Professional Documents
Culture Documents
BDP-S1100
WARNING
To reduce the risk of fire or electric shock, do not
expose this appliance to dripping or splashing,
and do not place objects filled with liquids, such
as vases, on the appliance.
To avoid electrical shock, do not open the cabinet. Disposal of waste batteries
Refer servicing to qualified personnel only. The above symbol is applicable in the European
Union and other European countries with
The AC power cord (mains lead) must be changed separate collection systems.
only at a qualified service shop.
Precautions
Do not expose batteries or appliances with • This unit operates on 110 V - 240 V AC,
battery-installed to excessive heat, such as 50/60 Hz. Check that the unit’s operating
sunshine and fire. voltage is identical with your local power
supply.
CAUTION • Install this unit so that the AC power cord
The use of optical instruments with this product (mains lead) can be unplugged from the wall
will increase eye hazard. As the laser beam used socket immediately in the event of trouble.
in this Blu-ray Disc/DVD player is harmful to
eyes, do not attempt to disassemble the cabinet.
Refer servicing to qualified personnel only.
2
On power sources
Precautions • The player is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the
This equipment has been tested and found to
player itself has been turned off.
comply with the limits set out in the EMC
• Disconnect the player from the wall outlet if
Directive using a connection cable shorter
you are not going to use the player for a long
than 3 metres.
time. To disconnect the AC power cord
On placement (mains lead), grasp the plug itself; never pull
• Place the player in a location with adequate the cord.
ventilation to prevent heat build-up in the • Observe following points to prevent the AC
player. power cord (mains lead) being damaged. Do
• To reduce the risk of fire, do not cover the not use the AC power cord (mains lead) if it
ventilation opening of the appliance with is damaged, as doing so may result in an
newspapers, tablecloths, curtains, etc. electric shock or fire.
• Do not expose the appliance to naked flame – Do not pinch the AC power cord (mains
sources (for example, lighted candles). lead) between the player and wall, shelf,
• Do not install this player in a confined space, etc.
such as a bookshelf or similar unit. – Do not put anything heavy on the AC
• Do not place the player outdoors, in power cord (mains lead) or pull on the AC
vehicles, on ships, or on other vessels. power cord (mains lead) itself.
• If the player is brought directly from a cold On adjusting volume
to a warm location, or is placed in a very
Do not turn up the volume while listening to a
damp room, moisture may condense on the
section with very low level inputs or no audio
lenses inside the player. Should this occur,
signals. Your ears and the speakers may be
the player may not operate properly. In this
damaged when the sound level reaches the
case, remove the disc and leave the player
peak.
turned on for about half an hour until the
moisture evaporates. On cleaning
• Do not install the player in an inclined Clean the cabinet, panel, and controls with a
position. It is designed to be operated in a soft cloth. Do not use any type of abrasive pad,
horizontal position only. scouring powder or solvent such as alcohol or
• Do not place heavy or unstable objects on benzine.
the player.
• Do not place any objects other than discs on On cleaning discs, disc/lens cleaners
the disc tray. Doing so may cause damage to Do not use cleaning discs or disc/lens cleaners
the player or the object. (including wet or spray types). These may
• Take out any discs from the tray when you cause the apparatus to malfunction.
move the player. If you don’t, the disc may
be damaged. On replacement of parts
• Disconnect the AC power cord (mains lead) In the events that this player is repaired,
and all other cables from the player when repaired parts may be collected for reuse or
you move the player. recycling purposes.
3
On connecting to the HDMI OUT jack Copy Protection
Observe the following as improper handling Please be advised of the advanced content
may damage the HDMI OUT jack and the protection systems used in both Blu-ray
connector. Disc™ and DVD media. These systems,
• Carefully align the HDMI OUT jack on the called AACS (Advanced Access Content
rear of the player and the HDMI connector System) and CSS (Content Scramble System),
by checking their shapes. Make sure the may contain some restrictions on playback,
connector is not upside down or tilted. analogue output, and other similar features.
The operation of this product and the
restrictions placed may vary depending on the
date of purchase, as the governing board of the
AACS may adopt or change its restriction
rules after the time of purchase.
Cinavia Notice
This product uses Cinavia technology to limit
• Be sure to disconnect the HDMI cable when the use of unauthorized copies of some
moving the player. commercially-produced film and videos and
their soundtracks. When a prohibited use of an
unauthorized copy is detected, a message will
be displayed and playback or copying will be
interrupted.
