Professional Documents
Culture Documents
DOC. REF
WELDING PROCEDURE SPECIFICATiON
WPS NO: Rev:00
Applicable Codes: ASME SEC IX 2010 Summary: GTAW / 6G / A 312 / φ ≥ 25.4mm OD Page No.:
Welding Process(es):
Manual Automatic, Manual, or Semi Auto) JOINT DESIGN(QW-402): Joint Details
Single V Groove Single bevel Branch 37.5
1.6mm±0.8
2-4 mm
PQR 2" Dia-5.54mm THK
OR
Chemical Analysis,and Mechanical properties : NA
to Chemical Analysis,and Mechanical properties : NA
Thickness Range Qualified:
Base Metal: Groove- 1.5 to 11.08 mm Fillet - All
Base Metal Range:
Base metal Qualified: P.No.: 8 or Equivalent, ASTM A312 Gr.TP316L or Equivalent
Others: Pipe Dia. Range: Groove- All Fillet - All
FILLER METALS(QW-404):
Groove
Fillet
SIGN.
NAME
DESN.
DATE:
GTAW
Type:
0
± 2.5
0
. Socket Backing(Yes/No): NO
Backing Material:
Metal Nonfusing Metal Nonmetallic Other
Note: Applicable to all Groove
configurations BASE METAL(QW-403):
P.No. 8 Group No. 1,2,3,4 To P.No. 8 Group No. 1, 2, 3,4
OR
Specification,type, and grade : A 312 Gr.TP316L and Equivalent
to Specification type, and grade : A 312 Gr.TP316L and Equivalent
OR
Root + Others Spec. No.(SFA) SFA - 5.9
AWS No.(Class) ER 316L
F.No. 6
A.No. 8
Size of Filler Metals 2 / 2.4 mm dia
Weld Metal 5.54 mm + Reinforcement
Thickness Range
11.08 mm
All
Electrode Flux (Class) NA
Flux Trade Name NA
Consumable Insert NA
Brand ESAB - OK 16.30
PREPARED BY REVIEWED BY APPROVED BY
DOC. REF WELDING PROCEDURE SPECIFICATION
WPS NO: Rev:00
Applicable Codes: ASME SEC IX 2010 Summary: GTAW / 6G / A 312 / φ ≥ 25.4mm OD Page No.: POSITIONS(QW-405):
POST WELD HEAT TREATMENT(QW-407): Position of Groove - 6G & ALL Heating Rate - NA Welding Progression -
UPHIL Holding Temperature Range - NA Position of Fillet - All Holding Time Range - NA Others Cooling Rate - NA
Others -
PREHEAT(QW-406): GAS(QW-408):
Gas(es) %Comp. of Flow Rate
Preheat Temperature(Min.) -10
Percent composition
0
C Min Shielding ARGON 99.995 % 8 to 15 LPM Interpass Temperature(Max.) - 150
0
C Max Trailing NA NA NA Preheat Maintenance - Yes Backing ARGON 99.995
% 8 to 15 LPM
Gas : Single ELECTRICAL
CHARACTERISTICS(QW-409):
Current AC or DC: DC Polarity :
Tungeston Electrode Size and Type - 2.4 mm and 2% Thoriated Mode of Metal transfer for GMAW - NA Electrode/Wire feed
speed range - NA
TECHNIQUE(QW-410):
Straight for GTAW (Negative- DCEN)
Ampere Range:
75 - 120 Amps Voltage Range: 09 - 15 Volts
TECHNIQUE(QW-410): Stringe or Weave Bead - String / Weaving shall not exceed 2.5 times of electrode dia. Orifice or Gas
Cup Size - 5 -8 mm OD Initial and Interpass Cleaning(Brushing,Grinding,etc.) - Grinding & Brushing (Use Stainless steel special
tools) Method of Back Gouging - NA Oscillation - NA Contact Tube to Work Distance - NA Multiple or Single Pass(per side):
Multiple Multiple or Single Electrode - Single Travel Speed Range - 0.8 - 1.5 mm/sec Peening - NA Closed to out chamber : NA
Use of thermal Process : NIL Others -
Weld Layer
Process Weld
Filler Metal Class
Root+ Hot GTAW ER 316L 2 / 2.4 mm DCEN 75 - 100 0.8 - 1.5 mm/sec
Filler/ Capping
Diameter mm
Current
Voltage Range(V) Type & Polarity
Travel Range
Speed
REMARKS Ampere Range(A)
09 - 15
GTAW ER 316L 2 / 2.4 mm DCEN 95-120 09- 15
0.8 - 1.5 mm/sec
PREPARED BY REVIEWED BY APPROVED BY
SIGN.
NAME
DESN.
DATE: