Professional Documents
Culture Documents
Ex-Signal Light
dSLB 20 LED
Robust optical signalling device
for use in areas with
explosive atmospheres in group II
and zones 1, 2, 21 and 22
3 4 different modes:
permanent, strobe, blinking or rotating
3 Compact construction
3 Versatile
3 Protection degree IP 66 / 67
3 Explosion protection class:
II 2 D Ex tD A21 IP66 T80 °C – dust
II 2 G Ex de IIC T6 – gas
Application Design
It is often necessary to use optical signals The Ex-signal light consists of a
Use in a
for warning, indicating and signalling small flameproof housing of aluminium chemical plant
purposes in areas with explosive atmo- containing the electronics and a glass
spheres. cap of hardened borosilicate glass.
The Ex-signal light dSLB 20 LED offers The terminal enclosure is realised in the
these signalling possibilities. Through the explosion protection mode “increased
4 modes (blinking, flashing, permanent or safety”.
rotating) this signal lamp is uniquely in the
ex market. Decision-advantages for this
modern technology are not only the
reduced of warehouse charges (only one
article on stock) but also the illuminations
level. It is designed for continuous
operation.
The dSLB 20 LED signal light is activated
by switching on the power supply and is
available with various rated voltages. The
sturdy housing conforms to be installed
both indoors and outdoors.
Technical specifications
Operating voltage DC voltage 24 VDC ±20 %
Alternating current 85 – 265 VAC
FHF Funke + Huster Fernsig GmbH · P.O. Box 14 01 66 · D-45441 Mülheim an der Ruhr · Gewerbeallee 15-19 · D-45478 Mülheim an der Ruhr
FUNKE+HUSTER FERNSIG
•
Telephone +49 - 208 - 82 68 - 0 · Fax +49 - 208 - 82 68 - 286 · http://www.fhf.de · e-mail: info@fhf.de