• Hold the HDMI connector straight when More information about Cinavia technology is
connecting or disconnecting the HDMI provided at the Cinavia Online Consumer
cable. Do not twist or force the HDMI Information Center at http://www.cinavia.com.
connector into the HDMI OUT jack. To request additional information about
Cinavia by mail, send a postcard with your
mailing address to: Cinavia Consumer
IMPORTANT NOTICE Information Center, P.O. Box 86851, San
Caution: This player is capable of holding Diego, CA, 92138, USA.
a still video image or on-screen display Copyrights and Trademarks
image on your television screen • “AVCHD” and the “AVCHD Progressive”
indefinitely. If you leave the still video logo are trademarks of Panasonic
image or on-screen display image Corporation and Sony Corporation.
displayed on your TV for an extended • Java is a trademark of Oracle and/or its
period of time you risk permanent damage affiliates.
to your television screen. Plasma display • , “XMB,” and “xross media bar” are
panel televisions and projection trademarks of Sony Corporation and Sony
televisions are susceptible to this. Computer Entertainment Inc.
• Manufactured under license from Dolby
If you have any questions or problems Laboratories. Dolby, Pro Logic, and the
concerning your player, please consult your double-D symbol are trademarks of Dolby
nearest Sony dealer. Laboratories.
,continued to page 6
4
Contents
2 WARNING
3 Precautions
Getting Started
7 Guide to Parts and Controls
11 Step 1: Supplied Accessories
11 Step 2: Connecting the Player
13 Step 3: Preparing for Network Connection
13 Step 4: Easy Setup
Playback
15 Playing a Disc
16 Playing from a USB Device
16 Playing via a Network
17 Available Options
Additional Information
24 Troubleshooting
27 Specifications
5
• Manufactured under license under U.S. • Windows Media is either a registered
Patent Nos: 5,956,674; 5,974,380; trademark or trademark of Microsoft
6,226,616; 6,487,535; 7,212,872; Corporation in the United States and/or
7,333,929; 7,392,195; 7,272,567 & other other countries.
U.S. and worldwide patents issued & This product contains technology subject to
pending. DTS-HD, the Symbol, & DTS-HD certain intellectual property rights of
and the Symbol together are registered Microsoft. Use or distribution of this
trademarks & DTS-HD Master Audio is a technology outside of this product is
trademark of DTS, Inc. Product includes prohibited without the appropriate license(s)
software. © DTS, Inc. All Rights Reserved. from Microsoft.
• The terms HDMI® and HDMI High- Content owners use Microsoft PlayReady™
Definition Multimedia Interface, and the content access technology to protect their
HDMI Logo are trademarks or registered intellectual property, including copyrighted
trademarks of HDMI Licensing LLC in the content. This device uses PlayReady
United States and other countries. technology to access PlayReady-protected
• Blu-ray Disc™, Blu-ray™, BD-Live™, content and/or WMDRM-protected content.
BONUSVIEW™, and the logos are If the device fails to properly enforce
trademarks of the Blu-ray Disc Association. restrictions on content usage, content
• “DVD Logo” is a trademark of DVD owners may require Microsoft to revoke the
Format/Logo Licensing Corporation. device’s ability to consume PlayReady-
• “DVD+RW,” “DVD-RW,” “DVD+R,” protected content. Revocation should not
“DVD-R,” “DVD VIDEO,” and “CD” logos affect unprotected content or content
are trademarks. protected by other content access
• “BRAVIA” is a trademark of Sony technologies. Content owners may require
Corporation. you to upgrade PlayReady to access their
• MPEG Layer-3 audio coding technology content. If you decline an upgrade, you will
and patents licensed from Fraunhofer IIS not be able to access content that requires
and Thomson. the upgrade.
• This product incorporates proprietary • Opera® Devices SDK from Opera Software
technology under license from Verance ASA. Copyright 2002-2012 Opera Software
Corporation and is protected by U.S. Patent ASA. All rights reserved.
7,369,677 and other U.S. and worldwide
patents issued and pending as well as
copyright and trade secret protection for
certain aspects of such technology. Cinavia
is a trademark of Verance Corporation.
Copyright 2004-2010 Verance Corporation. • All other trademarks are trademarks of their
All rights reserved by Verance. Reverse respective owners.
engineering or disassembly is prohibited. • Other system and product names are
generally trademarks or registered
trademarks of the manufacturers. ™ and ®
marks are not indicated in this document.
6
Getting Started
Front panel
Getting Started
z
The N button has a tactile dot. Use the tactile dot as a reference when operating the player.
7
Rear panel
8
A Z (open/close)
Remote Opens or closes the disc tray.
-TV- t (TV input select)
The available functions of the remote are Switches between TV and other
different depending on the disc or the input sources.
situation.
-TV- [/1 (TV on/standby)
Turns on the TV, or sets to standby
mode.
[/1 (on/standby)
Getting Started
Turns on the player, or sets to
standby mode.
