Professional Documents
Culture Documents
Air consumption
Special actuators 6
Turning range 180° • 3-position 90°/180° • Speed control • Fail safe position • SC 180° (spring return)
Accessoiries 7
Limit switch kit • Multifunction indicator • Adaptors • Centerings • Block and Lock
Brass design
DN 1/4” - DN 2” double and single acting
Accessories
Appendix 12
Certificate of Approval • GOST
Classification of Ships and Mobile Off Shore Units
Advantages
of the ALODUR coating:
extremely abrasion resistant,
low surface roughness, optimal resistance
4 The connections - ISO 5211, DIN 3337 (F03-F25), VDI/VDE 3845 (Size 0 to 4)
ISO 1 (CNOMO) and NAMUR for flexible usability and exchangeability.
Technical details
The tooth profile, and so the way of force, for the used rack and
pinion principle was optimized through the involute gearing.
The new multifunction indicator for 4th Generation actuators (2. Line).
The multifunction indicator
The new indicator is suitable for 45° or 90° position (s. a.). A visual indicati-
on is realized through coloured inserts (white) in the (red) indicator. The ins-
erts are variable to fit.
The indicator has a VDI/VDE-interface. So mostly every standard attache-
ment can be mounted without problems.
With this new Multifunctionindicator nearly the most of the possibilities with common switches
are easily and variable to mount. And all this with the standard cams !
Example for
Plastic insert for mechanical
standard indication or
Metal insert for sensors IFM sensors
Size
DR/SC00015
to Example for
DR/SC00150 proximity
switches
(P+F, TURCK
etc...)
Example for
multiport valve
Plastic insert for
indication
possible plugs for the mechanical
indication of switches, variabel
multiport valves upgradeable with a
metal pin for sensors
Note: Indicators for the actuator sizes DR/SC00220 to DR/SC05000 Ø85 / Ø115 see page 0706/0707 --->
Piston
The Advantages of the 4th Generation • corrosion-resistant
• backlash-free transmission
Multifunction-indicator through involute curve
• adjustment in 45°-steps possible 19 • milling cutted tooth profile
• prepared for double proximity sensor 18
• variable plug system 10 30
Body 8
• anticorrosion coating A-B-C-D-E-P
• DIN/ISO 5211, VDI/VDE 3845, NAMUR 31
• New Edge design End cap
• anticorrosion coating
Piston guiding 50 A-B-C-D-E-P
5 11
• 3-way guiding • handsome shape,
• optimized bearing surface compact
• serial application 15 • New Edge design
4
up to 150 °C 3
2
External stroke
13 9 8 adjustment
40 1 • optimal serviceability
42 16 for adjustment
Spring cartridge 21 Octi-cam ‘OPEN + CLOSED’
17 6
• safe mounting • ideal transmission of • ‘block and lock’
14 • spring force through forces through poly- possibility (optional)
variation adjustable gon connection • adjustable ±4°
Fig. DR01:
Fig. DR02: Top view and principle of a double acting actuator under pressure Principle of a doubleacting actuator
If the port ‘4’ is under pressure and the port ‘2’ evacuated, the pistons are moving into the middle position.
This also has as result a turning of the drive shaft (a turning of the drive shaft in its opposite is possible through
a turned mounting of the pistons).
With rack and pinion construction the output torque of an actuator is obtained by multiplying the piston force
(given by air supply pressure) by the pitch shaft radius (lever arm) as shown in fig. DR03 less the force lost for
friction (efficiency). Because of this concept, the output torque is linear as shown in the diagram DR04 in both
clockwise and counterclockwise rotation.
The suggested safety factor for double acting actuators in normal working conditions is 15-20%.
Torque MD
[Nm] M D, Actuator
Pressure
hw
Fig. DR03: Top view of a double acting actuator Fig. DR04: Principle of the torque
under pressure (double acting)
The double acting AT actuator that produces a minimum of 48 Nm at 5 bar is the DR60.
MD
[Nm] M D, DR00060
48
Safety factor
40
First case:
hw
w==wirksamer
lever armHebelarm
(effective) MD
The output torque is generated by air supply [Nm]
pressure at port ‘2’ after compressing the Drehmoment M D, Air pressure
springs, called ‘output torque air stroke’. In Luftdruck
this case air forces the pistons from the 0° to
the 90° position and consequently the torque
hw
AT spring return actuators are designed to produce a balanced torque in the two conditions explained
above when the number of springs per side is equal to the air pressure supply (4 bar - 4 springs each side) as
shown in the diagram SC07.
For certain applications it is possible to achieve (where desired), the unbalanced torque, as shown in dia-
gram SC08, by changing the relation between the number of springs per side and air pressure supply in bar
(for example 6 springs and 5,5 bar or vice versa).
In spring return applications two conditions can be archieved: air failure to close or failure to open.
The suggested safety factor for spring return actuators in normal working conditions is 20-25%.
The spring return AT actuator selected is the SC300 - 5, because it produces the following values:
Safety factor
Valve torque
0∞ Rotation [∞] 90∞
Diagram SC07: Principle of balanced torque
The spring return AT actuator selected is the SC150 - 5, because it produces the following values:
Safety factor
Valve torque
0∞ Rotation [∞] 90∞
Diagram SC08: Principle of unbalanced torque
Salt spray test: no. SAC/655/98 Classification of ships: DET NORSKE Nr. P-11231
Kesternich test: no. SAC/299/98 GOST: no. 1148552, 4433326, PPC 02-4409
Salt spray testt: Nr. SAC/656/98 Classification of ships: DET NORSKE Nr. P-11231
Kesternich test: Nr. SAC/300/98 GOST: Nr. 1148552, 4433326, PPC 02-4409
Salt spry test: no. SAC/890/96 Classification of ships: DET NORSKE Nr. P-11231
Kesternich test: no. SAC/896/96 GOST: no. 1148552, 4433326, PPC 02-4409
This coating is achieved through a special method, which uses a special surface treatment with brushing and
Process
sandblasting followed by an electrochemical oxidation of the aluminium surface. Add. the body is PTFE coated.
Optimal corrosion resistance, through PTFE coating highest chemical resistance, PTFE has a wide range of
Advantages temperature application.
In connection with the standard hard anodation the inside surface roughness was reduced about 40%.
Salt spray test: no. SAC/886/96 Classification of ships: DET NORSKE Nr. P-11231
Kesternich test: no. SAC/897/96 GOST: no. 1148552, 4433326, PPC 02-4409
This coating is achieved through a special method, which uses a special surface treatment with brushing and
Process
sandblasting followed by an electrochemical oxidation of the aluminium surface. Add. the body is PTFE coated.
Optimal corrosion resistance, through PTFE coating highest chemical resistance, PTFE has a wide range of
Advantages
temperature application. With stainless steel drive shaft optimal chemical resistance.
Salt spray test: no. SAC/304/98 Classification of ships: DET NORSKE Nr. P-11231
Kesternich test: no. SAC/301/98 GOST: no. 1148552, 4433326, PPC 02-4409
Air Torque has developed a new line of forged stainless steel actuators with material traceability. This new
line of stainless steel actuators has been designed to be used in corrosive environment by using forged
high quality stainless steel body material in A 182 F316/ EN 10088/3 1.4401.
These actuators are manufactured in Double acting and Spring Return versions.
The stainless steel actuators are also available with optional polished surface, particulary for Sanitary and
Pharmaceutical applications.
The new line of stainless steel actuators offers a lot of innovative design features and benefits like:
OPTIONS
The body is special hard anodized (ALODUR), inside as The maintainance free springs allow a safe and sim-
well as outside. Additional the body is Epoxy coated. ple assembly and disassembly. The adaptation of
The end caps are chromatized and Epoxy coated. the AT - actuators to your working conditions with the
recommended pneumatic pressure can so be arran-
External seviceable travel stops for open and close ged. The conversion of a double acting to a spring
position allow a fine adjustment of ± 4°. This special fea- return actuator can be easily managed. Only the
ture eliminates alignment problems due to a clearance necessary springs have to be mounted. This advan-
of connections between the stem of the valve adaptor tage of AT - actuators reduces stocking costs signifi-
and the shaft of the actuator. cantly.
Due to a triple bearing of the piston all actuators have Silicon free:
a constant torque, even under high load. Beside the All actuators are silicon free according to the auto-
guides on the outside of the piston there is an additio- mobile industry recommendations.
nal guide inside which absorbs the cross load through Exception: High and low temperature actuators
the integrated support at the drive shaft.
Serial inspection:
Each actuator has to pass a comprehensive serial
inspection with e.g. a tightness / density check and
a torque check. After passing the inspection the
actuator is given a serial number according to ISO
9001.
Test certificate:
example of layout DR900 at 5,5bar air supply -> 842Nm output torque
3/4 5,3 3,1 6,9 4,8 8,6 6,5 9,2 7,1 6,8 4,7 5 8,2 5,2 9,9 6,9 11,5 8,5 13,2 10,2 19,8 16,8 9,7 6,7
4 6,2 3,8 7,9 5,5 8,6 6,2 7,8 5,4 5/6 9,2 5,9 10,9 7,6 12,5 9,2 19,2 15,9 10,7 7,4
4/5 7,2 4,5 7,9 5,2 8,8 6,1 6 10,2 6,6 11,9 8,2 18,5 14,9 11,7 8,1
2/3 9,1 6,2 12 9,2 15 12,1 17,9 15 19,1 16,2 8,4 6 4 15,7 11,1 17,5 12,9 20,4 15,8 23,4 18,7 26,3 21,7 13,5 9
3 8 4,5 10,9 7,5 13,9 10,4 16,8 13,3 18 14,5 10,1 7 4/5 15 9,4 16,4 11,2 19,3 14,1 22,3 17,1 25,2 20 36,9 31,7 15,2 10
00030
3/4 9,8 5,8 12,8 8,7 15,7 11,6 16,9 12,8 11,8 7,8 5 15,3 9,5 18,2 12,4 21,1 15,4 24,1 18,3 35,8 30 16,9 11,1
4 11,6 7 14,6 10 15,7 11,1 13,5 9 5/6 17,1 10,8 20 13,7 23 16,6 34,7 28,3 18,6 12
4/5 13,5 8,3 14,6 9,4 15,2 10 6 18,9 12 21,9 14,9 33,6 26,7 20,2 13,3
2/3 18 11,8 23,8 17,6 29,7 23,4 35,5 29,9 37,8 31,6 17,3 11,1 4 31,2 21,2 34,7 24,7 40,5 30,5 46,3 36,8 52,1 42,1 27,7 17,7
3 15,8 8,3 21,6 14,1 27,5 19,9 33,3 25,8 35,6 28,1 20,8 13,3 4/5 29 17,7 32,5 21,2 38,3 27 44,1 32,8 49,9 38,6 73,2 61,9 31,2 19,9
00060
3/4 19,4 10,7 25,2 16,5 31,1 22,3 33,4 24,6 24,2 15,5 5 30,2 17,7 36,1 23,6 41,9 29,4 47,7 35,2 71 58,5 34,6 22,1
4 23 13 28,8 18,8 31,2 21,2 27,7 17,7 5/6 33,8 20,1 39,7 25,9 45,5 31,7 68,7 55 38,1 24,3
4/5 26,2 15,4 29 17,7 31,2 19,9 6 37,5 22,4 43,3 28,3 66,5 51,5 41,5 26,5
2/3 27,4 16,9 36,6 26 45,7 35,2 54,9 44,3 58,5 48 28,9 18,3 4 47,5 30,7 53 36,2 62,2 45,3 71,3 54,5 80,5 63,6 46,2 29,3
3 23,8 11,1 32,9 20,3 42,1 29,4 51,2 38,6 54,9 42,2 34,7 22 4/5 43,9 24,9 49,4 30,4 58,5 39,5 67,7 48,7 76,8 57,8 113 94,5 52 33
00100
3/4 29,2 14,5 38,4 23,6 47,5 32,8 51,2 36,4 40,4 25,7 5 45,7 24,6 54,8 33,8 64 42,9 73,1 52,1 110 88,7 57,8 36,7
4 34,7 17,9 43,9 27 47,5 30,7 46,2 29,3 5/6 51,2 28 60,3 37,1 69,5 46,3 106 82,9 63,5 40,3
4/5 40,2 21,2 43,9 24,9 52 33 6 56,7 31,4 65,8 40,5 102 77,1 69,3 44
2/3 41,1 27,1 54,4 40,4 67,7 53,7 81 67 86,3 72,3 39,4 25,3 4 71,1 48,7 79,1 56,6 92,4 69,9 106 83,2 119 96,5 63 40,5
3 36,1 19,2 49,4 32,5 62,7 45,8 76 59,1 81,3 64,4 47,3 30,4 4/5 66 40,8 74 48,8 87,3 62,1 101 75,3 113,9 88,6 167 142 70,9 45,6
00150
107 62,6
3/4 44,3 24,6 57,6 37,9 70,9 51,2 76,2 56,5 55,1 35,5 5 69 40,9 82,3 54,2 95,6 67,5 109 80,8 162 134 78,8 50,7
4 52,5 30 65,8 43,3 71,1 48,7 63 40,5 5/6 77,2 46,3 90,5 59,6 104 72,9 157 126 86,7 55,7
4/5 60,8 35,5 66,1 40,8 70,9 45,6 6 85,4 51,7 99 65 152 118 94,5 60,8
2/3 66,5 41,9 87,9 63,4 109 84,9 131 106 140 115 65,5 41 4 115 75,7 128 88,6 149 110 171 132 192 153 105 65,6
