You are on page 1of 2

Quiz :Answer all these questions

1. What is the meaning of Data Communication?


a. Transferring of digital information between two or more points.
b. Transferring of analog information between two or more points.
c. Transferring of analog and digital data between two or more
points.
d. Transferring of digital data between one or more points.

2. Which of the following is not a primary type of data communications?


a. Telephone
b. Teletype
c. Telegraph
d. Teleconference

3. Which equipment that adapt the digital signals from the computer and
terminals to a suitable form for transmission.
a. Host Computer
b. Transmission medium
c. DCE
d. DTE

4. How half duplex data flows?


a. Data flows in only one direction on the data communication
line.
b. Data flows in both directions simultaneously
c. Data flows in both directions but only one direction at a time
d. Data flows in one direction but only two directions at a time.

5. Where the ways to transfer binary information from one place to another?
a. Serial
b. Parallel
c. Synchronous and Asynchronous
d. serial and parallel

6. How parallel data transmission?


a. One wire for all bit of information to be transmitted.
b. One wire for each bit of information to be transmitted.
c. Two wire for each bit of information to be transmitted
d. One wire for each bit of information to be received.

7. What is the main reason that serial transmission is preferred to parallel


transmission?
a. serial is faster.
b. serial requires only a single channel.
c. serial requires multiple channels.
d. parallel requires multiple channels.

8. Which cable that is the most popular and is generally the best option for
school networks?
a. UTP
b. TP
c. STP
d. Coaxial Cable

9. Basic networking hardware that are commonly used in a data


communications system except?
a. Computers
b. Peripherals
c. Interface cards
d. Transmitter.

10. Components that are needed in a data communications network except?


a. Outstations
b. Network Interface Cards
c. Concentrators/Hubs, and
d. Repeaters

11. What is the meaning of Baud?


a. The rate of change at the output of the modulator
b. The rate of change at the input of the modulator
c. The rate of still at the output of the modulator
d. The rate of still at the input of the modulator.

12. A modem contains both _______________ and


_________________circuits.
13. Modems convert___________ signals to ____________ signals and vice
versa.
14. The transmission medium most widely used with modems is
the___________________________.
15. Modems are the interface between ________________.

You might also like