You are on page 1of 27

FV926AFW

Service Manual

FV926AFW 1 / 19
TABLE OF CONTENTS
WARNING--------------------------------------------------------------------------------------3

A. IMPORTANT SAFETY INSTRUCTION--------------------------------------3

B. SPECIFICATIONS ---------------------------------------------------------------------4

C. TIMING CHART------------------------------------------------------------------------5

D. ADJUSTMENT PROCEDURE-----------------------------------------------------7

E. TROUBLE SHOOTING HINTS---------------------------------------------------8

F. BLOCK DIAGRAM------------------------------------------------------------------- 12

G. EXPLODED DIAGRAM-------------------------------------------------------------13

H. SCHEMATIC DIAGRAM-----------------------------------------------------------14

I. PCB LAYOUT DIAGRAM----------------------------------------------------------15

FV926AFW 2 / 19
WARNING
To prevent from fire or shock hazard,do not expose monitor to any rain or any form of water.High voltage is
inside the monitor so please do not remove the back cover of the cabinet if you are not a qualified monitor
engineer.Contact the local dealer or the nearest Proview branch office if you need help.

A. IMPORTANT SAFETY INSTRUCTION


Prior to using this service manual,please ensure that you have carefully followed all the procedures outlined in
the user's manual for this product.
1. Read all of these instructions.
2. Save these instructions.
3. Follow all warnings and instructions marked on the product.
4. Unplug this product from the wall outlet before cleaning.Do not use liquid cleaner or aerosol
cleaner, use a damp cloth for cleaning.
5. Do not use this product near water.
6. Do not place this product on an unstable cart,stand or table.The product may fall,causing serious
damage to the product.
7. Slots and openings in the cabinet and the back or bottom are provided for ventilation,to ensure
reliable operation of the product and to protect it from overheating.Those openings must not be
blocked or covered.The openings should never be blocked by placing the product on a bed,sofa, rug,
or other similar surface.This product should not be placed in a built-in installation,since proper
ventilation is provided.
8. This products should be operated with the type of power source indicated on the marked label.
If you are not sure of the type of power is available, consult with your dealer or local power company.
9. This product is equipped with a 3-wire grounding type plug,a plug having a third (grounding)
pin.This plug will only fit into a grounding-type power outlet.This is a safety feature.If you are
unable to insert the plug into the outlet,contact your electrician to replace your obsolete outlet.Do
not damage the purpose of the grounding-type plug.
10. Do not allow anything to rest on the power cord.Do not locate this product where persons will walk
on the cord.
11. Never push any kinds of objects into this product through cabinet slots as they may touch dangerous
voltage points or short out parts that could result in a risk of fire or electric shock.Never spill any kinds
of liquid on the product.
12. Do not attempt to service this product yourself,as opening or removing covers may expose you to
dangerous voltage points or other risk.Refer all servicing to service personnel.
13. Unplug this product from the wall outlet and refer servicing to qualified service personnel under the
following conditions.
a. When the power cord or plug is damaged or frayed.
b. If liquid has been spilled into the product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally,when the operating instructions are followed.Adjust
only those controls involved in the operating instructions ,since improper adjustment of
other controls may result in damage and will often require extra work by a qualified
technician to restore the product to normal operation.
e. If the product has been dropped or the cabinet has been damaged.
f. If the product exhibits a distinct change in performance,indicating a need for service.

FV926AFW 3 / 19
B. SPECIFICATIONS
Panel General Specification
Panel Model CMO M190A1-L01
Screen Diagonal 19.05” TFT
Active Display Area 410.4(H) x 256.5(V) mm
Pixel Pitch 0.285(H) x 0.285(V) mm
Number of Colors 16.2M colors
View Angle
Horizontal +/-75 degree
Vertical -60/+70 degree Typical
Luminance of White 300cd/m²(Typical)
Contrast Ratio (Typical) 500:1

Maximum Resolution 1440 x 900 @ 70Hz


Recommend Resolution 1440 x 900 @ 70Hz
Synchronization Range
Horizontal 31-81.3KHz
Vertical 56–76Hz
Pixel Rate 135 MHz
User Control 5 Key Switch
OSD Function Contrast,brightness,image adjust(H-position,V-position,clock,phase),
Audio(volume,mute),colour(6500K,7500K,9300K,custom colour),
OSD setup(language,OSD H-position,V-position,OSD Timeout),
Advance(Factory Recall),Information.
Power Source 90 – 264 Vac 47-63 Hz
Power Consumption 60 W (max.)
Connection Type Double 15 Pin D-Sub Type;
DVI Type
Input Signal
Video D-Sub: Analog R.G.B. , 0.7Vp-p / 75 Ohms
Digital DVI-I
Sync. TTL level,positive or negative polarity
Color Temperature Cool / Warm /custom colour
Dimension (WxHxD) 458.2 x 369.6 x 192(mm)
Monitor Weight 6.0 kg
Base Operation
Tilt -5 / + 25 degree
Power Saving
ON < 60W
STAND BY < 2W
OFF < 2W
Signal Connector Pin Assignment
D-SUB Pin No. 1. Red Video 6. Red Ground 11. GND
2.Green Video 7. Green Ground 12. SDA For DDC2B
3.Blue Video 8. Blue Ground 13. H-sync.
4.GND 9. +5V from PC 14. V-sync-DDC1
5.Self Test 10. Sync. GND 15. SCL For DDC2B
DVI Pin No. 1.TMDS Data 2- 9. TMDS Data 1- 17. TMDS Data 0-
2.TMDS Data 2+ 10.TMDS Data 1+ 18. TMDS Data 0+
3.TMDS Data 2/4 shield11.TMDS Data 1/3 shield 19. TMDS Data 0/5 shield
4.NC 12.NC 20. NC
5.NC 13.NC 21. NC
6.DDC Clock 14.+5V Power 22. Clock shield
7.DDC Data 15.GND 23. Clock+
8.Analog Vertical Sync16.Hot Plug Detect 24. Clock-
C1.analog red C2.analog green C3.analog blue
C4. analog Horizontal Sync
Sound Output 2Wx2 8Ω Speaker

