You are on page 1of 12

D B.S.

Yeddyurappa (Karnataka)

If you have a grievance, submit repres

Q.No: 7 According to H.P. Government notification of 26-01-1981 which one of the following is included in the category of scheduled castes ?
A Hesi
B Sansi

C Chang
D Pinja

If you have a grievance, submit repres

Q.No: 8 Which was the largest princely state among the Shimla Hill States ?
A Keonthal

B Jubbal
C Bushahr
D Kehlur

If you have a grievance, submit repres

Q.No: 9 What name was given to the pink polling booths managed exclusively by women during the 2018 Karnataka Assembly elections ?
A Sabla
B Sakhi
C Saheli
D Sukanya

If you have a grievance, submit repres

Q.No: 10 When did Swami Vivekananda address the World Parliament of religions in Chicago (USA) ?
A October 12, 1894
B November 13, 1895
C September 11, 1893

D December 14, 1896

If you have a grievance, submit repres

Q.No: 11 In which country is Mecca where the muslims go for Haj ?


A Saudi Arabia

B UAE
C Oman
D Sudan

If you have a grievance, submit repres

Q.No: 12 When was Chail Military School shifted to its present site ?
A 1942
B 1925
C 1952
D 1960

If you have a grievance, submit repres

Q.No: 13 What name was given to the hurricane that hit Florida (US) around September 1917 ?
A Katia
B Jose
C Irma
D Harvey

If you have a grievance, submit repres

Q.No: 14 Who prepared the settlement Report of the Kangra District around 1889 AD ?
A G.C. Barnes
B J.M. Mashall

C William Moorcraft
D Francois Bernier

If you have a grievance, submit repres


Q.No: 15 With which region of H.P. is Kayang dance associated ?
A Sirmour
B Kinnaur

C Chamba
D Nalagarh

If you have a grievance, submit repres

Q.No: 16 When did India conduct its second nuclear Test (Pokhran-II)
A 1998

B 1974
C 1995
D 2002

If you have a grievance, submit repres

Q.No: 17 What is unique about Okinoshima island of Japan ?


A Males above the age of 80 years are not allowed to go there.
B Unmarried males are not allowed to go there.
C there is no Shinto priest in the temple.
D Entry of women is banned.

If you have a grievance, submit repres

Q.No: 18 Among the following which mountain range is highest from mean sea level ?
A Pir Panjal
B Zanskar

C Dhauladhar
D Shivalik

If you have a grievance, submit repres

Q.No: 19 What is the total are of H.P. ?


A 33566 Sq. Kms.
B 44707 Sq. Kms.
C 55673 Sq. Kms.

D 66472 Sq. Kms.

If you have a grievance, submit repres

Q.No: 20 Which one of the following is a famous painting of Nicholas Roerich ?


A Gaddi Belle

B Drops of Life
C Flower Maker
D Kangra Bride

If you have a grievance, submit repres

Q.No: 21 In a cross drainage work, when canal is below the drain, such cross drainage work is called …..
A Super passage
B Syphon Aqueduct
C Level crossing
D Aqueduct

If you have a grievance, submit repres

Q.No: 22 What is the value of smallest reading that can be noted during process of leveling?
A 5 mm

B 10 mm
C 15 mm
D 20 mm

If you have a grievance, submit repres


Q.No: 23 The following relationship between Bulk modulus (K) and elastic modulus (E) is correct:
A K = E/ [3 (1-2 ν)]

B K = 2 E( 1 + ν)
C K = 3 E( 1-2 ν)
D K = 3 E/ ( 1 - 2 ν)

If you have a grievance, submit repres

Q.No: 24 A Helper Gradient of ………. with additional one engine is generally used.
A 1 in 125 to 1 in 150
B 1 in 75 to 1 in 100

C 1 in 100 to 1 in 125
D 1 in 150 to 1 in 175

If you have a grievance, submit repres

Q.No: 25 Maximum hourly demand of water may be …..times of average hourly consumption of the maximum daily demand.
A 1.2
B 1.3
C 1.4
D 1.5

If you have a grievance, submit repres

Q.No: 26 Following is not an element of well :


A Curve

B Well Cap
C Steining
D Cutting edge

If you have a grievance, submit repres

Q.No: 27 The surface width of cracks should not exceed (in general) ….. in members where cracking is not harmful and does not have any serious a
upon preservation of reinforcing steel nor upon durability of structures.
A 0.05 mm
B 0.2 mm
C 0.1 mm
D 0.3 mm

If you have a grievance, submit repres

Q.No: 28 Rotary pumps can be used for pressure upto …….

