You are on page 1of 8

Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

PQ05RD08 Series/PQ3RD083/PQ6RD083
0.8A Output, Low Power-Loss Voltage Regulator

■ Features ■ Outline Dimensions (Unit : mm)


● Low power-loss (Dropout voltage: MAX. 0.5V at Io=0.5A)
4.5±0.2
● 0.8A output type 10.2MAX. 4 – (φ1.4)
2.8±0.2
● Compact resin package (equivalent to TO-220)

3.6±0.2
7.4±0.2
● Available 3.3V/5V/6.3V/9V/12V output type

● Output voltage precision: ±3.0%

● Built-in ON/OFF control function φ3.2±0.1

4.8MAX. 15.6±0.5
PQ05RD08
● Built-in Overcurrent, overheat protection functions, ASO

29.1MAX.
Epoxy resin
protection circuit
( 1.5 )
● Lead forming type is also available.
4 – 1.4± 0.3
0

13.5MIN.
4 – 0.6± 0.2
0.1

■ Applications
● Power supplies for various electronic equipment such as
AV, OA equipment 3 – ( 2.54 ) ( 0.5 )

■ Model Line-ups
( ) : Typical dimensions
1 2 3 4

0.8A output
3.3V output PQ3RD083
Internal connection diagram
5.0V output PQ05RD08
6.3V output PQ6RD083 1 2
1 DC input(VIN )
2 DC output ( Vo )
9.0V output PQ09RD08 3 GND
12.0V output PQ12RD08 Specific IC 4 ON/OFF control terminal( Vc )
4

■ Absolute Maximum Ratings (Ta=25˚C)


Parameter Symbol Rating Unit
❇1 Input voltage VIN 20 V
❇1 ON/OFF control voltage VC 20 V
Output current IO 0.8 A
❇2 Power
PD1 1.25 W
dissipation
PD2 10 W
❇3 Junction temperature Tj 150 ˚C
Operating temperature Topr –20 to +80 ˚C
Storage temperature Tstg –40 to +150 ˚C
Soldering temperature Tsol 260 (For 10s) ˚C
❇1 All are open except GND and applicable terminals.
❇2 PD1: No heat sink, PD2: With infinite heat sink
❇3 Overheat protection may operate at 125<=Tj<=150˚C.
• Please refer to the chapter " Handling Precautions ".

Notice In the absence of confirmation by device specification sheets,SHARP takes no responsibility for any defects that may occur in equipment using any SHARP 113
devices shown in catalogs,data books,etc.Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
Internet Internet address for Electronic Components Group http://www.sharp.co.jp/ecg/
Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

■ Electrical Characteristics (Unless otherwise specified, Io=0.5A, ❇4, Ta=25˚C)


Parameter Symbol Conditions MIN. TYP. MAX. Unit
PQ3RD083 3.201 3.3 3.399
PQ05RD08 4.85 5.0 5.15
❇4
Output voltage PQ6RD083 VO 6.111 6.3 6.489 V
PQ09RD08 8.73 9.0 9.27
PQ12RD08 11.64 12.0 12.36
Load regulation RegL Io=5mA to 0.8A, ❇4 –– 0.1 2.0 %
PQ05RD08 series –– 0.5 2.5
Line regulation RegI ❇5, IO=5mA %
PQ3RD083/PQ6RD083 –– 0.1 2.5
Temperature coefficient of output voltage TCVO Tj=0 to 125˚C, Io=5mA –– ±0.02 –– %/˚C
Ripple rejection RR Refer to Fig.2 45 55 –– dB
Dropout voltage Vi-O ❇6, Io=0.5A –– –– 0.5 V
❇4
❇7 ON-state voltage for control VC(ON) 2.0 –– –– V
ON-state current for control IC(ON) VC=2.7V, ❇4 –– –– 20 µA
OFF-state voltage for control ❇4 –– ––
VC(OFF) 0.8 V
OFF-state current for control IC(OFF) VC=0.4V, ❇4 –– –– –0.4 mA
Quiescent current Iq IO=0A, ❇4 –– –– 10 mA
❇4 PQ3RD083: VIN=5V, PQ05RD08:VIN =7V, PQ6RD083: VIN=8V, PQ09RD08:VIN =11V, PQ12RD08: VIN =14V
❇5 PQ3RD083: VIN=4 to 10V, PQ6RD083: VIN= 7 to 13V, PQ05RD08:VIN = 6 to 12V, PQ09RD08:VIN =10 to 16V, PQ12RD08: VIN =13 to 17V
❇6 Input voltage shall be the value when output voltage is 95% in comparison with the initial value. (PQ3RD08:VIN =3.7V)
❇7 In case of opening control terminal r, output voltage turns on.

