Professional Documents
Culture Documents
PART I
SH: LAYING OF CONDUIT & FIXING ACCESSORIES
BEFORE CONCRETING
Sl. No Qty Specification Unit Rate
100 Supply and laying medium gauge PVC conduit conforming to IS
9537/1983 Part III n roof slab, jointing the pipes with PVC
solvent cement, tying & fixing the conduit firmly with the re-
inforcement etc. as required.
a 20 mm m 34.00
b 25 mm m 42.00
c 32 mm m 62.00
d 40 mm m 96.00
101 Supply and laying heavy gauge PVC conduit conforming to IS
9537/1983 Part III in roof slab, jointing the pipes with PVC
solvent cement, tying & fixing the conduit firmly with the re-
inforcement etc. as required.
a 20 mm m 41.00
b 25 mm m 51.00
c 32 mm m 75.00
d 40 mm m 106.00
102 Supply and fixing the following normal size PVC accessories
conforming to IS 3419/1988 along with the PVC conduits laid in
concrete
a1 20 mm one way terminal junction box E 31.00
a2 20 mm two way through junction box E 32.00
a3 20 mm two way angle junction box E 32.00
a4 20 mm three way tee junction box E 34.00
a5 20 mm four way intersection junction box E 36.00
a6 20 mm two way branch - U junction box E 42.00
a7 20 mm two way branch - Y junction box E 43.00
a8 20 mm two way branch - H junction box E 45.00
a 75 x 75 x 50 mm E 70.00
b 100 x 100 x 50 mm E 81.00
c 100 x 125 x 50 mm E 92.00
d 125 x 150 x 50 mm E 102.00
e 125 x 200 x 50 mm E 121.00
f 125 x 250 x 50 mm E 141.00
g 125 x 300 x 50 mm E 162.00
h 150 x 150 x 50 mm E 127.00
i 150 x 200 x 50 mm E 152.00
j 200 x 250 x 50 mm E 215.00
k 200 x 300 x 50 mm E 245.00
l 250 x 300 x 50 mm E 286.00
m 250 x 375 x 50 mm E 336.00
n 250 x 500 x 50 mm E 427.00
107 Supply and fixing the following sizes of modular type recess
mounting metal box (group - A, without cover) en-route the
conduit as junction boxes
a 1 / 2 module E 43.00
b 3 module E 49.00
c 4 module E 58.00
d 5 module E 62.00
e 6 module E 81.00
f 8 module E 104.00
g 10 module E 109.00
h 12 module E 129.00
l 18 module E 157.00
108 Supply and fixing the following sizes of modular type recess
mounting metal box (group - B, without cover) en-route the
conduit as junction boxes
a 1 / 2 module E 49.00
b 3 module E 54.00
c 4 module E 63.00
d 5 module E 63.00
e 6 module E 91.00
f 8 module E 110.00
g 10 module E 116.00
h 12 module E 162.00
l 18 module E 183.00
109 Supply and fixing the following sizes of phenolic laminated sheet
as front cover to the existing MS boxes.
a 75 x 75 x 3 mm round / square E 18.00
b 100 x 100 x 3 mm E 21.00
c 100 x 125 x 3 mm E 22.00
d 125 x 150 x 3 mm E 29.00
e 125 x 200 x 3 mm E 32.00
f 125 x 250 x 3 mm E 36.00
g 125 x 300 x 3 mm E 39.00
h 150 x 150 x 3 mm E 28.00
i 150 x 200 x 3 mm E 35.00
j 200 x 250 x 3 mm E 46.00
k 200 x 300 x 3 mm E 55.00
l 250 x 300 x 3 mm E 64.00
m 250 x 375 x 6 mm E 136.00
n 250 x 500 x 6 mm E 177.00
110 Supply and drawing the following sizes of GI guide wire in the
existing conduit
a 18 SWG m 1.30
b 16 SWG m 2.00
c 14 SWG m 2.70
d 12 SWG m 4.70
PART II
WIRING POINTS
Wiring points with PVC conduit, MS box & piano type
120 accessories
Supply and wiring points according to IS 732-1989 using rigid
PVC conduit of minimum size 20 mm conforming to IS 9537 part
III 1983 and with suitable size specials conforming to IS 3419-
1988, fixing the conduit using metal saddles spacing not
exceeding 50 cm or concealed suitably and with 1.00 sq mm FR
PVC insulated stranded single core copper conductor cable 650V
grade, and continuous earthing with 1.5 Sq.mm green coloured
FR PVC insulated stranded single core copper conductor cable
650V grade, generally conforming to IS 694-1990 ,required qty
of copper earth socket, brass bolt and nut crimping/ soldering etc
complete with suitable size metal switch boxes with sheet
thickness 1.63mm, 50mm deep, neatly painted with enamel paint,
3mm thick phenolic laminated sheet front cover (6 mm sheets for
boxes of size 375x300 mm and above) fixed with steel screws,
cup washers etc.upto and including 6A piano type SP switches
and making good the surface of wall, colour washing etc.
complete. All the terminations in the switch boards and DB's
shall be tinned and the wires shall be drawn and fixed along the
periphery of the box using suitable ties, tie mounts etc as
required.
Wiring points with PVC conduit, modular box with white front
plate & modular type accessories (Group A)
122 Supply and wiring points according to IS 732-1989 using rigid
PVC conduit of minimum size 20 mm conforming to IS 9537 part
III 1983 and with suitable size specials conforming to IS 3419-
1988, fixing the conduit using metal saddles spacing not
exceeding 50 cm or concealed suitably and with 1.00 sq mm PVC
insulated stranded single core copper conductor cable 650V
grade,and continuous earthing with 1.5 Sq.mm green coloured
FR PVC insulated stranded single core copper conductor cable
650V grade, generally conforming to IS 694-1990 complete with
suitable size modular type metal switch boxes, modular type front
plates (white) etc. up to and including 6 A modular type SP
switches and making good the surface of wall, colour washing
etc. complete. All the terminations in the switch boards and DB's
shall be tinned and the wires shall be drawn and fixed along the
periphery of the box using suitable ties, tie mounts etc as
required. (Group A modular accessories)
E 116.50
202 Conveyance, installation, testing and commissioning of pre-wired
fluorescent fitting of all types complete with all accessories and
fluorescent lamps etc. directly on wall/ ceiling using 2 nos. C/U
shaped brackets made from 20 x 3 mm MS flat, painting the flat
iron bracket and giving connections with required length of
16/0.20mm 3 core copper conductor flex wire conforming to
relevant ISS or extending the original wiring and giving
connection etc. as required.
E 123.00
203 Conveyance, installation, testing and commissioning of pre-wired
fluorescent fitting of all types complete with all accessories and
fluorescent lamps etc. directly on wall using 2 nos. flat iron
brackets made from 25x6mm flat iron, painting the flat iron
bracket and giving connections with required length of
16/0.20mm 3 core copper conductor flex wire conforming to
relevant ISS or extending the original wiring and giving
connection etc. as required.
E 159.00
204 Conveyance, installation, testing and commissioning of pre-wired
fluorescent fitting of all types complete with all accessories and
fluorescent lamps etc. suspended from ceiling using 2 nos steel
chain (16 SWG or nearest available size) of length not exceeding
30 cm properly hooked to steel hooks anchored to the ceiling and
giving connections with required length of 16/0.20mm 3 core
copper conductor flex wire conforming to relevant ISS or
extending the original wiring and giving connection etc. as
required.
E 98.50
205 Conveyance installation testing and commissioning of 600 x 600
mm pre-wired fluorescent fitting of all types complete with all
accessories and fluorescent lamps etc. suspended from ceiling
using 4 nos steel chain (16 SWG or nearest available size) of
length not exceeding 30 cm properly hooked to steel hooks
anchored to the ceiling and giving connections with required
length of 16/0.20mm 3 core copper conductor flex wire
conforming to relevant ISS or extending the original wiring and
giving connection etc. as required.
E 109.00
206 Supplying and providing extra steel chain (16 SWG) 2 x 1.00 m
long with 16/0.20 mm 3 core copper conductor flex wire
conforming to relevant ISS or with the extended original wiring
and giving connection etc. as required.
E 61.50
207 Supplying and providing extra steel chain (16 SWG) 4 x 1.00 m
long with 16/0.20 mm 3 core copper conductor flex wire
conforming to relevant ISS or with the extended original wiring
and giving connection etc. as required.
E 89.00
208 Conveyance, installation, testing and commissioning of pre-wired
fluorescent fittings of all types complete with all accessories and
fluorescent lamps etc. including supplying and fixing ball and
socket arrangements on T.W round block, suspension down rod
of 19 mm dia MS conduit up to 2x30cm length including painting
and wiring the down rod with 16/0.20mm 3 core round copper
conductor flex wire conforming to relevant ISS or extending the
original wiring and giving connections etc. a required.
E 244.00
209 Supplying and providing extra H.G conduit down rod of 19 mm
dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor
flex wire conforming to relevant ISS or with the extended
original wiring and giving connection etc. as required.
m 177.00
210 Conveyance, installation, testing and commissioning of pre-wired
fluorescent fittings of all types complete with all accessories and
fluorescent lamps etc. including supplying and fixing ball and
socket arrangements on T.W round block, suspension down rod
of 16 mm dia MS conduit up to 2x30cm length including painting
and wiring the down rod with 16/0.20mm 3 core round copper
conductor flex wire conforming to relevant ISS or extending the
original wiring and giving connections etc. a required.
E 236.00
211 Supplying and providing extra H.G conduit down rod of 16 mm
dia 2 x 1.00 m long with 16/0.20 mm 3 core copper conductor
flex wire conforming to relevant ISS or with the extended
original wiring and giving connection etc. as required.
m 118.00
212 Conveyance, installation, testing and commissioning of surface
mounting down light fittings of all types directly on ceiling
including giving connections with required length of 16/0.20 mm
3 core round copper conductor flex wire conforming to relevant
ISS or with the extended original wiring etc as required
E 50.00
213 Conveyance, installation, testing and commissioning of recess
mounting down light fittings of all types directly in the existing
opening on the false - ceiling including giving connections with
required length of 16/0.20 mm 3 core round copper conductor
flex wire conforming to relevant ISS or with the extended
original wiring etc as required
E 30.00
214 Conveyance, installation, testing and commissioning of
ornamental type wall light fittings of all types directly on wall
including giving connections with required length of 16/0.20 mm
3 core round copper conductor flex wire conforming to relevant
ISS or with the extended original wiring, making good the
damages, colour washing etc as required
E 45.00
215 Conveyance, installation, testing and commissioning of foot light/
skirt light fittings of all types directly on wall including cutting
necessary holes, giving connections with the extended original
wiring, making good the damages, colour washing etc as required
E 75.00
216 Conveyance, installation, testing and commissioning of post-top
lantern/ outdoor type FTL/ CFL fittings of all types directly on
the existing pipe/ pole and giving connections with the existing
wiring etc as required
E 42.00
217 Conveyance, installation, testing and commissioning of T 5
outdoor light fitting with 4 Nos lamps/ SV/ MH/ CDMT light
fittings with all accessories and lamp etc. of all types directly on
the existing pipe/ pole including giving connections with the
existing wiring etc as required
E 88.50
218 Supply, conveyance and erection of the following sizes of 'B'
class GI pipe in single section for post top lantern fittings of all
types (excluding excavation & concrete base) and painting with
2 coats of synthetic enamel paint over a coat of zinc chromate
primer etc. as required.
a 32 mm dia m 176.00
b 40 mm dia m 210.00
c 50 mm dia m 251.00
219 Supply, fabrication, conveyance and fixing the following sizes of
B class GI pipe bent to shape / cut and welded to shape and
fixing the same to wall / parapet using clamps as noted along with
each size, painting with 2 coats of synthetic enamel paint over a
coat of zinc chromate primer, making good the damages, colour
washing etc as required (for the installation of outdoor light
fittings).
E 260.00
242 Supplying and fixing cast Aluminium bracket with round base,
nipple with 12.70mm holder threads, projection 130mm stove
enameled with brass bracket holder on suitable size painted MS
box with phenolic laminated sheet front cover and giving
connections with required length of 16/0.20mm PVC insulated
and PVC sheathed 2 core round copper conductor flex wire
conforming to relevant ISS or with the extended original wiring,
earthing the MS box, making good the surface of wall, colour
washing etc as required.
E 269.00
243 Supply and fixing shades of the following types of shades on
existing batten / pendent/bracket fittings as required
a 200mm EI conical shade E 40.00
b 250mm EI conical shade E 45.00
c 200mm polished aluminium shade. E 64.50
d 250mm polished aluminium shade. E 77.50
e 200 mm Plastic sill shade E 24.50
244 Supply and fixing cast aluminium elliptical shaped bulk head
fitting with front clear glass and mesh guard suitable for 5 to 14
W CFL to wall / ceiling including giving connections with
required length of 16/0.20mm PVC insulated and PVC sheathed 3
core round copper conductor flex wire conforming to relevant ISS
or extending the original wiring and making good the surface as
required.
E 419.00
245 Supply and fixing cast aluminium square shaped bulk head fitting
with front clear glass and mesh guard suitable for 5 to 14 W CFL
to wall / ceiling including giving connections with required length
of 16/0.20mm PVC insulated and PVC sheathed 3 core round
copper conductor flex wire conforming to relevant ISS or
extending the original wiring and making good the surface as
required.
E 447.00
246 Supply and fixing cast aluminium stove enameled bulk head
fitting with deep drawn anodised aluminium body, epoxy powder
coated, heat resistant prismatic glass cover suitable for 9 W CFL
to wall / ceiling including giving connections with required length
of 16/0.20mm PVC insulated and PVC sheathed 3 core round
copper conductor flex wire conforming to relevant ISS or
extending the original wiring and making good the surface as
required.
E 779.00
250 Supply and providing the following types and power rated lamps
in the existing fittings as required
a1 Dwarf size 5 W BC / ES / E14 retrofit CFL E 132.00
a2 Dwarf size 8 W BC / ES / E14 retrofit CFL E 139.00
a3 Dwarf size 11 W BC / ES / E14 retrofit CFL E 150.00
a4 Dwarf size 14 W BC / ES / E14 retrofit CFL E 168.00
PART IV
SH: CARRIAGE AND ERECTION OF FAN
300 Supply and installation of suitable size MS rod type fan clamp as
per IS 732 as required. E 92.50
301 Supply and installation of suitable size MS belt type fan clamp
fabricated from MS flat (2 pieces) as per IS 732 as required.
E 140.00
302 Conveyance installation testing and commissioning ceiling fan of
all sizes using standard accessories including resistance type
regulator, wiring the down rod with 16/0.20mm PVC insulated
and PVC sheathed 650/1100V grade 3 core round copper
conductor flex wire or extending the original wiring etc. as
required.
E 91.00
303 Conveyance installation testing and commissioning ceiling fan of
all sizes using standard accessories excluding resistance type
regulator, wiring the down rod with 16/0.20mm PVC insulated
and PVC sheathed 650/1100V grade 3 core round copper
conductor flex wire or extending the original wiring etc. as
required.
E 88.00
304 Conveyance , installation , testing and commissioning of ceiling
fans of all sizes on suitable size HG 300mm long GI/ WI pipe
including cutting, threading, drilling and painting the rod, wiring
the down rod with required length of 16/0.20mm PVC insulated
and PVC sheathed 650/1100V grade 3 core copper conductor
flex wire or with the original wiring extended including supply of
down rod excluding shackle insulator and suspension
arrangements as required.
E 133.00
305 Supply and providing every additional length of down rod of
suitable size heavy gauge GI / WI pipe with 16/0.20mm PVC
insulated and PVC sheathed 3 core round copper conductor flex
wire conforming in relevant ISS or with original wiring extended
including painting as required.
m 91.00
306 Extra for cutting threading and drilling of GI/WI pipe heavy
gauge down rod for ceiling fan etc. as required (for reducing the E 21.00
rod length)
307 Supply, conveyance, installation, testing and commissioning of
ceiling fans of the following sizes using standard accessories
including resistance type regulator, wiring the down rod with
16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3
core round copper conductor flex wire or with extended original
wiring etc. as required.
a1 900 mm sweep (Category A) E 1275.00
b1 1200 mm sweep (Category A) E 1285.00
c1 1400 mm sweep (Category A) E 1370.00
a2 900 mm sweep (Category B) E 1611.00
b2 1200 mm sweep (Category B) E 1656.00
c2 1400 mm sweep (Category B) E 1771.00
308 Supply, conveyance, installation, testing and commissioning of
ceiling fans of the following sizes using standard accessories
excluding resistance type regulator, wiring the down rod with
16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3
core round copper conductor flex wire or with extended original
wiring etc. as required.
a1 900 mm sweep (Category A) E 1217.00
b1 1200 mm sweep (Category A) E 1227.00
c1 1400 mm sweep (Category A) E 1312.00
a2 900 mm sweep (Category B) E 1554.00
b2 1200 mm sweep (Category B) E 1598.00
c2 1200 mm sweep (Category B)- 5 star rated E 1752.00
d2 1400 mm sweep (Category B) E 1713.00
310 Conveyance, installation, testing and commissioning wall
mounting fan of all sizes using mounting brackets supplied along
with the fan and giving connection with existing wire. E 61.00
311 Supply, conveyance, installation, testing and commissioning wall
mounting fan of the following sizes using mounting brackets
supplied along with the fan and giving connection with existing
wire.
