Professional Documents
Culture Documents
Acesspoint
[Requirements]
1. DWC-1000/2000 mit aktueller Firmware
- DWC-1000 with FW4.4.1.2 and higher
- DWC-2000 with FW4.4.1.2 and higher
[Scenario]
[Preparation]
b. If you click on one of the managed APs with "right-click", you will be
fered further information on this selected access point
2.) Switch to the menu now „Maintenance -> AP Firmware -> AP Firmware
Download“.
c. with "Image Download Type" you can change the selection to e.g. limit only "DWL-3600 /
6600AP"
d. With "Managed AP" you can choose whether you want to update all APs or only individual APs
e. confirm the entry with "Start" and wait until the update has been completed
If you leave "ALL", you must specify a corresponding firmware file name for all AP types.
2.) After confirming your settings with "Start" the DWC-1000/2000 will show you the
message "Operation Succeeded", please change to the tab "AP Firmware Status“
The update takes about 12-15 minutes per AP.
Success messages and possible error messages are displayed after the process.
If your DWC-1000/2000 as well as the access points and TFTP servers are located in
different IP subnets, you must ensure that the access points can reach the TFTP server
via routing for the firmware update.