You are on page 1of 1

888-999-7715 www.fastliftparts.com www.fastliftparts.

com 888-999-7715
Crown PTH Frame Crown PTH Frame
Serial #3-118400 and higher Serial #3-118400 and higher
Item Part No. Description Item Part No. Description
1 50000-015 Roll Pin 22 41127 Exit Roller
2 55018-001 Traverse Bearing 23 55007-001 Bushing
Upgraded
3 54011-001 Lube Fitting 24 41241 Load Roller Bracket (Pair) (Includes Items 5 and 23)
Load Rollers!
Ultra-Poly is a poly that is very hard, 4 50012-024 Snap Ring 25 41126 Pivot Axle
Older Style: but won’t shatter like nylon. 5 41201 Bushing 26 41203 Washer
Serial #3-183849 and lower. Ultra-poly is easier to roll than 6 50000-016 Roll Pin 27 65081-020 Bearing
regular poly and is non-marking! 7 41139 Bushing 28 82283-1-D Load Roller Assembly, Red Ultra-Poly On Aluminum
10 8 50000-017 Roll Pin Hub W/ Bearings
9 50008-025 Nut 82283-1 Load Roller Assembly, Black Ultra-Poly On Steel
9 10 50000-034 Roll Pin Hub W/ Bearings
11 11 50000-036 Roll Pin 82283-2 Load Roller Assembly, Nylon W/ Bearings
32 12 41252 Handle Axle 82283-3 Load Roller Assembly, Steel W/ Bearings

31 13 79850 Washer GWK-PTH-LW Load Wheel Kit, (2) Black Ultra-Poly (70D), Load
14 41249 Traverse Roller Assemblies, W/ Bearings, Axles & Fasteners
15 50000-012 Roll Pin GWK-PTH-CK Complete Wheel Kit, (2) Ultra-Poly Load Roller
16 41138 Bushing Assemblies (70D), (2) Poly Steer Wheel Assemblies,
12 17 41149 Shoulder Pin W/ Bearings, Axles & Fasteners
8 26 27
29
1 8 28 18 41129-002 Lifting Link, 27” Wide Jack 29 41202 Load Roller Axle
5
27 19 41137 Bushing 30 41140 Lifting Link Pin
13 26 20 41148 Pin 31 50007-021 Bolt
18 8 30
23 21 41141-002 Push Rod, 36” Forks 32 82203 Entry Roller
2
24 24 41141-004 Push Rod, 42” Forks
14 19
5 41141-006 Push Rod, 48” Forks KITS CR RPK Roll Pin Kit
22 23
3
8 25
4 17 21 15
7 Load Wheel Kit
15
16 20 GWK-PTH-LW
6

Complete Wheel Kit

Key differences:
Push rods -
PTH has ears, PTH50 has no ears.
Lifting Link -
PTH pins (item 20) are removable, PTH50 pins are
welded.
Load rollers -
Note:
PTH - 3-1/4” diameter, PTH50 - 3” diameter.
Traverse - Crown Roll Pin Kits Please confirm measurements before ordering:
PTH has long ears, PTH50 has a lip and short, Contain enough roll pins to repair two Load Roller 3.250” Diameter
GWK-PTH-CK
heavy-duty ears. newer style Crown PTH pallet jacks. Steer Wheel 8” Diameter

64 65
All manufacturers’ names, part numbers and descriptions are used for reference purposes only. All manufacturers’ names, part numbers and descriptions are used for reference purposes only.
We do not imply that any parts are the products of a particular manufacturer. Copyright © 2017 by Fast Lift Parts. All rights reserved. We do not imply that any parts are the products of a particular manufacturer. Copyright © 2017 by Fast Lift Parts. All rights reserved.

You might also like