E 206.00
315 Supply, conveyance, installation, testing and commissioning of
the following sizes of exhaust fans in the existing opening, fixing
necessary bolt and nuts, making good the damages etc. as
required including giving connections with required length of
24/0.20mm PVC insulated and PVC sheathed 3 core round
copper conductor flex wire conforming to relevant ISS.
a1 150 mm, single phase, light duty exhaust fan in plastic body with
self opening louvers E 1301.00
a2 200 mm, single phase, light duty exhaust fan in plastic body with
self opening louvers E 1414.00
a3 250 mm, single phase, light duty exhaust fan in plastic body with
self opening louvers E 1473.00
a4 225 mm, single phase light duty exhaust fan in metal frame
(Group A) E 1261.00
a5 225 mm, single phase light duty exhaust fan in metal frame
(Group B) E 1561.00
a6 300/ 305 mm, single phase light duty exhaust fan in metal frame
(Group A) E 1333.00
a7 300/ 305 mm, single phase light duty exhaust fan in metal frame
(Group B) E 1672.00
a8 305 mm, single phase, heavy duty, 900 rpm exhaust fan in metal
frame E 2506.00
a9 305 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal
frame E 2506.00
a10 380 mm, single phase, heavy duty, 900 rpm exhaust fan in metal E 2980.00
a11 frame
380 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal E 3024.00
a12 frame
450 mm, single phase, heavy duty, 900 rpm exhaust fan in metal E 3674.00
a13 frame
450 mm, single phase, heavy duty, 1400 rpm exhaust fan in metal E 4042.00
frame PART V
SH: ERECTION OF CALL BELL
320 Supply and fixing the following types of superior quality 250V
A.C call bell on existing M.S. box and giving connections with
required length of 3 core, 16 / 0.20mm 650/1100V grade PVC
insulated and PVC sheathed round copper conductor flex wire
conforming to relevant ISS or with the extended original wiring,
earthing the MS box and making good the surface as required.
a Buzzer E 60.00
b Call bell E 70.00
c Ding Dong bell E 109.00
d Musical bell with bird sound E 140.00
e Musical bell with multiple tunes E 192.00
f DC operated remote controlled bell E 575.00
g Gong bell - 75 mm - without MS box E 519.00
h Gong bell - 100 mm - without MS box E 617.00
i Gong bell - 150 mm - without MS box E 715.00
j Gong bell - 225 mm - without MS box E 1106.00
k Gong bell - 300 mm - without MS box E 1314.00
l Bell indicator Way 197.00
PART VI
SH: SUB MAIN WIRING
330 Supply and fixing the following sizes of PVC Conduit
conforming to IS 9537 / 1983 part III along with all required
accessories on surface including making good the damages etc as
required.
a 10 mm dia m 35.00
a 16 mm dia m 36.00
b 20 mm dia m 40.00
c 25 mm dia m 50.00
d 32 mm dia m 67.00
e 40 mm dia m 80.00
f 50 mm dia m 112.00
334 Supply and fixing the following sizes of heavy duty best quality
16 gauge (1.63 mm) black stove enameled (both inside and
outside) M.S. conduit with inspection type specials conforming to
IS 3837 in surface/ recess using suitable size GI/ painted M.S.
saddles spacing not exceeding 60 cams including making good
the damages colour washing etc. as required.
a 20 mm dia m 135.00
b 25 mm dia m 160.00
c 32 mm dia m 151.00
Supply & drawing copper wires
340 Supply and drawing 650/1100 V grade PVC insulated stranded
single core copper conductor cables conforming to IS 694 part I
1990 in the existing surface / recess conduit as required including
giving necessary connections of the following sizes.
a RG 59 cable m 33.00
b RG 11 cable m 37.00
c RG 6 cable m 60.00
345 Supplying & Drawing unarmored PVC insulated and & PVC
sheathed copper conductor Telephone Pair Cable conforming to
ITD specification for indoor application through the existing
conduit
a 1 Pair m 19.00
b 2 Pair m 25.00
c 3 Pair m 29.00
d 4 Pair m 35.00
e 5 Pair m 40.00
f 6 Pair m 46.00
g 8 Pair m 55.00
h 10 Pair m 64.00
i 20 Pair m 116.00
j 50 Pair m 275.00
PART VII
SH: S& F MS BOXES
350 Supplying and fixing the following sizes of M.S. Boxes made out
of 1.60 mm thick sheet painted grey (both inside and outside ) in
surface/ recess including phenolic laminated sheet covers of
thicknesses noted along with screwed to the box as front cover
with steel screws, cup washers etc. making good the surface,
painting /colour washing etc. as required.
50 mm deep
a1 75 mm x 75 mm x 50 mm with 3 mm sheet E 127.00
a2 100 mm x 100 mm x 50mm with 3 mm sheet E 141.00
a3 100 mm x 125 mm x 50mm with 3 mm sheet E 153.00
a4 125 mm x 150 mm x 50mm with 3 mm sheet E 170.00
a5 125 mm x 200 mm x 50mm with 3 mm sheet E 203.00
a6 125 mm x 250 mm x 50 mm with 3 mm sheet E 227.00
a7 125 mm x 300 mm x 50 mm with 3 mm sheet E 254.00
a8 150 mm x 150 mm x 50 mm with 3 mm sheet E 198.00
a9 150 mm x 200 mm x 50 mm with 3 mm sheet E 237.00
a10 200 mm x 250 mm x 50 mm with 3 mm sheet E 312.00
a11 200 mm x 300 mm x 50 mm with 3 mm sheet E 350.00
a12 250 mm x 300 mm x 50 mm with 3 mm sheet E 400.00
a13 250 mm x 375 mm x 50 mm with 6mm sheet E 527.00
a14 250 mm x 500 mm x 50 mm with 6mm sheet E 659.00
a15 300 mm x 300 mm x 50 mm with 6mm sheet E 511.00
a16 300 mm x 600 mm x 50 mm with 6mm sheet E 882.00
a17 375 mm x 375 mm x 50 mm with 6mm sheet E 706.00
a18 375 mm x 500 mm x 50 mm with 6mm sheet E 902.00
a19 375 mm x 600 mm x 50 mm with 6mm sheet E 1047.00
a20 500 mm x 600 mm x 50 mm with 6mm sheet E 1323.00
75 mm deep
b1 75 mm x 75 mm x 75 mm with 3 mm sheet E 143.00
b2 100 mm x 100 mm x 75mm with 3 mm sheet E 160.00
b3 100 mm x 125 mm x 75mm with 3 mm sheet E 176.00
b4 125 mm x 150 mm x 75mm with 3 mm sheet E 197.00
b5 125 mm x 200 mm x 75mm with 3 mm sheet E 234.00
b6 125 mm x 250 mm x 75 mm with 3 mm sheet E 265.00
b7 125 mm x 300 mm x 75 mm with 3 mm sheet E 297.00
b8 150 mm x 150 mm x 75 mm with 3 mm sheet E 229.00
b9 150 mm x 200 mm x 75 mm with 3 mm sheet E 274.00
b10 200 mm x 250 mm x 75 mm with 3 mm sheet E 360.00
b11 200 mm x 300 mm x 75 mm with 3 mm sheet E 404.00
b12 250 mm x 300 mm x 75 mm with 3 mm sheet E 459.00
b13 250 mm x 375 mm x 75 mm with 6mm sheet E 595.00
b14 250 mm x 500 mm x 75 mm with 6mm sheet E 740.00
b15 300 mm x 300 mm x 75 mm with 6mm sheet E 577.00
b16 300 mm x 600 mm x 75 mm with 6mm sheet E 978.00
b17 375 mm x 375 mm x 75 mm with 6mm sheet E 787.00
b18 375 mm x 500 mm x 75 mm with 6mm sheet E 997.00
b19 375 mm x 600 mm x 75 mm with 6mm sheet E 1152.00
b20 500 mm x 600 mm x 75 mm with 6mm sheet E 1440.00
100 mm deep
c1 75 mm x 75 mm x 100 mm with 3 mm sheet E 158.00
c2 100 mm x 100 mm x 100mm with 3 mm sheet E 181.00
c3 100 mm x 125 mm x 100mm with 3 mm sheet E 199.00
c4 125 mm x 150 mm x 100mm with 3 mm sheet E 223.00
c5 125 mm x 200 mm x 100mm with 3 mm sheet E 267.00
c6 125 mm x 250 mm x 100 mm with 3 mm sheet E 301.00
c7 125 mm x 300 mm x 100 mm with 3 mm sheet E 338.00
c8 150 mm x 150 mm x 100 mm with 3 mm sheet E 261.00
c9 150 mm x 200 mm x 100 mm with 3 mm sheet E 310.00
c10 200 mm x 250 mm x 100 mm with 3 mm sheet E 408.00
c11 200 mm x 300 mm x 100 mm with 3 mm sheet E 461.00
c12 250 mm x 300 mm x 100 mm with 3 mm sheet E 517.00
c13 250 mm x 375 mm x 100 mm with 6mm sheet E 662.00
c14 250 mm x 500 mm x 100 mm with 6mm sheet E 820.00
c15 300 mm x 300 mm x 100 mm with 6mm sheet E 642.00
c16 300 mm x 600 mm x 100 mm with 6mm sheet E 1075.00
c17 375 mm x 375 mm x 100 mm with 6mm sheet E 867.00
c18 375 mm x 500 mm x 100 mm with 6mm sheet E 1094.00
c19 375 mm x 600 mm x 100 mm with 6mm sheet E 1257.00
c20 500 mm x 600 mm x 100 mm with 6mm sheet E 1558.00
PART VIII
SH: S& F PIANO TYPE ACCESSORIES
360 Supplying and fixing the following piano type accessories in the
phenolic laminated front cover of existing MS box including
providing necessary holes and giving connections etc. as
required.
g1 Heavy duty plug and socket unit for flush mounting comprising
of appropriately rated SP MCB, 25 A socket and 25 A plug top
with indicator along with mounting plate E 376.00
g2 Heavy duty plug and socket unit for flush mounting comprising
of appropriately rated SP MCB, 25 A socket and 25 A plug top
with indicator along with mounting plate and plastic mounting
box.
E 415.00
E 277.00
h2 Single phase Motor starter (20 A with current setting of 11A to
18 A for 2 Ton A/C) E 287.00
h3 Single phase Motor starter (25 A with current setting of 16A to
25 A for 2.5 Ton A/C) E 309.00
i1 A/C Power units flush type with suitably rated MCB and suitably
rated motor starter along with 25 A illuminated plug and socket
with front plate etc., suitable for 1.5 TR A/C, 2TR A/C or 2.5 TR
A/C
E 777.00
i2 A/C Power units flush type with suitably rated MCB and suitably
rated motor starter along with 25 A illuminated plug and socket
with front plate etc., suitable for 1.5 TR A/C, 2TR A/C or 2.5 TR
A/C but without MCB
E 528.00
i3 A/C Power units box type with suitably rated MCB and suitably
rated motor starter along with 25 A illuminated plug and socket
with front plate, mounting box etc., for direct fitting to wall
suitable for 1.5 TR A/C, 2TR A/C or 2.5 TR A/C
E 856.00
i4 Complete unit of 20 A Starter unit and 25 A socket with 4 module
plate and surface box for 4 HP motor. E 484.00
i5 Complete unit of 20 A Starter unit and 25 A socket with 4 module
plate and surface box for 4 HP motor but without MCB
E 597.00
m1 Buzzer E 74.00
m2 Electronic buzzer - 1M E 98.00
m3 Electronic buzzer - 2M E 120.00
m4 Bulbul Bell 2 module E 131.00
h1 16A Power unit with 4 module plate, 16A starter, 16A socket and
16 A plug top E 671.00
h2 20A Power unit with 4 module plate, 20A starter, 20A socket and
20 A plug top E 671.00
h3 25A Power unit with 4 module plate, 25A starter, 25A socket and
25 A plug top E 671.00
PART XII
SH: SUPPLY & FIXING MCB DBs & ACCESSORIES
S & F Enclosures for MCB DB
390 Supply and installation of sheet steel, phosphatised and painted,
dust and vermin proof enclosure of MCB DB including copper
/brass bus bar, neutral link, earth bus and DIN rail suitable for
fixing MCB/ isolator etc. fixed on wall using suitable anchor
bolts or fixed in recess including cutting hole on the wall ,
making good the damages, colour washing etc. as required
S & F RCCB
i1 25 A, 2 pole, 30 mA RCCB E 1754.00
i2 40 A, 2 pole, 30 mA RCCB E 1853.00
i3 63 A, 2 pole, 30 mA RCCB E 2282.00
i4 80 A, 2 pole, 30 mA RCCB E 3966.00
i5 100 A, 2 pole, 30 mA RCCB E 4054.00
i6 125 A, 2 pole, 30 mA RCCB E 6485.00
S & F SP MCB
p1 6 A to 32 A, 10 kA, SP MCB (B curve) E 167.00
p2 40 A, 10 kA, SP MCB (B curve) E 328.00
p3 50 A and 63 A, 10 kA, SP MCB (B curve) E 392.00
a1 25 A, 2 pole, 30 mA E 3956.00
a2 40 A, 2 pole, 30 mA E 4145.00
a3 63 A, 2 pole, 30 mA E 42428.00
c1 25 A, 4 pole, 30 mA E 4375.00
c2 40 A, 4 pole, 30 mA E 4534.00
c3 63 A, 4 pole, 30 mA E 4653.00
c4 80 A, 4 pole, 30 mA E
a 50 / 5 A E 1389.00
b 100 / 5 A E 1852.00
d 200 / 5 A E 1915.00
e 300 / 5 A E 1915.00
f 400 / 5 A E 1920.00
g 600 / 5 A E 1920.00
h 800 / 5 A E 2855.00
i 1000 / 5 A E 3228.00
j 1200 / 5 A E 3764.00
S & F voltmeters for mounting on MCB DB
401 Supply and installation of the following types of voltmeters and
selector switches suitable for mounting on MCB DB and giving
connections as required
a 0 - 500 V, AC/ DC - 4 module, analogue type voltmeter E 3179.00
b 0 - 500 V/ 0 - 1200 V AC - 4 module, digital A/M or V/M E 8046.00
c 4 position ammeter selector switch - 3 M E 3325.00
d 5 position volt meter selector switch - 3 M E 3049.00
e 7 position volt meter selector switch - 3 M E 3214.00
S & F MOTOR PROTECTION CIRCUIT BREAKERS (MPCB)
PART XIII
SH: SUPPLY & FIXING ISOLATORS, SDF & COS
410 Supply and installation of switch gear units in sheet steel
enclosure complete with handle assembly, door interlock and pad
locking arrangement of the following ratings on existing angle
iron frame work or directly to wall using necessary bolts & nuts,
fixing the unit to wall, making good the damages, colour washing
etc. including giving necessary connections as required.
(excluding cost of HRC fuse links in case of SDF/ SDFCO)
Kg 95.50
412 Fabrication, supply, conveyance and fixing cable entry/ wire way
box made out 1.60 mm CRCA sheet of suitable size to match the
switch gear and enabling the cables to be connected without
strain, painted with 2 coats of synthetic enamel paint over a coat
of red oxide primer & with drilled holes and mounting to the
switch gear etc as required.
Kg 101.00
413 Fabrication, supply, conveyance and fixing cable entry/ wire way
box made out 1.60 mm CRCA sheet of suitable size to match the
switch gear and enabling the cables to be connected without
strain, powder coated after subjecting to 7 tank process & with
drilled holes and mounting to the switch gear etc as required.
Kg 129.00
PART XIV
SH: CABLING
Laying of power cable in original position with sand cushioning
& protective covering (in ordinary soil)
520 Laying of one number PVC insulated and PVC sheathed
armoured power cable of 1.1KV grade of the following sizes in
ground including excavation of trench of size 35 x 75 cm, sand
cushioning up to a height of 25cm (80+170mm), providing
protective covering with country burnt bricks laid breadth wise,
refilling the trench etc. as required (in ordinary soil).