FV926AFW 4 / 19
C . TIMING CHART
The video signal timing is as following :

Video A: Period
D B E B: Active
C: Sync Width
Sync. D: Back Porch
C A E: Front porch

★ DVI MODE SUPPORT


★ ★ ★ ★ ★ ★ ★

Preset VGA VESA VESA VGA VESA VESA VESA VESA


Modes 640X480 640X480 640X480 720X400 800X600 800X600 800X600 800X600

Dot Rate 25.175MHz 31.500MHz 31.500MHz 28.322MHz 36.000MHz 40.000MHz 50.000MHz 49.500MHz

F.H 31.469KHz 37.861KHz 37.500KHz 31.469KHz 35.156KHz 37.879KHz 48.077KHz 46.875KHz

A-period 31.778us 26.413us 26.667us 31.777us 28.444us 26.400us 20.800us 21.333us

B-Active 25.422us 20.317us 20.317us 25.422us 22.222us 20.000us 16.000us 16.162us

C-Sync. width 3.813us 1.270us 2.032us 3.813us 2.000us 3.200us 2.400us 1.616us

D-Back Porch 1.589us 3.810us 3.810us 1.907us 3.556us 2.200us 1.280us 3.232us

E-Front Porch 0.954us 1.016us 0.508us 0.635us 0.666us 1us 1.12us 0.323us

F.V 59.941Hz 72.810Hz 75.000Hz 70.087Hz 56.250Hz 60.317Hz 72.188Hz 75.000Hz

A-Period 16.683ms 13.734ms 13.333ms 14.268ms 17.778ms 16.579ms 13.853ms 13.333ms

B-Active 15.253ms 12.678ms 12.800ms 12.711ms 17.067ms 15.840ms 12.480ms 12.800ms

C-Sync. width 0.064ms 0.079ms 0.080ms 0.064ms 0.057ms 0.106ms 0.125ms 0.064ms

D-Back Porch 0.794ms 0.528ms 0.427ms 1.112ms 0.626ms 0.607ms 0.478ms 0.448ms

E-Front Porch 0.572ms 0.449ms 0.026ms 0.381ms 0.028ms 0.026ms 0.77ms 0.021ms

H/V SYNC - - - - - - -+ + + + + + + + +

Interlaced NON NON NON NON NON NON NON NON

FV926AFW 5 / 19
★ ★ ★ ★ ★ ★ ★ ★

Preset VESA VESA VESA VESA VESA VESA VESA VESA


Modes 1024X768 1024X768 1024X768 1280X1024 1280X1024 1440X900 1440X900 1440X900

Dot Rate 65.000MHz 75.000MHz 78.750MHz 108.00MhZ 135.00MHz 88.750MHz 106.50MHz 136.75MHz

F.H 48.363KHz 56.476KHz 60.023KHz 63.98KHz 79.976KHz 55.469KHz 55.935KHz 70.635KHz