B Number buttons (0 - 9)
Enters the title/chapter/track
numbers, etc.
b
Track numbers are applicable to CD-DA
(Music CD) only.
2 (volume) +/–
Adjusts the TV volume.
AUDIO (page 21)
Selects the language track when
multi-lingual tracks are recorded on
BD-ROMs/DVD VIDEOs.
Selects the sound track on CDs.
SUBTITLE (page 21)
Selects the subtitle language when
multi-lingual subtitles are recorded
on BD-ROMs/DVD VIDEOs.
(muting)
Turns off the sound temporarily.
C Colour buttons (red/green/
yellow/blue)
Shortcut keys for interactive
functions.
z
Number 5, AUDIO, 2 +, and N buttons D TOP MENU
have a tactile dot. Use the tactile dot as a Opens or closes the BD’s or DVD’s
reference when operating the player. Top Menu.
POP UP/MENU
Opens or closes the BD-ROM’s
Pop-up Menu, or the DVD’s menu.
9
OPTIONS (page 17) x (stop)
Displays the available options on the Stops playback and remembers the
screen. stop point (resume point).
HOME The resume point for a title/track is
Enters the player’s home menu. the last point you played or the last
Displays the wall paper when photo for a photo folder.
pressed on the category icon of the SEN (page 16)
home menu. Accesses the “Sony Entertainment
RETURN Network™” online service.
Returns to the previous display.
</M/m/, Home menu display
Moves the highlight to select a
displayed item.
The home menu appears when you press
Centre button (ENTER) HOME. Select a category using </,.
Enters the selected item. Select an item using M/m, and press
E ./> (previous/next) ENTER.
Skips to the previous/next chapter, Item Category
track, or file.
X (pause)
Pauses or re-starts playback.
m/M (fast reverse/fast
forward)
• Fast reverse/fast forward the disc
when you press the button during
playback. The search speed
changes each time you press the
button during video playback. [Setup]: Adjusts the player settings.
• Plays in slow motion, when [Photo]: Displays photos.
pressed for more than one second
[Music]: Plays music.
in pause mode.
[Video]: Plays videos.
• Plays one frame at a time, when
you press for a short time in pause [Network]: Displays network items.
mode.
N (play)
Starts or re-starts playback.
DISPLAY (page 16)
Displays the playback information
on the screen.
10
Step 1: Supplied Accessories
Check that you have the following items:
• High Speed HDMI Cable (1)
• Remote commander (remote) (1)
• R6 (size AA) batteries (2)
Getting Started
Step 2: Connecting the Player
Do not connect the AC power cord (mains lead) until you have made all the
connections.
Connecting to your TV
High quality
High Speed HDMI Cable
(supplied)
b
Do not connect the player through a VCR. Video signals from VCRs can be affected by copyright
protection systems that cause the picture on the TV to be distorted.
11
Connecting to your AV amplifier (receiver)
Select one of the following connection methods according to the input jacks on your
AV amplifier (receiver). When you select A or B, make the appropriate settings in
the [Audio Settings] setup (page 20).
12
Step 3: Preparing for Step 4: Easy Setup
Network Connection
When turned on for the first time
If you are not going to connect the player Wait for a short while before the
to a network, proceed to “Step 4: Easy player turns on and starts [Easy
Setup” (page 13). Initial Settings].
Wired Setup
1
Getting Started
Insert two R6 (size AA) batteries
by matching the 3 and # ends on
Use a LAN cable to connect to the LAN
the batteries to the markings
(100) terminal on the player.
inside the battery compartment.
LAN cable
(not supplied)
z
Using a shielded interface cable (LAN cable),
2 Plug the player into the mains.
straight or crossing, is recommended.
to mains
13
5 Perform [Easy Initial Settings].
Follow the on-screen instructions to
make the basic settings using
</M/m/, and ENTER on the
remote.
</M/m/,
ENTER
b
When [Easy Initial Settings] is complete,
select [Easy Network Settings] to use the
network functions of the player.
14
Enjoying BONUSVIEW/
Playback BD-LIVE
Playing a Disc Some BD-ROMs with the “BD-LIVE”
logo* have bonus contents and other
For playable discs, see page 28. data that can be downloaded for your
enjoyment.
1 Switch the input selector on your
TV so that the signal from the *
player appears on your TV screen.
1 Connect a USB memory to the
2
Playback
Press Z, and place a disc on the USB jack on the player (page 7).
disc tray. Use a 1 GB or larger USB memory
as your local storage.
15
Displaying the play Playing from a USB
information
Device
You can view the playback information, For “Playable types of files”, see
etc., by pressing DISPLAY. page 29.
