Professional Documents
Culture Documents
Personal Information
Name: Jorge Burguete Preciado Age: 29 Years
Date: September 4, 1989 E-mail: joburburguete@gmail.com
Address: Col. Palmira Cuernavaca, Morelos. Mobile phone: (777) 1334511
Linkedin: linkedin.com/in/jorge-burguete ID Profesional: 8955029
Stract
Control and Automation Engineer with 4 years of experience in the automotive industry, automation
and control projects for assembly and production lines. Advanced knowledge in programming PLC,
HMI, Industrial Networks, integration of pneumatic equipment, MIG welding controllers, Spot, vision
systems, torques, robots, digital and analog I / O modules.
Education
Universidad La Salle Cuernavaca
2008- 2013 Bachelor’s Degree Engineer in Mechatronics.
Professional Experience
• Responsible for automated equipment, welding cells, automated welding stations, conveyors,
gantry systems, lift assist automated and control systems etc.
• Provide support for troubleshooting and avoid downtime, tracking failures from PLC.
• Configuration and parameterization of Cognex and keyence vision systems, SEW servo drives,
PowerFlex frequency inverters, Atlas Copco torque systems, safety devices, programmable safety
controllers, safety relays, I / O modules, analog modules, etc.
• Continuous improvement in the logic of programming, and development of HMI, migrations of
obsolete equipment to new technologies.
• Development of automation projects.
• Participation and support in engineering changes in the process.
• Configuration of Industrial Ethernet / IP, Devicenet, IOLink, Asi, Profibus and Profinet networks.
• Configuration of Managed Switch, Access Point and clients. (Scalance, Stratix, MOXA)
• Configuration and mapping of welding controllers.
• Systems management with OPC Server, development of ANDON systems, MES, PLC sequencing,
etc.
• Participation, contribution and implementation of improvement ideas, to reduce quality defects,
scrap reduction and plant savings.
• Configuration Robot Fanuc ARCmate 120ic.
• Programing of security controllers, Safety Industrial Level (SIL3 and SIL4).
Projects:
• Project implementation, for the reduction of missing cord, short cords and excessive welding, in
manual and robotic welding processes.
• Automation of the rework process in punching.
• Migration of Devicenet welding cells to Ethernet / IP, SLC to CompactLogix.
• Automated poka-yokes integration in the production lines.
• Project implementation for reduction of inverted and overlapped nuts in resistance welding.
• Project ANDON and MES (Manufacturing Execution System) production data are sent by OPC server
to a database to be shown on the internal page of the company.
• Partitioning of a production line controlled by a PLC Control Logix 1756-L73s to two PLCs 1756-L73s,
the logic between the two PLCs was balanced, the devicenet network was partitioned, and
ethernet/IP, obtaining greater performance in the control equipment.
• Responsible for the control and automation of Scada Systems Monitoring, BMS systems as well as
continuous improvement of said systems, optimizing the energy expenditure, having under
control, the flow of the main energies (hot water, cold water, ice water, HVAC, compressed air
and electric power).
• Optimize your process and improve response times.
• Automation and improvement of monitoring systems.
• Fault Correction.
• Monitoring of systems such as chillers, compressors, heat exchangers and boilers.
Projects:
Electrical design of tools, Control cabinets, High,
Honda FIT/HR-V (Silao, Guanajuato medium and low voltage cabinets, Start-up, PLC
NISSAN (Puebla, Puebla) and HMI programming, Support for Production
Skills:
Control Tools
Allen Bradley • EPLAN
• RSLogix 5000, RsLogix 500, Studio 5000 • Vision System Cognex In Sight (Spreadsheet),
• FactoryTalk View Dataman, Keyence IV.
• RSLinx y RSNetWorx • Atlas Copco torque tool.
SIEMENS • Servo drives (Sew), Frequency Inverter
• Step 7 (Altivar PowerFlex), Soft Starter (SMC
• TIA Portal Flex, Altistar).
• WinCC Flexible • Managed Industrial Switches, NAT,
Routers, Access Point.
Programming languages • Knowledge and development in
• PLC: Ladder, Structure Text (ST) network topologies.
Function Blocks (FBD). • Controller Weld Medar, Lincon, Bosch.
• Java, C#, C++. • IO Modules Balluff, Murr, Turck, Pepperl and
• Develop Android Application for Fuchs.
• DSC Robot Fanuc.
Industry IIOT.
• Conveyors, Gantrys, Lift Assist.
Industrial Networks • Safety Modules, Pilz, Sick,
• Devicenet, Ethernet/IP, Profibus,Profinet, Keyence, Turck (curtains,
ASI, Serial y Modbus. scanners Safety y safety relays).
• Develop System Scada.
Schneider Electric
• SmartStructure (BMS)
Trainings:
Languages
Ingles Intermediate
Spanish Native