Professional Documents
Culture Documents
KIRUNAELECTRIC
Technical features
»»Safe working environment • Low operating cost
• Low noise and low heat generation
• The truck is powered by an overhead trolley line
• Long asset life
(no exhaust fumes)
• Flexible, transportable and expandable trolley line
• The auxillary diesel engine is mainly used when there is no
• The investment can be extended along with the expansion
access to the trolley line e.g. loading and dumping stations
of the mine
• High speed up steep inclines means shorter ramps, lower
• Early return on capital employed
development costs and more production from fewer trucks
• Environmentally friendly
through shorter times. Fewer operators are required; with
• 4-wheel drive with onte AC motor on each axle
reduced traffic levels and less ramp congestion
• Energy savings from regenerative braking which puts power
back to the network and reducing brake wear and the related »»Standard
maintenance. Minimal emissions drastically reduce the • CE mark according to European standards
ventilation requirement, wich saves energy costs and
provides a healthier underground environment
Electric Minetruck EMT50
Specifications
»»Engine »»Hydraulic system
• Brand/model . ....................................... 904 Mercedes 107 kW • System pressure.......................................................... 17,5 Mpa
Continuous at 1900 rpm • Hydraulic tank capacity................................................ 300 dm3
• Pump displacement................................................ 97/39 cm3/v
• Accumulator capacity................................................. 2x10 dm3
»»Axels • Wing pumps for steering, tipping and brake accumulators.
The pumps are driven by a DC auxiliary motor. Hydraulic
• Two rigid axels brand Kessler
fluid reservoir with full-flow pressure filter and return filter,
accumulator system
»»Brakes • Hydraulic articulated frame steering, double-acting cylinders
with end positions stops
• Standard service brakes with dual circuits, hydraulic • Fully hydraulic closed centre system
multi-disc brakes with forced oil cooling. In normal working • Steering deflection.........................................................+/-45 gr
condition the truck is connected to the trolley line and • Turning radius, inner...................................................... R 5089
electrical braking is used • Turning radius, outer.................................................... R 11248
Parking brake: Spring applied oil released wet disc brake on • Pivot angle between front and rear frames....................+/-15 gr
each wheel • When the service motor is no longer working the truck can be
Service brake: Oil pressure operated acted on each wheel towed and steered by the 24V tow steering system
Parking brake and rock box hoisting interlocked for safety • On single acting 5-stage telescopic cylinder for dumping
Parking brake and 24V starting circuit interlocked for safety
»»Fuel
»»Tyres
• Fuel tank capacity.........................................................80 litres
• Tubeless, treaded for underground mineservice
• Tyre dimensions...........................35/65 R33 XLD DI A**L4R
• Tyre pressure.................................................................5,25 bar »»Suspension
• Two rubber cushions and shock absorbes on each axle
»»Enclosed Operator´s Cabin
• Enclosed cabin with filter intake air, front and rear winshield »»Included features
wipers and washers, electrically adjustable rearview mirrors.
• Fireextinguishers
Eguipeed with operator controls, gauges and indictors for easy
• Centralmanual lubrication
safe operator
+- 45°
R 5098
R 11 103
6 498 2 000
7 498
3 740
55°
Hinge
KIRUNAELECTRIC
Rest position 3 470
6 785
3 322
3 300
3 000
1 410
894
1 562
6 596 5221
(11 817)
© Copyright 2013 Atlas Copco Rock Drills AB, Örebro, Sweden. All product names in this publication are trademarks of Atlas Copco. Any unauthorized use or copying of the contents or any part thereof is prohibited. Illustrations and photos may show
9851 3226 01 equipment with optional extras. No warranty is made regarding specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific information. Graphic by Tomas Öhrling.