluetooth
receptor, como por ejemplo cinta adhesiva. 4.0
-- Compruebe que no haya ningún obstáculo Rango de
2 400 a 2 483,5 MHz
Rango de
2 400 a
entre el producto y el control remoto. 5 150 a 5 250 MHz 2 483,5
frecuencias frecuencias
-- Sustituya las pilas por unas nuevas. 5 725 a 5 850 MHz MHz
••No se muestra ninguna imagen ni se emite 802.11a: 11,5 dBm
sonido. 802.11b: 11 dBm
Potencia 802.11g: 10,5 dBm Potencia
-- Compruebe si el producto está encendido. de salida 802.11n - 2.4 GHz: de salida
10 dBm o
-- Compruebe si el cable de alimentación está (máxima) 11 dBm (máxima)
menor
conectado a la toma de la pared. 802.11n - 5 GHz:
-- Conecte otros productos para comprobar si hay 12,5 dBm
un problema con la toma de la pared. •• Como el canal de banda en uso por el país puede
••El televisor se apaga de repente. ser diferente, el usuario no puede cambiar o ajustar
-- Compruebe la configuración del control de la frecuencia de operación y este producto está
energía. Es posible que el suministro eléctrico configurado para la tabla de frecuencias regional.
se interrumpa. •• Este dispositivo debe ser instalado y utilizado a una
distancia mínima de 20 cm entre el dispositivo y su
-- Compruebe si la función de Temporizador /
cuerpo. Esta frase es por declaración general para la
Apagado por Temporizador está activada en consideración de entorno del usuario.
la configuración de TemporizadorES. •• Contiene FCC ID: BEJLGSBW41 /
-- Si no hay señal mientras el televisor está Contiene IC: 2703H-LGSBW41
encendido, este se apagará automáticamente
después de 15 minutos de inactividad.
13
Módulo inalámbrico LG (LGSBW51)
Especificación
(Para series UF9500)
Inalámbrico LAN Bluetooth
Versión
IEEE 802.11a/b/g/n/
Estándar Estándar Bluetooth
ac
4.0
2 400 a 2 483,5 MHz 2 400 a
Rango de Rango de
5 150 a 5 250 MHz 2 483,5
frecuencias frecuencias
5 725 a 5 850 MHz MHz
802.11a: 15 dBm
802.11b: 17 dBm
802.11g: 15 dBm
Potencia 802.11n - 2,4 GHz: Potencia
10 dBm o
de salida 15 dBm de salida
menor
(máxima) 802.11n - 5 GHz: (máxima)
15 dBm
802.11ac - 5 GHz :
15 dBm
•• Como el canal de banda en uso por el país puede
ser diferente, el usuario no puede cambiar o ajustar
la frecuencia de operación y este producto está
configurado para la tabla de frecuencias regional.
•• Este dispositivo debe ser instalado y utilizado a una
distancia mínima de 20 cm entre el dispositivo y su
cuerpo. Esta frase es por declaración general para la
consideración de entorno del usuario.
•• Contiene FCC ID: BEJLGSBW51 /
Contiene IC: 2703H-LGSBW51
ESPAÑOL
14
Los números de modelo y de serie del televisor
se encuentran ubicados en la parte posterior del
aparato. Regístrelos en el siguiente espacio por si
alguna vez necesita recurrir al servicio técnico.
MODELO
SERIE