3 58,3 28,8 79,7 50,3 101 71,8 123 93,3 131 102 78,6 49,2 4/5 107 62,6 120 75,5 141 97 163 118 184 140 270 226 118 73,8
00220
3/4 71,5 37,2 93 59 115 80,2 123 88,8 91,7 57,4 5 111 62 133 83,9 154 105 176 127 262 213 131 82
4 84,8 45,6 106 67,1 115 75,7 105 65,6 5/6 125 71 146 92,3 168 114 254 200 144 90,2
4/5 98,1 54 107 62,6 118 73,8 6 138 79 159 101 245 187 157 98,4
2/3 86 56,1 114 83,8 141 111 169 139 180 150 82,4 52,5 4 149 101 165 117 193 145 221 173 248 201 132 84
3 75,5 39,6 103 67,3 131 95 159 123 170 134 98,9 63 4/5 138 84,3 155 101 182 129 210 156 238 184 349 295 148 94.5
00300
3/4 93 50,8 120 78,5 148 106 159 117 115 73,5 5 144 84 172 112 200 140 227 168 338 278 165 105
4 110 62 138 89,7 149 101 132 84 5/6 161 96 189 123 217 151 328 262 181 116
4/5 127 73,3 138 84,3 148 94,5 6 179 107 206 135 317 245 198 126
2/3 135 88,6 179 132 222 176 265 219 283 236 129 82.4 4 233 159 260 185 303 229 347 272 390 316 206 132
3 119 63 162 106 206 150 249 193 266 211 155 99 4/5 217 133 243 159 287 203 330 246 374 290 547 464 232 148
00450
3/4 146 80 189 124 233 167 250 185 180 115 5 227 134 270 177 314 221 357 264 531 438 258 165
4 173 98 216 142 233 159 206 132 5/6 254 151 297 195 341 238 515 412 283 181
4/5 200 116 217 133 232 148 6 281 169 324 213 498 386 309 198
2/3 171 118 228 174 285 231 342 288 364 310 166 112 4 297 211 331 245 388 302 444 358 501 415 266 180
3 149 84 206 141 262 198 319 255 342 277 199 135 4/5 275 178 309 212 365 268 422 325 479 382 706 609 299 202
00600
3/4 183 108 240 165 297 221 319 244 233 157 5 286 178 343 235 400 292 456 349 683 575 332 224
4 218 131 274 188 297 211 266 180 5/6 320 202 377 259 434 315 661 542 365 247
4/5 252 155 275 178 299 202 6 355 225 411 282 638 509 399 269
2/3 225 146 301 223 378 299 455 376 485 406 237 158 4 390 264 436 310 513 387 589 464 666 540 379 253
3 193 99 270 175 346 252 423 329 454 359 284 190 4/5 359 217 405 263 481 340 558 416 634 493 941 799 426 285
00900
3/4 238 128 315 205 391 281 422 312 332 221 5 373 216 450 292 526 369 603 445 909 752 474 316
4 283 157 360 234 390 264 379 253 5/6 418 245 495 321 571 398 877 704 521 348
4/5 328 186 359 217 426 285 6 463 274 540 351 846 657 568 379
2/3 319 217 426 323 532 430 638 536 681 578 315 213 4 553 390 617 453 723 560 830 666 936 772 504 340
3 277 154 383 260 489 367 596 473 638 515 378 255 4/5 511 327 575 390 681 497 787 603 894 709 1319 1135 567 383
01200
3/4 341 197 447 304 553 410 596 453 441 298 5 532 327 638 434 745 540 851 646 1277 1072 630 425
4 404 241 511 347 553 390 504 340 5/6 596 371 702 477 809 583 1234 1009 693 468
4/5 468 284 511 327 567 383 6 660 414 766 520 1192 946 756 510
2/3 533 372 712 551 890 730 1069 908 1141 980 521 360 4 924 667 1032 774 1210 953 1389 1132 1568 1310 834 577
3 461 268 640 447 818 625 997 804 1068 876 625 433 4/5 852 563 959 670 1138 849 1317 1028 1495 1206 2210 1921 938 649
02000
3/4 568 343 746 521 925 700 996 771 730 505 5 887 566 1066 745 1245 923 1423 1102 2138 1817 1042 721
4 674 417 853 596 924 667 834 577 5/6 994 640 1173 819 1351 998 2066 1713 1146 793
4/5 781 491 852 563 938 649 6 1101 715 1279 894 1994 1608 1251 865
2/3 751 496 1011 755 1270 1015 1529 1274 1633 1378 801 546 4 1306 897 1461 1053 1721 1312 1980 1571 2239 1831 1281 873
3 642 336 902 595 1161 854 1420 1114 1524 1217 961 655 4/5 1197 737 1352 893 1612 1152 1871 1411 2130 1671 3168 2708 1442 982
03000
3/4 793 435 1053 694 1312 954 1415 1057 1121 764 5 1245 732 1504 992 1763 1251 2023 1510 3060 2548 1602 1091
4 943 534 1202 793 1306 897 1281 873 5/6 1395 832 1654 1091 1914 1350 2951 2388 1762 1200
4/5 1093 633 1197 737 1442 982 6 1545 931 1805 1190 2842 2228 1922 1309
2/3 1332 1014 1783 1465 2233 1915 2684 2365 2864 2546 1238 920 4 2312 1803 2582 2073 3033 2524 3483 2974 3934 3424 1981 1472
3 1149 767 1599 1217 2049 1667 2500 2118 2680 2298 1486 1104 4/5 2128 1555 2398 1825 2849 2276 3299 2726 3750 3177 2229 1656
05000
3/4 1415 969 1865 1420 2316 1870 2496 2050 1733 1288 5 2215 1578 2665 2028 3115 2479 3566 2929 2476 1839
4 1682 1172 2132 1623 2312 1803 1981 1472 5/6 2481 1781 2931 2231 3382 2682 2724 2023
4/5 1948 1375 2128 1555 2229 1656 6 2748 1983 3198 2434 2971 2207
F/S springs/side recommended size SC600-5/6 at 5,5bar air supply -> 377Nm bei 0°, 259Nm bei 90°; max. spring torque 365Nm at 90°
(end cap) (symmetric) 247Nm at 0° (lower than air torque). Important for fail save closed/-opened layout
22.5
45
re
4
°
ØZ M6x10
ua
H
Sq
45°
Q1
20 20
B
Port '2' Port '4' Type DR/SC03000/05000
20
W1 W M6x10
"X"
P
L
VDI/VDE 3845
"X" T Connection I
D 22.5
A M N
20
R
) C C
O are 230
u
S ( Sq
B
Type DR/SC03000 Type DR/SC05000
h1
G
h
205
Ød M6x12
F M N M N
00015 00030 00060 00100 00150 00220 00300 00450 00600 00900 01200 02000 03000 05000 10000
Type
DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC
ISOFlange (F03) F04 F05-07 F05-07 F05-07 F07-10 F07-10 F07-10 F10-12 F10-12 (F12) F14 (F12) F14 (F14) F16 (F14) F16 F16-25 F16-25-30
ISOFlange* F04 F05 F05 F07 F07 F10 F10 F12 F12 F14 F14 F16 F16 F25 F30
Square (9) 11 (11) 14 14 (17) 17 17 (22) 22 22 (27) 27 27 (27) 36 (27) 36 (36) 46 (36) 46 (46) 55 (55) 75
T-ISO228 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 1/2" 1/2" 1/2"
A 140.5 158.5 210.5 247.5 268.5 315 345 408.5 437.5 487 543 621 728 876 856
515**
B 69 85 102 115 127 145 157 177 196 220.5 245 298.5 330 410 525
C 59 72 84.5 97.5 111 127 136 156.5 169 190.7 213 251 298.5 383
D M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M6x10 M6x10 M6x10 M6x10
E 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8
F 80 80 80 80 80 80 80 80 80 130 130 130 130 130 200
G 30 30 30 30 30 30 30 30 30 30 30 30 30 30 50
H 20 20 20 20 20 30 30 30 30 50 50 50 50 50 80
min
I (25) 30 (30) 35 35 55 55 70 70 85 85 100 100 130 130 200 230
L 12 16 16 19 19 24 24 29 29 38 38 48 48 57 77
M 29 36 42.5 49.5 56 64 69.5 80 88 99 110 131 163.5 204 -
N 41.5 47 52 56.8 67 77 82 91.5 99 105 112 131 166 214 -
O 11 11 17 17 17 27 27 27 27 36 36 36 36 36 36
P 26.5 30 30.5 32.5 37.5 42.5 45 47 52 58 62 78.5 165 185 185
Q* (36) 42 (42) 50 50 50 70 70 70 102 102 140 140 165 165 254 298
Q1* - - 70 70 102 102 102 125 125 - - - - - -
R 32 32 32 32 32 32 32 32 32 32 32 45 45 45 45
S 24 24 24 24 24 24 24 24 24 24 24 40 40 40 40
W* M5 (M5) M6 M6 M6 M8 M8 M8 M10 M10 M16 M16 M20 M20 8xM16 8xM20
(A)
W1* - - M8 M8 M10 M10 M10 M12 M12 - - - - - -
h1 max(A)
ød f8 30 35 35 55 55 70 70 85 85 100 100 130 130 200 230
h min
2 3 3 3 3 3 3 3 3 4 4 5 5 5 5
0.5 0.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2.5 2.5 2.5 2.5
øZ 40 40 40 40 40 56 (65) 56 (65) 65 65 80 (115) (80) 115 115 115 115 115
* Protection C, D, E, P only one flange (bold printed); (A) and data in brackets -> on request;
C ØZ
C
Ø Z1
4
h
L
Type DRSC03000 DS Port '4'
Port '2'
B
X
P
M N
Detail " X "
A M N
L
Detail " Y "
C
e)
M5xE
Bottom View - ISO5211 VDI/VDE 3845
ar
qu
(S
45°
e
D
Sq
r
ua
sq
D
e
bl
B
ou
Q1
45°
G
D
W
Type DRSC05000 DS
R
M6x12 Q
S
Detail " X "
W1
X
M N F
00015 00030 00060 00100 00150 00220 00300 00450 00600 00900 01200 02000 03000 05000 10000
Type
DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC DR/SC
ISOFlange (F03) F04 F05-07 F05-07 F05-07 F07-10 F07-10 F07-10 F10-12 F10-12 (F12) F14 (F12) F14 (F14) F16 (F14) F16 (F16) F25 (F25) F30
ISOFlange* F04 F05 F05 F07 F07 F10 F10 F12 F12 F14 F14 F16 F16 F25 F30
DSQ (9) 11 (11) 14 14 (17) 17 17 (22) 22 22 (27) 27 27 (27) 36 (27) 36 (36) 46 (36) 46 (46) 55 (55) 75
T-ISO228 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 1/4" 3/8" 1/2" 1/2" 1/2"
A 140.5 158.5 210.5 247.5 268.5 315 345 408.5 437.5 487 543 621 728 876 856
515**
B 69 85 102 115 127 145 157 177 196 220.5 245 298.5 330 410 525
C 59 72 84.5 97.5 111 127 136 156.5 169 190.7 213 251 298.5 383
D M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M5x8 M6x10 M6x10 M6x10 M6x10
E 4 8 8 8 8 8 8 8 8 8 8 8 8 8 8
F 80 80 80 80 80 80 80 80 80 130 130 130 130 130 200
G 30 30 30 30 30 30 30 30 30 30 30 30 30 30 50
H 20 20 20 20 20 30 30 30 30 50 50 50 50 50 80
I (25) 30 (30) 35 35 55 55 70 70 85 85 100 100 130 130 200 230
L min 12 16 16 19 19 24 24 29 29 38 38 48 48 57 77
M 29 36 42.5 49.5 56 64 69.5 80 88 99 110 131 163.5 204 -
N 41.5 47 52 56.8 67 77 82 91.5 99 105 112 131 166 214 -
O 11 11 17 17 17 27 27 27 27 36 36 36 36 36 36
P 26.5 30 30.5 32.5 37.5 42.5 45 47 52 58 62 78.5 165 185 185
Q* (36) 42 (42) 50 50 50 70 70 70 102 102 140 140 165 165 254 298
Q1* - - 70 70 102 102 102 125 125 - - - - - -
R 32 32 32 32 32 32 32 32 32 32 32 45 45 45 45
S 24 24 24 24 24 24 24 24 24 24 24 40 40 40 40
W* M5 (M5) M6 M6 M6 M8 M8 M8 M10 M10 M16 M16 M20 M20 8xM16 8xM20
W1* - - M8 M8 M10 M10 M10 M12 M12 - - - - - -
ød f8 (A) 30 35 35 55 55 70 70 85 85 100 100 130 130 200 230
h1 max(A) 2 3 3 3 3 3 3 3 3 4 4 5 5 5 5
h min 0.5 0.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2 2 2.5 2.5 2.5 2.5
øZ1 13.5 13.5 21 21 21 35 35 35 35 46 46 46 46 46 46
øZ 40 40 40 40 40 56 (65) 56 (65) 65 65 80 (115) (80) 115 115 115 115 115
* Protection C, D, E, P only one flange (bold printed); (A) and data in brackets -> on request;
30/31 17 01 06 19 13 30 18 39 03 02
21 10
04
14 50 08 11
40
42
15 16
07 20 60 41 43 12 05 09
M6xO M5xD
ØZ 39
P
M L
G
19
21
18
04
08a
08 16 F
13 14 45°
VK
09 Detail " X " 11
45°
10
oC
03
W
02 Q
12
11a 22
G1/8" ISO228-1
41 01 Port '4'
ØH Detail " Y " M5xE
05
h
B
I
A
S Port '2'
4x4
G1/8" ISO228 -1 Ø 40 Flange Dimensions
ISO 5211 F03 F04
Port '2' Port '4' d2 f8 - 30
20
15
d3 36 42
d4 M5x8 M5x8
I - 30
Akt. 9 11
L min. 10 12
4 h min. 0.5 0.5
66
16
h1 - 1.5
Pressure Conn. B1
16
AA 0
33
Anc. Attachment
2 25
h1
12 12 I
M5x8
118 26.5 35.5
Ød2 f8
h
F04
M
5x
M6x12
8
kt Double square
A
d4
ROTATION
45°
25
ua
90°
Sq
H
45°
stroke
50 0°
-0.5°
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 6,0 7,2 8,4 9,6 10,1 10,8 12,0 13,2 14,4 16,8 19,1 - 0,75
End Start
SC 4 4,9 2,0 6,1 3,2 6,6 3,7 7,3 4,4 6,4 3,5 0,88
SC 5 6,6 2,8 7,8 4,0 9,0 5,2 10,2 6,4 8,0 4,2 0,89
SC 6 8,2 3,6 9,4 4,8 11,8 7,2 14,1 9,5 9,6 5,0 0,90
Max. Rotation Screw Chamber Air volume (L) Moving time (sec.) (B) Operating temperature (C)
Pressure (A) adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° on request DR 0,15 DR 0,20 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 45 0,06 0,10
(-0,5° / +1°) for OPEN SC 0,20 SC 0,25 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) Rotation for standard actuator: 91,5°, +1° in OPEN position (CCW for standard) and -0,5° in CLOSE position (CW for standard), rotation for actuator with
external stroke adjustment: 94,5°, 90° +4° adjustable in OPEN position (CCW for Standard) and -0,5° in CLOSE position (CW for standard).
(B) The above indicated moving time of the actuator are obtained in the following test conditions: (1) Room temperatur, (2) actuator stroke90°, (3) solenoid
valvewith Ø 4 mm and a flow capacity Qn 400 L/min., (4) inside pipe Ø 8 mm, (5) medium clean air, (6) air supply pressure 5,5 bar (79,75 Psi), (7) actuator
without external resistance load.
Attention: obviosly on the field applications when one or more of the above parameter are different, the moving time will be different.
(C) For HT (high temperature) and LT (low temperature) services, a special lubricant is requested.
Operating Medium:
The operating medium must be free of dust and oil. The maximum particle size must not exceed 30µm (ISO 8573 Part1, Class5). In order to prevent water
condensation and/or solidification (ice, when actuator work below 0°C), the operating medium must have a dew point equal to –20°C or at least 10°C
below the ambient temperature (ISO 8573 Part1, Class3).