The displayed information differs
depending on the disc type and player 1 Connect the USB device to the
status. USB jack on the player (page 7).
Refer to the instruction manual
Example: when playing a BD-ROM supplied with the USB device before
connecting.
16
1 Connect the player to a network Available Options
(page 13).
Various settings and playback
2 Press SEN button on the remote.
operations are available by pressing
3 Select an Internet content and a OPTIONS. The available items differ
depending on the situation.
variety of on-demand
entertainment using </M/m/,, Common options
and press ENTER. x [Repeat Setting]: Sets the repeat
mode.
x [Play]/[Stop]: Starts or stops the
Video streaming control panel
Playback
playback.
The control panel appears when the x [Play from start]: Plays the item
video file starts playing. The displayed from the beginning.
items may differ depending on Internet x [Change Category]: Switches
content providers. category between [Video],
To display again, press DISPLAY. [Music] and [Photo] category.
[Video] only
x [A/V SYNC]: Adjusts the gap between
picture and sound, by delaying the
sound output in relation to the picture
output (0 to 120 milliseconds).
x [Video Settings]:
– [Picture Quality Mode]: Selects the
A Control display picture settings for different lighting
Press </M/m/, or ENTER for environments.
playback operations. – [BNR]: Reduces the mosaic-like
B Playing status bar block noise in the picture.
Status bar, Cursor indicating the – [MNR]: Reduces minor noise
current position, Playing time, around the picture outlines
Duration of the video file (mosquito noise).
x [Pause]: Pauses the playback.
C Network condition
x [Top Menu]: Displays the BD’s or
indicates the wired connection.
DVD’s Top Menu.
D Network transmission speed x [Menu]/[Popup Menu]: Displays the
E The file name of the next video BD-ROM’s Pop-up Menu or DVD’s
menu.
F The file name of the current video
x [Title Search]: Searches for a title on
selection
BD-ROMs/DVD VIDEOs and starts
playback from the beginning.
x [Chapter Search]: Searches for a
chapter and starts playback from the
beginning.
17
x [Audio]: Switches the language track
when multilingual tracks are recorded
on BD-ROMs/DVD VIDEOs. Selects
the sound track on CDs.
x [Subtitle]: Switches the subtitle
language when multilingual subtitles
are recorded on BD-ROMs/DVD
VIDEOs.
x [Angle]: Switches to other viewing
angles when multi-angles are
recorded on BD-ROMs/DVD
VIDEOs.
x [IP Content Noise Reduction]:
Adjusts the picture quality of Internet
contents.
[Music] only
x [Add Slideshow BGM]: Registers
music files in the USB memory as
slideshow background music (BGM).
[Photo] only
x [Slideshow Speed]: Changes the
slideshow speed.
x [Slideshow Effect]: Sets the effect
for slideshows.
x [Slideshow BGM]:
– [Off]: Turns off the function.
– [My Music from USB]: Sets the
music files registered in [Add
Slideshow BGM].
– [Play from Music CD]: Sets the
tracks in CD-DAs.
x [Change Display]: Switches
between [Grid View] and [List View].
x [View Image]: Displays the selected
photo.
x [Slideshow]: Plays a slideshow.
x [Rotate Left]: Rotates the photo
counterclockwise by 90 degrees.
x [Rotate Right]: Rotates the photo
clockwise by 90 degrees.
18
Settings and Adjustments
[Screen Settings]
x [TV Type]
Using the Settings [16:9]: Select this when connecting to a
Displays wide-screen TV or a TV with a wide
mode function.
Select [Setup] on the home menu [4:3]: Select this when connecting to a
when you need to change the settings of 4:3 screen TV without a wide mode
the player. function.
The default settings are underlined.
x [Screen Format]
1 Select [Setup] on the home [Full]: Select this when connecting to a
menu using </,.
19
x [Cinema Conversion Mode] x [HDMI Deep Colour Output]
[Auto]: Normally select this. The player [Auto]: Normally select this.
automatically detects whether the [16bit]/[12bit]/[10bit]: Outputs 16bit/
material is video-based or film-based, 12bit/10bit video signals when the
and switches to the appropriate connected TV is compatible with Deep
conversion method. Colour.
[Video]: The conversion method suited [Off]: Select this when the picture is
for video-based material will always be unstable or colours appear unnatural.
selected regardless of the material.
x [Pause Mode]
x [Output Video Resolution] [Auto]: Normally select this. Dynamic
Normally select [Auto]. Select [Original moving pictures appear without blurring.
Resolution] to output the resolution [Frame]: Displays static pictures at high
recorded on the disc. When the resolution.
resolution is lower than the SD
resolution, it is scaled up to the SD
resolution.