2 Core cable
a1 2 core cable of size not exceeding 4 sq mm with company
fabricated saddles m 37.00
a2 2 core cable of size exceeding 4 sq mm but not exceeding 16 sq
mm with company fabricated saddles m 40.50
a3 2 core cable of size exceeding 16 sq mm but not exceeding 35 sq
mm with company fabricated saddles m 49.00
a4 2 core cable of size exceeding 35 sq mm but not exceeding 95 sq
mm with company fabricated saddles m 56.00
a5 2 core cable of size exceeding 95 sq mm but not exceeding 185 sq
mm with company fabricated saddles m 66.00
a6 2 core cable of size exceeding 185 sq mm but not exceeding 400
sq mm with clamps fabricated from 25 x 3 mm MS flat m 89.50
3 Core cable
b1 3 core cable of size not exceeding 4 sq mm with company
fabricated saddles m 37.00
b2 3 core cable of size exceeding 4 sq mm but not exceeding 16 sq
mm with company fabricated saddles m 40.50
b3 3 core cable of size exceeding 16 sq mm but not exceeding 35 sq
mm with company fabricated saddles m 49.00
b4 3 core cable of size exceeding 35 sq mm but not exceeding 70 sq
mm with company fabricated saddles m 56.00
b5 3 core cable of size exceeding 70 sq mm but not exceeding 120 sq
mm with company fabricated saddles m 66.00
b6 3 core cable of size exceeding 120 sq mm but not exceeding 400
sq mm with clamps fabricated from 25 x 3 mm MS flat m 89.50
3.5 Core cable
c1 3.5 core cable of size exceeding 16 sq mm but not exceeding 35
sq mm with company fabricated saddles m 49.00
c2 3.5 core cable of size exceeding 25 sq mm but not exceeding 50
sq mm with company fabricated saddles m 56.00
c3 3.5 core cable of size exceeding 50 sq mm but not exceeding 95
sq mm with company fabricated saddles m 66.00
c4 3.5 core cable of size exceeding 95 sq mm but not exceeding 120
sq mm with clamps fabricated from 25 x 3 mm MS flat m 73.00
c5 3.5 core cable of size exceeding 120 sq mm but not exceeding
400 sq mm with clamps fabricated from 25 x 3 mm MS flat
m 89.50
4 Core cable
d1 4 core cable of size not exceeding 6 sq mm with company
fabricated saddles. m 40.50
d2 4 core cable of size exceeding 6 sq mm but not exceeding 25 sq
mm with company fabricated saddles m 49.00
d3 4 core cable of size exceeding 25 sq mm but not exceeding 50 sq
mm with company fabricated saddles m 56.00
d4 4 core cable of size exceeding 50 sq mm but not exceeding 95 sq
mm with company fabricated saddles m 66.00
d5 4 core cable of size exceeding 95 sq mm but not exceeding 120 sq
mm with company fabricated saddles m 73.00
d6 4 core cable of size exceeding 120 sq mm but not exceeding 400
sq mm with clamps fabricated from 25 x 3 mm MS flat m 89.50
Supply & laying Aluminium power cable 1.1 KV grade in
original position with sand cushioning & protective covering in
ordinary soil
535 Supply & laying of one number PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1KV grade of the
following sizes in ground including excavation of trench of size
35 x 75 cm, sand cushioning up to a height of 25cm
(80+170mm), providing protective covering with country burnt
bricks laid breadth wise, refilling the trench etc. as required (in
ordinary soil).
a1 2 core 4 sq mm m 375.00
a2 2 core 6 sq mm m 394.00
a3 2 core 10 sq mm m 402.00
a4 2 core 16 sq mm m 410.00
a5 2 core 25 sq mm m 423.00
a6 2 core 35 sq mm m 463.00
a7 2 core 50 sq mm m 508.00
a8 2 core 70 sq mm m 570.00
a9 2 core 95 sq mm m 629.00
a10 2 core 120 sq mm m 693.00
a11 2 core 150 sq mm m 784.00
a12 2 core 185 sq mm m 889.00
a13 2 core 240 sq mm m 4048.00
a14 2 core 300 sq mm m 1213.00
a15 2 core 400 sq mm m 1437.00
b1 3 core 4 sq mm m 383.00
b2 3 core 6 sq mm m 409.00
b3 3 core 10 sq mm m 420.00
b4 3 core 16 sq mm m 434.00
b5 3 core 25 sq mm m 467.00
b6 3 core 35 sq mm m 526.00
b7 3 core 50 sq mm m 582.00
b8 3 core 70 sq mm m 668.00
b9 3 core 95 sq mm m 752.00
b10 3 core 120 sq mm m 848.00
b11 3 core 150 sq mm m 976.00
b12 3 core 185 sq mm m 1119.00
b13 3 core 240 sq mm m 1356.00
b14 3 core 300 sq mm m 1590.00
b15 3 core 400 sq mm m 1917.00
d1 4 core 4 sq mm m 402.00
d2 4 core 6 sq mm m 422.00
d3 4 core 10 sq mm m 426.00
d4 4 core 16 sq mm m 460.00
d5 4 core 25 sq mm m 510.00
d6 4 core 35 sq mm m 574.00
d7 4 core 50 sq mm m 658.00
d8 4 core 70 sq mm m 770.00
d9 4 core 95 sq mm m 885.00
d10 4 core 120 sq mm m 1012.00
d11 4 core 150 sq mm m 1171.00
d12 4 core 185 sq mm m 1369.00
d13 4 core 240 sq mm m 1675.00
d14 4 core 300 sq mm m 1988.00
d15 4 core 400 sq mm m 2428.00
Supply & laying Aluminium power cable 1.1 KV grade in
additional position with sand cushioning & protective covering
in ordinary soil
536 Supply & laying of one number additional PVC insulated and
PVC sheathed armoured aluminium power cable of 1.1KV grade
of the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
sand cushioning up to height of 25cm, providing protective
covering with country burnt bricks laid breadth wise, refilling the
trench etc. as required (in ordinary soil).
a1 2 core 4 sq mm m 261.00
a2 2 core 6 sq mm m 280.00
a3 2 core 10 sq mm m 288.00
a4 2 core 16 sq mm m 296.00
a5 2 core 25 sq mm m 309.00
a6 2 core 35 sq mm m 344.00
a7 2 core 50 sq mm m 389.00
a8 2 core 70 sq mm m 451.00
a9 2 core 95 sq mm m 509.00
a10 2 core 120 sq mm m 573.00
a11 2 core 150 sq mm m 659.00
a12 2 core 185 sq mm m 764.00
a13 2 core 240 sq mm m 923.00
a13 2 core 300 sq mm m 1088.00
a14 2 core 400 sq mm m 1312.00
b1 3 core 4 sq mm m 269.00
b2 3 core 6 sq mm m 295.00
b3 3 core 10 sq mm m 306.00
b4 3 core 16 sq mm m 320.00
b5 3 core 25 sq mm m 353.00
b6 3 core 35 sq mm m 406.00
b7 3 core 50 sq mm m 463.00
b8 3 core 70 sq mm m 548.00
b9 3 core 95 sq mm m 633.00
b10 3 core 120 sq mm m 729.00
b11 3 core 150 sq mm m 580.00
b12 3 core 185 sq mm m 994.00
b13 3 core 240 sq mm m 1231.00
b14 3 core 300 sq mm m 1465.00
b15 3 core 400 sq mm m 1792.00
d1 4 core 4 sq mm m 289.00
d2 4 core 6 sq mm m 308.00
d3 4 core 10 sq mm m 312.00
d4 4 core 16 sq mm m 346.00
d5 4 core 25 sq mm m 396.00
d6 4 core 35 sq mm m 454.00
d7 4 core 50 sq mm m 538.00
d8 4 core 70 sq mm m 651.00
d9 4 core 95 sq mm m 766.00
d10 4 core 120 sq mm m 893.00
d11 4 core 150 sq mm m 1046.00
d12 4 core 185 sq mm m 1244.00
d13 4 core 240 sq mm m 1550.00
d14 4 core 300 sq mm m 1863.00
d15 4 core 400 sq mm m 2302.00
Supply & laying Aluminium power cable 1.1 KV grade in
original position without sand cushioning & protective covering
in ordinary soil
537 Supply & laying of one number PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1KV grade of the
following sizes in ground including excavation of trench of size
35 x 75 cm, refilling the trench etc. as required but excluding
sand cushioning and protective covering (in ordinary soil).
a1 2 core 4 sq mm m 153.00
a2 2 core 6 sq mm m 172.00
a3 2 core 10 sq mm m 180.00
a4 2 core 16 sq mm m 189.00
a5 2 core 25 sq mm m 201.00
a6 2 core 35 sq mm m 242.00
a7 2 core 50 sq mm m 287.00
a8 2 core 70 sq mm m 349.00
a9 2 core 95 sq mm m 407.00
a10 2 core 120 sq mm m 471.00
a11 2 core 150 sq mm m 563.00
a12 2 core 185 sq mm m 668.00
a13 2 core 240 sq mm m 827.00
a14 2 core 300 sq mm m 992.00
a15 2 core 400 sq mm m 1215.00
b1 3 core 4 sq mm m 161.00
b2 3 core 6 sq mm m 187.00
b3 3 core 10 sq mm m 198.00
b4 3 core 16 sq mm m 212.00
b5 3 core 25 sq mm m 245.00
b6 3 core 35 sq mm m 304.00
b7 3 core 50 sq mm m 360.00
b8 3 core 70 sq mm m 446.00
b9 3 core 95 sq mm m 531.00
b10 3 core 120 sq mm m 627.00
b11 3 core 150 sq mm m 754.00
b12 3 core 185 sq mm m 989.00
b13 3 core 240 sq mm m 1134.00
b14 3 core 300 sq mm m 1369.00
b15 3 core 400 sq mm m 1695.00
d1 4 core 4 sq mm m 181.00
d2 4 core 6 sq mm m 200.00
d3 4 core 10 sq mm m 204.00
d4 4 core 16 sq mm m 238.00
d5 4 core 25 sq mm m 288.00
d6 4 core 35 sq mm m 352.00
d7 4 core 50 sq mm m 436.00
d8 4 core 70 sq mm m 548.00
d9 4 core 95 sq mm m 664.00
d10 4 core 120 sq mm m 791.00
d11 4 core 150 sq mm m 949.00
d12 4 core 185 sq mm m 1231.00
d13 4 core 240 sq mm m 1454.00
d14 4 core 300 sq mm m 1766.00
d15 4 core 400 sq mm m 2206.00
Supply & laying Aluminium power cable 1.1 KV grade in
additional position without sand cushioning & protective
covering in ordinary soil
538 Supply and laying of one number additional PVC insulated and
PVC sheathed armoured aluminium power cable of 1.1KV grade
of the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
refilling the trench etc. as required but excluding sand cushioning
and protective covering (in ordinary soil)
a1 2 core 4 sq mm m 120.00
a2 2 core 6 sq mm m 139.00
a3 2 core 10 sq mm m 147.00
a4 2 core 16 sq mm m 156.00
a5 2 core 25 sq mm m 169.00
a6 2 core 35 sq mm m 203.00
a7 2 core 50 sq mm m 248.00
a8 2 core 70 sq mm m 310.00
a9 2 core 95 sq mm m 368.00
a10 2 core 120 sq mm m 433.00
a11 2 core 150 sq mm m 519.00
a12 2 core 185 sq mm m 624.00
a13 2 core 240 sq mm m 783.00
a14 2 core 300 sq mm m 948.00
a15 2 core 400 sq mm m 1171.00
b1 3 core 4 sq mm m 128.00
b2 3 core 6 sq mm m 154.00
b3 3 core 10 sq mm m 165.00
b4 3 core 16 sq mm m 180.00
b5 3 core 25 sq mm m 212.00
b6 3 core 35 sq mm m 266.00
b7 3 core 50 sq mm m 322.00
b8 3 core 70 sq mm m 408.00
b9 3 core 95 sq mm m 492.00
b10 3 core 120 sq mm m 588.00
b11 3 core 150 sq mm m 710.00
b12 3 core 185 sq mm m 854.00
b13 3 core 240 sq mm m 1090.00
b14 3 core 300 sq mm m 1325.00
b15 3 core 400 sq mm m 1651.00
d1 4 core 4 sq mm m 148.00
d2 4 core 6 sq mm m 168.00
d3 4 core 10 sq mm m 172.00
d4 4 core 16 sq mm m 206.00
d5 4 core 25 sq mm m 255.00
d6 4 core 35 sq mm m 314.00
d7 4 core 50 sq mm m 398.00
d8 4 core 70 sq mm m 510.00
d9 4 core 95 sq mm m 625.00
d10 4 core 120 sq mm m 752.00
d11 4 core 150 sq mm m 905.00
d12 4 core 185 sq mm m 1103.00
d13 4 core 240 sq mm m 1410.00
d14 4 core 300 sq mm m 1722.00
d15 4 core 400 sq mm m 2162.00
Supply & laying Aluminium power cable 1.1 KV grade in
original position with sand cushioning & protective covering in
hard soil
539 Supply & laying of one number PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1KV grade of the
following sizes in ground including excavation of trench of size
35 x 75 cm, sand cushioning up to a height of 25cm
(80+170mm), providing protective covering with country burnt
bricks laid breadth wise, refilling the trench etc. as required (in
hard soil).
a1 2 core 4 sq mm m 396.00
a2 2 core 6 sq mm m 415.00
a3 2 core 10 sq mm m 423.00
a4 2 core 16 sq mm m 431.00
a5 2 core 25 sq mm m 444.00
a6 2 core 35 sq mm m 484.00
a7 2 core 50 sq mm m 529.00
a8 2 core 70 sq mm m 591.00
a9 2 core 95 sq mm m 650.00
a10 2 core 120 sq mm m 714.00
a11 2 core 150 sq mm m 805.00
a12 2 core 185 sq mm m 910.00
a13 2 core 240 sq mm m 1069.00
a14 2 core 300 sq mm m 1234.00
a15 2 core 400 sq mm m 1458.00
b1 3 core 4 sq mm m 404.00
b2 3 core 6 sq mm m 430.00
b3 3 core 10 sq mm m 441.00
b4 3 core 16 sq mm m 455.00
b5 3 core 25 sq mm m 488.00
b6 3 core 35 sq mm m 547.00
b7 3 core 50 sq mm m 603.00
b8 3 core 70 sq mm m 689.00
b9 3 core 95 sq mm m 773.00
b10 3 core 120 sq mm m 869.00
b11 3 core 150 sq mm m 997.00
b12 3 core 185 sq mm m 1140.00
b13 3 core 240 sq mm m 1377.00
b14 3 core 300 sq mm m 1611.00
b15 3 core 400 sq mm m 1938.00
d1 4 core 4 sq mm m 423.00
d2 4 core 6 sq mm m 443.00
d3 4 core 10 sq mm m 447.00
d4 4 core 16 sq mm m 481.00
d5 4 core 25 sq mm m 531.00
d6 4 core 35 sq mm m 595.00
d7 4 core 50 sq mm m 679.00
d8 4 core 70 sq mm m 791.00
d9 4 core 95 sq mm m 906.00
d10 4 core 120 sq mm m 1033.00
d11 4 core 150 sq mm m 1192.00
d12 4 core 185 sq mm m 1390.00
d13 4 core 240 sq mm m 1696.00
d14 4 core 300 sq mm m 2009.00
d15 4 core 400 sq mm m 2449.00
Supply & laying Aluminium power cable 1.1 KV grade in
additional position with sand cushioning & protective covering
in hard soil
540 Supply & laying of one number additional PVC insulated and
PVC sheathed armoured aluminium power cable of 1.1KV grade
of the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
sand cushioning up to height of 25cm, providing protective
covering with country burnt bricks laid breadth wise, refilling the
trench etc. as required (in hard soil).
a1 2 core 4 sq mm m 273.00
a2 2 core 6 sq mm m 292.00
a3 2 core 10 sq mm m 300.00
a4 2 core 16 sq mm m 308.00
a5 2 core 25 sq mm m 321.00
a6 2 core 35 sq mm m 356.00
a7 2 core 50 sq mm m 401.00
a8 2 core 70 sq mm m 463.00
a9 2 core 95 sq mm m 521.00
a10 2 core 120 sq mm m 585.00
a11 2 core 150 sq mm m 671.00
a12 2 core 185 sq mm m 776.00
a13 2 core 240 sq mm m 935.00
a14 2 core 300 sq mm m 1100.00
a15 2 core 400 sq mm m 1324.00
b1 3 core 4 sq mm m 281.00
b2 3 core 6 sq mm m 307.00
b3 3 core 10 sq mm m 318.00
b4 3 core 16 sq mm m 332.00
b5 3 core 25 sq mm m 365.00
b6 3 core 35 sq mm m 418.00
b7 3 core 50 sq mm m 475.00
b8 3 core 70 sq mm m 560.00
b9 3 core 95 sq mm m 645.00
b10 3 core 120 sq mm m 741.00
b11 3 core 150 sq mm m 862.00
b12 3 core 185 sq mm m 1006.00
b13 3 core 240 sq mm m 1243.00
b14 3 core 300 sq mm m 1477.00
b15 3 core 400 sq mm m 1804.00
d1 4 core 4 sq mm m 301.00
d2 4 core 6 sq mm m 320.00
d3 4 core 10 sq mm m 324.00
d4 4 core 16 sq mm m 358.00
d5 4 core 25 sq mm m 408.00
d6 4 core 35 sq mm m 466.00
d7 4 core 50 sq mm m 550.00
d8 4 core 70 sq mm m 663.00
d9 4 core 95 sq mm m 778.00
d10 4 core 120 sq mm m 905.00
d11 4 core 150 sq mm m 1058.00
d12 4 core 185 sq mm m 1256.00
d13 4 core 240 sq mm m 1562.00
d14 4 core 300 sq mm m 1875.00
d15 4 core 400 sq mm m 2314.00
Supply & laying Aluminium power cable 1.1 KV grade in
original position without sand cushioning & protective covering
in hard soil
541 Supply & laying of one number PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1KV grade of the
following sizes in ground including excavation of trench of size
35 x 75 cm, refilling the trench etc. as required but excluding
sand cushioning and protective covering (in hard soil).