Fig. 1 Test Circuit Fig. 2 Test Circuit of Ripple Rejection

VIN 47µF VO + f=120Hz (sine wave)


1 2 1 2 ei=0.5Vrms
VC IO VIN=5V (PQ3RD083)
4 A IO 4 47µF
ei 7V (PQ05RD08)
+ +
3 A V 3 RL V eo 8V (PQ6RD083)
0.33µF RL 0.33µF 11V (PQ09RD08)
A Iq VIN 14V (PQ12RD08)
IC
IO=0.5A
RR=20 log (ei/eo)

Fig. 3 Power Dissipation vs. Ambient Fig. 4 Overcurrent Protection


Temperature Characteristics (Typical Value)
20 100
PD1 :No heat sink
VIN=VO+2V
PD2 :With infinite heat sink
Relative output voltage (%)

80
Power dissipation PD (W)

15
VIN=VO+5V

60
10 PD2

40

5 VIN=VO+1V
20
PD1
0 0
0 50 –20 80 100 150 0 0.5 1.0 1.5 2.0
Ambient temperature Ta (˚C) Output current IO (A)
Note) Oblique line portion : Overheat protection may operate in this area.

114
Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

Fig. 5 Overcurrent Protection Characteristics Fig. 6 Overcurrent Protection Characteristics


(Typical Value) (PQ05RD08) (Typical Value) (PQ09RD08)
100 100
VIN=20V
Relative output voltage (%)

Relative output voltage (%)


80 80
VIN=15V
VIN=7V VIN=20V
60 60

40 40

VIN=15V
20 20
VIN=7V

0 0
0 0.4 0.8 1.2 1.6 0 0.4 0.8 1.2 1.6
Output current IO (A) Output current IO (A)
Fig. 7 Overcurrent Protection Characteristics Fig. 8 Output Voltage Deviation vs. Junction
(Typical Value) (PQ12RD08) Temperature (PQ3RD083)
100 30
VIN=5V

Output voltage deviation ∆VO (mV)


20 IO=0.5A
Relative output voltage (%)

80
VIN=20V
10
60
VIN=17V
0
40
–10
VIN=14V
20 –20

0 –30
0 0.4 0.8 1.2 1.6 –25 0 25 50 75 100 125
Output current IO (A) Junction temperature Tj (˚C)

Fig. 9 Output Voltage Deviation vs. Junction Fig.10 Output Voltage Deviation vs. Junction
Temperature (PQ05RD08) Temperature (PQ6RD083)
150 30
VIN=7V VIN=8V
Output voltage deviation ∆VO (mV)
Output voltage deviation ∆VO (mV)

IO=0.3A 20 IO=0.5A
100

10
50
0
0
–10

–50 –20

–100 –30
–25 0 25 50 75 100 125 –25 0 25 50 75 100 125
Junction temperature Tj (˚C) Junction temperature Tj (˚C)

115
Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

Fig.11 Output Voltage Deviation vs. Junction Fig.12 Output Voltage Deviation vs. Junction
Temperature (PQ09RD08) Temperature (PQ12RD08)
200 250
VIN=11V VIN=14V
Output voltage deviation ∆VO (mV)

Output voltage deviation ∆VO (mV)


200
150 IO=0.5A IO=0.5A
150
100
100
50 50

0 0
–50
–50
–100
–100 –150
–150 –200
–25 0 25 50 75 100 125 –25 0 25 50 75 100 125
Junction temperature Tj (˚C) Junction temperature Tj (˚C)