A-period 20.677us 17.707us 16.660us 15.630us 12.504us 18.028us 17.878us 14.157us

B-Active 15.754us 13.653us 13.003us 11.852us 9.481us 16.225us 13.521us 10.530us

C-Sync. width 2.092us 1.813us 1.219us 1.037us 1.067us 0.361us 1.427us 1.112us

D-Back Porch 2.462us 1.920us 2.235us 2.296us 1.837us 0.901us 2.178us 1.814us

E-Front Porch 0.369us 0.321us 0.203us 0.444us 0.119us 0.541us 0.751us 0.702us

F.V 60.004Hz 70.069Hz 75.029Hz 60.020Hz 75.025Hz 59.901Hz 59.887Hz 74.984Hz

A-Period 16.666ms 14.272ms 13.328ms 16.661ms 13.329ms 16.694ms 16.698ms 13.336ms

B-Active 15.880ms 13.599ms 12.795ms 16.005ms 12.804ms 16.225ms 16.090ms 12.741ms

C-Sync. width 0.124ms 0.106ms 0.050ms 0.047ms 0.038ms 0.108ms 0.107ms 0.085ms

D-Back Porch 0.600ms 0.513ms 0.466ms 0.594ms 0.475ms 0.306ms 0.447ms 0.467ms

E-Front Porch 0.062ms 0.054ms 0.017ms 0.016ms 0.013ms 0.054ms 0.054ms 0.042ms

H/V SYNC - - - - + + + + + + + - - + - +

Interlaced NON NON NON NON NON NON NON NON

FV926AFW 6 / 19
D. ADJUSTMENT PROCEDURE

ITEM ﹟Test Meter Check


﹡Test Point Operation Value
Program Menu. ﹫Pattern

Power supply ﹟Digital Voltmeter 1. Plug power cable into the LCD monitor directly. 220Vac
Check ﹡CON101 2. Make sure the voltage of the power plug (CON101) ±0.2V
A ﹫Crosshatch Pattern on the Power Board to the value shown at right.
(1280x1024, 60Hz)

Power Saving ﹟Wattmeter 1. Unplug the signal cable into the monitor.
Check ﹟PC or Pattern 2. Turn the power switch of the monitor ON.
generator 3. Check monitor power indicator light up blue
B ﹫Crosshatch Pattern flashing every other second. ‹ 2W
(1280x1024, 60Hz) 4. Make sure the wattmeter value shown at right.
5. OSD will be display “NO SIGNAL” Picture.

Into Factory ﹟PC or Pattern 1. Hold Down key,then turn the power switch of the
mode generator monitor OFF.
﹫Crosshatch Pattern 2. Hold Up key,then turn the power switch of the
C
(1280x1024, 60Hz) monitor ON.
3. You can enter factory adjustment mode.

Auto mode ﹟PC or Pattern 1.Press and release the Auto key to adjust display
Check generator mode to its utmost performance according to VGA
﹫Crosshatch Pattern setting.
D
(1280x1024, 60Hz)

White ﹟PC or Pattern 1. Move the OSD to the COLOR mode (AUTO COLOR).
Balance generator 2. set color is Cool using the OSD,Check the value
Adjust ﹫White Pattern shown at right.
(1280x1024, 60Hz) Y = 230±20cd/m^2 x = 0.283±0.02 y = 0.297±0.02
E
3. set color is Warm using the OSD,Check the value
shown at right.
Y = 230±20cd/m^2 x = 0.313±0.02 y = 0.329±0.02

1. Move the OSD to the OSD setting mode


OSD ﹟PC or Pattern 2. Move the OSD to the LANGUAGE mode.
F Language generator 3. You can choose one of the language you need.
Setting

FV926AFW 7 / 19
E . TROUBLE SHOOTING HINTS
No Display
( Black )

NO NO Change
LED ON ? Power
Supply ? power
board

YES YES

Push the power


ON/OFF switch

LED Color YES Back light YES


To Step 2
change ? ON?

NO NO

Check main Check the


board CON201/Pin1,2 of High Voltage !
CON1/Pin1 power board

Make sure the


connection of
Hi / Lo under +12V ? NO
power board is
push power
sw?
fine

YES YES

NO NO
Display ?
To Step 2

Check
A Power board
YES

Nice Job !
B

FV926AFW 8 / 19
A B

Check the NO
connection of Hi / Lo under Change the
control cable push power sw? main board

YES

Display ? Change the


YES
power board

NO Nice Job !

Display ? YES
Nice Job !
Change the
main board
NO

To Step 2

NO
Check the main Check
board +12V input? CN1/Pin1,2

YES

NO
Check the main Check
board +5.0 V ? CN1/Pin5,6

YES

FV926AFW 9 / 19
C

Check the main


NO Check
board 3.3V input ?
U2

YES

Check 1.8V NO Check


Input Q3

YES

NO
Check H/V Check
input Signal ? U7/Pin37,38

YES

Display ? NO Change
Signal Cable

YES

Nice Job !

FV926AFW 10 / 19
No display
(White)

Check the main NO Check


board 5V ? CN1/Pin5,6

YES

NO
+3.3V ? Check
U2

YES

NO
H/V Input Check
U7/Pin37,38
Signal ?

YES

NO Change
Display ?
Signal Cable

YES

Nice Job !

FV926AFW 11 / 19
F. BLOCK DIAGRAM
B3 B4

RIN0 RIN0
GNDR0 GNDR0
GIN0 GIN0
GNDG0 GNDG0
BIN0 BIN0
GNDB0 GNDB0
PC5V0 SOGIN0 SOGIN0
+5V HSYNC0 HSYNC0
VSYNC0 VSYNC0
B5
DVI5V RIN1 RIN1 PA[0..9]
PC5V0 GNDR1 GNDR1 PA[0..9] PB[0..9] PA[0..9]
VCC5V GIN1 GIN1 PB[0..9] PB[0..9]
GNDG1 GNDG1
BIN1 BIN1 VCC3.3
+5V GNDB1 GNDB1
SOGIN1 SOGIN1 VLCD
HSYNC1 HSYNC1
VSYNC1 VSYNC1 VCC3.3
DVI5V OD_EN OD_EN
R+ R+
R- R-
VCC5V G+ G+ VLCD
G- G-
B+ B+
B- B-
CLK+ CLK+
CLK- CLK-

DDC_SCL DDC_SCL 5.PANEL INTERFACE


DDC_SDA DDC_SDA
B6 +12V
DDCD_SCL DDCD_SCL
DDCD_SDA DDCD_SDA

ST_DET0 ST_DET0 MUTE MUTE


ST_DET1 ST_DET1
ST_DET2 ST_DET2
Volume Volume +12V

3.INPUT
+5V
VCC3.3 +5V
B2
+12V VCC1.8 DVI5V VCC5V
VLCD
PC5V0 VCTRL VCTRL +5V

VCC5V BKLT_ADJ BKLT_ADJ


6.AUDIO
VCC1.8
+5V
+5V
DVI5V
VCC3.3 BKLT_EN BKLT_EN VCC1.8 VCC3.3
VLCD
+5V
VCC1.8 PANELVCC_EN PANELVCC_EN

PC5V0
VCC3.3
+12V

2.POWER

4.SCALER

FV926AFW 12 / 19
G. EXPLODED DIAGRAM

FV926AFW 13 / 19
H. SCHEMATIC DIAGRAM

FV926AFW 14 / 19
5 4 3 2 1

D
TSUM66AJ SCHEMATIC D

B3 B4

RIN0 RIN0
GNDR0 GNDR0
GIN0 GIN0
GNDG0 GNDG0
BIN0 BIN0
GNDB0 GNDB0
PC5V1 SOGIN0 SOGIN0
+5V HSYNC0 HSYNC0
VSYNC0 VSYNC0
B5
DVI5V RIN1 RIN1 PA[0..9]
PC5V1 GNDR1 GNDR1 PA[0..9] PB[0..9] PA[0..9]
VCC5V GIN1 GIN1 PB[0..9] PB[0..9]
GNDG1 GNDG1
BIN1 BIN1 VCC3.3
+5V GNDB1 GNDB1
SOGIN1 SOGIN1 VLCD
HSYNC1 HSYNC1
VSYNC1 VSYNC1 VCC3.3
DVI5V OD_EN OD_EN
C R+ R+ C
R- R-
VCC5V G+ G+ VLCD
G- G-
B+ B+
B- B-
CLK+ CLK+
CLK- CLK-

DDC_SCL DDC_SCL 5.PANEL INTERFACE


DDC_SDA DDC_SDA
B6 +12V
DDCD_SCL DDCD_SCL
DDCD_SDA DDCD_SDA

ST_DET0 ST_DET0 MUTE MUTE


ST_DET1 ST_DET1
ST_DET2 ST_DET2
Volume Volume +12V

3.INPUT
+5V
VCC3.3 +5V
B2
+12V VCC1.8 DVI5V VCC5V
B VLCD B
PC5V1 VCTRL VCTRL +5V

VCC5V BKLT_ADJ BKLT_ADJ


6.AUDIO
VCC1.8
+5V
+5V
DVI5V
VCC3.3 BKLT_EN BKLT_EN VCC1.8 VCC3.3

VLCD
+5V
VCC1.8 PANELVCC_EN PANELVCC_EN

PC5V1
VCC3.3
+12V

2.POWER
APPROVE BY CHECK BY PREPARE BY
A A
4.SCALER 許許許
Title
200-100-2A1D-BH
Size Document Number Rev
B TOP B
Date: Tuesday, February 21, 2006 Sheet 1 of 6
5 4 3 2 1
5 4 3 2 1

33K +5V
BL_CTRL R1

Q1 SOT-263

3
C1 1 R2 4.7K
BKLT_EN 4 VCC3V3_PANEL
+5V
B1206
0.1u U1 FB1
MMBT3904

2
D D
3 VI VO 2 1 2
MLB-201209-0220P-N2

VO 4

ADJ
+5V C2
VCTRL 4
BRT_LEVEL R4 1K 0.1uF C3 C4
100uF/16V 0.1uF R5
Q2

3
C5 10K

1
1 R6 4.7K
BKLT_ADJ 4
50
1u VCC1.8

MMBT3904 5/4 modified


2
VCC1.8 4
+ C6
CN1 4.7uF/16V
D1
10 BL_CTRL
9 BRT_LEVEL
8 B1206

C
FB2 +5V 1N4148
7
B R7
6 Q3
5 1 2
MLB-201209-0220P-N2 5/17 del C8 2K
4 + C7 D2 CHT2907

E
3 TC1 0.1uF
2 220uF/25V C0603 1N4148
C 1 C

HEADER5X2 DVI5V PC5V1 R8

F1 100
3 DVI5V PC5V1 3
24V/5A R9 R10
+12V
0 0
FB3 B1206
1 2
MLB-201209-0220P-N2
+5V
+ C9

1
TC2 0.1uF
220uF/25V C0603
3,4,6 +5V
D4 D3
VCC5V
SSM12L BAT54C-GS08U2
SOT-263
VCC3.3
LT1084-33

3
+12V +12V 6 3 VCC5V 3 VI VO 2 VCC3.3 4,5
B 9/14 modified 4 C10 B
VO

ADJ
S1 and S2 C11 + C12
VLCD
change to S3
0.1uF 100uF/16V 0.1uF
VCC3V3_PANEL and S5
S3 U3