Flange Dimensions
20
69
Port '4'
Square 9 11
16 16
L min. 10 12
26.5
L
12 12 G1/8" ISO228 -1 I Pressure Connection PC 1
Ancillaries Attachment AA 1
140.5 29 41.5
h1
45
°
re
h
M5x4
ua
Sq
11
Ød f8
45°
30
Q1 W1
h1
M6x12
h
80 Ød f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 8,3 10 11,6 13,3 14 15 16,6 18,3 19,9 23,3 26,6 - 1,0
End Start
SC 2/3 4,9 3,4 6,6 5,1 8,3 6,8 9,9 8,4 10,6 9,1 11,6 10,1 13,2 11,7 14,9 16,6 19,9 23,2 4,9 3,4 1,0
SC 3 4,3 2,5 5,9 4,1 7,6 5,8 9,3 7,4 9,9 8,1 10,9 9,1 12,6 10,8 14,2 12,4 15,9 19,2 22,5 5,8 4 1,0
SC 3/4 3,6 5,3 3,1 6,9 4,8 8,6 6,5 9,2 7,1 10,2 8,1 11,9 9,8 13,6 11,5 15,2 13,1 18,5 21,9 6,8 4,7 1,0
SC 4 4,6 6,2 3,8 7,9 5,5 8,6 6,2 9,6 7,2 11,2 8,8 12,9 10,5 14,6 12,1 17,9 15,5 21,2 7,8 5,4 1,0
SC 4/5 3,9 5,6 7,2 4,5 7,9 5,2 8,9 6,2 10,6 7,8 12,2 9,5 13,9 11,2 17,2 14,5 20,5 17,8 8,8 6,1 1,0
SC 5 4,9 6,6 6,4 8,2 5,2 9,9 6,9 11,5 8,5 13,2 10,2 16,5 13,5 19,8 16,8 9,7 6,7 1,0
SC 5/6 5,9 5,8 7,5 9,2 5,9 10,9 7,6 12,5 9,2 15,9 12,5 19,2 15,9 10,7 7,4 1,1
SC 6 6,9 8,5 10,2 6,6 11,9 8,2 15,2 11,6 18,5 14,9 11,7 8,1 1,1
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,2 DR 0,3 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 50 0,1 0,2
at 0° and 90° 1/6 turn SC 0,3 SC 0,3 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Flange Dimensions
20
85
Port '4'
Square 11 14 17
16 16
L min. 12 16 19
h min. 0,5 0,5 1,5
30
h1 2 2 -
L
12 12 G1/8" ISO228 -1 Pressure Connection PC 1
I
Ancillaries Attachment AA 1
158.5 36 47
h1
45
°
re
h
M5x8
ua
Sq
Ød2 f8
11
45°
30
Q1 W1
h1
M6x12
h
80 Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 14,7 18 20,5 23,5 25 26 29,3 32,0 35,2 41,0 46,9 - 1,6
End Start
SC 2/3 9,1 6,2 12,0 9,2 15,0 12,1 17,9 15,0 19,1 16,2 20,8 17,9 23,8 20,9 26,7 35,5 41,4 8,4 5,5 1,6
SC 3 8,0 4,5 10,9 7,5 13,9 10,4 16,8 13,3 17,0 18,0 19,7 16,3 22,7 19,2 25,6 22,1 34,4 40,2 10,1 7 1,6
SC 3/4 6,9 9,8 5,8 12,8 8,7 15,7 11,6 16,9 12,8 18,6 14,6 21,5 17,5 24,5 20,4 27,4 23,4 33,3 39,1 11,8 7,8 1,6
SC 4 8,7 11,6 7,0 14,6 10,0 15,7 11,1 17,5 12,9 20,4 15,8 23,4 18,7 26,3 21,7 32,2 27,5 38,0 13,5 8,9 1,6
SC 4/5 7,6 10,5 13,5 8,3 14,6 9,4 16,4 11,2 19,3 14,1 22,3 17,1 25,2 20,0 31,1 25,9 36,9 31,7 15,2 10,0 1,7
SC 5 9,4 12,4 15,3 15,3 9,5 18,2 12,4 21,1 15,4 24,1 18,3 29,9 24,2 35,8 30,0 16,9 11,1 1,7
SC 5/6 11,2 11,2 14,2 17,1 10,8 20,0 13,7 22,0 16,6 28,8 22,5 34,7 28,3 18,6 12,2 1,7
SC 6 13,1 15,0 18,9 12,0 21,9 14,9 27,7 20,8 33,6 26,7 20,2 13,3 1,7
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,3 DR 0,3 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 63 0,2 0,3
at 0° and 90° 1/6 turn SC 0,3 SC 0,4 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
ØZ
Standard flange: F05+F07
4x4 84.5 Available flange: F05
Flange Dimensions
20
102
I 35 35
Port '2' Port '4' Square 14 17
16 16
L min. 16 19
30.5
L
h1 2 -
12 12 G1/8" ISO228 -1 I Pressure Connection PC 1
h1
45
°
re
h
ua
M5x8
17
Sq
Ød2 f8
45°
30
Q1 Spigot optional
W1
M6x12
80
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 29,1 35 40,7 46,5 49 52 58,2 64 69,8 81,4 93,1 - 2,7
End Start
SC 2/3 18,0 11,8 23,8 17,6 29,7 23,4 35,5 29,2 37,8 31,6 41,3 35,0 47,1 40,9 52,9 70,4 82,0 17,3 11,1 2,9
SC 3 15,8 8,3 21,6 14,1 27,5 19,9 33,3 25,8 35,6 28,1 39,1 31,6 44,9 37,4 50,7 43,2 68,2 79,8 20,8 13 2,9
SC 3/4 13,6 19,4 10,7 25,2 16,5 31,1 22,3 33,4 24,6 36,9 28,1 42,7 33,9 48,5 39,8 54,3 45,6 65,0 77,6 24,2 15,5 2,9
SC 4 17,2 23,0 13,0 28,8 18,8 31,2 21,2 34,7 24,7 40,5 30,5 46,3 36,3 52,1 42,1 63,7 53,7 75,4 27,7 17,7 3,0
SC 4/5 15,0 20,8 26,6 15,4 28,0 17,7 32,5 21,2 38,3 27,0 44,1 32,8 49,9 38,6 61,5 50,3 73,2 61,9 31,2 19,9 3,0
SC 5 18,6 24,4 26,8 30,2 17,7 36,1 23,6 41,9 29,4 47,7 35,2 59,3 46,8 71,0 58,5 34,6 22,1 3,1
SC 5/6 22,2 24,7 28,0 33,8 20,1 39,7 25,9 45,5 31,7 57,1 43,4 68,7 55,0 38,1 24,3 3,1
SC 6 25,8 31,6 37,5 22,4 43,3 28,3 54,9 39,9 66,5 51,5 41,5 26,5 3,2
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,3 DR 0,4 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 75 0,3 0,5
at 0° and 90° 1/6 turn SC 0,4 SC 0,5 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Flange Dimensions
20
M5x8 I 40 55
115
Port '2' Port '4' Square 17 17
16 16
L min. 19 19
32.5
L
h1 - 2
h1
45
°
re
h
ua
M5x8
17
Sq
Ød2 f8
45°
30
Q1 Spigot optional
W1
M6x12
80
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 46 55 64 73 77 82 92 101 110 128 146 - 3,8
End Start
SC 2/3 27,4 16,9 36,6 26,0 45,7 35,2 54,9 44,3 58,5 48,0 64,0 53,5 73,2 62,6 82,3 91,5 109,8 128,1 28,9 18,3 4,0
SC 3 23,8 11,1 32,9 20,3 42,1 29,4 51,2 38,6 54,9 42,2 60,4 47,7 69,5 56,9 78,7 66,0 87,8 106,1 124,4 34,7 22 4,1
SC 3/4 20,1 29,2 14,5 38,4 23,6 47,5 32,8 51,2 36,4 56,7 41,9 65,8 51,1 74,0 60,2 84,2 69,4 102,5 120,8 40,4 25,7 4,2
SC 4 25,6 34,7 17,9 43,9 27,0 47,5 30,7 53,0 36,2 62,2 45,3 71,3 54,5 80,5 63,6 98,8 81,9 117,1 46,2 29,3 4,2
SC 4/5 21,9 31,1 40,2 21,2 43,9 24,9 49,4 30,4 58,5 39,5 67,7 48,7 76,8 57,8 95,1 76,1 113,4 94,5 51,0 33 4,2
SC 5 27,4 36,5 41,7 45,7 24,6 54,8 33,8 63,0 42,9 73,1 52,1 91,5 70,4 109,8 88,7 57,8 36,7 4,3
SC 5/6 32,9 38,7 42,0 51,2 28,0 60,3 37,1 69,5 46,3 87,8 64,6 106,1 82,9 63,5 40,3 4,3
SC 6 38,4 47,5 56,7 31,4 65,8 40,5 84,1 58,8 102,4 77,1 69,3 44 4,4
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,4 DR 0,5 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 88 0,5 0,8
at 0° and 90° 1/5 turn SC 0,5 SC 0,6 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Flange Dimensions
20
127
M5x8
Square 17 17 22
Port '2' Port '4'
L min. 19 19 24
16 16
h1 - 2 -
L
Pressure Connection PC 2
12 12 G1/4" ISO228 -1 I Ancillaries Attachment AA 1
268.5 56 67
h1
45
°
re
h
ua
M5x8
17
Sq
Ød2 f8
45°
30
Q1 Spigot optional
W1
M6x12
80
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 66,5 80 93,1 106 112 120 133 146 160 186 213 - 5,4
End Start
SC 2/3 41,1 27,1 54,4 40,4 67,7 53,7 81,0 67,0 86,3 72,3 94,3 80,3 107,6 93,6 120,9 134,2 160,8 187,4 39,4 25,3 5,9
SC 3 36,1 19,2 49,4 32,5 62,7 45,8 75,0 59,1 81,3 64,4 89,3 72,4 102,5 85,7 115,8 99,0 129,1 155,7 182,3 47,3 30,0 5,9
SC 3/4 31,0 44,3 24,6 57,6 37,9 70,9 51,2 76,2 56,5 84,2 64,5 97,5 77,8 110,8 91,1 124,1 104,4 150,7 177,2 55,1 35,5 6,0
SC 4 39,2 52,5 30,0 65,8 43,3 71,1 48,7 79,1 56,6 92,4 69,9 105,7 83,2 119,0 96,5 145,6 123,1 172,2 63,0 40,5 6,1
SC 4/5 34,2 47,5 60,8 35,5 66,1 40,8 74,0 48,8 87,3 62,1 100,6 75,3 113,9 88,6 140,5 115,2 167,1 141,8 70,9 45,6 6,2
SC 5 42,4 55,7 63,1 69,0 40,9 82,3 54,2 95,6 67,5 108,9 80,8 135,5 107,4 162,0 133,9 78,8 50,7 6,3
SC 5/6 50,6 58,3 63,9 77,2 46,3 90,5 59,6 103,8 72,9 130,4 99,5 156,0 126,1 86,7 55,7 6,3
SC 6 58,8 72,1 85,4 51,7 98,7 65,0 125,3 91,6 151,9 118,2 94,5 60,8 6,5
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,5 DR 0,6 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 100 0,7 1,1
at 0° and 90° 1/5 turn SC 0,7 SC 0,9 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
d2 f8 55 70
Q1 70 102
W1 M8x12 M10x15
I 55 70
Square 17 22
145
M5x8
Port '2' Port '4' L min. 19 24
16 16
h1 2,5 2
Position Indicator Z=56*
L
Pressure Connection PC 2
12 12 G1/4" ISO228 -1 I
Ancillaries Attachment AA 2
315 64 77 *for open mounting Z = 65
h1
45
°
re
h
ua
M5x8
27
Sq
Ød2 f8
45°
30
Q1
W1
h1
M6x12
80 h Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 107 129 150 172 181 193 215 236 258 301 344 - 8.4
End Start
SC 2/3 66,5 41,9 87,9 63,4 109,4 84,9 131 106,4 140 115,0 152 127,9 174 149,4 195 216,9 259,9 302,9 65,5 41,0 9,0
SC 3 58,3 28,8 79,7 50,3 101,2 71,8 122 93,3 131 101,9 144 114,8 166 136,3 187 157,8 208,7 251,7 294,7 78,6 49,2 9,1
SC 3/4 50,1 71,5 37,2 93,0 58,7 115 80,2 123 88,8 136 101,7 158 123,3 179 144,7 200 166,2 243,5 286,5 91,7 57,4 9,2
SC 4 63,3 84,8 45,6 106 67,1 115 75,7 128 88,6 149 110,1 171 131,6 192 153,1 235,3 196,0 278,3 105 65,6 9,4
SC 4/5 55,1 76,6 98 54,0 107 62,6 120 75,5 141 97,0 163 118,5 184 140,0 227,1 182,9 270,1 225,9 118 73,8 9,5
SC 5 68,4 89,9 98 111 62,4 133 83,9 154 105,4 176 126,9 218,9 169,8 261,9 212,8 131 82,0 9,6
SC 5/6 81,7 90 103 125 70,8 146 92,3 168 113,8 210,7 156,7 253,7 199,7 144 90,2 9,7
SC 6 95 116 138 79,2 159 100,7 202,5 186,6 245,5 186,6 157 98,4 9,8
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,7 DR 0,8 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 115 1,2 1,8
at 0° and 90° 1/5 turn SC 0,9 SC 1,1 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
d2 f8 55 70
Q1 70 102
W1 M8x12 M10x15
I 55 70
Square 22 22 27
157
M5x8
Port '2' Port '4' L min. 19 24 29
16 16
L
Pressure Connection PC 2
12 12 G1/4" ISO228 -1 I
Ancillaries Attachment AA 2
345 69.5 82 *for open mounting Z = 65
h1
45
°
re
h
ua
M5x8
27
Sq
Ød2 f8
45°
30
Q1
W1
h1
M6x12
h
80 Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 138 166 194 222 233 249 277 305 332 388 443 - 10.2
End Start
SC 2/3 85 56 113 84 141 111 169 139 180 150 197 167 224 195 252 279 335 390 82 53 11,2
SC 3 75 40 103 67 130 67 159 123 170 134 186 150 214 178 242 206 269 324 380 99 63 11,4
SC 3/4 64 92 51 120 79 148 106 159 117 176 134 203 162 231 189 259 217 314 369 115 74 11,6
SC 4 82 109 62 138 90 149 101 165 117 193 145 221 173 248 201 304 256 359 131 84 11,8
SC 4/5 71 99 127 73 138 84 155 101 182 129 211 156 238 184 293 239 349 295 148 95 12,0
SC 5 88 116 127 144 84 171 112 200 140 227 168 283 223 338 278 165 105 12,2
SC 5/6 106 117 133 161 96 189 123 217 151 272 206 328 262 181 116 12,4
SC 6 123 150 179 107 206 135 262 190 317 245 198 126 12,6
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 0,9 DR 1,1 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 125 1,5 2,3
at 0° and 90° 1/4 turn SC 1,2 SC 1,4 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
d2 f8 70 85
Q1 102 125
W1 M10x15 M12x18
I 70 85
177
M5x8 Square 27 27
Port '2' Port '4' L min. 29 29
16 16
h1 3 2
L
Position Indicator Z=65
12 12 G1/4" ISO228 -1 I Pressure Connection PC 2
h1
45
°
re
h
ua
M5x8
27
Sq
Ød2 f8
45°
30
Q1
W1
h1
M6x12
80 h Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 217 261 304 348 365 391 435 478 522 609 696 - 14.5
End Start
SC 2/3 135 89 178 132 222 176 265 219 283 236 309 262 352 306 395 439 526 613 128 82 16,0
SC 3 118 63 162 106 205 150 249 193 266 211 293 237 336 280 379 324 422 509 596 154 99 16,3
SC 3/4 102 145 80 189 124 233 167 250 185 276 211 320 254 363 298 406 341 493 580 180 115 16,6
SC 4 129 173 98 216 142 233 159 260 185 303 229 347 272 390 316 477 403 563 206 132 16,9
SC 4/5 112 156 200 116 217 134 243 159 287 203 330 246 374 290 460 377 547 464 232 148 17,2
SC 5 139 183 200 227 134 270 177 314 221 357 264 444 351 531 438 258 165 17,5
SC 5/6 166 184 210 254 151 297 195 341 238 428 325 515 412 283 181 17,8
SC 6 193 237 281 169 324 213 411 299 498 386 309 198 18,1
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 1,2 DR 1,4 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 145 2,4 3,8
at 0° and 90° 1/4 turn SC 1,5 SC 1,8 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Flange Dimensions
EN 12116 F10 F12
30
d2 f8 70 85
Q1 102 125
W1 M10x15 M12x18
I 70 85
196
M5x8 Square 27 27
Port '2' Port '4'
L min. 29 29
16 16
h1 3 2
L
Position Indicator Z=65
12 12 G1/4" ISO228 -1 I Pressure Connection PC 2
88 99 Ancillaries Attachment AA 2
437.5
h1
45
°
re
h
ua
M5x8
27
Sq
Ød2 f8
45°
30
Q1
W1
h1
M6x12
80 h Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 284 340 397 454 477 511 567 624 681 794 908 - 19.8
End Start
SC 2/3 171 118 228 174 285 231 342 288 364 310 398 344 455 401 511 568 681 795 166 112 21,6
SC 3 149 84 206 141 262 198 319 255 342 277 376 311 433 368 489 425 546 659 772 199 135 21,9
SC 3/4 126 183 108 240 165 297 221 319 244 353 278 410 335 467 391 524 448 637 750 233 157 22,3
SC 4 160 218 131 274 188 297 211 331 245 388 302 444 358 501 415 615 528 728 266 180 22,6
SC 4/5 138 195 252 155 275 178 309 212 365 268 422 325 479 382 592 495 706 609 299 202 23,0
SC 5 172 229 252 286 178 343 235 400 292 456 349 570 462 683 575 332 224 23,3
SC 5/6 206 229 308 320 202 377 259 434 315 547 429 661 542 365 247 23,7
SC 6 241 297 355 225 411 282 525 396 638 509 399 269 24,0
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 1,5 DR 1,7 NBR "O"-Ring FPM "O"-Ring Silicon "O"-Ring
8 bar 160 3,1 4,9
at 0° and 90° 1/4 turn SC 1,8 SC 2,1 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with Orifice Of 4 mm and a flow capacity Qn 400 L/min., (4) Inside pipe diameter 8 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
d2 f8 85 100
Q1 125 140
W1 M12x18 M16x24
I 85 100
220.5
M5x8 Square 27 36
Port '2' Port '4' L min. 29 38
16 16
h min. 2 2
58
h1 2 3
L
Position Indicator Z=80*
Pressure Connection PC 2
12 12 G1/4" ISO228 -1 I
Ancillaries Attachment AA 4
487 99 105
*for open mounting Z = 115
h1
45
°
re
h
ua
M5x8
36
Sq
Ød2 f8
45°
30
Q1 Spigot optional
W1
M6x12
130
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 383 459 536 613 643 689 766 842 919 1072 1225 - 25
End Start
SC 2/3 225 146 301 223 378 299 455 376 485 406 531 452 608 529 684 760 914 1067 237 158 27,8
SC 3 193 99 270 175 346 252 423 329 454 359 500 405 576 482 653 558 729 882 1035 284 190 28,3
SC 3/4 238 128 315 205 391 281 422 312 468 358 544 434 621 511 698 587 850 1003 332 221 28,9
SC 4 283 157 360 234 390 264 436 310 513 387 589 464 666 540 819 693 972 379 253 29,4
SC 4/5 328 186 359 217 405 263 481 340 558 416 634 493 788 646 941 799 426 285 29,9
SC 5 373 216 450 292 526 369 603 445 756 599 909 752 474 316 30,5
SC 5/6 418 245 495 321 571 398 724 551 877 704 521 348 31,1
SC 6 463 274 540 351 693 504 846 657 568 379 31,6
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 2,0 DR 2,2 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 180 4,3 6,9
at 0° and 90° 1/4 turn SC 2,4 SC 2,8 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
d2 f8 85 100
Q1 125 140
W1 M12x18 M16x24
I 85 100
Square 27 36
245
M5x8
Port '2' Port '4' L min. 29 38
16 16
h min. 2 2
62
h1 2 3
L
Position Indicator Z=80*
G1/4" ISO228 -1 Pressure Connection PC 2
12 12 I
Ancillaries Attachment AA 4
543 110 112
*for open mounting Z = 115
h1
45
°
re
h
ua
M5x8
36
Sq
Ød2 f8
45°
30
d3
d4
h1
M6x12
130 h Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 532 638 745 851 893 957 1064 1170 1276 1489 1702 - 35.5
End Start
SC 2/3 319 217 426 323 532 430 638 536 681 578 745 642 851 749 957 1063 1276 1489 315 213 39,5
SC 3 277 154 383 260 489 367 596 473 638 515 702 579 808 686 915 792 1021 1233 1446 378 255 40,3
SC 3/4 234 341 197 447 304 553 410 596 453 660 516 766 623 872 729 979 835 1191 1404 441 298 41,1
SC 4 297 404 241 511 347 553 390 617 453 723 560 830 666 936 772 1149 985 1361 504 340 41,9
SC 4/5 255 361 468 284 511 327 575 390 681 497 787 603 894 709 1106 922 1319 1135 567 383 42,7
SC 5 319 425 468 532 327 638 434 745 540 851 646 1064 859 1276 1072 630 425 43,5
SC 5/6 383 425 489 596 371 702 477 809 583 1021 796 1234 1009 693 468 44,3
SC 6 446 553 660 414 766 520 979 733 1191 946 756 510 45,1
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 2,7 DR 3,2 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 200 5,9 9,5
at 0° and 90° 1/4 turn SC 3,5 SC 4,0 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Flange Dimensions
EN 12116 F16 F14
50
d2 f8 130 100
Q1 165 140
W1 M20x30 M16x24
I 130 100
22.5
298.5
Square 46 36
M6x10
Port '2' L min. 48 38
Port '4'
h min. 2,5 2,5
22.5
78.5
h1 4 4
Position Indicator Z=115
L
Pressure Connection PC 3
20 20 G3/8" ISO228 -1 I Ancillaries Attachment AA 4
h1
45
°
re
h
ua
36
M5x8
Sq
Ød2 f8
45°
30
Q1
W1
h1
M6x12
130 h Ød2 f8
Spigot optional
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 893 1072 1251 1430 1501 1608 1787 1966 2144 2502 2859 - 53
End Start
SC 2/3 533 372 712 551 890 730 1069 908 1141 980 1248 1087 1426 1266 1605 1783 2141 2498 521 360 54,4
SC 3 461 268 640 447 818 625 997 804 1068 876 1175 983 1354 1162 1533 1340 1711 2069 2426 625 433 55,8
SC 3/4 388 568 343 746 521 925 700 996 771 1104 879 1282 1057 1461 1236 1640 1415 1997 2354 730 505 57,2
SC 4 495 674 417 853 596 924 667 1032 774 1210 953 1389 1132 1568 1310 1925 1668 2282 834 577 58,6
SC 4/5 423 602 781 491 852 563 959 670 1138 849 1317 1028 1495 1206 1853 1564 2210 1921 938 649 60,0
SC 5 529 708 780 887 566 1066 745 1245 923 1423 1102 1781 1459 2138 1817 1042 721 61,4
SC 5/6 636 708 815 994 640 1173 819 1351 998 1709 1355 2066 1713 1146 793 62,8
SC 6 743 921 1101 715 1279 894 1637 1251 1994 1608 1251 865 64,2
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 3,5 DR 4,0 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 240 10,0 15,2
at 0° and 90° 1/4 turn SC 4,1 SC 4,6 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Flange Dimensions
EN 12116 F16 F14
50
d2 f8 130 100
Q1 165 140
M6x10
Port '2'
W1 M20x30 M16x24
I 130 100
Port '4'
20 20
330
Square 46 36
L min. 48 38
22.5 22.5 h min. 2,5 2,5
165
h1 4 4
L
Z=115
G1/2" ISO228 -1
Position Indicator
I
Pressure Connection PC 4
45
M5x8 °
h1
re
h
ua
36
Sq
Ød2 f8
45°
30
M6x12
Q1
W1 Spigot optional
130
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 1297 1556 1815 2075 2179 2334 2594 2853 3112 3631 4150 - 83
End Start
SC 2/3 751 496 1011 755 1270 1015 1529 1274 1633 1378 1789 1533 2048 1793 2307 2566 3085 3604 801 546 91,0
SC 3 642 336 902 595 1161 854 1420 1114 1524 1217 1680 1373 1938 1632 2198 1892 2457 2976 3495 961 655 92,6
SC 3/4 533 792 435 1052 694 1311 954 1415 1057 1570 1213 1830 1472 2089 1732 2348 1991 2867 3385 1121 764 94,2
SC 4 683 943 534 1202 793 1306 897 1461 1053 1721 1312 1980 1571 2239 1831 2758 2350 3276 1281 873 95,8
SC 4/5 574 833 1093 633 1197 737 1352 893 1612 1152 1871 1411 2130 1671 2649 2189 3168 2708 1442 982 97,4
SC 5 724 983 1087 1243 732 1503 992 1761 1251 2021 1510 2540 2029 3059 2548 1602 1091 99,0
SC 5/6 874 978 1134 1393 832 1653 1091 1912 1350 2431 1869 2950 2388 1762 1200 100,6
SC 6 1024 1284 1544 931 1803 1190 2322 1709 2840 2228 1922 1309 102,2
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 4,0 DR 4,5 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 265 14,5 21,4
at 0° and 90° 1/4 turn SC 4,5 SC 5,0 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
ØZ Std. 115
Standard flange: F16
Available flange: F25 / F16+F25
4x4
185.5
Flange Dimensions
PORT '2' EN 12116 F16 F25 F16+F25
50
d2 f8 130 200 NA
PORT '4'
Q1 165 254 165 254
45
M20x30 (F16)
G1/2" ISO228 -1
40
W1 M20x30 M16x24 M16x24 (F25)
M6x10 I 130 200 NA
383
Square 46 55 46 55
311
L min. 48 57 48 57
h min. 2,5 2,5 2,5
L
I
h1 5 4 NA
h1
only on request
h
Ød2 f8
F16 and F25
F16 + F25 (optional) F25 (optional)
45° 45° F16
re
re
W1
ua
ua
M5x8
re
Sq
ua
Sq
36
Sq
45°
45°
M6x12 Q1 W1 Q1
30
130
Q1
45°
W1 45°
22,5° 22,5° 22,5° 22,5°
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 1795 2154 2513 2872 3015 3231 3590 3949 4308 5026 5744 - 123
End Start
SC 2/3 1064 703 1423 1062 1782 1421 2141 1780 2284 1924 2500 2139 2859 2498 - 1092 731 136
SC 3 918 485 1277 844 1636 1203 1995 1562 2138 1706 2354 1921 2713 2280 3072 2639 - 1310 877 139
SC 3/4 1131 626 1489 985 1848 1344 1992 1487 2207 2321 2566 2062 2925 2421 3284 2780 - 1528 1023 142
SC 4 1343 766 1702 1125 1846 1269 2061 1484 2420 1843 2779 2202 3138 2561 3856 3279 - 1746 1170 144
SC 4/5 1556 907 1700 1051 1915 1266 2274 1625 2633 1984 2992 2343 3710 3061 4428 3779 1965 1316 147
SC 5 1769 1048 2128 1407 2487 1766 2846 2125 3564 2843 4282 3560 2183 1462 150
SC 5/6 1982 1188 2341 1547 2700 1906 3418 2624 4135 3342 2401 1608 152
SC 6 2194 1329 2553 1688 3271 2406 3989 3124 2620 1754 155
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 5,0 DR 6,0 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 300 20 33
at 0° and 90° 1/4 turn SC 6,0 SC 7,0 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
d2 f8 200 130
Q1 254 165
W1 M16x24 M16x24
I 200 130
M6x10
410
PORT '4'
Vierkant 55 46
20
L min. 57 58
PORT '2'
h min. 2,5 2,5
20
205
22.5 h1 4 4
185
L
Pressure Connection PC 4
I Ancillaries Attachment AA 4
G1/2" ISO228 -1
876 204 214
45
h1
°
re
ua
36
M5x8
h
Sq
45°
Ød2 f8
M6x12 W1
30
22.5° 22.5°
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 2252 2703 3153 3604 3784 4054 4504 4955 5405 6306 - 134
End Start
SC 2/3 1332 1014 1783 1465 2233 1915 2684 2365 2864 2546 3134 2816 3585 3266 - 1238 920 148
SC 3 1149 767 1599 1217 2049 1667 2500 2118 2680 2298 2950 2568 3401 3019 3851 3469 - 1486 1104 151
SC 3/4 1415 969 1865 1420 2316 1870 2496 2050 2766 2321 3217 2771 3667 3222 4118 3672 - 1733 1288 154
SC 4 1682 1172 2132 1623 2312 1803 2582 2073 3033 2524 3483 2974 3934 3424 4837 3993 - 1981 1472 157
SC 4/5 1948 1375 2128 1555 2398 1825 2849 2276 3299 2726 3750 3177 4648 3698 - 2229 1656 160
SC 5 2215 1578 2665 2028 3115 2479 3566 2929 4458 3403 - 2476 1839 163
SC 5/6 2481 1781 2931 2231 3382 2682 4269 3107 - 2724 2023 166
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
90° ±4° For 1° DR 6,0 DR 7,0 NBR "O"-Ring FPM "O"-Ring Silikon "O"-Ring
8 bar 330 25 40
at 0° and 90° 1/4 turn SC 7,5 SC 8,5 - 20°C to + 80°C - 15°C to + 150°C - 40°C to + 80°C
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
600
I 230 200
20
Akt 75 75 / 55
L min. 77 77 / 57
20
258
237
Stellungsanzeige Z=115
22.5
AA5
Luftanschluss B4
L
Zubehöranschluss AA4 - a.A mit
Port '2' Adapterplatte
45 I
G1/2" ISO228 -1
kt
d4
950
A
250 275
d4
F16 + F25 + F30
Akt
M6x10 d4A
36
kt
A
d4B
d3
50
22,5° 22,5°
Akt
h1
M6x12
h
Spigot optional
d3B
d3A 45°
Integral Ød2 f8
d3
200
22,5° 22,5° Spigot F30
Double Square 45°
TYPE Output Torque for Double Acting and Spring Return in Nm Spring
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke weight
Pressure
0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0° (Kg)
DR 4169 5003 5837 6671 7005 7505 8339 9173 10007 - 170
End Start
SC 2/3 2474 1695 3308 2529 4142 3362 4976 4196 5310 4530 5810 5030 6644 5864 2475 1695 199
SC 3 2135 1200 2969 2034 3803 2867 4637 3701 4971 4035 5471 4535 6305 5369 7139 6203 2970 2034 204
SC 3/4 2630 1539 3464 2373 4298 3206 4632 3540 5132 4040 5966 4874 6800 5708 7633 6542 3465 2373 210
SC 4 3125 1878 3959 2711 4292 3045 4793 3545 5627 4379 6461 5213 7294 6047 8962 7715 3960 2712 216
SC 4/5 3620 2217 3953 2550 4454 3050 5288 3884 6122 4718 6955 5552 8623 7220 10291 8887 4455 3051 221
SC 5 4115 2555 4949 3389 5783 4223 6616 5057 8284 6725 9952 8393 4949 3390 227
SC 5/6 4610 2894 5444 3728 6277 4562 7945 6230 9613 7898 5444 3729 233
SC 6 5105 3233 5938 4067 7606 5735 9274 7403 5939 4068 238
Max. Rotation Screw stroke Chamber Air volume (L) Moving time (sec.) (A) Operating temperature (B)
Pressure adjustment Ø (mm) opening closing opening closing STD (Standard) HT (High temp.) LT (Low temp.)
Notes: (A) The above indicated moving time of the actuator, are obtained in the following test conditions: (1) Room Temperature, (2) Actuator Stroke 90°,
(3) Solenoid Valve with orifice of 11 mm and a flow capacity Qn 6000 L/min., (4) Inside pipe diameter 11 mm, (5) Medium clean air, (6) Air supply pressure
5,5 bar (79,75 Psi), (7) Actuator without external resistance load.
Cautions: obviously on the field applications when one or more of the above parameter are different, the moving time will be different.
(B) For HT (high temperature) and LT (low temperature) services, a special Lubricant is requested. Please contact Air Torque factory.
Operating Medium:
The operating medium must be free of dust and oil. The maximum particle size must not exceed 30mm (ISO 8573 Part1, Class5). In order to prevent water
condensation and/or solidification (ice, when actuator work below 0°C), the operating medium must have a dew point equal to –20°C or, at least 10°C
below the ambient temperature (ISO 8573 Part1, Class3).
10 18 19 39 21
08 39A
17 40 15 50 13 30 06
11
24
04 14 16 09
03 32 07 20 60 41 42 43 05
30/31 17 01 06 19 13 30 18 39 03 02
21 10
04
14 50 08 11
40
42
15 16
07 20 60 41 43 12 05 09
30/31 17 01 06 19 13 30 18 39 03 02
21 10
04
14 50 08 11
40
42
15 16
07 20 60 41 43 12 05 09
30/31 17 01 06 19 13 30 18 39 03 02
21 10
04
14 50 08 11
40
42
15 16
07 20 60 41 43 12 05 09
30/31 17 01 06 19 13 30 18 39 03 02
21 10
04
14 50 08 11
40
42
15 16
07 20 60 41 43 12 05 09
30 17 01 06 19 02 13 18 39 03
21 10 04
14 15 40 50 41 08 11
42
16 20 09
07 60 43 12 05
30 17 08 19 11 18 39
01 04 10 39A 42
40 50 03 21 41
02 06
15 14 20 13
16 07 60 13A 05 12 43 09
20* 1 O' Ring (Pinion Bottom) NBR NBR 70 SH. A FPM - Silicon
21* 1 O' Ring (Pinion Top) NBR NBR 70 SH. A FPM - Silicon
anodized +
30 2 Right and left End Cap EN AC-46400 UNI EN 1706 Polyester coated
Stainless Steel
C ØZ 4 C
4
P
B
B
X
X
OI
H
M L
A L M
Model DR/SC0015 S und DR/SC0030 S Detail " Y "
N
M5xE
0
Nur Model DR/SC0015 S Detail " X " T-Anschluß
F
45°
Abtrieb - ISO5211 S
VDI/VDE 3845
VK
h
45°
Q1
R
W D
Q W1
Dimensions in mm
weight
T - ISO ISO
Type A B C D E F G H I min. L M N O P Q Q1 R S W W1 VK h min. X Z (kg)
228 Flange DR SC
DR/SC00015 S 141 69 75 M5x8 4 80 30 30 12 42 33 11 34.5 20 42 - 32 24 M5 - 1/8" F04 11 0.5 34.5 40 2.68 2,8
DR/SC00030 S 159 85 83 M5x8 8 80 30 35 16 46 37 11 42.5 20 50 - 32 24 M6 - 1/8" F05 14 0.5 42.5 40 3,8 3.99
DR/SC00060 S 211 102 96 M5x8 8 80 30 35 16 52.5 43.5 19 51 20 50 - 32 24 M6 - 1/8" F05 14 1.5 51 40 6.15 6.58
DR/SC00100 S 248 115 111 M5x8 8 80 30 55 19 60 51 19 57.5 20 70 - 32 24 M8 - 1/8" F07 17 1.5 57.5 40 9.05 9,7
DR/SC00150 S 268 127 125 M5x8 8 80 30 55 19 67.5 57.5 19 63.5 20 70 - 32 24 M8 - 1/8" F07 17 1.5 63.5 40 11.9 13
4 6,2 3,8 7,9 5,5 8,6 6,2 9,6 7,2 11,2 8,8 12,9 10,5 14,6 12,1 17,9 15,5 7,8 5,4
5 8,2 5,2 9,9 6,9 11,5 8,5 13,2 10,2 16,5 13,5 19,8 16,8 9,7 6,7
6 10,2 6,6 11,9 8,2 15,2 11,6 18,5 14,9 11,7 8,1
3 8,0 4,6 10,9 7,5 13,9 10,4 16,8 13,3 18,0 14,5 19,7 16,3 22,7 19,2 25,6 22,1 10,1 6,7
SC00030 S
4 11,6 7,0 14,6 10,0 15,7 11,1 17,5 12,9 20,4 15,8 23,4 18,7 26,3 21,7 32,2 27,5 13,5 8,9
5 15,3 9,5 18,2 12,4 21,1 15,4 24,1 18,3 29,9 24,2 35,8 30,0 16,9 11,1
6 18,9 12,0 21,9 14,9 27,7 20,8 33,6 26,7 20,2 13,3
3 15,8 8,3 21,6 14,1 27,5 19,9 33,3 25,8 35,6 28,1 39,1 31,6 44,9 37,4 50,7 43,2 20,8 13,3
SC00060 S
4 23,0 13,0 28,8 18,8 31,2 21,2 34,7 24,7 40,5 30,5 46,3 36,3 52,1 42,1 63,7 53,7 27,7 17,7
5 30,2 17,7 36,1 23,6 41,9 29,4 47,7 35,2 59,3 46,8 71,0 58,5 34,6 22,1
6 37,5 22,4 43,3 28,3 54,9 39,9 66,5 51,5 41,5 26,5
3 23,8 11,1 32,9 20,3 42,1 29,4 51,2 38,6 54,9 42,2 60,4 47,7 69,5 56,9 78,7 66,0 34,7 22,0
SC00100 S
4 34,7 17,9 43,9 27,0 47,5 30,7 53,0 36,2 62,2 45,3 71,3 54,5 80,5 63,6 98,8 81,9 46,2 29,3
5 45,7 24,6 54,8 33,8 63,0 42,9 73,1 52,1 91,5 70,4 110 88,7 57,8 36,7
6 56,7 31,4 65,8 40,5 84,1 58,8 102 77,1 69,3 44,0
3 36,1 19,2 49,4 32,5 62,7 45,8 76,0 59,1 81,3 64,4 89,3 72,4 103 85,7 116 99,0 47,3 30,4
SC00150 S
4 52,5 30,0 65,8 43,3 71,1 48,7 79,1 56,6 92,4 69,9 106 83,2 119 96,5 146 123 63,0 40,5
5 69,0 40,9 82,3 54,2 95,6 67,5 109 80,8 135 107 162 134 78,8 50,7
6 85,4 51,7 98,7 65,0 125 92 152 118 94,5 60,8
Dimensions
14 21 50
Included in Spare Part Kit
06
Pos. Pcs Description
05* 2 Bearing (Piston back)
06* 1 Bearing (Pinion top)
SW1
07* 1 Bearing (Pinion bottom)
08* 2 Thrust bearing (Pinion)
09* 2 Plug
11* 2 O-Ring (Stop screw)
14* 2 O-Ring (End cap)
15* 2 Bearing (Piston head)
16* 2 O-Ring (Piston)
20* 1 O-Ring (Pinion bottom)
21* 1 O-Ring (Pinion top)
15 16 07 20
Dimension of tools for Maintenance
DR/SC SW1 SW2 SW3 Nm
18 04 0015 10 10 8 5 -> 6
08 11 0030 10 10 10 10 -> 11
0060 13 13 10 10 -> 11
03, SW2
0100 13 13 10 10 -> 11
0150 17 17 13 23 -> 25
0220 19 19 13 23 -> 25
05
0300 19 19 17 48 -> 52
0450 22 22 17 48 -> 52
0600 22 22 19 82 -> 86
0900 24 24 19 82 -> 86
09
1200 30 30 22 132 -> 138
2000 30 30 24 200 -> 210
SW3
3000 36 36 22 132 -> 138
5000 46 46 24 200 -> 210
Typemarking
Flange and square for protection 'C', 'P', 'E' and 'D' extra bold printed *) Doubleflange not possible F/K <-> springs per piston
Only actuators type 'A' and 'B' in some sizes have a double-flange (italics).. bar <-> pressure (from 2,5 bar to 10 bar)
**) german number in [bar] corresponds to international number of the springs per piston, e.g. at 2,5 bar pressure 5 springs are used for
the actuator (left piston 3, right piston 2), at 3 bar pressure 6 springs a.s.o. to max. 12 springs per actuator ***) Delivery date on request
22.5
45
re
4
°
ØZ M6x10
ua
H
Sq
45°
Q1
20 20
B
Port '2' Port '4' Type DR/SC03000/05000
20
W M6x10
W1 "X"
P
L
VDI/VDE 3845
"X" T Connection I
D 22.5
A M N
20
R
) C C
O are 230
u
S (Sq
B
Type DR/SC03000 Type DR/SC05000
h1
G
h
205
Ød M6x12
F M N M N
00015 00030 00060 00100 00150 00220 00300 00450 00600 00900 01200 02000 03000 05000
Type DR DR DR DR DR DR DR DR DR DR DR DR DR DR
ISO Flange F04 F05 F05 F07 F07 - F10 - F12 - F14 - - -
Square 11 14 14 17 17 - 22 - 27 - 36 - - -
T-ISO228 1/8" 1/8" 1/8" 1/8" 1/4" - 1/4" - 1/4" - 1/4" - - -
A (120°) 159.5 179.5 240 281 306 - 395 - 500 - 618 - - -
A (180°) 197 221.5 298.5 348 381.5 - 496 - 626 - 769 - - -
B 69 85 102 115 127 - 157 - 196 - 245 - - -
C 59 72 84.5 97.5 111 - 136 - 169 - 213 - - -
D M5x8 M5x8 M5x8 M5x8 M5x8 - M5x8 - M5x8 - M5x8 - - -
E 4 8 8 8 8 - 8 - 8 - 8 - - -
F 80 80 80 80 80 - 80 - 80 - 80 - - -
G 30 30 30 30 30 - 30 - 30 - 30 - - -
H 20 20 20 20 20 - 30 - 30 - 50 - - -
I 30 35 35 55 55 - 70 - 85 - 100 - - -
Lmin 12 16 16 19 19 - 24 - 29 - 38 - - -
M 29 36 42.5 49.5 56 - 69.5 - 88 - 110 - - -
N 41.5 47 52 56.8 67 - 82 - 99 - 112 - - -
O 11 11 19 19 19 - 27 - 27 - 42 - - -
P 26.5 30 30.5 32.5 37.5 - 45 - 52 - 62 - - -
Q 42 50 50 70 70 - 102 - 125 - 140 - - -
Q1 - - - - - - - - - - - - - -
R 32 32 32 32 32 - 32 - 32 - 32 - - -
S 24 24 24 24 24 - 24 - 24 - 24 - - -
W M5 M6 M6 M8 M8 - M10 - M12 - M16 - - -
W1 - - - - - - - - - - - - - -
h1 min. 0.5 0.5 1.5 1.5 1.5 - 1.5 - 1.5 - 2 - - -
øZ 40 40 40 40 40 - 56/65 - 65 - 80/115 - - -
all dimensions in mm
Bottom - EN 12116 4 C
re
45
4
°
ØZ
ua
H
Sq
45°
B
Connection '2' Connection '4'
W "X"
L
VDI/VDE 3845
"X" I
D T Connection
A (135°) M N
R
O ar e)
qu
(S
S
G
h
Ød M6x12
h1 max.
