The KWQ-4/5M gas analyzer is used to measure the concentrations of HC, CO, CO2, O2, and optionally NO and engine speed/oil temperature in vehicle exhaust. It uses NDIR and electrochemical sensors with accuracy meeting ISO and OIML standards. The analyzer automatically calculates air-fuel ratio, has data storage and input functions, and can integrate with additional devices. It measures for gasoline, LPG and CNG vehicles with flexible probes and has functions like auto-zero and leak check.
The KWQ-4/5M gas analyzer is used to measure the concentrations of HC, CO, CO2, O2, and optionally NO and engine speed/oil temperature in vehicle exhaust. It uses NDIR and electrochemical sensors with accuracy meeting ISO and OIML standards. The analyzer automatically calculates air-fuel ratio, has data storage and input functions, and can integrate with additional devices. It measures for gasoline, LPG and CNG vehicles with flexible probes and has functions like auto-zero and leak check.
The KWQ-4/5M gas analyzer is used to measure the concentrations of HC, CO, CO2, O2, and optionally NO and engine speed/oil temperature in vehicle exhaust. It uses NDIR and electrochemical sensors with accuracy meeting ISO and OIML standards. The analyzer automatically calculates air-fuel ratio, has data storage and input functions, and can integrate with additional devices. It measures for gasoline, LPG and CNG vehicles with flexible probes and has functions like auto-zero and leak check.
KWQ-4/5M Gas Analyzer engine speed and oil temperature can be measured. This equipment is used to ignite the engine The sampling channel loading filtration exhaust measurement, measurement object system, efficient separation of oil and for the discharge of exhaust HC, CO, CO2, water in the exhaust gas and impurities O2, and NO concentration. The technical from the sample gas sampling requirements of the specifications, features, channels into line with the detection of and performance of the equipment meets high-precision sampling platform the ISO3930、OIML R99 and JJG688 related requirements, in order to ensure provisions, the detection accuracy level measurement accuracy and stability. reached Ⅰ. Applicable to a simple transient The device can automatically conditions (Vmas) and steady-state calculate and display the engine air- conditions (ASM) system equipment for fuel ratio λ value (lambda), providing measurement of GB18285、HJ/T289 condition automatic zeroing, license plate equipment and technology required to meet number, input and time display the special analysis instruments. function, provides smart search function of 500 measurement data storage and access to and license plate number. The motorcycle test mode. It has the functions with auto zero, auto calibration and leak check. Standard RS232 interface to facilitate the detection line networking, data transfer and print statements. Can be integreated with 2 more equipment by VIS Control System. Built-in printer.
Main Features:
For Gasoline, LPG, CNG Cars.
LCD display operation menu. It is easy to operate. The device uses the non-dispersive Optional infrared absorption principle (NDIR) the Trolley Stand use of imported the HORIBA optical platform measuring CO, HC, CO2 concentration; using electrochemical sensors measuring O2, NO concentration Flexible probe can suit almost all kinds tail tube. The device comes standard with speed, oil temperature interface 1.1 Gas Analyser KWQ-4/5M Specifications: Complete Set:
Environmental Condition Display unit
Temperature: 0-40 °C Built-in mini printer Relative Humidity: ≤90% Sample tube and probe Supply Voltage: AC 220V ±10%, 50±1Hz Power cable Measurement Range Filter-filter CO: 0.00 - 16.00 User’s manual CO2: 1.00 - 18.00 Certificate Warranty HC: 0 - 9999 Trolley stand (Optional) O2: 0 - 25.00 NO: 0 – 5000 (Optional) Resolution CO: 0.01 CO2: 0.1 HC: 1 O2: 0.02 NO: 1 (Optional) Response Time HC, CO, CO2: 10s O2: 12s NO: 15s (Optional) Weight: Approx. 8.5 kg