Professional Documents
Culture Documents
Contents:
---------
1. File Description
2. Driver Installation for NetWare Server
3. Parameters Description
1. File Description
-------------------
Filename Description
================= =====================================================
README.TXT Presents a summary of the contents for NetWare Server
driver installation.
IPFSRV.LAN Server ODI Driver
This driver complies with NetWare ODI Server driver
SPEC 3.31.
IPFSRV.LDI The driver installation file for Netware 6.x/
Netware 5.x/Netware 4.x.
4.X\NBI.NLM NetWare Server 4.X Bus Interface module.
4.X\MSM.NLM NetWare Server 4.X LAN driver Media Support
Module (MSM).
4.X\ETHERTSM.NLM NetWare Server 4.X LAN driver Topology Specific Module
(TSM) for Ethernet.
3. Parameter Description
------------------------
The following parameters are used in IPFSRV.LAN.
a. SLOT : Specifies which adapter is enabled when multiple adapters
are found in your computer.
Ex: LOAD IPFSRV SLOT=3 FRAME=ETHERNET_802.2
LOAD IPFSRV SLOT=4 FRAME=ETHERNET_II
b. FRAME : Specifies which frame type is used by the driver. Accepted
values are Ethernet_802.2, Ethernet_802.3, Ethernet_II and
Ethernet_SNAP.
Ex: LOAD IPFSRV FRAME=ETHERNET_802.2
LOAD IPFSRV FRAME=ETHERNET_802.3
LOAD IPFSRV FRAME=ETHERNET_II
LOAD IPFSRV FRAME=ETHERNET_SNAP
c. NODE : Use a different address to replace the node address burned
in EEPROM.
Ex: LOAD IPFSRV NODE=004095888888
4. SPEED : Specifies which medium type is used by the driver.
Accepted vaules are AUTOSENSE, 10BASET, 10BASETFD,
100BASETX, 100BASETXFD.
Ex: LOAD IPFSRV AUTOSENSE
5. VLAN : Select VLAN ID. (Decimal Value)
The valid range is 1 to 4095h.
Ex: LOAD IPFSRV VLANId=1