Professional Documents
Culture Documents
LONGHOLE DRILL
TECHNICAL SPECIFICATION
Length with shank adapter 1 241 mm Rotation pressure controlled feed With one-hole automation
Diagnostics system Interactive
DRILLING MODULE
Type of drilling module LFRC700 (TS2-341) ELECTRIC SYSTEM
Rod length 1 220 - 1 830 mm (4’ - 6’) Standard voltages 380 - 690 V (50 or 60 Hz)
Storing capacity 20 + 1 rods (all threads) Main switch gear MSE 10
Retaining centralizer Pito 7 IP-classification Specification TS2-132
Cuttings diverter CC705 Allowed voltage fluctuation ± 10%
Set-off from stope face 800 mm (minimum) Starting method Star-Delta (380 - 690 V)
Feed force 31 kN Soft starter (575 V)
Feed and return speed 0.3 m/s (fast feed) Automatic cable reel TCR3E
Cable reel remote control At operator station and cable reel
DRILLING MODULE DIMENSIONS Front and rear lights
10 x 50 W LED
Type Rod length Total length (combined working and driving)
Service brakes Hydraulically applied wet disc brakes Air and water system
Parking / emergency brakes SAHR type, fail safe wet disc brakes *Air compressor CT28 (2.8 m³/min, 18.5 kW) or
2 x CT28 (5.6 m³/min, 37 kW)
Horizontal (0%): 15 km/h Air mist flushing kit For external air and water supply
Tramming speed
14% = 1:7 = 8º: 6.5 km/h Compressed air outlet Quick coupling for pneumatic
Gradeability / sideways tilt Max. 15° / 5° tools
1 x 60 liter air receiver For end-of-hole flushing (requires
2 x Hydraulic telescopic jacks (front) CT28)
Carrier stabilization
2 x Hydraulic jacks (rear) Water hose reel and hose THR2.5E and Ø38 mm hose
Fuel tank 140 liters (length 65 m)
Hand throttle Standard
Operator’s safety cabin or canopy
Filling pump for hydraulic oil Electric *Stainless steel cabin FOPS (ISO 3449)
Hand held fire extinguisher 7.7 or 9 kg (type ABC) *Safety canopy and safety grill FOPS (ISO 3449)
Cabin heating system For drilling and tramming
Carrier centralized greasing Specification 5-2110
points
Fire suppression system
Tramming alarm Standard Additional fire extinguisher 7.7 or 9 kg (type ABC)
Tramming camera Front, rear and side Fire suppression system Sandvik FS1000 (above 0°C)
Manual or automatic system Ansul (6 nozzles)
Colour scheme Sandvik standard
2 x Operator’s manual
2 x Maintenance manual Carrier
Documentation 2 x Technical manual (in English only) Reduced tramming speed 3 rd gear lockout
2 x Parts manual (in English only) *Foam filled tires 4 pcs
1 x Toolman CD Fast filling and evacuation system Wiggins (complete)
Wheel chocks and holders 2 pcs
OPTIONAL ITEMS
Extra items
Drilling system Spare rock drill HL710S or HL820ST
*HL710S rock drill With 55 kW powerpack Spare wheel assembly Standard or foam filled tires
Spare remote control panel For offboard use Special tools for rock drill Field kit or complete set
Drilling module wear parts kit For alternative tools Documentation Extra manuals
Power extractor For HL710S or HL820ST Package: Country specific USC, AUS and EUR
Rear stinger extension kit Extension 1000 mm options
Package: Harsh water Basic or advanced (TS2-049)
Hydraulic system Package: Onboard air supply Specification TS2-328
*Oil-to-air cooler for hydraulic oil 2 x OA30 (30 kW) in place of the
water hose reel *) replaces standard feature
Vacuum pump For hydraulic oil
Instrumentation
Access detector or protector Mandatory in Europe (TS2-211)
Drilling instrument TMS for DL400 series (TS2-122)
Spirit level angle indicators 2 pcs (on feed)
Automation
OptiMine remote monitoring For data management
One-hole automation (including Specification TS2-198
TMS)
Tele-remote drilling (WLAN/LAN) Including data transfer
Data transfer USB/WLAN (excluding drill plan
software)
Cleaning system
Low pressure system with reel Up to 15 bar (5-2120)
High pressure system with reel Up to 220 bar (5-2120)
Greasing systems
Automatic system Lincoln (for carrier, boom and rod
handler)
Manual system Specification 5-2110
TS2-274:02/ENG/METRIC © Sandvik Mining and Rock Technology 2016 SANDVIK is a registered trademark owned by Sandvik Intellectual Property AB in Sweden and other countries.
Up to 4 260
H
Up to 4 020
1 995
2 240
1 280
550
Wp Minimum hole distance
1 040 880
8°
3 700
7 200
2 940 (4')
750
4 470 3 240 (5')
3 550 (6')
750
34°
All dimensions in mm
Sandvik Mining and Rock Technology reserves the right to make changes to the information on this data sheet without prior notification to users.
Please contact a Sandvik representative for clarification on specifications and options.
SANDVIK.COM