You are on page 1of 5

PROBLEM SET 5 PROBABLITY

1. The analysis of shafts for a compressor is classified in terms of the machine tool that was used
for manufacturing the shafts and by conformance to specifications, as shown below.

Tool 1
roundness conforms
yes no
surface finish yes 645 10
conforms no 23 19

Tool 2
roundness conforms
yes no
surface finish yes 574 18
conforms no 123 55
(a) If a shaft is selected at random, what is the probability that the shaft conforms to surface
finish requirements or to roundness requirements or is from Tool 1?
(b) If a shaft is selected at random, what is the probability that the shaft conforms to surface
finish requirements or does not conform to roundness requirements or is from Tool 2?
(c) If a shaft is selected at random, what is the probability that the shaft conforms to both the
surface finish and roundness requirements or the shaft is from Tool 1?
(d) If a shaft is selected at random, what is the probability that the shaft conforms to surface
finish requirements or the shaft is from Tool 2?
(e) Given that a shaft selected at random conforms to surface finish requirements, what is the
probability that it is from Tool 1?
(f) Given that a shaft selected at random conforms to surface finish requirements, what is the
probability that it conforms to roundness requirements?
(g) Given that a shaft selected at random does not conform to surface finish requirements, what
is the probability that it is from Tool 1 and does not conform to roundness requirements?

2. A batch of 1000 containers for frozen orange juice contains 13 that are defective. Three containers
are selected at random, without replacement, from the batch.
(a) What is the probability that the third one selected is defective given that the first and the
second one selected were defective?
(b) What is the probability that the third one selected is defective given that the first one
selected was defective and the second one selected was okay?
(c) What is the probability that all the three were defective?

3. A batch of 100 injection-molded parts contains 12 that have suffered excessive shrinkage.
(a) If two parts are selected at random, and without replacement, what is the probability that
the second part selected is one with excessive linkage?
(b) If three parts are selected at random, and without replacement, what is the probability that
the third part selected is one with excessive linkage?
1
2 PROBLEM SET 5 PROBABLITY

4. Each of the following circuits operates only if there is a path of functioning devices from left to
right. The probability that each device functions is shown on the graph. Assume that devices
fail independently. What is the probability that the each of the circuits operates?

a
(b) d
b
e
c
(a)

0.9 0.8 0.7

f
0.95 0.95 m h i
g

Figure 1

5. Customers are used to evaluate preliminary product designs. In the past, 96% of highly successful
products received good reviews, 66% of moderately successful products received good reviews,
and 12% of poor products received good reviews. In addition, 45% of products have been highly
successful, 37% have been moderately successful, and 18% have been poor products.
(a) What is the probability that a product attains a good review?
(b) If a new design attains a good review, what is the probability that it will be a highly
successful product?
(c) If a product does not attain a good review, what is the probability it will be a highly
successful product?

6. An inspector working for a company has a 98% chance of correctly identifying defective items
and a 1% chance of incorrectly classifying a good item as defective. The company has evidence
that its line produces 2% of nonconforming items.
(a) What is the probability that an item selected for inspection is classified as defective?
(b) If an item selected at random is classified as non-defective, what is the probability that it
is indeed good?

7. Let X be a random variable with probability distribution function given by


1 1 1 1 1
f (0) = , f (1) = , f (2) = , . . . f (9) = 10 , f (10) = 10
2 4 8 2 2
(a) Find the mean of X.
(b) Find the variance and standard deviation of X.
(c) What is P (3 ≤ X ≤ 8)?
PROBLEM SET 5 PROBABLITY 3

8. Suppose that X is a discrete uniform random variable on the integers 11 through 20. Determine
the mean, variance and the standard deviation of the random variable Y = 2X − 5 and compare
to those of X.

9. Let X denotes the number of bits received in error in a digital communication channel, and
assume that X is a binomial random variable with p = 0.0014. If 1500 bits are transmitted,
determine the following.
(a) The probability that there is exactly one error received.
(b) The probability that no error is received.
(c) The probability that at least one error is received.
(d) The probability that not more than 3 errors are received.
(e) The mean and variance of X.

10. Because not all airline passengers show up for their reserved seat, an airline sells 325 tickets for
a flight that holds only 320 passengers. The probability that a passenger does not show up is
0.025, and the passengers behave independently.
(a) What is the probability that every passenger who shows up can take the flight?
(b) What is the probability that the flight departs with empty seats?

11. Suppose that the number of customers X that enter a cafe in twenty minutes is a Poisson random
variable, and the probability that no customer enter the cafe in an hour is 0.02.
(a) Find the probability distribution function of X.
(b) Find the mean and variance of the number of customers entering the cafe in twenty minutes
and in an hour.
(c) What is the probability that no customer enter the cafe in twenty minutes?
(d) What is the probability that there will be at least 3 customers entering the cafe in twenty
minutes?

12. The number of flaws in bolts of cloth in textile manufacturing is assumed to be Poisson dis-
tributed with a mean of 0.05 flaw per square meter.
(a) What is the probability that there are at least two flaws in 1 square meter of cloth?
(b) What is the probability that there are no flaw in 5 square meters of cloth?
(c) What is the probability that there are 3 flaws in 15 square meters of cloth?
(d) What is the largest possible area of cloth such that the probability that no flaw is found on
the area is larger than 0.5?

13. Suppose that X is a continuous random variable with probability density function

3 x
f (x) = , 0 ≤ x ≤ 100
2000
(a) Find the cumulative distribution function of X.
(b) Find P (10 ≤ X ≤ 50).
(c) Find the mean, variance and standard deviation of X.