a1 2 core 4 sq mm m 174.00
a2 2 core 6 sq mm m 193.00
a3 2 core 10 sq mm m 201.00
a4 2 core 16 sq mm m 210.00
a5 2 core 25 sq mm m 222.00
a6 2 core 35 sq mm m 263.00
a7 2 core 50 sq mm m 308.00
a8 2 core 70 sq mm m 370.00
a9 2 core 95 sq mm m 428.00
a10 2 core 120 sq mm m 492.00
a11 2 core 150 sq mm m 584.00
a12 2 core 185 sq mm m 689.00
a13 2 core 240 sq mm m 848.00
a14 2 core 300 sq mm m 1013.00
a15 2 core 400 sq mm m 1236.00
b1 3 core 4 sq mm m 182.00
b2 3 core 6 sq mm m 208.00
b3 3 core 10 sq mm m 219.00
b4 3 core 16 sq mm m 233.00
b5 3 core 25 sq mm m 266.00
b6 3 core 35 sq mm m 325.00
b7 3 core 50 sq mm m 381.00
b8 3 core 70 sq mm m 467.00
b9 3 core 95 sq mm m 552.00
b10 3 core 120 sq mm m 648.00
b11 3 core 150 sq mm m 775.00
b12 3 core 185 sq mm m 919.00
b13 3 core 240 sq mm m 1155.00
b14 3 core 300 sq mm m 1390.00
b15 3 core 400 sq mm m 1716.00
d1 4 core 4 sq mm m 202.00
d2 4 core 6 sq mm m 221.00
d3 4 core 10 sq mm m 225.00
d4 4 core 16 sq mm m 259.00
d5 4 core 25 sq mm m 309.00
d6 4 core 35 sq mm m 373.00
d7 4 core 50 sq mm m 457.00
d8 4 core 70 sq mm m 569.00
d9 4 core 95 sq mm m 685.00
d10 4 core 120 sq mm m 812.00
d11 4 core 150 sq mm m 970.00
d12 4 core 185 sq mm m 1168.00
d13 4 core 240 sq mm m 1475.00
d14 4 core 300 sq mm m 1787.00
d15 4 core 400 sq mm m 2227.00
Supply & laying Aluminium power cable 1.1 KV grade in
additional position without sand cushioning & protective
covering in hard soil
542 Laying of one number additional PVC insulated and PVC
sheathed armoured aluminium power cable of 1.1KV grade of
the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
refilling the trench etc. as required but excluding sand cushioning
and protective covering (in hard soil)
a1 2 core 4 sq mm m 132.00
a2 2 core 6 sq mm m 151.00
a3 2 core 10 sq mm m 159.00
a4 2 core 16 sq mm m 168.00
a5 2 core 25 sq mm m 181.00
a6 2 core 35 sq mm m 215.00
a7 2 core 50 sq mm m 260.00
a8 2 core 70 sq mm m 322.00
a9 2 core 95 sq mm m 380.00
a10 2 core 120 sq mm m 445.00
a11 2 core 150 sq mm m 531.00
a12 2 core 185 sq mm m 636.00
a13 2 core 240 sq mm m 795.00
a14 2 core 300 sq mm m 960.00
a15 2 core 400 sq mm m 1183.00
b1 3 core 4 sq mm m 140.00
b2 3 core 6 sq mm m 166.00
b3 3 core 10 sq mm m 177.00
b4 3 core 16 sq mm m 192.00
b5 3 core 25 sq mm m 224.00
b6 3 core 35 sq mm m 278.00
b7 3 core 50 sq mm m 334.00
b8 3 core 70 sq mm m 420.00
b9 3 core 95 sq mm m 504.00
b10 3 core 120 sq mm m 600.00
b11 3 core 150 sq mm m 722.00
b12 3 core 185 sq mm m 866.00
b13 3 core 240 sq mm m 1102.00
b14 3 core 300 sq mm m 1337.00
b15 3 core 400 sq mm m 1663.00
c1 3.5 core 25 sq mm m 256.00
c2 3.5 core 35 sq mm m 298.00
c3 3.5 core 50 sq mm m 377.00
c4 3.5 core 70 sq mm m 476.00
c5 3.5 core 95 sq mm m 574.00
c6 3.5 core 120 sq mm m 710.00
c7 3.5 core 150 sq mm m 819.00
c8 3.5 core 185 sq mm m 1001.00
c9 3.5 core 240 sq mm m 1264.00
c10 3.5 core 300 sq mm m 1534.00
c11 3.5 core 400 sq mm m 1914.00
d1 4 core 4 sq mm m 160.00
d2 4 core 6 sq mm m 180.00
d3 4 core 10 sq mm m 184.00
d4 4 core 16 sq mm m 218.00
d5 4 core 25 sq mm m 267.00
d6 4 core 35 sq mm m 326.00
d7 4 core 50 sq mm m 410.00
d8 4 core 70 sq mm m 522.00
d9 4 core 95 sq mm m 637.00
d10 4 core 120 sq mm m 764.00
d11 4 core 150 sq mm m 917.00
d12 4 core 185 sq mm m 1115.00
d13 4 core 240 sq mm m 1422.00
d14 4 core 300 sq mm m 1734.00
d15 4 core 400 sq mm m 2174.00
Supply & laying Aluminium power cable 1.1 KV grade in
original position with sand cushioning & protective covering in
ordinary rocky soil
543 Supply & laying of one number PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1KV grade of the
following sizes in ground including excavation of trench of size
35 x 75 cm, sand cushioning up to a height of 25cm
(80+170mm), providing protective covering with country burnt
bricks laid breadth wise, refilling the trench etc. as required (in
ordinary rocky - soft laterite soil).
a1 2 core 4 sq mm m 436.00
a2 2 core 6 sq mm m 454.00
a3 2 core 10 sq mm m 462.00
a4 2 core 16 sq mm m 471.00
a5 2 core 25 sq mm m 484.00
a6 2 core 35 sq mm m 524.00
a7 2 core 50 sq mm m 569.00
a8 2 core 70 sq mm m 631.00
a9 2 core 95 sq mm m 689.00
a10 2 core 120 sq mm m 753.00
a11 2 core 150 sq mm m 845.00
a12 2 core 185 sq mm m 950.00
a13 2 core 240 sq mm m 1109.00
a14 2 core 300 sq mm m 1274.00
a15 2 core 400 sq mm m 1497.00
b1 3 core 4 sq mm m 443.00
b2 3 core 6 sq mm m 469.00
b3 3 core 10 sq mm m 480.00
b4 3 core 16 sq mm m 495.00
b5 3 core 25 sq mm m 528.00
b6 3 core 35 sq mm m 586.00
b7 3 core 50 sq mm m 643.00
b8 3 core 70 sq mm m 728.00
b9 3 core 95 sq mm m 813.00
b10 3 core 120 sq mm m 909.00
b11 3 core 150 sq mm m 1036.00
b12 3 core 185 sq mm m 1180.00
b13 3 core 240 sq mm m 1416.00
b13 3 core 300 sq mm m 1651.00
b14 3 core 400 sq mm m 1978.00
d1 4 core 4 sq mm m 463.00
d2 4 core 6 sq mm m 483.00
d3 4 core 10 sq mm m 487.00
d4 4 core 16 sq mm m 521.00
d5 4 core 25 sq mm m 571.00
d6 4 core 35 sq mm m 635.00
d7 4 core 50 sq mm m 718.00
d8 4 core 70 sq mm m 831.00
d9 4 core 95 sq mm m 946.00
d10 4 core 120 sq mm m 1073.00
d11 4 core 150 sq mm m 1232.00
d12 4 core 185 sq mm m 1429.00
d13 4 core 240 sq mm m 1736.00
d13 4 core 300 sq mm m 2049.00
d14 4 core 400 sq mm m 2488.00
a1 2 core 4 sq mm m 296.00
a2 2 core 6 sq mm m 314.00
a3 2 core 10 sq mm m 322.00
a4 2 core 16 sq mm m 331.00
a5 2 core 25 sq mm m 344.00
a6 2 core 35 sq mm m 379.00
a7 2 core 50 sq mm m 424.00
a8 2 core 70 sq mm m 486.00
a9 2 core 95 sq mm m 544.00
a10 2 core 120 sq mm m 608.00
a11 2 core 150 sq mm m 694.00
a12 2 core 185 sq mm m 799.00
a13 2 core 240 sq mm m 958.00
a14 2 core 300 sq mm m 1123.00
a15 2 core 400 sq mm m 1346.00
b1 3 core 4 sq mm m 303.00
b2 3 core 6 sq mm m 329.00
b3 3 core 10 sq mm m 341.00
b4 3 core 16 sq mm m 355.00
b5 3 core 25 sq mm m 388.00
b6 3 core 35 sq mm m 441.00
b7 3 core 50 sq mm m 497.00
b8 3 core 70 sq mm m 583.00
b9 3 core 95 sq mm m 667.00
b10 3 core 120 sq mm m 764.00
b11 3 core 150 sq mm m 885.00
b12 3 core 185 sq mm m 1029.00
b13 3 core 240 sq mm m 1265.00
b14 3 core 300 sq mm m 1500.00
b15 3 core 400 sq mm m 1827.00
d1 4 core 4 sq mm m 323.00
d2 4 core 6 sq mm m 343.00
d3 4 core 10 sq mm m 347.00
d4 4 core 16 sq mm m 381.00
d5 4 core 25 sq mm m 431.00
d6 4 core 35 sq mm m 489.00
d7 4 core 50 sq mm m 573.00
d8 4 core 70 sq mm m 685.00
d9 4 core 95 sq mm m 801.00
d10 4 core 120 sq mm m 927.00
d11 4 core 150 sq mm m 1080.00
d12 4 core 185 sq mm m 1278.00
d13 4 core 240 sq mm m 1585.00
d14 4 core 300 sq mm m 1897.00
d15 4 core 400 sq mm m 2337.00
Supply & laying Aluminium power cable 1.1 KV grade in
original position without sand cushioning & protective covering
in ordinary rocky soil
545 Supply & laying of one number PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1KV grade of the
following sizes in ground including excavation of trench of size
35 x 75 cm, refilling the trench etc. as required but excluding
sand cushioning and protective covering (in ordinary rocky - soft
laterite soil).
a1 2 core 4 sq mm m 214.00
a2 2 core 6 sq mm m 233.00
a3 2 core 10 sq mm m 241.00
a4 2 core 16 sq mm m 249.00
a5 2 core 25 sq mm m 262.00
a6 2 core 35 sq mm m 302.00
a7 2 core 50 sq mm m 347.00
a8 2 core 70 sq mm m 410.00
a9 2 core 95 sq mm m 468.00
a10 2 core 120 sq mm m 532.00
a11 2 core 150 sq mm m 623.00
a12 2 core 185 sq mm m 729.00
a13 2 core 240 sq mm m 887.00
a14 2 core 300 sq mm m 1052.00
a15 2 core 400 sq mm m 1276.00
b1 3 core 4 sq mm m 222.00
b2 3 core 6 sq mm m 248.00
b3 3 core 10 sq mm m 259.00
b4 3 core 16 sq mm m 273.00
b5 3 core 25 sq mm m 306.00
b6 3 core 35 sq mm m 365.00
b7 3 core 50 sq mm m 427.00
b8 3 core 70 sq mm m 514.00
b9 3 core 95 sq mm m 601.00
b10 3 core 120 sq mm m 699.00
b11 3 core 150 sq mm m 815.00
b12 3 core 185 sq mm m 959.00
b13 3 core 240 sq mm m 1195.00
b14 3 core 300 sq mm m 1429.00
b15 3 core 400 sq mm m 1756.00
d1 4 core 4 sq mm m 242.00
d2 4 core 6 sq mm m 261.00
d3 4 core 10 sq mm m 265.00
d4 4 core 16 sq mm m 299.00
d5 4 core 25 sq mm m 349.00
d6 4 core 35 sq mm m 413.00
d7 4 core 50 sq mm m 497.00
d8 4 core 70 sq mm m 609.00
d9 4 core 95 sq mm m 724.00
d10 4 core 120 sq mm m 851.00
d11 4 core 150 sq mm m 1010.00
d12 4 core 185 sq mm m 1208.00
d13 4 core 240 sq mm m 1514.00
d14 4 core 300 sq mm m 1827.00
d15 4 core 400 sq mm m 2267.00
Supply & laying Aluminium power cable 1.1 KV grade in
additional position without sand cushioning & protective
covering in ordinary rocky soil
546 Laying of one number additional PVC insulated and PVC
sheathed armoured aluminium power cable of 1.1KV grade of
the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
refilling the trench etc. as required but excluding sand cushioning
and protective covering (in ordinary rocky - soft laterite soil)
a1 2 core 4 sq mm m 155.00
a2 2 core 6 sq mm m 174.00
a3 2 core 10 sq mm m 182.00
a4 2 core 16 sq mm m 190.00
a5 2 core 25 sq mm m 203.00
a6 2 core 35 sq mm m 238.00
a7 2 core 50 sq mm m 283.00
a8 2 core 70 sq mm m 345.00
a9 2 core 95 sq mm m 403.00
a10 2 core 120 sq mm m 467.00
a11 2 core 150 sq mm m 553.00
a12 2 core 185 sq mm m 658.00
a13 2 core 240 sq mm m 817.00
a14 2 core 300 sq mm m 982.00
a15 2 core 400 sq mm m 1206.00
b1 3 core 4 sq mm m 163.00
b2 3 core 6 sq mm m 189.00
b3 3 core 10 sq mm m 200.00
b4 3 core 16 sq mm m 214.00
b5 3 core 25 sq mm m 247.00
b6 3 core 35 sq mm m 300.00
b7 3 core 50 sq mm m 357.00
b8 3 core 70 sq mm m 442.00
b9 3 core 95 sq mm m 527.00
b10 3 core 120 sq mm m 623.00
b11 3 core 150 sq mm m 745.00
b12 3 core 185 sq mm m 888.00
b13 3 core 240 sq mm m 1125.00
b14 3 core 300 sq mm m 1359.00
b15 3 core 400 sq mm m 1686.00
d1 4 core 4 sq mm m 183.00
d2 4 core 6 sq mm m 202.00
d3 4 core 10 sq mm m 206.00
d4 4 core 16 sq mm m 240.00
d5 4 core 25 sq mm m 290.00
d6 4 core 35 sq mm m 349.00
d7 4 core 50 sq mm m 432.00
d8 4 core 70 sq mm m 545.00
d9 4 core 95 sq mm m 660.00
d10 4 core 120 sq mm m 787.00
d11 4 core 150 sq mm m 940.00
d12 4 core 185 sq mm m 1138.00
d13 4 core 240 sq mm m 1444.00
d14 4 core 300 sq mm m 1757.00
d15 4 core 400 sq mm m 2197.00
a1 2 core 4 sq mm m 112.00
a2 2 core 6 sq mm m 131.00
a3 2 core 10 sq mm m 139.00
a4 2 core 16 sq mm m 148.00
a5 2 core 25 sq mm m 160.00
a6 2 core 35 sq mm m 201.00
a7 2 core 50 sq mm m 246.00
a8 2 core 70 sq mm m 308.00
a9 2 core 95 sq mm m 366.00
a10 2 core 120 sq mm m 430.00
a11 2 core 150 sq mm m 510.00
a12 2 core 185 sq mm m 616.00
a13 2 core 240 sq mm m 774.00
a14 2 core 300 sq mm m 939.00
a15 2 core 400 sq mm m 1163.00
b1 3 core 4 sq mm m 120.00
b2 3 core 6 sq mm m 146.00
b3 3 core 10 sq mm m 157.00
b4 3 core 16 sq mm m 171.00
b5 3 core 25 sq mm m 204.00
b6 3 core 35 sq mm m 263.00
b7 3 core 50 sq mm m 319.00
b8 3 core 70 sq mm m 405.00
b9 3 core 95 sq mm m 489.00
b10 3 core 120 sq mm m 586.00
b11 3 core 150 sq mm m 702.00
b12 3 core 185 sq mm m 846.00
b13 3 core 240 sq mm m 1082.00
b14 3 core 300 sq mm m 1316.00
b15 3 core 400 sq mm m 1643.00
d1 4 core 4 sq mm m 140.00
d2 4 core 6 sq mm m 159.00
d3 4 core 10 sq mm m 163.00
d4 4 core 16 sq mm m 197.00
d5 4 core 25 sq mm m 247.00
d6 4 core 35 sq mm m 311.00
d7 4 core 50 sq mm m 395.00
d8 4 core 70 sq mm m 507.00
d9 4 core 95 sq mm m 623.00
d10 4 core 120 sq mm m 749.00
d11 4 core 150 sq mm m 897.00
d12 4 core 185 sq mm m 1095.00
d13 4 core 240 sq mm m 1401.00
d14 4 core 300 sq mm m 1714.00
d15 4 core 400 sq mm m 2154.00
Supply & laying Aluminium power cable 1.1 KV grade in
masonry open duct
548 Supply & laying of one No. PVC insulated and PVC sheathed
armoured aluminium power cable of 1.1 KV grade of the
following sizes in the existing masonry open duct as required.
