Professional Documents
Culture Documents
E n Franç ais
DIN TECHNICAL INFORMATION
DUPLEX paired bearings
DUPLEX bearings consist of an assembly of two PAIRED bearings which provide the
following advantages:
These assembly configurations are used for applications where no bearing clearance
can be tolerated and where a high degree of stiffness of the whole assembly is
required.
Paired bearings are packed two by two according to their arrangement (O or X). It is
very important not to separate them while unpacking.
O arrangement (back-to-back)
The load lines diverge towards the bearing axis thus providing a greater abutment
distance and consequently a great degree of stiffness of the whole assembly. The O
arrangement accepts axial and radial loads acting in both directions.
X arrangement (face-to-face)
The load lines diverge towards the bearing axis thus providing a shorter abutment
distance and a lower angular stiffness of the whole assembly. The X arrangement is
less sensitive to misalignments and accepts axial and radial loads acting in both
directions.
Bac k to
T ec hnic al I nformation M enu