Professional Documents
Culture Documents
FILTERS®
Tel. (+39) 011-9866231 Cap. Sociale 520.000,00€ -S.Statale 23 Km 28.5 Fraz. Viotto – 10060 Scalenghe (TO) e-mail: sales@filters.it
Fax. (+39) 011-9866310 C.C.I.A.A. Torino 738618 -Regione Botteghe, 28 – 10060 Scalenghe
Regione Botteghe, 28 C.F./IVA 05826680018
C.so Vinzaglio, 12 bis
SIX WAY VALVE
FILTERING CARTRIDGES
PERFORMANCE
CUSTOMIZING
TOTAL QUALITY
ENVIRONMENT CARE
2
Duplex Filters
APPLICATION
Filtration of pressurized lube, hydraulic and fuel oil.
Direct installation on pipelines.
Continuos operation due to duplex filter design.
DESIGN
Two filter housings in carbon steel or stainless steel, connected with a 6 way change-over valve unit with
integrated pressure equalisation.
Material as per table at page 8 of this brochure.
Standard and customized construction according to :
Manufacturer standard with certification as per EN 10204 type 3.1.B
ASME VIII div. 1 design, not stamped,
ASME VIII div. 1 design, “U” stamped
CSA B51 / CRN (Canadian Registration Number)
AS 1210 (Australian standard)
PED 97/23 (European Pressure Equipment Directive)
Russian code: GOST + Technical Passport for Russian application
Algerian Authority requirements DPP (passport)
Chinese Regulation for boiler and pressure vessels
Brazilian regulation NR 13 for pressure vessel
FILTER ELEMENTS
Pleated design with optimised pleat density and filtration area.
The filter element is the most important component of the filter for long life and wear protection of the
system.
Oil cleanliness, initial pressure drop and dirt holding capacity are the most important criteria for selection.
For further detailed informations, please refer to our filter elements “Series F” brochures.
ACCESSORIES
On request, our duplex filter can be equipped with a wide range of accessories like differential pressure
indicator, differential pressure transmitter, pressure switch pressure safety valve, etc...
FILTER SELECTION
To select the proper filter for your service refer to next pages.
Pages 4 & 5 tables for filter pressure drop versus flow rate (at different viscosity).
Pages 6 & 7 tables with filter dimensions.
For further questions, please contact us.
3
PERFORMANCE DATA:
Filtration µm
Casing max
Flow Lpm
Item (DN)
1,5
22 205 0,33 205 0,42 205 0,39 205 0,51
12 358 0,40 358 0,50 358 0,46 358 0,60
358
2
22 358 0,38 358 0,46 358 0,43 358 0,54
12 828 0,41 828 0,58 575 0,29 575 0,55
3A
22 900 0,39 900 0,54 815 0,46 815 0,57
12 900 0,39 900 0,53 850 0,46 850 0,63
3B
22 900 0,35 900 0,47 900 0,92 900 0,56
900
5
22 2320 0,36 2320 0,49 2320 0,42 2320 0,58
12 2555 0,34 2555 0,50 1780 0,25 1780 0,41
3500
6A
22 3500 0,45 3500 0,63 2445 0,34 2445 0,50
12 3500 0,43 3500 0,59 2795 0,37 2795 0,54