[Audio Settings]
x [BD-ROM 24p Output]
[Auto]: Outputs 1920 × 1080p/24 Hz
x [Digital Audio Output]
video signals only when connecting a
1080/24p-compatible TV using the [Auto]: Normally select this. Outputs
HDMI OUT jack. audio signals according to the status of
[On]: Turns on the function. the connected devices.
[Off]: Select this when your TV is not [PCM]: Outputs PCM signals from the
compatible with 1080/24p video signals. DIGITAL OUT (COAXIAL)/HDMI
OUT jack.
x [DVD-ROM 24p Output]
x [BD Audio MIX Setting]
[Auto]: Outputs 1920 × 1080p/24 Hz
video signals only when connecting a [On]: Outputs the audio obtained by
1080/24p-compatible TV using the mixing the interactive and secondary
HDMI OUT jack. audio to the primary audio.
[Off]: Select this when your TV is not [Off]: Outputs the primary audio only.
compatible with 1080/24p video signals. Select this to output HD audio signals to
an AV amplifier (receiver).
x [YCbCr/RGB (HDMI)]
[Auto]: Automatically detects the
connected TV type, and switches to the
matching colour setting.
[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2
video signals.
[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4
video signals.
[RGB]: Outputs RGB video signals.
20
x [DTS Neo:6]
[Cinema]/[Music]: Outputs the [BD/DVD Viewing
simulated multi-channel sound from
2 channel sources via the HDMI OUT Settings]
jack according to the capability of the
connected device using DTS Neo:6 x [BD/DVD Menu Language]
Cinema or DTS Neo:6 Music mode. Selects the default menu language for
[Off]: Outputs the sound with its original BD-ROMs or DVD VIDEOs.
number of channels via the HDMI OUT Select [Select Language Code], and
jack. enter the code for your language,
referring to “Language code list”
x [Audio DRC] (page 31).
[Auto]: Performs playback at the
dynamic range specified by the disc x [Audio Language]
21
[Parental Control [System Settings]
Settings]
x [OSD Language]
Selects on-screen display language for
x [Password] your player.
Sets or changes the password for the
Parental Control function. A password
x [HDMI Settings]
allows you to set a restriction on BD-
By connecting Sony components that are
ROM or DVD VIDEO, and Internet
compatible with HDMI functions with a
video playback. If necessary, you can
High Speed HDMI Cable, operation is
differentiate the restriction levels for
simplified.
BD-ROMs, DVD VIDEOs, and Internet
videos.
[Control for HDMI]
[On]: The following BRAVIA Sync
x [Parental Control Area Code] features are available:
Playback of some BD-ROMs, DVD – One-Touch Play
VIDEOs, or Internet videos can be – System Power-Off
limited according to the geographic area. – Language Follow
Scenes may be blocked or replaced with [Off]: Turns off the function.
different scenes. Follow the on-screen
instructions and enter your four-digit z
password. For details, refer to the instruction manual
supplied with the TV or components.
22
x [Quick Start Mode]
[On]: Shortens the startup time when [Network Settings]
turning on the player.
[Off]: Reduces standby power
x [Internet Settings]
consumption.
Connect the player to the network
beforehand. For details, see “Step 3:
x [Auto Standby] Preparing for Network Connection”
[On]: Automatically returns to standby (page 13).
mode if no button is pressed for more
than 30 minutes. x [Network Connection Status]
[Off]: Turns off the function. Displays the current network status.
23
The display language on the screen
Additional Information switches automatically when
connected to the HDMI OUT jack.
, When [Control for HDMI] in [HDMI
Troubleshooting Settings] is set to [On] (page 22), the
display language on the screen
If you experience any of the following automatically switches according to
difficulties while using the player, use the language setting of the connected
this troubleshooting guide to help TV (if you change the setting on your
remedy the problem before requesting TV, etc.).
repairs. Should any problem persist,
consult your nearest Sony dealer.
Sound
Picture There is no sound or the sound is not
output correctly.
There is no picture or the picture is , Check that all the connecting cables
not output correctly. are securely connected (page 11).
, Check that all the connecting cables , Switch the input selector on your AV
are securely connected (page 11). amplifier (receiver) so that the audio
, Switch the input selector on your TV signals of the player are output from
to display the signal from the player. your AV amplifier (receiver).
, Reset the [Output Video Resolution] to , If the audio signal does not come
the lowest resolution by pressing x on through the DIGITAL OUT
the player for more than 10 seconds. (COAXIAL)/HDMI OUT jack, check
, Try the following: 1Turn the player the audio settings (page 20).
off and on again. 2Turn the connected , For HDMI connections, try the
equipment off and on again. following: 1Turn the player off and
3Disconnect and then reconnect the on again. 2Turn the connected
HDMI cable. equipment off and on again.
