Professional Documents
Culture Documents
S +91-8971195693
Jayashree95@gmail.com
PROFESSIONAL SUMMARY
Dynamic, competent and result oriented professional with 2.5 years of experience in
Embedded Software & Hardware Design and Implementation.
Presently working with Acliv as Embedded Design Engineer.
In depth expertise in various Device Drivers requirement analysis, design, development,
testing, debugging and customer orientation throughout the project lifecycle.
Strong urge and quick learning new concepts & utilizing the same in a productive
manner.
Strong programming background in C.
SKILL PROFILE
Languages C
Operating Systems Windows
Technology Embedded System Designing
CAN,SPI, I2C, Serial EEPROM, Serial ADC, Serial
Drivers
Flash, UART, PWM, RS-485, RS-422, RS-232
IDE / Tools AVR Studio, MP Lab IDE, ICCAVR 7.19
Compiler/Debugger WIN AVR, C18
Controllers ATMEGA 128, AT90CAN 128, PIC18F458, LM629
Analog design, Power Supply design, Signal
Hardware
Conditioning Circuits.
QUALIFICATION
PROJECTS PROFILE
Project 1
Responsibilities
Designed the High Level & Low Level Design documents and Unit Test Case documents.
Responsible for developing and porting the drivers like CAN 2.0A, Serial ADC, PWM, Timers
Testing of Module wise and Unit Wise
Environment
Controllers : PIC24FJ256G110, PIC24F08K101.
Peripherals : Serial ADC, UART, PWM.
Tools : MP Lab IDE, C30 Compiler, ORCAD 9.1, Multisim.
Project 1
Project : Antenna Positioner
Role : Firmware Developer, Hardware Designer
Client : B.E.L
Team Size :2
Duration : 12 months
Description:
The Antenna Positioner (ODU) is used for establishing LOS link between two mobile communication
terminals. The Antenna Positioner is fixed on top of a vehicle mounted 22m telescopic mast. The
Positioner is required to move a 0.6m dia antenna in azimuth and elevation axes, so as to orient
towards another antenna, positioned at a different location. A Positioner Control Unit (IDU), loaded
with a controller software program effects the movement of the Antenna Positioner. The positional
data of the two sites would be the input to the IDU.
Responsibilities:
Designed the High Level & Low Level Design documents and Unit Test Case documents.
Responsible for developing and porting the drivers like Serial EEPROM, Serial ADC, UART,
PWM, timers, RS-232, RS-422
Controlling Motion Controller like LM 629.
Testing of Module wise and Unit Wise
Environment:
Controllers : Atmega 128, LM 629.
Peripherals : Serial EEPROM, Serial ADC, Serial Flash, UART, PWM, RS-485, RS-422, RS-232
Tools : AVR Studio 4.0, WIN AVR, ORCAD 9.1, ICCAVR 7.19.
Project 2
Project 1
Project : Lakshya (PTA)
Role : Testing of Electronic Modules
Client : H.A.L
Team Size :5
Duration : 12 months
Description
LAKSHYA is a pilot less target Aircraft which is an airborne system and it consists of two electronic
modules of Ground Based systems to control from Ground. Airborne electronic modules consists of so
many sensors & encoders to convert air pressure, direction and altitude into digital levels and these
digital levels are sent to the ground system to decode, control and protection of the aircraft
Responsibilities:
Testing & Trouble shooting of All Electronic Modules.
E.S.S of Electronic Modules as per JSS 55555 & MIL STD.
Environment:
Controllers : 8-bit controller, RS-232 communication
Tools : ORCAD 9.1
Project 2
Project : Multi Barrel Rocket Launcher (PINAKA)
Role : Testing of Electronic Modules
Client : A.R.D.E
Team Size :5
Duration : 2 Years
Description
PINAKA is a 12 Barrel rocket launcher. These 12 barrels are arranged in three rows so that each row
consists of 4 barrels. Each barrel consists of 0.8Kg of payload (rocket). Each Launcher consists of
positioners, control systems, sensor systems and encoders.
Responsibilities:
Testing & Trouble shooting of All Electronic Modules.
E.S.S of Electronic Modules as per JSS 55555 & MIL STD.
Environment:
Controllers : 8-bit controller, RS-232 communication, RS-485
Tools : ORCAD 9.1
Project 3
Description
Airbag Control System is CAN based project which is used as a protective device in 4 wheeler
vehicles during accidents. This project consists of 4 pairs IR Sensors and Detectors to emit IR rays for
detection of the obstacle. Each pair is interfaced to a controller at each side of the vehicle. Such 4
pairs are controlled through a CAN bus by a main controller which is interfaced to a Stepper Motor to
open up the air bag and LCD display for indication.
Responsibilities
Designed the High Level & Low Level Design documents and Unit Test Case documents.
Responsible for developing and porting the drivers like CAN 2.0A, Serial ADC, PWM, Timers
Testing of Module wise and Unit Wise
Environment
Controllers : PIC18F458.
Peripherals : CAN 2.0A, Serial ADC, UART, PWM.
Tools : MP Lab IDE, C18 Compiler, ORCAD 9.1.
STRENGTHS
PERSONAL PROFILE