You are on page 1of 5

SECTION 10800

TOILET AND BATH ACCESSORIES

$#

NTS: This specification section requires careful review by the specifier. The specifier
is required to modify the section according to the requirements of the project.
Brackets indicate items to be checked, completed, edited, selected, or filled in.
NTS notations and brackets should be removed in the final printing.
#$

PART 1 -- GENERAL

1.1 THE REQUIREMENT

A. The CONTRACTOR shall furnish and install all listed toilet and bath accessories and
appurtenant work, in accordance with the requirements of the Contract Documents.

1.2 RELATED WORK SPECIFIED ELSEWHERE

A. Section [10160] Metal Toilet Partitions.

B. Section [15410] Plumbing Piping.

C. Section [15430] Piping Specialties.

D. Section [15440] Plumbing Fixtures.

1.3 REFERENCE SPECIFICATIONS, CODES, AND STANDARDS

A. Comply with the reference specifications of the GENERAL REQUIREMENTS.

B. Manufacturer's Standards: The toilet and bath accessories and their installation shall be in
accordance with the manufacturer's published recommendations and specifications.

1.4 CONTRACTOR SUBMITTALS

A. Submittals shall be made in accordance with the GENERAL REQUIREMENTS.

B. Samples: When requested by the ENGINEER, the CONTRACTOR shall submit to the
ENGINEER for review, samples of all the materials and colors proposed for use on the WORK.
The samples shall be clearly marked to show the manufacturer's name and product
identification.

C. Literature: Manufacturer's literature, technical data, and installation instructions on each product
and item being provided shall be submitted.

[10/14/91]
[WASTEWATER MASTER SPECIFICATION] TOILET AND BATH ACCESSORIES
[PROJECT TITLE] 10800-1
1.5 QUALITY ASSURANCE (NOT USED)

1.6 PRODUCT DELIVERY, STORAGE AND HANDLING

A. Delivery of Materials: Manufactured materials shall be delivered in original unbroken packages,


containers, or crating bearing the manufacturer's label with manufacturer's name and product
description.

B. Storage: All materials shall be carefully stored in an area which is protected from the elements
in a manner recommended by the material manufacturer. Storage shall be in a manner that will
prevent damage to the material and its finish.

PART 2 -- PRODUCTS

2.1 ACCESSORIES AND SPECIALTIES

A. General: For the purpose of establishing quality and type, all catalog numbers have been taken
from the Bobrick, Bradley, and Charles Parker catalogs, unless otherwise specified. All items
furnished shall be products of the same manufacturer, wherever possible.

B. Mounting locations shall be where shown, or at manufacturers recommended heights where not
shown, and where determined by the ENGINEER.

C. All exposed exterior finish shall be satin finish stainless steel, except where otherwise specified.

D. Towel, toilet tissue, tissue, and sanitary napkin dispensers [shall] [may] be provided with [key
locks.] [push button latches.]

E. Manufacturers, or Equal:

1. Accessory Specialties, Inc.

2. Bobrick Dispensers, Inc.

3. Bradley

4. Charles Parker Co.

2.2 TOILET ACCESSORIES SCHEDULE

Manufacturer's Numbers

Item Bobrick Bradley Parker

Soap dispenser, surface (powder) B-132 6583 70 SS


Soap dispenser, surface (liquid) B-112 6541 30-L-SS
Soap dispenser, counter (liquid) B-8295 6341 80-L-4P
Soap dispenser, recessed
(powder) B-341 645 40C
Towel dispenser, surface
(sgl fold) B-263 251 T-100-Y
Towel dispenser, surface (C-fold) B-262 250 694
Towel dispenser, recessed
(C-fold) B-359 229 696

Waste receptacle, surface

[10/14/91]
[WASTEWATER MASTER SPECIFICATION] TOILET AND BATH ACCESSORIES
[PROJECT TITLE] 10800-2
(int. cab't.) B-279 357 603 A
Waste receptacle, semi-recessed B-3644 344 656
Waste receptacle, free-standing
(13 gal) B-2260 --- 13 HT

Waste receptacle, free-standing


(21 gal) B-2270 377-36 21 HT

Waste receptacle, undercounter B-269 365 677


Towel disp. & Waste recpt.,
semi-recessed B-3944 234 654

Mirror tilting, 16-in x 30-in B-294 741 3020 (Spcl)


Mirror w/shelf, 24-in x 30-in B-292 705 53020S
Mirror full length, 24-in x 72-in B-290 700 (Spcl) 3020S (Spcl)

Ash urn, surface (rectangular) B-278 973 691


Ash tray, surface B-240 969 19

Robe hook [2 per shower] B-682 9134 681


Coat and hat strip, 36-in w/
4 hooks B-232 9944 681 S
Hooks for linen bag B-211 --- 6275-XZ

Mop rack, 36-inch B-224 9984 688

Pail hook B-220 9971 629

Toilet seat cover disp., surface B-221 5831 607 SMSS


Toilet seat cover disp., B-301 584 607

Toilet paper disp., 2-roll


w/ash tray B-284 5261 2028
DPT-
5x16
Medicine cabinet, recessed B-398 966 689 NWB

