Professional Documents
Culture Documents
Description
Medium viscosity, 100% solids, high modulus epoxy adhesive, designed for bonding fresh concrete to
hardened concrete as well as hardened concrete to hardened concrete. Exceeds ASTM C881, Type
I, II, IV, and V, Grade 2, Class B and C.
Main Applications
Designed for bonding fresh concrete to hardened concrete or hardened concrete to hardened
concrete. Admix Epoxy Bond provides a tenacious bond to several construction materials making it
ideal for anchoring bolts, dowels, rebar and metallic fixtures.
Application Instructions
Surface Preparation
Surface must be sound and clean. Remove any surface laitance, loose material, grease, oil, curing
compounds, mold release agents or any other products that may interfere in the bond interface. The
surface profile should be mechanically abraded. Vacuum any dust or foreign material (preferred
method to blowing with compressed air). When using on metallic surface, abrade to a white metal
surface.
Mixing:
Condition material to 18 - 30 °C (65°-85°F) before proceeding. Make sure the air and surface
temperature is above 5°C (40°F). Premix each component separately. Place 1 part by volume of
component B into a clean pail and add 1 part by volume of Component A slowly on top. Mix using a
low speed drill equipped with a Jiffy mixer and paddle. Avoid air entrapment. Scrape sides of pail and
mix until a homogenous, streak free, uniform grey product is achieved. Prepare only enough product
that can be used within the pot life.
Placement
To bond fresh concrete to hardened concrete (or hardened concrete to hardened concrete), apply
Admix Epoxy Bond by roller, brush, or spray making sure the product is worked into the surface of the
concrete at 20 mils (0.50 mm). Place hardened concrete or fresh concrete while the product is still
tacky.
To bond hardened concrete to hardened concrete, apply at a maximum thickness of 1/8” (3 mm)
and clamp both pieces for up to 24 hours.
Page 1 of 3
LLCMS117 rev01
Technical Properties
Properties Fact Method
Specification ASTM C881, Type I, II, IV and V, Grade 2, Class B ASTM C881
and C
Mixing Proportions 1:1 by volume N/A
Color (mixed) Gray N/A
Viscosity [Cps] 3,000 – 6,000 ASTM D2393
Gel Time @ 20 ° C, 50% RH [min] 60 ASTM C881
Slant shear bond, [psi] ASTM C882
Hardened to Hardened, 2 days 3,160 >1,000
Hardened to Hardened, 14 days 3,150 >1,500
Hardened to Fresh, 14 days 3,150 >1,500
Service Temperature -40 °C to +90°C Internal
Application Temperature +5°C to +40°C Internal
Coverage
Admix Epoxy Bond is applied at a rate of 80 ft2 / gallon (1.96 m2 / liter) applied at the recommended
thickness of 20 mils (0.5 mm).
Packaging
1 gallon (3.78 liters) and 1/4 gallon (0.95 liters).
Storage
Store in original, closed container in an indoor, cool (40 – 90°F, 4 – 32 °C), dry place for up to
1 year from date of manufacture.
Page 2 of 3
LLCMS117 rev01
Page 3 of 3