Professional Documents
Culture Documents
Digital screen showing the optional curing cycles that can be set from 6 seconds
(0.1 min) to maximum 99 minutes for the inquiry or demanded according to the
thicker resins materials or forming the tray- handle.
Safe switch to cut off light when open the chamber door during curing cycle.
Long life fluorescent light for 5,000 hours with high power output, but low
electricity consumption.
Stable balance with even thickness of a tray come after polymerization of the
material patterns by the TRAY-LUX M5, that is much easier, faster and better than
the traditional manual-forming technique to those self-cure composites or other
resin materials.
Concerning the discrepancy of the product, which caused by weather, temperature and used materials, we reserve the rights of explanation. The specifications are subject to change and revision without prior notice.