, The HDMI OUT jack is connected to a 3Disconnect and then reconnect the
DVI device that does not support HDMI cable.
copyright protection technology. , For HDMI connections, if the player is
, Check the [Output Video Resolution] connected to a TV through an AV
settings in the [Screen Settings] setup amplifier (receiver), try connecting the
(page 20). HDMI cable directly to the TV. Refer
, For BD-ROMs, check the [BD-ROM also to the instruction manual supplied
24p Output] setting in the [Screen with the AV amplifier (receiver).
Settings] setup (page 20). , The HDMI OUT jack is connected to a
, For DVD-ROMs, check the [DVD- DVI device (DVI jacks do not accept
ROM 24p Output] setting in the audio signals).
[Screen Settings] setup (page 20).
24
, The device connected to the HDMI , The disc has a format that cannot be
OUT jack does not support the audio played back by this player (page 28).
format of the player. Check the audio , The player cannot play a recorded disc
settings (page 20). that is not correctly finalised.
, The region code on the BD or DVD
The HD Audio (Dolby Digital Plus, does not match the player.
Dolby TrueHD, DTS-HD High
Resolution Audio, and DTS-HD
USB device
Master Audio) is not output by
bitstream.
The player does not detect a USB
, Set [BD Audio MIX Setting] in [Audio
Settings] setup to [Off] (page 20). device connected to the player.
, Check that the connected AV amplifier , Make sure that the USB device is
(receiver) is compatible with each HD securely connected to the USB jack.
Audio format. , Check if the USB device or a cable is
damaged.
Additional Information
, Check if the USB device is on.
The interactive audio is not output. , If the USB device is connected via a
, Set [BD Audio MIX Setting] in [Audio USB hub, connect the USB device
Settings] setup to [On] (page 20). directly to the player.
25
, When you connect the player to a TV
Network connection through an AV amplifier (receiver),
– if the AV amplifier (receiver) is not
compatible with the [Control for
The player cannot connect to the
HDMI] function, you may be unable
network.
to control the TV from the player.
, Check the network connection
– if you change the HDMI
(page 13) and the network settings
connection, disconnect and
(page 23).
reconnect the AC power cord
(mains lead), or a power failure
The message [A new software version occurs, try the following: 1Switch
is available. Please go to the “Setup” the input selector of the AV
section of the menu and select amplifier (receiver) so that the
picture from the player appears on
“Network update” to perform the
the TV screen. 2Set [Control for
update.] appears on the screen when HDMI] in [HDMI Settings] to [Off],
turning the player on. then set [Control for HDMI] in
, See [Network Update] (page 19) to [HDMI Settings] to [On] (page 22).
update the player to a newer software Refer to the instruction manual
version. supplied with the AV amplifier
(receiver).
26
Message Code 1 [Playback stopped.
The content being played is protected Specifications
by Cinavia and is not authorized for
playback on this device. For more System
information, see http:// Laser: Semiconductor laser
www.cinavia.com. Message Code 1.] Inputs and outputs
appears on the screen when playing a (Jack name:
disc. Jack type/Output level/Load
impedance)
, The audio track of the video that you
DIGITAL OUT (COAXIAL):
are playing contains a Cinavia code Phono jack/0.5 Vp-p/75 ohms
indicating it was intended for HDMI OUT:
presentation using professional HDMI 19-pin standard connector
equipment only and is not authorized LAN (100):
for playback by consumers (page 4). 100BASE-TX Terminal
USB:
USB jack Type A, maximum current
Additional Information
The disc tray does not open and you 500 mA (For connecting USB device)
cannot remove the disc even after you
press Z. General
, Try the following: 1Turn the player Power requirements:
110 V - 240 V AC, 50/60 Hz
off, and disconnect the AC power cord
Power consumption: 8.8 W
(mains lead). 2Reconnect the AC Dimensions (approx.):
power cord (mains lead) while 290 mm × 199 mm × 43 mm
pressing down Z on the player. (width/depth/height)
3Keep pressing down Z on the player incl. projecting parts
until the tray opens. 4Remove the Mass (approx.): 1.1 kg
disc. 5Hold down [/1 on the player Operating temperature:
for more than 10 seconds until the 5 ºC to 35 ºC
player turns off. Operating humidity:
25 % to 80 %
27
Note on Discs
Playable discs This product is designed to playback
discs that conform to the Compact Disc
(CD) standard. DualDiscs and some of
Blu-ray BD-ROM the music discs encoded with copyright
Disc*1 BD-R*2/BD-RE*2
protection technologies do not conform
DVD-ROM to the Compact Disc (CD) standard,
DVD*3 DVD-R/DVD-RW therefore, these discs may not be
DVD+R/DVD+RW playable by this product.