A 45 kg/cm2.

B 70 kg/cm2.

C 60 kg/cm2.
D 35 kg/cm2.

If you have a grievance, submit repres

Q.No: 29 Generally …… standby capacity against average demand is considered sufficient.


A 60%
B 100%
C 80%

D 70%

If you have a grievance, submit repres

Q.No: 30 Minimum diameter of siphon pipe in sewers should not be less than ……
A 20 cm.
B 25 cm.
C 15 cm.

D 30 cm.

If you have a grievance, submit repres

Q.No: 31 Pipes of more than 30 cm diameter for water supply are designed for …… years period.
A 20 - 25

B 15 - 20
C 10 - 15
D 5 - 10

If you have a grievance, submit repres

Q.No: 32 Slump of concrete to be used in in-situ piling should be …….


A 25 to 50 mm.
B 0 to 25 mm.
C 50 to 100 mm.

D 100 to 150 mm.

If you have a grievance, submit repres

Q.No: 33 Jaundice is caused by …..


A bacterial infections.
B viral infections.

C protozoal infections.
D any one of the above.

If you have a grievance, submit repres

Q.No: 34 As per IS, Cast Iron (spun) pipes of Class B are designed for working pressure of ….
A 18 kg/cm2.

B 15 kg/cm2.

C 20 kg/cm2.

D 12 kg/cm2.

If you have a grievance, submit repres

Q.No: 35 When float of an activity is zero such activity is called ….


A Critical Activity.

B Super Critical Activity.


C Sub Critical Activity.
D none of the above.

If you have a grievance, submit repres

Q.No: 36 A tube well may fail due to ……


A Incrustation
B Corrosion
C Both of the above.

D None of the above.

If you have a grievance, submit repres

Q.No: 37 A freeboard of ……. should be adopted in the storm water drain constructed to carry a discharge of 5 – 10 cumecs.
A 0.3 m
B 0.5 m

C 0.6 m
D 0.4 m

If you have a grievance, submit repres

Q.No: 38 If yield strength (fy) of the material at 00C is 250 MPa , what will be its yield strength at 2000C?

A 210 MPa
B 190 MPa

C 230 MPa
D 250 MPa

If you have a grievance, submit repres

Q.No: 39 As per IS: 1904, allowable maximum settlement of rafts on clay is ….


A 40 mm.
B 65 mm.
C 40 to 65 mm.

D 65 to 100 mm.

If you have a grievance, submit repres

Q.No: 40 The number of sleepers per rail varies in India from …. for main track, where N is length of the rail in meters.
A N+7

B N+4
C N+3 to N+6
D N+9 to N+11

If you have a grievance, submit repres

Q.No: 41 On curved tracks, minimum ballast cushion is maintained at ……….


A inner rails.
B inner edge of sleeper.
C centre line of track.
D outer rail.

If you have a grievance, submit repres

Q.No: 42 Planimeter is used to …..


A enlarge maps.
B reduce maps.
C measure area of maps.

D none of the above.

If you have a grievance, submit repres

Q.No: 43 Transverse friction in curve design of highways is considered as …..


A 0.15

B 0.20
C 0.30
D 0.35 to 0.40

If you have a grievance, submit repres

Q.No: 44 Coefficient of permeability (cm/sec) of silty sand is ……


A 0.05 – 0.001
B 0.01 – 0.005

C 0.002 – 0.0001
D 1.0 to 0.01

If you have a grievance, submit repres

Q.No: 45 According to ……….., “Geometrically similar specimens of the same material deform similarly if they are so proportioned that L/(A)0.5 is co
and A are length and cross-section area of the specimens.
A Unwin’s Law
B Euler’s Law
C Barba’s Law

D none of the above.