a1 2 core 4 sq mm m 107.00
a2 2 core 6 sq mm m 125.00
a3 2 core 10 sq mm m 133.00
a4 2 core 16 sq mm m 142.00
a5 2 core 25 sq mm m 155.00
a6 2 core 35 sq mm m 192.00
a7 2 core 50 sq mm m 237.00
a8 2 core 70 sq mm m 299.00
a9 2 core 95 sq mm m 357.00
a10 2 core 120 sq mm m 421.00
a11 2 core 150 sq mm m 502.00
a12 2 core 185 sq mm m 607.00
a13 2 core 240 sq mm m 766.00
a14 2 core 300 sq mm m 931.00
a15 2 core 400 sq mm m 1154.00
b1 3 core 4 sq mm m 114.00
b2 3 core 6 sq mm m 140.00
b3 3 core 10 sq mm m 151.00
b4 3 core 16 sq mm m 166.00
b5 3 core 25 sq mm m 199.00
b6 3 core 35 sq mm m 254.00
b7 3 core 50 sq mm m 311.00
b8 3 core 70 sq mm m 397.00
b9 3 core 95 sq mm m 481.00
b10 3 core 120 sq mm m 577.00
b11 3 core 150 sq mm m 693.00
b12 3 core 185 sq mm m 837.00
b13 3 core 240 sq mm m 1073.00
b14 3 core 300 sq mm m 1308.00
b15 3 core 400 sq mm m 1635.00
d1 4 core 4 sq mm m 134.00
d2 4 core 6 sq mm m 154.00
d3 4 core 10 sq mm m 158.00
d4 4 core 16 sq mm m 192.00
d5 4 core 25 sq mm m 242.00
d6 4 core 35 sq mm m 303.00
d7 4 core 50 sq mm m 387.00
d8 4 core 70 sq mm m 499.00
d9 4 core 95 sq mm m 614.00
d10 4 core 120 sq mm m 741.00
d11 4 core 150 sq mm m 889.00
d12 4 core 185 sq mm m 1086.00
d13 4 core 240 sq mm m 1393.00
d14 4 core 300 sq mm m 1705.00
d15 4 core 400 sq mm m 2145.00
Supply, laying & clamping of Aluminium power cable 1.1 KV
grade
549 Supply, laying and clamping of 1 no. PVC insulated and PVC
sheathed armoured aluminium power cable, 1.1 KV grade of the
following sizes using clamps noted along with the cables, spacing
of clamps not exceeding 60cms, making good the damages ,
colour washing etc. as required.
b1 3 core 4 sq mm m 507.00
b2 3 core 6 sq mm m 582.00
b3 3 core 10 sq mm m 750.00
b4 3 core 16 sq mm m 919.00
b5 3 core 25 sq mm m 1359.00
b6 3 core 35 sq mm m 1753.00
b7 3 core 50 sq mm m 2261.00
b8 3 core 70 sq mm m 3041.00
b9 3 core 95 sq mm m 4103.00
b10 3 core 120 sq mm m 5072.00
b11 3 core 150 sq mm m 6183.00
b12 3 core 185 sq mm m 7611.00
b13 3 core 240 sq mm m 9920.00
b14 3 core 300 sq mm m 12197.00
b15 3 core 400 sq mm m 15598.00
d1 4 core 4 sq mm m 560.00
d2 4 core 6 sq mm m 659.00
d3 4 core 10 sq mm m 855.00
d4 4 core 16 sq mm m 1114.00
d5 4 core 25 sq mm m 1698.00
d6 4 core 35 sq mm m 2217.00
d7 4 core 50 sq mm m 2892.00
d8 4 core 70 sq mm m 3957.00
Supply & laying of copper power cable 1.1 KV grade in
additional position with sand cushioning & protective covering
in ordinary soil
551 Supply & laying of one number additional PVC insulated and
PVC sheathed armoured copper power cable of 1.1KV grade of
the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
sand cushioning up to height of 25cm, providing protective
covering with country burnt bricks laid breadth wise, refilling the
trench etc. as required (in ordinary soil).
a1 2 core 4 sq mm m 346.00
a2 2 core 6 sq mm m 399.00
a3 2 core 10 sq mm m 511.00
a4 2 core 16 sq mm m 637.00
b1 3 core 4 sq mm m 393.00
b2 3 core 6 sq mm m 468.00
b3 3 core 10 sq mm m 636.00
b4 3 core 16 sq mm m 805.00
b5 3 core 25 sq mm m 1245.00
b6 3 core 35 sq mm m 1633.00
b7 3 core 50 sq mm m 2141.00
b8 3 core 70 sq mm m 2921.00
b9 3 core 95 sq mm m 3983.00
b10 3 core 120 sq mm m 4952.00
b11 3 core 150 sq mm m 6058.00
b12 3 core 185 sq mm m 7486.00
b13 3 core 240 sq mm m 9795.00
b13 3 core 300 sq mm m 12072.00
b14 3 core 400 sq mm m 15473.00
a1 2 core 4 sq mm m 238.00
a2 2 core 6 sq mm m 292.00
a3 2 core 10 sq mm m 403.00
a4 2 core 16 sq mm m 530.00
b1 3 core 4 sq mm m 285.00
b2 3 core 6 sq mm m 360.00
b3 3 core 10 sq mm m 528.00
b4 3 core 16 sq mm m 698.00
b5 3 core 25 sq mm m 1137.00
b6 3 core 35 sq mm m 1531.00
b7 3 core 50 sq mm m 2039.00
b8 3 core 70 sq mm m 2819.00
b9 3 core 95 sq mm m 3881.00
b10 3 core 120 sq mm m 4850.00
b11 3 core 150 sq mm m 5961.00
b12 3 core 185 sq mm m 7390.00
b13 3 core 240 sq mm m 9699.00
b14 3 core 300 sq mm m 11975.00
b15 3 core 400 sq mm m 15377.00
d1 4 core 4 sq mm m 339.00
d2 4 core 6 sq mm m 437.00
d3 4 core 10 sq mm m 633.00
d4 4 core 16 sq mm m 892.00
d5 4 core 25 sq mm m 1476.00
d6 4 core 35 sq mm m 1995.00
d7 4 core 50 sq mm m 2670.00
d8 4 core 70 sq mm m 3735.00
Supply & laying of copper power cable 1.1 KV grade in
additional position without sand cushioning & protective
covering in ordinary soil
553 Laying of one number additional PVC insulated and PVC
sheathed armoured copper power cable of 1.1KV grade of the
following sizes in ground in the same trench in one tier horizontal
formation including widening the trench by 20 cm, refilling the
trench etc. as required but excluding sand cushioning and
protective covering (in ordinary soil)
a1 2 core 4 sq mm m 227.00
a2 2 core 6 sq mm m 281.00
a3 2 core 10 sq mm m 392.00
a4 2 core 16 sq mm m 519.00
b1 3 core 4 sq mm m 274.00
b2 3 core 6 sq mm m 350.00
b3 3 core 10 sq mm m 518.00
b4 3 core 16 sq mm m 687.00
b5 3 core 25 sq mm m 1127.00
b6 3 core 35 sq mm m 1521.00
b7 3 core 50 sq mm m 2028.00
b8 3 core 70 sq mm m 2808.00
b9 3 core 95 sq mm m 3870.00
b10 3 core 120 sq mm m 4839.00
b11 3 core 150 sq mm m 5950.00
b12 3 core 185 sq mm m 7379.00
b13 3 core 240 sq mm m 9688.00
b14 3 core 300 sq mm m 11964.00
b15 3 core 400 sq mm m 15366.00
d1 4 core 4 sq mm m 328.00
d2 4 core 6 sq mm m 427.00
d3 4 core 10 sq mm m 623.00
d4 4 core 16 sq mm m 882.00
d5 4 core 25 sq mm m 1466.00
d6 4 core 35 sq mm m 1984.00
d7 4 core 50 sq mm m 2660.00
d8 4 core 70 sq mm m 3724.00
Supply & laying of copper power cable 1.1 KV grade in original
position with sand cushioning & protective covering in hard soil
554 Supply & laying of one number PVC insulated and PVC sheathed
armoured copper power cable of 1.1KV grade of the following
sizes in ground including excavation of trench of size 35 x 75 cm,
sand cushioning up to a height of 25cm (80+170mm), providing
protective covering with country burnt bricks laid breadth wise,
refilling the trench etc. as required (in hard soil).
a1 2 core 4 sq mm m 481.00
a2 2 core 6 sq mm m 534.00
a3 2 core 10 sq mm m 646.00
a4 2 core 16 sq mm m 772.00
b1 3 core 4 sq mm m 528.00
b2 3 core 6 sq mm m 603.00
b3 3 core 10 sq mm m 771.00
b4 3 core 16 sq mm m 940.00
b5 3 core 25 sq mm m 1380.00
b6 3 core 35 sq mm m 1774.00
b7 3 core 50 sq mm m 2282.00
b8 3 core 70 sq mm m 3062.00
b9 3 core 95 sq mm m 4124.00
b10 3 core 120 sq mm m 5093.00
b11 3 core 150 sq mm m 6204.00
b12 3 core 185 sq mm m 7632.00
b13 3 core 240 sq mm m 9941.00
b13 3 core 300 sq mm m 12218.00
b14 3 core 400 sq mm m 15619.00
d1 4 core 4 sq mm m 581.00
d2 4 core 6 sq mm m 680.00
d3 4 core 10 sq mm m 876.00
d4 4 core 16 sq mm m 1135.00
d5 4 core 25 sq mm m 1719.00
d6 4 core 35 sq mm m 2238.00
d7 4 core 50 sq mm m 2913.00
d8 4 core 70 sq mm m 3978.00
Supply & laying of copper power cable 1.1 KV grade in
additional position with sand cushioning & protective covering
in hard soil
555 Supply & laying of one number additional PVC insulated and
PVC sheathed armoured copper power cable of 1.1KV grade of
the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
sand cushioning up to height of 25cm, providing protective
covering with country burnt bricks laid breadth wise, refilling the
trench etc. as required (in hard soil).
a1 2 core 4 sq mm m 358.00
a2 2 core 6 sq mm m 411.00
a3 2 core 10 sq mm m 523.00
a4 2 core 16 sq mm m 649.00
b1 3 core 4 sq mm m 405.00
b2 3 core 6 sq mm m 480.00
b3 3 core 10 sq mm m 648.00
b4 3 core 16 sq mm m 817.00
b5 3 core 25 sq mm m 1257.00
b6 3 core 35 sq mm m 1646.00
b7 3 core 50 sq mm m 2153.00
b8 3 core 70 sq mm m 2933.00
b9 3 core 95 sq mm m 3995.00
b10 3 core 120 sq mm m 4964.00
b11 3 core 150 sq mm m 6070.00
b12 3 core 185 sq mm m 7498.00
b13 3 core 240 sq mm m 9807.00
b14 3 core 300 sq mm m 12084.00
b15 3 core 400 sq mm m 15485.00
d1 4 core 4 sq mm m 458.00
d2 4 core 6 sq mm m 557.00
d3 4 core 10 sq mm m 753.00
d4 4 core 16 sq mm m 1012.00
d5 4 core 25 sq mm m 1596.00
d6 4 core 35 sq mm m 2109.00
d7 4 core 50 sq mm m 2785.00
d8 4 core 70 sq mm m 3849.00
Supply & laying of copper power cable 1.1 KV grade in original
position without sand cushioning & protective covering in hard
soil
556 Supply & laying of one number PVC insulated and PVC sheathed
armoured copper power cable of 1.1KV grade of the following
sizes in ground including excavation of trench of size 35 x 75 cm,
refilling the trench etc. as required but excluding sand cushioning
and protective covering (in hard soil).
a1 2 core 4 sq mm m 259.00
a2 2 core 6 sq mm m 313.00
a3 2 core 10 sq mm m 424.00
a4 2 core 16 sq mm m 551.00
b1 3 core 4 sq mm m 306.00
b2 3 core 6 sq mm m 381.00
b3 3 core 10 sq mm m 549.00
b4 3 core 16 sq mm m 719.00
b5 3 core 25 sq mm m 1159.00
b6 3 core 35 sq mm m 1552.00
b7 3 core 50 sq mm m 2060.00
b8 3 core 70 sq mm m 2840.00
b9 3 core 95 sq mm m 3902.00
b10 3 core 120 sq mm m 4871.00
b11 3 core 150 sq mm m 5982.00
b12 3 core 185 sq mm m 7411.00
b13 3 core 240 sq mm m 9720.00
b13 3 core 300 sq mm m 11996.00
b14 3 core 400 sq mm m 15398.00
d1 4 core 4 sq mm m 360.00
d2 4 core 6 sq mm m 458.00
d3 4 core 10 sq mm m 654.00
d4 4 core 16 sq mm m 913.00
d5 4 core 25 sq mm m 1497.00
d6 4 core 35 sq mm m 2016.00
d7 4 core 50 sq mm m 2691.00
d8 4 core 70 sq mm m 3756.00
Supply & laying of copper power cable 1.1 KV grade in
additional position without sand cushioning & protective
covering in hard soil
557 Laying of one number additional PVC insulated and PVC
sheathed armoured copper power cable of 1.1KV grade of the
following sizes in ground in the same trench in one tier horizontal
formation including widening the trench by 20 cm, refilling the
trench etc. as required but excluding sand cushioning and
protective covering (in hard soil)
a1 2 core 4 sq mm m 239.00
a2 2 core 6 sq mm m 293.00
a3 2 core 10 sq mm m 386.00
a4 2 core 16 sq mm m 531.00
b1 3 core 4 sq mm m 286.00
b2 3 core 6 sq mm m 362.00
b3 3 core 10 sq mm m 530.00
b4 3 core 16 sq mm m 699.00
b5 3 core 25 sq mm m 1139.00
b6 3 core 35 sq mm m 1533.00
b7 3 core 50 sq mm m 2040.00
b8 3 core 70 sq mm m 2821.00
b9 3 core 95 sq mm m 3882.00
b10 3 core 120 sq mm m 4851.00
b11 3 core 150 sq mm m 5962.00
b12 3 core 185 sq mm m 7391.00
b13 3 core 240 sq mm m 9700.00
b14 3 core 300 sq mm m 11976.00
b15 3 core 400 sq mm m 15378.00
d1 4 core 4 sq mm m 340.00
d2 4 core 6 sq mm m 439.00
d3 4 core 10 sq mm m 635.00
d4 4 core 16 sq mm m 894.00
d5 4 core 25 sq mm m 1478.00
d6 4 core 35 sq mm m 1996.00
d7 4 core 50 sq mm m 2672.00
d8 4 core 70 sq mm m 3736.00
Supply & laying of copper power cable 1.1 KV grade in original
position with sand cushioning & protective covering in ordinary
rocky soil
558 Supply & laying of one number PVC insulated and PVC sheathed
armoured copper power cable of 1.1KV grade of the following
sizes in ground including excavation of trench of size 35 x 75 cm,
sand cushioning up to a height of 25cm (80+170mm), providing
protective covering with country burnt bricks laid breadth wise,
refilling the trench etc. as required (in ordinary rocky - soft
laterite soil).
a1 2 core 4 sq mm m 520.00
a2 2 core 6 sq mm m 574.00
a3 2 core 10 sq mm m 686.00
a4 2 core 16 sq mm m 812.00
b1 3 core 4 sq mm m 568.00
b2 3 core 6 sq mm m 643.00
b3 3 core 10 sq mm m 811.00
b4 3 core 16 sq mm m 980.00
b5 3 core 25 sq mm m 1420.00
b6 3 core 35 sq mm m 1814.00
b7 3 core 50 sq mm m 2322.00
b8 3 core 70 sq mm m 3102.00
b9 3 core 95 sq mm m 4164.00
b10 3 core 120 sq mm m 5132.00
b11 3 core 150 sq mm m 6244.00
b12 3 core 185 sq mm m 7672.00
b13 3 core 240 sq mm m 9981.00
b14 3 core 300 sq mm m 12258.00
b15 3 core 400 sq mm m 15659.00
d1 4 core 4 sq mm m 621.00
d2 4 core 6 sq mm m 720.00
d3 4 core 10 sq mm m 916.00
d4 4 core 16 sq mm m 1175.00
d5 4 core 25 sq mm m 1759.00
d6 4 core 35 sq mm m 2277.00
d7 4 core 50 sq mm m 2953.00
d8 4 core 70 sq mm m 4018.00
Supply & laying of copper power cable 1.1 KV grade in
additional position with sand cushioning & protective covering
in ordinary rocky soil
559 Supply & laying of one number additional PVC insulated and
PVC sheathed armoured copper power cable of 1.1KV grade of
the following sizes in ground in the same trench in one tier
horizontal formation including widening the trench by 20 cm,
sand cushioning up to height of 25cm, providing protective
covering with country burnt bricks laid breadth wise, refilling the
trench etc. as required (in ordinary rocky - soft laterite soil).
a1 2 core 4 sq mm m 380.00
a2 2 core 6 sq mm m 434.00
a3 2 core 10 sq mm m 546.00
a4 2 core 16 sq mm m 672.00
b1 3 core 4 sq mm m 428.00
b2 3 core 6 sq mm m 503.00
b3 3 core 10 sq mm m 671.00
b4 3 core 16 sq mm m 840.00
b5 3 core 25 sq mm m 1280.00
b6 3 core 35 sq mm m 1668.00
b7 3 core 50 sq mm m 2176.00
b8 3 core 70 sq mm m 2956.00
b9 3 core 95 sq mm m 4018.00
b10 3 core 120 sq mm m 4987.00
b11 3 core 150 sq mm m 6092.00
b12 3 core 185 sq mm m 7521.00
b13 3 core 240 sq mm m 9830.00
b14 3 core 300 sq mm m 12106.00
b15 3 core 400 sq mm m 15508.00
d1 4 core 4 sq mm m 481.00
d2 4 core 6 sq mm m 580.00
d3 4 core 10 sq mm m 776.00
d4 4 core 16 sq mm m 1035.00
d5 4 core 25 sq mm m 1619.00
d6 4 core 35 sq mm m 2132.00
d7 4 core 50 sq mm m 2807.00
d8 4 core 70 sq mm m 3872.00
Supply & laying of copper power cable 1.1 KV grade in original
position without sand cushioning & protective covering in
ordinary rocky soil
560 Supply & laying of one number PVC insulated and PVC sheathed
armoured copper power cable of 1.1KV grade of the following
sizes in ground including excavation of trench of size 35 x 75 cm,
refilling the trench etc. as required but excluding sand cushioning
and protective covering (in ordinary rocky - soft laterite soil).