CD-DA (Music CD) Note on playback operations of BDs/
CD*3 CD-ROM
CD-R/CD-RW DVDs
Some playback operations of BDs/
*1 Since the Blu-ray Disc specifications are DVDs may be intentionally set by
new and evolving, some discs may not be software producers. Since this player
playable depending on the disc type and the plays BDs/DVDs according to the disc
version. contents the software producers
The audio output differs depending on the designed, some playback features may
source, connected output jack, and selected not be available.
audio settings.
*2 BD-RE: Ver.2.1 Note about double-layer BDs/DVDs
BD-R: Ver.1.1, 1.2, 1.3 including organic The playback pictures and sound may be
pigment type BD-R (LTH type) momentarily interrupted when the layers
The BD-Rs recorded on a PC cannot be
switch.
played if postscripts are recordable.
*3 A CD or DVD disc will not play if it has not Region code (BD-ROM/DVD VIDEO
been correctly finalised. For more
only)
information, refer to the instruction manual
supplied with the recording device. Your player has a region code printed on
the rear of the unit and will only play
Discs that cannot be played BD-ROMs/DVD VIDEOs labelled with
• BDs with cartridge identical region codes or ALL .
• BDXLs
• DVD-RAMs
• HD DVDs Region code
• DVD Audio discs
• PHOTO CDs
• Data part of CD-Extras
• Super VCDs
• Audio material side on DualDiscs
28
Playable types of files
Video
Codec Container Extension With Audio
MPEG-1
PS .mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG
Video
MPEG-2 PS .mpg, .mpeg Dolby Digital, DTS, LPCM, MPEG
Video TS .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
AVI .avi Dolby Digital, LPCM, WMA9, MP3
Xvid
MKV .mkv Dolby Digital, LPCM, AAC, MP3
MKV .mkv Dolby Digital, LPCM, AAC, MP3
MP4 .mp4, .m4v AAC
MPEG4/ TS .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
Additional Information
AVC*1 Quick Time .mov Dolby Digital, LPCM, AAC, MP3
.3gp, .3g2,
3gpp/3gpp2 AAC
.3gpp, .3gp2
VC1 TS .m2ts, .mts Dolby Digital, DTS, LPCM, MPEG, AAC
WMV9 ASF .wmv, .asf WMA9
Quick Time .mov Dolby Digital, LPCM, AAC, MP3
Motion JPEG
AVI .avi Dolby Digital, LPCM, AAC, MP3
Format
AVCHD (Ver.2.0)*2*3
Music Photo
Codec Extension Format Extension
MP3 (MPEG-1 JPEG .jpeg, .jpg, .jpe
Audio Layer III)*4 .mp3
PNG .png*5
AAC/HE-AAC*4 .m4a, .aac
GIF .gif*5
WMA9 Standard .wma
LPCM*4 .wav
FLAC .flac, .fla
Dolby Digital*4 .ac3
29
*1 The player can support AVC up to Level
*2
4.1. Notes About the Discs
The player can support frame rate up to
60 fps.
*3 The player plays AVCHD format files that • To keep the disc
are recorded on a digital video camera, etc. clean, handle the
The AVCHD format disc will not play if it disc by its edge. Do
has not been correctly finalised. not touch the
*4 The player can play “.mka” files. surface.
*5 The player does not play animated PNG or Dust, fingerprints, or scratches on the
animated GIF files. disc may cause it to malfunction.
• Do not expose the disc to direct
b
sunlight or heat sources such as hot air
• Some files may not play depending on the
format, the encoding, or recording ducts, or leave it in a car parked in
condition. direct sunlight as the temperature may
• Some files edited on a PC may not play. rise considerably inside the car.
• Some files may not be able to perform fast • After playing, store the disc in its case.
forward or fast reverse function. • Clean the disc with a
• The player does not play coded files such as cleaning cloth. Wipe
DRM and Lossless. the disc from the
• The player can recognise the following files centre out.
or folders in BDs, DVDs, CDs and USB
• Do not use solvents
devices:
– up to folders in the 9th layer, including the such as benzine,
root folder thinner, commercially available disc/
– up to 500 files/folders in a single layer lens cleaners, or anti-static spray
• The player can support frame rate: intended for vinyl LPs.
– up to 60 fps for AVCHD (MPEG4/AVC) • If you have printed the disc’s label, dry
only. the label before playing.
– up to 30 fps for other video codecs. • Do not use the following discs.
• The player can support video bit rate up to – A lens cleaning disc.
