Professional Documents
Culture Documents
Features:
Standard QL5/QL50 Bit shank without
● Ultra High Performance Design Blow Tube / Foot Valve
● Tubeless (utilizes Bit without Blow Tube / Foot Rockmore's ROK 500T DTH hammer
Valve), eliminating breakage of plastic parts utilizes a bit without a plastic blow tube /
foot valve. The corresponding QL5T bit
shank operates with no blow tube / foot
● Operates With Standard QL5/QL50 Shank valve. To operate the hammer with a
Design Without Blow Tube / Foot Valve standard QL5/QL50 bit shank, simply
remove the blow tube / foot valve.
● Patented Innovations
Applications:
● Mining / Blast Hole ● Environmental
● Water-Well ● Geothermal
QL5T tubeless shank integrated guide wear resistant adjustable choke reliable check
(standard QL5/QL50
shank without blow sleeve for increased wear sleeve system valve system
tube) safety
ROCKMORE International, Inc. 10065 S.W. Commerce Circle; Wilsonville, OR 97070, USA
Tel: +1-503-682-1001; Fax: +1-503-682-1002; info@rockmore-intl.com
ROCKMORE International GmbH Collini - Strasse 2; A-8750 Judenburg - Austria
Tel: +43 3572 86 300-0; Fax: +43 3572 84 179; austria@rockmore-intl.at
Rev. 3-28-16
www.rockmore-intl.com
Integrated SonicFlow
Technology ROK 500T-001
Parts List
Item Part Number Description
DTH Hammer, 500T, QL5T, 3-1/2" API Reg Pin, Tubeless
ROK 500T-001 (Bit without Blow Tube / Foot Valve)
1 500TS-001 Top Sub, 3-1/2" API Reg Pin
2 R2-342 O-Ring, 3.600" X 0.210"
3 CV-001 Check Valve
4 SP-001 Spring
5 SR-002 Spring Rest
6 CH-001 Choke, quantity of 2
7 PN-003 Pin, 0.625" Dia, 3.5" L
8 R2-135 O-Ring, 1.925" X 0.103"
9 AG-007 Air Guide
10 500TWS-001 Wear Sleeve
11 PT-011 Piston
12 R2-234 O-Ring, 2.984" X 0.139"
13 BR-019 Bit Retainer Ring
14 500DS-005 Driver Sub
A DTH Bit QL5T Tubeless Shank (Standard QL5/QL50 without blow tube)
Operating Parameters
Air Pressure Air Consumption
10.4 Bar [150 PSI] 7.3 m3/min [259 SCFM]
17.2 Bar [250 PSI] 16.6 m3/min [587 SCFM]
24.1 Bar [350 PSI] 25.2 m3/min [890 SCFM]
Oil consumption at 24.1 Bar (350 PSI): 0.5 l/hr [0.13 gallon/hr]
Recommended rotation speed: 20 r/min to 70 r/min
Minimum diameter difference between wear sleeve and bit: 10 mm [0.39"]
Technical Specifications
Standard Top Sub 3-1/2" API Reg Pin
QL5T Tubeless Shank
Bit shank type
(QL5/QL50 without Blow Tube / Foot Valve)
Recommended bit diameter, mm [in] 140 to 152 [5.5 to 6.0]
Outside diameter, mm [in] 125 [4.9]
Wear sleeve discard diameter, mm [in] 109 [4.3]
Wrench flat size on Top Sub, mm [in] 93 [3.66]
Length without drill bit, mm [in] 1055 [41.5]
Patented Weight without drill bit, kg [lbs] 67.0 [147.7]
ROCKMORE ROCKMORE
International, Inc. International GmbH
10065 S.W. Commerce Circle Collini - Strasse 2
Wilsonville, OR 97070, USA A-8750 Judenburg - Austria
Tel: +1-503-682-1001 Tel: +43 3572 86 300-0
Fax: +1-503-682-1002 Fax: +43 3572 84 179
info@rockmore-intl.com austria@rockmore-intl.at
Rev. 3-28-16
www.rockmore-intl.com