ø d f8 55 70 70 85 100
h min.
3 3 3 3 4
1.5 1.5 1.5 1.5 2
øZ 40 56/65 56/65 65 115
all dimensions in mm
Description
Air Torque 3 position pneumatic actuators provide an operation of 0° - 45° - 90°. The intermediate position is
achieved by an external mechanical stop of movement on the 2 auxiliary pistons (for spring return actua-
tors it may be only one auxiliary piston). This intermediate stop position is adjustable from 0° - 90°, for exam-
ple 5°, 20°, 30°, 50°, 75° etc. The intermediate position is easily achieved by adjusting the external nuts loca-
ted outside the two end-caps.
Both type, double acting and spring return, are available.
Field of application: For dosing, for exact filling and for any kind of services where on 90° rotation an inter-
mediate stop position is desired.
In order to control the operation of Air Torque 3-position pneumatic actuators a system of solenoid valves
controlling a sequence of air supplies to the actuator is required as described below:
D C 2 4 C D
When ordering 3-Position pneumatic actuators, add ‘3P’ (Ex: 3P DR00150 F0710 17 A) to the normal actua-
tor code and specify the desired stop position including the intermediate e.g. 0° - 45° - 90°.
Technical Data
ØZ
4 C VDI/VDE 3845
4
S
H
D
Port D Port '2' Port D
R
Port '4'
X
Port C Port C
P
Detail "X"
L
T - Connection
Detail " X " I
Detail " Y "
h
A M N
M5xE
re
G
ua
Sq
45°
M6x12 Q1
W
F Q W1
Type 3P weight
DR/SC
A B C D E F G H I L M N O P Q R S W T ISO VK h X Z
D/S (kg)
00015
00030 369 85 72 M5x8 8 80 30 20 35 16 36 47 11 30 50 32 24 M6 1/8" F05 14 0.5 42.5 40 2,88 / 2,35
00060 480 102 84.5 M5x8 8 80 30 20 35 16 42.5 52 19 30.5 50 32 24 M6 1/8" F05 14 1.5 51 40 5,1 / 4,31
00150 617 127 111 M5x8 8 80 30 20 55 19 56 67 19 37.5 70 32 24 M8 1/4" F07 17 1.5 63.5 40 10,4 / 9,0
00300 800 157 136 M5x8 8 80 30 30 70 24 69.5 82 27 45 102 32 24 M10 1/4" F10 22 1.5 78.5 56/65 20,2 / 17,6
00600 991 196 169 M5x8 8 80 30 30 85 29 88 99 27 52 125 32 24 M12 1/4" F12 27 1.5 98 65 40,4 / 34,3
01200
90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 0° 90° 90° 0°
per
side Start End Start End Start End Start End Start End Start End Start End Start End Start End Start End Start End Start End
3 8 4.5 11 7.5 14 10 17 13 18 15 20 16 23 19 26 22 10,1 6,7
SC00030
4 12 7 15 10 16 11 18 13 20 16 23 19 26 22 32 28 13,5 8,9
5 15 9,5 18 12 21 15 24 18 30 24 36 30 16,9 11,1
6 19 12 22 15 28 21 34 27 20,2 13,3
3 16 8.3 22 14 28 20 33 26 36 28 39 32 45 37 51 43 20,8 13,3
SC00060
4 23 13 29 19 31 21 35 25 41 31 46 36 52 42 64 54 27,7 17,7
5 30 18 36 24 42 29 48 35 59 47 71 36 34,6 22,1
6 38 22 43 28 55 40 67 52 41,5 26,5
3 36 19 49 33 63 46 76 59 81 64 89 72 103 86 116 99 47,3 30,4
SC00150
4 110 62 138 90 149 101 165 117 193 145 221 173 248 201 304 256 132 84
5 144 85 172 112 200 140 227 168 283 223 338 278 165 105
6 179 107 206 135 262 190 317 245 198 126
3 149 84 206 141 262 198 319 255 342 277 376 311 433 368 489 425 199 135
SC00600
4 218 131 274 188 297 211 331 245 388 302 444 358 501 415 615 528 266 180
5 286 178 343 235 400 292 456 349 570 462 683 575 332 224
6 355 225 411 282 525 396 638 509 399 269
Description
Air Torque 3 position pneumatic actuators provide an operation of 0° - 90° - 180°. The intermediate position
is achieved by an external mechanical stop of movement on the 2 auxiliary pistons.
This intermediate stop position is adjustable from 90° - 180°, for example 95°, 120°, 130°, 150°, 175° etc. The
intermediate position is easily achieved by adjusting the external nuts located outside the two end-caps.
Field of application: For dosing, for exact filling and for any kind of services where on 180° rotation an inter-
mediate stop position is desired.
In order to control the operation of Air Torque 3-position pneumatic actuators a system of solenoid valves
controlling a sequence of air supplies to the actuator is required as described below:
D C 2 4 C D
When ordering 3-Position pneumatic actuators, add ‘3P’ (Ex: 3P DR150 F0710 17 A) to the normal actua-
tor code and specify the desired stop position including the intermediate e.g. 0° - 90° - 180°.
Technical Data
ØZ C
4
4
VDI/VDE 3845
H
D
Port D Port '2' Port D
R
Port '4'
X
Port C Port C
P
L
Detail "X"
T - Connection
h
Detail " X " I
Detail " Y "
A M N
re
ua
O
Sq
45°
M5xE
G
Q1
M6x12 W
Q W1
F
Square diagonal Square parallel
Dimensions in mm
Type weight
A B C D E F G H I L M N O P Q R S W T ISO VK h X Z
3P DR (kg)
00018
00038 431 85 72 M5x8 8 80 30 20 35 16 36 47 11 30 50 32 24 M6 1/8" F05 14 0.5 42.5 40 3,8
00068 568 102 84.5 M5x8 8 80 30 20 35 16 42.5 52 19 30.5 50 32 24 M6 1/8" F05 14 1.5 51 40 6,7
00158 730 127 111 M5x8 8 80 30 20 55 19 56 67 19 37.5 70 32 24 M8 1/4" F07 17 1.5 63.5 40 13,1
00308 951 157 136 M5x8 8 80 30 30 70 24 69.5 82 27 45 102 32 24 M10 1/4" F10 22 1.5 78.5 56/65 25,4
00608 1179 196 169 M5x8 8 80 30 30 85 29 88 99 27 52 125 32 24 M12 1/4" F12 27 1.5 98 65 50,1
01208 1370 245 213 M5x8 8 130 30 50 100 38 110 112 36 62 140 32 24 M16 1/4" F14 36 2 122 80/115 70
Torque ratings
Double Acting Torque Ratings in Nm
pressure:
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar
type*
3P DR00018
3P DR00038 14,7 17,6 20,5 23,5 24,6 26,4 29,3 32,2 35,2 41,0 46,9
3P DR00068 29,1 34,9 40,7 46,5 48,9 52,4 58,2 63,0 69,8 81,4 93,1
3P DR00158 66,5 79,8 93,1 106 111 119 132 146 159 186 212
3P DR00308 138 166 193 221 232 249 276 304 332 387 443
3P DR00608 283 340 397 453 476 510 567 623 680 794 907
3P DR01208 532 638 745 851 893 957 1064 1170 1276 1489 1702
*note: other types on request
Air Torque 4th Generation actuators with hydraulic speed control provide a very slow adjustable operating
movement. Actuators with hydraulic speed control are used in order to increase the actuator operating times
and where sudden changes in load need to be restrained.
Field of applications: preventing the slam shut effect when closing a butterfly valve and all application where
a fast shut operation on valve line may be dangerous for media and/or valves.
DR00450 to DR03000 2 4
Unit for speed control.
- two hydr. damper units
5/2 way valvel o.r.
SC00030 to SC00300
- one hydr. damper
unit
(two hydr. damper Damper unit
units on request)
SC00450 to SC03000
- two hydr. damper
units
Unit for speed control. 2 4 The moving times in both
directions are adjustable
3/2 way valvel o.r. independent of each
other.
Maximum pressure:
- double acting actuators = 5,5bar
- single acting actuators = 8bar
Other dimensions or materials see standard documen-
Anschluss '2' Anschluss '4' tation.
The torque is identical with the torque of the standard
version.
A
Control medium: Air - dry, lubricated or not corrosive
gas.
A1 Temperature range: -20°C to +80°C
Hydraulic medium: biodegradable fluid
Dimensions
HC DR/SC 00030 00060 00100 00150 00220 00300 00450 00600 01200 03000
A 220 290 341 371 438 480 - - - -
A1 282 370 435 435 562 616 725 760 980 1320
The 180° spring return actuators with 90° fail safety position are used for 0°-90°-180° operations where in case
of air failure the actuator has to return to the 90° position. At both ends of the actuator a spring set is moun-
ted and the compression on both sides of the springs is caused by the rotation from the 90° position.
The fail-safe operation is achieved by the extension of the compressed springs that bring the actuator from
0° or 180° position to 90° position.
The external travel stop is available as a standard in fully open position (180°) and in fully close position (0°),
and it is easily and precisely adjustable of ±4° in both directions.