40 Mbps.
– A disc that has a non-standard shape
• The player can support video resolution up
to 1920 × 1080p. (e.g., card, heart).
• Some USB devices may not work with this – A disc with a label or sticker on it.
player. – A disc that has cellophane tape or
• The player can recognise Mass Storage sticker adhesive on it.
Class (MSC) devices, Still Image Capture • Do not resurface the playing side of a
Device (SICD) class devices and 101 disc to remove surface scratches.
keyboard.
• To avoid data corruption or damage to the
USB memory or devices, turn off the player
when connecting or removing the USB
memory or devices.
• The player may not play high bit rate video
files on DATA CDs smoothly. It is
recommended to play such files using
DATA DVDs or DATA BDs.
30
Code Language
Code numbers of controllable 1130 Bhutani; 1142 Greek
TVs Dzongkha
1144 English 1145 Esperanto
1149 Spanish 1150 Estonian
While holding down -TV- [/1, enter the 1151 Basque 1157 Persian
TV manufacturer’s code using the 1165 Finnish 1166 Fiji
number buttons. 1171 Faroese 1174 French
If more than one code number is listed, 1181 Frisian 1183 Irish
try entering them one at a time until you 1186 Scots Gaelic 1194 Galician
find the one that works with your TV. 1196 Guarani 1203 Gujarati
1209 Hausa 1217 Hindi
Manufacturer Code number 1226 Croatian 1229 Hungarian
1233 Armenian 1235 Interlingua
Sony 01 (default)
1239 Interlingue 1245 Inupiak
Hitachi 24 1248 Indonesian 1253 Icelandic
1254 Italian 1257 Hebrew
LG/Goldstar 76 1261 Japanese 1269 Yiddish
Additional Information
Loewe 45 1283 Javanese 1287 Georgian
1297 Kazakh 1298 Greenlandic;
Panasonic 17, 49 Kalaallisut
1299 Cambodian; 1300 Kannada
Philips 06, 08, 72 Khmer
Samsung 71 1301 Korean 1305 Kashmiri
1307 Kurdish 1311 Kirghiz
Sharp 29 1313 Latin 1326 Lingala
1327 Laothian; Lao 1332 Lithuanian
Toshiba 38
1334 Latvian 1345 Malagasy
1347 Maori 1349 Macedonian
1350 Malayalam 1352 Mongolian
Language code list 1353 Moldavian 1356 Marathi
1357 Malay 1358 Malese;
For details, see [BD/DVD Viewing Maltese
1363 Burmese 1365 Nauru
Settings] (page 21).
1369 Nepali 1376 Dutch
The language spellings conform to the 1379 Norwegian 1393 Occitan
ISO 639: 1988 (E/F) standard. 1403 Oromo 1408 Oriya
1417 Punjabi; 1428 Polish
Code Language Panjabi
1027 Afar 1028 Abkhazian 1435 Pashto; 1436 Portuguese
1032 Afrikaans 1039 Amharic Pushto
1044 Arabic 1045 Assamese 1463 Quechua 1481 Rhaeto-
Romance
1051 Aymara 1052 Azerbaijani
1482 Kirundi; Rundi 1483 Romanian
1053 Bashkir 1057 Byelorussian
1489 Russian 1491 Kinyarwanda
1059 Bulgarian 1060 Bihari
1495 Sanskrit 1498 Sindhi
1061 Bislama 1066 Bengali
1501 Sangho; 1502 Serbo-
1067 Tibetan 1070 Breton Sango Croatian
1079 Catalan 1093 Corsican 1503 Singhalese; 1505 Slovak
1097 Czech 1103 Welsh Sinhalese
1105 Danish 1109 German 1506 Slovenian 1507 Samoan
31
Code Language
1508 Shona 1509 Somali
1511 Albanian 1512 Serbian
1513 Siswati; Swati 1514 Sesotho;
Sotho
southern
1515 Sundanese 1516 Swedish
1517 Swahili 1521 Tamil
1525 Telugu 1527 Tajik
1528 Thai 1529 Tigrinya
1531 Turkmen 1532 Tagalog
1534 Setswana; 1535 Tonga; Tonga
Tswana islands
1538 Turkish 1539 Tsonga
1540 Tatar 1543 Twi
1557 Ukrainian 1564 Urdu
1572 Uzbek 1581 Vietnamese
1587 Volapük 1613 Wolof
1632 Xhosa 1665 Yoruba
1684 Chinese 1697 Zulu
1703 Not specified
32
The software of this player may be updated in the future. For information about any
available updates and the latest Operating Instructions, please visit the following
website:
http://www.sony-asia.com/support/
4-442-381-41(1)