Professional Documents
Culture Documents
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
Emergency Overview
Form : liquid
Colour : light brown
Odour : not significant
While this material is not considered hazardous by the OSHA Hazard Communication Standard
(29 CFR 1910.1200), this MSDS contains valuable information critical to the safe handling and
proper use of the product. This MSDS should be retained and available for other users of this
product.
1/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
Carcinogenicity:
No component of this product present at levels greater than or equal to 0.1% is identified as probable,
possible or confirmed human carcinogen by IARC.
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by OSHA.
No component of this product present at levels greater than or equal to 0.1% is identified as a known
or anticipated carcinogen by NTP.
No component of this product present at levels greater than or equal to 0.1% is identified as a
carcinogen or potential carcinogen by ACGIH.
Environmental Effects
Environmental Effects : No information available.
Chemical nature
Hazardous components
Eye contact : Immediately flush with plenty of water for at least 20 minutes.
Get medical aid.
Notes to physician
2/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
Flammable properties
Environmental precautions : Prevent spilled material from entering the ground, water and/or
air by using appropriate containment methods.
Methods for cleaning up : Pump into salvage tanks and/or absorb with suitable material.
Use sparkless shovels to remove material.
3/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
Handling
Handling : Avoid contact with skin and eyes.
Handle as an industrial chemical.
Keep container tightly closed.
Keep away from oxidizing agents.
Storage
Advice on common storage : Keep in a dry, cool and well-ventilated place.
Exposure Guidelines
Contains no substances with occupational exposure limit values.
Engineering measures
Engineering measures : Use with local exhaust ventilation.
Skin and body protection : Choose body protection according to the amount and
concentration of the dangerous substance at the work place.
Form : liquid
Colour : light brown
Odour : not significant
Odor Threshold : no data available
Flash point : > 100 °C (> 212.00 °F)
Method: 49 (Pensky-Martens)
4/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
Method: calculated
at 40 °C (104.00 °F)
no data available
5/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
SARA 302 Components : SARA 302: No chemicals in this material are subject to the
reporting requirements of SARA Title III, Section 302.
If listed below, this product contains toxic chemical(s) subject to the reporting requirements of Section
313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR part 372.
6/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
If not listed above, this product does not contain HAPs at 1% or 0.1% or greater. Refer to Section 3
for HAP weight percentage.
State Laws
California Prop. 65 : This product does not contain any chemicals known to State of
Components California to cause cancer, birth defects, or any other
reproductive harm.
7/8
Material Safety Data Sheet
BYK-333
Version 2 Revision Date 08/04/2010 Print Date 08/04/2010
CONEG Heavy Metal: We certify that this product does not contain Lead, Mercury, Cadmium or
hexavalent chromium in the sum concentration of 100 ppm by weight or greater.
Further information
The information provided in this Safety Data Sheet is correct to the best of our knowledge,
information and belief at the date of its publication. The information given is designed only as a
guidance for safe handling, use, processing, storage, transportation, disposal and release and is
not to be considered a warranty or quality specification. The information relates only to the
specific material designated and may not be valid for such material used in combination with any
other materials or in any process, unless specified in the text.
8/8