1
2 1 1 S D 8 VLCD 5
2 S D 7
3 S D 6
+5V S5 4 G D 5
2 1
R11 Si9435-SO8
10K R12 C13

0.1uF
100

+ TC3 C14 C15

220uF/16V 0.1uF 0.1uF


3

R13
4 PANELVCC_EN 1 Q4 APPROVE BY CHECK BY PREPARE BY
A 4K7 C16 MMBT3904 H4 H1 H3 A

許許許
2

0.1uF
8
7
6

8
7
6
8
7
6

5 5 5
8
7
6

8
7
6
5 5
8
7
6

5 Title
4 4 4 4 4
4
1
2
3

1
2
3
1
2
3

TP TP TP 200-100-2A1D-BH
Size Document Number Rev
1
2
3

1
2
3
1
2
3

B POWER B
Date: Tuesday, February 21, 2006 Sheet 2 of 6
5 4 3 2 1
5 4 3 2 1
CN2
DB15
11 1 FB4 56Ω 1/16W R14 Bead 60R C17 0.047uF
RIN0 4
6
12 2 FB5 56Ω 1/16W R15 Bead 60R C18 0.047uF
GIN0 4
7
13 3 FB6 56Ω 1/16W R16 Bead 60R C19 0.047uF
BIN0 4
8
R17 470Ω 1/16W C20 1000pF

75Ω 1/16W

75Ω 1/16W
14 4 SOGIN0 4
PC5V0 R18 C21 C22 C23

R20
9
VGA0_CON

R19
15 5
10 75Ω 1/16W NC NC NC

R21 100Ω 1/16W C24 0.047uF


GNDR0 4
17

16

R22 100Ω 1/16W C25 0.047uF


GNDG0 4
R23 100Ω 1/16W C26 0.047uF
GNDB0 4

3
A1 D5 D6 D7
BAV99 BAV99 BAV99 +5V
D D
+5V
R24
C27 0.1uF C28 0.1uF C29 0.1uF
10KΩ 1/16W
2

1
+5V 2,4,6

R25 100Ω 1/16W


ST_DET0 4 +5V PC5V0
HSI0 FB7 120 OHM BEAD R26 1KΩ 1/16W
HSYNC0 4

1
VSI0 R27 100Ω 1/16W R28 1KΩ 1/16W
VSYNC0 4
D16

BAT54C-GS08
D8 D9 R29 C30 R30 C31 D10
MLL5232B 5.6V MLL5232B 5.6V MLL5232B 5.6V

3
2.2KΩ 1/16W 33pF 2.2KΩ 1/16W 33pF R31 R32 C32
10KΩ 1/16W U4
10KΩ 1/16W 8 1 0.1uF/NC
VCC A0
7 WP A1 2
CLK_DDC0 R33 100Ω 1/16W 6 3
DAT_DDC0 R34 100Ω 1/16W SCL A2
5 SDA GND 4

C108 AT24C02N-10SC/NC
D11 D12
C109 MLL5232B 5.6V MLL5232B 5.6V 100pF ΒΜΙ«²Ώ·ΦΚΗΠΒΤφµ∆ΤΌώ.ΝυΞ∆Θπ;

100pF
by worry
CN3
DB15
11 1 FB8 56Ω 1/16W R35 Bead 60R C33 0.047uF
RIN1 4
6
12 2 FB9 56Ω 1/16W R36 Bead 60R C34 0.047uF
GIN1 4
7
13 3 FB10 56Ω 1/16W R37 Bead 60R C35 0.047uF
BIN1 4
8
R38 470Ω 1/16W C36 1000pF
75Ω 1/16W

75Ω 1/16W
14 4 SOGIN1 4
R39 C37 C38 C39

R41
9 PC5V1
PC5V1 2
R40

15 5 VGA1_CON
C 10 75Ω 1/16W NC NC NC C

R42 100Ω 1/16W C40 0.047uF


GNDR1 4
17

16

R43 100Ω 1/16W C41 0.047uF


GNDG1 4
R44 100Ω 1/16W C42 0.047uF
GNDB1 4
3

A2 D13 D14 D15


BAV99 BAV99 BAV99 +5V

+5V
R45
C43 0.1uF C44 0.1uF C45 0.1uF
10KΩ 1/16W
2

R46 100Ω 1/16W


ST_DET1 4
HSI1 FB11 120 OHM BEAD R47 1KΩ 1/16W
HSYNC1 4 VCC5V

VSI1 R48 100Ω 1/16W R49 1KΩ 1/16W VCC5V 2


VSYNC1 4

D17 D18 R50 C46 R51 C47 D19


MLL5232B 5.6V MLL5232B 5.6V MLL5232B 5.6V
2.2KΩ 1/16W 33pF 2.2KΩ 1/16W 33pF R53 C48
R52 10KΩ 1/16W U5
10KΩ 1/16W 8 1 0.1uF
VCC A0
7 WP A1 2
CLK_DDC1 R54 100Ω 1/16W 6 3
DAT_DDC1 R55 100Ω 1/16W SCL A2
5 SDA GND 4

