Professional Documents
Culture Documents
Part 1
Components
Prepared by:
Ahmed gAmAl el-din el-refAei Ali kishtA
mAhmoud younis mohAmed Ali
2010
Circuit components
Material Cylinders:
The material cylinders contain rubber rams that are connected to the differential
cylinder rods.
One side will push the concrete through the Rock valve while the opposite side will
suck concrete from the hopper.
MPS Valve:
The MPS system consists of three small directional control valves. The main pressure
that is supplied to this directional control valve is supplied by the accumulator.
Boom Pump:
The hydraulic pump for the placing boom is a variable displacement, bent axis, axial
piston pump. It feeds all of the following components:
• The hydraulic cylinders on the boom sections
• The hydraulic cylinders on the outriggers
• The hydraulic motor for the boom slewing gear
• The hydraulic motor for the water pump
• The hydraulic motor of the compressor (optional equipment)
Boom Holding Valves:
Two hydraulically unlockable check valves (H.E.R. valves or holding valves) on each
boom cylinder prevent the boom from coming down unintentionally
Hopper
Outrigger
Vector
The Vector control system is a completely digital control system, which means that the
function movements are converted to numbers (0’s and 1’s). The numbers are sent to
the controller where they are analyzed, converted back to analog (voltage or current),
and sent to the valves and indication devices.