Professional Documents
Culture Documents
https://gw-mdsy.s3-accelerate.amazonaws.com/2019/student/profile/154434
Ashish Garg
(Enroll User) Sign out
HOME
Q. 1
MY TEST
For a circular shaft subjected to pure torsion allowable twist is 1.5° and length of shaft is 1 m. Maximum
allowable shear stress is 1200 kg/cm2 and modulus of rigidity is G = 1 × 106 kg/cm2. What will be the
BOOKMARKS
diameter of shaft?
FAQ Have any Doubt ?
MY PROFILE
A
REPORTS 9.1672 cm
Correct Option
BUY PACKAGE
Solution :
ASK AN EXPERT (a)
OFFER
B
4.5836 cm
C
9.1672 mm
D
4.5836 mm
QUESTION ANALYTICS
Q. 2
A
Buckling
B
Both crushing and buckling equally
C
Crushing
Correct Option
Solution :
(c)
Column with slenderness ratio of 8 comes under the category of short column which fails by crushing.
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 1/10
2/16/2019 MADE EASY ONLINE TEST SERIES
g y y g
Ashish Garg
D (Enroll User) Sign out
None of the above
QUESTION ANALYTICS
Ashish Garg Q. 3
Course: GATE
Wire winding is a technique which is used for providing residual compressive stress. This technique can be
Mechanical Engineering (ME)
used in
FAQ Have any Doubt ?
HOME
A
MY TEST In thin pressure vessel
Correct Option
BOOKMARKS
Solution :
MY PROFILE (a)
REPORTS
B
In thick pressure vessel
BUY PACKAGE
ASK AN EXPERT C
(a) and (b) both
OFFER
QUESTION ANALYTICS
Q. 4
Which of the following graph represents the correct relation between various hardness numbersand applied
load,
FAQ Have any Doubt ?
Correct Option
Solution :
(a)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 2/10
2/16/2019 MADE EASY ONLINE TEST SERIES
C Ashish Garg
(Enroll User) Sign out
Ashish Garg
Course: GATE
Mechanical Engineering (ME) D
HOME
MY TEST
BOOKMARKS
MY PROFILE
QUESTION ANALYTICS
REPORTS
BUY PACKAGE
Q. 5
ASK AN EXPERT A mild steel specimen is tested under UTM (Universal Testing Machine) then the value of Young’s modulus
was 200 GPa. If the same mild steel specimen with carbon percentage 0.05% more than previous specimen
OFFER is tested under UTM. What will be value of Young’s modulus of new specimen?
FAQ Have any Doubt ?
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK A
PACKAGES
200 GPa
Correct Option
Solution :
(a)
Young’s modulus of steels remains unaffected with change in carbon percentage.
B
210 GPa
C
190 GPa
D
None of these
QUESTION ANALYTICS
Q. 6
A long column whose one end is fixed and another is free having a length of 800 mm and radius of gyration
as 10 mm. The value of buckling stress will be _________ MPa.
[Take Young’s modulus of material as 150 GPa]
FAQ Have any Doubt ?
Solution :
57.83 (57.5 - 58.5)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 3/10
2/16/2019 MADE EASY ONLINE TEST SERIES
Ashish Garg
QUESTION ANALYTICS (Enroll User) Sign out
Q. 7
The value of slenderness ratio of a column whose both ends are fixed and having a length of 50 mm and
radius of gyration 20 mm is _______.
FAQ Have any Doubt ?
Ashish Garg
Course: GATE
Mechanical Engineering (ME)
1.25
Correct Option
HOME
Solution :
MY TEST 1.25
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
QUESTION ANALYTICS
ASK AN EXPERT
OFFER
Q. 8
EXCLUSIVE OFFER FOR OTS
STUDENTS ONLY ON BOOK For a rectangular strain rosette value of principal strain is 1000 × 10–6 and 200 × 10–6. If value of μ = 0.30
PACKAGES and Young’s modulus E = 200 GPa. The value of maximum principal stress will be__________ MPa.
FAQ Have any Doubt ?