a1 2 core 4 sq mm m 299.00
a2 2 core 6 sq mm m 352.00
a3 2 core 10 sq mm m 464.00
a4 2 core 16 sq mm m 590.00
b1 3 core 4 sq mm m 346.00
b2 3 core 6 sq mm m 421.00
b3 3 core 10 sq mm m 589.00
b4 3 core 16 sq mm m 758.00
b5 3 core 25 sq mm m 1198.00
b6 3 core 35 sq mm m 1592.00
b7 3 core 50 sq mm m 2100.00
b8 3 core 70 sq mm m 2880.00
b9 3 core 95 sq mm m 3942.00
b10 3 core 120 sq mm m 4911.00
b11 3 core 150 sq mm m 6022.00
b12 3 core 185 sq mm m 7450.00
b13 3 core 240 sq mm m 9759.00
b13 3 core 300 sq mm m 12036.00
b14 3 core 400 sq mm m 15437.00
d1 4 core 4 sq mm m 399.00
d2 4 core 6 sq mm m 498.00
d3 4 core 10 sq mm m 694.00
d4 4 core 16 sq mm m 953.00
d5 4 core 25 sq mm m 1537.00
d6 4 core 35 sq mm m 2056.00
d7 4 core 50 sq mm m 2731.00
d8 4 core 70 sq mm m 3796.00
Supply & laying of copper power cable 1.1 KV grade in
additional position without sand cushioning & protective
covering in ordinary rocky soil
561 Laying of one number additional PVC insulated and PVC
sheathed armoured copper power cable of 1.1KV grade of the
following sizes in ground in the same trench in one tier horizontal
formation including widening the trench by 20 cm, refilling the
trench etc. as required but excluding sand cushioning and
protective covering (in ordinary rocky - soft laterite soil)
a1 2 core 4 sq mm m 262.00
a2 2 core 6 sq mm m 316.00
a3 2 core 10 sq mm m 427.00
a4 2 core 16 sq mm m 554.00
b1 3 core 4 sq mm m 309.00
b2 3 core 6 sq mm m 384.00
b3 3 core 10 sq mm m 552.00
b4 3 core 16 sq mm m 722.00
b5 3 core 25 sq mm m 1161.00
b6 3 core 35 sq mm m 1555.00
b7 3 core 50 sq mm m 2063.00
b8 3 core 70 sq mm m 2843.00
b9 3 core 95 sq mm m 3905.00
b10 3 core 120 sq mm m 4874.00
b11 3 core 150 sq mm m 5985.00
b12 3 core 185 sq mm m 7414.00
b13 3 core 240 sq mm m 9722.00
b14 3 core 300 sq mm m 11999.00
b15 3 core 400 sq mm m 15400.00
d1 4 core 4 sq mm m 363.00
d2 4 core 6 sq mm m 461.00
d3 4 core 10 sq mm m 657.00
d4 4 core 16 sq mm m 916.00
d5 4 core 25 sq mm m 1500.00
d6 4 core 35 sq mm m 2019.00
d7 4 core 50 sq mm m 2694.00
d8 4 core 70 sq mm m 3759.00
Supply & laying of copper power cable 1.1 KV grade through
existing pipe
562 Supply & laying of one number PVC insulated and PVC sheathed
armoured copper power cable of 1.1KV grade of the following
sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC
pipe as required.
a1 2 core 4 sq mm m 197.00
a2 2 core 6 sq mm m 251.00
a3 2 core 10 sq mm m 362.00
a4 2 core 16 sq mm m 489.00
b1 3 core 4 sq mm m 244.00
b2 3 core 6 sq mm m 319.00
b3 3 core 10 sq mm m 487.00
b4 3 core 16 sq mm m 656.00
b5 3 core 25 sq mm m 1096.00
b6 3 core 35 sq mm m 1490.00
b7 3 core 50 sq mm m 1998.00
b8 3 core 70 sq mm m 2778.00
b9 3 core 95 sq mm m 3840.00
b10 3 core 120 sq mm m 4809.00
b11 3 core 150 sq mm m 5909.00
b12 3 core 185 sq mm m 7337.00
b13 3 core 240 sq mm m 9646.00
b14 3 core 300 sq mm m 11923.00
b15 3 core 400 sq mm m 15324.00
a1 2 core 4 sq mm m 191.00
a2 2 core 6 sq mm m 245.00
a3 2 core 10 sq mm m 356.00
a4 2 core 16 sq mm m 483.00
b1 3 core 4 sq mm m 238.00
b2 3 core 6 sq mm m 314.00
b3 3 core 10 sq mm m 482.00
b4 3 core 16 sq mm m 651.00
b5 3 core 25 sq mm m 1091.00
b6 3 core 35 sq mm m 1482.00
b7 3 core 50 sq mm m 1990.00
b8 3 core 70 sq mm m 2770.00
b9 3 core 95 sq mm m 3832.00
b10 3 core 120 sq mm m 4800.00
b11 3 core 150 sq mm m 5901.00
b12 3 core 185 sq mm m 7329.00
b13 3 core 240 sq mm m 9638.00
b14 3 core 300 sq mm m 11914.00
b15 3 core 400 sq mm m 15316.00
d1 4 core 4 sq mm m 292.00
d2 4 core 6 sq mm m 391.00
d3 4 core 10 sq mm m 587.00
d4 4 core 16 sq mm m 846.00
d5 4 core 25 sq mm m 1430.00
d6 4 core 35 sq mm m 1945.00
d7 4 core 50 sq mm m 2621.00
d8 4 core 70 sq mm m 3686.00
Supply, laying & clamping of copper power cable 1.1 KV grade
564 Supply, laying and clamping of 1 no. PVC insulated and PVC
sheathed armoured copper power cable, 1.1 KV grade of the
following sizes using clamps noted along with the cables, spacing
of clamps not exceeding 60cms, making good the damages ,
colour washing etc. as required.
a1 2 core 4 sq mm m 205.00
a2 2 core 6 sq mm m 260.00
a3 2 core 10 sq mm m 371.00
a4 2 core 16 sq mm m 498.00
b1 3 core 4 sq mm m 252.00
b2 3 core 6 sq mm m 328.00
b3 3 core 10 sq mm m 496.00
b4 3 core 16 sq mm m 665.00
b5 3 core 25 sq mm m 1113.00
b6 3 core 35 sq mm m 1496.00
b7 3 core 50 sq mm m 2010.00
b8 3 core 70 sq mm m 2790.00
b9 3 core 95 sq mm m 3860.00
b10 3 core 120 sq mm m 4829.00
b11 3 core 150 sq mm m 5907.00
b12 3 core 185 sq mm m 7322.00
b13 3 core 240 sq mm m 9609.00
b14 3 core 300 sq mm m 11864.00
b15 3 core 400 sq mm m 15233.00
d1 4 core 4 sq mm m 307.00
d2 4 core 6 sq mm m 405.00
d3 4 core 10 sq mm m 609.00
d4 4 core 16 sq mm m 868.00
d5 4 core 25 sq mm m 1452.00
d6 4 core 35 sq mm m 1971.00
d7 4 core 50 sq mm m 2647.00
d8 4 core 70 sq mm m 3714.00
11 KV XLPE CABLES
Laying of 11 KV grade XLPE cable in original position with
sand cushioning & protective covering (in ordinary soil)
a 2.5 sq mm E 76.00
b 4 sq mm E 83.00
c 6 sq mm E 90.00
d 10 sq mm E 100.00
e 16 sq mm E 128.00
f 25 sq mm E 137.00
g 35 sq mm E 169.00
h 50 sq mm E 194.00
i 70 sq mm E 234.00
j 95 sq mm E 250.00
k 120 sq mm E 292.00
l 150 sq mm E 316.00
m 185 sq mm E 376.00
n 240 sq mm E 518.00
p 300 sq mm E 531.00
q 3 x 400 sq mm E 603.00
r 3.5/ 4 x 400 sq mm E 640.00
EARTH CLAMPS
685 Supplying and providing earth clamps for siemens/ tropodur type
cable glands of suitable length and other dimensions noted along
with each size of glands for the following sizes of cables as
required.
a1 2 core 4 sq mm E 891.00
a2 2 core 6 sq mm E 891.00
a3 2 core 10 sq mm E 891.00
a4 2 core 16 sq mm E 1217.00
a5 2 core 25 sq mm E 1217.00
a6 2 core 35 sq mm E 1217.00
a7 2 core 50 sq mm E 1406.00
a8 2 core 70 sq mm E 1406.00
a9 2 core 95 sq mm E 1629.00
a10 2 core 120 sq mm E 1745.00
a11 2 core 150 sq mm E 1745.00
b1 3 core 4 sq mm E 891.00
b2 3 core 6 sq mm E 891.00
b3 3 core 10 sq mm E 891.00
b4 3 core 16 sq mm E 1217.00
b5 3 core 25 sq mm E 1217.00
b6 3 core 35 sq mm E 1364.00
b7 3 core 50 sq mm E 1406.00
b8 3 core 70 sq mm E 1629.00
b9 3 core 95 sq mm E 1861.00
b10 3 core 120 sq mm E 1926.00
b11 3 core 150 sq mm E 1926.00
b12 3 core 185 sq mm E 2667.00
b13 3 core 240 sq mm E 3015.00
b13 3 core 300 sq mm E 3569.00
b14 3 core 400 sq mm E 4119.00
d1 4 core 4 sq mm E 891.00
d2 4 core 6 sq mm E 891.00
d3 4 core 10 sq mm E 1217.00
d4 4 core 16 sq mm E 1217.00
d5 4 core 25 sq mm E 1406.00
d6 4 core 35 sq mm E 1406.00
d7 4 core 50 sq mm E 1738.00
d8 4 core 70 sq mm E 1861.00
d9 4 core 95 sq mm E 1926.00
d10 4 core 120 sq mm E 2667.00
d11 4 core 150 sq mm E 2697.00
d12 4 core 185 sq mm E 2811.00
d13 4 core 240 sq mm E 3569.00
d13 4 core 300 sq mm E 4119.00
d14 4 core 400 sq mm E 4920.00
711 Supply and making outdoor / indoor end termination for 1.1 KV
grade PVC/PILC/XLPE cables of the following sizes including
supply of end sealing kit consisting of cable jointing compound,
hardener, plastic mould, adhesive-cum-solvent, epoxy putty, earth
continuity connection, spacers and PVC (NA) tape.
a1 2 core 10 sq mm E 651.00
a2 2 core 16 sq mm E 651.00
a3 2 core 25 sq mm E 673.00
a4 2 core 35 sq mm E 673.00
a5 2 core 50 sq mm E 673.00
a6 2 core 70 sq mm E 813.00
a7 2 core 95 sq mm E 813.00
a8 2 core 120 sq mm E 995.00
a9 2 core 150 sq mm E 995.00
a10 2 core 185 sq mm E 1074.00
a11 2 core 240 sq mm E 1408.00
a12 2 core 300 sq mm E 1408.00
a13 2 core 400 sq mm E 1620.00
b1 3 core 10 sq mm E 651.00
b2 3 core 16 sq mm E 673.00
b3 3 core 25 sq mm E 673.00
b4 3 core 35 sq mm E 673.00
b5 3 core 50 sq mm E 813.00
b6 3 core 70 sq mm E 813.00
b7 3 core 95 sq mm E 1074.00
b8 3 core 120 sq mm E 1074.00
b9 3 core 150 sq mm E 1074.00
b10 3 core 185 sq mm E 1408.00
b11 3 core 240 sq mm E 1620.00
b12 3 core 300 sq mm E 1620.00
b13 3 core 400 sq mm E 2048.00
d1 4 core 10 sq mm E 673.00
d2 4 core 16 sq mm E 673.00
d3 4 core 25 sq mm E 673.00
d4 4 core 35 sq mm E 903.00
d5 4 core 50 sq mm E 903.00
d6 4 core 70 sq mm E 995.00
d7 4 core 95 sq mm E 1074.00
d8 4 core 120 sq mm E 1074.00
d9 4 core 150 sq mm E 1408.00
d10 4 core 185 sq mm E 1408.00
d11 4 core 240 sq mm E 1620.00
d12 4 core 300 sq mm E 1728.00
d13 4 core 400 sq mm E 2048.00
712 Supplying and making indoor end termination with push-on end
termination kit (earthed) for 11 KV grade XLPE cable of the
following sizes including supply of end sealing kit consisting of
stress-cum-semi conducting pad, sliding core, self bonding
insulating tape, boot (with 3 core kit), earth continuity connection
(with 3 core kit), earthing lug (with 1 core kit), adhesive-cum-
solvent, PVC (NA) tape, silicon grease, aluminium crimping lug,
aluminium oxide cloth, nylon string, copper binding wire, hose
clamp and bi-metallic washer etc. as required.
a 3 x 150 sq mm E 8482.00
b 3 x 185 sq mm E 9257.00
c 3 x 240 sq mm E 9257.00
d 3 x 300 sq mm E 10390.00
e 3 x 400 sq mm E 10390.00
713 Supplying and making outdoor end termination with push-on end
termination kit (earthed) for 11 KV grade XLPE cable of the
following sizes including supply of end sealing kit consisting of
stress-cum-semi conducting pad, cap, rain shield, self bonding
insulating case, leakage current collector, protective corrugated
hose pipe, boot, earth continuity connection (with 3 core kit
only), earthing lug (with 1 core kit), adhesive-cum-solvent, PVC
(NA) tape, silicon grease, aluminium crimping lug, aluminium
oxide cloth, nylon string, copper binding wire, hose clamp and bi-
metallic washer etc. as required.