C104 D21 AT24C02N-10SC


D20 MLL5232B 5.6V C105
100pF MLL5232B 5.6V
100pF 4 DDC_SDA
4 DDC_SCL

B B

VCC5V

R56 R57 C49


10KΩ 1/16W U6
CN4 10KΩ 1/16W 0.1uF /NC
8 VCC A0 1
7 WP A1 2
R 25 4 DDCD_SCL 6 SCL A2 3
G 26 4 DDCD_SDA 5 SDA GND 4
B 27
RGB GND 29
28 DVI5V AT24C02N-10SC/NC
HSYNC
VSYNC 8
SYNC GND 15 DVI5V 2
6 CLK_DDC2 R58 100Ω 1/16W
DDC SCL DAT_DDC2 R59 100Ω 1/16W R60
DDC SDA 7
14 10KΩ 1/16W
+5V R61 100Ω 1/16W
HPD 16 ST_DET2 4
11 C50
1/3shield D22 D23 D24
2/4shield 3
19 C106 LL5232B 5.6V 5%C107 LL5232B 5.6V 5% LL5232B 5.6V 5% 0.1uF
0/5shield
clk shield 22
100pF 100pF
18 R62 10Ω 1/16W
DAT0+ B+ 4
17 R63 10Ω 1/16W
DAT0- B- 4
10 R64 10Ω 1/16W
DAT1+ G+ 4
9 R65 10Ω 1/16W
DAT1- G- 4
2 R66 10Ω 1/16W
DAT2+ R+ 4
1 R67 10Ω 1/16W
DAT2- R- 4
DAT3+ 13
DAT3- 12
DAT4+ 5
DAT4- 4
DAT5+ 21
DAT5- 20
23 R68 10Ω 1/16W
A clk+ CLK+ 4 A
24 R69 10Ω 1/16W
clk- CLK- 4
m1

m2

JACK DVI D25 D26 D27 D28 D29 D30 D31 D32
m1

m2

BAV99 BAV99 BAV99 BAV99 BAV99 BAV99 BAV99 BAV99 +5V

R70 10K
C51 C52 C53 C54 C55 C56 C57 C58
D33
APPROVE BY CHECK BY PREPARE BY
3.6V 5%
2

0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF


許許許
Title
200-100-2A1D-BH
Size Document Number Rev
Custom INPUT B
Date: Tuesday, February 21, 2006 Sheet 3 of 6
5 4 3 2 1
5 4 3 2 1

VMPLL
VDDP
AVDD VDVI VDDP VDDC VCC3.3
VCC3.3
FB12

2,5 VCC3.3

124

113

103
600 OHM

16

14

41
64
69
73
83
93

42
66
84
U7

8
+
CN5 C59
VCTRL 2

VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
VDDP
AVDD_ADC
AVDD_MPLL

VDDC
VDDC
VDDC
VDDC
AVDD_DVI
AVDD_DVI
3 RIN0 32 10uF/16V
1 RIN0P PA[0..9]
2 3 GNDR0 31 RIN0M VCTRL 102 PA[0..9] 5
29 71 PA0 C60 C61 C62 C63 C64 C65 C66
3 3 GIN0 GIN0P LVA3P
28 72 PA1 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF
D 4 3 GNDG0 GIN0M LVA3M D
30 75 PA2
3 SOGIN0 SOGIN0 LVACKP
JWT-A2001WV2-04 27 76 PA3
3 BIN0 BIN0P LVACKM
26 77 PA4
3 GNDB0 BIN0M LVA2P
38 78 PA5
3 VSYNC0 VSYNC0 LVA2M
37 79 PA6
3 HSYNC0 HSYNC0 LVA1P
40 80 PA7 VCC3.3 FB13 VDVI
3 DDC_SCL DDCA_SCL/RS232_RX LVA1M
39 81 PA8
3 DDC_SDA DDCA_SDA/RS232_TX LVA0P
82 PA9
LVA0M PB[0..9] 2,5 VCC3.3
600 OHM
PB0 PB[0..9] 5
3 RIN1 24 85 C67 +
RIN1P LVB3P PB1 10uF/16V
3 GNDR1 25 RIN1M LVB3M 86
22 87 PB2
3 GIN1 GIN1P LVBCKP
23 88 PB3
3 GNDG1 GIN1M LVBCKM
21 89 PB4 C68 C69
3 SOGIN1 SOGIN1 LVB2P
19 90 PB5 0.1uF 0.1uF
3 BIN1 BIN1P LVB2M
20 91 PB6
3 GNDB1 BIN1M LVB1P
17 92 PB7
3 HSYNC1 HSYNC1 LVB1M
18 95 PB8
3 VSYNC1 VSYNC1 LVB0P
96 PB9 VCC3.3 FB14 VMPLL
LVB0M +5V
3 R+ 3 52 VCC3.3
R+ NC 2,5 VCC3.3
3 R- 4 55 600 OHM
R- NC R71 C70 +
3 G+ 6 G+ NC 56
3 G- 7 TSUM66AJ 57 10uF/16V
G- NC 10KΩ 1/16W
3 B+ 9 B+ NC 58
R73 R75 R77 R79R81
3 B- 10 B- NC 59
R80 R82 C71
3 CLK+ 12 CK+ NC 60 R72 R74 R76 R78

3.3KΩ 1/16W/NC
0.1uF

3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3.3KΩ 1/16W
3 CLK- 13 CK- NC 61
3 DDCD_SCL 128 62 R83
DDCD_SCL NC
C 3 DDCD_SDA 127 DDCD_SDA NC 63 C
15 20KΩ 1/16W 5/4
AVDD REXT
R84 390Ω 1/16W 108 modified
VCC3.3 7/ 15 Add RSTN VCC3.3 FB15 AVDD
C101 1uF C72 0.1uF 34 109 AUTO
+5V REFP GPIO_P00/SAR1 MENU
33 REFM GPIO_P01/SAR2 110 2,5 VCC3.3
U8 UP 600 OHM
97 NC GPIO_P02/SAR3 111
8 2 44 121 DOWN 7/ 15 C73 +
C75 VDD SDO SDO GPIO_P14 LEDG 10uF/16V
7 HOLD# CE# 1 45 CSZ GPIO_P13 120 modify
C76 3 6 46 106 LEDO
0.1uF WP# SCK SCK GPIO_P12 POWER
4 VSS SDI 5 47 SDI GPIO_P07 118
10uF/16V 117 C74
GPIO_P06 ST_DET0 3
116 0.1uF
GPIO_P05 ST_DET1 3
SST25VH010 105 115
RST GPIO_P04 ST_DET2 3
GPIO_P03 114 OD_EN 5
C77 22pF 48 VCC1.8 FB16 VDDC
GPIO_P23 PANELVCC_EN 2
R85 X1 122 49
XIN GPIO_P22 BKLT_EN 2
PWM0/GPIO_P26 119 BKLT_ADJ 2 2 VCC1.8
8.2K VCC3.3 14.318MHz 107 600 OHM
PWM1/GPIO_P25 Volume 6
123 XOUT PWM2/GPIO_P24 53
R86 C79 +
GPIO_P15/PWM0 43 MUTE 6
R87 C78 22pF 5/ 4 4.7uF/16V
67 MODE[0] GPIO_P27/PWM1 54
70 MODE[1] GPIO_P16/PWM2 126 modify
C80 C81 C82 C83
NC 100 51 0.1uF 0.1uF 0.1uF 0.1uF
NC BYPASS GPIO_P10/I2C_MCL
GPIO_P11/I2C_MDA 50
VCC3.3
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND
GND

R88 R89 C85


C84
101
104
112
125

10KΩ 1/16W
11
35
36
65
68
74
94
98
99

B B
10KΩ 1/16W R90 R91 0.1uF
1
2
5

0.1uF U9 24C16
3.3K 3.3K 8 1
VCC A0
7 WP A1 2
R92 100 6 3
R93 100 SCL A2
5 SDA GND 4

+5V

+5V
+5V 2,3,6
VCC3.3 VCC3.3

R97 R98 R94 R95 R96


5/4 modified 330
330 330 CON1
5/3 modified POWER R99 100
3.3K 3.3K LED_O 1
2
3

LED_G
LEDO R100 1K 1 Q5 DOWN R101 100 3
MMBT3904 UP R102 100 4
5
3

MENU R103 100


LEDG R104 1K Q6 AUTO R105 100 6
1
2

MMBT3904 7
8
2

A A

to KEY PAD
C86 C87 C88 C89 C90 C91 C92
APPROVE BY CHECK BY PREPARE BY
0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF 0.1uF
許許許
Title
200-100-2A1D-BH
Size Document Number Rev
Custom SCALER B
Date: Tuesday, February 21, 2006 Sheet 4 of 6
5 4 3 2 1
5 4 3 2 1

