Professional Documents
Culture Documents
DOC#: PGB/OGP-CA-A28-20B2-03
End Bearing, Qb = fb . Ab
Unit base resistance fb = 0.4 x N x D in ton /m^2 =< q1 = 40N for sand
B = 30N for silt fs
where : = 10N for clay
N = avg. SPT value from borelogs
B = width or diameter of pile = 0.15 m
L or D = depth of pile penetration into soil layer
Ab = area of base pile = 0.023 m^2
As = surface area of embed. length = 0.600 m^2
fb
fn = unit negative skin friction = 0.8 ton/m^2
Negative skin friction = fn x As x L
e.g Avg N = N1+N2+N3+…
n
MAX. STRUCTURAL CAPACITY OF PILE : 0.25*fcu*A= 168.75 kN
TAKE WORKING LOAD OF PILE : 26 ton or 260 kN
Ultimate Pile Capacity, Qult = 4.05 ton < 65 ton i.e 2.5 * Qstr. O.K
Therefore,
Total pile length required = 42 m
STRUCTURAL DESIGN PAGE :
DOC#: PGB/OGP-CA-A28-20B2-03
pilecap