a 3 x 150 sq mm E 9891.00
b 3 x 185 sq mm E 10640.00
c 3 x 240 sq mm E 10640.00
d 3 x 300 sq mm E 11618.00
e 3 x 400 sq mm E 11618.00
PART XV
EARTHING & EARTH CONDUCTORS
720 Supply and providing plate earthing as per IS 3043 with
1200x1200x12 mm GI/CI earth plate, 50 mm GI watering pipe
fixed to the earth plate with 25 x 3mm GI clamps, GI funnel with
weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 450 x 450 x 450
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary soil)
E 9317.00
721 Supply and providing plate earthing as per IS 3043 with
1200x1200x12 mm GI/CI earth plate, 50 mm GI watering pipe
fixed to the earth plate with 25 x 3mm GI clamps, GI funnel with
weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 450 x 450 x 450
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in hard soil)
E 9360.00
722 Supply and providing plate earthing as per IS 3043 with
1200x1200x12 mm GI/CI earth plate, 50 mm GI watering pipe
fixed to the earth plate with 25 x 3mm GI clamps, GI funnel with
weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 450 x 450 x 450
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary rocky - soft laterite
soil)
E 7910.00
723 Supply and providing plate earthing as per IS 3043 with
600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary soil)
E 3118.00
724 Supply and providing plate earthing as per IS 3043 with
600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in hard soil)
E 3212.00
725 Supply and providing plate earthing as per IS 3043 with
600x600x6.30 mm GI/CI earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary rock - soft laterite
soil)
E 3354.00
726 Supply and providing plate earthing as per IS 3043 with
600x600x6.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary soil)
E 14289.00
727 Supply and providing plate earthing as per IS 3043 with
600x600x6.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in hard soil)
E 14383.00
728 Supply and providing plate earthing as per IS 3043 with
600x600x6.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary rock - soft laterite
soil) E 14525.00
729 Supply and providing plate earthing as per IS 3043 with
600x600x3.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary soil)
E 8553.00
730 Supply and providing plate earthing as per IS 3043 with
600x600x3.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in hard soil)
E 8647.00
731 Supply and providing plate earthing as per IS 3043 with
600x600x3.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary rock - soft laterite
soil) E 8788.00
732 Supply and providing plate earthing as per IS 3043 with
300x300x6.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary soil)
E 4730.00
733 Supply and providing plate earthing as per IS 3043 with
300x300x6.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in hard soil)
E 4803.00
734 Supply and providing plate earthing as per IS 3043 with
300x300x6.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary rock - soft laterite
soil) E 4982.00
735 Supply and providing plate earthing as per IS 3043 with
300x300x3.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary soil)
E 3040.00
736 Supply and providing plate earthing as per IS 3043 with
300x300x3.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in hard soil)
E 3114.00
737 Supply and providing plate earthing as per IS 3043 with
300x300x3.00 mm copper earth plate, 20 mm GI watering pipe
fixed to the earth plate with 20 x 3 mm GI clamps, GI funnel
with weld mesh, filling required quantity of charcoal including
construction of inspection chamber with a bed concrete of 1:4:8
PCC using 40 mm broken stone (10 cm thick), brick work in
cement mortar 1:6, plastering the surface of brick masonry and
the exposed surface of PCC bed with cement mortar 1:4, 12 mm
thick, (the finished inside dimension shall be 300 x 300 x 300
mm) but excluding test joint, earth continuity conductor to the
plate, and covering at the top. (in ordinary rock - soft laterite
soil) E 3292.00
738 Supply and providing pipe earthing as per IS 3043 with 3.60 m
long 40 mm dia B class GI pipe, GI funnel with weld mesh,
filling required quantity of charcoal & salt including construction
of inspection chamber with a bed concrete of 1:4:8 PCC using 40
mm broken stone (10 cm thick), brick work in cement mortar 1:6,
plastering the surface of brick masonry and the exposed surface
of PCC bed with cement mortar 1:4, 12 mm thick, (the finished
inside dimension shall be 300 x 300 x 300 mm) but excluding test
joint, earth continuity conductor to the plate, and covering at the
top. (in ordinary soil)
E 2256.00
739 Supply and providing pipe earthing as per IS 3043 with 3.60 m
long 40 mm dia B class GI pipe, GI funnel with weld mesh,
filling required quantity of charcoal & salt including construction
of inspection chamber with a bed concrete of 1:4:8 PCC using 40
mm broken stone (10 cm thick), brick work in cement mortar 1:6,
plastering the surface of brick masonry and the exposed surface
of PCC bed with cement mortar 1:4, 12 mm thick, (the finished
inside dimension shall be 300 x 300 x 300 mm) but excluding test
joint, earth continuity conductor to the plate, and covering at the
top. (in hard soil)
E 2311.00
740 Supply and providing pipe earthing as per IS 3043 with 3.60 m
long 40 mm dia B class GI pipe, GI funnel with weld mesh,
filling required quantity of charcoal & salt including construction
of inspection chamber with a bed concrete of 1:4:8 PCC using 40
mm broken stone (10 cm thick), brick work in cement mortar 1:6,
plastering the surface of brick masonry and the exposed surface
of PCC bed with cement mortar 1:4, 12 mm thick, (the finished
inside dimension shall be 300 x 300 x 300 mm) but excluding test
joint, earth continuity conductor to the plate, and covering at the
top. (in ordinary rocky - soft laterite soil)
E 2564.00
741 Supply and providing the following sizes of cast iron gully trap
with covering at the top of the inspection chamber of earth pit as
required
a 300 x 300 x 6 mm cast iron gully trap with covering E 244.00
b 300 x 300 x 10 mm cast iron gully trap with covering E 366.00
c 450 x 450 x 10 mm cast iron gully trap with covering E 854.00
742 Supply and providing RCC covering slab constructed with the
following for the inspection chamber of earth pit as required
a1 2 x 25 x 3 mm GI strip m 124.00
a2 2 x 32 x 3 mm GI strip m 144.00
a3 2 x 40 x 3 mm GI strip m 168.00
a4 2 x 50 x 3 mm GI strip m 197.00
a5 2 x 65 x 3 mm GI strip m 233.00
b1 2 x 25 x 6 mm GI strip m 192.00
b2 2 x 32 x 6 mm GI strip m 230.00
b3 2 x 40 x 6 mm GI strip m 283.00
b4 2 x 50 x 6 mm GI strip m 331.00
b5 2 x 65 x 6 mm GI strip m 402.00
e1 25 x 3 mm GI strip m 64.00
e2 32 x 3 mm GI strip m 81.00
f1 25 x 6 mm GI strip m 123.00
f2 32 x 6 mm GI strip m 158.00
f3 40 x 6 mm GI strip m 197.00
f4 50 x 6 mm GI strip m 246.00
f5 65 x 6 mm GI strip m 317.00
SUPPLY & DRAWING EARTH CONDUCTORS
750 Supply and drawing bare earthing conductors of the following
sizes along with wiring/ cables and giving connection as required.
a1 25 x 3 mm GI strip m 118.00
a2 25 x 6 mm GI strip m 177.00
a3 32 x 3 mm GI strip m 134.00
a4 32 x 6 mm GI strip m 211.00
a5 40 x 6 mm GI strip m 249.00
a6 50 x 6 mm GI strip m 297.00
a7 65 x 6 mm GI strip m 369.00
a1 20 x 3 mm GI strip m 109.00
a2 25 x 3 mm GI strip m 122.00
a3 25 x 6 mm GI strip m 182.00
a 15 mm dia m 86.00
b 20 mm dia m 105.00
c 25 mm dia m 153.00
d 32 mm dia m 173.00
e 40 mm dia m 201.00
f 50 mm dia m 274.00
g 65 mm dia m 322.00
h 75 mm dia m 430.00
PART XVI
SH: LIGHTNING PROTECTION SYSTEM
775 Riveting , sweating and soldering of one GI/ aluminium/ copper
tape with another GI/ aluminium/ copper tape using 2 nos. 6mm
dia. GI bolt and nut/ rivets including drilling holes, tinning etc. as
required.
E 34.00
776 Providing and fixing testing joint made of 2 no. strips as
mentioned below of the following sizes provided on either side of
the conductors with 4 nos of GI bolts, nuts check nuts and spring
washers etc. complete as required (for down conductors).
a 32 mm dia m 42.00
b 40 mm dia m 53.00
PART XVII
SH: PANEL BOARDS
800 Fabrication, supply, conveyance, installation testing and
commissioning of floor or wall mounting, dust and vermin proof,
cubicle type MV panel board comprising of the following
components/ devices & complying to IS 8623.
m3 29639.00
803 Fabrication of fully partitioned, dust and vermin proof enclosure
for panel assembly as per form 4 of IS 8623 (with latest
amendments) using 1.60 mm CRCA sheet as per approved design
and requirement, with front and rear access facility, bus bar
chambers, hinged doors for all switch gear compartments,
earthing the doors using 4 sq mm braided copper conductor,
providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers
for bus bar chamber and cable alley, powder coating the assembly
after subjecting to 7 tank process etc as required. CRCA sheet
alone be used for the fabrication. Angles/ flats/ slotted angles etc
shall not be used for the fabrication of panel assembly.
m3 31104.00
804 Fabrication of fully partitioned, dust and vermin proof enclosure
for panel assembly as per form 4 of IS 8623 (with latest
amendments) using 1.60 mm CRCA sheet as per approved design
and requirement, with front and rear access facility, bus bar
chambers, hinged doors for all switch gear compartments,
earthing the doors using 4 sq mm braided copper conductor,
providing necessary cut-outs for mounting meters, relays,
indication lamps, bus bar interconnection etc, detachable covers
for bus bar chamber and cable alley, painting the assembly with 2
coats synthetic enamel paint over a coat of zinc chromate primer
etc as required. CRCA sheet alone be used for the fabrication.
Angles/ flats/ slotted angles etc shall not be used for the
fabrication of panel assembly.
m3 25620.00
805 Supply and providing the following size of SMC sheets in the
panel as barriers & shrouding using required bolts and nuts
including cutting to shape etc., as required.
a 2 mm thick m2 2740.00
b 3 mm thick m2 3658.00
c 4 mm thick m 2
4673.00
d 5 mm thick m2 5832.00
e 6 mm thick m 2
7176.00
806 Supply and providing the following sizes of SMC sheets as
support to the extended terminations of switch gears in the
outgoing side in the panel using required bolts and nuts including
cutting to shape etc., as required.
a 8 mm thick m2 9225.00
b 10 mm thick m 2
11394.00
c 12 mm thick m2 13769.00
d 16 mm thick m2 18169.00
807 Supply and fixing the following types of beeding along the
periphery of doors/ other detachable compartments to make the
panel assembly dust & vermin proof including sticking with glue
ACB
a1 800 A, 3 pole, manual draw out type ACB with thermal magnetic
release and OL & SC protection E 92249.00
a2 1000 A, 3 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 99226.00
a3 1250 A, 3 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 123038.00
a4 1600 A, 3 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 138606.00
a5 2000 A, 3 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 167401.00
a6 2500 A, 3 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 196529.00
a7 3200 A, 3 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 150567.00
c1 800 A, 4 pole, manual draw out type ACB with thermal magnetic
release and OL & SC protection E 119783.00
c2 1000 A, 4 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 128576.00
c3 1250 A, 4 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 160251.00
c4 1600 A, 4 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 178476.00
c5 2000 A, 4 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 216761.00
c6 2500 A, 4 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 255671.00
c7 3200 A, 4 pole, manual draw out type ACB with thermal
magnetic release and OL & SC protection E 314707.00
E 9286.00
g2 125 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 11489.00
g3 160 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 14031.00
g4 200 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 18906.00
g5 250 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 18937.00
g6 320 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 21346.00
g7 400 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 21377.00
g8 500 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 25310.00
g9 630 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
26698.00
MCCB - 50/55 kA 4 pole (Group B)
h1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 11590.00
h2 125 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 14371.00
h3 160 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 17566.00
h4 200 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 23567.00
h5 250 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 23598.00
h6 320 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 26601.00
h7 400 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 26601.00
h8 500 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 31502.00
h9 630 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC (Group B)
E 33262.00
MCCB - 70 kA 3 pole
i1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC
E 10570.00
i2 125 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 13010.00
i3 160 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 16205.00
i4 200 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 21210.00
i5 250 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 21241.00
i6 320 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 22498.00
i7 400 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 22529.00
i8 500 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 27851.00
i9 630 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 29396.00
MCCB - 70 kA 4 pole
j1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC
E 13188.00
j2 125 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 16230.00
j3 160 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 20133.00
j4 200 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 26500.00
j5 250 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 26532.00
j6 320 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 27658.00
j7 400 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 28108.00
j8 500 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 34725.00
j9 630 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB having thermal setting range of 80 - 100% with thermal
magnetic release having adjustable OL & SC E 36624.00
826 MICROPROCESSOR BASED MCCB
MCCB - 35/36 kA 3 pole ( Microprocessor based )
a1 10/ 25/ 40/ 63/ 100A, 35/36 kA (Ics=100%Icu), 3 pole, current
limiting type MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC
E 9273.00
a2 160 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 11605.00
a3 250 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 22153.00
a4 320 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 22678.00
a5 400 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 23117.00
a6 500 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 24773.00
a7 630 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 51747.00
MCCB - 35/36 kA 4 pole ( Microprocessor based )
b1 10/ 25/ 63/ 100A, 35/36 kA (Ics=100%Icu), 4 pole, current
limiting type MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC
E 12522.00
b2 160 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 16884.00
b3 250 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 26553.00
b4 320 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 27308.00
b5 400 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 28334.00
b6 500 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 30922.00
b7 630 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with overload setting
of 50 - 100% having adjustable OL & SC E 57482.00
MCCB - 50/55 kA 3 pole ( Microprocessor based )
c1 10 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 15761.00
c2 25 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 15761.00
c3 40 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 21994.00
c4 63 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 15761.00
c5 100 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 15761.00
c6 125 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 22582.00
c7 160 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 21691.00
c8 250 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 23785.00
c9 320 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 24620.00
c10 400 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 25393.00
c11 500 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 27620.00
c12 630 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 29775.00
MCCB - 50/55 kA 4 pole ( Microprocessor based )
d1 10/ 25/ 63/ 100/ 125A, 50/55 kA (Ics=100%Icu), 4 pole, current
limiting type MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC
E 19290.00
d2 160 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 26497.00
d3 250 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 28365.00
d4 320 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 28942.00
d5 400 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 29837.00
d6 500 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 32429.00
d7 630 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 50798.00
MCCB -70 kA 3 pole ( Microprocessor based )
e1 10/ 25/ 63A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 16095.00
e2 100 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 16095.00
e3 160 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 21547.00
e4 200 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 26396.00
e5 250 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 26427.00
e6 320 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 26532.00
e7 400 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 27139.00
e8 500 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 29680.00
e9 630 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 61268.00
MCCB -70 kA 4 pole ( Microprocessor based )
f1 10/ 25/ 63/ 100A, 70 kA (Ics=100%Icu), 4 pole, current limiting
type MCCB with microprocessor based release with thermal
setting of 50 - 100% having adjustable OL & SC
E 20809.00
f2 160 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 27989.00
f3 250 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 32031.00
f4 320 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 33132.00
f5 400 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 33870.00
f6 500 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 37038.00
f7 630 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
MCCB with microprocessor based release with thermal setting of
50 - 100% having adjustable OL & SC E 66689.00
827 MOTORISED MCCB WITH THERMAL MAGNETIC
RELEASE
MCCB - 16 kA 3 pole
a1 16 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a2 20 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a3 25 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a4 32 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a5 40 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a6 50 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a7 63 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a8 80 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a9 100 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 18687.00
a10 160 A, 16 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19818.00
MCCB - 16 kA 4 pole
b1 16 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b2 20 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b3 25 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b4 32 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b5 40 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b6 50 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b7 63 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b8 80 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b9 100 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19762.00
b10 125 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21154.00
b11 160 A, 16 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 22883.00
MCCB - 25 kA 3 pole
c1 16 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 23480.00
c2 20 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 23480.00
c3 25 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c4 32 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c5 40 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c6 50 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c7 63 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c8 80 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c9 100 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 19448.00
c10 125 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 20736.00
c11 160 A, 25 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 22359.00
MCCB - 25 kA 4 pole
d1 16 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d2 20 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d3 25 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d4 32 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d5 40 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d6 50 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d7 63 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d8 80 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d9 100 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 21994.00
d10 125 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 23722.00
d11 160 A, 25 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 25865.00
MCCB - 35 kA 3 pole
e1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC
E 22380.00
e2 125 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 23040.00
e3 160 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 24873.00
e4 200 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 31002.00
e5 250 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 31002.00
e6 320 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 44357.00
e7 400 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 44357.00
e8 500 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 47238.00
e9 630 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC 50015.00
MCCB - 35 kA 4 pole
f1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC
E 24370.00
f2 125 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 25187.00
f3 160 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 27780.00
f4 200 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 32389.00
f5 250 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 32389.00
f6 320 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 49360.00
f7 400 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 49360.00
f8 500 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 52974.00
f9 630 A, 35 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC 56430.00
MCCB - 50/55 kA 3 pole (Group B)
g1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC
E 23584.00
g2 125 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 25816.00
g3 160 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 28330.00
g4 200 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 33202.00
g5 250 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 33202.00
g6 320 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 45510.00
g7 400 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 45510.00
g8 500 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 49413.00
g9 630 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 50800.00
MCCB - 50/55 kA 4 pole
h1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC
E 25890.00
h2 125 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 28666.00
h3 160 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 31866.00
h4 200 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 37863.00
h5 250 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 37863.00
