You are on page 1of 2

01/05/2019 Hydrovision Q-Eye Radar MT radar doppler

Discharge Measurement All Products Hydrovision Q-Eye Radar MT radar doppler Back

Hydrovision Q-Eye Radar MT radar doppler


Category: Discharge Measurement - Sensors , Data Logger , Complete systems
Cost-effective measuring system for stationary flow measurement in streams, rivers and
channels, consisting of type MT measurement transducer and a contactless RV Radar Doppler
Sensor
Wireless programming and configuration via WLAN and browser (smartphone, tablet, laptop)
with the "SetUp" software
1D RV30 Radar Doppler Velocity Sensor for the precise measurement of the surface water
velocity
Possibility of connecting the existing sensors (analog / digital) for water level measurement
Connection option via MODBUS, 0/4-20 mA to external process control systems or loggers

Benefits Application Accessories Specifications Downloads

Optimised:
The Q-Eye Radar MT is a modern measurement transducer, specially developed by
Hydro Vision and optimised for stationary flow measurement with the 1D RV30 Radar
Doppler Sensor. For the connection of further external sensors (e.g. Radar pulse, DS 22)
a total of four analog input channels ara available. An internal 16GB Micro SD card
ensures safe storage of the measured values. The data transmission and remote
maintenance is optionally executed with an integrated GSM/GPRS modem. Additionally,
MT Q-Eye Radar can be easily connected to external data collectors or process control
systems via analog and digital output signals.

https://www.seba-hydrometrie.com/products.html?type=98&L=1&tx_sebaproducts_sebaproducts%5Bproduct%5D=55&tx_sebaproducts_sebapro… 1/2
01/05/2019 Hydrovision Q-Eye Radar MT radar doppler
Modern ease of use:
The configuration of the MT measuring transducer and the visualisation of data is
accomplished quite simply via WLAN using any browser either by using a smartphone,
tablet, laptop or PC, without the need to install any additional software or applications!
All characteristics specific to the measuring points (measuring cross section, k-factors,
inputs and outputs, measurement intervals, etc.) can be very easily configured with the
installed "SetUp" software. Of course, current and past measurement data can be
graphically displayed on-site.
Insensitive and virtually maintenance free:
Since the RV30 does not come into direct contact with the water, there is no ensuing
damage from floating debris and contamination caused by sloughing, silting, adhesion of
algae or shellfish. Unlike the travel-time method or H-ADCPs, the RV30 measures the
flow rate reliably even in overgrown waters.
Cost-effective, easy installation:
The RV30 is relatively easy to install on existing bridges or mast booms. Time-
consuming and therefore expensive underwater works for fixing of sensors and routing of
signal cables omitted in cross-section measurement.
Self-sufficient:
Owing to the low energy consumption, the Q-Eye-PSC MT can be supplied with 12 V
replacement batteries or solar panels.

https://www.seba-hydrometrie.com/products.html?type=98&L=1&tx_sebaproducts_sebaproducts%5Bproduct%5D=55&tx_sebaproducts_sebapro… 2/2

You might also like