Professional Documents
Culture Documents
info
quocvuong.it@gmail.com
page 1 of 3
Shared by www.ccna4u.info
quocvuong.it@gmail.com
b) Routing protocol: Use EIGRP 3000 routing protocol for the network sections as
described in the topology.
Student3:
a) Configure Inter-VLAN routing
b) Create point-to-point frame-relay subinterface connection. Do not allow traffic
between VLAN red and VLAN default. Other networks can not access VLANs on
SW1&SW2 by ftp.
Student4:
a) PPP multilink, PAP authentication on physical interfaces, require other to sent
username=pppmulti, password=authen.
b) Supply IP addresses for VLAN red, excluding router address, DNS address is
172.168.0.1. Only VLAN blue is not allow to access this router by web
Student5:
a) PPP multilink, PAP authentication on physical interfaces, required to sent
username=pppmulti, password=authen to connect to other router.
b) Supply IP addresses for VLAN blue, excluding router address, DNS address is
172.168.0.1. Only VLAN red is not allow to telnet to router
Student6:
a) VLAN & VTP: Assign names, IPs and passwords for SW1, SW2, SW3. Make
SW1 be the server and SW2 be the client; domain name = ‘color’. VLAN and port
assignment as in the following, apply port security for all ports belong to VLANs
default:
page 2 of 3
Shared by www.ccna4u.info
quocvuong.it@gmail.com
Section 5: Practical theory (35 points, for each student)
Each student will receive a paper sheet with questions, read carefully before you
answer.
– END –
page 3 of 3