Professional Documents
Culture Documents
T
If the mass of the girder is 3Mg and its
center of mass is located at point G,
I
determine the tension developed in cables M
AB, BC, and BD for equilibrium. E
S
U
P
21.5 kN
ENG’G MECH: STATICS 60 sec
T
If block B weighs 200lb and block C
weighs 100lb, determine the required
I
angle ϴ for equilibrium. M
E
S
U
P
64.3°
ENG’G MECH: STATICS 180 sec
U
P
35°
ENG’G MECH: STATICS 60 sec
U
P
0.914 m
ENG’G MECH: STATICS 60 sec
U
P
500 N-m (counter-clockwise)
ENG’G MECH: STATICS 60 sec
U
P
2193.58 N
ENG’G MECH: DYNAMICS 45 sec
U
P
76 m
ENG’G MECH: DYNAMICS 45 sec
U
P
1.29 m/sec
ENG’G MECH: DYNAMICS 45 sec
The fireman holds the hose at an angle ϴ=30°
with horizontal, and the water is discharged from T
the hose at A with a speed of vA=40ft/sec . If the I
water stream strikes the building at B, determine
his two possible distances s from the building. M
E
S
U
P
8.68 ft
ENG’G MECH: DYNAMICS 45 sec
U
P
1280 ft
ENG’G MECH: DYNAMICS 45 sec
U
P
3.33 m/sec (upward)