Professional Documents
Culture Documents
SUS 409
Paint Name
Purpose : For Approve the quality of SUNHEAT 2SH650-NH-106 of paint film performance
: Sand blast date 6 August 2018 (Steel Grit Sinto G40H (70)
Pre treat ment
: SUNCOAT (THAILAND) CO.,LTD.
2st test : Physical Preformace after heating at 150oC 250oC , 350oC, 450oC, 550oC
Conclusion : From results of this times test, we judged that 2 -coating type paint of
standard enough.
Test result :1
Result
Item Condition The standards of quality
SUS409
A transparency, a stripe, a bubble ,a crack
,a sulk and a tear cannot be seen. The luster
Appearance 4-1 and color have to similar to the ordinary ones. No abnormallity
The luster and color have to similar to the
ordinary ones.
Thickness of layer 4-2 Primer:20~30μm。 Top coat:20~30μm Primer:20μm Top coat:30μm
Mirror side luster degree 4-3 Have to be equal to approved one. Gloss 0.5
Adhesion 4-4 100/100 100/100
No fusion things, sulk and tear should not
Corrosion resistance 4-5 be seen along X-cut. (one side:2mm, Each side 0 mm.
both sides:4mm)
Hardness 4-6 Can endure the hardness of HB 3H
Impact resistance 4-7 Crack and sulk cannot be seen No abnormallity
Bending Resistance 4-8 Crack and sulk cannot be seen No abnormallity
The adhesion and the trace of texture should
The non-adhesive 4-9 No abnormallity
not be seen remarkable
The sulk and the tear cannot be seen. The
cloudiness, change of luster and color,
Oil resistance 4-10 No abnormallity
softening of coating shoulud not be
seen remarkable.
The occurrence of a wound, a decrease of
Xylene resistance 4-11 luster, an adhesion of color to the gauge No remarkable change in color
should not be seen remarkable.
The occurrence of a wound, a decrease of
Volatile oil resistance 4-12 luster, an adhesion of color to the gauge No remarkable change in color
should not be seen remarkable.
The occurrence of a wrinkle, a sulk or a tear
cannot be seen.Remarkable change of an
Humedity resistance 4-13 No abnormallity
luster, a color and the hardness of coating
cannot be seen.
The occurrence of a wrinkle, a sulk or a tear
cannot be seen.Remarkable change of an
Water resistance 4-14 No abnormallity
luster, a color and the hardness of coating
cannot be seen.
The occurrence of a white wall and rust
cannot be seen remarkable.The desuoloration,
Appearance No abnormallity
Weather resistance a crack,a sulk a lear or an wrinkle cannot be
(Accelerated 4-15.1 seen.
weahering (hours) Adhesion 100/100 100/100
Gross residual
No remarkable change of the gross No remarkable change in color
rate
The occurrence of a white wall and rust
cannot be seen remarkable.The desuoloration,
Appearance No abnormallity
Weather resistance a crack,a sulk a lear or an wrinkle cannot be
(Outdoor exposure) 4-15.2 seen.
(in japan) Adhesion 100/100 100/100
Gross residual
No remarkable change of the gross No remarkable change in color
rate
Test result :2
Result
Subject Condition Method
SUS409
Chenge of color Occurred by alkali 4-16-2 A clear scar should not be seen. No abnormallity
Crrosion resistance be seen along X-cut. (one side:2mm, Each side 0 mm.
4-17
both sides:4mm)
Impact rsistance Both crack and tear should not be seen. No abnormallity
Volatile resistance luster, an adhesion of color to a gauge should No remarkable change in color
Heat resistance Crrosion resistance be seen along X-cut. (one side:2mm, Each side 0 mm.
4-17
both sides:4mm)
Impact rsistance Both crack and tear should not be seen. No abnormallity
Volatile resistance luster, an adhesion of color to a gauge should No remarkable change in color
Crrosion resistance be seen along X-cut. (one side:2mm, Each side 0 mm.
4-17
both sides:4mm)
Impact rsistance Both crack and tear should not be seen. No abnormallity
Volatile resistance luster, an adhesion of color to a gauge should No remarkable change in color
Crrosion resistance be seen along X-cut. (one side:2mm, Each side 0 mm.
