Professional Documents
Culture Documents
HYDRAULIC
CYLINDERS
STANDARD DOUBLE ACTING CYLINDERS ...................................................................2
METAL FILLER PLUG WITH FILTER..............................................................................3
SINGLE ACTING TELESCOPIC CYLINDERS FOR TIPPER..............................................4
1 • HYDRAULIC CYLINDERS
STANDARD DOUBLE ACTING CYLINDERS OEM
PRICING
AVAILABLE
TEST PRESSURE:
300 BAR
MAXIMUM SPEED:
0,5m/Sec.
TEMPERATURE:
-30 deg. C to + 90 deg C
OIL:
HYDRAULIC MINERAL OIL
MATERIALS
ROD:
CK45 Chrome plated f7 Ra<0.2
CHROME THICKNESS:
25 u +- 5u
SELECTION OF CYLINDER
CORROSION TEST: The following cylinders are the Standard "Pin Hole" design of cylinder. Other sizes and designs are available
120Hrs NSS ISO9227 class 9 (ISO4540) on request, just ask our Technical Staff.
Hardness 900HV
EXAMPLE OF HOW TO ORDER
TUBE: MODEL DESIGN ROD STROKE
St 52.3 BK DIN 2393 /C FHC 0 16 OO50
toleranceH9/10. Ra<0.8u
OTHER INFORMATION REQUIRED, RECOMENDATIONS
GLAND: IF BORE OF CYLINDER IS NOT KNOWN, • Protection of the circuit by a relief valve and a filter.
Nitride hardening steel (38MF5) or Cast OPEN AND CLOSED CENTRES AND • Check the oil cleanness (pollution).
Iron G25 IF THERE ARE ANY CONTROL VALVES • To bleed the air from the cylinder and the hydraulic circuit.
ATTACHED TO THE CYLINDER
PISTON:
(See Below). WELDING:
Steel C35R (NSn 28)
• Do not weld on the tube. Dismount the cylinder to weld on
SEALS CYLINDER O.D. the rod or base.
ROD: CLOSED CENTRES - "Z" MEASUREMENT
Compact polyurethane lip seal + 1 OPEN CENTRES - "Z" + DIFFERENCE STORING:
wiper seal WHEN ROD IS FULLY EXTENDED • Storage of extended cylinder, the rod must be greased.
• For high press cleaning, protect the rod.
PISTON: • Cylinders MUST NOT be stored flat, they must be standing
Compact polyurethane seal + nitrile in the upright position.
HYDRAULIC CYLINDERS • 2
OUTER BORE ROD
PART NBR STROKE (mm) Z (mm) E (mm) M (mm) L (mm) L1 (mm) F (mm) NET PRICE
DIA G (mm) DIA A (mm) DIA S (mm)
FHC3300100 100 300 £238.00
FHC3300150 150 350 £244.98
FHC3300200 200 400 £252.02
FHC3300250 250 450 £259.02
FHC3300300 300 500 £266.00
FHC3300350 70 60 30 350 550 3/8" 50 45 50 25.50 £275.24
FHC3300400 400 600 £279.94
FHC3300450 450 650 £286.96
FHC3300500 500 700 £296.26
FHC3300600 600 800 £306.12
FHC3300700 700 900 £318.10
FOR SINGLE PILOT FOR DOUBLE PILOT FOR HOSE BURST FOR FLOW DIVIDERS FOR FLOW CONTROL
(IF TWO OR MORE CYLINDERS ARE REQUIRED TO
OPERATED CHECK VALVES OPERATED CHECK VALVES VALVES ACT AT SAME SPEED) VALVES
SEE PAGE XX SEE PAGE XX SEE PAGE XX SEE PAGE XX SEE PAGE XX
FOR OVERCENTRE FOR SEQUENCE FOR HIGH PRESSURE BALL FOR DIVERTER FOR END STROKE
VALVES VALVES VALVES VALVES VALVES
SEE PAGE XX SEE PAGE XX SEE PAGE XX SEE PAGE XX SEE PAGE XX
3 • HYDRAULIC CYLINDERS
SINGLE ACTING TELESCOPIC CYLINDERS FOR TIPPER OEM
PRICING
AVAILABLE
The study, the conception and the technical specifications are only suitable for Tippers.
MAXIMUM WORKING PRESSURE: MATERIALS MARKING: WELDING:
200 BAR Seamless tube NFA 49311/312 tube On the tube or bottom: REFERENCE • Do not weld on
machined, ground, treated and + CH + WEEK/YEAR of manufacture. the cylinder
TEST PRESSURE:
polished Ra<0.4u
300 BAR TESTING: STORING:
Round Steel Bar C35R, machined,
By "pick up" • Storage of extended cylinder, the
MAXIMUM SPEED: ground and polished Ra<0.4u.
rod must be greased. For high
0,5m/Sec. Each component is nitrated (except RECOMENDATIONS press cleaning, protect the rod.
cylinder bottom). • Protection of the circuit by a relief Cylinders MUST NOT be stored
TEMPERATURE: valve and a filter.
-30 deg. C to + 90 deg C SEALS flat, they must be standing in the
• Check the oil cleanness (pollution). upright position.
ROD:
• To bleed the air from the cylinder
OIL: Compact polyurethane lip seal + 1
and the hydraulic circuit. • The body of Tipper, when fully
HYDRAULIC MINERAL OIL polyurethane wiper seal.
lowered, shall never rest on the
CYLINDER BOTTOM: cylinder (keep a clearance of
'O' Ring 80 shore + back up ring. >20mm)
127/PZ
BRACKETS FOR 306-BZ *
BER 2
BRACKETS FOR 3595 **
HYDRAULIC CYLINDERS • 4