3500
6B
22 3500 0,39 3500 0,52 3500 0,46 3500 0,62
12 3840 0,28 3840 0,44 2670 0,23 2670 0,37
6780
8
22 5280 0,32 5280 0,47 3670 0,28 3670 0,44
4
Z
PERFORMANCE DATA:
FLOW RATE @ PRESSURE DROP / VISCOSITY
Filtration µm
Casing max
Flow Lpm
Item (DN)
1,5
22 160 0,34 160 0,53 107 0,24 107 0,42
12 265 0,39 265 0,59 176 0,12 176 0,42
358
2
22 358 0,56 358 0,78 250 0,36 250 0,58
12 265 0,19 265 0,35 176 0,15 176 0,33
3A
22 375 0,23 375 0,39 250 0,17 250 0,34
12 390 0,23 390 0,39 260 0,18 260 0,34
3B
22 540 0,31 540 0,49 360 0,21 360 0,40
900
5
22 1125 0,24 1125 0,40 750 0,18 750 0,36
12 818 0,18 818 0,34 545 0,15 545 0,32
3500
6A
22 1125 0,20 1125 0,36 750 0,16 750 0,34
12 1285 0,20 1285 0,36 858 0,16 858 0,34
3500
6B
22 1800 0,26 1800 0,43 1200 0,18 1200 0,36
12 1225 0,17 1225 0,32 815 0,14 815 0,31
6780
8
22 1690 0,19 1690 0,34 1125 0,15 1125 0,32
ITEMS
1A 1B 1C 1,5 2 3A 3B 3C 3D 4A 4B 5 6A 6B 8
LP HP LP HP HP LP HP LP LP LP LP LP LP LP LP LP LP LP
Pressure, Barg 14 65 14 65 100 14 65 14 14 14 14 14 14 14 14 14 14 14
Temperature, °C 100 175 100 175 100 100 175 100 100 100 100 100 100 100 100 100 100 100
LP = Low Pressure version HP = High Pressure version
5
Table A.1 –Connections, volumes & weights
CONNECTIONS Internal
Weight, kg
Flanged Vent & oil
Item Code Fig. Screwed PDI
IN / OUT version Drain volume
version NPT-F Screwed Flanged
NPT-F (lt)
1A HP A.1 1” NPT-F N/A 20 N/A
ADNHFX ½” ¼” 2
1A LP A.2 1” N/A SAE 3000PSI N/A 23
1B HP A.1 1” NPT-F N/A 27 N/A
ADNHF1 ½” ¼ 5
1B LP A.2 1” N/A SAE 3000PSI N/A 30
1C ADNHHF1 A.1 1” NPT-F N/A ½” ¼ 6 28 N/A
1,5 HP A.1 1,5” NPT-F N/A 37 N/A
ADNHF2 ½” ¼ 9
1,5 LP A.1 1,5” N/A SAE 3000PSI N/A 41
2 ADN2HF2 A.2 2” N/A SAE 3000PSI ½” ¼ 9 N/A 50
6
Table A.3 –Connections, volumes & weights
Connections (11) (12) Internal oil Weight
Item Mfr. code Figure Vent Drain PDI
IN / OUT Volume (lt.) (kg)
NPT-F NPT-F NPT-F
3A D6PH31F3……A A.5 3”ANSI 150 RF R9 ½” ¾” ¼” 50 220
3B D6PH31F3……B A.5 3”ANSI 150 RF R9 ½” ¾” ¼” 65 255
3C D6PH31F3……C A.5 3”ANSI 150 RF R9 ½” ¾” ¼” 85 270
3D D6PH32F3…… A.5 3”ANSI 150 RF R9 ½” ¾” ¼” 170 450
4A D6PH41F5……A A.5 4”ANSI 150 RF R9 ½” ¾” ¼” 85 325
4B D6PH43F3…… A.5 4”ANSI 150 RF R9 ½” ¾” ¼” 340 675
5 D6PH52F5…… A.5 5”ANSI 150 RF R9 ½” ¾” ¼” 200 590
6A D6PH62F5……A A.5 6”ANSI 150 RF R9 ½” ¾” ¼” 200 625
6B D6PH62F5……B A.5 6”ANSI 150 RF R9 ½” ¾” ¼” 260 640
8 D6PH83F5…… A.6 8”ANSI 150 RF R9 ½” ¾” ¼” 400 1050
F o r d im en sio n s s ee n ext p ag e t ab le A .4
7
Table A.4 –Dimensions (mm)
DIMENSIONS
Item
A B C D E ∅F H I L ∅M N O P Q R S
3A 200 210 185 290 670 14 758 913 343 219 430 110 75 270 570 95
3B 200 210 185 290 670 14 983 913 343 219 660 110 75 270 570 95
3C 200 210 185 290 670 14 1308 913 343 219 1000 110 75 270 570 95