Solution :
232.97 (231 - 235)
QUESTION ANALYTICS
Q. 9
For the stepped round bar as shown in figure. The value of torsional shear stress at point C is Then
0
Correct Option
Solution :
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 4/10
2/16/2019 MADE EASY ONLINE TEST SERIES
0
Ashish Garg
(Enroll User) Sign out
QUESTION ANALYTICS
Ashish Garg
Course: GATE
Mechanical Engineering (ME)
Q. 10
HOME What is the change in diameter of thin cylindrical pressure vessel, diameter of pressure vessel is 150 mm
and maximum pressure inside the pressure vessel is 6 MPa, if thickness of pressure vessel is 12.5 mm and
longitudinal and circumferential efficiency of joints is 80% and 90% respectively.
MY TEST Given: E = 200 GPa, μ = 0.25
FAQ Have any Doubt ?
BOOKMARKS
A
MY PROFILE 0.03 mm
Correct Option
REPORTS
Solution :
BUY PACKAGE (a)
ASK AN EXPERT
OFFER
B
0.3 mm
C
0.003 mm
D
3 mm
QUESTION ANALYTICS
Q. 11
For a composite bar as shown below, what is the relation between axial deformation and thermal
deformations in the bar?
A
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 5/10
2/16/2019 MADE EASY ONLINE TEST SERIES
A
Ashish Garg
(Enroll User) Sign out
Ashish Garg
Course: GATE C
Mechanical Engineering (ME)
HOME
Correct Option
MY TEST
Solution :
(c)
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 12
For a prismatic bar fixed at both the ends. If temperature of bar is increased by T°C then whatwill be the
change in diameter of the bar?
Have any Doubt ?
A
αTd (1 + μ)
Correct Option
Solution :
(a)
B
αTd (1 – μ)
C
αTd
D
zero
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 6/10
2/16/2019 MADE EASY ONLINE TEST SERIES
QUESTION ANALYTICS
Ashish Garg
(Enroll User) Sign out
Q. 13
A load of 2.2 kN is applied on a specimen during hardness testing diameter of steel ball is 10 mm and radius
of identation is 0.65 mm. What will be the value of hardness?
FAQ Have any Doubt ?
A
Ashish Garg
1650 BHN
Course: GATE
Mechanical Engineering (ME)
B
HOME 168 BHN
Correct Option
MY TEST
Solution :
BOOKMARKS (b)
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
D
168 UHN
QUESTION ANALYTICS
Q. 14
A hypothetical engineering curve shows the variation of stress and strain for a component. If the volume of
the component is 4000 mm3, the toughness of component is _______ Joule.
Solution :
2.515 (2.50 - 2.53)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 7/10
2/16/2019 MADE EASY ONLINE TEST SERIES
Ashish Garg
(Enroll User) Sign out
Ashish Garg
Course: GATE
Mechanical Engineering (ME)
HOME
BOOKMARKS
Q. 15
MY PROFILE
The shaft of power transmission system with same weights, length and material with ratio of inner diameter
to outer diameter of hollow circular shaft as 0.4. The ratio of power transmission capacity of solid and
REPORTS
hollow circular shaft running at same rpm will be __________.
FAQ Have any Doubt ?
BUY PACKAGE
QUESTION ANALYTICS
Q. 16
Arrangement at strain rosettes is shown below in figure. If the strain tensor in 2D is given as,
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 8/10
2/16/2019 MADE EASY ONLINE TEST SERIES
Ashish Garg
The value of strain in strain gauge B is ___________ × 10–3.
(Enroll User) Sign out
FAQ Have any Doubt ?
19
Correct Option
Solution :
Ashish Garg 19
Course: GATE
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
QUESTION ANALYTICS
Q. 17
A load of 100 N falls through a height of 100 mm before coming to rest on a stop at the lower end of a bar
of 1 m length and 20 mm diameter. Modulus of elasticity of bar is 2 × 105 N/mm2. The energy stored in the
bar when the elongation in the bar is maximum ____________ J.
FAQ Have any Doubt ?
Solution :
10.0566 (10.04 - 10.07)
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 9/10
2/16/2019 MADE EASY ONLINE TEST SERIES
Ashish Garg
(Enroll User) Sign out
QUESTION ANALYTICS
Ashish Garg
Course: GATE
Mechanical Engineering (ME)
HOME
MY TEST
BOOKMARKS
MY PROFILE
REPORTS
BUY PACKAGE
ASK AN EXPERT
OFFER
https://onlinetestseriesmadeeasy.in/madeeasy/index.php?pageName=timeManagementReport&testid=1025&t=cont-1&testType=2 10/10