Sanitary napkin disp [free] B-352 401 613D


[10 cents], recessed
Sanitary napkin disposal, surface B-270 478 1606
(1)
W/C, Disp./comb. unit, recessed B-34764 5902 ---
(1)
W/C, Disp./comb. unit, H/C part. B-34761 5901 ---
(2-stall)
(1)
W/C, Disp./comb. unit, partition B-3476 590 ---
(2-stall)
(2)
W/C, Disp./comb. unit, recessed B-3574 5912 684W
(2)
W/C, Disp./comb. unit, H/C part. B-3571 5911 684 WP-H
(2-stall)
(2)
W/C, Disp./comb. unit partition B-357 591 684 WP
(2-stall)

Grab bar, straight horiz., or vert., B-550 837-001-2 825-10-CN


[( -inch long)]
Grab bar, 2 - wall wheelchair, B-5637 837-059-2 825-28-CN
(approx. size 40-in x 52-in)

[10/14/91]
[WASTEWATER MASTER SPECIFICATION] TOILET AND BATH ACCESSORIES
[PROJECT TITLE] 10800-3
Grab bar, 2 - wall horiz., shower
(approx. size 24-in x 36-in) B-56167 837-038-2 825-28-CN
Grab bar, 2 - wall horiz. and vert., B-5557 837-036-2 825-19R-CN
(shower, co-ord. RT/LT hand) B-5547 837-037-2 825-19L-CN

Curtain rod, stainless steel, B-204 9531 628 HD-XZ


co-ord size
Shower curtain hooks, stainless 204-1 9536 ---
(number required for curtain)
Shower curtain, vinyl, width 204 9533 ---
per opening
Folding seat, corner, s.s B-508 954 No. 5
Folding seat, for handicapped s.s(3) --- 956-30(L) ---
Folding seat, for handicapped, B-517(L) 9565(L) 1407(L)
plastic(3) B-518(R) 9566(R) 1407(R)
Folding seat, for handicapped, B-5181(L) 9567(L) 14(L) W-T
wood slatted phenolic(3) B-5171(R) 9568(R) 14(R) W-T

NOTES:

1. Each unit shall have seat cover dispensers, ash tray and toilet tissue (roll)
dispensers.

2. Each unit shall have seat cover dispensers, sanitary napkin receptacle and toilet
tissue (roll) dispensers.

3. Contractor to provide the correct hand for seat location on job.

PART 3 -- EXECUTION

3.1 INSTALLATION

A. Mounting locations of toilet accessories shall be where shown or at manufacturer's published


recommendations for height where not shown, and where determined by the ENGINEER.

3.2 LOCATION SCHEDULE

A. The following indicated rooms shall be provided with the listed toilet accessories:

Room [ ], Men's toilet

Towel disp. & waste receptacle, semi-recessed


Mirror w/shelf
Mirror handicapped
Grab bar, 2-wall, wheelchair

Soap dispenser, [powder] [liquid] [counter, liquid]


Toilet seat cover disp. [surface] [recessed]
Toilet paper dispenser, 2-roll w/ash tray
Ash tray, surface [rectangular]
W/C Disp./Comb-unit

Room [ ], Men's lockers

Ash tray, surface [rectangular]


Grab bar in each shower [(Spec type)]

[10/14/91]
[WASTEWATER MASTER SPECIFICATION] TOILET AND BATH ACCESSORIES
[PROJECT TITLE] 10800-4
Mirror full length
Mirror w/shelf
Folding seat, for handicapped, plastic, at each shower
Robe hooks; 2 for each shower
Coat and hat strip, 36-inch long w/4 hooks
Waste receptacle, [(Spec type)]
Curtain rod
Shower curtain hooks
Shower curtain, vinyl

Room [ ], Women's toilet

Towel disp, & waste receptacle, semi-recessed


Mirror w/shelf
Mirror handicapped
Soap dispenser, [powder] [liquid] [counter liquid]
Toilet seat cover dispenser [surface] [recessed]
Toilet paper dispenser, 2-roll w/ash tray
Ash tray, surface [rectangular]
Sanitary napkin dispenser
Sanitary napkin disposal
Grab bar [(Spec type)]
W/C, Disp./Comb-unit

Room [ ], Women's lockers

Ash tray, surface


Grab bar, [(Spec type)] in each shower
Mirror full length
Mirror w/shelf
Folding seat, handicapped, plastic at each shower
Robe hooks, two for each shower
Waste receptacle [(Spec type)]

Rooms [ ], laboratories

Towel dispenser, surface (c-fold)


Waste receptacle [(Spec type)]

Room [ ], Janitor

Soap dispenser, surface (powder)


Towel dispenser, surface (c-fold)
Mop rack, 36-inch
Pail hook, [ ] req'd

B. Each room or area shall be provided with the following toilet accessories:

Room [ ], Meeting/training

Towel dispenser, surface (c-fold)


Waste receptacle [(Spec type)]

******

[10/14/91]
[WASTEWATER MASTER SPECIFICATION] TOILET AND BATH ACCESSORIES
[PROJECT TITLE] 10800-5

You might also like