You are on page 1of 1

Soil Ic Normalised Soil Shear Strength

qc & Rf Settlement & Cyclic Strain FOSCL&CS & State Parameter Liquefaction
Layers
0 5 10 15 20 1.31 2.05 2.60 2.95 3.60 0 50 100 150 200 250 0.0 0.1 0.2 0.3 0.4 0.0 0.5 1.0 1.5 2.0
0 0

0 0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0


0

0 0 0 6.0

5 5

5 5 5

5 5 5 1.0

Relative Level (mRL)


10 10

10 10 10 10 10 -4.0

Depth (m)
10

Depth (m)

Depth (m)
Depth (m)
Depth (m)

15 15

15 15 15

15 15 15 -9.0

20 20

20 20 20

20 20 20 -14.0

25 25

25 25 25

25 25 25 -19.0

30 30

30 30 30

30 30 30 -24.0
-0.25 0.00 0.25 0.50 0.75 0.00 0.25 0.50 0.75 1.00 -0.5 0.0 0.5
State Parameter
U2 3b Bq Liquefaction
Densification and Liquefaction (mm) Normalised Liquefaction Residual Shear Strength (I&B, 2007) FOS Cyclic Liquefaction (I&B, 2008) Depths (I&B,
qc (Cone Resistance in MPa) Ic (soil behaviour index) FOS cyclic softening (I&B 2007) 2008)
Ground Water Level
Rf (Friction Ratio in %) Normalised Cyclic Softening Residual Shear Strength (I&B, 2007) Sensitive Soil (Ic>2.6 and F<1.0) Liquefaction
Bq (Pore Water Pressure Ratio) Cyclic Strain (mm) Ground Water Level Depths (I&B,
U2 (Pore Water Pressure in MPa)
FOS Cyclic Liquefaction (I&B, 2014) 2014)
Ground Water Level Ground Water Level State Parameter

Ic < 1.31 (gravelly sand to dense sand)


1.31 < Ic < 2.05 (clean sand to silty sand) Ground and Groundwater
2.05 < Ic < 2.60 (silty sand to sandy silt)
CPT ID: CPT 54251 Analysis Method
2.60 < Ic < 2.95 (clayey silt to silty clay)
2.95 < Ic < 3.60 (silty clay to clay) Ground Level 6 mRL I&B 2014
Ic > 3.60 (organic soils) Water Level 2 mBGL
Cut/Fill 0m Seismic Settlement
Ground Shaking & Analysis Parameters CPT Test
Assumed Representative Magnitude 7.50 Depth CPT 21 m
I&B 2014 180 mm
Unscaled Peak Ground Acceleration 0.35 g Qc Zero Drift Observed 0.2497 MPa
Magnitude Scaling Factor Fs Zero Drift Observed 0.0700 MPa Cumulative Cyclic Strain
Ic Cut-off Value 2.60 Cone Area Ratio 0.8 NCEER 195 mm
Note: Overburden and OCR effects on CRR
considered ----

CPT Interpretation and Seismic Analysis Summary


Path: C:\Users\Michael.Tran\Desktop\[64 Kilmore_CPT_54251.xlsm]Report Sheet I&B 14_ I&B 08

You might also like