2 4
Dimensions in mm
weight
Type FM T-ISO
A B C D E F G H I min L M N O P Q Q1 R S W W1 ISO CH h min X Z kg
228
FM SC00150 605 127 111 M5x8 8 80 30 55 19 56 67 17 37.5 20 70 - 32 24 M8 - 1/4" F07 17 1.5 63.5 40 14.4
FM SC00300 780 157 136 M5x8 8 80 30 70 24 69.5 82 27 45 30 102 - 32 24 M10 - 1/4" F10 22 1.5 78.5 56/65 27.5
FM SC00600 993 196 169 M5x8 8 80 30 85 29 88 99 27 52 30 125 - 32 24 M12 - 1/4" F12 27 1.5 98 65 50
FM SC01200 1220 245 213 M5x8 8 130 30 100 38 110 112 36 62 50 140 - 32 24 M16 - 1/4" F14 36 2 122 80/115 99
90° and 90° and 90° and 90° and 90° and 90° and 90° and 90° and 90° and 90° and 90° and and 90°
side 180° 180° 180° 180° 180° 180° 180° 180° 180° 180° 180° 180°
3 36 19 49 33 63 46 76 59 81 64 89 72 103 86 116 99 129 112 156 139 182 166 47,3 30,4
SC00150
4 55 7 82 34 110 62 138 90 149 101 165 117 193 145 221 173 248 201 304 256 359 311 132 84
5 89 29 117 57 128 68 144 85 172 112 200 140 227 168 283 223 338 278 165 105
6 123 52 151 79 179 107 206 135 262 190 317 245 198 126
3 149 84 206 141 262 198 319 255 342 277 376 311 433 368 489 425 546 481 660 595 773 708 199 135
SC00600
4 104 18 161 75 218 131 274 188 297 211 331 245 388 302 444 358 501 415 615 528 728 642 266 180
5 173 65 229 122 252 144 286 178 343 235 400 292 456 349 570 462 683 575 332 224
6 241 112 298 169 355 225 411 282 525 396 638 509 399 269
3 277 154 383 260 489 367 596 473 638 515 702 579 808 685 915 792 1021 898 1234 1111 1446 1323 378 255
SC01200
4 192 28 298 134 404 241 511 347 553 390 617 453 723 560 830 666 936 772 1149 985 1361 1197 504 340
5 319 114 426 221 468 263 532 327 638 434 745 540 851 646 1064 859 1277 1072 630 425
6 447 201 553 307 660 414 766 520 979 733 1192 946 756 510
Field of application:
Type SC00018 - SC00228 3 or 4 Valves, sampling or appli-
cations with 180° turning range
SC00018 - SC00158
Type SC00308 - SC01208
SC00308 - SC01208
H I min CH h min kg
Dimensions in mm (Type P has only one Flange -> bold printed) weight
Type SC T-ISO
A B C D E F G L M N O P Q Q1 R S W W1 ISO X Z V K
228
SC00018 263 69 59 M5x8 4 80 30 30 12 29 41.5 11 26.5 20 42 - 32 24 M5 - 1/8" F04 11 0.5 34 40 - - 2,0
SC00038 296 85 72 M5x8 8 80 30 35 16 36 47 11 30 20 50 - 32 24 M6 - 1/8" F05 14 0.5 42 40 - - 3,4
SC00068 393 102 84.5 M5x8 8 80 30 35 16 42.5 52 17 30.5 20 50 70 32 24 M6 M8 1/8" F05-07 14 1.5 51 40 - - 5,9
SC00108 456 115 97.5 M5x8 8 80 30 55 19 49.5 56.8 17 32.5 20 50 70 32 24 M8 M8 1/8" F05-07 17 1.5 57 40 - - 8,4
SC00158 502 127 111 M5x8 8 80 30 55 19 56 67 17 37.5 20 70 102 32 24 M8 M10 1/4" F07-10 17 1.5 63 40 - - 11,9
SC00228 587 145 127 M5x8 8 80 30 55 24 64 77 27 42.5 30 70 102 32 24 M8 M10 1/4" F07-10 22 1.5 72 56 - - 17,6
SC00308 630 157 136 M5x8 8 80 30 70 24 69.5 82 27 45 30 70 102 32 24 M8 M10 1/4" F07-10 22 1.5 78 56/65 125 179 22,2
SC00608 802 196 169 M5x8 8 80 30 85 29 88 99 27 52 30 102 125 32 24 M10 M12 1/4" F10-12 27 1.5 98 65 160 219 42,5
SC00908 913 221 191 M5x8 8 130 30 100 38 99 105 36 58 50 140 - 32 24 M16 - 1/4" F14 36 2 112 80/115 - - 62
SC01208 1020 245 213 M5x8 8 130 30 100 38 110 112 36 62 50 140 - 32 24 M16 - 1/4" F14 36 2 122 80/115 198 265 79
Spring return torque ratings in Nm spring
pressure
2,5 bar 3 bar 3,5 bar 4 bar 4,2 bar 4,5 bar 5 bar 5,5 bar 6 bar 7 bar 8 bar stroke
SC00108 SC00068 SC00038 SC00018 Type
spring
per side
0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 0° 180° 180° 90°
6 4,3 2,5 5,9 4,1 7,6 5,8 9,3 7,4 9,9 8,1 10,9 9,1 12,6 10,8 14,2 12,4 5,8 4
8 6,2 3,8 7,9 5,5 8,6 6,2 9,6 7,2 11,2 8,8 12,9 10,5 14,6 12,1 17,9 15,5 7,8 5,4
10 8,2 5,2 9,9 6,9 11,5 8,5 13,2 10,2 16,5 13,5 19,8 16,8 9,7 6,7
12 10,2 6,6 11,9 8,2 15,2 11,6 18,5 14,9 11,7 8,1
6 8 4,5 10,9 7,5 13,9 10,4 16,8 13,3 18 14,5 19,7 16,3 22,7 19,2 25,6 22,1 10,1 6,7
8 11,6 7 14,6 10 15,7 11,1 17,5 12,9 20,4 15,8 23,4 18,7 26,3 21,7 32,2 27,5 13,5 8,9
10 15,3 9,5 18,2 12,4 21,1 15,4 24,1 18,3 29,9 24,2 35,8 30 16,9 11,1
12 18,9 12 21,9 14,9 27,7 20,8 33,6 26,7 20,2 13,3
6 15,8 8,3 21,6 14,1 27,5 19,9 33,3 25,8 35,6 28,1 39,1 31,6 44,9 37,4 50,7 43,2 20,8 13,3
8 23 13 28,8 18,8 31,2 21,2 34,7 24,7 40,5 30,5 46,3 36,3 52,1 42,1 63,7 53,7 27,7 17,7
10 30,2 17,7 36,1 23,6 41,9 29,4 47,7 35,2 59,3 46,8 71 58,5 34,6 22,1
12 37,5 22,4 43,3 28,3 54,9 39,9 66,5 51,5 41,5 26,5
6 23,8 11,1 32,9 20,3 42,1 29,4 51,2 38,6 54,9 42,2 60,4 47,7 69,5 56,9 78,7 66 34,7 22
8 34,7 17,9 43,9 27 47,5 30,7 53 36,2 62,2 45,3 71,3 54,5 80,5 63,6 98,8 81,9 46,2 29,3
10 45,7 24,6 54,8 33,8 64 42,9 73,1 52,1 91,5 70,4 109,8 89 57,8 36,7
12 56,7 31 65,8 40,5 84,1 58,8 102,4 77,1 69,3 44
6 36,1 19,2 49,4 32,5 62,7 45,8 76 59,1 81,3 64,4 89,3 72,4 103 85,7 116 99 47,3 30,4
SC01208 SC00908 SC00608 SC00308 SC00228 SC00158
8 52,5 30 65,8 43,3 71,1 48,7 79,1 56,6 92,4 69,9 106 83,2 119 96,5 146 123 63 40,5
10 69 40,9 82,3 54,2 95,6 67,5 109 80,8 135 107 162 134 78,8 50,7
12 85,4 51,7 98,7 65,0 125 92 152 118 94,5 60,8
6 58,3 28,8 79,7 50,3 101 71,8 123 93,3 131 102 144 115 166 136 187 158 78,6 49,2
8 84,8 45,6 106 67,1 115 75,7 128 88,6 149 110 171 132 192 153 235 196 105 65,6
10 111 62,4 133 83,9 154 105 176 127 219 170 262 213 131 82
12 138 79,2 159 101 202 144 245 187 157 98,4
6 75,5 39,6 103 67,3 131 95 159 123 170 134 186 150 214 178 242 206 99 63
8 110 62 138 89,7 149 101 165 117 193 145 221 173 248 201 304 256 132 84
10 144 84,5 172 112 200 140 227 168 283 223 338 278 165 105
12 179 107 206 135 262 190 317 245 198 126
6 149 84 206 141 262 198 319 255 342 277 376 311 433 368 489 425 199 135
8 218 131 274 188 297 211 331 245 388 302 444 358 501 415 615 528 266 180
10 286 178 343 235 400 292 456 349 570 462 683 575 332 224
12 355 225 411 282 525 396 638 509 399 269
6 193 99 270 175 346 252 423 329 454 359 500 405 576 482 653 558 284 190
8 283 157 360 234 390 264 436 310 513 387 589 464 666 540 819 693 379 253
10 337 216 450 292 526 369 603 445 756 599 909 752 474 316
12 463 274 540 351 693 504 846 657 568 379
6 277 154 383 260 489 367 596 473 638 515 702 579 808 685 915 792 378 255
8 404 241 511 347 553 390 617 453 723 560 830 666 936 772 1149 985 504 340
10 532 327 638 434 745 540 851 646 1064 859 1277 1072 630 425
12 660 414 766 520 979 733 1192 946 756 510
Construction: 01 06 19 13 30 18 39 02
21 10
03
31 14 50F 42 08 11
40
15
09
17 16
07 20 60 41 43 12 05
PART PART
UNIT Q.TY PART DESCRIPTION UNIT Q.TY PART DESCRIPTION
N° N°
01 1 OCTI-CAM (Stop arrangement) 16* 2 "O" RING (Piston)
02 2 STOP CAP SCREW 17 min. 5 / max. 12 SPRING (Cartridge)
03 2 WASHER 18 1 SPRING CLIP (Pinion)
04 2 NUT ( CAP SCREW) 19 1 POSITION INDICATOR
05* 2 BEARING (Piston back) 20* 1 "O" RING (Pinion bottom)
06* 1 BEARING (Pinion top) 21* 1 "O" RING (Pinion top)
07* 1 BEARING (Pinion bottom) 30 1 RIGHT END CAPS
08* 2 THRUST BEARING (Pinion) 31 1 LEFT END CAPS
09* 2 PLUG 39 1 CAP SCREW (Indicator)
10 1 THRUST WASHER (Pinion) 40 2 PISTON
11* 4 "O" RING (Stop screw) 41 1 ACTUATOR IDENTIFICATION LABEL
12 2 PISTON GUIDE 42 2 END CAP LABEL
13 8 CAP SCREW (End cap) 43 1 SPIGOT (Only on request)
14* 2 "O" RING (End cap) 50F 1 SPECIAL BODY
15* 2 BEARING (Piston head) 60 1 DRIVE SHAFT
* suggested spare parts for maintenance
The minimun operating time indicated is obtained in the following test conditions:
(1) room temperature, (2) actuator stroke 90°, (3) minimum inside diameter for air supply circuit equal to air bore, (4) supply cir-
cuit without solenoid valve, (5) medium: clean air, (6) air supply pressure: 6 bar (80 Psi), (7) actuator without external resistance
load
Caution:
obviously on the field applications when one or more of the above parameters are different, the moving time will be different.
Note:
for other dimensions see catalogue or technical data sheet. For maintenance and installation see manual instruction. Fast acting
actuator cycle life may result lower than standard actuators in relation to field working conditions,
Dimensions:
Minimum operating time (sec.)
Actuator Air Conn. Air Conn. Air Bore (mm)
double acting single acting
Model size Port 2 size Port 4
Port 2 Port 4 open close open close
00015 SS G1/8"-ISO228 G1/8"-ISO228 ø4,5 ø4,5 0,04 0,06 0,07 0,08
4
04
4
03 15
04 Hex. Head Screw 09
17 16
4
or
11 07 20 60F Socket Screw 41 43 12 05
03 15
Hex. Head Screw 09
17 16 or
11 07 20 60F Socket Screw 41 43 12 05
04
03 15
Hex. Head Screw 09
17 16 or
11 L Approx. 07 20 60F Socket Screw 41 43 12 05
Dimensions:
L Approx.
Part N° Pcs. Description Part N° Pcs. Description
01(C) 1 OCTI-Cam (Stop arrangement) 16* 2 O-Ring (piston)
02F 2 Stop Cap screw 17 min.5 / max.12 Spring (cartridge)
03 6 Washer 18 1 Spring clip (pinion)
4
L Approx.
04(C) 2 Nut (screw ext. stroke adj.) 19 1 Position indicator
2 04F(C) 2 Nut (screw int. stroke adj.) 20* 1 O-Ring (Pinion bottom)
4
Extra Air Connections 05*(C) 2 Bearing (Piston back) 21* 1 O-Ring (Pinion top)
for external chambers
Port 2: 2
- NOT APPLICABLE FOR MODEL
06* 1 Bearing (Pinion top) 23 2 Screw (int. stroke adj.)
Air Connection DR/SC05000 AND DR/SC10000
internal chamber Extra Air Connections
07* 1 Bearing (Pinion bottom) 24 2 Screw (ext. stroke adj.)
- Air supply holes chambers
for external for DA
Port 2: - Exhaust
- NOTair holes for SR
08* 2 Thrust Bearing (Pinion) 32 (B) 1 Right end caps (treaded)
APPLICABLE FOR MODEL
Air Connection (filter only
4 on request)
DR/SC05000 AND DR/SC10000
09* 2 Plug 33 (B) 1 Left end caps (treaded)
internal chamber
- Air supply holes for DA
2
10 1 Thrust Washer (Pinion) 39 1 Cap screw (indicator)
- Exhaust air holes for SR
(filter
Extraonly on request)
11* 6 O-Ring (Stop screw) 40F 2 Piston
Air Connections
for external chambers
Actuator L max 12 2 Piston Guide 41 1 Actuator Identification label
Port 2:
Model
- NOT APPLICABLE FOR MODEL
approx.
Air Connection
13 8 (A) Cap screw 42 2 End cap label
DR/SC05000 AND DR/SC10000
internal chamber only for AT801
00220 SS 385
- Air supply holes for DA
14* 2 O-Ring (end cap) 43 1 Spigot (only on request)
and AT1000
00300 SS 414
- Exhaust air holes for SR
15* 2 Bearing (Pinion head) 50F 1 Body
(filter only on request)
00450 SS 498
and AT1000
00900 SS 584 (A) 12 pcs. for model DR/SC03000, 16 pcs. for model DR/SC05000 and DR/SC10000
01200 SS 625 (B) for models DR/SC00900 and bigger the 2 End Caps are symmetric
02000 SS 716 4 2 (C) for model DR/SC10000: 8 pcs. n°4, 4 pcs. n°5, not applicable part n°01 and 04°F
03000 SS 852
Port 2 with
onlyspecial
Stroke adjustment:
for AT801
05000 SS 1000
2
bigger bore
and AT1000
10000 SS 1100 - at 90° (open) stroke adj. through screw ext. stroke adj. part (part n° 24) on the END CAPS
- at 0° (closed) stroke adj. through screw int. stroke adj. part (part n° 23) on the PISTON
Port42Conditions:
with special
bigger bore
Technical Data and Test
2
Minimum Operating time (sec.)
The minimun operating time indicated is obtained Air Bore (mm)
Actuator Air Connect. Extra Air double acting single acting
in the following test conditions: Model size Port 2 Connection extra Air
Portsupply
2 with special
(1) room temperature, (2) actuator stroke 90°, (3) Port 2
Connect.
open close open close
bigger bore
minimum inside diameter for air circuit equal 00220 SS G1/4"-ISO228 G1/4"-ISO228 ø9 ø8 0,06 0,09 0,15 0,20
to air bore, (4) supply circuit without solenoid valve,
00300 SS G1/4"-ISO228 G1/4"-ISO228 ø9 ø8 0,07 0,10 0,20 0,25
(5) medium: clean air, (6) air supply pressure: 6 bar
00450 SS G1/4"-ISO228 G1/4"-ISO228 ø10 ø10 0,09 0,12 0,22 0,28
(80 Psi), (7) actuator without external resistance
load 00600 SS G1/4"-ISO228 G1/4"-ISO228 ø10 ø10 0,15 0,23 0,28 0,35
00900 SS G3/8"-ISO228 G3/8"-ISO228 ø12 ø12 0,20 0,30 0,32 0,40
01200 SS G3/8"-ISO228 G3/8"-ISO228 ø12 ø12 0,25 0,35 0,38 0,45
02000 SS G1/2"-ISO228 G1/2"-ISO228 ø13 ø13 0,30 0,40 0,46 0,55
Caution: 03000 SS G1/2"-ISO228 G1/2"-ISO228 ø15 ø15 0,35 0,45 0,52 0,60
obviously on the field applications when one or 05000 SS G3/4"-ISO228 - ø20 - 0,40 0,50 1,00 1,30
more of the above parameters are different, the
10000 SS G1"-ISO228 - ø27 - 1,50 1,40
moving time will be different.
Note:
for other dimensions see catalogue or technical data sheet. For maintenance and installation see manual instruction. Fast acting actuator
cycle life may result lower than standard actuators in relation to field working conditions,
30/31 17 06 21 19 13 30 08 18 39 03
14 01 50 04
10
40 11
42
02
15 16 07 20 60 41 43 12 05 09
Pos. Qty. Description Material Specification Protection **
OCTI-Cam for type DR/SC 15 + DR/SC 150 1.4301 UNI EN 10088-3 ----------
01 1
OCTI-Cam for type DR/SC 220 + DR/SC 5000 GS 400-15 UNI EN 1563 NOC
02 2 Stop cap screw A2 70 ISO 3506-1 ----------
03 2 Nut A2 70 ISO 3506-2 ----------
04 2 Washer 1.4301 UNI EN 10088-2 ----------
05* 2 Bearing (Piston back) PA46 Stanyl TW 300 ----------
Bearing (Pinion top) for type DR/SC15+DR/SC30 PA46 Stanyl TW 300 ----------
06* 1
Bearing (Pinion top) for type DR/SC60+DR/SC5000 PPS+GF ------------- ----------
Bearing (Pinion bottom) for type DR/SC15+DR/SC30 PA46 Stanyl TW 300 ----------
07* 1
Bearing (Pinion bottom) for Type DR/SC60+DR/SC5000 PPS+GF ------------- ----------
08* 2 Thrust bearing (Pinion) PA46 Stanyl TW 300 ----------
09* 2 Plug Silikon NBR 70 SH. A ----------
10 1 Thrust washer (Pinion) 1.4301 UNI EN 10088-2 ----------
11* 2 O-Ring (Stop screw) Special Silicon NBR 70 SH. A ----------
12 2 Piston guide PA66+GF ------------- ----------
8 Cap screw for type DR/SC 15 + DR/SC 2000 A2 70 ISO 3506-1 ----------
13 12 Cap screw for type DR/SC 3000 A2 71 ISO 3506-1 ----------
16 Cap screw for type DR/SC 5000 A2 72 ISO 3506-2 ----------
14* 2 O-Ring (End cap) Special Silicon NBR 70 SH. A ----------
15* 2 Bearing (Piston head) POM ------------- ----------
min. 5
16* 2 O-Ring (Piston) Spezial Silikon NBR 70 SH. A ----------
max. 12
17 Spring (Cartridge) SiCr sping alloy steel UNI EN 10270-2 Standard
Technical Data: Operating temperature -55°C to +80°C, only for short period of time up to -60°C!
Working pressure: max. 8bar The operating time depends on each application and working conditions.
Operating media: dry or lubricated air or inert/non-corrosive gases provided they are compatible with the internal
actuator parts and lubricant.
The operating media must have a dew point equal at least 10°C below the ambient temperature.
The maximum particel size must not exceed 30µm.
Limit-Switch-Kit
Multifunction indicator C
for actuators with the size 4
B
Multifunction indicator
A
for actuators with the size 1
Advantages
Direct mounting of double sensor without additional puzzling with cams
perfect visible position of the actuator
Connection acc. to DIN/ISO 5211, VDI/VDE 3845 and NAMUR
Multifunction indicator
Metal pin
11
Plastic insert SW
Metal insert for
P.N.10519 Plastic indicator
sensor contact
SW11 -> P.N.05518
Typ AT1 P.N.10419 SW17 -> P.N.20519
Plastic insert
P.N.10519
Plastic
insert
17
P.N.10519
SW
Plastic insert
P.N.10519
Metal pin
for sensor Cam insert for
contact mechanical switch
P.N.d5x10
P.N.10619
Multifunction indicator
Standard
C -> MFAD56SW27 only visual indication
MFAD56SW27
D -> MFAD65SW27
Plastic
Special S.S. screw indicator Special S.S. screw
for sensor contact Plastic P.N.45519
for sensor contact
P.N.40319 insert P.N.40319
P.N.50519
Plastic insert
Plastic P.N.50519
insert
P.N.50519
Plastic insert
P.N.50519
SW 27
Special
S.S. screw
for sensor
contact Cam insert for
P.N.40319 mechanical switch
Cam insert for Special S.S. screw P.N.50619
mechanical switch for sensor contact
P.N.50619 P.N.40319
Multifunction indicator
Standard
E -> MFAD80SW36 only visual indication MFAD80SW36
F -> MFAD115SW36
Plastic
indicator Plastic insert
Plastic insert P.N.65519 P.N.60519
P.N.60519
Plastic insert
T.Nr.60519
Plastic insert
SW 36
P.N.60519
SW
19
Adaptor with VDI/VDE slot for switch box and posi-
tioner connection, high temperature service etc.
For emergency override use only adaptor type
SCHS.
Adaptor for actuator size
DR/SC00060-00150 Part number Description
Adaptor
Type SCHE30 SCHE30 Sintered stainless steel cover
adaptor for actuator sizes
DR/SC00060-00150
SW
SW 44
Adaptor with VDI/VDE slot for switch box and posi-
tioner connection, high temperature service etc.
Adaptor for actuator size
DR/SC00900-5000
Part number Description
Adaptor
Type SCHE56 SCHE56 Sintered stainless steel cover
adaptor for actuator sizes
DR/SC00900-05000
Reduction Typ A B C D E
ADH 11/09 11 9 11 12.3 14
ADH 14/10 14 10 16 a.A. a.A.
ADH 14/11 14 11 16 14.3 18
ADH 14/12 14 12 16 a.A. a.A.
ADH 17/10 17 10 17 a.A. a.A.
ADH 17/11 17 11 17 14.3 22
ADH 17/12 17 12 17 a.A. a.A.
ADH 17/14 17 14 17 18.3 22
ADH 22/16 22 16 22 a.A. a.A.
ADH 22/17 22 17 22 22.5 28
ADH 27/22 27 22 27 28.5 36
ADH 36/27 36 27 36 36 44.9
Safety lockout
These instructions contain the requested informations needed to fit on standard actuator the safety
lockout kit. The safety lockout kit supplied contains all requested parts.
special longer
special longer Standard
Standard special
special
screw (226)
screw (226) stop cap
stop cap screw
screw (02)
(02) longer screw
longer screw (226)
(226)
special longer Standard special
screw (226)
special
special longer
longer stop cap screw (02)
Standard
Standard longer
specialscrew (226)
special
screw
screw (226)
(226) stop
stop cap
cap screw
screw (02)
(02) longer
longer screw
screw (226)
(226)
Safety lockout
Safety lockout in fully open or fully closed position on 4th Generation actuator DR and SC
Label:
Pad lock
!
WARNING!
(230) Compressed air
Label:
do not remove.
Pad lock
!
WARNING!
ACHTUNG!
(230) Compressed
Nicht air
herausdrehen
do notsteht
Antrieb remove.
unter Druck.
ACHTUNG!
ATTENTION!
Nicht
Ne pas herausdrehen
démonter,
Antrieb steht
présence d'air unter Druck.
comprimé.
ATTENTION!
Ne pas démonter,
présence d'air comprimé.
"O"Ring (11)
Washer (03)
Safety
"O"Ring (11)
cover (229)
Washer (03)
Safety
Standard
cover (229)
stop cap screw (02)**
Washer (03)
Standard
Safety cover (229)
stop cap
Special screw
screw (02)**
(228)
Washer (03)
Safety cover
Special screw(229)
(226)
Special screw (228)
Parts and quantities
DR/SC 00015 00030 00060 00100 00150 00220 00300 00450 00600 00900 01200 02000 03000
Kit VK00015 VK00030 VK00060 VK00100 VK00150 VK00220 VK00300 VK00450 VK00600 VK00900 VK01200 VK02000 VK03000
A 17.5 20 25 25 30 30 30 35 35 40 40 40 50
B 50 91 80 80 90 106 106 133 133 135 156 156 185
C 25 30 30 30 30 30 30 30 30 30 30 30 30
D 44.5 80.5 80.5 80.5 80.5 80.5 80.5 80.5 80.5 90.5 90.5 90.5 90.5
C E
E 13.5 13.5 18 18 21 25.5 25.5 29.5 29.5 33 38 38 44
A
C E
A
D
B
D
Nut (04)
Travel stop
screw
(221 - 50%)
(222 - 100%)
Washer (03)
L max.
30
4
4
M5x8 ØZ
View : X
H
80
A
B
15
T
14
32
H1
13
P
24 12
11
10
9
H2
8
7
3
DN
G
Type1) DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC
Size 00015 00015 00015 00015 00015 00030 00015 00030 00030 00060 00030 00060 00060 00100 00060 00100 00060 00150 00100 00150 00150 00220
G 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
DN 10 12 16 20 25 32 40 50 65 80 100
L 60 60 75 80 90 110 120 140 185 205 240
SW 24 24 29 35 41 50 58 73 90 105 135
B1 50 50 50 54 60 72 81 99 125 190 222
H2 40 40 40 44 52 58 68 77 98 110 138
A 141 141 141 141 141 159 141 159 159 211 159 211 211 248 211 248 211 269 248 269 269 315
B 69 69 69 69 69 85 69 85 85 102 85 102 102 115 102 115 102 127 115 127 127 145
H 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30
H1 129 129 129 129 129 145 133 149 157 174 163 180 190 203 199 212 220 245 245 257 285 313
P 27 27 27 27 27 30 27 30 30 31 30 31 31 33 31 33 31 38 33 38 38 43
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" 1/8" 1/4" 1/4" 1/4"
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 56/65
O 71 71 71 71 71 83 71 83 83 95 83 95 95 107 95 107 95 123 107 123 123 141
M 29 29 29 29 29 36 29 36 36 43 36 43 43 50 43 50 43 56 50 56 56 64
N 42 42 42 42 42 47 42 47 47 52 47 52 52 57 52 57 52 67 57 67 67 77
1) Type DR -> double acting, Typ SC -> single acting
30
4
4
M5x8 ØZ
View: : X
Ansicht
H
80
A
15
B
14
T
13
32
H1
12
P
24
11
10
9
8
H2
7
Face-to-face dimen- 3
sions of the valve
4
DN
Typ1) DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC
Größe 00015 00015 00015 00015 00015 00030 00015 00030 00030 00060 00030 00060 00060 00100 00060 00100 00060 00150 00100 00150 00150 00220
1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
G 20 20 23 28 34 41 49 62 78 94 125
DN 10 12 16 20 25 32 40 50 65 80 100
L 70 70 75 90 100 110 125 150 190 220 270
B1 50 50 50 54 60 72 81 99 125 190 222
H2 40 40 40 44 52 58 68 77 98 110 138
A 141 141 141 141 141 159 141 159 159 211 159 211 211 248 211 248 211 269 248 269 269 315
B 69 69 69 69 69 85 69 85 85 102 85 102 102 115 102 115 102 127 115 127 127 145
H 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30
H1 129 129 129 129 129 145 133 149 157 174 163 180 190 203 199 212 220 245 245 257 285 313
P 27 27 27 27 27 30 27 30 30 31 30 31 31 33 31 33 31 38 33 38 38 43
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" 1/8" 1/4" 1/4" 1/4"
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 56/65
O 71 71 71 71 71 83 71 83 83 95 83 95 95 107 95 107 95 123 107 123 123 141
M 29 29 29 29 29 36 29 36 36 43 36 43 43 50 43 50 43 56 50 56 56 64
N 42 42 42 42 42 47 42 47 47 52 47 52 52 57 52 57 52 67 57 67 67 77
1) Type DR -> double acting, Typ SC -> single acting
30
4
M5x8 ØZ
Ansicht
View: : X
H
80
A
B
T
10
32
H1
9
P
24 8
11 7
12 6
5
H2
4
Ø D ±0.15
G
13
3
2
L ±1.0 1
Pos. pcs description material Pos. pcs description material All dimensions in mm.
1 1 Body 1.4408 8 2 Spring 1.4301 Face-to-face dimensions
2 1 End cap 1.4408 9 1 Nut 1.4301 of the valve acc. to DIN
3 2 Ball seat PTFE 10 1 Ring 1.4301 3202 M3,
4 1 Thrust washer PTFE 11 1 Stem 1.4401 BSP thread
5 1 Body seal PTFE 12 1 O-Ring Viton
6 2 Stem packing PTFE 13 1 Ball 1.4401
7 1 Gland nut 1.4401
Type1) DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC
The units are suitable for
Size 00015 00015 00015 00015 00015 00030 00015 00030 00030 00060 00030 00060 00030 00060 00060 00100
6 bar control pressure
G 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
and for lubricating, neu-
ØD 11,6 12,7 15 20 25 31,8 38 50,8
tral medias.
L 50 60 75 80 90 110 120 140
Units for not lubricating,
H2 50 50 53 64 71 82 93 115
crystallizing medias or
medias with particles on
A 141 141 141 141 141 159 141 159 159 211 159 211 159 211 211 248
request.
B 69 69 69 69 69 85 69 85 85 102 85 102 85 102 102 115
H 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20
H1 139 139 139 139 142 158 153 169 176 193 187 204 198 215 237 250
P 27 27 27 27 27 30 27 30 30 31 30 31 30 31 31 33
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
O 71 71 71 71 71 83 71 83 83 95 83 95 83 95 95 107
M 29 29 29 29 29 36 29 36 36 43 36 43 36 43 43 50
N 42 42 42 42 42 47 42 47 47 52 47 52 47 52 52 57
1) Type DR -> double acting, Typ SC -> single acting
30
4
M5x8 ØZ
View:: X
Ansicht
H
80
A
B
32
H1
24
14 11
12 10
H2
13 9
8
7
DN
5
The units are suitable for 6 6
ØG
Type(1) DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC
Size 00015 00030 00015 00030 00030 00060 00030 00060 00060 00100 00060 00150 00100 00220 00100 00220 00150 00300
1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
DN 15 20 25 32 40 50 65 76 96
L 40 44 53 58.4 62 78 100 120 152
ØG 65 75 85 100 110 125 145 160 180
M M12x1,75 M12x1,75 M12x1,75 M16x2 M16x2 M16x2 M16x2 M16x2 M16x2
B1 95 105 115 135 145 155 185 200 220
H2 60 64.3 64.6 69 76.3 85.7 105 123 132
A 141 159 141 159 159 211 159 211 211 248 211 269 248 315 248 315 269 345
B 69 85 69 85 85 102 85 102 102 115 102 127 115 145 115 145 127 157
H 20 20 20 20 20 20 20 20 20 20 20 20 20 30 20 30 20 30
H1 149 165 153 169 170 187 174 191 198 211 208 233 240 280 258 298 279 319
P 27 30 27 30 30 31 30 31 31 33 31 38 33 43 33 43 38 45
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" 1/8" 1/4" 1/8" 1/4" 1/4" 1/4"
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 56/65 40 56/65 40 56/65
O 71 83 71 83 83 95 83 95 95 107 95 123 107 141 107 141 123 152
M 29 36 29 36 36 43 36 43 43 50 43 56 50 64 50 64 56 70
N 42 47 42 47 47 52 47 52 52 57 52 67 57 77 57 77 67 82
1) Type DR -> double acting, Typ SC -> single acting
30
4
View: M5x8 ØZ
Ansicht : X
H
80
A
B
T
H1
32
P
24
8
H2
7
6
5
DN
G
4
3
2
1 SW
L B1
Pos. pcs description material Pos. pcs description material All dimensions
1 1 Body 2.0402 nickel plated 5 2 Ball seat PTFE in mm.
2 1 End Cap 2.0402 nickel plated 6 1 Stern seat PTFE Face-to-face
3 1 Ball 2.0402 nickel plated 7 2 O-Ring Viton dimensions of
4 1 Stern 2.0402 nickel plated 8 1 Coupling 2.0402 nickel plated the valve acc.
to DIN 3202 M3,
Type1) DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC
Thread acc. to
Size 00006 00015 00006 00015 00006 00015 00015 00015 00015 00030 00030 00060 00030 00100 00060 00100
G 1/4" 3/8" 1/2" 3/4" 1" 1 1/4" 1 1/2" 2"
DIN 2999, Part 1
DN 8 10 15 20 25 32 40 50
L 50 60 75 80 90 110 120 140
The units are
SW 19 22 27 32 41 50 55 70
suitable for 6
B1 25,5 25,5 34 44 53 66 79 95
bar control
pressure and
H2 33 34 35.5 45,5 49,5 63 69 85
for lubricating,
A 115 141 115 141 115 141 141 141 141 159 159 211 159 248 211 248 neutral medias.
B 45 69 45 69 45 69 69 69 69 85 85 102 85 115 102 115 Units for not
H 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 lubricating,
H1 98 122 99 123 100,5 124,5 134,5 134,5 138,5 105 168 185 174 204 207 220 crystallizing
P *) 27 *) 27 *) 27 27 27 27 30 30 31 30 33 31 33 medias or
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" medias with
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 particles on
O 45 71 45 71 45 71 71 71 71 83 83 95 83 107 95 107 request.
M 22,5 29 22,5 29 22,5 29 29 29 29 36 36 43 36 50 43 50
N 22,5 42 22,5 42 22,5 42 42 42 42 47 47 52 47 57 52 57
*) port for solenoid valve turned for 90°
30
View:: X
Ansicht ØZ
M5x8
H
80
A
B
11
T
H1
10
32
9
P
24 8
7
6
H2
5
12
ØD
4
G
13
3
2
L
1 PORT 1 2 3 4
TYP
Prinziple of the possible positions of the ball valve,
turning range actuator 90° (turning range 180° or
L 1
3
2 1
3
2 1
3
2 1
3
2
A 141 141 141 141 141 159 141 159 159 211 159 211 159 248 211 248 Units for not lubrica-
B 69 69 69 69 69 85 69 85 85 102 85 102 85 115 102 115 ting, crystallizing
H 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 medias or medias
H1 125 125 125 125 125 141 131 147 151,5 168,5 157 174 162,5 192,5 188 201 with particles on
P 27 27 27 27 27 30 27 30 30 31 30 31 30 33 31 33 request.
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8"
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40
O 71 71 71 71 71 83 71 83 83 95 83 95 83 107 95 107
M 29 29 29 29 29 36 29 36 36 43 36 43 36 50 43 50
N 42 42 42 42 42 47 42 47 47 52 47 52 47 57 52 57
1) Type DR -> double acting, Typ SC -> single acting
4
Maintenance-free, self- ØZ
H
adjustable stem bearing
spring backed
A
packing box
acc. to
TA-Luft
B
Anti blow out T
12
32
stem
H1
24 11
P
Antistatic design
10
9
dead space reduced
8
full bore
H2
6
optional: 14
DN
5
13
Material certificate acc. to
EN 10204/3.1B
2
L 1
Type1) DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC DR SC
size 00030 00030 00030 00030 00030 00060 00030 00060 00060 00100 00060 00100 00100 00150 00150 00220 00220 00300
G 1/2" 3/4" 1" 1 1/4" 1 1/2" 2" 2 1/2" 3" 4"
DN 15 20 25 32 40 50 65 80 100
L 115 120 125 130 140 150 170 180 190
H2 50 53,5 58,5 71 76 83,5 95 113 131
A 159 158 159 158 158 210 158 210 210 247 210 247 248 268 269 315 315 345
B 85 85 85 85 85 102 85 102 102 115 102 115 115 127 127 145 145 157
H 20 20 20 20 20 20 20 20 20 20 20 20 20 20 20 30 30 30
H1 155 155 158 158 163 180 176 193 198 211 205 218 230 242 260 288 306 318
P 30 30 30 30 30 31 30 31 31 33 31 33 33 38 38 43 43 45
T 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/8" 1/4" 1/4" 1/4" 1/4" 1/4"
ØZ 40 40 40 40 40 40 40 40 40 40 40 40 40 40 40 56/65 56/65 56/65
O 83 83 83 83 83 95 83 95 95 107 95 107 107 123 123 141 141 152
M 36 36 36 36 36 43 36 43 43 50 43 50 50 56 56 64 64 70
N 47 47 47 47 47 52 47 52 52 57 52 57 57 67 67 77 77 82
1) Type DR -> double acting, Typ SC -> single acting
The units are suitable for 6 bar control pressure and for lubricating, neutral medias.
Units for not lubricating, crystallizing medias or medias with particles on request.
