Professional Documents
Culture Documents
com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
ABCT-0245 2 8X9 45
ABCT-0260 2 8X9 60
ABCT-0270 2 8X9 70
ABCT-0445 4 8X9 45
ABCT-0460 4 8X9 60
ABCT-0470 4 8X9 70
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
ABC-0245 2 8X9 45
ABC-0260 2 8X9 60
ABC-0270 2 8X9 70
ABC-0445 4 8X9 45
ABC-0460 4 8X9 60
ABC-0470 4 8X9 70
ABE-0245 2 14 X 16 45
ABE-0260 2 14 X 16 60
ABE-0270 2 14 X 16 70
ABE-0245 4 14 X 16 45
ABE-0260 4 14 X 16 60
ABE-0270 4 14 X 16 70
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
BBP-0245 2 20 X 22 45
BBP-0260 2 20 X 22 60
BBP-0270 2 20 X 22 70
BBP-0445 4 20 X 22 45
BBP-0460 4 20 X 22 60
BBP-0470 4 20 X 22 70
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
AWS PROBE
Good sensitivity
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
BD-124 1 24 Lemo 1 equivalent
BD-224 2 24 Lemo 1 equivalent
BD-424 4 24 Lemo 1 equivalent
12mm probe
20mm probe
24mm probe
CD-10 transducer is designed for thickness gauging and near surface flaw
detection. (similar to WK WD-10)
Subvis are standard connector, Lemo00 and Microdot connector also
available.
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
Creep Waves are high angle ultrasonic longitudinal waves. The creeping
wave is actually the upper part of the envelope of a 76 degree compression
wave beam which propagates just under the component surface, see Figure.
These are not true surface waves and the energy is concentrated within a few
millimetres of, and almost parallel to, the surface. Hence, the technique is
very sensitive to shallow surface-breaking cracks whilst at the same time
being relatively insensitive to surface condition.
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
Creep waves have the advantage that, being longitudinal waves, they are far
less attenuated in austenitic and inconel weld metal than shear waves.
2P10X15
2 10x15 Lemo00 18x23x28x3
76L
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
2P10X15
2 10x15 Lemo00 18x23x28x3
86L
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
Connector: Lemo 00
Index Point : 17mm
PR/AD : UT3100
Type : PR/AD
Pulse Voltage : 300 V
Pulse Width : 200 ns
Damping : 620 ohm
Gain dB :28db
Sampling Rate : 100 MHz
PRF : 100
Measure Data
Peak Frequency :2.246 MHz
Center Frequency : 2.288MHz
Upper Frequency : 2.873MHz
Lower Frequency : 1.704 MHz
Bandwidth(-6dB) :51.078 %
P/N PROBE ANGLE CONNECTOR
AWS-2.25-45’ 45 DEGREE Lemo 00
AWS-2.25-60’ 60 DEGREE Lemo 00
AWS-2.25-70’ 70 DEGREE Lemo 00
PRICE INCL.MAKER CERTIFICATE & PROBE CASE
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
Immersion Transducers
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
Feature:
- Easy To Handle
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
Remark:
Special design for high noise material, such as: Aust S.S. and Duplex
S.S. weld inspection
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
FS=Foucs SoundPath
Sound Case
FREQ CRYSTAL ANGLE Probe
P/N Pass Dimension
MHz SIZE mm Degree connector
FS=mm mm
1.5P10X20L45F20 1.5 10x20 45 20 30x30x25 Lemo 00
1.5P10X20L60F20 1.5 10x20 60 20 30x30x25 Lemo 00
1.5P10X20L70F20 1.5 10x20 70 20 30x30x32 Lemo 00
1.5P15x25L45F32 1.5 15x25 45 32 40x40x32 Lemo 00
1.5P15x25L60F28 1.5 15x25 60 28 40x40x32 Lemo 00
1.5P15x25L70F25 1.5 15x25 70 25 40x40x32 Lemo 00
1.5P20x30L45F47 1.5 20x30 45 47 50x50x38 Lemo 00
1.5P20x30L60F32 1.5 20x30 60 32 50x50x38 Lemo 00
1.5P20x30L70F30 1.5 20x30 70 30 50x50x38 Lemo 00
2P10X15L45F20 2 10x15 45 20 30x30x25 Lemo 00
2P10X15L60F17 2 10x15 60 17 30x30x25 Lemo 00
2P10X15L70F15 2 10x15 70 15 30x30x25 Lemo 00
2P10X20L45F28 2 10x20 45 28 30x30x25 Lemo 00
2P10X20L60F23 2 10x20 60 23 30x30x25 Lemo 00
2P10X20L70F20 2 10x20 70 20 30x30x25 Lemo 00
2P15x25L45F45 2 15x25 45 45 40x40x32 Lemo 00
2P15x25L60F38 2 15x25 60 38 40x40x32 Lemo 00
2P15x25L70F35 2 15x25 70 35 40x40x32 Lemo 00
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
2P20x35L45F70 2 20x35 45 70 60x60x38 Lemo 00
2P20x35L60F60 2 20x35 60 60 60x60x38 Lemo 00
2P20x35L70F50 2 20x35 70 50 60x60x38 Lemo 00
4P10X15L45F33 4 10x15 45 33 30x30x25 Lemo 00
4P10X15L60F28 4 10x15 60 28 30x30x25 Lemo 00
4P10X15L70F23 4 10x15 70 23 30x30x25 Lemo 00
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TM-08 TC510
HT5
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TM-600 work Panametrics thickness gauge
Applications
- General weld inspection,smaller object,thinner section
- Tube,pipes,pressure vesseis,containers
- Pumps,valve housing
- Wheel rims
Features
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
- Good Resolution and Sensitivity
- Custom wedge angel and curvatures can be special ordered
- Both quick change and screw mounted style available
- Microdot or Subvis connector top mount
TEL:86-10-89444420 FAX:86-10-89445181
www.tmteck-ndt.com
TEL:86-10-89444420 FAX:86-10-89445181