Fig.13 Output Voltage vs. Input Fig.14 Output Voltage vs. Input
Voltage (PQ3RD083) Voltage (PQ05RD08)
5 8
Tj=25˚C
7
4
Output voltage VO (V) 6
Output voltage VO (V)

RL=∞
RL=∞ 5
3
RL=8.2Ω 4
RL=4.1Ω RL=12.5Ω
2 3
RL=6.25Ω
2
1
1
Tj=25˚C
0 0
0 1 2 3 4 5 6 7 0 2 4 6 8 10
Input voltage VIN (V) Input voltage VIN (V)

Fig.15 Output Voltage vs. Input Fig.16 Output Voltage vs. Input
Voltage (PQ6RD083) Voltage (PQ09RD08)
8 12
Tj=25˚C
7
RL=∞
Output voltage VO (V)

Output voltage VO (V)

6
RL=∞
8
5 RL=22.5Ω
RL=15.75Ω
4
RL=7.88Ω
3 RL=11.25Ω
4
2

1
Ta=25˚C
0 0
0 2 4 6 8 10 0 4 8 12 16 20
Input voltage VIN (V) Input voltage VIN (V)

116
Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

Fig.17 Output Voltage vs. Input Fig.18 Circuit Operating Current vs. Input
Voltage (PQ12RD08) Voltage (PQ3RD083)
20 40
Tj=25˚C Tj=25˚C

Circuit operating current IBIAS (mA)


15 30
Output voltage VO (V)

RL=∞
10 20
RL=30Ω RL=4.1Ω

5 10
RL=8.2Ω
RL=15Ω
RL=∞
0 0
0 5 10 15 20 25 0 1 2 3 4 5
Input voltage VIN (V) Input voltage VIN (V)

Fig.19 Circuit Operating Current vs. Input Fig.20 Circuit Operating Current vs. Input
Voltage (PQ05RD08) Voltage (PQ6RD083)
40 40
Tj=25˚C Ta=25˚C

Circuit operating current IBIAS (mA)


Circuit operating current IBIAS (mA)

30 30

20 20

RL=6.25Ω
RL=7.88Ω
10 RL=12.5Ω 10

RL=∞ RL=15.75Ω

0 RL=∞
0
0 5 10 0 1 2 3 4 5 6 7 8 9 10 11
Input voltage VIN (V) Input voltage VIN (V)

Fig.21 Circuit Operating Current vs. Input Fig.22 Circuit Operating Current vs. Input
Voltage (PQ09RD08) Voltage (PQ12RD08)
40 40
Tj=25˚C Tj=25˚C
Circuit operating current IBIAS (mA)

Circuit operating current IBIAS (mA)

30 30

20 20

RL=11.25Ω RL=15Ω
10 10
RL=30Ω
RL=22.5Ω
RL=∞ RL=∞
0 0
0 5 10 15 0 5 10 15 20 25
Input voltage VIN (V) Input voltage VIN (V)

117
Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

Fig.23 Dropout Voltage vs. Junction Fig.24 Dropout Voltage vs. Junction
Temperature (PQ05RD08 Series) Temperature (PQ3RD083/PQ6RD083)
0.5 Input voltage is the value when output voltage is 0.6 Input voltage is the value when output voltage is
95% in comparison with the intial value 95% in comparison with the intial value
0.5
0.4
Dropout voltage Vi-O (V)

Dropout voltage Vi-O (V)


IO=0.8A
IO=0.75A 0.4
0.3 0.6A

0.5A 0.3
0.2
0.2
0.25A
0.1 0.4A
0.1
PQ3RD083
0.2A PQ6RD083
0 0
–25 0 25 50 75 100 125 –25 0 25 50 75 100 125
Junction temperature Tj (˚C) Junction temperature Tj (˚C)

Fig.25 Quiescent Current vs. Junction Fig.26 Quiescent Current vs. Junction
Temperature (PQ05RD08 Series) Temperature (PQ3RD083/PQ6RD083)
5 4.7

Quiescent current Iq (mA)


Quiescent current Iq (mA)

4 4.2

3 3.7
PQ6RD083
PQ3RD083
2 3.2

1 2.7 IO=0A
VIN=8V(PQ6RD083)
VIN=5V(PQ3RD083)
0 2.2
–25 0 25 50 75 100 125 –25 0 25 50 75 100 125
Junction temperature Tj (˚C) Junction temperature Tj (˚C)

Fig.27 Ripple Rejection vs. Input Ripple Fig.28 Ripple Rejection vs. Output Current
Frequency (PQ05RD08 Series) (PQ05RD08 Series)
100 90
PQ05RD08
80
Ripple rejection RR (dB)

PQ05RD08
Ripple rejection RR (dB)

80
PQ09RD08
70 PQ12RD08
60 PQ09RD08 PQ12RD08
60

40 IO=0.5A,ei=0.5Vrms, f=120Hz,ei=0.5Vrms,
VIN=7V(PQ05RD08) 50 VIN= 7V(PQ05RD08 Series)
VIN=11V(PQ09RD08) VIN= 11V(PQ09RD08 Series)
VIN=14V(PQ12RD08) VIN= 14V(PQ12RD08 Series)
20 40
0.1 1 10 100 0 0.5 1.0
Input ripple frequency f (kHz) Output current IO (A)

118
Low Power-Loss Voltage Regulators PQ05RD08 Series/PQ3RD083/PQ6RD083

Fig.29 Output Peak Current vs. Junction


Temperature
1.6
2V VI–O=5V
Output peak current IOP (A)

1.2 1V

0.8 0.5V
10V

0.4
IOP:Output current when
output voltage is 95% in
comparison with the initial value
0
–25 0 25 50 75 100 125
Junction temperature Tj (˚C)

■ Typical Application

Vo
1 3

VIN Cin
4
Load

+
CO
2

ON/OFF signal
High or Open: output ON
Low: Output OFF

119
Application Circuits

NOTICE
●The circuit application examples in this publication are provided to explain representative applications of
SHARP devices and are not intended to guarantee any circuit design or license any intellectual property
rights. SHARP takes no responsibility for any problems related to any intellectual property right of a
third party resulting from the use of SHARP's devices.
●Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
SHARP reserves the right to make changes in the specifications, characteristics, data, materials,
structure, and other contents described herein at any time without notice in order to improve design or
reliability. Manufacturing locations are also subject to change without notice.
●Observe the following points when using any devices in this publication. SHARP takes no responsibility
for damage caused by improper use of the devices which does not meet the conditions and absolute
maximum ratings to be used specified in the relevant specification sheet nor meet the following
conditions:
(i) The devices in this publication are designed for use in general electronic equipment designs such as:
--- Personal computers
--- Office automation equipment
--- Telecommunication equipment [terminal]
--- Test and measurement equipment
--- Industrial control
--- Audio visual equipment
--- Consumer electronics
(ii)Measures such as fail-safe function and redundant design should be taken to ensure reliability and
safety when SHARP devices are used for or in connection with equipment that requires higher
reliability such as:
--- Transportation control and safety equipment (i.e., aircraft, trains, automobiles, etc.)
--- Traffic signals
--- Gas leakage sensor breakers
--- Alarm equipment
--- Various safety devices, etc.
(iii)SHARP devices shall not be used for or in connection with equipment that requires an extremely
high level of reliability and safety such as:
--- Space applications
--- Telecommunication equipment [trunk lines]
--- Nuclear power control equipment
--- Medical and other life support equipment (e.g., scuba).
●Contact a SHARP representative in advance when intending to use SHARP devices for any "specific"
applications other than those recommended by SHARP or when it is unclear which category mentioned
above controls the intended use.
●If the SHARP devices listed in this publication fall within the scope of strategic products described in the
Foreign Exchange and Foreign Trade Control Law of Japan, it is necessary to obtain approval to export
such SHARP devices.
●This publication is the proprietary product of SHARP and is copyrighted, with all rights reserved. Under
the copyright laws, no part of this publication may be reproduced or transmitted in any form or by any
means, electronic or mechanical, for any purpose, in whole or in part, without the express written
permission of SHARP. Express written permission is also required before any use of this publication
may be made by a third party.
●Contact and consult with a SHARP representative if there are any questions about the contents of this
publication.

115

You might also like