Maintenance
CONTENENTS
1) GENERAL
2) SAFETY NOTICE
3) WORKING CONDITIONS AND TECHNICAL DATA
4) OPERATING FUNCTION AND DIRECTION OF ROTATION
5) ACTUATOR INSTALLATION INSTRUCTION
6) MAINTENANCE INSTRUCTION
7) STORAGE INSTRUCTION
1) GENERAL
This instruction manual contains important information regarding the installation, operation, main-
tenance and storage for AIR TORQUE rack and pinion pneumatic actuators. Please read these
instructions carefully and save them for future reference. It is important that only properly trained
personnel disassemble/assemble the actuator.
2) SAFETY NOTICE
• It is important that the actuator should only be used within pressure limits indicated in our techni-
cal specifications.
• Operating the actuator over pressure limits will damage internal parts as well as cause damage
to the housing.
• Operating the actuator over temperature limits will damage internal and external components
(disassembly of spring return actuator may become dangerous).
• Operating the actuator in corrosive environments with incorrect protection may damage the
internal and external parts.
• Do not disassemble individual spring cartridges. Disassembly may result in personal injury. For fur-
ther information contact Air Torque.
• Isolate all air lines and make sure that actuator air connection is vented before installation or ser-
vicing of the actuator.
• Do not remove end caps or disassemble the actuator while the actuator is pressurised.
• Before installing onto a valve make sure that the rotation of the valve and the actuator are the
same and that the position indicator orientation is also correct.
• If the actuator is incorporated in a system or used within safety devices or circuits, the customer
shall ensure that the national and local safety laws and regulations are observed.
Maintenance
• Operating Time:
See Technical Data Sheet.
Caution: The operating speeds depend on several factors such as: supply pressure/supply capac-
ity (i.e. pipe diameter/flow capacity or pneumatic accessory), valve type, valve torque and char-
acteristics, what safety factor is to be applied, frequency of operation and temperature.
• Stroke:
The stroke for AIR TORQUE actuators are as follows (See technical data):
Standard construction: 90° rotation with stroke adjustment at 0° and 90° + or – 4°
Type Y 120o stroke: 120° rotation with stroke adjustment at 0° and 120° + or – 4°
Type X 180o stroke: 180° rotation with stroke adjustment at 0° and 180° + or – 4°
• Lubrication:
The actuators are factory lubricated for the life of the actuator in normal working conditions.
The standard lubricant is suitable for use from -20oC (-4oF) to +80oC (+176o F). For low (LT) and high
(HT) temperature service, where special grease is required please contact AIR TORQUE.
Recommended Air Torque actuator lubricants for standard working conditions:
- Kluber Unigear LA02
- Esso (Exxon) Beacon EP2
- Fina Marson EP L2
- Shell Alvania EP2
- Mobilux EP2
• Construction:
Rack and pinion actuator design suitable for both indoor or outdoor installations.
The standard rotation is clockwise to close, counter-clockwise rotation is obtained when port 2 is
pressurised. For actuator marked LF the rotation is counter-clockwise to close, clockwise rotation
is obtained when port 2 is pressurised.
Maintenance
Air supplied to Port 2 forces the pistons apart and Air supplied to Port 4 forces the pistons together
toward end positions, with exhaust air exiting at Port with exhaust air exiting at port 2, a clockwise rota-
4, a counter clockwise rotation is obtained. tion is obtained.
Air supplied to Port 2 forces the pistons apart and On loss of air pressure (air or electric failure) at
toward end positions, compressing the springs with Port 2 allow the springs to force the pistons to the
exhaust air existing at Port 4, a counter clockwise centre position with exhaust air exiting at Port 2, a
rotation is obtained. clockwise rotation is obtained.
Maintenance
• Switchbox mounting:
Fit the switchbox and bracket 1 onto the actuator 3, using four screws provided (max. tightening
torque see the table below).
M.. Nm
M5 5 -> 6
M6 10 -> 11
M8 23 -> 25
M10 48 -> 52
M12 82 -> 86
M14 132 -> 138
M16 200 -> 210
M20 390 -> 410
M24 675 -> 705
Maintenance
Maintenance
6) MAINTENANCE INSTRUCTION
With the information given below, AIR TORQUE provides the end user with all the required infor-
mation necessary for maintenance. Under normal operating conditions the actuator requires only
periodic observation to ensure proper adjustment.
Rebuilding of the AIR TORQUE actuators is allowed only to the personnel of AIR TORQUE or to
personnel which are properly instructed. By contravention the guarantees expires!
Spare kits for maintenance are available to replace all seals and bearings (Soft components
listed in table) that may be necessary between 500,000 and 1,000,000 cycles depending on ope-
rating and/or environmental conditions.
Maintenance
6.2) Disassembly
When disassembly of actuator is required for maintenance, firstly remove
the actuator from the valve. Before performing any disassembly operations
it is important to verify that the actuator is not pressurised. Always use cauti-
on and double check that the ports 2 and 4 are vented and are free from
any accessory and/or device. When the actuator is a spring return unit,
make sure that the actuator is in the failed
position before disassembling.
C) End Caps disassembly (Part No 30 right and 31 left) For model DR/SR900
to DR/SC3000 the 2 end caps
(30) are symmetric, figure 03:
• Remove cap screw (End cap 13) in the sequence shown in the fig-
ure 03. Caution: when disassembling a spring return actuator, the end cap
(30 and 31) should be loose after unscrewing end cap bolts (13) 4-5 turns.
If there is still force on the end cap after 4-5 turns of the end cap bolts, this
may indicate a damaged spring cartridge and any further disassem-
bly should be discontinued. Further disassembly of the end caps may
result in injury. Return actuator to AIR TORQUE for further maintenance.
• For spring return actuators, always remove spring cartridge.
• Remove end cap O-rings (14) and discard if replacing all soft components.
Maintenance
6.3) Assembly :
Prior to assembly, ensure all components are perfectly clean and free
from damage. Please see point 3 for recommended lubricants.
B) Pistons assembly (Part No. 40), figures 08, 09, 10 and 11:
• Install piston O-rings (16), the Piston skirt (05) and piston head (15) bear-
ings.
• Grease the internal surface of the body (50) and the piston (40) rack
teeth.
• Hold the body (50) in a horizontal position by inserting the top of the
shaft into a vice or the bottom of the shaft connection into a male drive
fitted in a vice as shown in figure 08.
• Ensure that the octi-cam is in the right position as shown in figure 09.
• For standard rotation assembly (clockwise to close) rotate the body (50)
about 40-45° counter-clockwise from bottom view or clockwise from
top view depending on which way the shaft has been linked as shown
in figure 10.
• Press the two pistons (40) simultaneously inside the body (50) until the pis-
tons are engaged and rotate the body clockwise from bottom view or
counter clockwise from top view until the stroke is completed.
• Ensure that when the pistons are inserted that they both mesh at the
same time. Check fully closed and open positions as shown in figure 11.
Maintenance
• Fit end cap O-ring seal (14) into the groove in the end cap, on both end
caps.
• Fit end caps onto the body (50), verifying that the O-ring remains in the
groove.
• Insert all the cap screws (13) and tighten each only partially. Complete
tightening by following the sequence indicated in figure 14.
D) Assembly of stop cap screws (Parts 02), and stroke adjustment figure15:
• Insert on both the stop cap screw (02), the nut (04), the washer (03), and
the O-ring in (11)
• Fit the stop cap screw (02) in the body.
7) STORAGE INSTRUCTIONS
If the actuators are not for immediate use, the following precaution must
be taken for storage :
• Store in a dry environment at ambient temperature.
• It is recommended that the actuator be stored in its original box.
• Do not remove the plastic plugs on air supply ports.
Way of turning:
By pressure on port ‘2’ the drive shaft of the actuator turns ‘anti-clockwise' from basic position of
the actuator ‘close’ into the end position ‘open’, an opening of the valve is obtained.
In case of pressure fail on port ‘2’ the drive shaft of the actuator turns ‘clockwise’ into the basic
position of the actuator ‘close’ (only SC), a closing of the valve is obtained.
The delivery will be in basic position. By assembling actuator in basic position and valve in close
position.
The order no. is: DR or SC
Important: By mounting diagonal to the flow from the valve, pay attention for the correct position
of the indicator (Must be turned about 90°, see manual)!
If the drive shaft of the actuator has to turn during the opening of the
valve anticlockwise (fail safe to open by spring return), the pistons
and the cam (turning of the drive shaft) must be assembled as shown
in the figure (bottom).
Way of turning:
The drive shaft of the actuator turns 'anticlockwise' from end position of the actuator ‘open’ (pres-
sure fail on port ‘2’) into the basic position ‘close’, an opening of the valve is obtained.
The delivery will be in basic position. By assembling actuator in basic position and valve in open
position.
The order no. is: DL or SO
The standard versions of the AT-actuators have the square position ‘diagonal’.
ER 10/20/35/45/60/100
Description:
Electric actuator with 90° turning range
in plastic housing and manual override
by outgoing axle.
Standard equipment:
Synchronous motor 115V - 230V AC and continuous multi-voltages
12/24V AC/DC, 4 adjustable limit switches 5A,
removable fixation plate F03-F04-F05 or F05-F07,
manual override, torque limiter as well as
mechanical limit stops 90° +5°.
Options:
Long handle, 2 DIN43650 connectors, heating resistor, 0-10V or 4-20mA positioner, 180° turning range without
mechanical limit stops, 1-5-10kΩ or 4-20mA feedback potentiometer, fail safe security block NO/NC with
battery, 3-rd position 0°-90°-180° with feedback.
Technical Data:
Duty rating at maximum torque: Type 115V or 230V AC = 50% of the operating time,
Type 12/24V AC/DC = 30% of the operating time, working temperature: -10°C to +55°C
Electric connections: 2 x ISO 20, IP67
Protection: IP65, Weight: 1,5kg and 3kg.
* travel time for 24V; ** X = removable plates with F03, F04 or F05 connection
1 Position indicator
2 Terminal block
3 Motor
4 Cams for limit switch
adjustment
Additional adjustment possi- Prinziple of cam
ble with long-nose pliers or adjustment with
adjustment key (optiol) adjustment key (option)
5 Gear
ER Multivolt/ Posi P6
Description:
Electric actuator with 90° turning range and integrated
positioning 0-4-20mA or 0-10V, in plastic housing and manual
override by outgoing axle.
Standard equipment:
Synchronous motor 115V - 230V AC and continuous
24V AC/DC, 4 adjustable limit switches 5A, 0-4-20mA or
0-10V feedback, removable fixation plate F03-F04-F05 or F05-F07,
manual override, torque limiter as well as
mechanical limit stops 90° +5°.
Options:
Long handle, heating resistor 10W
Technical Data:
Duty rating at maximum torque = 50% of the operating time,
regulating = 50% of maximum torque,
positioning = 100% of maximum torque, working temperature: -10°C to +55°C
Electric connections: 2 x ISO 20, IP67, Protection: IP65, Weight: 1,5kg and 3kg.
MULTIVOLT
Type ISO Torque Voltage Travel time
ER10.X3A.S00** 14/F03-F04-F05 10 Nm 100-240 V AC 10 s
ER10.X33.S00** 14/F03-F04-F05 10 Nm 24 V AC/DC 10 s
ER20.93A.S00 14/F03-F04-F05 20 Nm 100-240 V AC 20 s
ER20.933.S00 14/F03-F04-F05 20 Nm 24 V AC/DC 20 s
ER35.93A.S00 14** 22/F05-F07 35 Nm 100-240 V AC 35 s
ER35.933.S00 14** 22/F05-F07 35 Nm 24 V AC/DC 35 s
ER60.93A.S00 17** 22/F05-F07 60 Nm 100-240 V AC 60 s
ER60.933.S00 17** 22/F05-F07 60 Nm 24 V AC/DC 60 s
ER100.933.S00 22/F05-F07 100 Nm 100-240 V AC 100 s
ER100.933.S00 22/F05-F07 100 Nm 24 V AC/DC 100 s
** X = removable plates with F03, F04 or F05 connection
EK 20/35/60/150
EK20
EK35-60
EK150
Description:
90° electric actuator, plastic housing with manual override by outgoing axle; for a torque of: 20-35-60Nm
Standard equipment:
3 tensions: 115, 230V AC and 24V AC/DC, 2 DIN 43650 connectors, 4 adjustable limit switches 5A, remova-
ble fixation plate with twin-norms F03-F04-F05 or F05-F07, star drive, manual override, torque limiter, mecha-
nical limit stops 90° +5°.
Technichal Data:
Duty rating at maximum torque: 30% of op. time , working temperature: -10°C to +55°C, electric connec-
tions: 2 connectors DIN43650, enclosure: IP65, weight 1,2kg, 2,5kg and 4 kg
VR/VS/VT
Description:
90° electric actuator, plastic housing + plastic or aluminium (optional) cover, with manual override by
outgoing axle or hand wheel; for a torque of: 25 to 1000Nm
Standard equipment:
VR-VS: Multi-voiltage actuator 100-240 V AC/ (125-320 V DC) or 24 V AC/DC or 400 V tri
VT: 400 VC tri, 230 V AC
4 adjustable limit switches 5A (VT=16A), fixation twin-norms F05-F07, F07-F10 or F10-F12, removable star
drive, manual override, torque limiter, mechanical limit stops (adjustable for VS and VT), visual position
indicator, regulated heating resistor 4W (except for VT and 400V tri: 10W)
Versions:
Version 3 points modulating or on-off
90° standard version, 180° or 270° on request
0-10V or 4-20mA positioning version (except VT and 400V tri)
Aluminium version on request
Technische Data:
Duty rating: 30% - 50% - 80% (depending on type), working temperature: -20°C to +70°C, electric
connections: 2 x ISO M20, IP68, Enclosure: IP67
weight VR=3,1kg, VS=5,6kg, VT=17,1kg.
VR/VS/VT
VRX/VSX
Description:
90° electric actuator, aluminium housing + aluminium cover, with manual override by outgoing axle
or hand wheel; for a torque of: 25 Nm bis 300 Nm
Standard equipment:
VRX-VSX: Multi-voltage actuator 100-240 V AC/ (125-320 V DC) or 24 V AC/DC or 400 V tri
4 adjustable limit switches 5A, fixation twin-norms F05-F07 or F07-F10, removable star drive, manual
override, torque limiter (except 400V), mechanical limit stops (adjustable for VSX), visual position indi-
cator, regulated heating resistor 4W (except 400V tri: 10W)
Versions:
Version 3 points modulating or on-off
90° standard version, 180° or 270° on request
0-10V or 4-20mA positioning version (except 400V tri)
Technische Daten:
Duty rating: 50% - 80%,
working temperature: -20°C to +70°C,
electric connections: 2 x ISO M20, Enclosure: IP67
weight VRX=4,9kg, VSX=6,9kg
This actuator type complies with the ATEX Standard “ATEX - II 2 GD Ex d IIB T6 - IP67 T80°”
(for 400 V and EBS.24 actuators: II 2 GD Ex d IIB T5 - IP67 T95°)
VRX/VSX
VRA/VSA
Description:
90° electric actuator, aluminium housing + aluminium cover, with
manual override by outgoing axle or hand wheel; for a torque of: 25
Nm bis 250 Nm
Standard equipment:
VRA-VSA: Multi-voltage actuators 100-240 V AC/ (125-320 V DC) or 24
V AC/DC
Versions:
Version 3 points modulating or on-off
90° standard version, 180° or 270° on request
0-10V or 4-20mA positioning version (except 400V tri)
Technical Data:
Duty rating: 80%
working temperature: -20°C to +60°C,
electric connections: 2 x 1/2” NPT, Enclosure: Type 4X IP67
weight VRA=4,9kg, VSA=6,9kg
This type complies with the standards CSA (C,US) / ANSI/UL and is therefore
appropriate to be distributed on the american continent
COMPANY PROFILE
Staff: 12
Torque:
- Double acting actuators from 7,3 Nm to 5405 Nm at
6 bar air pressure
- Single acting actuatos from 8,1 Nm to 2207 Nm at
6 bar air pressure
Turning range:
90° - 120° - 135° - 180°
SALES ORGANIZATION
Head office AIR TORQUE SpA certificated acc. to: ISO 9001
and Works: Via alla Campagna n. 1 Lloyd’s Register Q. A.
24060 Costa di Mezzate (BG) e-mail: info@airtorque.it
Tel.: +39-035-682299 Fax: +39-035-687791 Internet: www.airtorque.it
Affiliated Companies:
AIR TORQUE Deutschland GmbH A.T. (UK) LTD AIR TORQUE France
Im Katzentach 16-18 4a Sovereign Business Park, Parc d’Activitès de la
76275 Ettlingen Lathkill Street Verdière
certif. acc. to: DIN EN ISO 9001:2000 Market Harborough 13880 Velaux France
Tel.: +49-7243-5934 0 Leceistershire, LE 16 9EG Tel.: +33-4-42878400
Fax: +49-7243-5934 34 Tel.: +44-1858-468199 Fax: +33-4-42878404
e-mail: info@airtorque.de Fax: +44-1858-468187
Internet: www.airtorque.de e-mail: atukltd@aol.com
Internet: www.airtorque.co.uk
Main Distributors:
Extract of References: