Professional Documents
Culture Documents
Reference to Technical
Specifications articles BILL NO. 4 Fire Fighting / Protection, Items 22 – 28 and 33.
1
Index
2
1. Technical Data Sheet – Black Steel Seamless Pipes
3
www.trgometal.rs Trgometal d.o.o. EXPORT-IMPORT
ýHOLþQHEHãDYQHFHYL6HDPOHVVVWHHOSLSHV
2EOLNLPHUHEHãDYQLKFHYLNRMHVHLVSRUXþXMXVXXVNODGXVDVOHGHüLPVWDQGDUGLPD7KHVKDSHDQG
GLPHQVLRQVRIVHDPOHVVSLSHVZKLFKDUHGHOLYHUHGLQDFFRUGDQFHZLWKWKHIRORZLQJVWDQGDUGV
6536(1
,62
',1
$60(%0
$670$$670$
ý61
*267
7HKQLþNLXVORYL]DLVSRUXNXEHãDYQLKFHYLRGQHOHJLUDQLKþHOLNDVXXVNODGXVDVOHGHüLP
VWDQGDUGLPD7HFKQLFDOGHOLYHU\FRQGLWLRQVIRUVHDPOHVVWXEHVRIXQDOOR\HGVWHHOLQDFFRUGDQFHZLWKWKH
IROORZLQJVWDQGDUGV
6536(1$
',1',1',1
$670$$60(6$
ý61ý61
*267
7HKQLþNLXVORYL]DLVSRUXNXNRWORYVNLKEHãDYQLKFHYLVXXVNODGXVDVOHGHüLPVWDQGDUGLPD
7HFKQLFDOGHOLYHU\FRQGLWLRQVIRUVHDPOHVVERLOHUWXEHVLQDFFRUGDQFHZLWKWKHIROORZLQJVWDQGDUGV
6536(1$
',1
$670$$60(6$$670$$60(6$0
ý61
*267
.YDOLWHWþHOLNDEHãDYQLKFHYLMHVOHGHüL4XDOLW\RIVWHHOIRUVHDPOHVVVWHHOSLSHVLVDVIROORZV
6536(1 /*$/*$/*$/*$/*$/1%/1%
/1%
6536(1 6-5+6-2+6-+6-2+6-+61+
61+
6536(1$3753753753753753*+
3*+3*+;&U0R9;&U0R91E0R
&U0R&U0R
6536(1 ((((3131+(.(.
',1 6W6W6W
',1 6W6W6W
',1 56W6W6W6W6W
',1 6W6W0R&U0R&U0R0R9
;&U0R91E;&U0R9
$670$$670$ $%
$670$ *U*U
$670$ A
$670$ A1
ý61
ý61
ý61
*267 6W6W
6SROMDãQMDLXQXWUDãQMD]DãWLWDFHYLVHSRVHEQRXJRYDUD([WHUQDODQGLQWHUQDOSLSHSURWHFWLRQXSRQ
WKHDJUHHPHQW
326(%1,=$+7(9,.83$&$.2-,6(2'126(1$%(â$91(&(9,$.2-,1,682%8+9$û(1,
1$9('(1,067$1'$5',0$6(7$.2Ĉ(02*8,6381,7,&86720(5¶65(48,5(0(1765(/$7('72
6($0/(663,3(6:+,&+$5(127&29(5('%<7+(67$1'$5'6$/62&$1%(0(7
2 4
6SROMQLSUHþQLN 'HEOMLQD]LGD:DOOWKLFNQHVV>PP@
Outer diameter 2 2.3 2.6 2.9 3.2 3.6 4 4.5 5 5.6 6.3 7.1 8 8.8 10 11 12.5 14.2 16 17.5 20 22.2 25 28 30 40
>PP@ >LQFK@ 7HåLQD:HLJKW>NJP@
13.5 0.57 0.64 0.7
17.2 0.75 0.85 0.94 1.02 1.1 1.21
18 0.79 0.89 0.99 1.08 1.17 1.28 1.38 1.5
20 0.89 1 1.12 1.22 1.33 1.46 1.58 1.72 1.85 1.99
21.3 0.95 1.08 1.2 1.32 1.43 1.57 1.71 1.86 2.01 2.17
25 1.13 1.29 1.44 1.58 1.72 1.9 2.07 2.28 2.47 2.68
Trgometal d.o.o.
26.9 1.23 1.40 1.56 1.72 1.87 2.07 2.26 2.49 2.7 2.94 3.2
31.8 1 1.67 1.87 2.07 2.26 2.5 2.74 3.03 3.3 3.62 3.96 4.32 4.7
33.7 1.78 1.99 2.2 2.41 2.67 2.93 3.24 3.54 3.88 4.26 4.66 5.07
38 2.27 2.51 2.75 3.05 3.35 3.72 4.07 4.47 4.93 5.41 5.92
EXPORT-IMPORT
42.4 2.55 2.82 3.09 3.44 3.79 4.21 4.61 5.08 5.61 6.18 6.79 7.29 7.99
44.5 2.69 2.98 3.26 3.63 4 4.44 4.87 5.37 5.94 6.55 7.2 7.75 8.51
48.3 2.93 3.25 3.56 3.97 4.37 4.86 5.34 5.9 6.53 7.21 7.95 8.57 9.45
51 3.1 3.44 3.77 4.21 4.64 5.16 5.67 6.27 6.94 7.69 8.48 9.16 10.11
54 3.3 3.65 4.01 4.47 4.93 5.49 6.04 6.68 7.41 8.21 9.08 9.81 10.85
57 3.87 4.25 4.74 5.23 5.83 6.41 7.1 7.88 8.74 6.97 10.46 11.59 12.48
60.3 2 4.11 4.51 5.03 5.55 6.19 6.82 7.55 8.39 9.32 10.32 11.18 12.40 13.37 14.74
63.5 4.33 4.76 5.32 5.87 6.55 7.21 8 8.89 9.88 10.95 11.87 13.19 14.24 15.72
70 4.8 5.27 5.9 6.51 7.27 8.02 8.89 9.9 11.01 12.23 13.28 14.8 16.01 17.73
5
73 5.01 5.51 6.16 6.81 7.6 8.38 9.31 10.36 11.54 12.82 13.93 15.54 16.82 18.65
76.1 5.24 5.75 6.44 7.11 7.95 8.77 9.74 10.84 12.08 13.44 14.61 16.3 17.66 19.61 21.68 23.71
82.5 6.26 7 7.74 8.66 9.56 10.62 11.84 13.2 14.7 15.99 17.88 19.4 21.58 23.92 26.24
88.9 3 6.76 7.57 8.38 9.37 10.35 11.5 12.83 14.32 15.96 17.38 19.46 21.13 23.55 26.16 28.77
101.6 8.7 9.63 10.78 11.91 13.25 14.81 16.55 18.47 20.14 22.59 24.58 27.47 30.61 33.78
108 9.27 10.26 11.49 12.7 14.14 15.8 17.67 19.73 21.53 24.17 26.31 29.44 32.85 36.3 39.06
114.3 4 9.83 10.88 12.19 13.48 15.01 16.78 18.77 20.97 22.90 25.72 28.02 31.38 35.05 38.79 41.78
127 12.13 13.59 15.04 16.77 15.75 20.99 23.48 25.65 28.85 31.47 35.3 39.5 43.8 47.26 52.78 57.38 62.89 68.36 71.77
133 12.73 14.26 15.78 17.59 19.69 22.04 24.66 26.95 30.33 33.1 37.15 41.6 46.17 49.85 55.74 60.66 65.59 72.5 76.2
139.7 5 13.41 15 16.61 18.52 20.73 23.22 25.98 28.41 31.99 34.91 39.21 43.95 48.81 52.74 59.04 64.33 70.72 77.13 81.16
152.4 16.43 18.18 20.27 22.7 25.44 28.49 31.16 35.12 38.36 43.13 48.4 53.82 58.22 65.3 71.28 78.55 85.9 90.56
159 17.14 19.08 20.56 23.72 26.6 29.79 32.6 36.75 40.15 45.16 50.71 56.43 61.07 68.56 74.9 82.62 90.46 95.44 117.39
168.3 6 18.22 21.11 21.73 25.17 28.23 31.63 34.61 39.04 42.67 48.03 53.96 60.1 65.08 73.15 79.99 88.35 96.88 102.32 126.56
177.8 21.3 23.06 26.63 29.89 33.5 36.68 41.38 45.25 50.96 57.29 63.84 69.18 77.83 85.19 94.21 103.44 109.35 135.93
193.7 25.14 29.18 32.67 36.64 40.13 45.30 49.56 55.86 62.86 70.12 76.04 85.67 93.89 104.01 114.42 121.11 151.62
219.1 33.16 37.12 41.65 45.64 51.57 56.45 63.69 71.75 80.14 87.01 98.2 107.8 119.67 131.96 139.91 176.68
244.5 37.08 41.57 46.66 51.15 57.83 63.34 71.52 80.65 90.16 97.97 110.73 121.71 135.33 149.5 158.7 201.73
273 41.58 46.56 52.28 57.34 64.86 71.07 80.3 90.63 101.41 110.27 124.79 137.31 152.9 169.18 179.78 229.85
323.9 55.51 62.32 68.38 77.41 84.88 96 108.46 121.49 132.24 149.89 165.18 184.28 204.33 217.44 280.06
355.6 61 68.6 75.3 85.2 93.5 106 120 133 146 166 183 205 226.1 240.78 311.17
www.trgometal.rs
3
2. Inspection Certificate – EN 10204: 2004 / 3.1 Pipes
6
COD QC – 3.1 – Ed. 2 REV 5/2014
Additional remarks:
The requirements are fulfilled as per Annex 1- Test results
MILL INSPECTOR
UNTERSCHRIFT DES WERKSSACHVERSTÄNDIGEN
Eng. Constantin Lupu
THIS IS FOR CERTIFY THAT THE MATERIAL HEREIN DESCRIBED HAS BEEN MANUFACTURED WITH THE ORDERED SPECIFICATION AND
THAT INFORMATION IS CORRECT, THEY MEET THE SPECIFICATION’S REQUIREMENTS AND ARE RECORDS IN OUR COMPANY
DOCUMENTS.
7
COD QC – 3.1 – Ed. 2 REV 5/2014
Test Results
No : E3701
Part 2
Annex:1 ; Page no.: 1/1
Chemical Analysis (%)
C Mn S P Si Ni Cr Mo Cu Al Nb Ti N V
min min min min min min min min min min min min min min
max max max max max max max max max max max max max max
P235GH TC1 - - - - - - - - - 0.020 - - - -
EN10216-2 0.16 1.20 0.010 0.025 0.35 0.30 0.30 0.08 0.30 - 0.010 0.040 - 0.020
Ladle Chemical Analyse (%)
44266 0.13 0.52 0.001 0.009 0.21 0.09 0.07 0.02 0.21 0.023 0.001 0.001 0.009 0.003
Mechanical Properties
TENSILE TEST (EN ISO 6892-1) Rp0,2 Rm A Charpy V (J) (EN ISO 148-1)
– at room temperature- N/mm² N/mm² long Test Specimen
Test Specimen min min % Longitudinal 10 x10 [ mm]
max max
Strip - Longitudinal
P235GH TC1 235 360 25 Longitudinal 10 x 10 [mm]
EN10216-2 min 28 (-100 C)
- 500 -
heat no: 44266 Dimension (mm): 15.4 x 4.15 382 476 33
Section (mm²): 64.72
Length (Lo) (mm): 45
Drift expanding test Ring expanding test Flattening test Ring tensile test
Ringaufdornversuch Ringaufdornversuch Ring faltversuch Ring zugversuch
( EN ISO 8493) (EN ISO 8495 ) ( EN ISO 8492 ) (EN ISO 8496)
OK - OK -
Hydraulic test pressure (80 bar for 5 sec): OK Grain size ASTM E 112: 9.0
Melting process: electric arc furnace, fully killed
Visual inspection and dimensional check: OK
The manufacturer of pipes is certified by LRQA in accordance with: ISO 9001:08 (certificate no. 6007159 issued by 2015-08-10, valid until
2018-08-10), ISO 14001:04 (certificate no.6007157 issued by 2015-08-16, valid until 2018-08-10), OHSAS 18001:07 (certificate
no.6007158 issued by 2015-08-12, valid until 2018-08-10).
MILL INSPECTOR
UNTERSCHRIFT DES WERKSSACHVERSTÄNDIGEN
Eng. Constantin Lupu
THIS IS FOR CERTIFY THAT THE MATERIAL HEREIN DESCRIBED HAS BEEN MANUFACTURED WITH THE ORDERED SPECIFICATION AND
THAT INFORMATION IS CORRECT, THEY MEET THE SPECIFICATION’S REQUIREMENTS AND ARE RECORDS IN OUR COMPANY
DOCUMENTS.
8
COD QC – 3.1 – Ed. 2 REV 5/2014
Additional remarks:
The requirements are fulfilled as per Annex 1- Test results
MILL INSPECTOR
UNTERSCHRIFT DES WERKSSACHVERSTÄNDIGEN
Eng. Constantin Lupu
THIS IS FOR CERTIFY THAT THE MATERIAL HEREIN DESCRIBED HAS BEEN MANUFACTURED WITH THE ORDERED SPECIFICATION AND
THAT INFORMATION IS CORRECT, THEY MEET THE SPECIFICATION’S REQUIREMENTS AND ARE RECORDS IN B OUR COMPANY
DOCUMENTS.
9
COD QC – 3.1 – Ed. 2 REV 5/2014
Test Results
No : E17389
Part 2
Annex:1 ; Page no.: 1/1
Chemical Analysis (%)
C Mn S P Si Ni Cr Mo Cu Al Nb Ti N V
min min min min min min min min min min min min min min
max max max max max max max max max max max max max max
P235GH TC1 - - - - - - - - - 0.020 - - - -
EN10216-2 0.16 1.20 0.010 0.025 0.35 0.30 0.30 0.08 0.30 - 0.010 0.040 - 0.020
Ladle Chemical Analyse (%)
45674 0.12 0.55 0.004 0.010 0.20 0.07 0.04 0.01 0.24 0.024 0.001 0.001 0.008 0.002
Mechanical Properties
TENSILE TEST (EN ISO 6892-1) Rp0,2 Rm A Charpy V (J) (EN ISO 148-1)
– at room temperature- N/mm² N/mm² long Test Specimen
Test Specimen min min % Longitudinal 10 x10 [ mm]
max max
Strip - Longitudinal
P235GH TC1 235 360 25 Longitudinal 10 x 10 [mm]
EN10216-2 min 28 (-100 C)
- 500 -
heat no: 45674 Dimension (mm): 15.4 x 4.05 380 471 34
Section (mm²): 62.85
Length (Lo) (mm): 45
Drift expanding test Ring expanding test Flattening test Ring tensile test
Ringaufdornversuch Ringaufdornversuch Ring faltversuch Ring zugversuch
( EN ISO 8493) (EN ISO 8495 ) ( EN ISO 8492 ) (EN ISO 8496)
OK - OK -
Hydraulic test pressure (80 bar for 5 sec): OK Grain size ASTM E 112: 9.0
Melting process: electric arc furnace, fully killed
Visual inspection and dimensional check: OK
The manufacturer of pipes is certified by LRQA in accordance with: ISO 9001:08 (certificate no. 6007159 issued by 2015-08-10, valid until
2018-08-10), ISO 14001:04 (certificate no.6007157 issued by 2015-08-16, valid until 2018-08-10), OHSAS 18001:07 (certificate
no.6007158 issued by 2015-08-12, valid until 2018-08-10).
MILL INSPECTOR
UNTERSCHRIFT DES WERKSSACHVERSTÄNDIGEN
Eng. Constantin Lupu
THIS IS FOR CERTIFY THAT THE MATERIAL HEREIN DESCRIBED HAS BEEN MANUFACTURED WITH THE ORDERED SPECIFICATION AND
THAT INFORMATION IS CORRECT, THEY MEET THE SPECIFICATION’S REQUIREMENTS AND ARE RECORDS IN B OUR COMPANY
DOCUMENTS.
10
3. Technical Data Sheet – Victaulic Couplings and Fittings
11
Victaulic® QuickVic™ Flexible Coupling
Style 177N 06.24
2.0 CERTIFICATION/LISTINGS
NOTES
• See submittal 10.01: Victaulic Products for Fire Protection Piping Systems - Regulatory Approval Reference Guide for details.
• See submittal 02.06: Victaulic Potable Water Approvals ANSI/NSF for potable water approvals if applicable.
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
victaulic.com
06.24 9402 Rev J Updated 07/2017 © 2017 Victaulic Company. All rights reserved.
1
12
victaulic.com
4.0 DIMENSIONS
Style 177N - Dimensions for Determining Piping System Installation Clearances
Data in the below table is provided for system layout and installation purposes to ensure that adequate clearances
are included in the piping system installation relative to other piping components or the building structure for both roll
grooved and cut grooved pipe.
This is particularly important when the system is free floating, or contains no thrust anchors, and the coupling joints
are installed with the pipe ends butted against the gasket4. If installed in this condition, when the piping is pressurized
the joints will open to their full nominal pipe end separation5. This movement is cumulative and will be most
significant in long runs of piping where multiple flexible couplings are installed in the butted condition.
Y Z Y Z
X X
Figure 1 Figure 2
06.24 9402 Rev J Updated 07/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 3
13
victaulic.com
4.1 DIMENSIONS
Design and Installation - Linear Movement and Angular Deflection
Data in the table below provides the linear movement and joint deflection capabilities of each coupling. These
mechanical properties of the flexible coupling can be used in the design of the piping system to accommodate curves
in the piping system, settlement of the building structure, seismic movement, or thermally induced expansion or
contraction of the piping.
The linear movement7 can be used to accommodate any axial movement of the piping caused by thermally induced
expansion or contraction of the pipe. When used in this manner, thrust anchors must be installed at changes in
direction, at the ends of straight runs, or to divide long runs of pipe into more manageable sections and reduce
movement at branch connections. Reference should be made to Victaulic Publication 26.02 for detailed instructions
regarding determining thrust anchor or guide locations.
The joint deflection8,9 can also be used to accommodate the axial change in length of the piping caused by thermally
induced expansion or contraction of the piping through the controlled deflection of offsets at existing changes in
direction of the piping. Again, refer to Victaulic Publication 26.02 for detailed instructions.
Joint Deflection9
Actual Linear
Size Outside Movement Slope of
Range Diameter per Coupling6,9 Angle at Coupling7 Pipe8
inches inches inches Degrees per in/ft
DN mm mm coupling mm/m
2 2.375 0.09 0.46
2.17
DN50 60.3 2.3 38.1
2 1/2 2.875 0.09 0.38
1.79
73.0 2.3 31.5
3.000 0.09 0.36
DN65 1.72
76.1 2.3 30.2
3 3.500 0.09 0.31
1.47
DN80 88.9 2.3 25.9
4.250 0.18 0.51
2.43
108.0 4.6 42.6
4 4.500 0.18 0.48
2.29
DN100 114.3 4.6 40.3
5.250 0.18 0.41
1.96
133.0 4.6 34.6
5.500 0.18 0.39
1.88
139.7 4.6 32.9
5 5.5625 0.18 0.39
1.85
141.3 4.6 32.4
6.250 0.18 0.35
1.65
159.0 4.6 28.9
6.500 0.18 0.33
1.59
165.1 4.6 27.9
6 6.625 0.18 0.33
1.56
DN150 168.3 4.6 27.3
8 8.625 0.18 0.25
1.20
DN200 219.1 4.6 21.0
6 This is the actual net linear movement available at each coupling for design purposes as illustrated in Figures 1 and 2.
7 This is the actual net deflection angle available at each coupling listed in degrees as illustrated in Figure 3.
8 This is the actual net deflection angle available at each coupling listed as a slope of the pipe as illustrated in Figure 4.
9 These values are the net amount of linear movement or joint deflection available at the couplings. No further reduction,
as detailed in Victaulic Publication 26.02, is needed to allow for design and installation purposes.
Foot/m
inches/mm
Θ
06.24 9402 Rev J Updated 07/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 4
14
victaulic.com
5.0 PERFORMANCE
Style 177N – ANSI/ISO Standards
06.24 9402 Rev J Updated 07/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 5
15
Victaulic® QuickVic™ Rigid Coupling
Style 107N 06.23
2 - 12"/50 - 300 mm
2.0 CERTIFICATION/LISTINGS
NOTES
• See Submittal 10.01: Victaulic Products for Fire Protection Piping Systems - Regulatory Approval Reference Guide for details.
• See Submittal 02.06: Victaulic Potable Water Approvals ANSI/NSF for potable water approvals if applicable.
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
victaulic.com
06.23 7470 Rev C Updated 04/2017 © 2017 Victaulic Company. All rights reserved.
1
16
victaulic.com
4.0 DIMENSIONS
Style 107N
Y Z Y Z
X X
Pre-Assembled
Joint Assembled
(Installation-Ready™ Condition)
Pipe End
Size Separation3 Bolt/Nut4 Dimensions Weight
Actual Pre-Assembled
Outside (Installation-Ready™ Condition) Joint Assembled Approximate
Nominal Diameter Allowable Qty. Size X Y X Y Z (Each)
inches inches inches inches inches inches inches inches inches lb
DN mm mm mm mm mm mm mm mm kg
2 2.375 0.15 1/2 x 3 4.00 6.13 3.63 6.13 2.13 2.7
2
DN50 60.3 3.8 M12 x 76 100 156 92 156 54 1.2
2 1/2 2.875 0.15 1/2 x 3 4.50 6.75 4.00 6.75 2.13 3.0
2
73.0 3.8 M12 x 76 114 171 102 171 54 1.4
3.000 0.15 1/2 x 3 4.63 6.88 4.13 6.88 2.13 3.1
2
DN65 76.1 3.8 M12 x 76 118 175 105 175 54 1.4
3 3.500 0.15 1/2 x 3 1/4 5.25 7.38 4.63 7.50 2.13 3.7
2
DN80 88.9 3.8 M12 x 83 133 187 118 191 54 1.7
4 4.500 0.15 1/2 x 3 1/4 6.63 8.75 5.88 8.75 2.13 5.1
2
DN100 114.3 3.8 M12 x 83 168 222 149 222 54 2.3
4.250 0.15 1/2 x 3 1/4 6.38 8.50 5.75 8.50 2.13 4.7
2
108.0 3.8 M12 x 83 162 216 146 216 54 2.1
5 5.563 0.15 5/8 x 4 7.75 10.25 7.13 10.25 2.25 7.0
2
141.3 3.8 M16 x 101 197 260 181 260 57 3.2
5.250 0.15 5/8 x 4 7.50 10.00 6.75 9.88 2.25 6.1
2
133.0 3.8 M16 x 101 191 254 171 251 57 3.0
5.500 0.15 5/8 x 4 7.75 10.25 7.00 10.13 2.25 6.7
2
DN125 139.7 3.8 M16 x 101 197 260 178 257 57 3.0
6 6.625 0.15 5/8 x 4 8.88 11.38 8.13 11.25 2.25 8.2
2
DN150 168.3 3.8 M16 x 101 226 289 207 286 57 3.7
6.250 0.15 5/8 x 4 8.50 11.00 7.75 10.88 2.25 7.6
2
159.0 3.8 M16 x 101 216 279 197 276 57 3.4
6.500 0.15 5/8 x 4 8.75 11.25 8.00 11.13 2.25 7.9
2
165.1 3.8 M16 x 101 222 286 203 283 57 3.6
8.515 0.22 3/4 x 5 11.25 14.25 10.38 14.13 2.63 15.0
2
216.3 5.6 M20 x 127 286 362 264 359 67 6.8
8 8.625 0.22 3/4 x 5 11.25 14.37 10.50 14.25 2.63 15.1
2
DN200 219.1 5.6 M20 x 127 286 365 267 362 67 6.8
10 10.750 0.20 7/8 x 61/2 13.25 17.00 13.00 17.13 2.75 23.6
2
DN250 273.0 5.1 M22 x 165 337 432 330 435 70 10.7
12 12.750 0.20 7/8 x 61/2 15.63 19.00 15.00 19.00 2.75 27.2
2
DN300 323.9 5.1 M22 x 165 397 483 381 483 70 12.3
3 The allowable pipe end separation dimension shown is for system layout purposes only. Style 107N QuickVic™ rigid couplings are considered rigid connections
and will not accommodate expansion or contraction of the piping system.
4 Number of bolts required equals number of housing segments.
06.23 7470 Rev C Updated 04/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 3
17
victaulic.com
5.1 PERFORMANCE
Style 107N – ISO Standard
Size ISO Wall Pipe
Maximum Maximum Maximum Maximum
Actual Outside Joint Working Permissible Joint Working Permissible
Nominal Diameter Wall Thickness Pressure6 End Load6 Wall Thickness Pressure6 End Load6
inches inches inches psi lb inches psi lb
DN mm mm kPa N mm kPa N
2 2.375 0.091 750 3323 0.157 750 3323
50 60.3 2.3 5171 14781 4.0 5171 14780
3.000 0.150 600 4239 0.200 750 5299
DN65 76.1 3.8 4135 18856 5.1 5170 73571
3 3.500 0.114 600 5773 0.197 750 7216
80 88.9 2.9 4135 25680 5.0 5171 32098
4 4.500 0.126 600 9543 0.220 750 11928
100 114.3 3.2 4137 42449 5.6 5171 53058
4.250 0.114 600 8507 0.220 750 10634
108.0 2.3 4135 37841 5.6 5170 47302
5.250 0.142 500 10818 0.248 750 16227
133.0 3.6 3447 48121 6.3 5170 72181
5.500 0.150 500 11873 0.220 750 17810
DN125 139.7 3.8 3447 52814 5.6 5170 79223
6 6.625 0.157 500 17236 0.280 700 24130
150 168.3 4.0 3450 76670 7.1 4826 107335
6.250 0.197 500 15332 0.276 700 21465
159.0 5..0 3447 68200 7.0 4825 95481
6.500 0.134 500 16583 0.276 700 23216
165.1 3.4 3447 73765 7.0 4825 103270
8.515 0.228 300 17075 0.315 600 34150
216.3 5.8 2070 75953 8.0 4135 151907
8 8.625 0.177 300 17528 0.315 600 35056
200 219.1 4.5 2070 77970 8.0 4137 155936
10 10.750 0.228 300 27200 0.248 500 45400
250 273.0 5.8 2065 121040 6.3 3450 202030
12 12.750 0.264 200 25500 0.307 400 51000
300 323.9 6.7 1375 113475 7.8 2750 226950
6 Working Pressure and End Load are total, from all internal and external loads, based on ISO 4200 sized carbon steel pipe, grooved in accordance with
Victaulic specifications. Contact Victaulic for performance on other pipe.
NOTES
• WARNING: FOR ONE-TIME FIELD TEST ONLY, the Maximum Joint Working Pressure may be increased to 11/2 times the figures shown.
• LPCB and VdS approved for DIN wall pipe (6.3mm thickness) for 10" rated to 232 psi/16 bar, (7.8mm thickness) for 12" rated to 232 psi/16 bar.
• FM approved on schedule 10 pipe: 2-4 inch sizes rated to 400 psi/28 bar; 5-6 inch sizes rated to 300 psi/21 bar; and 8 and 10 inch sizes (.188" wall
thickness) rated to 300 psi/21 bar. FM approved on schedule 40 pipe: 2-4 inch sizes rated to 600 psi/41 bar; 5-6 inch sizes rated to 500 psi/34 bar; and 10
and 12 inch sizes rated to 400 psi/28 bar. Includes all metric sizes in range.
• UL listed on schedule 10 pipe: 2, 2 ½, 3 and 4 inch sizes rated to 400 psi; and 6, 8 and 10 inch sizes rated to 300 psi. Schedule 40 pipe: 2, 2 ½ and 3 inch
sizes rated to 600 psi; 4 inch rated to 450 psi; and 6, 8, 10 and 12 inch sizes rated to 400 psi.
06.23 7470 Rev C Updated 04/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 5
18
Victaulic® Grooved End Fittings
07.01
ALWAYS REFER TO ANY NOTIFICATIONS AT THE END OF THIS DOCUMENT REGARDING PRODUCT INSTALLATION, MAINTENANCE OR SUPPORT.
victaulic.com
07.01 1449 Rev AF Updated 08/2017 © 2017 Victaulic Company. All rights reserved.
1
19
victaulic.com
Stainless Steel
Publication 17.16 XL fittings for abrasive services
Publication 07.07
Galvanized
Publication 07.01 for Original Groove Fittings
Publication 20.05 for AGS Fittings Aluminum
Publication 21.03
Shouldered Ends
Publication 07.06
Copper
Publication 22.04
Plain End
Publication 14.04
07.01 1449 Rev AF Updated 08/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 2
20
victaulic.com
4.0 DIMENSIONS
Elbows
No. 10 90° Elbow
No. 11 45° Elbow C to E
No. 12 22 1/2° Elbow E to E
No. 13 11 1/4° Elbow C to E
C to E
No. 100 90° Long C to E
Radius Elbow C
C to E
C to E
No. 110 45° Long to E
Radius Elbow
Standard and
GSNK
07.01 1449 Rev AF Updated 08/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 4
21
victaulic.com
4.3 DIMENSIONS
Tees, Crosses and True Wyes
C to E
C to E C to LE C to
GE
C
to
E C to C to TE
SE
07.01 1449 Rev AF Updated 08/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 7
22
victaulic.com
4.4 DIMENSIONS
Reducing Tee
C to E C to E
No. 25 Grooved Branch
No. 29T Threaded Branch
C C
to to
C to E C to E E E
07.01 1449 Rev AF Updated 08/2017 © 2017 Victaulic Company. All rights reserved.
victaulic.com 9
23
Victaulic® Vic-Flange® Adapters
Styles 741 and 743 06.06
Rev P
Product Description
Style 741
Style 741 Vic-Flange® adapter is designed for directly
incorporating flanged components with ANSI CL. 125 or
CL. 150/PN10 and PN16 or Australian Standard Table
E bolt hole patterns into a grooved pipe system. Sizes
2 – 12”/50 – 300 mm are hinged for easy handling
with integral end tabs which facilitate assembly. Sizes
Style 741
2 − 12” sizes/50 − 300 mm
Exaggerated for clarity 14 – 24”/350 – 600 mm are cast in four (4) identical
segments which are interconnected as assembly is
completed.
The design incorporates small teeth inside the key
shoulder I.D. to prevent rotation (excluding 159 mm size).
These teeth should be removed when Vic-Flange adapter
is utilized with a Victaulic Series 700 grooved end
butterfly valve, Schedule 5 pipe or plastic pipe.
Vic-Flange adapter Style 741 is not recommended for
use with Victaulic Series 709 butterfly valves (contact
Victaulic for recommendations). They may only be used
Style 741 on one side of Victaulic Series 700 butterfly valve, sizes
Exaggerated for clarity
14 − 24” sizes/350 − 600 mm 2 – 4”/50 – 100 mm fitted with standard or lever-lock
handles. Vic-Flange adapter must be assembled so it
does not interfere with handle operation.
Style 743
Vic-Flange Style 743 flange-to-groove adapter permits
direct connection of ANSI Class 300 flanged components
into a grooved system. The two-piece, hinged housing
engages into the pipe groove and bolts directly to any
standard flanged component. The conventional bolt hole
pattern allows for easy, fast assembly. Style 743 rotates
Style 743 Exaggerated for clarity
360º for proper alignment of bolt holes before tightening.
Approvals/Listings Vic-Flange gaskets utilize the Victaulic pressure-
responsive design, sealing on the pipe end and directly
to the opposing flange face. No standard flange gasket is
required.
See Victaulic publication 10.01 for details
See Victaulic publication 02.06 for portable water approvals if applicable. Style 743 is designed to mate with raised-face flanges,
but can be used with flat-face flanges by removing the
raised projections on the outside face of the flange.
Job/Owner Engineer
System No. Spec Section
Location Paragraph
Contractor Approved
Submitted By Date
Date
1
24
victaulic.com | Couplings | Adapters | Styles 741 and 743 | Publication 06.06
Style 741
Sizes 50 – 300 mm/ 2 – 12”
PN10 and PN16 Flanges
Z
Mating
Vic- Flange
Flange
X Y W
A B
Proper Gasket Positioning Max. Min.
06.06 1534 Rev Q Updated 11/2014 © 2014 Victaulic Company. All rights reserved.
victaulic.com 4
25
4. Certificate of Conformance - Victaulic
26
02.05
CERTIFICATE OF CONFORMANCE
Victaulic® is an ISO 9001 certified company. Our standard materials conform to the following ASTM, ASME or ISO standards as applicable:
Nuts and Bolts Carbon Steel: ASTM A449 and ASTM A563 – Grade A or B
ISO 898-1 Part 1 – Class 9.8 or 8.8 and ASTM A563M – Class 9
Stainless Steel: ASTM A193 – Class 2, Grade B8M and ASTM A194 – Grade 8M, Heavy Hex
ASTM F738M – Class A4-80 and ASTM F836M – Class A4-80
ASTM F593 – Group 2, Condition CW, Alloy 316 and
ASTM F594 – Group 2, Condition CW, Alloy 316
ISO 3506 – Grade A4-80 or A4-70
Vic Rings ASME SA105 / ASTM A105 or ASME SA105N / ASTM A105N
02.05
27
5. ISO 9001:2008 Certificate - Victaulic
28
Certificate of Management
System Registration
Certificate Number: 104 Issue: 09
Victaulic Company
ISO 9001:2008
Quality Management Systems – Requirements
is authorised to use the LPCB Certification Mark on stationery and publications related to the
following products and/or services:
This certificate and appendix is maintained and held in force through regular surveillance activities.
This certificate and appendix remains the property of BRE Global Limited and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms).
To check the validity of this certificate and appendix please scan the QR tag, visit
www.redbooklive.com/check or contact us.
LPCB is part of BRE Global Ltd., Garston, Watford WD25 9XX.
T: +44 (0)333 321 8811 F: +44 (0)1923 664603 E: Enquiries@breglobal.com
Company Scope
Victaulic Company Casting of pipe couplings, fittings and related accessories.
8023 Quarry Road
Alburtis
Pennsylvania 18011
USA
Victaulic Company Design and manufacture of elastomeric molds.
Mold Technology Centre (MTC)
2860 Bath Pike
Suite 300
Nazareth
Pennsylvania 18064
USA
This certificate and appendix is maintained and held in force through regular surveillance activities.
This certificate and appendix remains the property of BRE Global Limited and is issued
subject to terms and conditions (for details visit www.redbooklive.com/terms)
To check the validity of this certificate and appendix please scan the QR tag, visit
www.redbooklive.com/check or contact us.
LPCB is part of BRE Global Ltd., Garston, Watford WD25 9XX.
T: +44 (0)333 321 8811 F: +44 (0)1923 664603 E: Enquiries@breglobal.com