Professional Documents
Culture Documents
PRODUCT INFORMATION
Packaging 25 kg bag
Appearance / Colour Powder / Dark grey
Shelf life 9 months from date of production if stored properly in original and un-
opened, sealed and undamaged packaging
Storage conditions Store in dry conditions at temperatures between +15 °C and +30 °C. Pro-
tect from direct sun light.
Density ~2.76 kg/L (wet density), based on 10 % water to solids ratio
TECHNICAL INFORMATION
Abrasion Resistance 0.077 mm/menit (ASTM C 944)
1/3
Compressive Strength Days Compressive Pourable 10 % (ASTM C 109)
1 day 300 kg/cm2
7 days 600 kg/ cm2
28 days 700 kg/cm2
Flexural Strength Days Flexure (ASTM C 348)
1 day 40 kg/cm2
7 days 90 kg/ cm2
28 days ~120 kg/cm2
APPLICATION INFORMATION
Consumption Consumption based on thickness of application
13 mm : ~36 kg/m2
25 mm : ~70 kg/m2
40 mm : ~111 kg/m2
Note : The above represents estimated requirements for dry material
based on 10 % water/solids ratio. Requirements will vary with substrate
levels. No allowance has been made for wastage.
2/3
LEGAL NOTES
The information, and, in particular, the recommenda-
tions relating to the application and end-use of Sika
products, are given in good faith based on Sika's cur-
rent knowledge and experience of the products when
properly stored, handled and applied under normal
conditions in accordance with Sika's recommenda-
tions. In practice, the differences in materials, sub-
strates and actual site conditions are such that no war-
ranty in respect of merchantability or of fitness for a
particular purpose, nor any liability arising out of any
legal relationship whatsoever, can be inferred either
from this information, or from any written recom-
mendations, or from any other advice offered. The
user of the product must test the product’s suitability
for the intended application and purpose. Sika re-
serves the right to change the properties of its
products. The proprietary rights of third parties must
be observed. All orders are accepted subject to our
current terms of sale and delivery. Users must always
refer to the most recent issue of the local Product Data
Sheet for the product concerned, copies of which will
be supplied on request.
3/3