Professional Documents
Culture Documents
NOIM
EDUCATION:
1997 – B.Sc. in Civil Engineer, Bangladesh University of Engineering and Technology (BUET)
Dhaka, Bangladesh
TRAINING:
07 weeks course on AutoCAD, December, 1997
03 days training program on Civil CAD, February 2000
02 weeks training program on MathCAD, October 2000
04 days live demonstration and training program on STAADPro2001 and AutoCIVIL2000 organized
by Research Engineer Inc, August 2001
01 day course on “Repair And Strengthening of Deteriorated Concrete Structures”
01 day training course on “Project Management, Project Scheduling and Closeout using Primavera”
01 day training course on “Construction and Project Management”
04 days training on “ Earthquake Resistant Design and Retrofitting of Buildings” at DCE, BUET in
association with Earthquake Engineering Research Institute, USA
01 day short course on “Evaluation of Concrete Structures” at DCE, BUET in association with ICUS,
University of Tokyo, Japan.
01 day training course on “FOUNDAMENTALS OF NON-LINEAR STATIC (PUSHOVER)
ANALYSIS OF BUILDING STRUCTURE”
PROFESSIONAL SKILLS :
1) Analysis and Design of PSC Girder Bridge Up to 750m long and 100m Span
2) Analysis and design of Cut and Cover TUNNEL
3) Bridge structure for Highway Interchanges
4) Analysis and Design of RCC Building Structure Up to 23-Stories
5) Preparation of critical drawings and check working drawing of cad operator
6) Generating conceptual, reference and detailed design
7) Computerize structural modeling and both static/dynamic analysis of bridge, tunnel and
building structures.
8) Preparation of BoQ, specification, bar bending schedule and tender documents
9) Preparation of progress and final report
10) Conducting seminars, training and presentation
11) Familiar with international code of practice: AASHTO LRFD 4TH Edition 2007, BS
5400’ 1990, AS 5100, AS 3600, ACI 318-02, UBC’ 1997
COMPUTER SKILLS :
1) Midas Civil 7.2, SAM-LEAP5, STAADPro2007, ETAB 9.0, SAP2000v10, SAFE 8.0,
ACECOMS GEAR2003 etc
2) AutoCAD2007 (2D, 3D), Adobe Photoshop 7.0, 3D-Studio Max5.1, MathCAD2002i etc
3) MS OfficeXP2003, MS Project2003, Adobe Acrobat Professional 7.0 etc
_______________________________________________________________________
_
Page 1 of 10 11/10/2010
CURRICULUM VITAE OF MD. NOIM
EMPLOYMENT RECORD:
Name of the company : Hyder Consulting Middle East Limited.
Duration at service : From 2ND January2009 to Present.
Designation : Senior Bridge Design Engineer
_______________________________________________________________________
_
Page 2 of 10 11/10/2010
CURRICULUM VITAE OF MD. NOIM
Responsible for the design of Utility and Slip Road Bridge (Multi cell, curve, single span box
girder type super structure and integral abutment) at Interchange 2a
Responsible for supervision of CAD work.
Design of sub structure and foundation
Writing AIP Documents for main bridge, slip road bridge and utility bridges
Project funded by WB (World Bank) and ADB (Asian Development Bank). Total project roads
are divided into two types is PRESERVATION and IMPROVEMENT. Preservation road
alignments are remain same only structures are rehabilitated and some structures are replaced.
Improvement roads are realign, widen, new structures provided and damage structures replaced.
Total road survey has been done. Client is Roads and Highway Department, Bangladesh.
Duties:
Detailed road inventory and process survey data of existing structure.
Geotechnical investigation for designing of foundation.
Detail structural design of 26nos various length new bridges.
Design of new culverts.
Preparation of specification and tender document.
Design of various types of super structure and suitable sub structure over pile foundation.
Preparation of detailed structural drawings
Cost estimation and rate analysis
Preparation of specification and tender document.
northern part of Bangladesh. Project funded by DFID and implemented by FIDIC contract.
Duties:
Detailed road inventory and process survey data of existing structure.
Geotechnical investigation for designing of foundation.
Detail structural design of new bridge and culvert.
Preparation of specification and tender document.
behavior under gravity and lateral loads using various computer package programs.
Design members and elements of foundations and superstructures based on the results of both
computers aided and long - hand analysis. These includes foundation types of footings, rafts,
grids, piles etc and components of super – structures such as columns, shear walls, stairs, beam –
slabs framing, flat – plates, underground and overhead reservoirs, retaining walls, shoring piles,
struts etc.
Associated in the planning and prepared project proposal, estimate and rate analysis, supervise
and monitoring construction site of Shamsul-Al-Amin at Dilkusha , Army Head Quarter at
Banani, Kazi Tower at Fakirapul , Navana Tower at Gulshan.
OTHER WORKS : Some other projects that have been done with own responsibility in
different field of civil engineering for national and international field.
MD. Noim
_______________________________________________________________________
_
Page 10 of 10 11/10/2010