VLCD

2 VLCD
PA[0..9]
D 4 PA[0..9] D
PA0 LVB3P
PA1 LVB3M
PA2 LVBCKP
PA3 LVBCKM
PA4 LVB2P C93 C94 JP1
PA5 LVB2M
NC/100uF/16V 0.1uF 1
PA6 LVB1P 2
PA7 LVB1M R106 100 3
VCC_TEST 4
4 OD_EN 5
PA8 LVB0P
PB[0..9] PA9 LVB0M 6
4 PB[0..9] LVA3P 7
PB0 VCC3.3 RXEIN3+ LVB3P
PB1 LVA3M RXEIN3- LVB3M 8
PB2 LVACKP R107 NC RXECKIN+ LVBCKP 9
PB3 LVACKM RXECKIN- LVBCKM 10
RXEIN2+ LVB2P 11
PB4 LVA2P RXEIN2- LVB2M 12
C
1331 31 C
PB5 LVA2M
PB6 LVA1P RXEIN1+ LVB1P 14
R108 NC 1532 32
PB7 LVA1M RXEIN1- LVB1M
PB8 LVA0P 16
PB9 LVA0M RXEIN0+ LVB0P 17
RXEIN0- LVB0M 18
RXOIN3+ LVA3P 19
RXOIN3- LVA3M 20
RXOCKIN+ LVACKP 21
RXOCKIN- LVACKM 22
23
JP2 RXOIN2+ LVA2P 24
RXOIN0+ RXOIN0- RXOIN2- LVA2M 25
RXOIN1+ 1 2 RXOIN1- RXOIN1+ LVA1P 26
RXOIN2+ 3 4 RXOIN2- RXOIN1- LVA1M 27
RXOCKIN+ 5 6 RXOCKIN- RXOIN0+ LVA0P 28
RXOIN3+ 7 8 RXOIN3- RXOIN0- LVA0M 29
B
RXEIN0+ 9 10 RXEIN0- 30 B
RXEIN1+ 11 12 RXEIN1- CON30
RXEIN2+ 13 14 RXEIN2-
RXECKIN+ 15 16 RXECKIN-
VLCD RXEIN3+ 17 18 RXEIN3-
VCC_TEST 19 20
21 22 VCC3.3
23 24
25 26
C95 VCC3.3 2,4
3/28 modified
0.1uF HEADER 12X2
R109
APPROVE BY CHECK BY PREPARE BY
10K (NC)

VCC_TEST 許許許
A FOR 19" FSC PANEL A

R110 Title
0(NC) 200-100-2A1D-BH
Size Document Number Rev
A PANEL INTERFACE B
Date: Tuesday, February 21, 2006 Sheet 5 of 6
5 4 3 2 1
5 4 3 2 1

+12V

+12V 2 D34

+5V 4148/NC C100


5/4 modify 0.1UF/NC R111
R112 10K/NC
D 2,3,4 +5V D
R113 47K/NC
22K/NC
U_GND
R128 D35 U_GND +12V
10K/NC +12V 2

3
4148/NC
CN6 R115 4.7K/NC Q7 R116 TC4 R114
1

3
MMBT3904L/NC 33K/NC 10K/NC
1 R117 4.7K/NC Q8 0.47uF/16V /NC
2 4 MUTE 1
MMBT3904L TC5 C96

2
3 220uF/NC 0.1uF/NC
U_GND

2
SPEAKER/NC U_GND U_GND
L1/NC R118 U_GND U_GND
BW FCM1608K-300T07 1K/NC
1 2 C97 0.47UF/NC
U_GND U_GND

1 2 C98 0.47UF/NC U10


L2/NC

13
18
19
20

15
16
CN7

7
BW FCM1608K-300T07 R119
1K/NC Q9 U_GND TC6

G3
G4
G5
G6
G7

VAO_R

Vs
Vs
1

3
4.7K/NC MMBT3904L/NC 2 14
C
R121 G2 OUTR 2 C
4 VOLUME 1 1 G1
R122 R123 Value 11 Rout/NC
47K/NC 47K/NC STBY 220uF/NC U_GND CN8
R120 4 INL MUTE 12

VAO_L
U_GND R124 TC7
9

2
INR 1

VOL
10K/NC R125 10 17
2K/NC SVR OUTL 2
R126 Lout/NC
330/NC +5V TC8 220uF/NC

5
220uF/NC U_GND
TDA7496L/NC

U_GND U_GND +5V U_GND U_GND 5/4 modify U_GND

5/4 modify R127300K/NC


C99
L3 0.1UF/NC

BEAD/NC
U_GND
L4

BEAD/NC
B B

U_GND

APPROVE BY CHECK BY PREPARE BY


A A
許許許
Title
200-100-2A1D-BH
Size Document Number Rev
B Audio B
Date: Tuesday, February 21, 2006 Sheet 6 of 6
5 4 3 2 1
聯昌電子企業股份有限公司
LC Electronic Co., Ltd.

4
3

4
1

2
1

1 1 7 6 6
2 2
8 8
4 4 5 3 3

*Copy-right LIEN CHANG Electronic Enterprise Co., Ltd.


No copy & disclosure is Allowed. All Right Reserved by LIEN CHANG.
聯昌電子企業股份有限公司
LC Electronic Co., Ltd.

*Copy-right LIEN CHANG Electronic Enterprise Co., Ltd.


No copy & disclosure is Allowed. All Right Reserved by LIEN CHANG.
I. PCB LAYOUT DIAGRAM
Main Board

FV926AFW 15 / 19
Power+Inverter Board
Top layer

FV926AFW 16 / 19
Bottom layer

FV926AFW 17 / 19
Control Board

Earphone Board

FV926AFW 18 / 19
MEMO

FV926AFW 19 / 19

You might also like