3D 200 210 185 380 910 18 1055 1243 533 355 660 120 105 290 710 95
4A 230 230 210 290 700 18 1357 943 343 219 1000 110 75 270 600 105
4B 230 230 210 400 1080 18 1112 1377 597 406 660 130 105 290 780 105
5 285 255 260 380 1040 18 1210 1293 533 355 660 120 105 290 800 153
6A 285 255 260 380 1040 18 1210 1373 533 355 660 120 105 290 800 153
6B 285 255 260 380 1040 18 1530 1373 533 355 1000 120 105 290 800 153
8 400 350 340 400 1260 18 1362 1597 597 406 660 130 105 290 1000 155
8
z
Part 1st: The first letters indicate the filter family; for detail to see table 1 at page 3
Part 2nd: These one digits indicate the filter cartridge material as per the following table:
CASING CARTRIDGE
CODE
Vessel & valve body O-Ring End caps & Center tube O-Ring
0 Killed Carbon steel (1) NBR (Buna)
Galvanized CS
1 Stainless steel AISI 316L (2) NBR (Buna) NBR (Buna)
2 Stainless steel AISI 316L (2) NBR (Buna) AISI 316
3 Killed Carbon steel (1) FKM (Viton)
Galvanized CS
4 Stainless steel AISI 316L (2) FKM (Viton) FKM (Viton)
5 Stainless steel AISI 316L (2) FKM (Viton) AISI 316
6 Killed Carbon steel (1) NBR (Buna)
Galvanized CS
7 Stainless steel AISI 316L (2) NBR (Buna) FLUORO-SILICONE
8 Stainless steel AISI 316L (2) NBR (Buna) AISI 316
Part 3rd: These one digits indicate the design code and rules:
CODE DESIGN -CONSTRUCTION – CERTIFICATION CODE (last issue applicable)
0 Manufacturer std. with certification as per EN 10204 type 3.1.B
1 ASME VIII div. 1 design, not stamped, with certification per EN 10204 type 3.1.B and WPS/PQR/WQR
2 ASME VIII div. 1 design, “U” stamped (plus Registration Number, if applicable)
3 CSA B51 / CRN (Canadian Registration Number), installation province to be specified in the order
4 AS 1210 (Australian std.)
5 PED 97/23 (European Pressure Equipment Directive) + ASME VIII div. 1 not stamped
6 Russian code: GOST + Technical Passport for Russian application
7 Algerian Authority requirements DPP (passport) + ASME VIII div. 1 not stamped
8 Chinese Regulation for boiler and pressure vessels + ASME VIII div. 1 not stamped
9 Brazilian regulation NR 13 for pressure vessel + ASME VIII div. 1 not stamped
Part 7th: Model differentation: applicable for model d6… (see table 1 at page 3)
9
HEAD OFFICE:
10060 Scalenghe (TO) ITALY
Tel. (+39) 011-9866231
Regione Botteghe, 28
REGISTERED OFFICE:
10121 TORINO
Cap. Sociale 520.000,00€
C.C.I.A.A. Torino 738618
C.so Vinzaglio, 12 bis
PRODUCTION FACILITIES:
Via Circonvallazione, 28 – 10060 BURIASCO (TO)
S.Statale 23 Km 28.5 Fraz. Viotto – 10060 Scalenghe (TO)
Regione Botteghe, 28 – 10060 Scalenghe
C.F./IVA 05826680018
WEB ADDRESS:
URL: http://www.filters.it
e-mail: sales@filters.it
OUR COMMITMENT
TO EXCELLENCE
IS YOUR PATH
TO SUCCESS