Professional Documents
Culture Documents
• Measurement different optical path lengths for various ranges and application
• Factory pre-calibration for easy set up and field calibration for more accuracy
450 UVUVLight
Strahlung Visible light
sichtbare Strahlung (Vis)
wave(Vis) 100
400
350
80
300
250 60
NO3, COD_total unkompensiertes Spektrum
NO2- Uncompensated spectrum: indicates
200 NNO2 CSB-gesamt,
BOD (linke Achse)
dissolved and non-soluble substances
TOCBenzene
NO3- TOC
Toluene 40
150 N
Xylene
Tr黚 ung, Feststoffkonzentration,
Turbidity、 TSS (Total suspended AFS
100 Phenol.
particles), etc. 20
50 COD_dissolv
CSB-gel鰏t,
Chroma
Farbe Turbidity compensation spectrum:
tr黚 ungskompensiertes Spektrum
edDOC indicates only soluble components
(rechte Achse)
0 DOC 0
200 250 300 350 400 450 500 550 600 650 700 750
[Nanometer]
Wavelengthλ(nm) s::can Messtechnik GmbH
Ahlsansch Sewage
Shijiazhuang Sewage
Sensor type:
TS7-1:0.01~500NTU;
TS7-2:50G/L;
TS7-3:120G/L。
316L housing
Abrasive sapphire measuring window
Self-cleaning scraper
Ball valve insertion type option
FLUORIMETER
DO7 FLUORESCENCE DISSOLVED OXYGEN
• The DO7 sensor utilizes lifetime-based optical fluorescence sensor
technology to provide an extremely stable, precise and low
maintenance dissolved oxygen sensor.
co2,Nh3,so4,cl-,cl2,etc.
• 316l housing
• Applications:
• Drinking water
• ……
CP BA(blue-green
SPECIFICATIONS OW(Oil in Water)
(Chlorophyll) algae)
Light Source LED with anti-interference filter
Light Source 254nm 470nm 590nm
Wavelength
Absorbance 360nm 685nm, 20nm 655nm,20nm
wavelength resolution resolution
Measuring Range 0~50ppb,500ppb(μg/L) 0~20ppb(μg/L) 0~20ppb(μg/L)
0~500ppb,5000ppb 0~500ppb(μg/L) 0~500ppb(μg/L)
• PH7-PH Sensor
Range:0~14ph,
Range:-2000~+2000mv,
• CS7-Conductivity/TDS/Salinity
• Two-electrode sensor,range:0~20ms/cm
Four-electrode sensor,range:0~200ms/cm
ISE ELECTROCHEMISTRY SERIES SENSORS
• Conductivity sensor
• Contact and ring conductivity sensors, ring sensors to measure the acid-
base concentration;
• High temperature/high pressure sensor
DG7-FC0 FREE CHLORINE SENSOR
• Resolution:0.01ppm
Spare Parts Film cap M48.1G Film cap M48.1 Film cap M20 Film cap M20
Electrolyte Electrolyte Electrolyte Electrolyte
ECS2.1/GEL ECP1.3/GEL ECD4/W EOZ1
• ± 0.04m/s flow
• Accuracy ±1% (0.3 m/s to 10 m/s) ,±2% (0.1 m/s to 0.3 m/s)
Municipal Sewage Application
Fluorescent: oxygen
Highalarm
installation
diagram
COMPACT ULTRASONIC LEVEL GAUGE
• Compact design
• Measure the instantaneous flow (m3/h) and volume flow (m3) of water
• Best choice for water and waste water treatment with PTFE/PFA liner for
corrosive medium
• 0.5% accuracy
• The liquid must contain at least 50 ppm solids with a particle size
greater than 30 microns.
• The most commonly used method for measuring the volumetric flow of fluid in non-marked channels
/river/non-full pipes is the velocity area method. That is, the flow rate at the measurement point is
calculated by measuring the flow velocity of the fluid and the cross-sectional area of the current position.
• Sure offers a wide range of measurement solutions. GDC smart transmitters have built-in AVF
velocity/cross-sectional area flow calculation software that can match all 4-20mA analog output sensors
and smart digital sensors with ModBus RTU output. Such as: DV7 ultrasonic flow sensor, RV7 non-
contact microwave flow sensor; both sensors use Doppler shift effect, the degree of frequency shift is
proportional to the fluid flow rate to measure the flow rate of the fluid.
FT1 THERMAL GAS MASS FLOWMETER
FT1 thermal gas mass flow meter uses the principle of thermal diffusion constant temperature
difference.
The meter measures the gas mass flow in standard units without temperature and pressure
compensation and can measure the process gas temperature at the same time. A variety of
measurement units can be selected on-site (scfm, sfpm, nm3/h, etc.). Providing two channels of 4-
20mA , which are instantaneous flow and temperature, flow and pulse output. The optional
display/keyboard module can display instantaneous and cumulative flow, operating time, temperature
and alarm points. It allows the user to set the full scale, pipe area, alarm point, low flow cut-off, pulse
output frequency, delay and so on.
• CERTIFICATE
• CE CERTIFICATE
• EMC 2014/30/EU,RADIATION AND ANTI-INTERFERENCE TEST EN61326-1:2013
• FM & FMC:
• CLASS I, DIV 1, GROUP B, C, D; CLASS II, DIV 1, GROUP E, F, G; AND CLASS III, DIV 1;
T3C, TA=-40~70°C; CLASS I, ZONE 1, AEX/EX D IIB + H2 T4; TA=-20~70°C; TYPE 4, IP67
• ATEX
• II 2 G EX D IIB + H2 T4; GB TA=-20~70°C; IP67
• II 2 D EX TB IIIC T135°C; DB TA=-20~75°C; IP67
• IECEX:
• EX D IIB + H2 T4; GB TA=-20~70°C; IP67
• EX TB IIIC T135°C; DB TA=-20~75°C; IP67
SDM4000 SLUDGE CONCENTRATION METER
The ultrasonic wave from the sensor on one side of the
pipe passes through the sludge in the pipe, and the
ultrasonic wave on the other side attenuates the
amplitude. The degree of attenuation depends on the
concentration of the sludge in the pipe. It is mainly used to
measure the concentration of return sludge and
concentrated sludge.
Output sludge concentration percentage, g/l or mg/l, site
selection.
Wide LCD display with signal strength.
Range can be expanded up to 400g/l.
CSM5000SLUDGE INTERFACE INSTRUMENT
The sensor is located below the water surface, usually 5-10cm.
Ultrasonic energy is emitted from the surface of the probe to the
underside of the sedimentation tank. The ultrasonic wave is
reflected by the solid suspended matter in the water to form a
continuous echo and is accepted by the sensor. Special analysis
software analyzes the echo data and calculates the mud level
according to the speed of sound and the user's preset settings.
Why measure the mud level?
• CODcr/CODmn:Potassium Dichromate/Potassium
Permanganate Method,
• Formic acid, acetic acid, propionic acid, butyric acid, valeric acid,
isovaleric acid and other volatile fatty acids belong to the volatile
fatty acid VFA. Hydrolysis and acidification in wastewater
treatment plants, biological anaerobic digestion, sludge digestion
and other treatment occasions will produce VFA.