4-17
both sides:4mm)
Impact rsistance Both crack and tear should not be seen. No abnormallity
Volatile resistance luster, an adhesion of color to a gauge should No remarkable change in color
Mirror side
3 4-2-3 Same as standard Normal
luster degree
Corrosion
5 Resisrance 4-2-5 One side 0mm
(240hours)
Total Thickness:56 μm
Total Thickness:52 μm
Total Thickness:56 μm
SUNHEAT 2SH650-NH106
Film Performance Specification
SUS 409
Item Condition result
Volatile Oil
12 4-2-12 Normal Normal
resistance
Normal
<Weather
Resistance>
15 Appearance 4-2-15 Normal
Adhision 4-2-15 100/100
Gross residual rate 4-2-15 Normal
<Weather
Normal
Resistance>
Appearance
15 Adhision 4-2-15 Normal
Gross residual rate 4-2-15 100/100
( Outdoor exposure 4-2-15 Normal
(in japan)
<Spot resistant
properties>
16 Normal
Acid resistance 4-2-16-1 Normal
<Spot resistant
properties>
16 Normal
Normal
4-2-16-2
Alkal resistance
<Spot resistant
properties>
16 Normal
4-2-16-3 Normal
gasoline resistance
<Heat Resistance>
150℃×200hrs
17
Appearance 4-2-17 Normal
Adhension 4-2-17 100/100
<Heat
Resistance>
150℃×200hrs
17 Corrosion
Resistance 4-2-17 One side 0mm
(240 hrs)
<Heat
Resistance>
150℃×200hrs
17 Normal Normal
4-2-17
Impact resistance
Properties
<Heat
Ressitance>
150℃×200hrs
17 Normal Normal
Volatile Oil 4-2-17
resistance
<Heat
Resistance>
150℃×200hrs
17
No significant
4-2-17
Abrasion resistance discoloration
<Heat Resistance>
250℃×200hrs
17
Appearance 4-2-17 Normal
Adhension 4-2-17 100/100
<Heat
Resistance>
250℃×200hrs
17 Corrosion
Resistance 4-2-17 One side 0mm
(240 hrs)
<Heat
Resistance>
250℃×200hrs
17 Normal Normal
4-2-17
Impact resistance
Properties
<Heat
Ressitance>
250℃×200hrs
17 Normal Normal
Volatile Oil 4-2-17
resistance
<Heat
Resistance>
250℃×200hrs
17
No significant
4-2-17
Abrasion resistance discoloration
<Heat Resistance>
350℃×200hrs
17
Appearance 4-2-17 Normal
Adhension 4-2-17 100/100
<Heat
Resistance>
350℃×200hrs
17 Corrosion
Resistance 4-2-17 One side 0mm
(240 hrs)
<Heat
Resistance>
350℃×200hrs
17 Normal Normal
4-2-17
Impact resistance
Properties
<Heat
Ressitance>
350℃×200hrs
17 Normal Normal
Volatile Oil 4-2-17
resistance
<Heat
Resistance>
350℃×200hrs
17
No significant
4-2-17
Abrasion resistance discoloration
<Heat Resistance>
450℃×200hrs
17
Appearance 4-2-17 Normal
Adhension 4-2-17 100/100
<Heat
Resistance>
450℃×200hrs
17 Corrosion
Resistance 4-2-17 One side 0mm
(240 hrs)
<Heat
Resistance>
450℃×200hrs
17 Normal Normal
4-2-17
Impact resistance
Properties
<Heat
Ressitance>
450℃×200hrs
17 Normal Normal
Volatile Oil 4-2-17
resistance
<Heat
Resistance>
450℃×200hrs
17
No significant
4-2-17
Abrasion resistance discoloration
<Heat Resistance>
550×200hrs
17
Appearance 4-2-17 Normal
Adhension 4-2-17 100/100
<Heat
Resistance>
550×200hrs
17 Corrosion
Resistance 4-2-17 One side 0mm
(240 hrs)
<Heat
Resistance>
550×200hrs
17 Normal Normal
4-2-17
Impact resistance
Properties
<Heat
Ressitance>
550×200hrs
17 Normal Normal
Volatile Oil 4-2-17
resistance
<Heat
Resistance>
550×200hrs
17
No significant
4-2-17
Abrasion resistance discoloration
<Heat Resistance>
650×200hrs
17
Appearance 4-2-17 Normal
Adhension 4-2-17 100/100
<Heat
Resistance>
650×200hrs
17 Corrosion
Resistance 4-2-17 One side 0mm
(240 hrs)
<Heat
Resistance>
650×200hrs
17 Normal Normal
4-2-17
Impact resistance
Properties
<Heat
Ressitance>
650×200hrs
17 Normal Normal
Volatile Oil 4-2-17
resistance
<Heat
Resistance>
650×200hrs
17
No significant
4-2-17
Abrasion resistance discoloration
<Rapid water
cooled test>
150℃×3hrs
number of
18 prescribed cycle: 3
times
4-2-18 Normal
4-2-18 100/100
Appearance
Adhension
<Rapid water
cooled test>
250℃×3hrs
number of
18 prescribed cycle: 3
times
4-2-18 Normal
4-2-18 100/100
Appearance
Adhension
<Rapid water
cooled test>
350℃×3hrs
number of
18 prescribed cycle: 3
times
4-2-18 Normal
4-2-18 100/100
Appearance
Adhension
<Rapid water
cooled test>
450℃×3hrs
number of
18 prescribed cycle: 3
times
4-2-18 Normal
4-2-18 100/100
Appearance
Adhension
<Rapid water
cooled test>
550℃×3hrs
number of
18 prescribed cycle: 3
times
4-2-18 Normal
4-2-18 100/100
Appearance
Adhension
<Rapid water
cooled test>
650℃×3hrs
number of
18 prescribed cycle: 3
times
4-2-18 Normal
4-2-18 100/100
Appearance
Adhension
Abrasion-resistance No significant
19 4-2-19
for water discoloration