Professional Documents
Culture Documents
LCD MODULE
CUSTOMER
APPROVED BY
DATE
Approved For Specifications
Approved For Specifications & Sample
AMPIRE CO., LTD.
Building A., 4F., No.116, Sec. 1, Sintai 5th Rd., Xizhi Dist,
New Taipei City 221, Taiwan (R.O.C.)
新北市汐止區新台五路一段 116 號 4 樓(東方科學園區 A 棟)
TEL:886-2-26967269 , FAX:886-2-26967196 or 26967270
2. PHYSICAL SPECIFICATIONS
Item Specifications Remark
Surface treatment HC
Interface Digital
Backlight power
2.2Watt Note 2
consumption
Panel power
1.056Watt Note 3
consumption
Weight TBD
Note 1: Refer to Mechanical Drawing.
Note 2: Including LED Driver power consumption.
Note 3: Including T-con Board power consumption.
Note 1: The absolute maximum rating values of this product are not allowed to be exceeded at any times.
Should a module be used with any of the absolute maximum ratings exceeded, the characteristics
of the module may not be recovered, or in an extreme case, the module may be permanently
destroyed.
VALUES
ITEM SYMBOL UNIT REMARK
MIN TYP. MAX
ILED=200mA
20mA
……
LED 10
LED 1
LED 2
LED 3
LED 9
b. Power off:
VALUES
ITEM SYMBOL UNIT REMARK
MIN TYP. MAX
LVDS Differential
input high RxVTH -- -- +100 mV RXVCM=1.2V
Threshold voltage
LVDS Differential
input low RxVTL -100 -- -- mV
Threshold voltage
LVDS Differential
input common RxVCM 0.7 -- 1.6 V
mode voltage
LVDS Differential
|VID| 250 -- 600 mV
voltage
VALUES REMAR
ITEM SYMBOL UNIT
MIN TYP. MAX K
Frame
Clock Frequency 1/Tc 68.9 71.1 73.4 MHz rate
=60Hz
Horizontal display
tHD 1280 Tc
area
HS period time tH 1410 1440 1470 Tc
HS Width +Back
tHW+ tHBP+tHFP 60 160 190 Tc
Porch +Front Porch
Vertical display area tVD 800 tH
1 GND Ground
10 GND Ground
13 GND Ground
16 GND Ground
19 GND Ground
22 GND Ground
23 GND Ground
27 NC No connection
29 NC No connection
30 NC No connection
Frequency range:10~55Hz
Stroke:1.5mm
Vibration Sweep:10Hz~55Hz~10Hz
2 hours for each direction of X. Y. Z.
(6 hours for total)
Random Vibration :
0.015G*G/Hz from 5-200HZ, -6dB/Octave
Vibration (with carton) from 200-500HZ
2 hours for each direction of X. Y. Z.
(6 hours for total)
Height: 60cm
Drop (with carton)
1 corner, 3 edges, 6 surfaces
Note 1: Ta is the ambient temperature of samples.
Note 2: Ts is the temperature of panel’s surface.
Note 3: In the standard condition, there shall be no practical problem that may affect the display function.
After the reliability test, the product only guarantees operation, but don’t guarantee all of the
cosmetic specification.
Note 4: Before cosmetic and function test, the product must have enough recovery time, at least 2 hours at
room temperature.
8.7 Mechanism
Please mount LCD module by using mounting holes arranged in four corners
tightly.
8.10 Disposal
When disposing LCD module, obey the local environmental regulations.
8.11 Others
AMIPRE will provide one year warrantee for all products and three months
warrantee for all repairing products.
The residual image may exist if the same display pattern is shown for hours. This
residual image, however, disappears when another display pattern is shown or the
drive is interrupted and left for a while. But this is not a problem on reliability.