Professional Documents
Culture Documents
The Supports application creates supports across four disciplines: Structural, Piping, Electrical and HVAC,
and it is possible that one of the disciplines could inadvertently corrupt a support in some way. The Health
Check Utility checks for the existence of any problems.
Separate checks are performed for ancillaries, structural supports, hangers and trunnions. Ancillaries which
are part of structural supports (For example, pipe shoes) are checked as part of the structural supports,
using the ancillary checking method.
After the health check is carried out, the results can be displayed on the screen or exported to an excel file.
Ancillaries
Supports
Hangers
Trunnions
The Support Health Check Utility will run automatically when clicking Apply on the Support Editor form to
finish the support creation procedure.
It also can be run by clicking on the Health Check button in the Tools group on the SUPPORTS tab.
After clicking on this button, the user is prompted to ‘Pick Support to be checked or <ESC> to finish’.
Supports can be selected from the 3D view or from the Model Explorer.
After finishing the selection and pressing the <ESC> key the Support Health Check Utility form is
displayed.
The Support Health Check Utility window allows the user to select the elements to check and run a health
check.
Add Supports Click to add supports below the currently selected element in the hierarchy to the
support list.
By Pick Click to add a support to the support list using a cursor pick in the 3D view.
Check The Check button will run the health check for all loaded supports into the list.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
132
AVEVA Everything3D™ (2.1)
Supports TM-1818
• Support List
• Errors Messages
• Warning Messages
Support Name
Description
The grid entries may be grouped, sorted and filtered to suit the user’s requirements.
The grids in this tab has a right click pop-up menu which has the
following options.
Check Selected Support The user can check the selected supports only
Remove Items from list Remove selected support in the support list
Export to Excel This option opens the Save Drawlist As browser, enabling the grid contents
to be saved to a .xls file
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
133
www.aveva.com
All rights reserved.
AVEVA Everything3D™ (2.1)
Supports TM-1818
Support Name
If any errors are detected the Support is considered to be incomplete and the Support Editor Form cannot
be closed. Therefore the user is forced to return to the Support Editor form to rectify the reported errors
before being allowed to exit the creation form.
Any warnings or messages that compromise the health check of the support should be rectified in order for
the support to be considered as complete. However the user has the option in this case to exit the support
creation form and return at a later date to modify the support.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
www.aveva.com
All rights reserved.
134
AVEVA Everything3D™ (2.1)
Supports TM-1818
1. Using the above as an example, check the supports in the current model.
Copyright © 2015.
AVEVA Solutions Limited and its subsidiaries.
135
www.aveva.com
All rights reserved.