Professional Documents
Culture Documents
Industrial applications
The robust submersible pumps series I Our aggregates are contructed for pumping
are developed for pumping of difficult wastewater, dilution acid or leach, fats and
medium. The pumps are applied for oils. The pumps are characterise by a
numerous purposes in industrial and massive construction with huge thickness of
communal sector, e.g. for hot water, the casing.
sea water, for chemical aggressive or
abrasive medium, landfill leachate, Max. Temperatur of the pumped liquid:
storm and seepage water, wastewater 95° C - pump flood.
with pollution etc.
Motor: 0,75 - 1,4 kW Three-phase or
Pumps of series I could be operating in Single-phase motors in 400 V -3~ and 230 V
vertical and horizontal position. The pumps -1~, 50 Hz or 60 Hz, direct start, 2-pole
are produced in three different materials: (2800 min^-1), oil filled. Delivery of special
voltage is possible.
available materials:
· IG - grey cast Shaft sealing: Double mechanical seal
· IB - cast bronze with in-between located oil chamber.
· IN - high-alloyed stainless steel Pressure connection: G 1 1/4" and 1 1/2”
Therefore the pump can be used in all The pumps are delivered with 5 m cable set -
industrial sectors. They can be used in the without plug - as well as 5 m PTFE- cable
mechanical engineering and in the plant protection tube (model “IN”). Level controls
construction for liquid support and liquid and motor protection plugs are available as
circulation. accessories.
12 IG 0
H [m] 7 + IB
9 IN 7
7
6
3
0
[m³/h] 0 5 10 15 20 25 30
Q
[ l /s] 0 1 2 3 4 5 6 7 8
IG 7 IN 7
IB 7 IN 10