Professional Documents
Culture Documents
MODEL C21B
PERFORMANCE DATA
HEAVY MEDIUM LIGHT NIL
Abrasion Zones
500 100 50 20 10 2 1
Viscosity Limits (Stokes)
6 1.5 230
212
PSI
MARK 5
176
Temperature (°F)
MARK 3 0
116 140
174
MARK 1 104
MARK 0 68
4 1.0
32
Pump Capacity (m³/h)
Pump Capacity (gpm)
2 0.5
1.2 1.6
Absorbed Power (kW)
1.0
0.9
n = corrected duty speed, no = rpm @ 0 PSI, np = rpm @ duty press.
SLIP ns = Slip Speed = np - no, f x ns = Slip Speed Correction = f.n s
CORRECTION 0.8
Slip Corrected Speed (n = n p - f.ns)
0.7
SLIP FACTOR (f)
TEST Above data represents tests on water @ 68°F using RR and RA 0.6
PARAMETERS stator materials.
0.5
0.4
0.3
0.2
SOLIDS HANDLING (Inches) STARTING TORQUE (ft-lb)
0.1
Soft and
Hard Angular compressible Mark 0 Mark 1 Mark 3 Mark 5 0
1 10 100 1000
0.14 0.40 5.9 5.2 5.2 5.2 VISCOSITY IN PUMP (CENTISTOKES)
Published information other than that marked certified is to be used as a guide only
PUMP COMPACT SECTION 2
MODEL C21B PAGE C21B02
STATUS CURRENT DATE NOV 2006
GENERAL DATA
VISCOSITY ADDITIVES PUMP N.P.S.H(R) CURVE
10000 5
POWER
STARTING ADDITIVE SIZE 1
TORQUE
1000
4
3
(Stokes)
10
2
1
Refer to Section 2 on 1
0.1
how to use this graph
0.01 0
1 2 3 4 5 6 7 0 2 4 6
Correction Factor Pump Capacity (m³/h)
0 0.5 1 1.5
Pump Capacity (gpm)
Maximum 70°C (158°F) 130°C (266°F) 110°C (230°F) 110°C (230°F) 150°C (300°F)
Performance Yes Yes –
None None None
De-rating Max 1500rpm see Section 1
Food
Yes Yes Yes Yes No
Approved
COMMENTS Specified temperatures are for continuous conditions. Refer to Section 1 for de-rating guidelines.
Published information other than that marked certified is to be used as a guide only
PUMP RANGE COMPACT SECTION 2
MODEL C21B PAGE C21B03
STATUS CURRENT DATE NOV 2006
GENERAL DATA
FITTINGS INLET (For clarification the INLET is defined as the port nearest the gland section of the pump)
DESIGN SPECIFICATION
NB
BODY
mm ORIENTATION OPTION STANDARD OPTION
MATERIAL
(inch)
Cast Iron
- Vertical Can be rotated 1 ¼” B.S.P. 1 ¼” N.P.T.
St. Steel
COMMENTS NB – Nominal Bore
FITTINGS OUTLET (For clarification the OUTLET is defined as the port furthest from the gland section of the pump)
DESIGN SPECIFICATION
NB
BODY
mm ORIENTATION OPTION STANDARD OPTION
MATERIAL
(inch)
Cast Iron
- Horizontal Can be rotated 1 ¼” B.S.P. 1 ¼” N.P.T.
St. Steel
COMMENTS NB – Nominal Bore
SEALING ARRANGEMENT
PUMP SIZE SHAFT DIAMETER STANDARD MECHANICAL SEAL OPTIONAL PACKED GLAND
Published information other than that marked certified is to be used as a guide only