Professional Documents
Culture Documents
Page 1
Galvafroid
Limitations additional skin protection. In case of contact with skin, rinse
with plenty of clean water, then cleanse with soap and
Galvafroid is formulated for application to clean ferrous water. Do not use Solvent. In case of contact with eyes,
substrates and should not be used on rust, corroded rinse immediately with plenty of clean water and seek
surfaces. medical advice. If swallowed, seek medical attention
immediately - do not induce vomiting.
Galvafroid should not be applied over existing coatings.
Fire
Galvafroid should not be used on surfaces in contact with
drinking water. Galvafroid and Fosroc Solvent 102 are flammable. Keep
away from sources of ignition. No smoking. In the event of
Galvafroid should not be used on surfaces exposed to soft fire, extinguish with CO 2 or foam. Do not use a water jet.
o
water at temperatures above 60 C.
Flash points
Galvafroid should not be used on surfaces treated with o
phosphoric acid based rust removers. Galvafroid: 41 C
o
Fosroc Solvent 102: 33 C
Galvafroid should not be overcoated with materials
containing strong solvent such as chlorinated and aromatic For further information, refer to the Product Safety Data
hydrocarbons, esters and ethers. Sheet.
Important note:
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard Conditions
for the Supply of Goods and Services, copies of which may be obtained on request. Whilst Fosroc endeavours to ensure that
any advice, recommendation, specification of information it may give is accurate and correct, it cannot, because it has no direct
or continuous control over where or how its products are applied, accept any liability either directly or indirectly arising from the
use of its products, whether or not in accordance with any advice, specification, recommendation of information given by it.
Registered Office: Industrial Area, Phase 4, Road No. 414, Street No. 407
Page 2 FO SA/GALVAFROID/05/A