h6 320 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 50800.00
h7 400 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 50800.00
h8 500 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 55698.00
h9 630 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 80 - 100% with
thermal magnetic release having adjustable OL & SC E 57426.00
MCCB - 70 kA 3 pole
i1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC
E 24843.00
i2 125 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 27308.00
i3 160 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 30425.00
i4 200 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 35510.00
i5 250 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 35541.00
i6 320 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 46666.00
i7 400 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 46728.00
i8 500 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 52509.00
i9 630 A, 70 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 58168.00
MCCB - 70 kA 4 pole
j1 1.6/ 2/ 2.5/ 3.2/ 4/ 5/ 6.3/ 8/ 10/ 12.5/ 16/ 20/ 25/ 32/ 40/ 50/ 63/
80/ 100A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC
E 27487.00
j2 125 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 30530.00
j3 160 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 34432.00
j4 200 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 40800.00
j5 250 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 40831.00
j6 320 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 51857.00
j7 400 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 52307.00
j8 500 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 58964.00
j9 630 A, 70 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB having thermal setting range of 70 - 100% with
thermal magnetic release having adjustable OL & SC E 60823.00
828 MOTORISED MCCB WITH MICROPROCESSOR BASED
RELEASE
MCCB - 35/36 kA 3 pole ( Microprocessor based )
a1 10/ 25/ 40/ 63/ 100A, 35/36 kA (Ics=100%Icu), 3 pole, current
limiting type motorised MCCB with microprocessor based
release with overload setting of 50 - 100% having adjustable OL
& SC
E 26597.00
a2 160 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 30714.00
a3 250 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 36484.00
a4 320 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 46872.00
a5 400 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 47431.00
a6 500 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 48967.00
a7 630 A, 35/36 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 75976.00
MCCB - 35/36 kA 4 pole ( Microprocessor based )
b1 10/ 25/ 63/ 100A, 35/36 kA (Ics=100%Icu), 4 pole, current
limiting type motorised MCCB with microprocessor based
release with overload setting of 50 - 100% having adjustable OL
& SC
E 30289.00
b2 160 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 35611.00
b3 250 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 40884.00
b4 320 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 51508.00
b5 400 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 52564.00
b6 500 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 55121.00
b7 630 A, 35/36 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
overload setting of 50 - 100% having adjustable OL & SC E 81712.00
MCCB - 50/55 kA 3 pole ( Microprocessor based )
c1 10/ 25/ 40/ 63/ 100A, 50/55 kA (Ics=100%Icu), 3 pole, current
limiting type motorised MCCB with microprocessor based
release with thermal setting of 50 - 100% having adjustable OL
& SC E 29137.00
c2 125 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 34720.00
c3 160 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 34720.00
c4 250 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 36693.00
c5 320 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 36693.00
c6 400 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 47409.00
c7 500 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 48116.00
c8 630 A, 50/55 kA (Ics=100%Icu), 3 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 48147.00
MCCB - 50/55 kA 4 pole ( Microprocessor based )
d1 10/ 25/ 63/ 100A, 50/55 kA (Ics=100%Icu), 4 pole, current
limiting type motorised MCCB with microprocessor based
release with thermal setting of 50 - 100% having adjustable OL
& SC
E 47889.00
d2 125 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 51533.00
d3 160 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 55096.00
d4 200 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 56100.00
d5 250 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 56963.00
d6 320 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 77339.00
d7 400 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 78234.00
d8 500 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 80827.00
d9 630 A, 50/55 kA (Ics=100%Icu), 4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 108383.00
MCCB -70 kA 3/4 pole ( Microprocessor based )
e1 10/ 25/ 63/ 100A, 70 kA (Ics=100%Icu), 3/4 pole, current
limiting type motorised MCCB with microprocessor based
release with thermal setting of 50 - 100% having adjustable OL
& SC
E 30394.00
e2 160 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 35847.00
e3 200 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 40691.00
e4 250 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 40727.00
e5 320 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 50730.00
e6 400 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 51338.00
e7 500 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 53878.00
e8 630 A, 70 kA (Ics=100%Icu), 3/4 pole, current limiting type
motorised MCCB with microprocessor based release with
thermal setting of 50 - 100% having adjustable OL & SC E 85466.00
829 3 POLE MCCB WITH ONLY SC PROTECTION FOR MOTOR
STARTERS
35 kA, 3 pole
a1 1.00 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a2 1.60 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a3 2.00 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a4 2.50 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a5 3.20 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a6 4.00 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a7 5.00 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a8 6.50A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a9 8.50 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a10 11 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 9102.00
a11 12.50 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a12 20 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 9102.00
a13 32 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 9102.00
a14 52 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 9102.00
a15 80 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 9102.00
a16 100 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9102.00
a17 125 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 9997.00
a18 160 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10992.00
a19 200 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10997.00
a20 400 A, 35 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 25358.00
50 kA, 3 pole
b1 1.00 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b2 1.60 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b3 2.00 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b4 2.50 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b5 3.20 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b6 4.00 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b7 5.00 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b8 6.50A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b9 8.50 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b10 11 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 10072.00
b11 12.50 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b12 20 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 10072.00
b13 32 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 10072.00
b14 52 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 10072.00
b15 80 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type MCCB
with only SC protection for motor starter E 10072.00
b16 100 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 10072.00
b17 125 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 19138.00
b18 160 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 19138.00
b19 200 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 19142.00
b20 400 A, 50 kA (Ics=100%Icu), 3 pole, current limiting type
MCCB with only SC protection for motor starter E 26511.00
830 EARTH FAULT MODULE OF MCCB FOR EXTERNAL CT
(PERCENTAGE VA, 5P 10) WITHOUT CT
HRC fuses
S & F following HRC fuses
843 DIN type fuse links
a1 2 A, DIN type fuse link of size 000 E 221.00
a2 4 A, DIN type fuse link of size 000 E 221.00
a3 6 A, DIN type fuse link of size 000 E 209.00
a4 10 A, DIN type fuse link of size 000 E 209.00
a5 16 A, DIN type fuse link of size 000 E 209.00
a6 20 A, DIN type fuse link of size 000 E 209.00
a7 25 A, DIN type fuse link of size 000 E 209.00
a8 32 A, DIN type fuse link of size 000 E 209.00
a9 35/36 A, DIN type fuse link of size 000 E 215.00
a10 40 A, DIN type fuse link of size 000 E 215.00
a11 50 A, DIN type fuse link of size 000 E 215.00
a12 63 A, DIN type fuse link of size 000 E 215.00
a13 80 A, DIN type fuse link of size 000 E 215.00
a14 100 A, DIN type fuse link of size 000 E 215.00
j1 355 A, bolted central tag type fuse link of size B4 (Group A) E 550.00
j2 400 A, bolted central tag type fuse link of size B4 (Group A) E 669.00
850 CONTACTORS
Power contactors for motor application
a1 9 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO + 1 NC auxiliary contacts & with AC coil
E 681.00
a2 12 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO + 1 NC auxiliary contacts & with AC coil
E 749.00
a3 17 A, 3 pole, AC 3 rated power contactor for motor application
with AC coil E 855.00
a4 26A, 3 pole, AC 3 rated power contactor for motor application
with AC coil E 1083.00
a5 32 A, 3 pole, AC 3 rated power contactor for motor application
with AC coil E 2235.00
a6 40 A, 3 pole, AC 3 rated power contactor for motor application
with AC coil E 3275.00
a7 50 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO + 1 NC auxiliary contacts & with AC coil
E 4012.00
a8 65 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 5373.00
a9 75 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 5899.00
a10 96 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO + 1 NC auxiliary contacts & with AC coil
E 7756.00
a11 110 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 8968.00
a12 145 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO + 1 NC auxiliary contacts & with AC coil
E 11633.00
a13 185 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO+ 1 NC auxiliary contacts & with AC coil
E 15566.00
a14 210 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 16537.00
a15 260 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 21200.00
a16 300 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 24882.00
a17 400 A, 3 pole, AC 3 rated power contactor for motor application
with 2 NO + 2 NC auxiliary contacts & with AC coil
E 30492.00
a18 460 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO+ 1 NC auxiliary contacts & with AC coil
E 43670.00
a19 580 A, 3 pole, AC 3 rated power contactor for motor application
with 1 NO+ 1 NC auxiliary contacts & with AC coil
E 57783.00
b1 3 phase over current + earth fault relay with high set suitable for
auxiliary supply voltage of 20 - 110 V AC/DC & with 4 NO
contacts E 25466.00
b2 3 phase over current + earth fault relay with high set suitable for
auxiliary supply voltage of 20 - 110 V AC/DC & with 2 NO + 2
NC contacts E 25466.00
b3 3 phase over current + earth fault relay with high set suitable for
auxiliary supply voltage of 88 - 264 V AC/DC & with 4 NO
contacts E 25466.00
b4 3 phase over current + earth fault relay with high set suitable for
auxiliary supply voltage of 88 - 264 V AC/DC & with 2 NO + 2
NC contacts E 25466.00
c1 3 phase over current + earth fault relay with high set & RS 485
port suitable for auxiliary supply voltage of 20 - 110 V AC/DC
E 43104.00
c2 3 phase over current + earth fault relay with high set & RS 485
port suitable for auxiliary supply voltage of 20 - 110 V AC/DC
E 43104.00
c3 3 phase over current + earth fault relay with high set & RS 485
port suitable for auxiliary supply voltage of 88 - 264 V AC/DC
E 43104.00
c4 3 phase over current + earth fault relay with high set & RS 485
port suitable for auxiliary supply voltage of 88 - 264 V AC/DC
E 43104.00
j1 45-50-55 Hz, vibrating reed type frequency meter for all voltage
ranges, accuracy class 1 & of size 96 x 96 mm E 730.00
Power factor meters
k1 Analogue type power factor meters of range 0.50-1-0.50 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 1 element type suitable for single/ three
phase application, accuracy class 1 & of size 96 x 96 mm
E 1596.00
k2 Analogue type power factor meters of range 0.80-1-0.80 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 1 element type suitable for single/ three
phase application, accuracy class 1 & of size 96 x 96 mm
E 1596.00
k3 Analogue type power factor meters of range 0.50-1-0.50 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 2 element type suitable for three phase
application, accuracy class 1 & of size 96 x 96 mm
E 3520.00
k4 Analogue type power factor meters of range 0.50-1-0.50 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 3 element type suitable for three phase
application, accuracy class 1 & of size 96 x 96 mm
E 4314.00
k5 Analogue type power factor meters of range 0.50-1-0.50 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 1 element type suitable for single/ three
phase application, accuracy class 1 & of size 144 x 144 mm
E 1684.00
k6 Analogue type power factor meters of range 0.80-1-0.80 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 1 element type suitable for single/ three
phase application, accuracy class 1 & of size 144 x 144 mm
E 1684.00
k7 Analogue type power factor meters of range 0.50-1-0.50 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 2 element type suitable for three phase
application, accuracy class 1 & of size 144 x 144 mm
E 3962.00
k8 Analogue type power factor meters of range 0.50-1-0.50 for
balanced/ unbalanced load with 90° deflection scale of all voltage
ranges, 1 A/ 5 A rated, 3 element type suitable for three phase
application, accuracy class 1 & of size 144 x 144 mm
E 4839.00
m3 6571.00
b Fabrication, supply & installation of dust and vermin proof, wall/
floor mounting, metering cubicle of cubicle construction made
from 1.60 mm CRCA sheet, providing necessary supports made
from the same gauge CRCA sheet to fix KSEB meters, fuse units,
CT etc, hinged door construction for the front side with
compartments if necessary, providing vision panel for the meter
compartment, knock out for cable entry and exit, powder coating
the board after 7 tank chemical treatment etc as required
including fixing it on wall, making good the damages colour
washing etc. as required. CRCA sheet alone be used for the
fabrication. Angles/ flats/ slotted angles etc shall not be used for
the fabrication of main housing of meter board.
m3 8095.00
901 Supply and providing the following size of SMC sheets in the
panel as barriers & shrouding using required bolts and nuts
including cutting to shape etc., as required.
a 2 mm thick E 2740.00
b 3 mm thick E 3658.00
c 4 mm thick E 4673.00
d 5 mm thick E 5832.00
e 6 mm thick E 7176.00
902 Supply and fixing the following types of beeding along the
periphery of doors/ other detachable compartments to make the
panel assembly dust & vermin proof.
a A' section neoprene beeding suitable for 1.60/ 2.00 mm sheet
E 49.00
b U' section rubber beeding suitable for 1.60/ 2.00 mm sheet E 7.00
c U' section PVC beeding suitable for 1.60/ 2.00 mm sheet E 4.50
903 Fabrication, supply, conveyance and installation of base frame
for metering cubicle using channel of class designation ISMC 75
including cutting, welding, drilling holes, painting with two coats
of synthetic enamel paint over a coat of zinc chromate primer,
bolting the frame to the metering cubicle and to the finished floor
using required bolt and nuts, making good the damages etc. as
required.
m 612.00
904 Fabrication, supply, conveyance and installation of angle iron
frame work for the metering cubicle using suitable size angle iron
cut and welded to shape including painting with two coats of
synthetic enamel paint over a coat of zinc chromate primer,
bolting the frame to the panel using required bolt and nuts, fixing
the whole to the wall, making good the damages etc. as required.
Kg 95.50
905 Supply and fixing the following accessories in the existing meter
board and giving connections etc.
BS type fuse units
a1 20 A fuse holder for BS type blade fuses. E 113.00
a2 32 A fuse holder for BS type blade fuses. E 186.00
Part XX
MISCELLANEOUS
910 Supplying and installation including all manner of supports/
suspenders, anchor bolts etc for cable trays made out of suitable
size channel sections, slotted angles, flats, MS plates etc as
required including painting with 2 coats of synthetic enamel paint
over a coat of zinc chromate primer, making good the damages,
colour washing etc as required.
Kg 87.00
911 Supplying and installation of supports, anchor bolts etc made out
of suitable size single section MS angle, flats etc as required
including painting with 2 coats of synthetic enamel paint
Kg 61.00
912 Supplying and installation of supports, anchor bolts etc made out
of suitable size single section channel etc as required including
painting with 2 coats of synthetic enamel paint
Kg 60.50
913 Supply and providing MS chequered plate of suitable thickness
including cutting, welding, painting etc. as required for the cable
trench covering. Kg 60.00
914 Supply and providing SMC chequered plate of the following
thickness including cutting, fixing with the existing frame-work
etc. as required for the cable trench covering.
a 8 mm thick m2 8998.00
b 10 mm thick m2 11246.00
915 Supply and providing 6 mm thick & 1 m wide electrical grade
chequered type rubber mat to withstand 3.3 KV dielectric
strength conforming to IS 5429/ 1969. m2 646.00
916 Supply and providing 12 mm thick & 1 m wide electrical grade
chequered type rubber mat to withstand 15 KV dielectric strength
conforming to IS 5429/ 1969. m2 1113.00
917 Supply and providing 5 Kg. Dry Chemical Powder type Fire
Extinguisher with hose and clamps including fixing it to wall as
required. E 2190.00
918 Supply and providing 9 Litre capacity GI Fire Bucket painted in
post office red with primer coat of red oxide and written with
white paint 'FIRE' mounted on MS angle frame work/ wall
bracket filled with fine sand, painting the bracket/ floor stand
including making good the damages, colour washing etc. as
required.
E 133.00
919 Supply and providing First Aid Chart duly framed and placed in a
conspicuous location for clear vision. E 184.00
920 Painting letters or figures of the following sizes with enamel
paint as identification mark to SB, DB, panel board etc as
required
a 2.50 cm, 4 cm or 5 cm height E 8.30
b 6.5 cm, 8 cm or 13 cm height E 19.20
Part XXI
CIVIL ITEMS
Earth work excavation
950 Earth work excavation in ordinary soil and depositing with a lead
a1 up to 50 m and lift up to 1.50 m including neat banking m3 81.77
a2 Earth work excavation in ordinary soil and depositing with a lead
up to 50 m and lift above 1.50 m but up to 3.00 m including neat
banking m3 92.74
a3 Earth work excavation in ordinary soil and depositing with a lead
up to 50 m and lift above 3.00 m but up to 4.50 m including neat
banking m3 103.78
951 Earth work excavation in hard soil and depositing with a lead up
a1 to 50 m and lift up to 1.50 m including neat banking m3 151.11
a2 Earth work excavation in hard soil and depositing with a lead up
to 50 m and lift above 1.50 m but up to 3.00 m including neat
banking m3 162.29
a3 Earth work excavation in hard soil and depositing with a lead up
to 50 m and lift above 3.00 m but up to 4.50 m including neat
banking m3 173.33
952 Earth work excavation in ordinary rocky soil (soft laterite) and
a1 depositing with a lead up to 50 m and lift up to 1.50 m including
neat banking m3 280.83
a2 Earth work excavation in ordinary rocky soil (soft laterite) and
depositing with a lead up to 50 m and lift above 1.50 m but up to
3.00 m including neat banking m3 291.87
a3 Earth work excavation in ordinary rocky soil (soft laterite) and
depositing with a lead up to 50 m and lift above 3.00 m but up to
4.50 m including neat banking m3 302.91
953 Earth work excavation (including refilling) in ordinary soil and
a1 depositing with a lead up to 50 m and lift up to 1.50 m including
breaking clods, watering, ramming and sectioning of spoil bank
etc complete
m3 92.46
a2 Earth work excavation (including refilling) in ordinary soil and
depositing with a lead up to 50 m and lift above 1.50 m but up to
3.00 m including breaking clods, watering, ramming and
sectioning of spoil bank etc complete
m3 103.50
a3 Earth work excavation (including refilling) in ordinary soil and
depositing with a lead up to 50 m and lift above 3.00 m but up to
4.50 m including breaking clods, watering, ramming and
sectioning of spoil bank etc complete
m3 104.60
954 Earth work excavation (including refilling) in hard soil and
a1 depositing with a lead up to 50 m and lift up to 1.50 m including
breaking clods, watering, ramming and sectioning of spoil bank
etc complete
m3 172.50
a2 Earth work excavation (including refilling) in hard soil and
depositing with a lead up to 50 m and lift above 1.50 m but up to
3.00 m including breaking clods, watering, ramming and
sectioning of spoil bank etc complete
m3 183.54
a3 Earth work excavation (including refilling) in hard soil and
depositing with a lead up to 50 m and lift above 3.00 m but up to
4.50 m including breaking clods, watering, ramming and
sectioning of spoil bank etc complete
m3 194.58
955 Earth work excavation (including refilling) in ordinary rocky soil
a1 (soft laterite) and depositing with a lead up to 50 m and lift up to
1.50 m including breaking clods, watering, ramming and
sectioning of spoil bank etc complete
m3 323.61
a2 Earth work excavation (including refilling) in ordinary rocky soil
(soft laterite) and depositing with a lead up to 50 m and lift above
1.50 m but up to 3.00 m including breaking clods, watering,
ramming and sectioning of spoil bank etc complete
m3 334.65
a3 Earth work excavation (including refilling) in ordinary rocky soil
(soft laterite) and depositing with a lead up to 50 m and lift above
3.00 m but up to 4.50 m including breaking clods, watering,
ramming and sectioning of spoil bank etc complete
m3 345.69
956 Brick work in cement mortar 1:6 with country burnt bricks 19cm
x 9cm x 9cm for foundation and basement. m3 2965.38
957 Plastering with cement mortar 1:4, 12mm thick one coat. m2 142.73
958 Plain cement concrete 1:4:8 using 40mm ( Normal size ) broken
stone. ( m3 )
m3 3431.20
959 Cement concrete 1:2:4 using 20mm (nominal size) broken stone
for reinforced concrete work. m3 5064.66
960 Cement concrete 1:3:6 using 20mm (nominal size) broken stone
for reinforced concrete work. m3 4448.45
961 Cement concrete 1:4:8 using 20mm (nominal size) broken stone
for reinforced concrete work. m3 4156.58
962 Reinforcement for R.C.C works, bend tied and placed in position
(plain grill requiring bend cold) using tor steel Kg 59.88
963 Form work for reinforced cement concrete in slabs including
wooden planks, joists, bamboo posts and labour for taking down
after completion of work (Hire and labour charges only)
m2 326.36
964 Colour washing, two coats m2 7.08
###
###
###
###
###
46.50
6.20
4.10
OL & SC protection
GROUP B
17265
```