Professional Documents
Culture Documents
The Series 5000L and 5000LT couplings The Series 5000L and 5000LT
have been designed to connect tubes couplings provide a quick connection
for water, air or oil, used within plastic and disconnection method for the
injection and die casting moulds. replacement of heating and conditioning
GENERAL DATA
Valve group quick-release valve
Construction poppet
Mounting by means of threading
Threadings GAS cylindrical ISO 228 (BSP)
Threads G1/8 - G1/4 - G3/8
Materials Internal/external parts in brass
Springs and balls in stainless steel
Seals in FKM
Operating temperature -15°C ÷ 140°C (200°C with oil)
Operating pressure - 0,99 ÷ 12 bar
Nominal pressure 6 bar
Nominal flow see flow diagrams on the following page
Nominal diameter ø5 - ø7
Media water, air and oil
The female couplings are realized to prevent any fluid leakage Q (l/min)= Flow
during connection and disconnection. Δp = load loss
CONNECTION
For applications requiring a higher flow rate, the female coupling Q (l/min)= Flow
version with through hole is available. Δp = load loss
This solution allows a higher fluid flow but doesn’t prevent fluid
leakage during disconnection. The diagram helps users choose the most suitable model in
relation to the operating pressure and the required flow rate.
The measurements were taken using the models indicated and
represent the ideal max flow rate conditions. In case tubes of
inferior quality are used, this might result in poorer performance.
Male connector
4
CONNECTION