If you have a grievance, submit repres

Q.No: 46 If there is an error of 2 % in water head measurement of a V notch, the error in discharge will be of ….
A 5%

B 1%
C 2%
D 3%

If you have a grievance, submit repres

Q.No: 47 Temporary adjustment (s) in a theodolite ……


A is leveling
B is focusing
C are centering, leveling and focusing.

D is centering

If you have a grievance, submit repres

Q.No: 48 …… is a curve made up of two arcs having equal or different radii bending in opposite direction with a common tangent at their junction.
A Simple curve
B Deviation curve
C Serpentine curve

D Compound curve

If you have a grievance, submit repres

Q.No: 49 Settling velocity of 0.05mm diameter size particle varies with the ……
A square of the diameter.

B diameter of the particle.


C cubic of the diameter.

D (diameter)4.

If you have a grievance, submit repres

Q.No: 50 In a uniform cross-section bar, elongation due to self weight is …


A
B

D none of the above.

If you have a grievance, submit repres

Q.No: 51 Manometers are used to measure …….


A gauge pressure.

B vacuum pressure.
C pressure difference.
D any of the above.

If you have a grievance, submit repres

Q.No: 52 The minimum thickness of walls should be ……


A 100 mm

B 90 mm
C 75 mm.
D 80 mm

If you have a grievance, submit repres

Q.No: 53 The …… signs are in the shape of equilateral triangle with its apex pointing upwards.
A Regulatory signs
B Warning signs

C Informatory signs
D any of the above.

If you have a grievance, submit repres

Q.No: 54 In a steady flow, ……….. at a given point in space in a flowing mass of fluid do not change with the passage of time.
A velocity
B density
C pressure
D all of the above

If you have a grievance, submit repres

Q.No: 55 In Trunk mains above 1.25m in diameter, the ratio of hourly maximum flow to hourly average flow is ……
A 2.0
B 4.0
C 3.0
D 1.5
If you have a grievance, submit repres

Q.No: 56 Maximum normal stress induces on a ……


A major principal plane.

B minor principal plane.


C plane making 450 angle with major principal plane.
D plane making 600 angle with major principal plane.

If you have a grievance, submit repres

Q.No: 57 Degree of a curve is the angle subtended at the centre of curve by ……..
A the circular curve.
B a chord of 20 m length.

C a chord of 30 m length.
D none of the above.

If you have a grievance, submit repres

Q.No: 58 Municipal sewer is ….. water.


A 95%
B 99.9%

C 98%
D 96%

If you have a grievance, submit repres

Q.No: 59 The effective slenderness ratio of a battened column should be taken as …… the maximum actual slenderness ratio of the column, to acco
deformation effects.
A 1.20 times
B 1.25 times
C 1.10 times

D 1.15 times

If you have a grievance, submit repres

Q.No: 60 The minimum spacing between centre of fasteners should not be less than ……… of the fastener.
A 2.5 times the nominal diameter

B 2.5 times the hole diameter


C 3.0 times the nominal diameter
D 3.0 times the hole diameter

If you have a grievance, submit repres

Q.No: 61 As per Indian Standards, total concentration of solids in sewage effluent for sewage farming should not exceed …
A 1800 ppm.
B 1600 ppm.

C 2100 ppm.
D 1200 ppm.

If you have a grievance, submit repres

Q.No: 62 Removal of water from voids of soil is called ….


A compaction.
B mechanical compaction.
C consolidation.

D none of the above.

If you have a grievance, submit repres

Q.No: 63 In combined system, during non-monsoon periods, about ….. of the designed discharge will be passing through sewers.
A 1/16
B 1/10

C 1/13
D 1/20

If you have a grievance, submit repres


Q.No: 64 A minimum water pressure of ……… should be maintained even after 4 to 5 hours of constant use of fire hydrant.
A 1.0 to 1.5 kg/cm2
B 1.75 to 2.0 kg/cm2
C 2.0 to 2.25 kg/cm2
D 1.5 to 1.75 kg/cm2

If you have a grievance, submit repres

Q.No: 65 In fatigue loading, the maximum stress range should not exceed ….. for normal stress. Where, fy is the yield strength of the material.

A fy/ (3)0.5

B 1.5 fy/ (3)0.5

C 1.5 fy

D fy

If you have a grievance, submit repres

Q.No: 66 When pressure forces alone are predominant, a model may be taken to be dynamically similar to the prototype when the ratio of inertial f
force is the same for model and prototype. Alternatively one can equate ….of the model and prototype.
A Reynolds number
B Mach number
C Euler number

D Froude number

If you have a grievance, submit repres

Q.No: 67 Bending strength of a section is represented by the …….


A section modulus of the section.

B cross-sectional area.
C polar moment of inertia of the section.
D moment of inertia of the section.

If you have a grievance, submit repres

Q.No: 68 The capacity of an open well in cumecs per m2 of area under a unit depression head is called ……..

A Specific discharge.

B Specific yield.
C Transmissibility.
D Discharge.

If you have a grievance, submit repres

Q.No: 69 When available water head is 60m to 150 m, suitable type of turbine is ….
A Pelton wheel.
B Francis.

C Kaplan.
D any of the above.

If you have a grievance, submit repres

Q.No: 70 Minimum size of fillet weld is ……., when thickness of thicker part is 30 mm
A 3 mm

B 5 mm
C 6 mm
D any of the above

If you have a grievance, submit repres

Q.No: 71 In conjugate beam, hinged end of the real beam is replaced with ……
A free end in conjugate beam.
B roller end in conjugate beam.

C hinged end in conjugate beam.


D fixed end in conjugate beam.

If you have a grievance, submit repres


Q.No: 72 If a column is exposed to fire from three sides, the limiting temperature should be ……
A average of thermocouples temperature measured on two opposite surfaces exposed to the fire.
B Average of temperatures measured at the thermocouple locations on the farthest surface from the wall.
C average of thermocouples temperature measured on three surfaces exposed to the fire.

D Any of the above.

If you have a grievance, submit repres

Q.No: 73 In Standard Penetration test, number of blows are recorded for …….
A 45 cm penetration.
B 30 cm penetration.

C 35 cm penetration.
D 40 cm penetration.

If you have a grievance, submit repres

Q.No: 74 Battens should be designed to carry the bending moments and shear forces arising from transverse shear force equal to …. of the total ax
whole compression member.
A 1.5 %
B 2.0 %
C 2.5 %

D 1.0 %

If you have a grievance, submit repres

Q.No: 75 In a stream, generally maximum velocity is situated between surface and …………..
A 0.45 of the depth.
B 0.35 of the depth.
C 0.4 of the depth.
D 0.3 of the depth.

If you have a grievance, submit repres

Q.No: 76 Blue baby disease is caused in children by the presence of excess ….. in water.
A sulphates
B chlorides
C nitrates

D phosphates

If you have a grievance, submit repres

Q.No: 77 Broad Gauge railway carries equal to or more than …..


A 1.5 gross million tonnes per annum
B 10 gross million tonnes per annum
C 2.5 gross million tonnes per annum
D 5 gross million tonnes per annum

If you have a grievance, submit repres

Q.No: 78 In India, generally sewage produced is …. of the accounted water supplied from the water works.
A 70%
B 65%
C 75%

D 60%

If you have a grievance, submit repres

Q.No: 79 Minimum self cleaning velocity in the sewer should be developed at least once in ………
A a day.

B 7 days.
C 2 days.
D 3 days.

If you have a grievance, submit repres


Q.No: 80 …. mode needs minimum energy to haul unit load through unit distance.
A Waterways
B Roadways
C Railways

D Airways

If you have a grievance, submit repres

Q.No: 81 ……… type of recording rain gauge is most widely used in India at almost all its meteorological stations.
A Symon’s
B Floating

C Tipping bucket
D any one of above

If you have a grievance, submit repres

Q.No: 82 The quantity of ballast required per meter length is …. for B.G. track.
A 0.053 m3

B 0.036 m3
C 1.036 m3

D 0.071 m3

If you have a grievance, submit repres

Q.No: 83 Grade beam in loose soils is placed in such a way that its ….
A top face should be at ground level.

B bottom face should be at ground level.


C bottom face should be at least 80 mm above ground level.
D No such specification is required.

If you have a grievance, submit repres

Q.No: 84 To check suitability of water for curing and mixing, average 28 days compressive strength of at least three 150 mm concrete cubes prepa
proposed to be used should not be less than ……of the average compressive strength of three similar cubes prepared with distilled water.
A 80%
B 60%
C 90%

D 70%

If you have a grievance, submit repres

Q.No: 85 Under transient wind load the lateral sway at the top of building should not exceed ……., where H is the total height of the building.
A H/ 500

B H/ 1000
C H/1500
D H/750

If you have a grievance, submit repres

Q.No: 86 When depth of flow in circular sections goes less than half full, ….
A velocity of flow reduces considerably.
B discharge of flow reduces considerably.
C poorer the performance.
D all of the above.

If you have a grievance, submit repres

Q.No: 87 Latest specifications of 43 grade cement may be referred from ………


A IS: 8112.
B IS: 15269.
C IS: 1489.
D IS: 269.

If you have a grievance, submit repres

Q.No: 88 For flexible pavement design, Curve B is for ……..


A 45 – 150 vehicles per day.

B 15 – 45 vehicles per day.


C 150 – 450 vehicles per day.
D 0 – 15 vehicles per day.

If you have a grievance, submit repres

Q.No: 89 Gneiss is a type of ……….


A Igneous rock.
B Sedimentary rock.

C Metamorphic rock.
D none of the above.

If you have a grievance, submit repres

Q.No: 90 An imaginary line joining centre of eye piece and optical centre of object glass is called ….
A Line of collimation.

B Axis of bubble tube.


C Axis of Telescope.
D none of the above.

If you have a grievance, submit repres

Q.No: 91 Minimum horizontal spacing between piles under normal loading should be ………
A 1.0 times the bulb diameter.
B 1.5 times the bulb diameter.
C 2.0 times the bulb diameter.

D None of the above.

If you have a grievance, submit repres

Q.No: 92 Pressure intensity inside a hollow bubble (like a soap bubble) is ….


A 2 x surface tension/ radius of the bubble.

B 4 x surface tension/ radius of the bubble.


C 6 x surface tension/ radius of the bubble.
D none of the above.

If you have a grievance, submit repres

Q.No: 93 At a duration smaller than the optimal duration of the project, total cost of the project is ……… than the minimum cost of the project due t
A Smaller, higher indirect cost.
B larger, higher indirect cost.

C smaller, higher direct cost.


D larger, higher direct cost.

If you have a grievance, submit repres

Q.No: 94 Uniformity coefficient for filtering media in rapid gravity filter should not be less than ….
A 1.05

B 1.20
C 1.10
D 1.15

If you have a grievance, submit repres

Q.No: 95 Theoretical maximum capacity of a single lane is determined by ……, where V is speed (kmph) and S is average centre to centre spacing o
A C = 1200 V/ S
B C = 1500 V/ S
C C = 1000 V/ S

D C = 1800 V/ S

If you have a grievance, submit repres

Q.No: 96 The sludge from an activated sludge treatment plant contains about … of water.
A 99%

B 97%
C 95%
D 96%

If you have a grievance, submit repres

Q.No: 97 For successful grouting of soils, groutability ratio [i.e. (D15) soil/ (D85) grout]

A > 15
B > 10
C > 25

D > 20

If you have a grievance, submit repres

Q.No: 98 Permissible linear error in theodolite surveying used for survey work of cities and important boundaries is …..
A 1 in 5000.
B 1 in 3000.
C 1 in 4000.

D 1 in 2000.

If you have a grievance, submit repres

Q.No: 99 All columns should be designed for minimum eccentricity, equal to …..
A the unsupported length of column/ 500
B the unsupported length of column/ 500 + lateral dimension/30
C the unsupported length of column/ 500 + lateral dimension/30, subject to a minimum of 20 mm.

D none of the above.

If you have a grievance, submit repres

Q.No: 100 Tension field method is used in ….. of a plate girder.


A buckled bending design
B unbuckled bending design

C buckled shear design


D unbuckled shear design

If you have a grievance, submit repres

Click here to go to Main Menu

© All rights reserved

You might also like