14. Let Z be a standard normal random variable. Find the following probabilities.
(a) P (Z < 1.32) (b) P (Z > 1.32) (c) P (Z < −1.32) (d) P (Z > −1.32)
(e) P (0 < Z < 1.32) (f) P (|Z| < 1.32) (g) P (1 < Z < 3) (h) P (−1 < Z < 3)
4 PROBLEM SET 5 PROBABLITY

15. Let Z be a standard normal random variable. Determine the value of z that satisfies each of the
following.
(a) P (Z < z) = 0.9 (b) P (Z > z) = 0.4 (c) P (Z > z) = 0.6
(d) P (|Z| < z) = 0.8 (e) P (|Z| > z) = 0.05 (f) P (−1.32 < Z < z) = 0.6

16. The compressive strength of samples of cement can be modeled by a normal distribution with
a mean of 7000 kilometers per square centimeter and a standard deviation of 180 kilograms per
square centimeter.
(a) What is the probability that a sample’s strength is less than 7200 kilograms per centimeter?
(b) What is the probability that a sample’s strength is between 6800 and 6900 kilograms per
centimeter?
(c) What is the probability that a sample’s strength is between 6950 and 7050 kilograms per
centimeter?
(d) What strength is exceeded by 98% of the samples?

17. The diameter of the dot produced by a printer is normally distributed with mean diameter 5mm
and standard deviation of 0.2mm.
(a) What is the probability that the diameter of a dot exceeds 5.5mm?
(b) What is the probability that a diameter is between 4.9mm and 5.1mm?
(c) What standard deviation of diameter is needed so that the probability in part (b) is 0.999?

18. The diameter of a shaft in an optical storage drive is normally distributed with mean µcm and
standard deviation 0.001cm. The specifications on the shaft are 0.7 ± 0.003cm. What proportion
of shafts conforms to specification if (a) µ = 0.7015 (b) µ = 0.7?

19. Suppose that X has an exponential distribution with λ = 1.2. Determine the following.
(a) The mean µ and standard deviation σ of X.
(b) P (X < 5) (c) P (X > 5)
(d) P (µ < X < µ + σ) (e) P (µ − σ < X < µ)
(f) P (µ − σ < X < µ + σ)
(g) The value x such that P (µ < X < x) = 0.2
(h) The value x such that P (x < X < µ) = 0.2

20. The time between calls to a plumbing supply business is exponentially distributed with a mean
time between calls of 12 minutes.
(a) What is the probability that there are no calls within a 30-minute interval?
(b) What is the probability that at least one call arrives within a 10-minute interval?
(c) What is the probability that the first call arrives between 10 and 20 minutes after opening?
(d) Determine the length of an interval of time such that the probability of at least one call in
the interval is 0.95.

21. The time between arrival of electronic messages at your computer is exponentially distributed
with a mean of 1.5 hours.
(a) What is the probability that you do not receive a message during a 1.5-hour period?
(b) What is the probability that you do not receive a message during a 4 hour period?
(c) If you had not received a message during the last three hours, What is the probability that
you do not receive a message in the next 3 hours?
(d) What is the expected time between your second and third message?
PROBLEM SET 5 PROBABLITY 5

Answer:
1412 1444 1271 1425 655 1219 19
1. (a) (b) (c) (d) (e) (f) (g)
1467 1467 1467 1467 1247 1247 220
11 12 13 × 12 × 11
2. (a) (b) (c)
998 998 1000 × 999 × 998
12 12
3. (a) (b)
100 100
4. (a) 0.9293
(b) (a + b + c − ab − ac − bc + abc)(d + e − de) + (f + g − f g)hi
−(a + b + c − ab − ac − bc + abc)(d + e − de)(f + g − f g)hi
5. (a) 0.6978 (b) 0.6190 (c) 0.0596
6. (a) 0.0294 (b) 0.9996
7. (a) 0.9990 (b)1.9795 (c) 0.1230
8. X mean = 15.5, variance = 8.25 standard deviation = 2.8723
Y mean = 26, variance = 33 standard deviation = 5.7446
9. (a) 0.2571 (b)0.1223 (c) 0.8777 (d) 0.8388 (e) 2.1, 2.0971
10. (a) 0.9101 (b) 0.8234
λn
11. (a) f (n) = e−λ , λ = 3.9120, n = 0, 1, 2, 3, . . .
n!
(b) In twenty minutes, mean=variance= 1.3040, in an hour, mean=variance= 3.9120
(c) 0.2714 (d) 0.1438
12. (a) 0.0012 (b) 0.7788 (c) 0.0332 (d) 13.8629

 0, x<0

 3/2 r
x 4800 3
13. (a) F (x) = , 0 ≤ x ≤ 100 (b) 0.3219 (c) 60, , 40
 7 7
 1000

1, x > 100
14. (a) 0.9066 (b) 0.0934 (c) 0.0934 (d) 0.9066
(e) 0.4066 (f) 0.8132 (g) 0.1573 (h) 0.8400
15. (a) 1.28 (b) 0.25 (c) − 0.25 (d) 1.28 (e) 1.96 (f) 0.51
16. (a) 0.8665 (b) 0.1542 (c) 0.2205 (d) 6631 kilograms per centimeter
17. (a) 0.0062 (b) 0.3829 (c) 0.0304 mm
18. (a) 0.9332 (b) 0.9973
19. (a) 0.8333 (b) 0.9975 (c) 0.0025 (d) 0.2457
(e) 0.5654 (f) 0.8111 (g) 1.4499 (h) 0.4548
20. (a) 0.0821 (b) 0.5654 (c) 0.2457 (d) 35.9488 minutes
21. (a) 0.3679 (b) 0.0695 (c) 0.1353 (d) 1.5 hours

You might also like